+#: lib/ui/stdtoolbars.inc:1496
+msgid "High rising (tone letter)"
+msgstr "急升 (音调)"
+
+#: lib/ui/stdtoolbars.inc:1497
+msgid "Low rising (accent)"
+msgstr "缓升 (附加符)"
+
+#: lib/ui/stdtoolbars.inc:1498
+msgid "Low rising (tone letter)"
+msgstr "缓升 (音调)"
+
+#: lib/ui/stdtoolbars.inc:1499
+msgid "Rising-falling (accent)"
+msgstr "升降 (附加符)"
+
+#: lib/ui/stdtoolbars.inc:1500
+msgid "Rising-falling (tone letter)"
+msgstr "升降 (音调)"
+
+#: lib/ui/stdtoolbars.inc:1501
+msgid "Global rise"
+msgstr "整体升"
+
+#: lib/ui/stdtoolbars.inc:1502
+msgid "Global fall"
+msgstr "整体降"
+
+#: lib/xtemplates/chess.xtemplate:14
+msgid "ChessDiagram"
+msgstr "ChessDiagram"
+
+#: lib/xtemplates/chess.xtemplate:15 lib/xtemplates/chess.xtemplate:34
+msgid "Chess diagram"
+msgstr "棋局图"
+
+#: lib/xtemplates/chess.xtemplate:17
+msgid ""
+"A chess position diagram.\n"
+"This template will use XBoard to edit the position.\n"
+"Use the 'File->Save Position' in XBoard to save\n"
+"the position that you want to display.\n"
+"Make sure to give it a '.fen' extension\n"
+"and remember to type in a relative path\n"
+"to the LyX document location.\n"
+"Within XBoard, use 'Edit->Edit Position'\n"
+"to enable general editing of the board.\n"
+"You might also check out the\n"
+"'Options->Test legality' option, and\n"
+"remember to middle and right click to\n"
+"insert new material in the board.\n"
+"In order for this to work, you have to\n"
+"put the bundled lyxskak.sty in a place\n"
+"that TeX will find it, and you will need\n"
+"to install the skak package from CTAN.\n"
+msgstr ""
+"棋局图。\n"
+"本模板使用 XBoard 编辑棋局。\n"
+"在 XBoard 里使用\n"
+"“文件(File)->保存棋局(Save Position)”\n"
+"保存您想要的棋局。\n"
+"请注意使用“.fen”扩展名，并记得输入\n"
+"相对于 LyX 文档的路径。\n"
+"在 XBoard 中，使用\n"
+"“编辑(Edit)->编辑棋局(Edit Position)”\n"
+"编辑棋局。您亦可以使用\n"
+"“选项(Options)->验证(Test legality)”\n"
+"验证棋局是否合法，并记得点击中键和\n"
+"右键在棋局中插入新元素。\n"
+"您需要将 lyxskak.sty 放在 TeX 能找到的\n"
+"地方，并安装 skak 包。\n"
+
+#: lib/xtemplates/dia.xtemplate:14
+msgid "Dia"
+msgstr "Dia"
+
+#: lib/xtemplates/dia.xtemplate:15 lib/xtemplates/dia.xtemplate:18
+msgid "Dia diagram"
+msgstr "Dia 图形"
+
+#: lib/xtemplates/dia.xtemplate:17
+msgid "Dia diagram.\n"
+msgstr "Dia 图形。\n"
+
+#: lib/xtemplates/gnumeric.xtemplate:13
+msgid "GnumericSpreadsheet"
+msgstr "GnumericSpreadsheet"
+
+#: lib/xtemplates/gnumeric.xtemplate:14 lib/xtemplates/gnumeric.xtemplate:21
+#: lib/examples/Articles:0
+msgid "Spreadsheet"
+msgstr "电子表格"
+
+#: lib/xtemplates/gnumeric.xtemplate:16
+msgid ""
+"A spreadsheet made with Gnumeric, LibreOffice, OpenOffice or Excel.\n"
+"It imports as a multi-page table, so any length\n"
+"is ok. Excessive width could be a problem.\n"
+"The gnumeric software is necessary for conversion,\n"
+"both for gnumeric and excel files.\n"
+msgstr ""
+"使用 Gnumeric, LibreOffice, OpenOffice or Excel 制作的表格。\n"
+"以跨页表导入，故长度不是问题，但过宽的表可能是个问题。\n"
+"若需要转换，无论是 Gnumeric 文件还是 Excel 文件，\n"
+"均需安装 Gnumeric。\n"
+
+#: lib/xtemplates/inkscape.xtemplate:38
+msgid "Inkscape"
+msgstr "Inkscape"
+
+#: lib/xtemplates/inkscape.xtemplate:39 lib/xtemplates/inkscape.xtemplate:44
+msgid "Inkscape figure"
+msgstr "Inkscape 图"
+
+#: lib/xtemplates/inkscape.xtemplate:41
+msgid ""
+"An Inkscape figure.\n"
+"Note that using this template automatically uses the \n"
+"document text in the image (like with the Xfig template).\n"
+msgstr ""
+"Inkscape 绘图。\n"
+"注意：使用此模板将自动使用文档中的字体 (如 Xfig 模板一样)。\n"
+
+#: lib/xtemplates/lilypond.xtemplate:15 lib/xtemplates/lilypond.xtemplate:21
+msgid "Lilypond typeset music"
+msgstr "Lilypond 排版乐谱"
+
+#: lib/xtemplates/lilypond.xtemplate:17
+msgid ""
+"Sheet music typeset by GNU LilyPond,\n"
+"converted to .pdf or .eps for inclusion\n"
+"Using .eps requires at least lilypond 2.6\n"
+"Using .pdf requires at least lilypond 2.9\n"
+msgstr ""
+"GNU LilyPond 排版的乐谱。\n"
+"若需嵌入该文档需转换为 PDF 或 EPS 格式。\n"
+"转换为 EPS 格式需要 LilyPond 2.6 及以上版本。\n"
+"转换为 PDF 格式需要 LilyPond 2.9 及以上版本。\n"
+
+#: lib/xtemplates/pdfpages.xtemplate:13
+msgid "PDFPages"
+msgstr "PDFPages"
+
+#: lib/xtemplates/pdfpages.xtemplate:14 lib/xtemplates/pdfpages.xtemplate:28
+msgid "PDF pages"
+msgstr "PDF 页面"
+
+#: lib/xtemplates/pdfpages.xtemplate:16
+msgid ""
+"Includes PDF documents, using the 'pdfpages' package.\n"
+"To include multiple pages, use the 'pages'-option,\n"
+"which must be inserted to 'Options'.\n"
+"Examples:\n"
+"* pages={x-y} (for a range of pages)\n"
+"* pages={x,y,z} (for specific pages)\n"
+"* pages=- (to include all pages)\n"
+"* pages=last-1 (to include all pages in reverse order)\n"
+"With the option 'noautoscale' the PDF pages are\n"
+"inserted in their original size.\n"
+"Read the documentation of the pdfpages package\n"
+"for further options and details.\n"
+msgstr ""
+"使用 pdfpages 包，嵌入 PDF 文档。\n"
+"若需要嵌入多页，必须在“选项”中使用 pages 选项。\n"
+"例如：\n"
+"* pages={x-y} (从第 x 页到第 y 页)\n"
+"* pages={x,y,z} (第 x, y, z 页)\n"
+"* pages=- (全部页面)\n"
+"* pages=last-1 (全部页面，倒序)\n"
+"使用 noautoscale 选项以按原尺寸插入 PDF 页面。\n"
+"更多选项及详情请参照 pdfpages 说明文档。\n"
+
+#: lib/xtemplates/raster_image.xtemplate:14
+msgid "RasterImage"
+msgstr "RasterImage"
+
+#: lib/xtemplates/raster_image.xtemplate:17
+#: lib/xtemplates/raster_image.xtemplate:24
+msgid "Raster image"
+msgstr "栅格图像"
+
+#: lib/xtemplates/raster_image.xtemplate:22
+msgid ""
+"A bitmap file.\n"
+"Use this template to include bitmap images of any kind.\n"
+msgstr ""
+"栅格图像文件。\n"
+"使用此模板嵌入任何类型的图像文件。\n"
+
+#: lib/xtemplates/vector_graphics.xtemplate:14
+msgid "VectorGraphics"
+msgstr "VectorGraphics"
+
+#: lib/xtemplates/vector_graphics.xtemplate:15
+#: lib/xtemplates/vector_graphics.xtemplate:24
+msgid "Vector graphics"
+msgstr "矢量图形"
+
+#: lib/xtemplates/vector_graphics.xtemplate:17
+msgid ""
+"A vector graphics file.\n"
+"Use this template to include vector graphics of any kind.\n"
+"LyX will try to retain the vector properties of the image for\n"
+"the final output.\n"
+"Note that specialized templates exist for Xfig figures and Dia diagrams.\n"
+"The specialized templates allow to automatically use the document font in\n"
+"the figures, which is not possible with this general template.\n"
+msgstr ""
+"矢量图形文件。\n"
+"使用此模板插入任意矢量文件。\n"
+"LyX 会尝试在最终输出时尽量保存该图形的矢量属性。\n"
+"注意 Xfig 图形和 Dia 图需使用对应的模板而不是本模板。\n"
+"那些模板会自动在图中使用文档字体，而该模板不能。\n"
+
+#: lib/xtemplates/xfig.xtemplate:33
+msgid "XFig"
+msgstr "XFig"
+
+#: lib/xtemplates/xfig.xtemplate:34 lib/xtemplates/xfig.xtemplate:37
+msgid "Xfig figure"
+msgstr "Xfig 图"
+
+#: lib/xtemplates/xfig.xtemplate:36
+msgid "An Xfig figure.\n"
+msgstr "Xfig 图。\n"
+
+#: lib/configure.py:726
+msgid "tgo"
+msgstr "tgo"
+
+#: lib/configure.py:726
+msgid "tgo|Tgif"
+msgstr "tgo|Tgif"
+
+#: lib/configure.py:729
+msgid "FIG"
+msgstr "FIG"
+
+#: lib/configure.py:732
+msgid "DIA"
+msgstr "DIA"
+
+#: lib/configure.py:735
+msgid "sxd"
+msgstr "sxd"
+
+#: lib/configure.py:735
+msgid "sxd|OpenDocument"
+msgstr "sxd|OpenDocument"
+
+#: lib/configure.py:738
+msgid "Grace"
+msgstr "Grace"
+
+#: lib/configure.py:741
+msgid "FEN"
+msgstr "FEN"
+
+#: lib/configure.py:744
+msgid "SVG"
+msgstr "SVG"
+
+#: lib/configure.py:745
+msgid "SVG (compressed)"
+msgstr "SVG (压缩)"
+
+#: lib/configure.py:748
+msgid "BMP"
+msgstr "BMP"
+
+#: lib/configure.py:749
+msgid "GIF"
+msgstr "GIF"
+
+#: lib/configure.py:750
+msgid "jpeg"
+msgstr "jpeg"
+
+#: lib/configure.py:750
+msgid "jpeg|JPEG"
+msgstr "jpeg|JPEG"
+
+#: lib/configure.py:751
+msgid "PBM"
+msgstr "PBM"
+
+#: lib/configure.py:752
+msgid "PGM"
+msgstr "PGM"
+
+#: lib/configure.py:753 src/frontends/qt/GuiClipboard.cpp:181
+msgid "PNG"
+msgstr "PNG"
+
+#: lib/configure.py:754
+msgid "PPM"
+msgstr "PNG"
+
+#: lib/configure.py:755
+msgid "TIFF"
+msgstr "TIFF"
+
+#: lib/configure.py:756
+msgid "XBM"
+msgstr "XBM"
+
+#: lib/configure.py:757
+msgid "XPM"
+msgstr "XPM"
+
+#: lib/configure.py:768
+msgid "Plain text (chess output)"
+msgstr "纯文本 (chess output)"
+
+#: lib/configure.py:769
+#, fuzzy
+msgid "DocBook 5"
+msgstr "DocBook"
+
+#: lib/configure.py:770
+msgid "Graphviz Dot"
+msgstr "Graphviz Dot 图形"
+
+#: lib/configure.py:771
+msgid "LaTeX (dviluatex)"
+msgstr "LaTeX (dviluatex)"
+
+#: lib/configure.py:772
+msgid "ePub"
+msgstr ""
+
+#: lib/configure.py:773
+msgid "LaTeX (pLaTeX)"
+msgstr "LaTeX (pLaTeX)"
+
+#: lib/configure.py:774
+msgid "NoWeb"
+msgstr "NoWeb"
+
+#: lib/configure.py:774
+msgid "NoWeb|N"
+msgstr "NoWeb|N"
+
+#: lib/configure.py:776
+msgid "Sweave (Japanese)"
+msgstr "Sweave (日文)"
+
+#: lib/configure.py:776
+msgid "Sweave (Japanese)|S"
+msgstr "Sweave (日文)|S"
+
+#: lib/configure.py:777
+msgid "R/S code"
+msgstr "R/S 代码"
+
+#: lib/configure.py:779
+msgid "Rnw (knitr, Japanese)"
+msgstr "Rnw (knitr, 日文)"
+
+#: lib/configure.py:780
+msgid "LilyPond book (LaTeX)"
+msgstr "LilyPond 书刊 (LaTeX)"
+
+#: lib/configure.py:781
+msgid "LilyPond book (pLaTeX)"
+msgstr "LilyPond 书刊 (pLaTeX)"
+
+#: lib/configure.py:782
+msgid "LaTeX (plain)"
+msgstr "LaTeX (原版)"
+
+#: lib/configure.py:782
+msgid "LaTeX (plain)|L"
+msgstr "LaTeX (原版)|L"
+
+#: lib/configure.py:783
+msgid "LaTeX (LuaTeX)"
+msgstr "LaTeX (LuaTeX)"
+
+#: lib/configure.py:784
+msgid "LaTeX (pdflatex)"
+msgstr "LaTeX (pdflatex)"
+
+#: lib/configure.py:785
+msgid "LaTeX (XeTeX)"
+msgstr "LaTeX (XeTeX)"
+
+#: lib/configure.py:786
+msgid "LaTeX (clipboard)"
+msgstr "LaTeX (剪贴板)"
+
+#: lib/configure.py:787
+msgid "Plain text"
+msgstr "纯文本"
+
+#: lib/configure.py:787
+msgid "Plain text|a"
+msgstr "纯文本"
+
+#: lib/configure.py:788
+msgid "Plain text (pstotext)"
+msgstr "纯文本(pstotext)"
+
+#: lib/configure.py:789
+msgid "Plain text (ps2ascii)"
+msgstr "纯文本(ps2ascii)"
+
+#: lib/configure.py:790
+msgid "Plain text (catdvi)"
+msgstr "纯文本(catdvi)"
+
+#: lib/configure.py:791
+msgid "Plain Text, Join Lines"
+msgstr "单行纯文本"
+
+#: lib/configure.py:792
+msgid "Info (Beamer)"
+msgstr "Info (Beamer)"
+
+#: lib/configure.py:796
+msgid "LilyPond music"
+msgstr "LilyPond 音乐"
+
+#: lib/configure.py:799
+msgid "Gnumeric spreadsheet"
+msgstr "Gnumeric 表格"
+
+#: lib/configure.py:800
+msgid "Excel spreadsheet"
+msgstr "Excel 表格"
+
+#: lib/configure.py:801
+msgid "MS Excel Office Open XML"
+msgstr "MS Excel Office Open XML"
+
+#: lib/configure.py:802
+#, fuzzy
+msgid "XHTML Table (for spreadsheets)"
+msgstr "HTML 表格 (for spreadsheets)"
+
+#: lib/configure.py:803
+msgid "HTML Table (for spreadsheets)"
+msgstr "HTML 表格 (for spreadsheets)"
+
+#: lib/configure.py:804
+msgid "OpenDocument spreadsheet"
+msgstr "OpenDocument 表格"
+
+#: lib/configure.py:807
+msgid "LyXHTML"
+msgstr "LyXHTML"
+
+#: lib/configure.py:807
+msgid "LyXHTML|y"
+msgstr "LyXHTML|y"
+
+#: lib/configure.py:813 src/frontends/qt/GuiLog.cpp:248
+#: src/insets/InsetBibtex.cpp:148
+msgid "BibTeX"
+msgstr "BibTeX"
+
+#: lib/configure.py:821
+msgid "EPS"
+msgstr "EPS"
+
+#: lib/configure.py:822
+msgid "EPS (uncropped)"
+msgstr "EPS (未裁剪)"
+
+#: lib/configure.py:823 lib/examples/Articles:0
+msgid "EPS (cropped)"
+msgstr "EPS (已裁剪)"
+
+#: lib/configure.py:824
+msgid "Postscript"
+msgstr "Postscript"
+
+#: lib/configure.py:824
+msgid "Postscript|t"
+msgstr "Postscript|t"
+
+#: lib/configure.py:833
+msgid "PDF (ps2pdf)"
+msgstr "PDF (ps2pdf)"
+
+#: lib/configure.py:833
+msgid "PDF (ps2pdf)|P"
+msgstr "PDF (ps2pdf)|P"
+
+#: lib/configure.py:834
+msgid "PDF (pdflatex)"
+msgstr "PDF (pdflatex)"
+
+#: lib/configure.py:834
+msgid "PDF (pdflatex)|F"
+msgstr "PDF (pdflatex)|F"
+
+#: lib/configure.py:835
+msgid "PDF (dvipdfm)"
+msgstr "PDF (dvipdfm)"
+
+#: lib/configure.py:835
+msgid "PDF (dvipdfm)|m"
+msgstr "PDF (dvipdfm)|m"
+
+#: lib/configure.py:836
+msgid "PDF (XeTeX)"
+msgstr "PDF (XeTeX)"
+
+#: lib/configure.py:836
+msgid "PDF (XeTeX)|X"
+msgstr "PDF (XeTeX)|X"
+
+#: lib/configure.py:837
+msgid "PDF (LuaTeX)"
+msgstr "PDF (LuaTeX)"
+
+#: lib/configure.py:837
+msgid "PDF (LuaTeX)|u"
+msgstr "PDF (LuaTeX)|u"
+
+#: lib/configure.py:838
+msgid "PDF (graphics)"
+msgstr "PDF (图形)"
+
+#: lib/configure.py:839 lib/examples/Articles:0
+msgid "PDF (cropped)"
+msgstr "PDF (已裁剪)"
+
+#: lib/configure.py:840
+msgid "PDF (lower resolution)"
+msgstr "PDF (低分辨率)"
+
+#: lib/configure.py:841
+#, fuzzy
+msgid "PDF (DocBook)"
+msgstr "书刊 (DocBook)"
+
+#: lib/configure.py:846
+msgid "DVI"
+msgstr "DVI"
+
+#: lib/configure.py:846
+msgid "DVI|D"
+msgstr "DVI|D"
+
+#: lib/configure.py:847
+msgid "DVI (LuaTeX)"
+msgstr "DVI (LuaTeX)"
+
+#: lib/configure.py:847
+msgid "DVI (LuaTeX)|V"
+msgstr "DVI (LuaTeX)|V"
+
+#: lib/configure.py:850
+msgid "DraftDVI"
+msgstr "DraftDVI"
+
+#: lib/configure.py:853 lib/configure.py:890
+msgid "htm"
+msgstr "htm"
+
+#: lib/configure.py:853 lib/configure.py:890
+msgid "htm|HTML"
+msgstr "htm|HTML"
+
+#: lib/configure.py:856
+msgid "Noteedit"
+msgstr "Noteedit"
+
+#: lib/configure.py:859
+msgid "OpenDocument (tex4ht)"
+msgstr "OpenDocument (tex4ht)"
+
+#: lib/configure.py:860
+msgid "OpenDocument (eLyXer)"
+msgstr "OpenDocument (eLyXer)"
+
+#: lib/configure.py:861
+msgid "OpenDocument (Pandoc)"
+msgstr "OpenDocument (Pandoc)"
+
+#: lib/configure.py:862
+msgid "OpenOffice.Org (sxw)"
+msgstr "OpenOffice.Org (sxw)"
+
+#: lib/configure.py:865
+msgid "Rich Text Format"
+msgstr "富文本格式 (RTF)"
+
+#: lib/configure.py:866
+msgid "MS Word"
+msgstr "MS Word"
+
+#: lib/configure.py:866
+msgid "MS Word|W"
+msgstr "MS Word|W"
+
+#: lib/configure.py:867
+msgid "MS Word Office Open XML"
+msgstr "MS Word Office Open XML"
+
+#: lib/configure.py:867
+msgid "MS Word Office Open XML|O"
+msgstr "MS Word Office Open XML|O"
+
+#: lib/configure.py:870
+msgid "Table (CSV)"
+msgstr "表格 (CSV)"
+
+#: lib/configure.py:872 src/frontends/qt/GuiView.cpp:1805
+#: src/mathed/InsetMathMacroTemplate.cpp:538
+msgid "LyX"
+msgstr "LyX"
+
+#: lib/configure.py:873
+msgid "LyX 1.3.x"
+msgstr "LyX 1.3.x"
+
+#: lib/configure.py:874
+msgid "LyX 1.4.x"
+msgstr "LyX 1.4.x"
+
+#: lib/configure.py:875
+msgid "LyX 1.5.x"
+msgstr "LyX 1.5.x"
+
+#: lib/configure.py:876
+msgid "LyX 1.6.x"
+msgstr "LyX 1.6.x"
+
+#: lib/configure.py:877
+msgid "LyX 2.0.x"
+msgstr "LyX 2.0.x"
+
+#: lib/configure.py:878
+msgid "LyX 2.1.x"
+msgstr "LyX 2.1.x"
+
+#: lib/configure.py:879
+msgid "LyX 2.2.x"
+msgstr "LyX 2.2.x"
+
+#: lib/configure.py:880
+#, fuzzy
+msgid "LyX 2.3.x"
+msgstr "LyX 2.0.x"
+
+#: lib/configure.py:881
+msgid "CJK LyX 1.4.x (big5)"
+msgstr "CJK LyX 1.4.x (big5)"
+
+#: lib/configure.py:882
+msgid "CJK LyX 1.4.x (euc-jp)"
+msgstr "CJK LyX 1.4.x (euc-jp)"
+
+#: lib/configure.py:883
+msgid "CJK LyX 1.4.x (euc-kr)"
+msgstr "CJK LyX 1.4.x (euc-kr)"
+
+#: lib/configure.py:884
+msgid "LyX Preview"
+msgstr "LyX 预览"
+
+#: lib/configure.py:885
+msgid "pdf_tex"
+msgstr "pdf_tex"
+
+#: lib/configure.py:885
+msgid "pdf_tex|PDFTEX"
+msgstr "pdf_tex|PDFTEX"
+
+#: lib/configure.py:886
+msgid "Program"
+msgstr "程序"
+
+#: lib/configure.py:887
+msgid "ps_tex"
+msgstr "ps_tex"
+
+#: lib/configure.py:887
+msgid "ps_tex|PSTEX"
+msgstr "ps_tex|PSTEX"
+
+#: lib/configure.py:888 src/frontends/qt/GuiClipboard.cpp:178
+msgid "Windows Metafile"
+msgstr "Windows Metafile"
+
+#: lib/configure.py:889 src/frontends/qt/GuiClipboard.cpp:177
+msgid "Enhanced Metafile"
+msgstr "Enhanced Metafile"
+
+#: lib/configure.py:1009
+msgid "LyXBlogger"
+msgstr "LyXBlogger"
+
+#: lib/configure.py:1291
+msgid "gnuplot"
+msgstr "gnuplot"
+
+#: lib/configure.py:1291
+msgid "gnuplot|Gnuplot"
+msgstr "gnuplot|Gnuplot"
+
+#: lib/configure.py:1398
+msgid "LyX Archive (zip)"
+msgstr "LyX 压缩文档 (zip)"
+
+#: lib/configure.py:1401
+msgid "LyX Archive (tar.gz)"
+msgstr "LyX 压缩文档 (tar.gz)"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Game 1"
+msgstr "游戏"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Game 2"
+msgstr "游戏"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Example (LyXified)"
+msgstr "示例文件(&E):"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Example (raw)"
+msgstr "例"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Gnuplot"
+msgstr "gnuplot"
+
+#: lib/examples/Articles:0 src/TocBackend.cpp:302
+#: src/frontends/qt/GuiExternal.cpp:86
+msgid "External Material"
+msgstr "外部材料"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Itemize Bullets"
+msgstr "项目列表"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Minted File Listing"
+msgstr "行内程序列表(&I)"
+
+#: lib/examples/Articles:0
+msgid "XY-Pic"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Feynman Diagrams"
+msgstr "Feynman 图|F"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "XY-Figure"
+msgstr "图"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Minted Listings"
+msgstr "程序列表的列表"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Instant Preview"
+msgstr "即时预览(&P):"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Graphics and Insets"
+msgstr "图形驱动程序(&G):"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Localization Test (for Developers)"
+msgstr "位置"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Mixing Japanese with other Languages (with CJKutf8)"
+msgstr "多语言标题(C)|C"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Writing Armenian"
+msgstr "亚美尼亚语"
+
+#: lib/examples/Articles:0
+msgid "Mixing Japanese with other Languages (with platex)"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Language Support"
+msgstr "从右至左语言支持(如阿拉伯语)"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Serial Letter 1"
+msgstr "希伯来语信件"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Serial Letter 2"
+msgstr "希伯来语信件"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Serial Letter 3"
+msgstr "希伯来语信件"
+
+#: lib/examples/Articles:0
+msgid "LilyPond Book"
+msgstr "LilyPond 书刊"
+
+#: lib/examples/Articles:0
+msgid "Multilingual Captions"
+msgstr "多语言标题"
+
+#: lib/examples/Articles:0
+msgid "Hazard and Precautionary Statements"
+msgstr "危害与预警警示语"
+
+#: lib/examples/Articles:0
+msgid "Noweb Listerrors"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Noweb2LyX"
+msgstr "Noweb"
+
+#: lib/examples/Articles:0 src/frontends/qt/GuiDocument.cpp:1825
+msgid "Modules"
+msgstr "模块"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Foils Landslide"
+msgstr "横向幻灯片"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Foils"
+msgstr "FoilTeX"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Beamer (Complex)"
+msgstr "Beamer 注释"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Welcome"
+msgstr "欢迎使用 LyX!"
+
+#: lib/examples/Articles:0
+msgid "Writing Korean with CJK-ko"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Mathematical Monthly"
+msgstr "美国数学协会 (AMS) 文章"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "IEEE Transactions Journal"
+msgstr "IEEE 期刊"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "IEEE Transactions Conference"
+msgstr "IEEE Transactions Computer Society"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Springers Global Journal Template (V. 3)"
+msgstr "Springer's Global Journal 模板 (第 3 版)"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Hebrew Article (KOMA-Script)"
+msgstr "Beamer 文档 (KOMA-Script)"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "02 Foreword"
+msgstr "前言"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "07 Part"
+msgstr "部"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "10 Glossary"
+msgstr "关闭"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "04 Acknowledgements"
+msgstr "致谢"
+
+#: lib/examples/Articles:0
+msgid "06 Acronym"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "08 Author"
+msgstr "作者"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "09 Appendix"
+msgstr "附录"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "11 References"
+msgstr "引用"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "05 Contributor List"
+msgstr "贡献者列表"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "01 Dedication"
+msgstr "献辞"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "00 Main File"
+msgstr "文件丢失"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "03 Preface"
+msgstr "序言"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "10 Solutions"
+msgstr "解答"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "06 Part"
+msgstr "部"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "07 Chapter"
+msgstr "章"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "08 Appendix"
+msgstr "附录"
+
+#: lib/examples/Articles:0
+msgid "05 Acronym"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "09 Glossary"
+msgstr "关闭"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Simple"
+msgstr "简单简历"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Colored"
+msgstr "颜色"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Chapter 1"
+msgstr "章"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Chapter 2"
+msgstr "章"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Main File"
+msgstr "文件丢失"
+
+#: lib/examples/Articles:0
+msgid "PhD Thesis"
+msgstr ""
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Theses"
+msgstr "辞典"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Japanese Report (Standard Class for LuaTeX%2C vertical Writing)"
+msgstr "日文书刊 (标准类竖排)"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Japanese Book (Standard Class for LuaTeX%2C vertical Writing)"
+msgstr "日文书刊 (标准类竖排)"
+
+#: lib/examples/Articles:0
+#, fuzzy
+msgid "Japanese Article (Standard Class for LuaTeX%2C vertical Writing)"
+msgstr "日文文档 (标准类竖排)"
+
+#: lib/tabletemplates/Formal_with_Footline.lyx:0
+#, fuzzy
+msgid "Formal with Footline"
+msgstr "数学公式线条"
+
+#: lib/tabletemplates/Formal_with_Footline.lyx:0
+#, fuzzy
+msgid "Formal without Footline"
+msgstr "无照片简历"
+
+#: lib/tabletemplates/Formal_with_Footline.lyx:0
+msgid "Grid with Head"
+msgstr ""
+
+#: lib/tabletemplates/Formal_with_Footline.lyx:0
+#, fuzzy
+msgid "No Borders"
+msgstr "边框(&B)"
+
+#: lib/tabletemplates/Formal_with_Footline.lyx:0
+#, fuzzy
+msgid "Simple Grid"
+msgstr "简单简历"
+
+#: src/Author.cpp:56
+#, c-format
+msgid "%1$s[[name]] (%2$s[[email]])"
+msgstr "%1$s[[name]] (%2$s[[email]])"
+
+#: src/BiblioInfo.cpp:917 src/BiblioInfo.cpp:967 src/BiblioInfo.cpp:978
+#: src/BiblioInfo.cpp:1033 src/BiblioInfo.cpp:1037
+msgid "ERROR!"
+msgstr "错误！"
+
+#: src/BiblioInfo.cpp:1441
+msgid "No year"
+msgstr "未知年份"
+
+#: src/BiblioInfo.cpp:1451
+msgid "Bibliography entry not found!"
+msgstr "找不到参考书目项！"
+
+#: src/Buffer.cpp:447
+msgid "Disk Error: "
+msgstr "磁盘错误: "
+
+#: src/Buffer.cpp:448
+#, c-format
+msgid ""
+"LyX could not create the temporary directory '%1$s' (Disk is full maybe?)"
+msgstr "LyX 无法创建临时目录“%1$s” (可能是磁盘已满)"
+
+#: src/Buffer.cpp:577
+msgid "LyX attempted to close a document that had unsaved changes!\n"
+msgstr "LyX 试图关闭未保存的文档！\n"
+
+#: src/Buffer.cpp:581 src/Buffer.cpp:1691
+msgid "Save failed! Document is lost."
+msgstr "保存文件失败! 文档丢失."
+
+#: src/Buffer.cpp:583
+msgid "Attempting to close changed document!"
+msgstr "LyX: 试图关闭修改后的文档！"
+
+#: src/Buffer.cpp:592
+#, c-format
+msgid "Could not remove the temporary directory %1$s"
+msgstr "无法删除临时目录 %1$s"
+
+#: src/Buffer.cpp:1006 src/Text.cpp:616
+#, c-format
+msgid "Unknown token: %1$s %2$s\n"
+msgstr "未知关键词: %1$s %2$s\n"
+
+#: src/Buffer.cpp:1010 src/Buffer.cpp:1016 src/Buffer.cpp:1040
+msgid "Document header error"
+msgstr "文档头出错"
+
+#: src/Buffer.cpp:1015
+msgid "\\begin_header is missing"
+msgstr "\\begin_header 缺失"
+
+#: src/Buffer.cpp:1039
+msgid "\\begin_document is missing"
+msgstr "\\begin_document 缺失"
+
+#: src/Buffer.cpp:1050 src/Buffer.cpp:3104
+msgid "Changes not shown in LaTeX output"
+msgstr "改变项没有输出至 LaTeX 输出"
+
+#: src/Buffer.cpp:1051 src/Buffer.cpp:3105
+#, fuzzy
+msgid ""
+"Changes will not be highlighted in LaTeX output, because xcolor and ulem are "
+"not installed.\n"
+"Please install both packages or redefine \\lyxadded and \\lyxdeleted in the "
+"LaTeX preamble."
+msgstr ""
+"使用 pdflatex 时，修改将不会在 LaTeX 输出中高亮显示，因为 xcolor 和 soul 没有"
+"安装。\n"
+"请安装这些包，或在 LaTeX 导言区重新定义 \\lyxadded 和 \\lyxdeleted。"
+
+#: src/Buffer.cpp:1093 src/BufferParams.cpp:479 src/frontends/qt/GuiLog.cpp:252
+#: src/insets/InsetIndex.cpp:1279
+msgid "Index"
+msgstr "索引"
+
+#: src/Buffer.cpp:1217
+msgid "File Not Found"
+msgstr "文件未找到"
+
+#: src/Buffer.cpp:1218
+#, c-format
+msgid "Unable to open file `%1$s'."
+msgstr "无法打开文件 %1$s。"
+
+#: src/Buffer.cpp:1246 src/Buffer.cpp:1320
+msgid "Document format failure"
+msgstr "文档格式错误"
+
+#: src/Buffer.cpp:1247
+#, c-format
+msgid "%1$s ended unexpectedly, which means that it is probably corrupted."
+msgstr "%1$s 非正常结束，它可能是无效的。"
+
+#: src/Buffer.cpp:1321
+#, c-format
+msgid "%1$s is not a readable LyX document."
+msgstr "%1$s 不是可读取的 LyX 文档。"
+
+#: src/Buffer.cpp:1348
+msgid "Conversion failed"
+msgstr "转换出错"
+
+#: src/Buffer.cpp:1349
+#, c-format
+msgid ""
+"%1$s is from a different version of LyX, but a temporary file for converting "
+"it could not be created."
+msgstr "%1$s 来自其他版本的 LyX，但无法创建转换版本用的临时文件。"
+
+#: src/Buffer.cpp:1359
+msgid "Conversion script not found"
+msgstr "未找到转换脚本"
+
+#: src/Buffer.cpp:1360
+#, c-format
+msgid ""
+"%1$s is from a different version of LyX, but the conversion script lyx2lyx "
+"could not be found."
+msgstr "%1$s 来自其他版本的 LyX，但转换脚本 lyx2lyx 无法找到。"
+
+#: src/Buffer.cpp:1383 src/Buffer.cpp:1390
+msgid "Conversion script failed"
+msgstr "转换脚本执行出错"
+
+#: src/Buffer.cpp:1384
+#, c-format
+msgid ""
+"%1$s is from an older version of LyX and the lyx2lyx script failed to "
+"convert it."
+msgstr "%1$s 来自较老版本的 LyX,，但 lyx2lyx 脚本无法转换。"
+
+#: src/Buffer.cpp:1391
+#, c-format
+msgid ""
+"%1$s is from a newer version of LyX and the lyx2lyx script failed to convert "
+"it."
+msgstr "%1$s 来自较新版本的 LyX,，但 lyx2lyx 脚本无法转换。"
+
+#: src/Buffer.cpp:1470 src/Buffer.cpp:4805 src/Buffer.cpp:4914
+msgid "File is read-only"
+msgstr "文件只读"
+
+#: src/Buffer.cpp:1471
+#, c-format
+msgid "The file %1$s cannot be written because it is marked as read-only."
+msgstr "文件 %1$s 是只读的，不能写入。"
+
+#: src/Buffer.cpp:1480
+#, c-format
+msgid ""
+"Document %1$s has been externally modified. Are you sure you want to "
+"overwrite this file?"
+msgstr "文件 %1$s 已被其它程序修改，您要覆盖它吗？"
+
+#: src/Buffer.cpp:1482
+msgid "Overwrite modified file?"
+msgstr "覆盖已修改的文件？"
+
+#: src/Buffer.cpp:1483 src/Exporter.cpp:50
+#: src/frontends/qt/GuiClipboard.cpp:252 src/frontends/qt/GuiView.cpp:3071
+#: src/frontends/qt/GuiView.cpp:3338 src/frontends/qt/GuiView.cpp:3443
+msgid "&Overwrite"
+msgstr "覆盖(&O)"
+
+#: src/Buffer.cpp:1548
+msgid "Backup failure"
+msgstr "备份失败"
+
+#: src/Buffer.cpp:1549
+#, c-format
+msgid ""
+"Cannot create backup file %1$s.\n"
+"Please check whether the directory exists and is writable."
+msgstr ""
+"不能创建备份文件 %1$s.\n"
+"请确定目录存在且可以写入。"
+
+#: src/Buffer.cpp:1584 src/Buffer.cpp:1595
+msgid "Write failure"
+msgstr "写入失败"
+
+#: src/Buffer.cpp:1585
+#, c-format
+msgid ""
+"The file has successfully been saved as:\n"
+" %1$s.\n"
+"But LyX could not move it to:\n"
+" %2$s.\n"
+"Your original file has been backed up to:\n"
+" %3$s"
+msgstr ""
+"文件已保存为:\n"
+" %1$s\n"
+"但 LyX 不能将它移动到:\n"
+" %2$s\n"
+"您的原始文件已备份到:\n"
+" %3$s"
+
+#: src/Buffer.cpp:1596
+#, c-format
+msgid ""
+"Cannot move saved file to:\n"
+" %1$s.\n"
+"But the file has successfully been saved as:\n"
+" %2$s."
+msgstr ""
+"不能将已保存的文件移动到:\n"
+" %1$s\n"
+"但该文件已保存为:\n"
+" %2$s"
+
+#: src/Buffer.cpp:1612
+#, c-format
+msgid "Saving document %1$s..."
+msgstr "正在保存文件 %1$s..."
+
+#: src/Buffer.cpp:1627
+msgid " could not write file!"
+msgstr " 文件无法写入！"
+
+#: src/Buffer.cpp:1635
+msgid " done."
+msgstr " 完成。"
+
+#: src/Buffer.cpp:1650
+#, c-format
+msgid "LyX: Attempting to save document %1$s\n"
+msgstr "LyX: 试图保存文档 %1$s\n"
+
+#: src/Buffer.cpp:1660 src/Buffer.cpp:1673 src/Buffer.cpp:1687
+#, c-format
+msgid "Saved to %1$s. Phew.\n"
+msgstr "成功保存文档到 %1$s。呼……\n"
+
+#: src/Buffer.cpp:1663
+msgid "Save failed! Trying again...\n"
+msgstr "保存失败！重试...\n"
+
+#: src/Buffer.cpp:1677
+msgid "Save failed! Trying yet again...\n"
+msgstr "保存失败! 再次重试...\n"
+
+#: src/Buffer.cpp:1773
+msgid "Iconv software exception Detected"
+msgstr "发现 Iconv 异常"
+
+#: src/Buffer.cpp:1774
+#, c-format
+msgid ""
+"Please verify that the `iconv' support software is properly installed and "
+"supports the selected encoding (%1$s), or change the encoding in "
+"Document>Settings>Language."
+msgstr ""
+
+#: src/Buffer.cpp:1806
+#, fuzzy, c-format
+msgid "Uncodable character '%1$s' (code point %2$s)"
+msgstr "无法找到适合的 LaTeX 命令处理字符 '%1$s' (code point %2$s)。"
+
+#: src/Buffer.cpp:1809
+#, fuzzy
+msgid ""
+"Some characters of your document are not representable in specific verbatim "
+"contexts.\n"
+"Changing the document encoding to utf8 could help."
+msgstr ""
+"部分字符可能无法用所选编码表示。\n"
+"您可以尝试把文档编码转为 utf8。"
+
+#: src/Buffer.cpp:1814
+#, c-format
+msgid "Could not find LaTeX command for character '%1$s' (code point %2$s)"
+msgstr "无法找到适合的 LaTeX 命令处理字符 '%1$s' (code point %2$s)。"
+
+#: src/Buffer.cpp:1817
+msgid ""
+"Some characters of your document are probably not representable in the "
+"chosen encoding.\n"
+"Changing the document encoding to utf8 could help."
+msgstr ""
+"部分字符可能无法用所选编码表示。\n"
+"您可以尝试把文档编码转为 utf8。"
+
+#: src/Buffer.cpp:1825
+msgid "iconv conversion failed"
+msgstr "iconv 转换出错"
+
+#: src/Buffer.cpp:1830
+msgid "conversion failed"
+msgstr "转换出错"
+
+#: src/Buffer.cpp:1942 src/insets/InsetGraphics.cpp:923
+msgid "Uncodable character in file path"
+msgstr "文件路径中存在非法字符"
+
+#: src/Buffer.cpp:1944
+#, c-format
+msgid ""
+"The path of your document\n"
+"(%1$s)\n"
+"contains glyphs that are unknown in the current document encoding (namely "
+"%2$s). This may result in incomplete output, unless TEXINPUTS contains the "
+"document directory and you don't use explicitly relative paths (i.e., paths "
+"starting with './' or '../') in the preamble or in ERT.\n"
+"\n"
+"In case of problems, choose an appropriate document encoding\n"
+"(such as utf8) or change the file path name."
+msgstr ""
+"您的文档路径\n"
+"(%1$s)\n"
+"中，包含当前文档编码 (即 %2$s) 中不存在的字符。这可能会导致输出结果不完整，除"
+"非 TEXINPUTS 包含该文档目录，且您不会在导言区或 ERT 显式使用相对路径 (如以 "
+"“./” 或 “../” 开头的路径)。\n"
+"\n"
+"请选择合适的编码 (如 utf8) 或更改文件路径。"
+
+#: src/Buffer.cpp:2035
+#, c-format
+msgid "The languages %1$s are only supported by Babel."
+msgstr "“%1$s”只有 Babel 支持。"
+
+#: src/Buffer.cpp:2036
+#, c-format
+msgid "The language %1$s is only supported by Babel."
+msgstr "“%1$s”只有 Babel 支持。"
+
+#: src/Buffer.cpp:2046
+#, c-format
+msgid "The languages %1$s are only supported by Polyglossia."
+msgstr "“%1$s”只有 Polyglossia 支持。"
+
+#: src/Buffer.cpp:2047
+#, c-format
+msgid "The language %1$s is only supported by Polyglossia."
+msgstr "“%1$s”只有 Polyglossia 支持。"
+
+#: src/Buffer.cpp:2053
+msgid "Incompatible Languages!"
+msgstr "语言不兼容！"
+
+#: src/Buffer.cpp:2055
+#, c-format
+msgid ""
+"You cannot use the following languages together in one LaTeX document "
+"because they require conflicting language packages:\n"
+"%1$s%2$s"
+msgstr ""
+"您不能在一个 LaTeX 文档中使用下列发生冲突的语言包:\n"
+"%1$s%2$s"
+
+#: src/Buffer.cpp:2367
+msgid "Running chktex..."
+msgstr "执行 chktex..."
+
+#: src/Buffer.cpp:2386
+msgid "chktex failure"
+msgstr "chktex 执行出错"
+
+#: src/Buffer.cpp:2387
+msgid "Could not run chktex successfully."
+msgstr "无法正确执行 chktex。"
+
+#: src/Buffer.cpp:2782
+#, c-format
+msgid "Don't know how to export to format: %1$s"
+msgstr "不知道如何导出此格式: %1$s"
+
+#: src/Buffer.cpp:2861
+msgid "Branch state changes in master document"
+msgstr "主文档分支状态改变"
+
+#: src/Buffer.cpp:2862
+#, c-format
+msgid ""
+"The state of the branch '%1$s' was changed in the master file. Please make "
+"sure to save the master."
+msgstr "分支“%1$s”的状态在主文件里已修改。请务必保存主文档。"
+
+#: src/Buffer.cpp:2931
+#, c-format
+msgid "Error exporting to format: %1$s."
+msgstr "导出此格式错误: %1$s."
+
+#: src/Buffer.cpp:2940
+msgid "Error generating literate programming code."
+msgstr "不能生成文字化编程码。"
+
+#: src/Buffer.cpp:3029
+#, c-format
+msgid "Branch \"%1$s\" already exists."
+msgstr "分支“%1$s”已存在。"
+
+#: src/Buffer.cpp:3086
+msgid "Error viewing the output file."
+msgstr "查看输出文件出错。"
+
+#: src/Buffer.cpp:3448 src/frontends/qt/GuiView.cpp:2888
+#: src/frontends/qt/Validator.cpp:247 src/insets/ExternalSupport.cpp:394
+#: src/insets/InsetGraphics.cpp:697 src/insets/InsetInclude.cpp:616
+msgid "Invalid filename"
+msgstr "无效文件名"
+
+#: src/Buffer.cpp:3449 src/insets/ExternalSupport.cpp:395
+#: src/insets/InsetGraphics.cpp:698 src/insets/InsetInclude.cpp:617
+msgid ""
+"The following filename will cause troubles when running the exported file "
+"through LaTeX: "
+msgstr "以下文件名可能导致导出 LaTeX 时错误: "
+
+#: src/Buffer.cpp:3454 src/insets/ExternalSupport.cpp:400
+#: src/insets/InsetGraphics.cpp:705 src/insets/InsetInclude.cpp:621
+msgid "Problematic filename for DVI"
+msgstr "对 DVI 而言有问题的文件名"
+
+#: src/Buffer.cpp:3455 src/insets/ExternalSupport.cpp:401
+#: src/insets/InsetGraphics.cpp:706 src/insets/InsetInclude.cpp:622
+msgid ""
+"The following filename can cause troubles when running the exported file "
+"through LaTeX and opening the resulting DVI: "
+msgstr "以下文件名可能导致导出 LaTeX 并打开 DVI 文件时错误: "
+
+#: src/Buffer.cpp:3494 src/insets/InsetBibtex.cpp:353
+msgid "Export Warning!"
+msgstr "导出警告!"
+
+#: src/Buffer.cpp:3495
+msgid ""
+"There are spaces in the paths to your BibTeX databases.\n"
+"BibTeX will be unable to find them."
+msgstr ""
+"您的 BibTeX 数据库文件名中有空格.\n"
+"BibTeX 将不能找到此文件."
+
+#: src/Buffer.cpp:4166
+#, c-format
+msgid "Preview source code for paragraph %1$d"
+msgstr "预览段落 %1$d 的源代码"
+
+#: src/Buffer.cpp:4171
+#, c-format
+msgid "Preview source code from paragraph %1$s to %2$s"
+msgstr "预览段落 %1$s 至 %2$s 段落之源代码"
+
+#: src/Buffer.cpp:4227
+msgid "Preview source code"
+msgstr "预览源文件"
+
+#: src/Buffer.cpp:4229
+msgid "Preview preamble"
+msgstr "预览导言区"
+
+#: src/Buffer.cpp:4231
+msgid "Preview body"
+msgstr "预览正文"
+
+#: src/Buffer.cpp:4247
+msgid "Plain text does not have a preamble."
+msgstr "纯文本没有导言区。"
+
+#: src/Buffer.cpp:4391
+msgid "Autosaving current document..."
+msgstr "自动保存当前文档..."
+
+#: src/Buffer.cpp:4518
+#, c-format
+msgid "No information for exporting the format %1$s."
+msgstr "无导出格式 %1$s 的信息."
+
+#: src/Buffer.cpp:4522
+#, fuzzy, c-format
+msgid "Hint: use non-TeX fonts or set input encoding to '%1$s'"
+msgstr "不同的“使用非 TeX 字体”设置"
+
+#: src/Buffer.cpp:4524
+msgid "Couldn't export file"
+msgstr "无法导出文件"
+
+#: src/Buffer.cpp:4592 src/frontends/qt/GuiView.cpp:3044
+msgid "File name error"
+msgstr "文件名出错"
+
+#: src/Buffer.cpp:4593
+#, c-format
+msgid ""
+"The directory path to the document\n"
+"%1$s\n"
+"contains spaces, but your TeX installation does not allow them. You should "
+"save the file to a directory whose name does not contain spaces."
+msgstr ""
+
+#: src/Buffer.cpp:4682 src/Buffer.cpp:4712 src/frontends/qt/GuiView.cpp:922
+msgid "Document export cancelled."
+msgstr "文档导出已取消。"
+
+#: src/Buffer.cpp:4715
+#, c-format
+msgid "Document exported as %1$s to file `%2$s'"
+msgstr "文档 %1$s 导出为 `%2$s'"
+
+#: src/Buffer.cpp:4722
+#, c-format
+msgid "Document exported as %1$s"
+msgstr "文档导出为 %1$s"
+
+#: src/Buffer.cpp:4791
+#, c-format
+msgid ""
+"An emergency save of the document %1$s exists.\n"
+"\n"
+"Recover emergency save?"
+msgstr ""
+"文档 %1$s 存在一紧急保存版本.\n"
+"\n"
+"使用此紧急版本吧?"
+
+#: src/Buffer.cpp:4794
+msgid "Load emergency save?"
+msgstr "读入紧急保存的版本吗？"
+
+#: src/Buffer.cpp:4795
+msgid "&Recover"
+msgstr "恢复(&R)"
+
+#: src/Buffer.cpp:4795
+msgid "&Load Original"
+msgstr "读取原版本(&L)"
+
+#: src/Buffer.cpp:4795
+#, fuzzy
+msgid "&Only show difference"
+msgstr "差异"
+
+#: src/Buffer.cpp:4806
+#, c-format
+msgid ""
+"An emergency file is successfully loaded, but the original file %1$s is "
+"marked read-only. Please make sure to save the document as a different file."
+msgstr ""
+"已载入紧急备份文件。但原始文件“%1$s”是只读的。请保证将该文件另存为不同的文"
+"件。"
+
+#: src/Buffer.cpp:4813
+msgid "Document was successfully recovered."
+msgstr "文档已被成功修复。"
+
+#: src/Buffer.cpp:4815
+msgid "Document was NOT successfully recovered."
+msgstr "文档 未 被成功修复。"
+
+#: src/Buffer.cpp:4816
+#, c-format
+msgid ""
+"Remove emergency file now?\n"
+"(%1$s)"
+msgstr ""
+"现在删除紧急保存的文件吗？\n"
+"(%1$s)"
+
+#: src/Buffer.cpp:4820 src/Buffer.cpp:4832
+msgid "Delete emergency file?"
+msgstr "删除紧急保存的文件吗？"
+
+#: src/Buffer.cpp:4821 src/Buffer.cpp:4834
+msgid "&Keep"
+msgstr "保留(&K)"
+
+#: src/Buffer.cpp:4825
+msgid "Emergency file deleted"
+msgstr "紧急保存的文件已删除"
+
+#: src/Buffer.cpp:4826
+msgid "Do not forget to save your file now!"
+msgstr "别忘了现在保存你的文件！"
+
+#: src/Buffer.cpp:4833
+msgid "Remove emergency file now?"
+msgstr "现在删除紧急保存的文件吗？"
+
+#: src/Buffer.cpp:4856
+#, fuzzy
+msgid "Can't rename emergency file!"
+msgstr "删除紧急保存的文件吗？"
+
+#: src/Buffer.cpp:4857
+msgid ""
+"LyX was unable to rename the emergency file. You should do so manually. "
+"Otherwise, you will be asked about it again the next time you try to load "
+"this file, and may over-write your own work."
+msgstr ""
+
+#: src/Buffer.cpp:4862
+#, fuzzy
+msgid "Emergency File Renamed"
+msgstr "紧急保存的文件已删除"
+
+#: src/Buffer.cpp:4863
+#, fuzzy, c-format
+msgid ""
+"Emergency file renamed as:\n"
+" %1$s"
+msgstr "紧急保存的文件已删除"
+
+#: src/Buffer.cpp:4902
+#, c-format
+msgid ""
+"The backup of the document %1$s is newer.\n"
+"\n"
+"Load the backup instead?"
+msgstr ""
+"备份的版本比当前文件 %1$s 新.\n"
+"\n"
+"读取备份版本?"
+
+#: src/Buffer.cpp:4904
+msgid "Load backup?"
+msgstr "读取备份版本?"
+
+#: src/Buffer.cpp:4905
+msgid "&Load backup"
+msgstr "读取备份(&L)"
+
+#: src/Buffer.cpp:4905
+msgid "Load &original"
+msgstr "读取原版本(&O)"
+
+#: src/Buffer.cpp:4915
+#, c-format
+msgid ""
+"A backup file is successfully loaded, but the original file %1$s is marked "
+"read-only. Please make sure to save the document as a different file."
+msgstr ""
+"已载入备份文件。但原始文件“%1$s”是只读的。请保证将该文件另存为不同的文件。"
+
+#: src/Buffer.cpp:5301
+msgid "Senseless!!! "
+msgstr "无意义!!! "
+
+#: src/Buffer.cpp:5576
+#, c-format
+msgid "Document %1$s reloaded."
+msgstr "文档 %1$s 已重新载入。"
+
+#: src/Buffer.cpp:5579
+#, c-format
+msgid "Could not reload document %1$s."
+msgstr "无法重新载入文档 %1$s。"
+
+#: src/Buffer.cpp:5740
+msgid "File deleted from disk"
+msgstr ""
+
+#: src/Buffer.cpp:5741
+#, c-format
+msgid ""
+"The file\n"
+" %1$s\n"
+"has been deleted from disk!"
+msgstr ""
+
+#: src/BufferParams.cpp:536
+msgid ""
+"The LaTeX package amsmath is only used if AMS formula types or symbols from "
+"the AMS math toolbars are inserted into formulas"
+msgstr "只有在文章中插入 AMS 公式类型或符号, 才会加载 amsmath 包"
+
+#: src/BufferParams.cpp:538
+msgid ""
+"The LaTeX package amssymb is only used if symbols from the AMS math toolbars "
+"are inserted into formulas"
+msgstr "只有在文章中插入 AMS 的数学符号, amssymb 包才会载入"
+
+#: src/BufferParams.cpp:540
+msgid ""
+"The LaTeX package cancel is only used if \\cancel commands are used in "
+"formulas"
+msgstr "只有在文章中插入 \\cancel 等命令时, cancel 包才会载入"
+
+#: src/BufferParams.cpp:542
+msgid ""
+"The LaTeX package esint is only used if special integral symbols are "
+"inserted into formulas"
+msgstr "只有在文章中插入特殊的积分符号时, esint 包才会载入"
+
+#: src/BufferParams.cpp:544
+msgid ""
+"The LaTeX package mathdots is only used if the command \\iddots is inserted "
+"into formulas"
+msgstr "只有在文章中插入 \\iddots 等命令时, mathdots 包才会载入"
+
+#: src/BufferParams.cpp:546
+msgid ""
+"The LaTeX package mathtools is only used if some mathematical relations are "
+"inserted into formulas"
+msgstr "只有在文章中插入一些数学的关系符号命令时, mathtools 包才会载入"
+
+#: src/BufferParams.cpp:548
+msgid ""
+"The LaTeX package mhchem is only used if either the command \\ce or \\cf is "
+"inserted into formulas"
+msgstr ""
+"只有在文章中插入 \\ce 或 \\cf 等命令时, mhchem 包才会载入. (在数学模式中写化"
+"学式)"
+
+#: src/BufferParams.cpp:550
+msgid ""
+"The LaTeX package stackrel is only used if the command \\stackrel with "
+"subscript is inserted into formulas"
+msgstr "只有在文章中插入 \\stackrel 等命令时, stackrel 包才会载入"
+
+#: src/BufferParams.cpp:552
+msgid ""
+"The LaTeX package stmaryrd is only used if symbols from the St Mary's Road "
+"symbol font for theoretical computer science are inserted into formulas"
+msgstr ""
+"只有在文章中插入来自 St Mary's Road 的理论计算机科学符号时, stmaryrd 包才会载"
+"入"
+
+#: src/BufferParams.cpp:554
+msgid ""
+"The LaTeX package undertilde is only used if you use the math frame "
+"decoration 'utilde'"
+msgstr "只有在文章中插入下划波浪线 'utilde' 图案时，undertilde 包才会载入"
+
+#: src/BufferParams.cpp:789
+#, c-format
+msgid ""
+"The selected document class\n"
+"\t%1$s\n"
+"requires external files that are not available.\n"
+"The document class can still be used, but the\n"
+"document cannot be compiled until the following\n"
+"prerequisites are installed:\n"
+"\t%2$s\n"
+"See section 3.1.2.2 (Class Availability) of the\n"
+"User's Guide for more information."
+msgstr ""
+"选定的文档类\n"
+"\t%1$s\n"
+"所需的外部文件不可用。\n"
+"虽然仍可以使用该文档类，但除非下列文件已安装，\n"
+"否则该文档不能编译:\n"
+"\t%2$s\n"
+"请参阅用户指南 3.1.2.2 节 (Class Availability) 获知详情。"
+
+#: src/BufferParams.cpp:798
+msgid "Document class not available"
+msgstr "未知文档类"
+
+#: src/BufferParams.cpp:1105 src/Color.cpp:283
+#: src/frontends/qt/GuiDocument.cpp:3728
+msgid "greyedout inset text"
+msgstr "灰色嵌入文本"
+
+#: src/BufferParams.cpp:1726 src/BufferParams.cpp:1880
+#: src/BufferParams.cpp:2355 src/Encoding.cpp:264 src/Paragraph.cpp:3174
+#: src/frontends/qt/LaTeXHighlighter.cpp:176
+#: src/insets/InsetCommandParams.cpp:508 src/insets/InsetCommandParams.cpp:516
+#: src/insets/InsetGraphics.cpp:904 src/insets/InsetGraphics.cpp:912
+#: src/insets/InsetListings.cpp:298 src/insets/InsetListings.cpp:306
+#: src/insets/InsetListings.cpp:331 src/mathed/InsetMathMacro.cpp:1174
+#: src/mathed/MathExtern.cpp:1444 src/mathed/MathExtern.cpp:1518
+msgid "LyX Warning: "
+msgstr "LyX 警告: "
+
+#: src/BufferParams.cpp:1727 src/BufferParams.cpp:1881
+#: src/BufferParams.cpp:2356 src/Encoding.cpp:265 src/Paragraph.cpp:3175
+#: src/insets/InsetCommandParams.cpp:509 src/insets/InsetCommandParams.cpp:517
+#: src/insets/InsetGraphics.cpp:905 src/insets/InsetGraphics.cpp:913
+#: src/insets/InsetListings.cpp:299 src/insets/InsetListings.cpp:307
+#: src/mathed/InsetMathMacro.cpp:1175 src/mathed/MathExtern.cpp:1445
+#: src/mathed/MathExtern.cpp:1519
+msgid "uncodable character"
+msgstr "无法编码的字符"
+
+#: src/BufferParams.cpp:1740
+#, fuzzy
+msgid "Uncodable character in document metadata"
+msgstr "作者名中存在非法字符"
+
+#: src/BufferParams.cpp:1742
+#, fuzzy, c-format
+msgid ""
+"The metadata of your document contains glyphs that are unknown in the "
+"current document encoding (namely %1$s).\n"
+"These glyphs are omitted from the output, which may result in incomplete "
+"output.\n"
+"\n"
+"Please select an appropriate document encoding\n"
+"(such as utf8) or change the metadata accordingly."
+msgstr ""
+"文档导言区内有当前文档编码 (%1$s) 无法编码的字符。\n"
+"这些字符会被忽略，因此可能会导致输出不完整。\n"
+"\n"
+"请选择合适的编码 (如 utf8) 或更改导言区代码。"
+
+#: src/BufferParams.cpp:1894
+#, fuzzy
+msgid "Uncodable character in class options"
+msgstr "listings 内嵌项中不能编码的字符"
+
+#: src/BufferParams.cpp:1896
+#, c-format
+msgid ""
+"The class options of your document contain glyphs that are unknown in the "
+"current document encoding (namely %1$s).\n"
+"These glyphs are omitted from the output, which may result in incomplete "
+"output.\n"
+"\n"
+"Please select an appropriate document encoding\n"
+"(such as utf8) or change the class options accordingly."
+msgstr ""
+"文档类选项区内有当前文档编码 (%1$s) 无法编码的字符。\n"
+"这些字符会被忽略，因此可能会导致输出不完整。\n"
+"\n"
+"请选择合适的编码 (如 utf8) 或更改文档类选项。"
+
+#: src/BufferParams.cpp:2369
+msgid "Uncodable character in user preamble"
+msgstr "导言区内有无法编码的字符"
+
+#: src/BufferParams.cpp:2371
+#, c-format
+msgid ""
+"The user preamble of your document contains glyphs that are unknown in the "
+"current document encoding (namely %1$s).\n"
+"These glyphs are omitted from the output, which may result in incomplete "
+"output.\n"
+"\n"
+"Please select an appropriate document encoding\n"
+"(such as utf8) or change the preamble code accordingly."
+msgstr ""
+"文档导言区内有当前文档编码 (%1$s) 无法编码的字符。\n"
+"这些字符会被忽略，因此可能会导致输出不完整。\n"
+"\n"
+"请选择合适的编码 (如 utf8) 或更改导言区代码。"
+
+#: src/BufferParams.cpp:2686
+#, c-format
+msgid ""
+"The layout file:\n"
+"%1$s\n"
+"could not be found. A default textclass with default\n"
+"layouts will be used. LyX will not be able to produce\n"
+"correct output."
+msgstr ""
+"布局文件\n"
+"%1$s\n"
+"无法找到。将使用默认文档类和默认布局。\n"
+"LyX 不能产生正确的输出。"
+
+#: src/BufferParams.cpp:2692
+msgid "Document class not found"
+msgstr "未知文档类"
+
+#: src/BufferParams.cpp:2699
+#, c-format
+msgid ""
+"Due to some error in it, the layout file:\n"
+"%1$s\n"
+"could not be loaded. A default textclass with default\n"
+"layouts will be used. LyX will not be able to produce\n"
+"correct output."
+msgstr ""
+"布局文件\n"
+"%1$s\n"
+"载入出错。将使用默认文档类和默认布局。\n"
+"LyX 不能产生正确的输出。"
+
+#: src/BufferParams.cpp:2705 src/BufferView.cpp:1446 src/BufferView.cpp:1478
+msgid "Could not load class"
+msgstr "无法载入类"
+
+#: src/BufferParams.cpp:2750
+msgid "Error reading internal layout information"
+msgstr "读取内部布局文件信息出错"
+
+#: src/BufferParams.cpp:2751 src/TextClass.cpp:1961 src/TextClass.cpp:1994
+msgid "Read Error"
+msgstr "读取出错"
+
+#: src/BufferParams.cpp:3803
+#, fuzzy
+msgid "No bibliography processor found!"
+msgstr "未定义参考文献。"
+
+#: src/BufferParams.cpp:3805
+#, c-format
+msgid ""
+"The bibliography processor requested by this document (%1$s) is not "
+"available and no appropriate alternative has been found. No bibliography and "
+"references will be generated.\n"
+"Please fix your installation!"
+msgstr ""
+
+#: src/BufferParams.cpp:3813
+#, fuzzy
+msgid "Requested bibliography processor not found!"
+msgstr "找不到参考书目项！"
+
+#: src/BufferParams.cpp:3815
+#, c-format
+msgid ""
+"The bibliography processor requested by this document (%1$s) is not "
+"available. As a fallback, '%2$s' will be used, options are omitted. This "
+"might result in errors or unwanted changes in the bibliography. Please check "
+"carefully!\n"
+"It is suggested to install the missing processor."
+msgstr ""
+
+#: src/BufferView.cpp:183
+msgid "No more insets"
+msgstr "无嵌入项"
+
+#: src/BufferView.cpp:902
+msgid "Save bookmark"
+msgstr "保存书签"
+
+#: src/BufferView.cpp:1158
+msgid "Document is read-only"
+msgstr "文档只读"
+
+#: src/BufferView.cpp:1160
+msgid "Document has been modified externally"
+msgstr "文档已被外部程序修改"
+
+#: src/BufferView.cpp:1169
+msgid "This portion of the document is deleted."
+msgstr "此段文档已被删除。"
+
+#: src/BufferView.cpp:1212 src/BufferView.cpp:2396
+#: src/frontends/qt/GuiView.cpp:4502 src/frontends/qt/GuiView.cpp:4599
+msgid "Absolute filename expected."
+msgstr "需要绝对路径。"
+
+#: src/BufferView.cpp:1444 src/BufferView.cpp:1476
+#, c-format
+msgid "The document class `%1$s' could not be loaded."
+msgstr "无法载入文档类 %1$s。"
+
+#: src/BufferView.cpp:1502
+msgid "No further undo information"
+msgstr "无进一步撤销信息"
+
+#: src/BufferView.cpp:1523
+msgid "No further redo information"
+msgstr "无进一步重做信息"
+
+#: src/BufferView.cpp:1715 src/BufferView.cpp:1730 src/BufferView.cpp:1763
+#, fuzzy
+msgid "Search string not found!"
+msgstr "未找到字符串。"
+
+#: src/BufferView.cpp:1862
+msgid "Mark off"
+msgstr "关闭标记"
+
+#: src/BufferView.cpp:1868
+msgid "Mark on"
+msgstr "启用标记"
+
+#: src/BufferView.cpp:1875
+msgid "Mark removed"
+msgstr "移除标记"
+
+#: src/BufferView.cpp:1878
+msgid "Mark set"
+msgstr "设置标记"
+
+#: src/BufferView.cpp:1988
+msgid "Statistics for the selection:"
+msgstr "统计选定区域:"
+
+#: src/BufferView.cpp:1990
+msgid "Statistics for the document:"
+msgstr "统计文档:"
+
+#: src/BufferView.cpp:1993
+#, c-format
+msgid "%1$d words"
+msgstr "%1$d 词"
+
+#: src/BufferView.cpp:1995
+msgid "One word"
+msgstr "一个词"
+
+#: src/BufferView.cpp:1998
+#, fuzzy, c-format
+msgid "%1$d characters"
+msgstr "无法编码的字符"
+
+#: src/BufferView.cpp:2000
+#, fuzzy
+msgid "One character"
+msgstr "无法编码的字符"
+
+#: src/BufferView.cpp:2003
+#, fuzzy, c-format
+msgid "%1$d characters (no blanks)"
+msgstr "%1$d 字符 (包含空格)"
+
+#: src/BufferView.cpp:2005
+#, fuzzy
+msgid "One character (no blanks)"
+msgstr "一个字符"
+
+#: src/BufferView.cpp:2007
+msgid "Statistics"
+msgstr "统计"
+
+#: src/BufferView.cpp:2232
+#, c-format
+msgid ""
+"`inset-forall' interrupted because number of actions is larger than %1$d"
+msgstr "“inset-forall”已中断，因为需要执行的操作多于 %1$d 步"
+
+#: src/BufferView.cpp:2234
+#, c-format
+msgid "Applied \"%1$s\" to %2$d insets"
+msgstr "已将“%1$s”应用到 %2$d 个内嵌项"
+
+#: src/BufferView.cpp:2242
+msgid "Branch name"
+msgstr "分支名"
+
+#: src/BufferView.cpp:2249 src/frontends/qt/GuiBranches.cpp:225
+msgid "Branch already exists"
+msgstr "分支已存在"
+
+#: src/BufferView.cpp:3207
+#, c-format
+msgid "Inserting document %1$s..."
+msgstr "插入文档 %1$s..."
+
+#: src/BufferView.cpp:3224
+#, c-format
+msgid "Document %1$s inserted."
+msgstr "文档 %1$s 已插入。"
+
+#: src/BufferView.cpp:3226
+#, c-format
+msgid "Could not insert document %1$s"
+msgstr "无法插入文档 %1$s"
+
+#: src/BufferView.cpp:3727
+#, c-format
+msgid ""
+"Could not read the specified document\n"
+"%1$s\n"
+"due to the error: %2$s"
+msgstr ""
+"无法读取指定文档\n"
+"%1$s\n"
+"错误信息: %2$s"
+
+#: src/BufferView.cpp:3729
+msgid "Could not read file"
+msgstr "无法读取文件"
+
+#: src/BufferView.cpp:3736
+#, c-format
+msgid ""
+"%1$s\n"
+" is not readable."
+msgstr ""
+"无法读取\n"
+" %1$s"
+
+#: src/BufferView.cpp:3737 src/frontends/qt/qt_helpers.cpp:319
+#: src/frontends/qt/qt_helpers.cpp:326 src/frontends/qt/qt_helpers.cpp:392
+#: src/output.cpp:39
+msgid "Could not open file"
+msgstr "无法打开文件"
+
+#: src/BufferView.cpp:3744
+msgid "Reading not UTF-8 encoded file"
+msgstr "读入非 UTF-8 编码的文件"
+
+#: src/BufferView.cpp:3745
+msgid ""
+"The file is not UTF-8 encoded.\n"
+"It will be read as local 8Bit-encoded.\n"
+"If this does not give the correct result\n"
+"then please change the encoding of the file\n"
+"to UTF-8 with a program other than LyX.\n"
+msgstr ""
+"此文件没有使用UTF-8编码.\n"
+"LyX 将使用本地 8 位编码读入.\n"
+"如果文件不能正确读入，\n"
+"请使用其他程序改变文件编码\n"
+"至 UTF-8 .\n"
+
+#: src/Changes.cpp:378
+#, fuzzy
+msgid "Uncodable character in author initials"
+msgstr "作者名中存在非法字符"
+
+#: src/Changes.cpp:379
+#, fuzzy, c-format
+msgid ""
+"The author initials '%1$s',\n"
+"used for change tracking, contain the following glyphs that\n"
+"cannot be represented in the current encoding: %2$s.\n"
+"These glyphs will be omitted in the exported LaTeX file.\n"
+"\n"
+"Choose an appropriate document encoding (such as utf8)\n"
+"or change the author initials."
+msgstr ""
+"用于跟踪修订的作者名\n"
+"%1$s\n"
+"含有此编码不能识别的字符: \n"
+"%2$s.\n"
+"这些字符将不会输出到 LaTeX 文件。\n"
+"\n"
+"请选择合适的编码 (如 utf8) 或修改作者名拼写。"
+
+#: src/Changes.cpp:408
+msgid "Uncodable character in author name"
+msgstr "作者名中存在非法字符"
+
+#: src/Changes.cpp:409
+#, c-format
+msgid ""
+"The author name '%1$s',\n"
+"used for change tracking, contains the following glyphs that\n"
+"cannot be represented in the current encoding: %2$s.\n"
+"These glyphs will be omitted in the exported LaTeX file.\n"
+"\n"
+"Choose an appropriate document encoding (such as utf8)\n"
+"or change the spelling of the author name."
+msgstr ""
+"用于跟踪修订的作者名\n"
+"%1$s\n"
+"含有此编码不能识别的字符: \n"
+"%2$s.\n"
+"这些字符将不会输出到 LaTeX 文件。\n"
+"\n"
+"请选择合适的编码 (如 utf8) 或修改作者名拼写。"
+
+#: src/Chktex.cpp:65
+#, c-format
+msgid "ChkTeX warning id # %1$s"
+msgstr "ChkTeX 警告编号 # %1$s"
+
+#: src/Color.cpp:243 src/insets/InsetBibtex.cpp:214
+msgid "none"
+msgstr "无"
+
+#: src/Color.cpp:244
+msgid "black"
+msgstr "黑"
+
+#: src/Color.cpp:245
+msgid "white"
+msgstr "白"
+
+#: src/Color.cpp:246
+msgid "blue"
+msgstr "蓝"
+
+#: src/Color.cpp:247
+msgid "brown"
+msgstr "棕"
+
+#: src/Color.cpp:248
+msgid "cyan"
+msgstr "青"
+
+#: src/Color.cpp:249
+msgid "darkgray"
+msgstr "深灰"
+
+#: src/Color.cpp:250
+msgid "gray"
+msgstr "灰"
+
+#: src/Color.cpp:251
+msgid "green"
+msgstr "绿"
+
+#: src/Color.cpp:252
+msgid "lightgray"
+msgstr "浅灰"
+
+#: src/Color.cpp:253
+msgid "lime"
+msgstr "浅绿"
+
+#: src/Color.cpp:254
+msgid "magenta"
+msgstr "洋红"
+
+#: src/Color.cpp:255
+msgid "olive"
+msgstr "暗黄"
+
+#: src/Color.cpp:256
+msgid "orange"
+msgstr "橙"
+
+#: src/Color.cpp:257
+msgid "pink"
+msgstr "粉"
+
+#: src/Color.cpp:258
+msgid "purple"
+msgstr "深紫"
+
+#: src/Color.cpp:259
+msgid "red"
+msgstr "红"
+
+#: src/Color.cpp:260
+msgid "teal"
+msgstr "暗青"
+
+#: src/Color.cpp:261
+msgid "violet"
+msgstr "浅紫"
+
+#: src/Color.cpp:262
+msgid "yellow"
+msgstr "黄"
+
+#: src/Color.cpp:263
+msgid "cursor"
+msgstr "光标"
+
+#: src/Color.cpp:264
+msgid "background"
+msgstr "背景"
+
+#: src/Color.cpp:265
+msgid "text"
+msgstr "文字"
+
+#: src/Color.cpp:266
+msgid "selection"
+msgstr "选择"
+
+#: src/Color.cpp:267
+#, fuzzy
+msgid "selected math"
+msgstr "选定的文本"
+
+#: src/Color.cpp:268
+msgid "selected text"
+msgstr "选定的文本"
+
+#: src/Color.cpp:269
+msgid "LaTeX text"
+msgstr "LaTeX 文本"
+
+#: src/Color.cpp:270
+#, fuzzy
+msgid "Text label 1"
+msgstr "索引标签"
+
+#: src/Color.cpp:271
+#, fuzzy
+msgid "Text label 2"
+msgstr "索引标签"
+
+#: src/Color.cpp:272
+#, fuzzy
+msgid "Text label 3"
+msgstr "索引标签"
+
+#: src/Color.cpp:273
+msgid "inline completion"
+msgstr "自动完成"
+
+#: src/Color.cpp:275
+#, fuzzy
+msgid "inline completion (non-unique)"
+msgstr "自动完成"
+
+#: src/Color.cpp:277
+msgid "previewed snippet"
+msgstr "预览片段"
+
+#: src/Color.cpp:278
+msgid "note label"
+msgstr "标注标签"
+
+#: src/Color.cpp:279
+msgid "note background"
+msgstr "记事项背景"
+
+#: src/Color.cpp:280
+msgid "comment label"
+msgstr "注释标记"
+
+#: src/Color.cpp:281
+msgid "comment background"
+msgstr "注释背景"
+
+#: src/Color.cpp:282
+msgid "greyedout inset label"
+msgstr "灰色嵌入标签"
+
+#: src/Color.cpp:284
+msgid "greyedout inset background"
+msgstr "灰色嵌入背景"
+
+#: src/Color.cpp:285
+msgid "phantom inset text"
+msgstr "占位内嵌项文本"
+
+#: src/Color.cpp:286
+msgid "shaded box"
+msgstr "阴影边框"
+
+#: src/Color.cpp:287
+msgid "listings background"
+msgstr "程序列表背景"
+
+#: src/Color.cpp:288
+msgid "branch label"
+msgstr "分支标签"
+
+#: src/Color.cpp:289
+msgid "footnote label"
+msgstr "脚注标签"
+
+#: src/Color.cpp:290
+msgid "index label"
+msgstr "索引标签"
+
+#: src/Color.cpp:291
+msgid "margin note label"
+msgstr "旁批标签"
+
+#: src/Color.cpp:292
+msgid "URL label"
+msgstr "URL 标签"
+
+#: src/Color.cpp:293
+msgid "URL text"
+msgstr "URL 文字"
+
+#: src/Color.cpp:294
+msgid "depth bar"
+msgstr "depth bar"
+
+#: src/Color.cpp:295
+msgid "scroll indicator"
+msgstr "滚动条"
+
+#: src/Color.cpp:296
+msgid "language"
+msgstr "语言"
+
+#: src/Color.cpp:297
+msgid "command inset"
+msgstr "命令嵌入项"
+
+#: src/Color.cpp:298
+msgid "command inset background"
+msgstr "命令嵌入项背景"
+
+#: src/Color.cpp:299
+msgid "command inset frame"
+msgstr "命令嵌入项边框"
+
+#: src/Color.cpp:300
+#, fuzzy
+msgid "command inset (broken reference)"
+msgstr "命令嵌入项边框"
+
+#: src/Color.cpp:301
+#, fuzzy
+msgid "button background (broken reference)"
+msgstr "选中按钮背景"
+
+#: src/Color.cpp:302
+msgid "button frame (broken reference)"
+msgstr ""
+
+#: src/Color.cpp:303
+#, fuzzy
+msgid "button background (broken reference) under focus"
+msgstr "选中按钮背景"
+
+#: src/Color.cpp:304
+msgid "special character"
+msgstr "特殊字符"
+
+#: src/Color.cpp:305
+#, fuzzy
+msgid "math text"
+msgstr "左侧文本"
+
+#: src/Color.cpp:306
+msgid "math background"
+msgstr "数学公式背景"
+
+#: src/Color.cpp:307
+msgid "graphics background"
+msgstr "图像背景"
+
+#: src/Color.cpp:308 src/Color.cpp:312
+msgid "math macro background"
+msgstr "数学宏背景"
+
+#: src/Color.cpp:309
+msgid "math frame"
+msgstr "数学公式边框"
+
+#: src/Color.cpp:310
+msgid "math corners"
+msgstr "数学公式边角"
+
+#: src/Color.cpp:311
+msgid "math line"
+msgstr "数学公式线条"
+
+#: src/Color.cpp:313
+msgid "math macro hovered background"
+msgstr "数学宏指向时背景"
+
+#: src/Color.cpp:314
+msgid "math macro label"
+msgstr "数学宏标签"
+
+#: src/Color.cpp:315
+msgid "math macro frame"
+msgstr "数学宏边框"
+
+#: src/Color.cpp:316
+msgid "math macro blended out"
+msgstr "数学宏融合 (blend out)"
+
+#: src/Color.cpp:317
+msgid "math macro old parameter"
+msgstr "数学宏旧参数"
+
+#: src/Color.cpp:318
+msgid "math macro new parameter"
+msgstr "数学宏新参数"
+
+#: src/Color.cpp:319
+msgid "collapsible inset text"
+msgstr "可折叠嵌入项文本"
+
+#: src/Color.cpp:320
+msgid "collapsible inset frame"
+msgstr "可折叠嵌入项边框"
+
+#: src/Color.cpp:321
+msgid "inset background"
+msgstr "嵌入项背景"
+
+#: src/Color.cpp:322
+#, fuzzy
+msgid "inset label"
+msgstr "插入标签"
+
+#: src/Color.cpp:323
+msgid "inset frame"
+msgstr "嵌入项边框"
+
+#: src/Color.cpp:324
+msgid "LaTeX error"
+msgstr "LaTeX 错误"
+
+#: src/Color.cpp:325
+msgid "end-of-line marker"
+msgstr "行尾标记"
+
+#: src/Color.cpp:326
+msgid "appendix marker"
+msgstr "附录标记"
+
+#: src/Color.cpp:327
+msgid "change bar"
+msgstr "change bar"
+
+#: src/Color.cpp:328
+#, fuzzy
+msgid "changes - deleted text (exported output)"
+msgstr "删除的文本"
+
+#: src/Color.cpp:329
+#, fuzzy
+msgid "changes - added text (exported output)"
+msgstr "Adapt outp&ut"
+
+#: src/Color.cpp:330
+#, fuzzy
+msgid "changed text (workarea, 1st author)"
+msgstr "更改文本第一作者"
+
+#: src/Color.cpp:331
+#, fuzzy
+msgid "changed text (workarea, 2nd author)"
+msgstr "更改文本第二作者"
+
+#: src/Color.cpp:332
+#, fuzzy
+msgid "changed text (workarea, 3rd author)"
+msgstr "更改文本第三作者"
+
+#: src/Color.cpp:333
+#, fuzzy
+msgid "changed text (workarea, 4th author)"
+msgstr "更改文本第四作者"
+
+#: src/Color.cpp:334
+#, fuzzy
+msgid "changed text (workarea, 5th author)"
+msgstr "更改文本第五作者"
+
+#: src/Color.cpp:335
+#, fuzzy
+msgid "changed text (workarea, document comparison)"
+msgstr "更改文本第二作者"
+
+#: src/Color.cpp:336
+msgid "changes - deleted text brightness (workarea)"
+msgstr ""
+
+#: src/Color.cpp:337
+msgid "added space markers"
+msgstr ""
+
+#: src/Color.cpp:338
+msgid "table line"
+msgstr "表格边框"
+
+#: src/Color.cpp:339
+msgid "table on/off line"
+msgstr "表格 on/off 边框"
+
+#: src/Color.cpp:340
+msgid "bottom area"
+msgstr "底部"
+
+#: src/Color.cpp:341
+msgid "new page"
+msgstr "新起页"
+
+#: src/Color.cpp:342
+msgid "page break / line break"
+msgstr "分页/换行"
+
+#: src/Color.cpp:343
+msgid "button frame"
+msgstr "按钮边框"
+
+#: src/Color.cpp:344
+msgid "button background"
+msgstr "按钮背景"
+
+#: src/Color.cpp:345
+msgid "button background under focus"
+msgstr "选中按钮背景"
+
+#: src/Color.cpp:346
+msgid "paragraph marker"
+msgstr "段落标记"
+
+#: src/Color.cpp:347
+msgid "preview frame"
+msgstr "预览边框"
+
+#: src/Color.cpp:348
+msgid "regexp frame"
+msgstr "正则表达式边框"
+
+#: src/Color.cpp:349
+#, fuzzy
+msgid "bookmark"
+msgstr "书签(&B)"
+
+#: src/Color.cpp:350
+msgid "inherit"
+msgstr "继承"
+
+#: src/Color.cpp:351
+msgid "ignore"
+msgstr "忽略"
+
+#: src/Converter.cpp:318
+#, fuzzy, c-format
+msgid ""
+"<p>The following LaTeX backend has been configured to allow execution of "
+"external programs for any document:</p><center><p>%1$s</p></center><p>This "
+"is a dangerous configuration. Please, consider using the support offered by "
+"LyX for allowing this privilege only to documents that actually need it, "
+"instead.</p>"
+msgstr ""
+"<p>以下 LaTeX 后端的配置允许任何文档执行外部程序：</p><center><p><tt>%1$s</"
+"tt></p></center><p>这是很危险的。请务必考虑使用 LyX 的外部文件支持，以保证只"
+"有需要执行外部程序的文档才能执行。</p>"
+
+#: src/Converter.cpp:327
+msgid "Security Warning"
+msgstr "安全警告"
+
+#: src/Converter.cpp:342
+#, fuzzy, c-format
+msgid ""
+"<p>The following LaTeX backend has been requested to allow execution of "
+"external programs:</p><center><p>%1$s</p></center><p>The external programs "
+"can execute arbitrary commands on your system, including dangerous ones, if "
+"instructed to do so by a maliciously crafted LyX document.</p>"
+msgstr ""
+"<p>以下 LaTeX 后端被要求允许执行外部程序：</p><center><p><tt>%1$s</tt></p></"
+"center><p>外部程序可以在您的机器上任意运行，恶意代码也不例外，只要它被包含在"
+"精心设计的 LyX 文档里即可。</p>"
+
+#: src/Converter.cpp:349
+#, fuzzy, c-format
+msgid ""
+"<p>The requested operation requires the use of a converter from %2$s to %3$s:"
+"</p><blockquote><p>%1$s</p></blockquote><p>This external program can execute "
+"arbitrary commands on your system, including dangerous ones, if instructed "
+"to do so by a maliciously crafted LyX document.</p>"
+msgstr ""
+"<p>该操作要求使用从 %2$s 到 %3$s 的转换器：</p><blockquote><p><tt>%1$s</tt></"
+"p></blockquote><p>外部程序可以在您的机器上任意运行，恶意代码也不例外，只要它"
+"被包含在精心设计的 LyX 文档里即可。</p>"
+
+#: src/Converter.cpp:359
+msgid "An external converter is disabled for security reasons"
+msgstr "外部转换器因安全原因被禁用"
+
+#: src/Converter.cpp:361
+msgid ""
+"<p><b>Your current preference settings forbid its execution.</b></p><p>(To "
+"change this setting, go to <i>Preferences ▹ File Handling ▹ "
+"Converters</i> and uncheck <i>Security ▹ Forbid needauth converters</"
+"i>.)"
+msgstr ""
+"<p><b>您的当前配置不允许执行外部程序。</b></p><p>(要更改此选项，请前往： <i>"
+"首选项 ▹ 文件处理 ▹ 转换器</i> 并取消选中： <i>安全 ▹ 禁"
+"止使用需要验证的转换器</i>。)"
+
+#: src/Converter.cpp:370
+msgid "A LaTeX backend requires your authorization"
+msgstr "一个 LaTeX 后端需要您许可"
+
+#: src/Converter.cpp:371
+msgid "An external converter requires your authorization"
+msgstr "一个外部转换器需要您许可"
+
+#: src/Converter.cpp:374
+msgid ""
+"<p>Should LaTeX backends be allowed to run external programs?</p><p><b>Allow "
+"them only if you trust the origin/sender of the LyX document!</b></p>"
+msgstr ""
+"<p>您要允许 LaTeX 后端执行外部程序吗？</p><p><b>只有当您信任该 LyX 文档的作者"
+"或发送该文档的人时才能允许！</b></p>"
+
+#: src/Converter.cpp:377
+msgid ""
+"<p>Would you like to run this converter?</p><p><b>Only run if you trust the "
+"origin/sender of the LyX document!</b></p>"
+msgstr ""
+"<p>您要运行此转换器吗？</p><p><b>只有当您信任该 LyX 文档的作者或发送该文档的"
+"人时才能运行！</b></p>"
+
+#: src/Converter.cpp:381
+msgid "Do ¬ allow"
+msgstr "不允许(&N)"
+
+#: src/Converter.cpp:381
+msgid "Do ¬ run"
+msgstr "不运行(&N)"
+
+#: src/Converter.cpp:382
+msgid "A&llow"
+msgstr "允许(&A)"
+
+#: src/Converter.cpp:382
+msgid "&Run"
+msgstr "运行(&R)"
+
+#: src/Converter.cpp:384
+msgid "&Always allow for this document"
+msgstr "对该文档总是允许(&A)"
+
+#: src/Converter.cpp:385
+msgid "&Always run for this document"
+msgstr "对该文档总是运行(&A)"
+
+#: src/Converter.cpp:455 src/Converter.cpp:712 src/Converter.cpp:741
+#, fuzzy
+msgid "Converter killed"
+msgstr "转换器文件缓存"
+
+#: src/Converter.cpp:456 src/Converter.cpp:713 src/Converter.cpp:742
+#, c-format
+msgid ""
+"The following converter was killed by the user.\n"
+" %1$s\n"
+msgstr ""
+
+#: src/Converter.cpp:475 src/Converter.cpp:770 src/Converter.cpp:793
+#: src/Converter.cpp:835
+msgid "Cannot convert file"
+msgstr "无法转换文件"
+
+#: src/Converter.cpp:476
+#, c-format
+msgid ""
+"No information for converting %1$s format files to %2$s.\n"
+"Define a converter in the preferences."
+msgstr ""
+"从 %1$s 转换到 %2$s 的信息不足。\n"
+"请在首选项中定义转换器。"
+
+#: src/Converter.cpp:581 src/frontends/qt/GuiDocument.cpp:2113
+msgid "Pygments driver command not found!"
+msgstr "Pygments 驱动命令未找到！"
+
+#: src/Converter.cpp:582 src/frontends/qt/GuiDocument.cpp:2114
+msgid ""
+"The driver command necessary to use the minted package\n"
+"(pygmentize) has not been found. Make sure you have\n"
+"the python-pygments module installed or, if the driver\n"
+"is named differently, to add the following line to the\n"
+"document preamble:\n"
+"\n"
+"\\AtBeginDocument{\\renewcommand{\\MintedPygmentize}{driver}}\n"
+"\n"
+"where 'driver' is name of the driver command."
+msgstr ""
+"包 pygmentize 所必需的驱动程序命令未找到。\n"
+"请确认您已安装 python-pygments，\n"
+"或者，若您需要使用其他名称的驱动程序，\n"
+"请在文档导言区加入以下命令：\n"
+"\n"
+"\\AtBeginDocument{\\renewcommand{\\MintedPygmentize}{driver}}\n"
+"\n"
+"并将“driver”替换为您的驱动程序命令名称。"
+
+#: src/Converter.cpp:688 src/Format.cpp:708 src/Format.cpp:778
+msgid "Executing command: "
+msgstr "执行命令: "
+
+#: src/Converter.cpp:753
+#, fuzzy
+msgid "Process Killed"
+msgstr "执行(&P)"
+
+#: src/Converter.cpp:754
+#, fuzzy, c-format
+msgid ""
+"The conversion process was killed while running:\n"
+"%1$s"
+msgstr ""
+"执行此程序时出错：\n"
+"%1$s"
+
+#: src/Converter.cpp:759
+msgid "Process Timed Out"
+msgstr ""
+
+#: src/Converter.cpp:760
+#, c-format
+msgid ""
+"The conversion process:\n"
+"%1$s\n"
+"timed out before completing."
+msgstr ""
+
+#: src/Converter.cpp:765
+msgid "Build errors"
+msgstr "编译出错"
+
+#: src/Converter.cpp:766
+msgid "There were errors during the build process."
+msgstr "编译过程出错."
+
+#: src/Converter.cpp:771
+#, c-format
+msgid ""
+"An error occurred while running:\n"
+"%1$s"
+msgstr ""
+"执行此程序时出错：\n"
+"%1$s"
+
+#: src/Converter.cpp:794
+#, c-format
+msgid "Could not move a temporary directory from %1$s to %2$s."
+msgstr "无法移动临时目录 %1$s 至 %2$s."
+
+#: src/Converter.cpp:837
+#, c-format
+msgid "Could not copy a temporary file from %1$s to %2$s."
+msgstr "无法复制临时文件从 %1$s 到 %2$s."
+
+#: src/Converter.cpp:838
+#, c-format
+msgid "Could not move a temporary file from %1$s to %2$s."
+msgstr "无法移动临时文件从 %1$s 到 %2$s."
+
+#: src/Converter.cpp:878
+msgid "Running LaTeX..."
+msgstr "运行 LaTeX..."
+
+#: src/Converter.cpp:895
+#, fuzzy
+msgid "Export canceled"
+msgstr "备份失败"
+
+#: src/Converter.cpp:896
+msgid "The export process was terminated by the user."
+msgstr ""
+
+#: src/Converter.cpp:906
+#, fuzzy
+msgid "Undefined reference"
+msgstr "未定义的分支"
+
+#: src/Converter.cpp:907
+msgid ""
+"Undefined references or citations were found during the build.\n"
+"Please check the warnings in the LaTeX log (Document > LaTeX Log)."
+msgstr ""
+
+#: src/Converter.cpp:919
+#, c-format
+msgid ""
+"LaTeX did not run successfully. Additionally, LyX could not locate the LaTeX "
+"log %1$s."
+msgstr "LaTeX 运行出错并且 LyX 无法获取 LaTeX 日志 %1$s."
+
+#: src/Converter.cpp:922 src/Converter.cpp:929
+msgid "LaTeX failed"
+msgstr "LaTeX 出错"
+
+#: src/Converter.cpp:925
+#, c-format
+msgid ""
+"The external program\n"
+"%1$s\n"
+"finished with an error. It is recommended you fix the cause of the external "
+"program's error (check the logs). "
+msgstr ""
+"外部程序\n"
+"%1$s\n"
+"报错并终止。建议您改正外部程序的错误 (详情见日志)。"
+
+#: src/Converter.cpp:931
+msgid "Output is empty"
+msgstr "空白输出"
+
+#: src/Converter.cpp:932
+msgid "No output file was generated."
+msgstr "未输出文件。"
+
+#: src/Cursor.cpp:417 src/Text.cpp:2206
+msgid ", Inset: "
+msgstr ", 嵌入项: "
+
+#: src/Cursor.cpp:418 src/Text.cpp:2208
+msgid ", Cell: "
+msgstr ""
+
+#: src/Cursor.cpp:419 src/Text.cpp:2211
+msgid ", Position: "
+msgstr ", 位置: "
+
+#: src/CutAndPaste.cpp:221
+#, c-format
+msgid ""
+"The character \"%1$s\" is uncodable in this verbatim context and thus has "
+"not been pasted."
+msgstr "字符 \"%1$s\" 在 Verbatim 环境下不可编码，因此未粘贴。"
+
+#: src/CutAndPaste.cpp:225
+#, c-format
+msgid ""
+"The characters \"%1$s\" are uncodable in this verbatim context and thus have "
+"not been pasted."
+msgstr "字符 \"%1$s\" 在 Verbatim 环境下不可编码，因此未粘贴。"
+
+#: src/CutAndPaste.cpp:262
+msgid "Uncodable content"
+msgstr "无法编码的内容"
+
+#: src/CutAndPaste.cpp:475
+#, c-format
+msgid ""
+"The pasted branch \"%1$s\" is undefined.\n"
+"Do you want to add it to the document's branch list?"
+msgstr ""
+"粘贴的分支 \"%1$s\" 未定义。\n"
+"您想要将其加入文档的分支列表吗？"
+
+#: src/CutAndPaste.cpp:478
+msgid "Unknown branch"
+msgstr "未知分支"
+
+#: src/CutAndPaste.cpp:479
+msgid "&Don't Add"
+msgstr "不添加(&D)"
+
+#: src/CutAndPaste.cpp:861 src/Text.cpp:455
+#, c-format
+msgid "Layout `%1$s' was not found."
+msgstr "未找到布局“%1$s”。"
+
+#: src/CutAndPaste.cpp:862 src/Text.cpp:456
+msgid "Layout Not Found"
+msgstr "未找到布局"
+
+#: src/CutAndPaste.cpp:893
+#, c-format
+msgid "Flex inset %1$s is undefined after reloading `%2$s' layout."
+msgstr "重新载入布局“%2$s”后，自由内嵌项 (flex inset) “%1$s” 未定义。"
+
+#: src/CutAndPaste.cpp:896
+#, c-format
+msgid ""
+"Flex inset %1$s is undefined because of conversion from `%2$s' layout to "
+"`%3$s'."
+msgstr "自由内嵌项 (flex inset) “%1$s”未定义，因为布局由“%2$s”转换为“%3$s”。"
+
+#: src/CutAndPaste.cpp:901
+msgid "Undefined flex inset"
+msgstr "未定义的自由内嵌项 (flex inset)"
+
+#: src/Exporter.cpp:45
+#, c-format
+msgid ""
+"The file %1$s already exists.\n"
+"\n"
+"Do you want to overwrite that file?"
+msgstr ""
+"文件 %1$s 已经存在。\n"
+"您要覆盖它吗？"
+
+#: src/Exporter.cpp:48
+msgid "Overwrite file?"
+msgstr "覆盖文件吗？"
+
+#: src/Exporter.cpp:50
+msgid "&Keep file"
+msgstr "保留文件(&K)"
+
+#: src/Exporter.cpp:51
+msgid "Overwrite &all"
+msgstr "覆盖所有文件(&A)"
+
+#: src/Exporter.cpp:51 src/frontends/qt/GuiView.cpp:823
+msgid "&Cancel export"
+msgstr "取消导出(&C)"
+
+#: src/Exporter.cpp:97
+msgid "Couldn't copy file"
+msgstr "无法复制文件"
+
+#: src/Exporter.cpp:98
+#, c-format
+msgid "Copying %1$s to %2$s failed."
+msgstr "不能从 %1$s 复制到 %2$s."
+
+#: src/Font.cpp:141
+#, c-format
+msgid "Language: %1$s, "
+msgstr "语言: %1$s, "
+
+#: src/Font.cpp:146
+#, c-format
+msgid "Number %1$s"
+msgstr "编号 %1$s"
+
+#: src/FontInfo.cpp:43 src/frontends/qt/GuiCharacter.cpp:148
+#: src/frontends/qt/GuiDocument.cpp:5081 src/frontends/qt/GuiListings.cpp:163
+msgid "Roman"
+msgstr "衬线字体"
+
+#: src/FontInfo.cpp:43 src/frontends/qt/GuiCharacter.cpp:149
+#: src/frontends/qt/GuiDocument.cpp:5081 src/frontends/qt/GuiListings.cpp:163
+msgid "Sans Serif"
+msgstr "非衬线字体"
+
+#: src/FontInfo.cpp:43 src/frontends/qt/GuiCharacter.cpp:150
+#: src/frontends/qt/GuiDocument.cpp:5081 src/frontends/qt/GuiListings.cpp:163
+msgid "Typewriter"
+msgstr "等宽字体"
+
+#: src/FontInfo.cpp:43
+msgid "Symbol"
+msgstr "符号"
+
+#: src/FontInfo.cpp:45 src/FontInfo.cpp:48 src/FontInfo.cpp:51
+#: src/FontInfo.cpp:57 src/FontInfo.cpp:60
+msgid "Inherit"
+msgstr "继承"
+
+#: src/FontInfo.cpp:48 src/frontends/qt/GuiCharacter.cpp:137
+msgid "Medium"
+msgstr "中度"
+
+#: src/FontInfo.cpp:51 src/frontends/qt/GuiCharacter.cpp:52
+msgid "Upright"
+msgstr "正体"
+
+#: src/FontInfo.cpp:51 src/frontends/qt/GuiCharacter.cpp:53
+#: src/frontends/qt/GuiIndex.cpp:48
+msgid "Italic"
+msgstr "斜体"
+
+#: src/FontInfo.cpp:51 src/frontends/qt/GuiCharacter.cpp:54
+msgid "Slanted"
+msgstr "倾斜"
+
+#: src/FontInfo.cpp:51
+msgid "Smallcaps"
+msgstr "小号大写"
+
+#: src/FontInfo.cpp:56 src/frontends/qt/GuiCharacter.cpp:75
+msgid "Increase"
+msgstr "增大字体"
+
+#: src/FontInfo.cpp:56 src/frontends/qt/GuiCharacter.cpp:76
+msgid "Decrease"
+msgstr "减小字体"
+
+#: src/FontInfo.cpp:60
+msgid "Toggle"
+msgstr "切换"
+
+#: src/FontInfo.cpp:617
+#, c-format
+msgid "Emphasis %1$s, "
+msgstr "强调 %1$s, "
+
+#: src/FontInfo.cpp:620
+#, c-format
+msgid "Underline %1$s, "
+msgstr "下划线 %1$s, "
+
+#: src/FontInfo.cpp:623
+#, c-format
+msgid "Double underline %1$s, "
+msgstr "双下划线 %1$s, "
+
+#: src/FontInfo.cpp:626
+#, c-format
+msgid "Wavy underline %1$s, "
+msgstr "波浪下划线 %1$s, "
+
+#: src/FontInfo.cpp:629
+#, c-format
+msgid "Strike out %1$s, "
+msgstr "删除线 %1$s, "
+
+#: src/FontInfo.cpp:632
+#, c-format
+msgid "Cross out %1$s, "
+msgstr "斜删除线 %1$s, "
+
+#: src/FontInfo.cpp:635
+#, c-format
+msgid "Noun %1$s, "
+msgstr "名词 %1$s, "
+
+#: src/Format.cpp:632 src/Format.cpp:645 src/Format.cpp:655
+msgid "Cannot view file"
+msgstr "无法预览文件"
+
+#: src/Format.cpp:633 src/frontends/qt/GuiView.cpp:4199
+#, c-format
+msgid "File does not exist: %1$s"
+msgstr "文件不存在: %1$s"
+
+#: src/Format.cpp:646
+#, c-format
+msgid "No information for viewing %1$s"
+msgstr "无格式 %1$s 的预览信息"
+
+#: src/Format.cpp:656
+#, c-format
+msgid "Auto-view file %1$s failed"
+msgstr "自动预览文件 %1$s 失败"
+
+#: src/Format.cpp:724
+#, fuzzy
+msgid "No Filename"
+msgstr "文件名"
+
+#: src/Format.cpp:725
+#, fuzzy
+msgid "No filename was provided!"
+msgstr "需要绝对路径。"
+
+#: src/Format.cpp:735 src/Format.cpp:748 src/Format.cpp:759
+msgid "Cannot edit file"
+msgstr "无法编辑文件"
+
+#: src/Format.cpp:736
+msgid "LinkBack files can only be edited on Apple Mac OSX."
+msgstr "LinkBack 文件只能用 Mac 编辑。"
+
+#: src/Format.cpp:749
+#, c-format
+msgid "No information for editing %1$s"
+msgstr "无编辑 %1$s 的信息"
+
+#: src/Format.cpp:760
+#, c-format
+msgid "Auto-edit file %1$s failed"
+msgstr "自动编辑文件 %1$s 失败"
+
+#: src/KeyMap.cpp:231 src/KeyMap.cpp:246
+msgid "Could not find bind file"
+msgstr "找不到快捷键配置文件"
+
+#: src/KeyMap.cpp:232
+#, c-format
+msgid ""
+"Unable to find the bind file\n"
+"%1$s.\n"
+"Please check your installation."
+msgstr ""
+"找不到快捷键配置文件: \n"
+"%1$s.\n"
+"请检查您是否已正确安装 LyX。"
+
+#: src/KeyMap.cpp:239
+msgid "Could not find `cua.bind' file"
+msgstr "找不到文件 cua.bind"
+
+#: src/KeyMap.cpp:240
+msgid ""
+"Unable to find the default bind file `cua.bind'.\n"
+"Please check your installation."
+msgstr ""
+"找不到默认快捷键配置文件 cua.bind。\n"
+"请检查您是否已正确安装 LyX。"
+
+#: src/KeyMap.cpp:247
+#, c-format
+msgid ""
+"Unable to find the bind file\n"
+"%1$s.\n"
+"Falling back to default."
+msgstr ""
+"无法找到绑定文件\n"
+"%1$s.\n"
+"使用默认设置。"
+
+#: src/KeySequence.cpp:179
+msgid " options: "
+msgstr " 选项: "
+
+#: src/LaTeX.cpp:64
+#, c-format
+msgid "Waiting for LaTeX run number %1$d"
+msgstr "等待 LaTeX 第 %1$d 次执行"
+
+#: src/LaTeX.cpp:348
+#, fuzzy
+msgid "Running Bibliography Processor."
+msgstr "执行索引处理器。"
+
+#: src/LaTeX.cpp:409
+#, fuzzy
+msgid "Re-Running Bibliography Processor."
+msgstr "执行索引处理器。"
+
+#: src/LaTeX.cpp:451
+msgid "Running Index Processor."
+msgstr "执行索引处理器。"
+
+#: src/LaTeX.cpp:460
+#, fuzzy
+msgid "Index Processor Error"
+msgstr "执行索引处理器。"
+
+#: src/LaTeX.cpp:461
+msgid ""
+"The index processor did not run successfully. Please check the output of "
+"View > Messages Pane!"
+msgstr ""
+
+#: src/LaTeX.cpp:614
+#, fuzzy
+msgid "Running Nomenclature Processor."
+msgstr "执行索引处理器。"
+
+#: src/LaTeX.cpp:1118
+msgid "(NOTE: The erroneous command is in the preamble)"
+msgstr "(注意: 出错的命令在导言区)"
+
+#: src/LaTeX.cpp:1610 src/LaTeX.cpp:1616 src/LaTeX.cpp:1625
+msgid "BibTeX error: "
+msgstr "BibTeX 出错: "
+
+#: src/LaTeX.cpp:1632
+msgid "Biber error: "
+msgstr "Biber 错误: "
+
+#: src/LaTeX.cpp:1659
+#, fuzzy
+msgid "Makeindex error: "
+msgstr "Biber 错误: "
+
+#: src/LaTeX.cpp:1668
+#, fuzzy
+msgid "Xindy error: "
+msgstr "Biber 错误: "
+
+#: src/LaTeXFonts.cpp:238 src/LaTeXFonts.cpp:315
+msgid "Font not available"
+msgstr "字体不可用"
+
+#: src/LaTeXFonts.cpp:239 src/LaTeXFonts.cpp:316
+#, c-format
+msgid ""
+"The LaTeX package `%1$s' needed for the font `%2$s'\n"
+"is not available on your system. LyX will fall back to the default font."
+msgstr ""
+"LaTeX 包 `%1$s' 为字体 `%2$s' 所需。\n"
+"但您的系统中无此包，因而 LyX 将使用备用默认字体。"
+
+#: src/LyX.cpp:145
+msgid "Could not read configuration file"
+msgstr "无法读取配置文件"
+
+#: src/LyX.cpp:146
+#, c-format
+msgid ""
+"Error while reading the configuration file\n"
+"%1$s.\n"
+"Please check your installation."
+msgstr ""
+"读取配置文件出错\n"
+"%1$s.\n"
+"请检查您的安装过程."
+
+#: src/LyX.cpp:399
+msgid "The following files could not be loaded:"
+msgstr "以下文件不能载入："
+
+#: src/LyX.cpp:440
+#, c-format
+msgid "%1$s does not appear like a LyX created temporary directory."
+msgstr "%1$s 似乎并非 LyX 创建的临时目录。"
+
+#: src/LyX.cpp:442
+msgid "Cannot remove temporary directory"
+msgstr "无法删除临时目录"
+
+#: src/LyX.cpp:446
+#, c-format
+msgid "Unable to remove the temporary directory %1$s"
+msgstr "无法删除临时目录 %1$s"
+
+#: src/LyX.cpp:475
+#, c-format
+msgid "Wrong command line option `%1$s'. Exiting."
+msgstr "未知命令行选项 `%1$s'。退出。"
+
+#: src/LyX.cpp:493
+msgid "Missing filename for this operation."
+msgstr "该操作需要一个文件名。"
+
+#: src/LyX.cpp:542
+#, c-format
+msgid "LyX failed to load the following file: %1$s"
+msgstr "LyX 不能载入以下文件：%1$s"
+
+#: src/LyX.cpp:590
+msgid "No textclass is found"
+msgstr "文本类没有找到"
+
+#: src/LyX.cpp:591
+msgid ""
+"LyX will only have minimal functionality because no textclasses have been "
+"found. You can either try to reconfigure LyX normally, try to reconfigure "
+"without checking your LaTeX installation, or continue."
+msgstr ""
+"因为没有找到文本类，LyX 的功能将受到极大限制。您可以像往常一样重新配置 LyX，"
+"或者在不检查 LaTeX 安装实例的情况下重新配置 LyX，或直接继续。"
+
+#: src/LyX.cpp:595
+msgid "&Reconfigure"
+msgstr "重配置(&R)"
+
+#: src/LyX.cpp:596
+msgid "&Without LaTeX"
+msgstr "不用 LaTeX (&W)"
+
+#: src/LyX.cpp:597 src/LyX.cpp:622 src/VCBackend.cpp:974 src/VCBackend.cpp:978
+msgid "&Continue"
+msgstr "继续(&C)"
+
+#: src/LyX.cpp:598 src/LyX.cpp:623 src/LyX.cpp:1118
+msgid "&Exit LyX"
+msgstr "退出 LyX (&E)"
+
+#: src/LyX.cpp:617
+#, fuzzy
+msgid "No python is found"
+msgstr "文本类没有找到"
+
+#: src/LyX.cpp:618
+#, fuzzy
+msgid ""
+"LyX will only have minimal functionality because no python interpreter has "
+"been found. Consider installing python with your software manager or from "
+"the python.org website."
+msgstr ""
+"因为没有找到文本类，LyX 的功能将受到极大限制。您可以像往常一样重新配置 LyX，"
+"或者在不检查 LaTeX 安装实例的情况下重新配置 LyX，或直接继续。"
+
+#: src/LyX.cpp:720
+msgid ""
+"SIGHUP signal caught!\n"
+"Bye."
+msgstr ""
+"捕捉到 SIGHUP 信号！\n"
+"拜拜了您呐。"
+
+#: src/LyX.cpp:724
+msgid ""
+"SIGFPE signal caught!\n"
+"Bye."
+msgstr ""
+"捕捉到 SIGFPE 信号！\n"
+"拜拜了您呐。"
+
+#: src/LyX.cpp:727
+msgid ""
+"SIGSEGV signal caught!\n"
+"Sorry, you have found a bug in LyX, hope you have not lost any data.\n"
+"Please read the bug-reporting instructions in 'Help->Introduction' and send "
+"us a bug report, if necessary. Thanks!\n"
+"Bye."
+msgstr ""
+"捕捉到 SIGSEGV 信号！\n"
+"实在对不起，您找到了 LyX 里的一个软件缺陷。希望您的数据还安然无恙。\n"
+"如有必要，请阅读”帮助->介绍“里的错误报告说明，并发给臣一个错误报告。\n"
+"谢主隆恩！臣告退。"
+
+#: src/LyX.cpp:743
+msgid "LyX crashed!"
+msgstr "LyX 已崩溃！"
+
+#: src/LyX.cpp:777
+msgid "LyX: "
+msgstr "LyX: "
+
+#: src/LyX.cpp:1046
+msgid "Could not create temporary directory"
+msgstr "无法创建临时目录"
+
+#: src/LyX.cpp:1047
+#, c-format
+msgid ""
+"Could not create a temporary directory in\n"
+"\"%1$s\"\n"
+"Make sure that this path exists and is writable and try again."
+msgstr ""
+"未能在此创建临时目录： \n"
+"%1$s\n"
+"请确认目录存在而且可写入，并再试一遍。"
+
+#: src/LyX.cpp:1111
+msgid "Missing user LyX directory"
+msgstr "缺少 LyX 用户目录"
+
+#: src/LyX.cpp:1112
+#, c-format
+msgid ""
+"You have specified a non-existent user LyX directory, %1$s.\n"
+"It is needed to keep your own configuration."
+msgstr ""
+"您指定了一个不存在用户目录：%1$s。\n"
+"该目录需要用来保存您的配置信息。"
+
+#: src/LyX.cpp:1117
+msgid "&Create directory"
+msgstr "创建目录 (&C)"
+
+#: src/LyX.cpp:1119
+msgid "No user LyX directory. Exiting."
+msgstr "无用户 LyX 目录。退出。"
+
+#: src/LyX.cpp:1123
+#, c-format
+msgid "LyX: Creating directory %1$s"
+msgstr "LyX: 创建目录 %1$s"
+
+#: src/LyX.cpp:1128
+#, fuzzy
+msgid ""
+"Failed to create directory. Perhaps wrong -userdir command-line option?\n"
+"Exiting."
+msgstr "未能创建目录。退出。"
+
+#: src/LyX.cpp:1201
+msgid "List of supported debug flags:"
+msgstr "支持的调试符号:"
+
+#: src/LyX.cpp:1210
+#, c-format
+msgid "Bad debug value `%1$s'. Exiting."
+msgstr ""
+
+#: src/LyX.cpp:1221
+msgid ""
+"Usage: lyx [ command line switches ] [ name.lyx ... ]\n"
+"Command line switches (case sensitive):\n"
+"\t-help summarize LyX usage\n"
+"\t-userdir dir set user directory to dir\n"
+"\t-sysdir dir set system directory to dir\n"
+"\t-geometry WxH+X+Y set geometry of the main window\n"
+"\t-dbg feature[,feature]...\n"
+" select the features to debug.\n"
+" Type `lyx -dbg' to see the list of features\n"
+"\t-x [--execute] command\n"
+" where command is a lyx command.\n"
+"\t-e [--export] fmt\n"
+" where fmt is the export format of choice. Look in\n"
+" Tools->Preferences->File Handling->File Formats->Short "
+"Name\n"
+" to see which parameter (which differs from the format "
+"name\n"
+" in the File->Export menu) should be passed. To export to\n"
+" the document's default output format, use 'default'.\n"
+" Note that the order of -e and -x switches matters.\n"
+"\t-E [--export-to] fmt filename\n"
+" where fmt is the export format of choice (see --export),\n"
+" and filename is the destination filename.\n"
+"\t-i [--import] fmt file.xxx\n"
+" where fmt is the import format of choice\n"
+" and file.xxx is the file to be imported.\n"
+"\t-f [--force-overwrite] what\n"
+" where what is either `all', `main' or `none',\n"
+" specifying whether all files, main file only, or no "
+"files,\n"
+" respectively, are to be overwritten during a batch "
+"export.\n"
+" Anything else is equivalent to `all', but is not "
+"consumed.\n"
+"\t--ignore-error-message which\n"
+" allows you to ignore specific LaTeX error messages.\n"
+" Do not use for final documents! Currently supported "
+"values:\n"
+" * missing_glyphs: Fontspec `missing glyphs' error.\n"
+"\t-n [--no-remote]\n"
+" open documents in a new instance\n"
+"\t-r [--remote]\n"
+" open documents in an already running instance\n"
+" (a working lyxpipe is needed)\n"
+"\t-v [--verbose]\n"
+" report on terminal about spawned commands.\n"
+"\t-batch execute commands without launching GUI and exit.\n"
+"\t-version summarize version and build info\n"
+"Check the LyX man page for more details."
+msgstr ""
+"用法: lyx [命令行参数] [ name.lyx ... ]\n"
+"命令行参数 (区分大小写):\n"
+"\t-help LyX 命令行用法帮助\n"
+"\t-userdir dir 设定用户目录为 dir\n"
+"\t-sysdir dir 设定系统目录为 dir\n"
+"\t-geometry WxH+X+Y 设定主窗口大小及位置\n"
+"\t-dbg feature[,feature]...\n"
+" 选择需要调试的功能。\n"
+" 输入 `lyx -dbg' 查看功能列表\n"
+"\t-x [--execute] command\n"
+" 其中 command 是 lyx 命令。\n"
+"\t-e [--export] fmt\n"
+" 其中 fmt 是想要输出的格式。\n"
+" 请查看“工具->首选项->文件处理->文件格式->简称”\n"
+" 查看可传递的参数 (与“文件->输出”中的格式名不同)。\n"
+" 若需转换为默认格式，请使用 'default'。\n"
+" 注意 -e 和 -x 是分先后的。\n"
+"\t-E [--export-to] fmt filename\n"
+" 其中 fmt 是输出格式 (见 --export)，\n"
+" filename 是目标文件名。\n"
+"\t-i [--import] fmt file.xxx\n"
+" 其中 fmt 是导入格式，\n"
+" file.xxx 是要导入的文件。\n"
+"\t-f [--force-overwrite] what\n"
+" 其中 what 可以是 `all', `main' 或 `none'，\n"
+" 分别代表在批处理时全部强制覆盖原文件、仅覆盖主文档或永不覆"
+"盖。\n"
+" 其他选项一律等同于 `all' 。\n"
+"\t--ignore-error-message which\n"
+" 允许您忽略 LaTeX 错误信息。which 是需要忽略的信息。\n"
+" 请勿在最终文档中使用！目前支持的值：\n"
+" * missing_glyphs: Fontspec `missing glyphs' 错误。\n"
+"\t-n [--no-remote]\n"
+" 总是在新例程中打开新文档。\n"
+"\t-r [--remote]\n"
+" 总是在已有例程中打开新文档\n"
+" (需要可用的 lyxpipe)\n"
+"\t-v [--verbose]\n"
+" 把所有执行的命令都絮絮叨叨地贴在终端窗口上。\n"
+"\t-batch 不启动图形界面并执行命令，然后退出。\n"
+"\t-version 显示版本和编译信息。\n"
+"请参阅 LyX 手册 (类 Unix 系统下可参阅 man page) 获得帮助。"
+
+#: src/LyX.cpp:1274 src/frontends/qt/GuiAbout.cpp:217
+msgid " Git commit hash "
+msgstr " Git commit hash "
+
+#: src/LyX.cpp:1285 src/support/Package.cpp:642
+msgid "No system directory"
+msgstr "无系统目录"
+
+#: src/LyX.cpp:1286
+msgid "Missing directory for -sysdir switch"
+msgstr "-sysdir 参数后缺省目录名"
+
+#: src/LyX.cpp:1297
+msgid "No user directory"
+msgstr "无用户目录"
+
+#: src/LyX.cpp:1298
+msgid "Missing directory for -userdir switch"
+msgstr "-userdir 参数后缺失目录名"
+
+#: src/LyX.cpp:1309
+msgid "Incomplete command"
+msgstr "不完整命令"
+
+#: src/LyX.cpp:1310
+msgid "Missing command string after --execute switch"
+msgstr "--execute 参数后缺失命令"
+
+#: src/LyX.cpp:1321
+msgid "Missing file type [eg latex, ps...] after --export-to switch"
+msgstr "--export-to 参数后缺失文件类型 (例如 latex, ps...)"
+
+#: src/LyX.cpp:1326
+msgid "Missing destination filename after --export-to switch"
+msgstr "--export-to 参数后缺失目标文件名"
+
+#: src/LyX.cpp:1339
+msgid "Missing file type [eg latex, ps...] after --export switch"
+msgstr "--export 参数后缺失文件类型 (例如 latex, ps...)"
+
+#: src/LyX.cpp:1352
+msgid "Missing file type [eg latex, ps...] after --import switch"
+msgstr "--import 参数后缺失文件类型 (例如 latex, ps...)"
+
+#: src/LyX.cpp:1357
+msgid "Missing filename for --import"
+msgstr "--import 参数缺失文件名"
+
+#: src/LyXRC.cpp:3121
+msgid ""
+"Consider run-together words, such as \"diskdrive\" for \"disk drive\", as "
+"legal words?"
+msgstr ""
+"是否将连接在一起的词语 (像 \"diskdrive\" 和 \"disk drive\") 处理为正确的词语?"
+
+#: src/LyXRC.cpp:3125
+msgid ""
+"Specify an alternate language. The default is to use the language of the "
+"document."
+msgstr "设置另一种语言。默认使用文档的语言设置。"
+
+#: src/LyXRC.cpp:3133
+msgid ""
+"De-select if you don't want the current selection to be replaced "
+"automatically by what you type."
+msgstr "如果你不希望当前选择被自动替换为你输入的内容，请取消选择。"
+
+#: src/LyXRC.cpp:3137
+msgid ""
+"De-select if you don't want the class options to be reset to defaults after "
+"class change."
+msgstr "如果你不想文档类选项在更换类的时候被重置，请取消选择。"
+
+#: src/LyXRC.cpp:3141
+msgid ""
+"The time interval between auto-saves (in seconds). 0 means no auto-save."
+msgstr "自动保存之间的间隔 (秒)。0 表示禁止自动保存。"
+
+#: src/LyXRC.cpp:3148
+msgid ""
+"The path for storing backup files. If it is an empty string, LyX will store "
+"the backup file in the same directory as the original file."
+msgstr ""
+"存储备份文件的路径。若留空，则 LyX 将把备份文件存储在与原始文件同一目录下。"
+
+#: src/LyXRC.cpp:3152
+msgid ""
+"Define the options of bibtex (cf. man bibtex) or select an alternative "
+"compiler (e.g. mlbibtex or bibulus)."
+msgstr "定义 bibtex 的选项或选择另一个编译器 (如 mlbibtex 或 bibulus)."
+
+#: src/LyXRC.cpp:3156
+msgid "Define the options of the bibtex program for PLaTeX (Japanese LaTeX)."
+msgstr "定义 pLaTeX (日文 LaTeX) 使用的 bibtex 选项。"
+
+#: src/LyXRC.cpp:3160
+msgid ""
+"Keybindings file. Can either specify an absolute path, or LyX will look in "
+"its global and local bind/ directories."
+msgstr ""
+"快捷键配置文件。您可以指定一个绝对路径，也可以让 LyX 在全局和本地 bind/ 目录"
+"寻找。"
+
+#: src/LyXRC.cpp:3164
+msgid "Select to check whether the lastfiles still exist."
+msgstr "选中此项检查是否新近打开文件仍然存在。"
+
+#: src/LyXRC.cpp:3168
+msgid ""
+"Define how to run chktex. E.g. \"chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -n30 -"
+"n38\" Refer to the ChkTeX documentation."
+msgstr ""
+"定义运行 chktex 的方式。如：“chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -n30 -"
+"n38”。请参阅 ChkTeX 文档。"
+
+#: src/LyXRC.cpp:3175
+msgid ""
+"Forbid use of external converters with 'needauth' option to prevent "
+"undesired effects."
+msgstr "禁止使用带“needauth”选项的外部转换器，防止意外发生。"
+
+#: src/LyXRC.cpp:3179
+msgid ""
+"Ask user before calling external converters with 'needauth' option to "
+"prevent undesired effects."
+msgstr "使用带“needauth”选项的外部转换器前征得用户同意，防止意外发生。"
+
+#: src/LyXRC.cpp:3186
+msgid ""
+"LyX normally doesn't update the cursor position if you move the scrollbar. "
+"Set to true if you'd prefer to always have the cursor on screen."
+msgstr ""
+"LyX 一般不会在滚动之后更新光标位置。若您希望总是保持光标在屏幕上，请设定此项"
+"为“是”(true)。"
+
+#: src/LyXRC.cpp:3190
+msgid ""
+"Configure the width of the text cursor. Automatic zoom-controlled cursor "
+"width used when set to 0."
+msgstr "设定文字光标的宽度。若设为0则宽度为系统自适应。"
+
+#: src/LyXRC.cpp:3194
+msgid ""
+"LyX normally doesn't allow the user to scroll further than the bottom of the "
+"document. Set to true if you prefer to scroll the bottom of the document to "
+"the top of the screen"
+msgstr ""
+"LyX一般不许用户滚动到文档末尾之后。若您想要把文档末尾滚动到屏幕正上方，请设定"
+"此项为“是”(true)"
+
+#: src/LyXRC.cpp:3198
+msgid "Make Apple key act as Meta and Control key as Ctrl."
+msgstr "让 Apple 键成为 Meta 键，Control 键成为 Ctrl 键。"
+
+#: src/LyXRC.cpp:3202
+msgid "Use the Mac OS X conventions for cursor movement"
+msgstr "使用 Mac OS X 的光标移动法则"
+
+#: src/LyXRC.cpp:3206
+msgid ""
+"Show a small box around a Math Macro with the macro name when the cursor is "
+"inside."
+msgstr "当光标放在数学公式内的时候，该公式外面将显示一个外框。"
+
+#: src/LyXRC.cpp:3210
+msgid ""
+"Command definition file. Can either specify an absolute path, or LyX will "
+"look in its global and local commands/ directories."
+msgstr ""
+"命令定义文件。您可以指定一个绝对路径，也可以让 LyX 在全局和本地 commands/ 目"
+"录寻找。"
+
+#: src/LyXRC.cpp:3214
+msgid ""
+"The default format used with LFUN_BUFFER_[VIEW|UPDATE] with non-TeX fonts."
+msgstr "使用 LFUN_BUFFER_[VIEW|UPDATE] 并使用非 TeX 字体的默认格式。"
+
+#: src/LyXRC.cpp:3218
+msgid "The default format used with LFUN_BUFFER_[VIEW|UPDATE]."
+msgstr "使用 LFUN_BUFFER_[VIEW|UPDATE] 时的默认格式。"
+
+#: src/LyXRC.cpp:3222
+msgid ""
+"Iconify the dialogs when the main window is iconified. (Affects only dialogs "
+"shown after the change has been made.)"
+msgstr "主窗口最小化时，对话框也最小化。(仅影响此项更改后打开的对话框。)"
+
+#: src/LyXRC.cpp:3226
+msgid "Select how LyX will display any graphics."
+msgstr "选择 LyX 以何种方式显示图像。"
+
+#: src/LyXRC.cpp:3230
+msgid ""
+"The default path for your documents. An empty value selects the directory "
+"LyX was started from."
+msgstr "文档默认目录。留空则 LyX 默认将选择其主程序所在目录。"
+
+#: src/LyXRC.cpp:3234
+msgid "Specify additional chars that can be part of a word."
+msgstr "指定额外的可组词的字符。"
+
+#: src/LyXRC.cpp:3238
+msgid ""
+"The path that LyX will set when offering to choose an example. An empty "
+"value selects the directory LyX was started from."
+msgstr "模板文件的目录。留空则 LyX 默认从其主程序所在目录中选择。"
+
+#: src/LyXRC.cpp:3245
+msgid ""
+"Define the options of makeindex (cf. man makeindex) or select an alternative "
+"compiler. E.g., using xindy/make-rules, the command string would be "
+"\"makeindex.sh -m $$lang\"."
+msgstr ""
+"定义 makeindex 的选项或指定其他编译器。例如，使用 xindy/make-rules 则选项是 "
+"\"makeindex.sh -m $$lang\"."
+
+#: src/LyXRC.cpp:3249
+msgid "Define the options of the index program for PLaTeX (Japanese LaTeX)."
+msgstr "定义 pLaTeX (日文 LaTeX) 要使用的索引程序选项。"
+
+#: src/LyXRC.cpp:3253
+msgid ""
+"Define the options of makeindex (cf. man makeindex) to be used for "
+"nomenclatures. This might differ from the index processing options."
+msgstr ""
+"定义 makeindex 使用的选项，以用于术语表。此选项可以与索引处理程序的选项不同。"
+
+#: src/LyXRC.cpp:3257
+msgid "The command to run the python pygments syntax highlighter."
+msgstr "用于运行 pygments 语法高亮工具的命令。"
+
+#: src/LyXRC.cpp:3266
+msgid ""
+"Use this to set the correct mapping file for your keyboard. You'll need this "
+"if you for instance want to type German documents on an American keyboard."
+msgstr ""
+"请使用此项以设定用于您的键盘的正确映射文件。例如，如果您需要用美式键盘编辑德"
+"语文档，就需要此文件。"
+
+#: src/LyXRC.cpp:3270
+msgid ""
+"Select if a language switching command is needed at the beginning of the "
+"document."
+msgstr "如果文档开头需要有切换语言的命令，请选中。"
+
+#: src/LyXRC.cpp:3274
+msgid ""
+"Select if a language switching command is needed at the end of the document."
+msgstr "如果文档末尾需要有切换语言的命令，请选中。"
+
+#: src/LyXRC.cpp:3278
+msgid ""
+"The LaTeX command for changing from the language of the document to another "
+"language. E.g. \\selectlanguage{$$lang} where $$lang is substituted by the "
+"name of the second language."
+msgstr ""
+"用于改变文档语言的 LaTeX 命令。如: \\selectlanguage{$$lang}，意为将语言更改"
+"为 $$lang。"
+
+#: src/LyXRC.cpp:3282
+msgid "The LaTeX command for changing back to the language of the document."
+msgstr "用于将语言改回文档语言的 LaTeX 命令。"
+
+#: src/LyXRC.cpp:3286
+msgid "The LaTeX command for local changing of the language."
+msgstr "用于局部更改语言的 LaTeX 命令。"
+
+#: src/LyXRC.cpp:3290
+msgid ""
+"De-select if you don't want the language(s) used as an argument to "
+"\\documentclass."
+msgstr "如果您不希望使用的语言成为 \\documentclass 的参数，请不要选中。"
+
+#: src/LyXRC.cpp:3294
+msgid ""
+"The LaTeX command for loading the language package. E.g. "
+"\"\\usepackage{babel}\", \"\\usepackage{omega}\"."
+msgstr ""
+"用于载入语言包的 LaTeX 命令。如: \"\\usepackage{babel}\", "
+"\"\\usepackage{omega}\"。"
+
+#: src/LyXRC.cpp:3298
+msgid ""
+"De-select if you don't want babel to be used when the language of the "
+"document is the default language."
+msgstr "如果您不希望文档语言为默认语言时使用 Babel，请不要选中。"
+
+#: src/LyXRC.cpp:3302
+msgid "De-select if you do not want LyX to scroll to saved position."
+msgstr "如果您不希望 LyX 跳至保存的位置，请不要选中。"
+
+#: src/LyXRC.cpp:3306
+msgid "De-select to prevent loading files opened from the last LyX session."
+msgstr "如果您不希望 LyX 读入上次打开的文件，请不要选中。"
+
+#: src/LyXRC.cpp:3310
+msgid "De-select if you don't want LyX to create backup files."
+msgstr "如果您不希望 LyX 创建备份文件，请不要选中。"
+
+#: src/LyXRC.cpp:3314
+msgid ""
+"Select to control the highlighting of words with a language foreign to that "
+"of the document."
+msgstr "该选项控制如何标亮以该文档语言以外的语言书写的内容。"
+
+#: src/LyXRC.cpp:3322
+msgid "The scrolling speed of the mouse wheel."
+msgstr "鼠标滚轮的滚动速度。"
+
+#: src/LyXRC.cpp:3326
+msgid "The completion popup delay."
+msgstr "自动完成提示框延时。"
+
+#: src/LyXRC.cpp:3330
+msgid "Select to display the completion popup in math mode."
+msgstr "选中此项以在数学模式中显示自动完成提示框。"
+
+#: src/LyXRC.cpp:3334
+msgid "Select to display the completion popup in text mode."
+msgstr "选中此项以在文本模式中显示自动完成提示框。"
+
+#: src/LyXRC.cpp:3338
+msgid ""
+"Show the completion popup without delay after non-unique completion attempt."
+msgstr "若仅有一种自动完成的选项，就立刻显示提示框。"
+
+#: src/LyXRC.cpp:3342
+msgid ""
+"Show a small triangle on the cursor to indicate that a completion is "
+"available."
+msgstr "若自动完成可用，就在光标上添加一个小三角。"
+
+#: src/LyXRC.cpp:3346
+msgid "The inline completion delay."
+msgstr "自动完成功能延时。"
+
+#: src/LyXRC.cpp:3350
+msgid "Select to display the inline completion in math mode."
+msgstr "选中此项以在数学模式中启用自动完成。"
+
+#: src/LyXRC.cpp:3354
+msgid "Select to display the inline completion in text mode."
+msgstr "选中此项以在文本模式中启用自动完成。"
+
+#: src/LyXRC.cpp:3358
+msgid "Use \"...\" to shorten long completions."
+msgstr "使用 \"...\" 缩短过长的自动完成项。"
+
+#: src/LyXRC.cpp:3362
+msgid "Allow TeXMacs shorthand, like => converting to \\Rightarrow."
+msgstr "允许使用 TeXMacs 快捷输入法，例如将 => 转换为 \\Rightarrow。"
+
+#: src/LyXRC.cpp:3366
+#, c-format
+msgid "Maximal number of lastfiles. Up to %1$d can appear in the file menu."
+msgstr "“最近打开文件”的最大显示数目。“文件”菜单中，最多可以出现 %1$d 个。"
+
+#: src/LyXRC.cpp:3371
+msgid ""
+"Specify those directories which should be prepended to the PATH environment "
+"variable.\n"
+"Use the OS native format."
+msgstr "指定在 PATH 环境变量中需要添加的目录。格式遵照操作系统格式。"
+
+#: src/LyXRC.cpp:3377
+msgid "Shows a typeset preview of things such as math"
+msgstr "显示某些元素的排版预览，如数学公式"
+
+#: src/LyXRC.cpp:3381
+msgid "Previewed equations will have \"(#)\" labels rather than numbered ones"
+msgstr "预览公式的标签为 \"(#)\" 而非真实编号"
+
+#: src/LyXRC.cpp:3385
+msgid "Scale the preview size to suit."
+msgstr "将预览尺寸缩放为合适的大小。"
+
+#: src/LyXRC.cpp:3389
+msgid "The option to print out in landscape."
+msgstr "横向打印的参数。"
+
+#: src/LyXRC.cpp:3393
+msgid "Option to specify the dimensions of the print paper."
+msgstr "指定输出纸张大小的选项。"
+
+#: src/LyXRC.cpp:3397
+msgid "The option to specify paper type."
+msgstr "指定纸张大小的参数。"
+
+#: src/LyXRC.cpp:3401
+msgid ""
+"Select to have visual bidi cursor movement, unselect for logical movement."
+msgstr ""
+"选择此项以对从右向左的语言使用视觉式光标移动方式。取消选中此项以使用逻辑式光"
+"标移动方式。"
+
+#: src/LyXRC.cpp:3405
+msgid ""
+"Specify whether, closing the last view of an open document, LyX should close "
+"the document (yes), hide it (no), or ask the user (ask)."
+msgstr ""
+"指定 LyX 在关闭最后一个文档视图的行为是关闭文档 (是)，隐藏文档 (否)，或是询问"
+"用户 (询问)。"
+
+#: src/LyXRC.cpp:3409
+msgid ""
+"DPI (dots per inch) of your monitor is auto-detected by LyX. If that goes "
+"wrong, override the setting here."
+msgstr "LyX 会自动选择显示器分辨率 (DPI)。如果出错，您可以在此覆盖自动设置。"
+
+#: src/LyXRC.cpp:3415
+msgid "The screen fonts used to display the text while editing."
+msgstr "用来显示编辑文本的屏幕字体。"
+
+#: src/LyXRC.cpp:3424
+msgid ""
+"Allow bitmap fonts to be resized. If you are using a bitmap font, selecting "
+"this option may make some fonts look blocky in LyX. Deselecting this option "
+"makes LyX use the nearest bitmap font size available, instead of scaling."
+msgstr ""
+"允许点阵字体缩放。如果您使用点阵字体，使用此选项可能会看到明显的方块状边缘。"
+"取消选中此项，则 LyX 会使用最接近的点阵字体大小而非缩放。"
+
+#: src/LyXRC.cpp:3428
+msgid "The font sizes used for calculating the scaling of the screen fonts."
+msgstr "用于计算屏幕字体缩放比例的字体大小。"
+
+#: src/LyXRC.cpp:3433
+#, no-c-format
+msgid ""
+"The zoom percentage for screen fonts. A setting of 100% will make the fonts "
+"roughly the same size as on paper."
+msgstr "屏幕字体的缩放比例。设为 100% 可以让字体大小与打印时几乎一致。"
+
+#: src/LyXRC.cpp:3437
+msgid "Allow session manager to save and restore windows geometry."
+msgstr "允许保存和读入窗口位置及大小。"
+
+#: src/LyXRC.cpp:3441
+msgid ""
+"This starts the lyxserver. The pipes get an additional extension \".in\" and "
+"\".out\". Only for advanced users."
+msgstr "这将启动 lyxserver。管道的扩展名是 \".in\" 和 \".out\"。仅限高级用户。"
+
+#: src/LyXRC.cpp:3448
+msgid "De-select if you don't want the startup banner."
+msgstr "如果您不想显示启动画面，请不要选择。"
+
+#: src/LyXRC.cpp:3452
+msgid ""
+"LyX will place its temporary directories in this path. They will be deleted "
+"when you quit LyX."
+msgstr "LyX 的临时目录。退出 LyX 时该目录会被清空。"
+
+#: src/LyXRC.cpp:3456
+msgid "This is the place where the files of the thesaurus library reside."
+msgstr "请在此输入同义词词典的路径。"
+
+#: src/LyXRC.cpp:3460
+msgid ""
+"The path that LyX will set when offering to choose a template. An empty "
+"value selects the directory LyX was started from."
+msgstr "LyX 的模板路径。留空则 LyX 会默认设置为 LyX 的安装目录。"
+
+#: src/LyXRC.cpp:3470
+msgid ""
+"Specify those directories which should be prepended to the TEXINPUTS "
+"environment variable.\n"
+"A '.' represents the current document directory. Use the OS native format."
+msgstr ""
+"指定需要放在 TEXINPUTS 环境变量后面的目录。\n"
+"输入“.”以表示当前文档目录。使用操作系统的路径格式。"
+
+#: src/LyXRC.cpp:3477
+msgid ""
+"The UI (user interface) file. Can either specify an absolute path, or LyX "
+"will look in its global and local ui/ directories."
+msgstr "用户界面文件。您可以输入一个绝对路径，或让 LyX 在 ui/ 目录下自动寻找。"
+
+#: src/LyXRC.cpp:3487
+msgid ""
+"Enable use the system colors for some things like main window background and "
+"selection."
+msgstr "在选择主窗口背景和选定文本颜色时，使用系统颜色。"
+
+#: src/LyXRC.cpp:3491
+msgid "Enable the automatic appearance of tool tips in the work area."
+msgstr "允许在工作区内自动弹出工具提示。"
+
+#: src/LyXRC.cpp:3495
+msgid "Specify the paper command to DVI viewer (leave empty or use \"-paper\")"
+msgstr "为 DVI 查看器指定 paper 命令 (留空或使用“ -paper”)"
+
+#: src/LyXVC.cpp:49
+#, c-format
+msgid "%1$s lock"
+msgstr "%1$s 锁"
+
+#: src/LyXVC.cpp:111
+#, c-format
+msgid "Do you want to retrieve the document %1$s from version control?"
+msgstr "您希望从版本控制程序中读取文档 %1$s 吗?"
+
+#: src/LyXVC.cpp:113
+msgid "Retrieve from version control?"
+msgstr "从版本控制程序中读取文档?"
+
+#: src/LyXVC.cpp:114
+msgid "&Retrieve"
+msgstr "获取(&R)"
+
+#: src/LyXVC.cpp:148
+msgid "Document not saved"
+msgstr "未保存文档"
+
+#: src/LyXVC.cpp:149
+msgid "You must save the document before it can be registered."
+msgstr "在登记前您必须保存文件。"
+
+#: src/LyXVC.cpp:191
+msgid "LyX VC: Initial description"
+msgstr "LyX VC: 初始描述"
+
+#: src/LyXVC.cpp:192 src/LyXVC.cpp:199
+msgid "(no initial description)"
+msgstr "(无初始描述)"
+
+#: src/LyXVC.cpp:211 src/LyXVC.cpp:230
+msgid "LyX VC: Log message"
+msgstr "LyX VC: 日志消息"
+
+#: src/LyXVC.cpp:212 src/LyXVC.cpp:218 src/LyXVC.cpp:231 src/LyXVC.cpp:237
+#: src/LyXVC.cpp:248
+msgid "(no log message)"
+msgstr "(无日志消息)"
+
+#: src/LyXVC.cpp:252 src/frontends/qt/GuiView.cpp:4062
+msgid "LyX VC: Log Message"
+msgstr "LyX VC: 记录消息"
+
+#: src/LyXVC.cpp:304
+#, c-format
+msgid ""
+"Reverting to the stored version of the document %1$s will lose all current "
+"changes.\n"
+"\n"
+"Do you want to revert to the older version?"
+msgstr ""
+"回退到磁盘上保存的版本 %1$s 会丢失所有现有改变。\n"
+"\n"
+"您确信使用较旧的版本吗?"
+
+#: src/LyXVC.cpp:309
+msgid "Revert to stored version of document?"
+msgstr "恢复到已保存的版本吗？"
+
+#: src/LyXVC.cpp:310 src/frontends/qt/GuiView.cpp:4648
+msgid "&Revert"
+msgstr "还原(&R)"
+
+#: src/Paragraph.cpp:2226
+msgid "Senseless with this layout!"
+msgstr "在此布局设置下无意义！"
+
+#: src/Paragraph.cpp:2280
+msgid "Alignment not permitted"
+msgstr "无效对齐方式"
+
+#: src/Paragraph.cpp:2281
+msgid ""
+"The new layout does not permit the alignment previously used.\n"
+"Setting to default."
+msgstr ""
+"新布局文件不允许之前的对齐设置。\n"
+"还原为默认设置。"
+
+#: src/Text.cpp:482
+msgid "Unknown Inset"
+msgstr "未知嵌入项"
+
+#: src/Text.cpp:598 src/insets/InsetTabular.cpp:476
+msgid "Change tracking author index missing"
+msgstr "跟踪修订作者索引丢失"
+
+#: src/Text.cpp:599 src/insets/InsetTabular.cpp:477
+#, c-format
+msgid ""
+"A change tracking author information for index %1$d is missing. This can "
+"happen after a wrong merge by a version control system. In this case, either "
+"fix the merge, or have this information missing until the corresponding "
+"tracked changes are merged or this user edits the file again.\n"
+msgstr ""
+"索引 %1$d 的跟踪修订作者信息丢失。此情形可能会在版本控制系统错误地合并版本后"
+"发生。因此，您可以选择修复此版本，也可以在对应的已跟踪修订合并之前或该用户编"
+"辑此文件之前忽略此现象。\n"
+
+#: src/Text.cpp:615
+msgid "Unknown token"
+msgstr "未知关键词"
+
+#: src/Text.cpp:992
+msgid ""
+"You cannot insert a space at the beginning of a paragraph. Please read the "
+"Tutorial."
+msgstr "您不能在段首输入空格。请参阅功能简介。"
+
+#: src/Text.cpp:1001
+msgid "You cannot type two spaces this way. Please read the Tutorial."
+msgstr "您不能如此输入两个空格。请参阅功能简介。"
+
+#: src/Text.cpp:1012
+msgid "Character is uncodable in this verbatim context."
+msgstr "在此 Verbatim 环境下，该字符不能编码。"
+
+#: src/Text.cpp:2151
+msgid "[Change Tracking] "
+msgstr "[追踪改变] "
+
+#: src/Text.cpp:2159
+#, c-format
+msgid "Changed by %1$s[[author]] on %2$s[[date]]. "
+msgstr "由 %1$s[[author]] 在 %2$s[[date]] 修改。"
+
+#: src/Text.cpp:2169 src/mathed/InsetMathFont.cpp:238
+#: src/mathed/InsetMathFontOld.cpp:111
+#, c-format
+msgid "Font: %1$s"
+msgstr "字体: %1$s"
+
+#: src/Text.cpp:2174
+#, c-format
+msgid ", Depth: %1$d"
+msgstr ", 深度: %1$d"
+
+#: src/Text.cpp:2180
+msgid ", Spacing: "
+msgstr ", 间隔: "
+
+#: src/Text.cpp:2186 src/frontends/qt/GuiDocument.cpp:909
+msgid "OneHalf"
+msgstr "1.5 倍行距"
+
+#: src/Text.cpp:2192
+msgid "Other ("
+msgstr "其他 ("
+
+#: src/Text.cpp:2203
+#, fuzzy
+msgid ", Style: "
+msgstr "简历样式:"
+
+#: src/Text.cpp:2209
+msgid ", Paragraph: "
+msgstr ", 段落: "
+
+#: src/Text.cpp:2210
+msgid ", Id: "
+msgstr ", Id: "
+
+#: src/Text.cpp:2220
+msgid ", Char: 0x"
+msgstr ", Char: 0x"
+
+#: src/Text.cpp:2222
+msgid ", Boundary: "
+msgstr ", 边界: "
+
+#: src/Text.cpp:2836
+msgid "No font change defined."
+msgstr "未修改字体。"
+
+#: src/Text.cpp:3542
+msgid "Math editor mode"
+msgstr "数学编辑模式"
+
+#: src/Text.cpp:3544
+msgid "No valid math formula"
+msgstr "非法数学公式"
+
+#: src/Text.cpp:3552 src/mathed/InsetMathNest.cpp:1337
+msgid "Already in regular expression mode"
+msgstr "已经在正则表达式模式下"
+
+#: src/Text.cpp:3565
+msgid "Regexp editor mode"
+msgstr "正则表达式编辑模式"
+
+#: src/Text.cpp:3947
+msgid "Action flattens document structure"
+msgstr ""
+
+#: src/Text.cpp:3948
+msgid ""
+"This action will cause some headings that have been on different level "
+"before to be on the same level since there is no more lower or higher "
+"heading level. Continue still?"
+msgstr ""
+
+#: src/Text.cpp:3953
+msgid "&Yes, continue nonetheless"
+msgstr ""
+
+#: src/Text.cpp:3954
+msgid "&No, quit operation"
+msgstr ""
+
+#: src/Text.cpp:5007
+msgid "Layout "
+msgstr "显示布局 "
+
+#: src/Text.cpp:5008 src/Text.cpp:5589
+msgid " not known"
+msgstr " 未知"
+
+#: src/Text.cpp:5588
+#, fuzzy
+msgid "Table Style "
+msgstr "表格注释"
+
+#: src/Text.cpp:5782 src/frontends/qt/GuiApplication.cpp:1889
+msgid "Missing argument"
+msgstr "缺失参数"
+
+#: src/Text.cpp:5947
+msgid "Invalid argument (number exceeds stack size)!"
+msgstr ""
+
+#: src/Text.cpp:5951
+msgid "Invalid argument (must be a non-negative number)!"
+msgstr ""
+
+#: src/Text.cpp:5956 src/Text.cpp:5970
+#, c-format
+msgid "Text properties applied: %1$s"
+msgstr ""
+
+#: src/Text.cpp:6129
+msgid "Path to thesaurus directory not set!"
+msgstr "未设定同义词词典目录！"
+
+#: src/Text.cpp:6130
+msgid ""
+"The path to the thesaurus directory has not been specified.\n"
+"The thesaurus is not functional.\n"
+"Please refer to sec. 6.15.1 of the User's Guide for setup\n"
+"instructions."
+msgstr ""
+"未指定同义词词典目录。同义词词典不可用。\n"
+"请参考用户手册 6.15.1 节来设置。"
+
+#: src/Text.cpp:6256 src/Text.cpp:6267
+msgid "Paragraph layout set"
+msgstr "段落布局"
+
+#: src/TextClass.cpp:124
+msgid "Plain Layout"
+msgstr "一般布局"
+
+#: src/TextClass.cpp:943
+msgid "Missing File"
+msgstr "文件丢失"
+
+#: src/TextClass.cpp:944
+msgid "Could not find stdinsets.inc! This may lead to data loss!"
+msgstr "无法找到 stdinsets.inc！这会导致数据丢失！"
+
+#: src/TextClass.cpp:947
+msgid "Corrupt File"
+msgstr "文件损坏"
+
+#: src/TextClass.cpp:948
+msgid "Could not read stdinsets.inc! This may lead to data loss!"
+msgstr "无法读取 stdinsets.inc！可能会导致数据丢失。"
+
+#: src/TextClass.cpp:1634
+#, fuzzy, c-format
+msgid "%1$s ##"
+msgstr "%1$s 锁"
+
+#: src/TextClass.cpp:1635
+#, fuzzy, c-format
+msgid "%1$s (Float)"
+msgstr "%1$s 锁"
+
+#: src/TextClass.cpp:1640
+#, c-format
+msgid "Sub-%1$s ##"
+msgstr ""
+
+#: src/TextClass.cpp:1641
+#, c-format
+msgid "Sub-%1$s (Float)"
+msgstr ""
+
+#: src/TextClass.cpp:1937
+#, c-format
+msgid ""
+"The module %1$s has been requested by\n"
+"this document but has not been found in the list of\n"
+"available modules. If you recently installed it, you\n"
+"probably need to reconfigure LyX.\n"
+msgstr "未找到模块 %1$s，请安装它。如果你已经安装，请重新配置 LyX。\n"
+
+#: src/TextClass.cpp:1941
+msgid "Module not available"
+msgstr "模块未找到"
+
+#: src/TextClass.cpp:1948
+#, c-format
+msgid ""
+"The module %1$s requires a package that is not\n"
+"available in your LaTeX installation, or a converter that\n"
+"you have not installed. LaTeX output may not be possible.\n"
+"Missing prerequisites:\n"
+"\t%2$s\n"
+"See section 3.1.2.3 (Modules) of the User's Guide for more information."
+msgstr ""
+"您没有安装模块 %1$s 需要使用的某些包或转换器。\n"
+"可能不能输出 LaTeX。\n"
+"缺失的依赖包：\n"
+"\t%2$s\n"
+"请参见用户手册 3.1.2.3 节获取详情。"
+
+#: src/TextClass.cpp:1955 src/TextClass.cpp:1988
+msgid "Package not available"
+msgstr "包未找到"
+
+#: src/TextClass.cpp:1960
+#, c-format
+msgid "Error reading module %1$s\n"
+msgstr "读取模块 %1$s 错误\n"
+
+#: src/TextClass.cpp:1972
+#, c-format
+msgid ""
+"The cite engine %1$s has been requested by\n"
+"this document but has not been found in the list of\n"
+"available engines. If you recently installed it, you\n"
+"probably need to reconfigure LyX.\n"
+msgstr "未找到引用处理引擎 %1$s，请安装它。如果你已经安装，请重新配置 LyX。\n"
+
+#: src/TextClass.cpp:1976
+msgid "Cite Engine not available"
+msgstr "引用处理引擎未找到"
+
+#: src/TextClass.cpp:1981
+#, c-format
+msgid ""
+"The cite engine %1$s requires a package that is not\n"
+"available in your LaTeX installation, or a converter that\n"
+"you have not installed. LaTeX output may not be possible.\n"
+"Missing prerequisites:\n"
+"\t%2$s\n"
+"See section 3.1.2.3 (Modules) of the User's Guide for more information."
+msgstr ""
+"您没有安装引用处理引擎 %1$s 需要使用的某些包或转换器。\n"
+"可能不能输出 LaTeX。\n"
+"缺失的依赖包：\n"
+"\t%2$s\n"
+"请参见用户手册 3.1.2.3 节获取详情。"
+
+#: src/TextClass.cpp:1993
+#, c-format
+msgid "Error reading cite engine %1$s\n"
+msgstr "读取引用引擎 %1$s 错误\n"
+
+#: src/TocBackend.cpp:69 src/insets/InsetInclude.cpp:1385
+msgid "MISSING: "
+msgstr ""
+
+#: src/TocBackend.cpp:273 src/insets/InsetIndex.cpp:1017
+#: src/insets/InsetIndex.cpp:1052
+msgid "unknown type!"
+msgstr "未知类型！"
+
+#: src/TocBackend.cpp:276
+#, c-format
+msgid "Index Entries (%1$s)"
+msgstr "索引项 (%1$s)"
+
+#: src/TocBackend.cpp:292 src/insets/InsetTOC.cpp:75
+msgid "Table of Contents"
+msgstr "目录"
+
+#: src/TocBackend.cpp:293
+msgid "Changes"
+msgstr "改变"
+
+#: src/TocBackend.cpp:294
+msgid "Senseless"
+msgstr "无意义"
+
+#: src/TocBackend.cpp:295
+msgid "Citations"
+msgstr "引用"
+
+#: src/TocBackend.cpp:296
+msgid "Labels and References"
+msgstr "标签和引用"
+
+#: src/TocBackend.cpp:297
+msgid "Broken References and Citations"
+msgstr ""
+
+#: src/TocBackend.cpp:299 src/frontends/qt/GuiDocument.cpp:1824
+msgid "Child Documents"
+msgstr "子文档"
+
+#: src/TocBackend.cpp:300
+#, fuzzy
+msgid "Graphics[[listof]]"
+msgstr "图形"
+
+#: src/TocBackend.cpp:301
+msgid "Equations"
+msgstr "公式"
+
+#: src/TocBackend.cpp:304
+msgid "Nomenclature Entries"
+msgstr "术语项"
+
+#: src/VCBackend.cpp:64
+msgid "Check whether the GNU RCS package is installed on your system."
+msgstr ""
+
+#: src/VCBackend.cpp:65 src/VCBackend.cpp:880 src/VCBackend.cpp:885
+#: src/VCBackend.cpp:934 src/VCBackend.cpp:993 src/VCBackend.cpp:1052
+#: src/VCBackend.cpp:1060 src/VCBackend.cpp:1348 src/VCBackend.cpp:1450
+#: src/VCBackend.cpp:1456 src/VCBackend.cpp:1479 src/VCBackend.cpp:1964
+#: src/frontends/qt/GuiView.cpp:3978 src/frontends/qt/GuiView.cpp:4021
+msgid "Revision control error."
+msgstr "版本控制出错。"
+
+#: src/VCBackend.cpp:66
+#, c-format
+msgid ""
+"Some problem occurred while running the command:\n"
+"'%1$s'."
+msgstr "执行 %1$s 出错。"
+
+#: src/VCBackend.cpp:641
+msgid "Up-to-date"
+msgstr "最新"
+
+#: src/VCBackend.cpp:643
+msgid "Locally Modified"
+msgstr "已在本地修改"
+
+#: src/VCBackend.cpp:645
+msgid "Locally Added"
+msgstr "已在本地添加"
+
+#: src/VCBackend.cpp:647
+msgid "Needs Merge"
+msgstr "需要合并"
+
+#: src/VCBackend.cpp:649
+msgid "Needs Checkout"
+msgstr "需要领有 (check out)"
+
+#: src/VCBackend.cpp:651
+msgid "No CVS file"
+msgstr "无 CVS 文件"
+
+#: src/VCBackend.cpp:653
+msgid "Cannot retrieve CVS status"
+msgstr "无法获得 CVS 状态"
+
+#: src/VCBackend.cpp:881
+msgid ""
+"The repository version is newer then the current check out.\n"
+"You have to update from repository first or revert your changes."
+msgstr ""
+"存储库的版本比当前拥有 (check out) 的版本新。\n"
+"您必须首先从存储库更新文档，或撤销您的更改。"
+
+#: src/VCBackend.cpp:886
+#, c-format
+msgid ""
+"Bad status when checking in changes.\n"
+"\n"
+"'%1$s'\n"
+"\n"
+msgstr ""
+"提交 (check in) 更改时出现状态异常: \n"
+"\n"
+"%1$s\n"
+"\n"
+"\n"
+
+#: src/VCBackend.cpp:935 src/VCBackend.cpp:1480
+#, c-format
+msgid ""
+"Error when updating from repository.\n"
+"You have to manually resolve the conflicts NOW!\n"
+"'%1$s'.\n"
+"\n"
+"After pressing OK, LyX will try to reopen the resolved document."
+msgstr ""
+"由存储库更新时出错。\n"
+"您必须立刻手动解决如下冲突：\n"
+"%1$s\n"
+"点击“确定”后，LyX 将尝试重新打开已修复的文档。"
+
+#: src/VCBackend.cpp:969
+#, c-format
+msgid ""
+"There were detected changes in the working directory:\n"
+"%1$s\n"
+"\n"
+"Possible file conflicts must be then resolved manually or you will need to "
+"revert back to the repository version."
+msgstr ""
+"工作目录中发现如下修改:\n"
+"%1$s\n"
+"您必须手动解决可能的文件冲突，否则您必须回退到存储库中的版本。"
+
+#: src/VCBackend.cpp:973 src/VCBackend.cpp:977 src/VCBackend.cpp:1521
+#: src/VCBackend.cpp:1525
+msgid "Changes detected"
+msgstr "发现修改"
+
+#: src/VCBackend.cpp:974 src/VCBackend.cpp:978
+msgid "&Abort"
+msgstr "放弃"
+
+#: src/VCBackend.cpp:974 src/VCBackend.cpp:1522
+msgid "View &Log ..."
+msgstr "查看日志(&L)"
+
+#: src/VCBackend.cpp:994
+#, c-format
+msgid ""
+"Error when updating document %1$s from repository.\n"
+"You have to manually resolve the conflicts NOW!\n"
+"'%2$s'.\n"
+"\n"
+"After pressing OK, LyX will try to reopen the resolved document."
+msgstr ""
+"由存储库更新文档 %1$s 时出错。\n"
+"您必须立刻手动解决如下冲突：\n"
+"%2$s\n"
+"点击“确定”后，LyX 将尝试重新打开已修复的文档。"
+
+#: src/VCBackend.cpp:1053
+#, c-format
+msgid ""
+"The document %1$s is not in repository.\n"
+"You have to check in the first revision before you can revert."
+msgstr ""
+"文档 %1$s 不在存储库中。\n"
+"您必须先上传 (check in) 第一个版本才能使用回退功能。"
+
+#: src/VCBackend.cpp:1061
+#, c-format
+msgid ""
+"Cannot revert document %1$s to repository version.\n"
+"The status '%2$s' is unexpected."
+msgstr ""
+"不能将文档 %1$s 回退到存储库版本。\n"
+"意外状况“%2$s”发生。"
+
+#: src/VCBackend.cpp:1333 src/VCBackend.cpp:1469 src/VCBackend.cpp:1506
+#: src/VCBackend.cpp:1560 src/VCBackend.cpp:1949
+msgid "Error: Could not generate logfile."
+msgstr "错误: 不能生成日志。"
+
+#: src/VCBackend.cpp:1349 src/VCBackend.cpp:1965
+msgid ""
+"Error when committing to repository.\n"
+"You have to manually resolve the problem.\n"
+"LyX will reopen the document after you press OK."
+msgstr ""
+"提交到存储库失败。\n"
+"您只能自力更生解决问题。\n"
+"LyX 将在您点击“好”(OK)以后重新打开文件。"
+
+#: src/VCBackend.cpp:1451
+msgid ""
+"Error while acquiring write lock.\n"
+"Another user is most probably editing\n"
+"the current document now!\n"
+"Also check the access to the repository."
+msgstr ""
+"获得写入锁失败。\n"
+"可能有其他用户正在编辑文档。\n"
+"亦请检查是否可以写入存储库。"
+
+#: src/VCBackend.cpp:1457
+msgid ""
+"Error while releasing write lock.\n"
+"Check the access to the repository."
+msgstr ""
+"释放写入锁失败。\n"
+"请检查是否可以写入存储库。"
+
+#: src/VCBackend.cpp:1516
+#, c-format
+msgid ""
+"There were detected changes in the working directory:\n"
+"%1$s\n"
+"\n"
+"In case of file conflict version of the local directory files will be "
+"preferred.\n"
+"\n"
+"Continue?"
+msgstr ""
+"此工作目录中发生了改变:\n"
+"%1$s\n"
+"\n"
+"为防止文件冲突，本地文件的版本将优先采用。\n"
+"\n"
+"要继续吗？"
+
+#: src/VCBackend.cpp:1522 src/VCBackend.cpp:1526
+#: src/frontends/qt/FindAndReplace.cpp:392 src/frontends/qt/GuiPrefs.cpp:1772
+#: src/lyxfind.cpp:316 src/lyxfind.cpp:343 src/lyxfind.cpp:363
+#: src/lyxfind.cpp:712 src/lyxfind.cpp:740
+msgid "&Yes"
+msgstr "是(&Y)"
+
+#: src/VCBackend.cpp:1522 src/VCBackend.cpp:1526
+#: src/frontends/qt/FindAndReplace.cpp:392 src/frontends/qt/GuiPrefs.cpp:1772
+#: src/lyxfind.cpp:316 src/lyxfind.cpp:343 src/lyxfind.cpp:363
+#: src/lyxfind.cpp:712 src/lyxfind.cpp:740
+msgid "&No"
+msgstr "否(&N)"
+
+#: src/VCBackend.cpp:1585
+msgid "SVN File Locking"
+msgstr "SVN 文件锁定"
+
+#: src/VCBackend.cpp:1586 src/VCBackend.cpp:1591
+msgid "Locking property unset."
+msgstr "已解除锁定。"
+
+#: src/VCBackend.cpp:1586 src/VCBackend.cpp:1591
+msgid "Locking property set."
+msgstr "已设为锁定。"
+
+#: src/VCBackend.cpp:1587
+msgid "Do not forget to commit the locking property into the repository."
+msgstr "请勿忘记将锁定属性提交到 (commit) 存储库。"
+
+#: src/VSpace.cpp:215
+msgid "protected"
+msgstr "被保护"
+
+#: src/buffer_funcs.cpp:53
+#, c-format
+msgid ""
+"The document %1$s is already loaded and has unsaved changes.\n"
+"Do you want to abandon your changes and reload the version on disk?"
+msgstr ""
+"文档 %1$s 已被读入且有未保存的修改。\n"
+"\n"
+"您希望放弃修改并载入磁盘上的版本吗？"
+
+#: src/buffer_funcs.cpp:55 src/frontends/qt/GuiView.cpp:4639
+msgid "Reload saved document?"
+msgstr "载入磁盘上文档?"
+
+#: src/buffer_funcs.cpp:56
+msgid "Yes, &Reload"
+msgstr "是，载入(&R)"
+
+#: src/buffer_funcs.cpp:56
+msgid "No, &Keep Changes"
+msgstr "否，保留改变(&K)"
+
+#: src/buffer_funcs.cpp:78
+#, c-format
+msgid "The file %1$s exists but is not readable by the current user."
+msgstr "文件 %1$s 存在，但当前用户不可读。"
+
+#: src/buffer_funcs.cpp:81
+msgid "File not readable!"
+msgstr "无法读取文件！"
+
+#: src/buffer_funcs.cpp:103
+#, c-format
+msgid ""
+"The document %1$s does not yet exist.\n"
+"\n"
+"Do you want to create a new document?"
+msgstr ""
+"文档 %1$s 不存在.\n"
+"\n"
+"您希望创建一个新文档吗?"
+
+#: src/buffer_funcs.cpp:106
+msgid "Create new document?"
+msgstr "创建新文档?"
+
+#: src/buffer_funcs.cpp:107
+#, fuzzy
+msgid "&Yes, Create New Document"
+msgstr "创建新文档?"
+
+#: src/buffer_funcs.cpp:107
+msgid "&No, Do Not Create"
+msgstr "不要创建 (&N)"
+
+#: src/buffer_funcs.cpp:135
+#, c-format
+msgid ""
+"The specified document template\n"
+"%1$s\n"
+"could not be read."
+msgstr ""
+"指定的文档模板\n"
+"%1$s\n"
+"无法被读取."
+
+#: src/buffer_funcs.cpp:137
+msgid "Could not read template"
+msgstr "无法读取文档模板"
+
+#: src/frontends/qt/BulletsModule.cpp:51
+msgid "Standard[[Bullets]]"
+msgstr "标准[[Bullets]]"
+
+#: src/frontends/qt/BulletsModule.cpp:53
+msgid "Dings 1"
+msgstr "符号 1"
+
+#: src/frontends/qt/BulletsModule.cpp:54
+msgid "Dings 2"
+msgstr "符号 2"
+
+#: src/frontends/qt/BulletsModule.cpp:55
+msgid "Dings 3"
+msgstr "符号 3"
+
+#: src/frontends/qt/BulletsModule.cpp:56
+msgid "Dings 4"
+msgstr "符号 4"
+
+#: src/frontends/qt/ButtonController.cpp:95
+msgid "This tab contains invalid input. Please fix!"
+msgstr ""
+
+#: src/frontends/qt/ButtonController.cpp:267
+#: src/frontends/qt/GuiApplication.cpp:2007 src/frontends/qt/GuiCompare.cpp:196
+#: src/frontends/qt/GuiSymbols.cpp:346
+msgid "Cancel"
+msgstr "取消"
+
+#: src/frontends/qt/ButtonController.cpp:269
+#: src/frontends/qt/GuiCompare.cpp:194 src/frontends/qt/GuiDelimiter.cpp:413
+#: src/frontends/qt/GuiSymbols.cpp:348
+msgid "Close"
+msgstr "关闭"
+
+#: src/frontends/qt/CategorizedCombo.cpp:189
+msgid "Unavailable:"
+msgstr "不存在:"
+
+#: src/frontends/qt/CategorizedCombo.cpp:476
+#, c-format
+msgid "Unavailable: %1$s"
+msgstr "不存在: %1$s"
+
+#: src/frontends/qt/CategorizedCombo.cpp:479
+#: src/frontends/qt/CategorizedCombo.cpp:504
+#: src/frontends/qt/CategorizedCombo.cpp:505
+msgid "Uncategorized"
+msgstr "未分类"
+
+#: src/frontends/qt/FileDialog.cpp:207
+msgid "Directories"
+msgstr "目录"
+
+#: src/frontends/qt/FindAndReplace.cpp:288
+msgid "File"
+msgstr "文件"
+
+#: src/frontends/qt/FindAndReplace.cpp:291
+msgid "Master document"
+msgstr "主文档"
+
+#: src/frontends/qt/FindAndReplace.cpp:294
+msgid "Open files"
+msgstr "打开文件"
+
+#: src/frontends/qt/FindAndReplace.cpp:297
+msgid "Manuals"
+msgstr "手册"
+
+#: src/frontends/qt/FindAndReplace.cpp:301
+#, c-format
+msgid ""
+"%1$s: the end was reached while searching forward.\n"
+"Continue searching from the beginning?"
+msgstr ""
+"%1$s: 已经搜索到文件末端\n"
+"从头继续搜索?"
+
+#: src/frontends/qt/FindAndReplace.cpp:304
+#, c-format
+msgid ""
+"%1$s: the beginning was reached while searching backward.\n"
+"Continue searching from the end?"
+msgstr ""
+"%1$s: 已经搜索到文件头端\n"
+"从尾继续搜索?"
+
+#: src/frontends/qt/FindAndReplace.cpp:327
+msgid "Advanced search in progress (press ESC to cancel) . . ."
+msgstr "高级搜索进行中 (按下ESC以取消)..."
+
+#: src/frontends/qt/FindAndReplace.cpp:373
+msgid "Advanced search cancelled by user"
+msgstr "高级搜索被用户取消"
+
+#: src/frontends/qt/FindAndReplace.cpp:391 src/lyxfind.cpp:362
+#: src/lyxfind.cpp:711 src/lyxfind.cpp:739
+msgid "Wrap search?"
+msgstr "要从头开始继续搜索吗?"
+
+#: src/frontends/qt/FindAndReplace.cpp:442
+msgid "Nothing to search"
+msgstr "无搜索结果"
+
+#: src/frontends/qt/FindAndReplace.cpp:530
+msgid "No open document(s) in which to search"
+msgstr "没有已打开的文档可搜索"
+
+#: src/frontends/qt/FindAndReplace.cpp:661
+msgid "Advanced Find and Replace"
+msgstr "高级查找替换"
+
+#: src/frontends/qt/FindAndReplace.cpp:711
+msgid "Find previous occurrence (Shift+Enter, forwards: Enter)"
+msgstr ""
+
+#: src/frontends/qt/FindAndReplace.cpp:712
+#, fuzzy
+msgid "< Rep&lace"
+msgstr "替换(&R)"
+
+#: src/frontends/qt/FindAndReplace.cpp:713
+#, fuzzy
+msgid "Replace and find previous occurrence (Shift+Enter, forwards: Enter)"
+msgstr "替换并查找下一项［回车］"
+
+#: src/frontends/qt/FloatPlacement.cpp:182
+#: src/frontends/qt/GuiDocument.cpp:1178 src/frontends/qt/GuiDocument.cpp:2906
+#: src/frontends/qt/GuiDocument.cpp:2933
+msgid "Class Default"
+msgstr "文档类默认值"
+
+#: src/frontends/qt/FloatPlacement.cpp:184
+#, fuzzy
+msgid "Document Default"
+msgstr "保存为文档缺省设定"
+
+#: src/frontends/qt/FloatPlacement.h:38 src/frontends/qt/GuiDocument.cpp:1839
+msgid "Float Settings"
+msgstr "浮动项设定"
+
+#: src/frontends/qt/GuiAbout.cpp:53
+msgid "ERROR: LyX wasn't able to find the CREDITS file\n"
+msgstr "出错: LyX 无法读取 CREDITS 文件\n"
+
+#: src/frontends/qt/GuiAbout.cpp:54 src/frontends/qt/GuiAbout.cpp:59
+#, fuzzy
+msgid ""
+"Please install correctly to estimate the great\n"
+"amount of work other people have done for the LyX project."
+msgstr "人在 LyX 项目上作出的巨大贡献."
+
+#: src/frontends/qt/GuiAbout.cpp:58
+msgid "ERROR: LyX wasn't able to read the CREDITS file\n"
+msgstr "出错: LyX 无法读取 CREDITS 文件\n"
+
+#: src/frontends/qt/GuiAbout.cpp:97
+msgid "ERROR: LyX wasn't able to find the RELEASE-NOTES file\n"
+msgstr ""
+"出错: LyX 无法读取 RELEASE-NOTES 文件\n"
+"\n"
+
+#: src/frontends/qt/GuiAbout.cpp:98 src/frontends/qt/GuiAbout.cpp:103
+#, fuzzy
+msgid ""
+"Please install correctly to see what has changed\n"
+"for this version of LyX."
+msgstr "请正确安装 LyX 以查看\n"
+
+#: src/frontends/qt/GuiAbout.cpp:102
+msgid "ERROR: LyX wasn't able to read the RELEASE-NOTES file\n"
+msgstr "出错: LyX 无法读取 RELEASE-NOTES 文件\n"
+
+#: src/frontends/qt/GuiAbout.cpp:187
+#, c-format
+msgid ""
+"LyX is Copyright (C) 1995 by Matthias Ettrich,\n"
+"1995--%1$s LyX Team"
+msgstr ""
+"LyX 版权所有 (C) 1995 Matthias Ettrich,\n"
+"1995--%1$s LyX 开发小组"
+
+#: src/frontends/qt/GuiAbout.cpp:195
+msgid ""
+"This program is free software; you can redistribute it and/or modify it "
+"under the terms of the GNU General Public License as published by the Free "
+"Software Foundation; either version 2 of the License, or (at your option) "
+"any later version."
+msgstr ""
+"本程序为自由软件；您可以在 GNU 通用公共许可证 (由自由软件基金会发布，限第 2 "
+"版，或任何兼容的新版本) 条款下重新发布或修改它。"
+
+#: src/frontends/qt/GuiAbout.cpp:201
+msgid ""
+"LyX is distributed in the hope that it will be useful, but WITHOUT ANY "
+"WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS "
+"FOR A PARTICULAR PURPOSE.\n"
+"See the GNU General Public License for more details.\n"
+"You should have received a copy of the GNU General Public License along with "
+"this program; if not, write to the Free Software Foundation, Inc., 51 "
+"Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA."
+msgstr ""
+"发布 LyX 乃是希望其对诸位有用，但绝无任何保证；暗示其可用性或适用于任何特定目"
+"的之保证亦明确排除。\n"
+"请参阅 GNU 通用公共许可证获取详情。\n"
+"本程序应随附一份 GNU 通用公共许可证副本；若未附有，您可以向以下地址索取："
+"Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA "
+"02110-1301, USA."
+
+#: src/frontends/qt/GuiAbout.cpp:256
+msgid "not released yet"
+msgstr "尚未发布"
+
+#: src/frontends/qt/GuiAbout.cpp:261
+#, fuzzy, c-format
+msgid ""
+"Version %1$s\n"
+"(%2$s)"
+msgstr ""
+"LyX 版本 %1$s\n"
+"(%2$s)"
+
+#: src/frontends/qt/GuiAbout.cpp:269
+msgid "Built from git commit hash "
+msgstr "该编译版之 git commit hash 为 "
+
+#: src/frontends/qt/GuiAbout.cpp:282
+#, fuzzy, c-format
+msgid "Qt Version (run-time): %1$s on platform %2$s"
+msgstr "Qt 版本 (运行时): %1$s"
+
+#: src/frontends/qt/GuiAbout.cpp:287
+#, c-format
+msgid "Qt Version (compile-time): %1$s"
+msgstr "Qt 版本 (编译时): %1$s"
+
+#: src/frontends/qt/GuiAbout.cpp:293
+#, fuzzy, c-format
+msgid "OS Version (run-time): %1$s"
+msgstr "Qt 版本 (编译时): %1$s"
+
+#: src/frontends/qt/GuiAbout.cpp:300
+#, c-format
+msgid "Python detected: %1$s"
+msgstr ""
+
+#: src/frontends/qt/GuiAbout.cpp:331
+msgid "About LyX"
+msgstr "关于 LyX"
+
+#: src/frontends/qt/GuiApplication.cpp:784
+msgid "About %1"
+msgstr "关于 %1"
+
+#: src/frontends/qt/GuiApplication.cpp:785 src/frontends/qt/GuiPrefs.cpp:3469
+msgid "Preferences"
+msgstr "首选项"
+
+#: src/frontends/qt/GuiApplication.cpp:786
+msgid "Reconfigure"
+msgstr "重新配置"
+
+#: src/frontends/qt/GuiApplication.cpp:787
+msgid "Restore Defaults"
+msgstr "重置为默认值"
+
+#: src/frontends/qt/GuiApplication.cpp:788
+msgid "Quit %1"
+msgstr "退出 %1"
+
+#: src/frontends/qt/GuiApplication.cpp:789 src/frontends/qt/GuiInclude.cpp:320
+#: src/frontends/qt/GuiInclude.cpp:330 src/frontends/qt/GuiInclude.cpp:335
+msgid "&OK"
+msgstr "确定(&O)"
+
+#: src/frontends/qt/GuiApplication.cpp:791
+#, fuzzy
+msgid "Apply"
+msgstr "应用(&A)"
+
+#: src/frontends/qt/GuiApplication.cpp:792
+msgid "Reset"
+msgstr "重置"
+
+#: src/frontends/qt/GuiApplication.cpp:793
+#, fuzzy
+msgid "Open"
+msgstr "开头语"
+
+#: src/frontends/qt/GuiApplication.cpp:1286
+msgid "Nothing to do"
+msgstr "无操作"
+
+#: src/frontends/qt/GuiApplication.cpp:1292
+msgid "Unknown action"
+msgstr "未知操作"
+
+#: src/frontends/qt/GuiApplication.cpp:1336
+msgid "Command not handled"
+msgstr "无法处理的命令"
+
+#: src/frontends/qt/GuiApplication.cpp:1342
+msgid "Command disabled"
+msgstr "被禁止命令"
+
+#: src/frontends/qt/GuiApplication.cpp:1450
+#, c-format
+msgid "Bad debug value `%1$s'."
+msgstr ""
+
+#: src/frontends/qt/GuiApplication.cpp:1479 src/frontends/qt/GuiView.cpp:2372
+msgid "Command not allowed without a buffer open"
+msgstr "此命令在没有任何缓存打开下不能执行"
+
+#: src/frontends/qt/GuiApplication.cpp:1486
+msgid "the <LFUN-COMMAND> argument of buffer-forall is not valid"
+msgstr "buffer-forall 的 <LFUN-COMMAND> 参数无效"
+
+#: src/frontends/qt/GuiApplication.cpp:1563
+msgid "Wrong focus!"
+msgstr ""
+
+#: src/frontends/qt/GuiApplication.cpp:1697
+msgid "Running configure..."
+msgstr "执行配置程序..."
+
+#: src/frontends/qt/GuiApplication.cpp:1707
+msgid "Reloading configuration..."
+msgstr "读入系统配置..."
+
+#: src/frontends/qt/GuiApplication.cpp:1717
+msgid "System reconfiguration failed"
+msgstr "重配置系统失败"
+
+#: src/frontends/qt/GuiApplication.cpp:1718
+msgid ""
+"The system reconfiguration has failed.\n"
+"Default textclass is used but LyX may\n"
+"not be able to work properly.\n"
+"Please reconfigure again if needed."
+msgstr ""
+"重新配置系统失败。\n"
+"LyX 将使用默认文档类，\n"
+"但可能无法正常工作。\n"
+"若需要，请再次重新配置。"
+
+#: src/frontends/qt/GuiApplication.cpp:1723
+msgid "System reconfigured"
+msgstr "重配置系统完毕"
+
+#: src/frontends/qt/GuiApplication.cpp:1724
+msgid ""
+"The system has been reconfigured.\n"
+"You need to restart LyX to make use of any\n"
+"updated document class specifications."
+msgstr ""
+"重配置系统完毕。\n"
+"您必须重启动 LyX，\n"
+"以便使用更新的文档类列表."
+
+#: src/frontends/qt/GuiApplication.cpp:1805
+msgid "Exiting."
+msgstr "退出。"
+
+#: src/frontends/qt/GuiApplication.cpp:1901
+#, c-format
+msgid "Opening help file %1$s..."
+msgstr "打开帮助文件 %1$s..."
+
+#: src/frontends/qt/GuiApplication.cpp:1915
+msgid "Wrong argument. Must be 'examples' or 'templates'."
+msgstr ""
+
+#: src/frontends/qt/GuiApplication.cpp:1929
+#, fuzzy
+msgid "Syntax: set-color <lyx_name> <x11_name> <x11_darkname>"
+msgstr "语法: set-color <lyx_name> <x11_name>"
+
+#: src/frontends/qt/GuiApplication.cpp:1949
+#, c-format
+msgid "Set-color \"%1$s\" failed - color is undefined or may not be redefined"
+msgstr "设置颜色 \"%1$s\" 失败 - 未定义或不能重定义颜色"
+
+#: src/frontends/qt/GuiApplication.cpp:2054
+#, c-format
+msgid "Cannot iterate more than %1$d times"
+msgstr "不能迭代多于 %1$d 次"
+
+#: src/frontends/qt/GuiApplication.cpp:2154
+#, c-format
+msgid "Applied \"%1$s\" to %2$d buffer(s)"
+msgstr "应用“%1$s”到 %2$d 处缓存"
+
+#: src/frontends/qt/GuiApplication.cpp:2240
+#, c-format
+msgid "Document defaults saved in %1$s"
+msgstr "文档缺省设置保存至 %1$s"
+
+#: src/frontends/qt/GuiApplication.cpp:2244
+msgid "Unable to save document defaults"
+msgstr "无法保存文档缺省设置"
+
+#: src/frontends/qt/GuiApplication.cpp:2478
+#: src/frontends/qt/GuiApplication.cpp:2493
+msgid "Unknown function."
+msgstr "未知函数。"
+
+#: src/frontends/qt/GuiApplication.cpp:3025
+msgid "The current document was closed."
+msgstr "当前文档已关闭。"
+
+#: src/frontends/qt/GuiApplication.cpp:3035
+msgid ""
+"LyX has caught an exception, it will now attempt to save all unsaved "
+"documents and exit.\n"
+"\n"
+"Exception: "
+msgstr "LyX 发生异常，将尝试保存所有文档并退出。异常详情: "
+
+#: src/frontends/qt/GuiApplication.cpp:3039
+#: src/frontends/qt/GuiApplication.cpp:3045
+msgid "Software exception Detected"
+msgstr "检测到软件异常"
+
+#: src/frontends/qt/GuiApplication.cpp:3043
+msgid ""
+"LyX has caught some really weird exception, it will now attempt to save all "
+"unsaved documents and exit."
+msgstr "LyX 出现异常，将尝试保存所有文档并退出。"
+
+#: src/frontends/qt/GuiApplication.cpp:3349
+#: src/frontends/qt/GuiApplication.cpp:3361
+msgid "Could not find UI definition file"
+msgstr "无法读取用户界面定义文件"
+
+#: src/frontends/qt/GuiApplication.cpp:3350
+#, c-format
+msgid ""
+"Error while reading the included file\n"
+"%1$s\n"
+"Please check your installation."
+msgstr ""
+"读取文件出错\n"
+"%1$s.\n"
+"请检查您的安装是否完全。"
+
+#: src/frontends/qt/GuiApplication.cpp:3356
+msgid "Could not find default UI file"
+msgstr "无法读取默认用户界面文件"
+
+#: src/frontends/qt/GuiApplication.cpp:3357
+msgid ""
+"LyX could not find the default UI file!\n"
+"Please check your installation."
+msgstr ""
+"LyX 不能找到默认的用户界面文件！\n"
+"请检查您的安装是否完全。"
+
+#: src/frontends/qt/GuiApplication.cpp:3362
+#, c-format
+msgid ""
+"Error while reading the configuration file\n"
+"%1$s\n"
+"Falling back to default.\n"
+"Please look under Tools>Preferences>User Interface and\n"
+"check which User Interface file you are using."
+msgstr ""
+"读取配置文件\n"
+"%1$s\n"
+"时出错。\n"
+"将使用默认配置。\n"
+"请打开文档>配置>用户界面，检查所用的配置文件。"
+
+#: src/frontends/qt/GuiBibitem.cpp:60
+#, fuzzy
+msgid "Author &Names:"
+msgstr "作者姓名"
+
+#: src/frontends/qt/GuiBibitem.cpp:62
+msgid ""
+"Insert the author name(s) for the author-year reference here. If you use an "
+"abbreviated list (with `et al.'), the full list can go below."
+msgstr ""
+
+#: src/frontends/qt/GuiBibitem.cpp:66
+#, fuzzy
+msgid ""
+"Pass content of the `Author', `Year' and `All Authors' fields literally to "
+"LaTeX. Check this if you want to enter LaTeX code."
+msgstr ""
+"“符号”和“描述”的内容将原原本本地传递给 LaTeX。如果您想使用 LaTeX 代码，请选中"
+"此项。"
+
+#: src/frontends/qt/GuiBibitem.h:36
+msgid "Bibliography Item Settings"
+msgstr "文献引用项设定"
+
+#: src/frontends/qt/GuiBibtex.cpp:58 src/frontends/qt/GuiBibtex.cpp:382
+msgid "BibTeX Bibliography"
+msgstr "BibTeX 参考文献"
+
+#: src/frontends/qt/GuiBibtex.cpp:69
+#, fuzzy
+msgid "All avail. databases"
+msgstr "所有可用文献"
+
+#: src/frontends/qt/GuiBibtex.cpp:114
+msgid ""
+"This list consists of all databases that are indexed by LaTeX and thus are "
+"found without a file path. This is usually everything in the bib/ "
+"subdirectory of LaTeX's texmf tree. If you want to reuse your own database, "
+"this is the place you should store it."
+msgstr ""
+"此列表包括了所有被 LaTeX 索引的数据库，故无文件路径。通常来说，这包含 LaTeX "
+"的 texmf 树下 bib/ 子目录的所有内容。如果您想要重用自己的数据库，您应该将其存"
+"放在这里。"
+
+#: src/frontends/qt/GuiBibtex.cpp:130 src/frontends/qt/GuiBibtex.cpp:341
+#, fuzzy
+msgid "Document Encoding"
+msgstr "文档处理"
+
+#: src/frontends/qt/GuiBibtex.cpp:312
+#, fuzzy
+msgid "Database"
+msgstr "数据库:"
+
+#: src/frontends/qt/GuiBibtex.cpp:313
+#, fuzzy
+msgid "File Encoding"
+msgstr "文件处理"
+
+#: src/frontends/qt/GuiBibtex.cpp:320
+#, fuzzy
+msgid "General E&ncoding:"
+msgstr "通用标点"
+
+#: src/frontends/qt/GuiBibtex.cpp:321
+msgid ""
+"If your bibliography databases use a different encoding than the LyX "
+"document, specify it here. If indivivual databases have different encodings, "
+"you can set it in the list above."
+msgstr ""
+
+#: src/frontends/qt/GuiBibtex.cpp:340
+#, fuzzy
+msgid "General Encoding"
+msgstr "通用标点"
+
+#: src/frontends/qt/GuiBibtex.cpp:347
+msgid ""
+"If this bibliography database uses a different encoding than specified "
+"below, set it here"
+msgstr ""
+
+#: src/frontends/qt/GuiBibtex.cpp:380
+msgid "Biblatex Bibliography"
+msgstr "BibLaTeX 参考文献"
+
+#: src/frontends/qt/GuiBibtex.cpp:400 src/insets/InsetBibtex.cpp:236
+#, fuzzy
+msgid "all reference units"
+msgstr "所有参考文献"
+
+#: src/frontends/qt/GuiBibtex.cpp:496 src/frontends/qt/GuiBibtex.cpp:506
+#: src/frontends/qt/GuiCompare.cpp:166 src/frontends/qt/GuiCompare.cpp:170
+#: src/frontends/qt/GuiDocument.cpp:3077 src/frontends/qt/GuiExternal.cpp:691
+#: src/frontends/qt/GuiGraphics.cpp:841 src/frontends/qt/GuiInclude.cpp:382
+#: src/frontends/qt/GuiLyXFiles.cpp:365 src/frontends/qt/GuiLyXFiles.cpp:371
+#: src/frontends/qt/GuiView.cpp:2793 src/frontends/qt/GuiView.cpp:2852
+#: src/frontends/qt/GuiView.cpp:3010 src/frontends/qt/GuiView.cpp:3144
+#: src/frontends/qt/GuiView.cpp:3264 src/frontends/qt/GuiView.cpp:3384
+#, fuzzy
+msgid "D&ocuments"
+msgstr "文档"
+
+#: src/frontends/qt/GuiBibtex.cpp:498
+msgid "BibTeX Databases (*.bib)"
+msgstr "BibTeX数据库(*.bib)"
+
+#: src/frontends/qt/GuiBibtex.cpp:500
+msgid "Select a BibTeX database to add"
+msgstr "选择一个BibTeX数据库"
+
+#: src/frontends/qt/GuiBibtex.cpp:508
+msgid "BibTeX Styles (*.bst)"
+msgstr "BibTeX 样式 (*.bst)"
+
+#: src/frontends/qt/GuiBibtex.cpp:510
+msgid "Select a BibTeX style"
+msgstr "选择一个BibTeX样式"
+
+#: src/frontends/qt/GuiBox.cpp:54
+msgid "No frame"
+msgstr "无边框"
+
+#: src/frontends/qt/GuiBox.cpp:54
+msgid "Simple rectangular frame"
+msgstr "简单矩形边框"
+
+#: src/frontends/qt/GuiBox.cpp:55
+msgid "Oval frame, thin"
+msgstr "细椭圆框"
+
+#: src/frontends/qt/GuiBox.cpp:55
+msgid "Oval frame, thick"
+msgstr "粗椭圆框"
+
+#: src/frontends/qt/GuiBox.cpp:56
+msgid "Drop shadow"
+msgstr "阴影"
+
+#: src/frontends/qt/GuiBox.cpp:56
+msgid "Shaded background"
+msgstr "带阴影背景"
+
+#: src/frontends/qt/GuiBox.cpp:57
+msgid "Double rectangular frame"
+msgstr "双矩形边框"
+
+#: src/frontends/qt/GuiBox.cpp:70
+msgid "Depth"
+msgstr "深度"
+
+#: src/frontends/qt/GuiBox.cpp:71
+msgid "Total Height"
+msgstr "总高度"
+
+#: src/frontends/qt/GuiBox.cpp:402 src/frontends/qt/GuiBox.cpp:610
+#: src/insets/InsetBox.cpp:143
+msgid "Makebox"
+msgstr "Makebox"
+
+#: src/frontends/qt/GuiBox.h:43
+msgid "Box Settings"
+msgstr "边框设定"
+
+#: src/frontends/qt/GuiBranch.cpp:69
+#, fuzzy, c-format
+msgid "%1$s[[branch]] (%2$s)[[master]]"
+msgstr "%1$s[[name]] (%2$s[[email]])"
+
+#: src/frontends/qt/GuiBranch.cpp:70
+#, fuzzy
+msgid "master"
+msgstr "粘贴"
+
+#: src/frontends/qt/GuiBranch.h:35
+msgid "Branch Settings"
+msgstr "分支设定"
+
+#: src/frontends/qt/GuiBranches.cpp:53 src/insets/Inset.cpp:115
+msgid "Branch"
+msgstr "分支"
+
+#: src/frontends/qt/GuiBranches.cpp:54
+msgid "Activated"
+msgstr "已激活"
+
+#: src/frontends/qt/GuiBranches.cpp:56
+msgid "Filename Suffix"
+msgstr "文件名后缀"
+
+#: src/frontends/qt/GuiBranches.cpp:135 src/frontends/qt/GuiBranches.cpp:149
+#: src/frontends/qt/GuiDocument.cpp:3516 src/frontends/qt/GuiDocument.cpp:4842
+#: src/frontends/qt/GuiProgressView.cpp:148
+#: src/frontends/qt/GuiProgressView.cpp:162
+#: src/frontends/qt/GuiProgressView.cpp:184
+msgid "Yes"
+msgstr "是"
+
+#: src/frontends/qt/GuiBranches.cpp:135 src/frontends/qt/GuiBranches.cpp:149
+#: src/frontends/qt/GuiDocument.cpp:3515 src/frontends/qt/GuiDocument.cpp:4154
+#: src/frontends/qt/GuiDocument.cpp:4841
+#: src/frontends/qt/GuiProgressView.cpp:114
+#: src/frontends/qt/GuiProgressView.cpp:147
+#: src/frontends/qt/GuiProgressView.cpp:184
+msgid "No"
+msgstr "否"
+
+#: src/frontends/qt/GuiBranches.cpp:216
+msgid "Enter new branch name"
+msgstr "输入新分支名"
+
+#: src/frontends/qt/GuiBranches.cpp:222
+#, c-format
+msgid ""
+"A branch with the name \"%1$s\" already exists.\n"
+"Do you want to merge branch \"%2$s\" with that one?"
+msgstr ""
+"分支“%1$s”已经存在。\n"
+"您要把分支“%2$s”合并进来吗？"
+
+#: src/frontends/qt/GuiBranches.cpp:226
+msgid "&Merge"
+msgstr "合并(&M)"
+
+#: src/frontends/qt/GuiBranches.cpp:234 src/frontends/qt/GuiIndices.cpp:243
+msgid "Renaming failed"
+msgstr "重命名失败"
+
+#: src/frontends/qt/GuiBranches.cpp:235
+msgid "The branch could not be renamed."
+msgstr "无法重命名该分支。"
+
+#: src/frontends/qt/GuiChanges.cpp:36
+msgid "Merge Changes"
+msgstr "合并改变"
+
+#: src/frontends/qt/GuiChanges.cpp:70
+#, fuzzy
+msgid "Inserted by %1"
+msgstr "插入框"
+
+#: src/frontends/qt/GuiChanges.cpp:71
+#, fuzzy
+msgid "Deleted by %1"
+msgstr "删除快捷键(&D)"
+
+#: src/frontends/qt/GuiChanges.cpp:84
+msgid " on[[date]] %1"
+msgstr ""
+
+#: src/frontends/qt/GuiChanges.cpp:86
+#, fuzzy
+msgid "Inserted on %1"
+msgstr "插入框"
+
+#: src/frontends/qt/GuiChanges.cpp:87
+#, fuzzy
+msgid "Deleted on %1"
+msgstr "删除行"
+
+#: src/frontends/qt/GuiCharacter.cpp:50 src/frontends/qt/GuiCharacter.cpp:63
+#: src/frontends/qt/GuiCharacter.cpp:84 src/frontends/qt/GuiCharacter.cpp:97
+#: src/frontends/qt/GuiCharacter.cpp:135 src/frontends/qt/GuiCharacter.cpp:146
+#: src/frontends/qt/GuiCharacter.cpp:189 src/frontends/qt/GuiCharacter.cpp:242
+msgid "No change"
+msgstr "无改变"
+
+#: src/frontends/qt/GuiCharacter.cpp:55
+msgid "Small Caps"
+msgstr "小号大写字体"
+
+#: src/frontends/qt/GuiCharacter.cpp:86
+msgid "(Without)[[underlining]]"
+msgstr "(无)"
+
+#: src/frontends/qt/GuiCharacter.cpp:87
+msgid "Single[[underlining]]"
+msgstr "单线"
+
+#: src/frontends/qt/GuiCharacter.cpp:88
+#, fuzzy
+msgid "Double[[underlining]]"
+msgstr "双下划线 %1$s, "
+
+#: src/frontends/qt/GuiCharacter.cpp:89
+msgid "Wavy"
+msgstr "波浪线"
+
+#: src/frontends/qt/GuiCharacter.cpp:99
+msgid "(Without)[[strikethrough]]"
+msgstr "(无)"
+
+#: src/frontends/qt/GuiCharacter.cpp:100
+msgid "Single[[strikethrough]]"
+msgstr "单线"
+
+#: src/frontends/qt/GuiCharacter.cpp:101
+msgid "With /"
+msgstr "斜划线"
+
+#: src/frontends/qt/GuiCharacter.cpp:191
+msgid "(Without)[[color]]"
+msgstr "(无)"
+
+#: src/frontends/qt/GuiCharacter.cpp:208
+#, fuzzy
+msgid "Text Properties"
+msgstr "字体属性"
+
+#: src/frontends/qt/GuiCharacter.cpp:274
+msgid "Reset All To &Default"
+msgstr "全部重置为缺省值(&D)"
+
+#: src/frontends/qt/GuiCharacter.cpp:275
+msgid "Reset All To No Chan&ge"
+msgstr "拒绝所有修改(&G)"
+
+#: src/frontends/qt/GuiCharacter.cpp:280
+msgid "&Reset All Fields"
+msgstr "重置所有字段(&R)"
+
+#: src/frontends/qt/GuiCitation.cpp:94
+msgid "Citation"
+msgstr "引用"
+
+#: src/frontends/qt/GuiCitation.cpp:102
+msgid "All avail. citations"
+msgstr "所有可用文献"
+
+#: src/frontends/qt/GuiCitation.cpp:108
+msgid "Regular e&xpression"
+msgstr "正则表达式(&X)"
+
+#: src/frontends/qt/GuiCitation.cpp:110
+msgid "Case se&nsitive"
+msgstr "区分大小写(&N)"
+
+#: src/frontends/qt/GuiCitation.cpp:112
+msgid "Search as you &type"
+msgstr "输入时搜索(&T)"
+
+#: src/frontends/qt/GuiCitation.cpp:167
+msgid ""
+"Ordered list of all cited references.\n"
+"You can reorder, add and remove references with the buttons on the left."
+msgstr ""
+"此为所有已使用的引用的有序列表。\n"
+"您可以用左侧对按钮重新排序或增删引用。"
+
+#: src/frontends/qt/GuiCitation.cpp:284
+msgid "General text befo&re:"
+msgstr "之前文本(&R):"
+
+#: src/frontends/qt/GuiCitation.cpp:285 src/frontends/qt/GuiCitation.cpp:289
+msgid "General &text after:"
+msgstr "之后文本(&T):"
+
+#: src/frontends/qt/GuiCitation.cpp:286
+msgid ""
+"Text that precedes the whole reference list. For text that precedes "
+"individual items, double-click on the respective entry above."
+msgstr "引用列表之前的文本。对于特定条目之前的文本，请双击相应的条目。"
+
+#: src/frontends/qt/GuiCitation.cpp:290
+msgid ""
+"Text that follows the whole reference list. For text that follows individual "
+"items, double-click on the respective entry above."
+msgstr "引用列表之后的文本。对于特定条目之后的文本，请双击相应的条目。"
+
+#: src/frontends/qt/GuiCitation.cpp:296
+msgid "Text that precedes the reference (e.g., \"cf.\")"
+msgstr "参考文献前的前缀 (如“cf.”)"
+
+#: src/frontends/qt/GuiCitation.cpp:302
+msgid "Text that follows the reference (e.g., pages)"
+msgstr "参考文献后的后缀 (如“pages”)"
+
+#: src/frontends/qt/GuiCitation.cpp:310
+msgid "Force upper case in names (\"Del Piero\", not \"del Piero\")."
+msgstr "专有名词永远首字大写 (如\"Del Piero\", 而非\"del Piero\")。"
+
+#: src/frontends/qt/GuiCitation.cpp:345
+msgid "Always list all authors (rather than using \"et al.\")"
+msgstr "总是列出所有作者 (而非使用“等”或“et al.”)"
+
+#: src/frontends/qt/GuiCitation.cpp:351
+msgid "All references available for citing."
+msgstr "全部可使用的参考文献。"
+
+#: src/frontends/qt/GuiCitation.cpp:353
+msgid ""
+"All references available for citing.\n"
+"To add the selected one, hit Add, press Enter or double-click.\n"
+"Hit Ctrl-Enter to add and close the dialog."
+msgstr ""
+"全部可使用的参考文献。\n"
+"想添加已选中的参考文献，请点击“添加”、按 Enter 键或双击鼠标。\n"
+"按 Ctrl+Enter 可在添加后自动关闭对话框。"
+
+#: src/frontends/qt/GuiCitation.cpp:430
+msgid "Keys"
+msgstr "关键字"
+
+#: src/frontends/qt/GuiCitation.cpp:471
+msgid "Displays a sketchy preview if a citation is selected above"
+msgstr "如果在上面选中了某个引用，则显示粗略预览"
+
+#: src/frontends/qt/GuiCitation.cpp:475
+msgid "Sketchy preview of the selected citation"
+msgstr "选定引用的粗略预览"
+
+#: src/frontends/qt/GuiCitation.cpp:586
+msgid "Enter string to filter the list of available citations"
+msgstr "输入字符串来过滤引用列表"
+
+#: src/frontends/qt/GuiCitation.cpp:587
+msgid ""
+"Enter string to filter the list of available citations and press <Enter>"
+msgstr "输入字符串来过滤引用列表，然后按回车键"
+
+#: src/frontends/qt/GuiCitation.cpp:588
+msgid ""
+"\n"
+"The down arrow key will get you into the list of filtered citations."
+msgstr ""
+
+#: src/frontends/qt/GuiCitation.cpp:652
+msgid "Text before"
+msgstr "之前文字"
+
+#: src/frontends/qt/GuiCitation.cpp:653
+msgid "Cite key"
+msgstr "引用关键字"
+
+#: src/frontends/qt/GuiCitation.cpp:654
+msgid "Text after"
+msgstr "之后文字"
+
+#: src/frontends/qt/GuiClipboard.cpp:179
+msgid "LinkBack PDF"
+msgstr "LinkBack PDF"
+
+#: src/frontends/qt/GuiClipboard.cpp:182
+msgid "JPEG"
+msgstr "JPEG"
+
+#: src/frontends/qt/GuiClipboard.cpp:191
+msgid "pasted"
+msgstr "已粘贴"
+
+#: src/frontends/qt/GuiClipboard.cpp:200
+#, c-format
+msgid "%1$s Files"
+msgstr "%1$s 文件"
+
+#: src/frontends/qt/GuiClipboard.cpp:210
+msgid "Choose a filename to save the pasted graphic as"
+msgstr "选择图形另存为文件名"
+
+#: src/frontends/qt/GuiClipboard.cpp:220 src/frontends/qt/GuiView.cpp:2870
+#: src/frontends/qt/GuiView.cpp:3029 src/frontends/qt/GuiView.cpp:3045
+#: src/frontends/qt/GuiView.cpp:3057 src/frontends/qt/GuiView.cpp:3074
+#: src/frontends/qt/GuiView.cpp:3159 src/frontends/qt/GuiView.cpp:4611
+msgid "Canceled."
+msgstr "已取消。"
+
+#: src/frontends/qt/GuiClipboard.cpp:250
+msgid "Overwrite external file?"
+msgstr "覆盖外部文件吗？"
+
+#: src/frontends/qt/GuiClipboard.cpp:251
+#, c-format
+msgid "File %1$s already exists, do you want to overwrite it?"
+msgstr ""
+"文件 %1$s 已经存在。\n"
+"您要覆盖它吗？"
+
+#: src/frontends/qt/GuiCommandBuffer.cpp:116
+msgid "List of previous commands"
+msgstr "历史命令列表"
+
+#: src/frontends/qt/GuiCommandBuffer.cpp:120
+msgid "Next command"
+msgstr "下一命令"
+
+#: src/frontends/qt/GuiCompare.cpp:47
+msgid "Compare LyX files"
+msgstr "比较 LyX 文件"
+
+#: src/frontends/qt/GuiCompare.cpp:158
+msgid "Select document"
+msgstr "选择文档"
+
+#: src/frontends/qt/GuiCompare.cpp:160 src/frontends/qt/GuiLyXFiles.cpp:364
+#: src/frontends/qt/GuiView.cpp:2797 src/frontends/qt/GuiView.cpp:2856
+#: src/frontends/qt/GuiView.cpp:3148 src/frontends/qt/GuiView.cpp:3274
+msgid "LyX Documents (*.lyx)"
+msgstr "LyX 文档 (*.lyx)"
+
+#: src/frontends/qt/GuiCompare.cpp:202
+msgid "Error while comparing documents."
+msgstr "比较文件时出错。"
+
+#: src/frontends/qt/GuiCompare.cpp:221
+msgid "Aborted"
+msgstr "放弃"
+
+#: src/frontends/qt/GuiCompare.cpp:233
+msgid "Finished"
+msgstr "完成"
+
+#: src/frontends/qt/GuiCompare.cpp:267
+msgid "Aborting process..."
+msgstr "取消中..."
+
+#: src/frontends/qt/GuiCompare.cpp:318
+msgid "differences"
+msgstr "差异"
+
+#: src/frontends/qt/GuiCompare.cpp:399
+#, fuzzy
+msgid "Current Author"
+msgstr "当前词"
+
+#: src/frontends/qt/GuiCompare.cpp:402
+#, fuzzy
+msgid "Document Comparison"
+msgstr "文档格式(&D)"
+
+#: src/frontends/qt/GuiCompareHistory.cpp:38
+msgid "Compare different revisions"
+msgstr "比较不同版本"
+
+#: src/frontends/qt/GuiCounter.h:38
+#, fuzzy
+msgid "Counters"
+msgstr "国家"
+
+#: src/frontends/qt/GuiDelimiter.cpp:63
+msgid "big[[delimiter size]]"
+msgstr "big[[delimiter size]]"
+
+#: src/frontends/qt/GuiDelimiter.cpp:64
+msgid "Big[[delimiter size]]"
+msgstr "Big[[delimiter size]]"
+
+#: src/frontends/qt/GuiDelimiter.cpp:65
+msgid "bigg[[delimiter size]]"
+msgstr "bigg[[delimiter size]]"
+
+#: src/frontends/qt/GuiDelimiter.cpp:66
+msgid "Bigg[[delimiter size]]"
+msgstr "Bigg[[delimiter size]]"
+
+#: src/frontends/qt/GuiDelimiter.cpp:215
+msgid "Math Delimiter"
+msgstr "Math Delimiter"
+
+#: src/frontends/qt/GuiDelimiter.cpp:272 src/frontends/qt/GuiDelimiter.cpp:275
+msgid "(None)"
+msgstr "(无)"
+
+#: src/frontends/qt/GuiDelimiter.cpp:273 src/frontends/qt/GuiDelimiter.cpp:276
+#, fuzzy
+msgid "No Delimiter"
+msgstr "Math Delimiter"
+
+#: src/frontends/qt/GuiDelimiter.cpp:281
+msgid "Variable"
+msgstr "变量"
+
+#: src/frontends/qt/GuiDocument.cpp:228
+msgid "Module not found!"
+msgstr "找不到模块！"
+
+#: src/frontends/qt/GuiDocument.cpp:623 src/frontends/qt/GuiDocument.cpp:803
+msgid "&End Edit"
+msgstr "结束编辑(&E)"
+
+#: src/frontends/qt/GuiDocument.cpp:740
+msgid "Layout is valid!"
+msgstr "布局是有效的。"
+
+#: src/frontends/qt/GuiDocument.cpp:741
+msgid "Layout is invalid!"
+msgstr "布局不存在！"
+
+#: src/frontends/qt/GuiDocument.cpp:753
+msgid "Conversion to current format impossible!"
+msgstr "不能转换到当前格式。"
+
+#: src/frontends/qt/GuiDocument.cpp:754
+msgid "Conversion to current stable format impossible."
+msgstr "不能转换到当前稳定格式。"
+
+#: src/frontends/qt/GuiDocument.cpp:759
+msgid "Convert to current format"
+msgstr "转换到当前格式"
+
+#: src/frontends/qt/GuiDocument.cpp:902
+#, fuzzy
+msgid "Small Skip"
+msgstr "SmallSkip (小间距)"
+
+#: src/frontends/qt/GuiDocument.cpp:903
+#, fuzzy
+msgid "Medium Skip"
+msgstr "中间隔"
+
+#: src/frontends/qt/GuiDocument.cpp:904
+#, fuzzy
+msgid "Big Skip"
+msgstr "BigSkip (大间距)"
+
+#: src/frontends/qt/GuiDocument.cpp:916 src/frontends/qt/GuiDocument.cpp:918
+#: src/frontends/qt/GuiDocument.cpp:1828
+msgid "Text Layout"
+msgstr "文本布局"
+
+#: src/frontends/qt/GuiDocument.cpp:944 src/frontends/qt/GuiInclude.cpp:52
+msgid "Child Document"
+msgstr "子文档"
+
+#: src/frontends/qt/GuiDocument.cpp:945
+msgid "Include to Output"
+msgstr ""
+
+#: src/frontends/qt/GuiDocument.cpp:1024
+msgid "Unicode (utf8)"
+msgstr "Unicode (utf8)"
+
+#: src/frontends/qt/GuiDocument.cpp:1025
+msgid "Traditional (auto-selected)"
+msgstr ""
+
+#: src/frontends/qt/GuiDocument.cpp:1028
+#, fuzzy
+msgid "Select Unicode (utf8) encoding."
+msgstr "Unicode (utf8)"
+
+#: src/frontends/qt/GuiDocument.cpp:1030
+msgid "Use language-dependent traditional encodings."
+msgstr ""
+
+#: src/frontends/qt/GuiDocument.cpp:1032
+#, fuzzy
+msgid "Select a custom, document-wide encoding."
+msgstr "选择一个文件目录"
+
+#: src/frontends/qt/GuiDocument.cpp:1041
+msgid "Standard Unicode support by the ``inputenc'' package."
+msgstr ""
+
+#: src/frontends/qt/GuiDocument.cpp:1044
+msgid ""
+"Use UTF-8 'as-is': do not load any supporting packages, do not convert any "
+"characters to LaTeX macros. For use with non-TeX fonts (XeTeX/LuaTeX) or "
+"custom preamble code."
+msgstr ""
+
+#: src/frontends/qt/GuiDocument.cpp:1049
+msgid ""
+"Load ``inputenc'' with option 'utf8x' for extended Unicode support by the "
+"``ucs'' package."
+msgstr ""
+
+#: src/frontends/qt/GuiDocument.cpp:1053
+msgid "Language Default (no inputenc)"
+msgstr "语言默认编码 (no inputenc)"
+
+#: src/frontends/qt/GuiDocument.cpp:1055
+msgid ""
+"Use the traditional default encoding of the text language. Switch encoding "
+"if a text part is set to a language with different default."
+msgstr ""
+
+#: src/frontends/qt/GuiDocument.cpp:1059
+msgid ""
+"Do not load the 'inputenc' package. Switch encoding if required but do not "
+"write input encoding switch commands to the source."
+msgstr ""
+
+#: src/frontends/qt/GuiDocument.cpp:1173
+msgid "10"
+msgstr "10"
+
+#: src/frontends/qt/GuiDocument.cpp:1174
+msgid "11"
+msgstr "11"
+
+#: src/frontends/qt/GuiDocument.cpp:1175
+msgid "12"
+msgstr "12"
+
+#: src/frontends/qt/GuiDocument.cpp:1177
+#, fuzzy
+msgid "Automatic[[encoding]]"
+msgstr "自动"
+
+#: src/frontends/qt/GuiDocument.cpp:1187
+msgid ""
+"Use OpenType and TrueType fonts directly (requires XeTeX or LuaTeX)\n"
+"You need to install the package \"fontspec\" to use this feature"
+msgstr ""
+"直接使用 OpenType 和 TrueType 字体 (需要 XeTeX 或 LuaTeX) \n"
+"使用该特性需要安装 fontspec 包"
+
+#: src/frontends/qt/GuiDocument.cpp:1219
+msgid "empty"
+msgstr "空"
+
+#: src/frontends/qt/GuiDocument.cpp:1220
+msgid "plain"
+msgstr "只有页码"
+
+#: src/frontends/qt/GuiDocument.cpp:1221
+msgid "headings"
+msgstr "每页都有"
+
+#: src/frontends/qt/GuiDocument.cpp:1222
+msgid "fancy"
+msgstr "美化的 (fancyhdr)"
+
+#: src/frontends/qt/GuiDocument.cpp:1233
+msgid "US letter"
+msgstr "US letter"
+
+#: src/frontends/qt/GuiDocument.cpp:1234
+msgid "US legal"
+msgstr "US legal"
+
+#: src/frontends/qt/GuiDocument.cpp:1235
+msgid "US executive"
+msgstr "US executive"
+
+#: src/frontends/qt/GuiDocument.cpp:1236
+msgid "A0"
+msgstr "A0"
+
+#: src/frontends/qt/GuiDocument.cpp:1237
+msgid "A1"
+msgstr "A1"
+
+#: src/frontends/qt/GuiDocument.cpp:1238
+msgid "A2"
+msgstr "A2"
+
+#: src/frontends/qt/GuiDocument.cpp:1239
+msgid "A3"
+msgstr "A3"
+
+#: src/frontends/qt/GuiDocument.cpp:1240
+msgid "A4"
+msgstr "A4"
+
+#: src/frontends/qt/GuiDocument.cpp:1241
+msgid "A5"
+msgstr "A5"
+
+#: src/frontends/qt/GuiDocument.cpp:1242
+msgid "A6"
+msgstr "A6"
+
+#: src/frontends/qt/GuiDocument.cpp:1243
+msgid "B0"
+msgstr "B0"
+
+#: src/frontends/qt/GuiDocument.cpp:1244
+msgid "B1"
+msgstr "B1"
+
+#: src/frontends/qt/GuiDocument.cpp:1245
+msgid "B2"
+msgstr "B2"
+
+#: src/frontends/qt/GuiDocument.cpp:1246
+msgid "B3"
+msgstr "B3"
+
+#: src/frontends/qt/GuiDocument.cpp:1247
+msgid "B4"
+msgstr "B4"
+
+#: src/frontends/qt/GuiDocument.cpp:1248
+msgid "B5"
+msgstr "B5"
+
+#: src/frontends/qt/GuiDocument.cpp:1249
+msgid "B6"
+msgstr "B6"
+
+#: src/frontends/qt/GuiDocument.cpp:1250
+msgid "C0"
+msgstr "C0"
+
+#: src/frontends/qt/GuiDocument.cpp:1251
+msgid "C1"
+msgstr "C1"
+
+#: src/frontends/qt/GuiDocument.cpp:1252
+msgid "C2"
+msgstr "C2"
+
+#: src/frontends/qt/GuiDocument.cpp:1253
+msgid "C3"
+msgstr "C3"
+
+#: src/frontends/qt/GuiDocument.cpp:1254
+msgid "C4"
+msgstr "C4"
+
+#: src/frontends/qt/GuiDocument.cpp:1255
+msgid "C5"
+msgstr "C5"
+
+#: src/frontends/qt/GuiDocument.cpp:1256
+msgid "C6"
+msgstr "C6"
+
+#: src/frontends/qt/GuiDocument.cpp:1257
+msgid "JIS B0"
+msgstr "JIS B0"
+
+#: src/frontends/qt/GuiDocument.cpp:1258
+msgid "JIS B1"
+msgstr "JIS B1"
+
+#: src/frontends/qt/GuiDocument.cpp:1259
+msgid "JIS B2"
+msgstr "JIS B2"
+
+#: src/frontends/qt/GuiDocument.cpp:1260
+msgid "JIS B3"
+msgstr "JIS B3"
+
+#: src/frontends/qt/GuiDocument.cpp:1261
+msgid "JIS B4"
+msgstr "JIS B4"
+
+#: src/frontends/qt/GuiDocument.cpp:1262
+msgid "JIS B5"
+msgstr "JIS B5"
+
+#: src/frontends/qt/GuiDocument.cpp:1263
+msgid "JIS B6"
+msgstr "JIS B6"
+
+#: src/frontends/qt/GuiDocument.cpp:1331 src/frontends/qt/GuiDocument.cpp:1335
+#: src/frontends/qt/GuiDocument.cpp:1339 src/frontends/qt/GuiDocument.cpp:1343
+#: src/frontends/qt/GuiDocument.cpp:1347 src/frontends/qt/GuiDocument.cpp:1351
+#: src/frontends/qt/GuiDocument.cpp:1355 src/frontends/qt/GuiDocument.cpp:1359
+#: src/frontends/qt/GuiDocument.cpp:1830
+msgid "Page Margins"
+msgstr "页边距"
+
+#: src/frontends/qt/GuiDocument.cpp:1406
+msgid "Numbered"
+msgstr "编号"
+
+#: src/frontends/qt/GuiDocument.cpp:1407
+msgid "Appears in TOC"
+msgstr "显示于目录中"
+
+#: src/frontends/qt/GuiDocument.cpp:1495
+msgid "Package"
+msgstr "包"
+
+#: src/frontends/qt/GuiDocument.cpp:1495
+msgid "Load automatically"
+msgstr "自动载入"
+
+#: src/frontends/qt/GuiDocument.cpp:1496
+msgid "Load always"
+msgstr "总是载入"
+
+#: src/frontends/qt/GuiDocument.cpp:1496
+msgid "Do not load"
+msgstr "不要载入"
+
+#: src/frontends/qt/GuiDocument.cpp:1508
+msgid "The AMS LaTeX packages are always used"
+msgstr "将会一直使用 AMS LaTeX 包"
+
+#: src/frontends/qt/GuiDocument.cpp:1511
+#, c-format
+msgid "The LaTeX package %1$s is always used"
+msgstr "将会一直使用包 %1$s"
+
+#: src/frontends/qt/GuiDocument.cpp:1516
+msgid "The AMS LaTeX packages are never used"
+msgstr "将永不会使用 AMS LaTeX 包"
+
+#: src/frontends/qt/GuiDocument.cpp:1519
+#, c-format
+msgid "The LaTeX package %1$s is never used"
+msgstr "将永不会使用包 %1$s"
+
+#: src/frontends/qt/GuiDocument.cpp:1603 src/frontends/qt/GuiDocument.cpp:1838
+msgid "Math Options"
+msgstr "数学选项"
+
+#: src/frontends/qt/GuiDocument.cpp:1659 src/frontends/qt/GuiDocument.cpp:3056
+#, c-format
+msgid "%1$s [Class '%2$s']"
+msgstr "%1$s [Class '%2$s']"
+
+#: src/frontends/qt/GuiDocument.cpp:1662
+#, c-format
+msgid ""
+"Class not found by LyX. Please check if you have the matching %1$s class and "
+"all required packages (%2$s) installed."
+msgstr ""
+"LyX 找不到这个文档类。请检查您是否已安装文档类 %1$s 且所有必需的包 (%2$s) 都"
+"已安装。"
+
+#: src/frontends/qt/GuiDocument.cpp:1724
+#, fuzzy
+msgid "All avail. modules"
+msgstr "所有可用文献"
+
+#: src/frontends/qt/GuiDocument.cpp:1816 src/frontends/qt/GuiDocument.cpp:2099
+msgid "Input listings parameters below. Enter ? for a list of parameters."
+msgstr "在右边输入程序列表参数. 输入 ? 显示所有参数."
+
+#: src/frontends/qt/GuiDocument.cpp:1823
+msgid "Document Class"
+msgstr "文档类"
projects / lyx.git / blobdiff