+#: lib/ui/stdtoolbars.inc:1451
+msgid "Rising (accent)"
+msgstr "Stúpavý prízvuk"
+
+#: lib/ui/stdtoolbars.inc:1452
+msgid "Rising (tone letter)"
+msgstr "Stúpavý tón"
+
+#: lib/ui/stdtoolbars.inc:1453
+msgid "Falling (accent)"
+msgstr "Klesavý prízvuk"
+
+#: lib/ui/stdtoolbars.inc:1454
+msgid "Falling (tone letter)"
+msgstr "Klesavý tón"
+
+#: lib/ui/stdtoolbars.inc:1455
+msgid "High rising (accent)"
+msgstr "Silne stúpavý prízvuk"
+
+#: lib/ui/stdtoolbars.inc:1456
+msgid "High rising (tone letter)"
+msgstr "Silne stúpavý tón"
+
+#: lib/ui/stdtoolbars.inc:1457
+msgid "Low rising (accent)"
+msgstr "Slabo stúpavý prízvuk"
+
+#: lib/ui/stdtoolbars.inc:1458
+msgid "Low rising (tone letter)"
+msgstr "Silne klesavý tón"
+
+#: lib/ui/stdtoolbars.inc:1459
+msgid "Rising-falling (accent)"
+msgstr "Stúpavo-klesavý prízvuk"
+
+#: lib/ui/stdtoolbars.inc:1460
+msgid "Rising-falling (tone letter)"
+msgstr "Stúpavo-klesavý tón"
+
+#: lib/ui/stdtoolbars.inc:1461
+msgid "Global rise"
+msgstr "Globálne stúpa"
+
+#: lib/ui/stdtoolbars.inc:1462
+msgid "Global fall"
+msgstr "Globálne klesá"
+
+#: lib/xtemplates/chess.xtemplate:14
+msgid "ChessDiagram"
+msgstr "Šachovnica"
+
+#: lib/xtemplates/chess.xtemplate:15 lib/xtemplates/chess.xtemplate:34
+msgid "Chess diagram"
+msgstr "Šachový diagram"
+
+#: lib/xtemplates/chess.xtemplate:17
+msgid ""
+"A chess position diagram.\n"
+"This template will use XBoard to edit the position.\n"
+"Use the 'File->Save Position' in XBoard to save\n"
+"the position that you want to display.\n"
+"Make sure to give it a '.fen' extension\n"
+"and remember to type in a relative path\n"
+"to the LyX document location.\n"
+"Within XBoard, use 'Edit->Edit Position'\n"
+"to enable general editing of the board.\n"
+"You might also check out the\n"
+"'Options->Test legality' option, and\n"
+"remember to middle and right click to\n"
+"insert new material in the board.\n"
+"In order for this to work, you have to\n"
+"put the bundled lyxskak.sty in a place\n"
+"that TeX will find it, and you will need\n"
+"to install the skak package from CTAN.\n"
+msgstr ""
+"Šachový diagram.\n"
+"Táto šablóna použije program XBoard na editáciu pozície.\n"
+"Použite 'File->Save Position' v XBoard-u pre uloženie\n"
+"pozície, ktorú chcete zobraziť.\n"
+"Uistite sa, že má príponu '.fen'\n"
+"a nezabudnite dať relatívnu cestu\n"
+"k súboru do dokumentu LyX-a.\n"
+"Vnútri XBoard-u, použite 'Edit -> Edit Position'\n"
+"pre obecnú editáciu šachovnice.\n"
+"Možno chcete aj použiť voľbu\n"
+"'Voľby -> Test legality' a\n"
+"nezabudnite na pravé a prostredné tlačidlo myši\n"
+"pre vloženie nového materiálu na hraciu dosku.\n"
+"Aby to fungovalo musíte\n"
+"dať pribalený súbor lyxskak.sty na miesto\n"
+"kde ho nájde TeX. Ďalej je treba\n"
+"nainštalovať balík skak z CTAN-u.\n"
+
+#: lib/xtemplates/dia.xtemplate:14
+msgid "Dia"
+msgstr "Dia"
+
+#: lib/xtemplates/dia.xtemplate:15 lib/xtemplates/dia.xtemplate:18
+msgid "Dia diagram"
+msgstr "Dia diagram"
+
+#: lib/xtemplates/dia.xtemplate:17
+msgid "Dia diagram.\n"
+msgstr "Diagram programu Dia.\n"
+
+#: lib/xtemplates/gnumeric.xtemplate:13
+msgid "GnumericSpreadsheet"
+msgstr "GnumericTabuľkovýProcesor"
+
+#: lib/xtemplates/gnumeric.xtemplate:14 lib/xtemplates/gnumeric.xtemplate:21
+msgid "Spreadsheet"
+msgstr "Tabuľkový procesor"
+
+#: lib/xtemplates/gnumeric.xtemplate:16
+msgid ""
+"A spreadsheet made with Gnumeric, LibreOffice, OpenOffice or Excel.\n"
+"It imports as a multi-page table, so any length\n"
+"is ok. Excessive width could be a problem.\n"
+"The gnumeric software is necessary for conversion,\n"
+"both for gnumeric and excel files.\n"
+msgstr ""
+"Tabuľka vytvorená s gnumeric, libreoffice, openoffice alebo excel.\n"
+"Import prevádza do viacstranných tabuliek, čiže každá dĺžka je v poriadku.\n"
+"Prehnaná šírka by mohla mať problém.\n"
+"Pre konverziu gnumeric alebo excel súborov\n"
+"je potrebný program gnumeric.\n"
+
+#: lib/xtemplates/inkscape.xtemplate:37
+msgid "Inkscape"
+msgstr "Inkscape"
+
+#: lib/xtemplates/inkscape.xtemplate:38 lib/xtemplates/inkscape.xtemplate:43
+msgid "Inkscape figure"
+msgstr "Inkscape obrázok"
+
+#: lib/xtemplates/inkscape.xtemplate:40
+msgid ""
+"An Inkscape figure.\n"
+"Note that using this template automatically uses the \n"
+"document text in the image (like with the Xfig template).\n"
+msgstr ""
+"Inkscape obrázok.\n"
+"Berte na vedomie, že táto šablóna automatický používa\n"
+"dokumentový text v obrázku (podobne ako v Xfig-šablóne).\n"
+
+#: lib/xtemplates/lilypond.xtemplate:15 lib/xtemplates/lilypond.xtemplate:21
+msgid "Lilypond typeset music"
+msgstr "Lilypond - sada nôt"
+
+#: lib/xtemplates/lilypond.xtemplate:17
+msgid ""
+"Sheet music typeset by GNU LilyPond,\n"
+"converted to .pdf or .eps for inclusion\n"
+"Using .eps requires at least lilypond 2.6\n"
+"Using .pdf requires at least lilypond 2.9\n"
+msgstr ""
+"Sada hudobných nôt pomocou programu GNU LilyPond.\n"
+"konvertovaná na .pdf alebo .eps pre zahrnutie\n"
+"Použitie .eps vyžaduje aspoň lilypond 2.6\n"
+"Použitie .pdf vyžaduje aspoň lilypond 2.9\n"
+
+#: lib/xtemplates/pdfpages.xtemplate:13
+msgid "PDFPages"
+msgstr "PDFStránky"
+
+#: lib/xtemplates/pdfpages.xtemplate:14 lib/xtemplates/pdfpages.xtemplate:28
+msgid "PDF pages"
+msgstr "PDF stránky"
+
+#: lib/xtemplates/pdfpages.xtemplate:16
+msgid ""
+"Includes PDF documents, using the 'pdfpages' package.\n"
+"To include multiple pages, use the 'pages'-option,\n"
+"which must be inserted to 'Options'.\n"
+"Examples:\n"
+"* pages={x-y} (for a range of pages)\n"
+"* pages={x,y,z} (for specific pages)\n"
+"* pages=- (to include all pages)\n"
+"* pages=last-1 (to include all pages in reverse order)\n"
+"With the option 'noautoscale' the PDF pages are\n"
+"inserted in their original size.\n"
+"Read the documentation of the pdfpages package\n"
+"for further options and details.\n"
+msgstr ""
+"Vkladá PDF dokumenty, pomocou balíku 'pdfpages'.\n"
+"Pre vloženie viacerých stránok použite voľbu 'pages',\n"
+"ktorú musíte pridať v 'Voľby'.\n"
+"Príklady:\n"
+"* pages={x-y} (pre rozsah stránok)\n"
+"* pages={x,y,z} (pre vybrané stránky)\n"
+"* pages=- (pre všetky stránky)\n"
+"* pages=last-1 (na vklad všetkých strán v opačnom poradí)\n"
+"S voľbou 'noautoscale' sa PDF stránky\n"
+"vložia v originálnej veľkosti.\n"
+"Prečítajte si dokumentáciu balíka pdfpages\n"
+"pre ďalšie nastavenia a detaily.\n"
+
+#: lib/xtemplates/raster_image.xtemplate:14
+msgid "RasterImage"
+msgstr "Rastrový obrázok"
+
+#: lib/xtemplates/raster_image.xtemplate:17
+#: lib/xtemplates/raster_image.xtemplate:24
+msgid "Raster image"
+msgstr "Rastrový obrázok"
+
+#: lib/xtemplates/raster_image.xtemplate:22
+msgid ""
+"A bitmap file.\n"
+"Use this template to include bitmap images of any kind.\n"
+msgstr ""
+"Bitmap súbor.\n"
+"Použite túto šablónu na vklad bitmapových obrázkov akéhokoľvek typu.\n"
+
+#: lib/xtemplates/vector_graphics.xtemplate:14
+msgid "VectorGraphics"
+msgstr "VektorováGrafike"
+
+#: lib/xtemplates/vector_graphics.xtemplate:15
+#: lib/xtemplates/vector_graphics.xtemplate:24
+msgid "Vector graphics"
+msgstr "Vektorová grafika"
+
+#: lib/xtemplates/vector_graphics.xtemplate:17
+msgid ""
+"A vector graphics file.\n"
+"Use this template to include vector graphics of any kind.\n"
+"LyX will try to retain the vector properties of the image for\n"
+"the final output.\n"
+"Note that specialized templates exist for Xfig figures and Dia diagrams.\n"
+"The specialized templates allow to automatically use the document font in\n"
+"the figures, which is not possible with this general template.\n"
+msgstr ""
+"Súbor s vektorovou grafikou.\n"
+"Používajte túto šablónu na vklad akýchkoľvek obrázkov s vektorovou "
+"grafikou.\n"
+"LyX sa pokúsi držať vektorové vlastnosti obrázku pre konečný výstup.\n"
+"Všimnite si že existujú špecializované šablóny pre Xfig obrázky a Dia "
+"diagramy.\n"
+"Špecializované šablóny dovoľujú automaticky použiť font dokumentu v\n"
+"obrázkoch, čo nie je možné so všeobecnou šablónou.\n"
+
+#: lib/xtemplates/xfig.xtemplate:33
+msgid "XFig"
+msgstr "XFig"
+
+#: lib/xtemplates/xfig.xtemplate:34 lib/xtemplates/xfig.xtemplate:37
+msgid "Xfig figure"
+msgstr "Xfig obrázok"
+
+#: lib/xtemplates/xfig.xtemplate:36
+msgid "An Xfig figure.\n"
+msgstr "Jeden Xfig obrázok.\n"
+
+#: lib/configure.py:589
+msgid "tgo"
+msgstr "tgo"
+
+#: lib/configure.py:589
+msgid "tgo|Tgif"
+msgstr "tgo|Tgif"
+
+#: lib/configure.py:592
+msgid "FIG"
+msgstr "FIG"
+
+#: lib/configure.py:595
+msgid "DIA"
+msgstr "DIA"
+
+#: lib/configure.py:598
+msgid "sxd"
+msgstr "sxd"
+
+#: lib/configure.py:598
+msgid "sxd|OpenDocument"
+msgstr "sxd|OpenDocument"
+
+#: lib/configure.py:601
+msgid "Grace"
+msgstr "Grace"
+
+#: lib/configure.py:604
+msgid "FEN"
+msgstr "FEN"
+
+#: lib/configure.py:607
+msgid "SVG"
+msgstr "SVG"
+
+#: lib/configure.py:608
+msgid "SVG (compressed)"
+msgstr "SVG (komprimované)"
+
+#: lib/configure.py:611
+msgid "BMP"
+msgstr "BMP"
+
+#: lib/configure.py:612
+msgid "GIF"
+msgstr "GIF"
+
+#: lib/configure.py:613
+msgid "jpeg"
+msgstr "jpeg"
+
+#: lib/configure.py:613
+msgid "jpeg|JPEG"
+msgstr "jpeg|JPEG"
+
+#: lib/configure.py:614
+msgid "PBM"
+msgstr "PBM"
+
+#: lib/configure.py:615
+msgid "PGM"
+msgstr "PGM"
+
+#: lib/configure.py:616 src/frontends/qt4/GuiClipboard.cpp:176
+msgid "PNG"
+msgstr "PNG"
+
+#: lib/configure.py:617
+msgid "PPM"
+msgstr "PPM"
+
+#: lib/configure.py:618
+msgid "TIFF"
+msgstr "TIFF"
+
+#: lib/configure.py:619
+msgid "XBM"
+msgstr "XBM"
+
+#: lib/configure.py:620
+msgid "XPM"
+msgstr "XPM"
+
+#: lib/configure.py:633
+msgid "Plain text (chess output)"
+msgstr "Prostý text (šachy)"
+
+#: lib/configure.py:634 src/frontends/qt4/GuiDocument.cpp:1341
+#: src/frontends/qt4/GuiErrorList.cpp:45
+msgid "DocBook"
+msgstr "DocBook"
+
+#: lib/configure.py:634
+msgid "DocBook|B"
+msgstr "DocBook"
+
+#: lib/configure.py:635
+msgid "DocBook (XML)"
+msgstr "DocBook (XML)"
+
+#: lib/configure.py:636
+msgid "Graphviz Dot"
+msgstr "Graphviz Dot"
+
+#: lib/configure.py:637
+msgid "LaTeX (dviluatex)"
+msgstr "LaTeX (dviluatex)"
+
+#: lib/configure.py:638
+msgid "LaTeX (pLaTeX)"
+msgstr "LaTeX (pLaTeX)"
+
+#: lib/configure.py:639
+msgid "NoWeb"
+msgstr "NoWeb"
+
+#: lib/configure.py:639
+msgid "NoWeb|N"
+msgstr "NoWeb"
+
+#: lib/configure.py:641
+msgid "R/S code"
+msgstr "R/S kód"
+
+#: lib/configure.py:643
+msgid "LilyPond music"
+msgstr "LilyPond nóty"
+
+#: lib/configure.py:644
+msgid "LilyPond book (LaTeX)"
+msgstr "LilyPond Kniha (LaTeX)"
+
+#: lib/configure.py:645
+msgid "LaTeX (plain)"
+msgstr "LaTeX (prostý)"
+
+#: lib/configure.py:645
+msgid "LaTeX (plain)|L"
+msgstr "LaTeX (prostý)"
+
+#: lib/configure.py:646
+msgid "LaTeX (LuaTeX)"
+msgstr "LaTeX (LuaTeX)"
+
+#: lib/configure.py:647
+msgid "LaTeX (pdflatex)"
+msgstr "LaTeX (pdflatex)"
+
+#: lib/configure.py:648
+msgid "LaTeX (XeTeX)"
+msgstr "LaTeX (XeTeX)"
+
+#: lib/configure.py:649
+msgid "LaTeX (clipboard)"
+msgstr "LaTeX (schránka)"
+
+#: lib/configure.py:650
+msgid "Plain text"
+msgstr "Prostý text"
+
+#: lib/configure.py:650
+msgid "Plain text|a"
+msgstr "Prostý text"
+
+#: lib/configure.py:651
+msgid "Plain text (pstotext)"
+msgstr "Prostý text (pstotext)"
+
+#: lib/configure.py:652
+msgid "Plain text (ps2ascii)"
+msgstr "Prostý text (ps2ascii)"
+
+#: lib/configure.py:653
+msgid "Plain text (catdvi)"
+msgstr "Prostý text (catdvi)"
+
+#: lib/configure.py:654
+msgid "Plain Text, Join Lines"
+msgstr "Prostý text, riadky spojiť"
+
+#: lib/configure.py:655
+msgid "Info (Beamer)"
+msgstr "Info (Beamer)"
+
+#: lib/configure.py:658
+msgid "Gnumeric spreadsheet"
+msgstr "Gnumeric tabuľkový procesor"
+
+#: lib/configure.py:659
+msgid "Excel spreadsheet"
+msgstr "Excel tabuľkový procesor"
+
+#: lib/configure.py:660
+msgid "MS Excel Office Open XML"
+msgstr "MS-Excel Office-Open XML"
+
+#: lib/configure.py:661
+msgid "HTML Table (for spreadsheets)"
+msgstr "HTML Tabuľka (pre tabuľkové procesory)"
+
+#: lib/configure.py:662
+msgid "OpenDocument spreadsheet"
+msgstr "OpenDocument tabuľkový procesor"
+
+#: lib/configure.py:665
+msgid "LyXHTML"
+msgstr "LyXHTML"
+
+#: lib/configure.py:665
+msgid "LyXHTML|y"
+msgstr "LyXHTML"
+
+#: lib/configure.py:673 src/frontends/qt4/GuiLog.cpp:252
+#: src/insets/InsetBibtex.cpp:155
+msgid "BibTeX"
+msgstr "BibTeX"
+
+#: lib/configure.py:681
+msgid "EPS"
+msgstr "EPS"
+
+#: lib/configure.py:682
+msgid "EPS (uncropped)"
+msgstr "EPS (neorezaný)"
+
+#: lib/configure.py:683
+msgid "EPS (cropped)"
+msgstr "EPS (orezaný)"
+
+#: lib/configure.py:684
+msgid "Postscript"
+msgstr "Postscript"
+
+#: lib/configure.py:684
+msgid "Postscript|t"
+msgstr "Postscript"
+
+#: lib/configure.py:693
+msgid "PDF (ps2pdf)"
+msgstr "PDF (ps2pdf)"
+
+#: lib/configure.py:693
+msgid "PDF (ps2pdf)|P"
+msgstr "PDF (ps2pdf)"
+
+#: lib/configure.py:694
+msgid "PDF (pdflatex)"
+msgstr "PDF (pdflatex)"
+
+#: lib/configure.py:694
+msgid "PDF (pdflatex)|F"
+msgstr "PDF (pdflatex)"
+
+#: lib/configure.py:695
+msgid "PDF (dvipdfm)"
+msgstr "PDF (dvipdfm)"
+
+#: lib/configure.py:695
+msgid "PDF (dvipdfm)|m"
+msgstr "PDF (dvipdfm)"
+
+#: lib/configure.py:696
+msgid "PDF (XeTeX)"
+msgstr "PDF (XeTeX)"
+
+#: lib/configure.py:696
+msgid "PDF (XeTeX)|X"
+msgstr "PDF (XeTeX)|X"
+
+#: lib/configure.py:697
+msgid "PDF (LuaTeX)"
+msgstr "PDF (LuaTeX)"
+
+#: lib/configure.py:697
+msgid "PDF (LuaTeX)|u"
+msgstr "PDF (LuaTeX)|u"
+
+#: lib/configure.py:698
+msgid "PDF (graphics)"
+msgstr "PDF (grafika)"
+
+#: lib/configure.py:699
+msgid "PDF (cropped)"
+msgstr "PDF (orezaný)"
+
+#: lib/configure.py:700
+msgid "PDF (lower resolution)"
+msgstr "PDF (nízke rozlišovanie)"
+
+#: lib/configure.py:705
+msgid "DVI"
+msgstr "DVI"
+
+#: lib/configure.py:705
+msgid "DVI|D"
+msgstr "DVI"
+
+#: lib/configure.py:706
+msgid "DVI (LuaTeX)"
+msgstr "DVI (LuaTeX)"
+
+#: lib/configure.py:706
+msgid "DVI (LuaTeX)|V"
+msgstr "DVI (LuaTeX)|V"
+
+#: lib/configure.py:709
+msgid "DraftDVI"
+msgstr "DraftDVI"
+
+#: lib/configure.py:712 lib/configure.py:748
+msgid "htm"
+msgstr "htm"
+
+#: lib/configure.py:712 lib/configure.py:748
+msgid "htm|HTML"
+msgstr "htm|HTML"
+
+#: lib/configure.py:715
+msgid "Noteedit"
+msgstr "Noteedit"
+
+#: lib/configure.py:718
+msgid "OpenDocument (tex4ht)"
+msgstr "OpenDocument (tex4ht)"
+
+#: lib/configure.py:719
+msgid "OpenDocument (eLyXer)"
+msgstr "OpenDocument (eLyXer)"
+
+#: lib/configure.py:720
+msgid "OpenDocument (Pandoc)"
+msgstr "OpenDocument (Pandoc)"
+
+#: lib/configure.py:721
+msgid "OpenOffice.Org (sxw)"
+msgstr "OpenOffice.Org (sxw)"
+
+#: lib/configure.py:724
+msgid "Rich Text Format"
+msgstr "Rich Text Format"
+
+#: lib/configure.py:725
+msgid "MS Word"
+msgstr "MS Word"
+
+#: lib/configure.py:725
+msgid "MS Word|W"
+msgstr "MS Word"
+
+#: lib/configure.py:726
+msgid "MS Word Office Open XML"
+msgstr "MS-Word Office-Open XML"
+
+#: lib/configure.py:726
+msgid "MS Word Office Open XML|O"
+msgstr "MS-Word Office-Open XML|W"
+
+#: lib/configure.py:729
+msgid "Table (CSV)"
+msgstr "Tabuľka (CSV)"
+
+#: lib/configure.py:731 src/frontends/qt4/GuiView.cpp:1326
+#: src/mathed/InsetMathMacroTemplate.cpp:537
+msgid "LyX"
+msgstr "LyX"
+
+#: lib/configure.py:732
+msgid "LyX 1.3.x"
+msgstr "LyX 1.3.x"
+
+#: lib/configure.py:733
+msgid "LyX 1.4.x"
+msgstr "LyX 1.4.x"
+
+#: lib/configure.py:734
+msgid "LyX 1.5.x"
+msgstr "LyX 1.5.x"
+
+#: lib/configure.py:735
+msgid "LyX 1.6.x"
+msgstr "LyX 1.6.x"
+
+#: lib/configure.py:736
+msgid "LyX 2.0.x"
+msgstr "LyX 2.0.x"
+
+#: lib/configure.py:737
+msgid "LyX 2.1.x"
+msgstr "LyX 2.1.x"
+
+#: lib/configure.py:738
+msgid "LyX 2.2.x"
+msgstr "LyX 2.2.x"
+
+#: lib/configure.py:739
+msgid "CJK LyX 1.4.x (big5)"
+msgstr "CJK LyX 1.4.x (big5)"
+
+#: lib/configure.py:740
+msgid "CJK LyX 1.4.x (euc-jp)"
+msgstr "CJK LyX 1.4.x (euc-jp)"
+
+#: lib/configure.py:741
+msgid "CJK LyX 1.4.x (euc-kr)"
+msgstr "CJK LyX 1.4.x (euc-kr)"
+
+#: lib/configure.py:742
+msgid "LyX Preview"
+msgstr "Náhľad LyX"
+
+#: lib/configure.py:743
+msgid "pdf_tex"
+msgstr "pdf_tex"
+
+#: lib/configure.py:743
+msgid "pdf_tex|PDFTEX"
+msgstr "pdf_tex|PDFTEX"
+
+#: lib/configure.py:744
+msgid "Program"
+msgstr "Program"
+
+#: lib/configure.py:745
+msgid "ps_tex"
+msgstr "ps_tex"
+
+#: lib/configure.py:745
+msgid "ps_tex|PSTEX"
+msgstr "ps_tex|PSTEX"
+
+#: lib/configure.py:746 src/frontends/qt4/GuiClipboard.cpp:173
+msgid "Windows Metafile"
+msgstr "Windows Metafile"
+
+#: lib/configure.py:747 src/frontends/qt4/GuiClipboard.cpp:172
+msgid "Enhanced Metafile"
+msgstr "Rozšírený WMF"
+
+#: lib/configure.py:863
+msgid "LyXBlogger"
+msgstr "LyXBlogger"
+
+#: lib/configure.py:1058
+msgid "gnuplot"
+msgstr "gnuplot"
+
+#: lib/configure.py:1058
+msgid "gnuplot|Gnuplot"
+msgstr "gnuplot|Gnuplot"
+
+#: lib/configure.py:1130
+msgid "LyX Archive (zip)"
+msgstr "LyX Archív (zip)"
+
+#: lib/configure.py:1133
+msgid "LyX Archive (tar.gz)"
+msgstr "LyX Archív (tar.gz)"
+
+#: src/Author.cpp:57
+#, c-format
+msgid "%1$s[[name]] (%2$s[[email]])"
+msgstr "%1$s (%2$s)"
+
+#: src/BiblioInfo.cpp:795 src/BiblioInfo.cpp:838 src/BiblioInfo.cpp:849
+#: src/BiblioInfo.cpp:904 src/BiblioInfo.cpp:908
+msgid "ERROR!"
+msgstr "CHYBA!"
+
+#: src/BiblioInfo.cpp:1285
+msgid "No year"
+msgstr "Bez roku"
+
+#: src/BiblioInfo.cpp:1295
+msgid "Bibliography entry not found!"
+msgstr "Bibliografické heslo nenájdené!"
+
+#: src/Buffer.cpp:425
+msgid "Disk Error: "
+msgstr "Chyba Disku: "
+
+#: src/Buffer.cpp:426
+#, c-format
+msgid ""
+"LyX could not create the temporary directory '%1$s' (Disk is full maybe?)"
+msgstr "LyX nemohol vytvoriť pomocný adresár '%1$s' (možné že je plný disk?)"
+
+#: src/Buffer.cpp:555
+msgid "LyX attempted to close a document that had unsaved changes!\n"
+msgstr "LyX sa pokúsil zavrieť dokument s neuloženými zmenami!\n"
+
+#: src/Buffer.cpp:559 src/Buffer.cpp:1613
+msgid "Save failed! Document is lost."
+msgstr "Uloženie zlyhalo! Dokument je stratený."
+
+#: src/Buffer.cpp:561
+msgid "Attempting to close changed document!"
+msgstr "Pokúšam sa zavrieť zmenený dokument!"
+
+#: src/Buffer.cpp:570
+#, c-format
+msgid "Could not remove the temporary directory %1$s"
+msgstr "Pomocný adresár %1$s sa nedal zmazať"
+
+#: src/Buffer.cpp:977 src/Text.cpp:551
+#, c-format
+msgid "Unknown token: %1$s %2$s\n"
+msgstr "Neznámy token: %1$s %2$s\n"
+
+#: src/Buffer.cpp:981 src/Buffer.cpp:987 src/Buffer.cpp:1009
+msgid "Document header error"
+msgstr "Chyba v hlavičke dokumentu"
+
+#: src/Buffer.cpp:986
+msgid "\\begin_header is missing"
+msgstr "chýba \\begin_header"
+
+#: src/Buffer.cpp:1008
+msgid "\\begin_document is missing"
+msgstr "chýba \\begin_document"
+
+#: src/Buffer.cpp:1020 src/Buffer.cpp:1026 src/Buffer.cpp:2878
+#: src/Buffer.cpp:2884
+msgid "Changes not shown in LaTeX output"
+msgstr "Zmeny nezobrazené v LaTeX-ovom výstupe"
+
+#: src/Buffer.cpp:1021 src/Buffer.cpp:2879
+msgid ""
+"Changes will not be highlighted in LaTeX output, because neither dvipost nor "
+"xcolor/ulem are installed.\n"
+"Please install these packages or redefine \\lyxadded and \\lyxdeleted in the "
+"LaTeX preamble."
+msgstr ""
+"Zmeny nebudú zvýraznené v LaTeX-ovom výstupe, lebo ani dvipost ani xcolor/"
+"ulem nie sú nainštalované.\n"
+"Prosím nainštalujte tieto balíky alebo predefinujte \\lyxadded a "
+"\\lyxdeleted v LaTeX-ovej preambuly."
+
+#: src/Buffer.cpp:1027 src/Buffer.cpp:2885
+msgid ""
+"Changes will not be highlighted in LaTeX output when using pdflatex, because "
+"xcolor and ulem are not installed.\n"
+"Please install both packages or redefine \\lyxadded and \\lyxdeleted in the "
+"LaTeX preamble."
+msgstr ""
+"Zmeny nebudú zvýraznené v LaTeX-ovom výstupe pri použití pdflatex, lebo ani "
+"dvipost ani xcolor/ulem nie sú nainštalované.\n"
+"Prosím nainštalujte oba balíky alebo predefinujte \\lyxadded a \\lyxdeleted "
+"v LaTeX-ovej preambuly."
+
+#: src/Buffer.cpp:1065 src/BufferParams.cpp:455
+#: src/frontends/qt4/GuiLog.cpp:256 src/insets/InsetIndex.cpp:455
+msgid "Index"
+msgstr "Register"
+
+#: src/Buffer.cpp:1168
+msgid "File Not Found"
+msgstr "Súbor Nenájdený"
+
+#: src/Buffer.cpp:1169
+#, c-format
+msgid "Unable to open file `%1$s'."
+msgstr "Nemôžem otvoriť súbor `%1$s'."
+
+#: src/Buffer.cpp:1197 src/Buffer.cpp:1266
+msgid "Document format failure"
+msgstr "Chybný formát dokumentu"
+
+#: src/Buffer.cpp:1198
+#, c-format
+msgid "%1$s ended unexpectedly, which means that it is probably corrupted."
+msgstr "%1$s skončil neočakávane, čo znamená, že je pravdepodobne poškodený."
+
+#: src/Buffer.cpp:1267
+#, c-format
+msgid "%1$s is not a readable LyX document."
+msgstr "%1$s nie je čitateľný dokument LyXu."
+
+#: src/Buffer.cpp:1294
+msgid "Conversion failed"
+msgstr "Konverzia zlyhala"
+
+#: src/Buffer.cpp:1295
+#, c-format
+msgid ""
+"%1$s is from a different version of LyX, but a temporary file for converting "
+"it could not be created."
+msgstr ""
+"%1$s je z inej verzie LyX-u, ale pomocný súbor pre jeho konverziu sa nedal "
+"vytvoriť."
+
+#: src/Buffer.cpp:1305
+msgid "Conversion script not found"
+msgstr "Skript na konverziu nenájdený"
+
+#: src/Buffer.cpp:1306
+#, c-format
+msgid ""
+"%1$s is from a different version of LyX, but the conversion script lyx2lyx "
+"could not be found."
+msgstr "%1$s je z inej verzie LyX-u, ale konverzný skript lyx2lyx nenájdený."
+
+#: src/Buffer.cpp:1329 src/Buffer.cpp:1336
+msgid "Conversion script failed"
+msgstr "Konverzný skript zlyhal"
+
+#: src/Buffer.cpp:1330
+#, c-format
+msgid ""
+"%1$s is from an older version of LyX and the lyx2lyx script failed to "
+"convert it."
+msgstr ""
+"%1$s je zo staršej verzie LyX-u, a skript lyx2lyx zlyhal pri konverzii."
+
+#: src/Buffer.cpp:1337
+#, c-format
+msgid ""
+"%1$s is from a newer version of LyX and the lyx2lyx script failed to convert "
+"it."
+msgstr "%1$s je z novšej verzie LyX-u, a skript lyx2lyx zlyhal pri konverzii."
+
+#: src/Buffer.cpp:1394 src/Buffer.cpp:4557 src/Buffer.cpp:4620
+msgid "File is read-only"
+msgstr "Dokument je iba na čítanie"
+
+#: src/Buffer.cpp:1395
+#, c-format
+msgid "The file %1$s cannot be written because it is marked as read-only."
+msgstr "Súbor %1$s je neuložiteľný lebo je označený ako len na čítanie."
+
+#: src/Buffer.cpp:1404
+#, c-format
+msgid ""
+"Document %1$s has been externally modified. Are you sure you want to "
+"overwrite this file?"
+msgstr "Dokument %1$s bol externe modifikovaný. Naozaj ho chcete prepísať?"
+
+#: src/Buffer.cpp:1406
+msgid "Overwrite modified file?"
+msgstr "Prepísať modifikovaný súbor?"
+
+#: src/Buffer.cpp:1407 src/Exporter.cpp:50
+#: src/frontends/qt4/GuiClipboard.cpp:247 src/frontends/qt4/GuiView.cpp:2405
+#: src/frontends/qt4/GuiView.cpp:2590 src/frontends/qt4/GuiView.cpp:2692
+msgid "&Overwrite"
+msgstr "&Prepísať"
+
+#: src/Buffer.cpp:1469
+msgid "Backup failure"
+msgstr "Založenie zlyhalo"
+
+#: src/Buffer.cpp:1470
+#, c-format
+msgid ""
+"Cannot create backup file %1$s.\n"
+"Please check whether the directory exists and is writable."
+msgstr ""
+"LyX nemohol vytvoriť záložnú kópiu v %1$s.\n"
+"Skontrolujte, či daný adresár existuje a je možné do neho zapisovať."
+
+#: src/Buffer.cpp:1506 src/Buffer.cpp:1517
+msgid "Write failure"
+msgstr "Písanie zlyhalo"
+
+#: src/Buffer.cpp:1507
+#, c-format
+msgid ""
+"The file has successfully been saved as:\n"
+" %1$s.\n"
+"But LyX could not move it to:\n"
+" %2$s.\n"
+"Your original file has been backed up to:\n"
+" %3$s"
+msgstr ""
+"Dokument bol úspešne uložený ako:\n"
+" %1$ss\n"
+"Ale LyX ho nemohol presunúť na:\n"
+" %2$ss\n"
+"Váš pôvodný súbor bol založeny ako:\n"
+" %3$s"
+
+#: src/Buffer.cpp:1518
+#, c-format
+msgid ""
+"Cannot move saved file to:\n"
+" %1$s.\n"
+"But the file has successfully been saved as:\n"
+" %2$s."
+msgstr ""
+"Nemôžem premiestniť uložený súbor na:\n"
+" %1$s.\n"
+"Zato bol súbor ale úspešne uložený ako:\n"
+" %2$s."
+
+#: src/Buffer.cpp:1534
+#, c-format
+msgid "Saving document %1$s..."
+msgstr "Ukladám dokument %1$s…"
+
+#: src/Buffer.cpp:1549
+msgid " could not write file!"
+msgstr "Nemôžem písať do súbora!"
+
+#: src/Buffer.cpp:1557
+msgid " done."
+msgstr " hotové."
+
+#: src/Buffer.cpp:1572
+#, c-format
+msgid "LyX: Attempting to save document %1$s\n"
+msgstr "LyX: Pokúšam sa uložiť dokument %1$s\n"
+
+#: src/Buffer.cpp:1582 src/Buffer.cpp:1595 src/Buffer.cpp:1609
+#, c-format
+msgid "Saved to %1$s. Phew.\n"
+msgstr "Úspešne uložené do súboru %1$s. Uf.\n"
+
+#: src/Buffer.cpp:1585
+msgid "Save failed! Trying again...\n"
+msgstr "Uloženie zlyhalo! Skúšam ešte raz…\n"
+
+#: src/Buffer.cpp:1599
+msgid "Save failed! Trying yet again...\n"
+msgstr "Uloženie zlyhalo! Skúšam zatiaľ ešte raz…\n"
+
+#: src/Buffer.cpp:1704
+msgid "Iconv software exception Detected"
+msgstr "Iconv detegoval softvérovú výnimku"
+
+#: src/Buffer.cpp:1704
+#, c-format
+msgid ""
+"Please verify that the support software for your encoding (%1$s) is properly "
+"installed"
+msgstr ""
+"Skontrolujte prosím či softvér pre podporu vášho kódovania (%1$s) je správne "
+"inštalovaná"
+
+#: src/Buffer.cpp:1731
+#, c-format
+msgid "Could not find LaTeX command for character '%1$s' (code point %2$s)"
+msgstr "Nedá sa nájsť LaTeX-ov príkaz pre znak '%1$s' (hodnota %2$s)"
+
+#: src/Buffer.cpp:1734
+msgid ""
+"Some characters of your document are probably not representable in the "
+"chosen encoding.\n"
+"Changing the document encoding to utf8 could help."
+msgstr ""
+"Niektoré znaky vášho dokumentu sú pravdepodobne nereprezentovateľné vo "
+"zvolenom kódovaní.\n"
+"Pomôcť by mohla zmena kódovania dokumentu na utf8."
+
+#: src/Buffer.cpp:1741
+msgid "iconv conversion failed"
+msgstr "iconv konverzia zlyhala"
+
+#: src/Buffer.cpp:1746
+msgid "conversion failed"
+msgstr "Konverzia zlyhala"
+
+#: src/Buffer.cpp:1862
+msgid "Uncodable character in file path"
+msgstr "Nekódovateľný znak v ceste"
+
+#: src/Buffer.cpp:1864
+#, c-format
+msgid ""
+"The path of your document\n"
+"(%1$s)\n"
+"contains glyphs that are unknown in the current document encoding (namely "
+"%2$s). This may result in incomplete output, unless TEXINPUTS contains the "
+"document directory and you don't use explicitly relative paths (i.e., paths "
+"starting with './' or '../') in the preamble or in ERT.\n"
+"\n"
+"In case of problems, choose an appropriate document encoding\n"
+"(such as utf8) or change the file path name."
+msgstr ""
+"Cesta vášho dokumentu\n"
+"(%1$s)\n"
+"obsahuje glyfy neznáme v kódovaní\n"
+"aktuálneho dokumentu (menovite %2$s).\n"
+"Na úplný výsledok zaistite aby TEXINPUTS obsahovala cestu ku adresáru "
+"dokumentu alebo použite relatívne cesty (čiže cesty začínajúce s './' alebo "
+"s '../') v preambule alebo v ERT. \n"
+"\n"
+"V prípade problémov vyberte vhodné kódovanie dokumentu\n"
+"(ako napr. utf8) alebo zmeňte meno cesty."
+
+#: src/Buffer.cpp:1931
+#, c-format
+msgid "The languages %1$s are only supported by Babel."
+msgstr "Jazyky %1$s sú podporované len cez balík Babel."
+
+#: src/Buffer.cpp:1932
+#, c-format
+msgid "The language %1$s is only supported by Babel."
+msgstr "Jazyk %1$s je podporovaný len cez balík Babel."
+
+#: src/Buffer.cpp:1942
+#, c-format
+msgid "The languages %1$s are only supported by Polyglossia."
+msgstr "Jazyky %1$s sú podporované len cez balík Polyglossia."
+
+#: src/Buffer.cpp:1943
+#, c-format
+msgid "The language %1$s is only supported by Polyglossia."
+msgstr "Jazyk %1$s je podporovaný len cez balík Polyglossia."
+
+#: src/Buffer.cpp:1949
+msgid "Incompatible Languages!"
+msgstr "Inkompatibilné Jazyky!"
+
+#: src/Buffer.cpp:1951
+#, c-format
+msgid ""
+"You cannot use the following languages together in one LaTeX document "
+"because they require conflicting language packages:\n"
+"%1$s%2$s"
+msgstr ""
+"Nie je možné používať nasledovné jazyky spolu v jednom LaTeX dokumente lebo "
+"požadujú nekompatibilné jazykové balíky:\n"
+"%1$s%2$s"
+
+#: src/Buffer.cpp:2261
+msgid "Running chktex..."
+msgstr "Spúšťam chktex…"
+
+#: src/Buffer.cpp:2275
+msgid "chktex failure"
+msgstr "chktex zlyhal"
+
+#: src/Buffer.cpp:2276
+msgid "Could not run chktex successfully."
+msgstr "Nemôžem spustiť chktex úspešne."
+
+#: src/Buffer.cpp:2570
+#, c-format
+msgid "Don't know how to export to format: %1$s"
+msgstr "Žiadne informácie pre export formátu: %1$s"
+
+#: src/Buffer.cpp:2676
+#, c-format
+msgid "Error exporting to format: %1$s."
+msgstr "Chyba pri exporte na formát: %1$s."
+
+#: src/Buffer.cpp:2685
+msgid "Error generating literate programming code."
+msgstr "Chyba pri generovaní kódu dokumentačného programovania."
+
+#: src/Buffer.cpp:2765
+#, c-format
+msgid "Branch \"%1$s\" does not exist."
+msgstr "Vetva \"%1$s\" neexistuje."
+
+#: src/Buffer.cpp:2800
+#, c-format
+msgid "Branch \"%1$s\" already exists."
+msgstr "Vetva \"%1$s\" už existuje."
+
+#: src/Buffer.cpp:2857
+msgid "Error viewing the output file."
+msgstr "Chyba pri ukážke výstupného súboru."
+
+#: src/Buffer.cpp:3201 src/frontends/qt4/GuiView.cpp:2234
+#: src/frontends/qt4/Validator.cpp:222 src/insets/ExternalSupport.cpp:386
+#: src/insets/InsetGraphics.cpp:613 src/insets/InsetInclude.cpp:551
+msgid "Invalid filename"
+msgstr "Neplatné meno súboru"
+
+#: src/Buffer.cpp:3202 src/insets/ExternalSupport.cpp:387
+#: src/insets/InsetGraphics.cpp:614 src/insets/InsetInclude.cpp:552
+msgid ""
+"The following filename will cause troubles when running the exported file "
+"through LaTeX: "
+msgstr ""
+"Nasledujúce meno súboru je vhodné na spôsobenie problémov pri preklade "
+"exportovaného súboru LaTeX-om: "
+
+#: src/Buffer.cpp:3207 src/insets/ExternalSupport.cpp:392
+#: src/insets/InsetGraphics.cpp:621 src/insets/InsetInclude.cpp:556
+msgid "Problematic filename for DVI"
+msgstr "Meno súboru je pre DVI problematické"
+
+#: src/Buffer.cpp:3208 src/insets/ExternalSupport.cpp:393
+#: src/insets/InsetGraphics.cpp:622 src/insets/InsetInclude.cpp:557
+msgid ""
+"The following filename can cause troubles when running the exported file "
+"through LaTeX and opening the resulting DVI: "
+msgstr ""
+"Nasledujúce meno súboru je vhodné na spôsobenie problémov pri preklade "
+"exportovaného súboru LaTeX-om nasledujúc otvorením s DVI: "
+
+#: src/Buffer.cpp:3236 src/insets/InsetBibtex.cpp:342
+msgid "Export Warning!"
+msgstr "Export-Varovanie!"
+
+#: src/Buffer.cpp:3237
+msgid ""
+"There are spaces in the paths to your BibTeX databases.\n"
+"BibTeX will be unable to find them."
+msgstr ""
+"V cestách k databázam BibTeX-u sú medzery.\n"
+"BibTeX nebude schopný také databázy nájsť."
+
+#: src/Buffer.cpp:3865
+#, c-format
+msgid "Preview source code for paragraph %1$d"
+msgstr "Náhľad na zdrojový text odstavca %1$d"
+
+#: src/Buffer.cpp:3869
+#, c-format
+msgid "Preview source code from paragraph %1$s to %2$s"
+msgstr "Náhľad zdrojového kódu pre odstavce %1$s - %2$s"
+
+#: src/Buffer.cpp:3921
+msgid "Preview source code"
+msgstr "Náhľad na zdrojový text"
+
+#: src/Buffer.cpp:3923
+msgid "Preview preamble"
+msgstr "Prehľad preambule"
+
+#: src/Buffer.cpp:3925
+msgid "Preview body"
+msgstr "Prehľad tela"
+
+#: src/Buffer.cpp:3940
+msgid "Plain text does not have a preamble."
+msgstr "Prostý text nemá preambulu."
+
+#: src/Buffer.cpp:4045
+#, c-format
+msgid "Auto-saving %1$s"
+msgstr "Automatické ukladanie %1$s"
+
+#: src/Buffer.cpp:4101
+msgid "Autosave failed!"
+msgstr "Automatické ukladanie zlyhalo!"
+
+#: src/Buffer.cpp:4162
+msgid "Autosaving current document..."
+msgstr "Automatické ukladanie súčasného dokumentu…"
+
+#: src/Buffer.cpp:4287
+msgid "Couldn't export file"
+msgstr "Nemôžem exportovať súbor"
+
+#: src/Buffer.cpp:4288
+#, c-format
+msgid "No information for exporting the format %1$s."
+msgstr "Žiadne informácie pre export formátu %1$s."
+
+#: src/Buffer.cpp:4349 src/frontends/qt4/GuiView.cpp:2378
+msgid "File name error"
+msgstr "Chyba v názve súboru"
+
+#: src/Buffer.cpp:4350
+msgid "The directory path to the document cannot contain spaces."
+msgstr "Cesta k dokumentu nesmie obsahovať medzery."
+
+#: src/Buffer.cpp:4450 src/Buffer.cpp:4464 src/frontends/qt4/GuiView.cpp:662
+msgid "Document export cancelled."
+msgstr "Exportovanie dokumentu bolo zrušené."
+
+#: src/Buffer.cpp:4467
+#, c-format
+msgid "Document exported as %1$s to file `%2$s'"
+msgstr "Dokument exportovaný ako %1$s do súboru `%2$s'"
+
+#: src/Buffer.cpp:4474
+#, c-format
+msgid "Document exported as %1$s"
+msgstr "Dokument exportovaný ako %1$s"
+
+#: src/Buffer.cpp:4543
+#, c-format
+msgid ""
+"An emergency save of the document %1$s exists.\n"
+"\n"
+"Recover emergency save?"
+msgstr ""
+"Existuje núdzovú kópia dokumentu %1$s.\n"
+"\n"
+"Získať núdzovú kópiu späť?"
+
+#: src/Buffer.cpp:4546
+msgid "Load emergency save?"
+msgstr "Nahrať núdzovú kópiu ?"
+
+#: src/Buffer.cpp:4547
+msgid "&Recover"
+msgstr "&Obnoviť"
+
+#: src/Buffer.cpp:4547
+msgid "&Load Original"
+msgstr "&Nahrať Originál"
+
+#: src/Buffer.cpp:4558
+#, c-format
+msgid ""
+"An emergency file is successfully loaded, but the original file %1$s is "
+"marked read-only. Please make sure to save the document as a different file."
+msgstr ""
+"Bezpečnostný súbor úspešne načítaný, ale originálny súbor %1$s je označený "
+"len na čítanie. Zaistite prosím uloženie dokumentu ako iný súbor."
+
+#: src/Buffer.cpp:4565
+msgid "Document was successfully recovered."
+msgstr "Dokument bol úspešne obnovený."
+
+#: src/Buffer.cpp:4567
+msgid "Document was NOT successfully recovered."
+msgstr "Dokument NEBOL úspešne obnovený."
+
+#: src/Buffer.cpp:4568
+#, c-format
+msgid ""
+"Remove emergency file now?\n"
+"(%1$s)"
+msgstr ""
+"Zmazať núdzovú kópiu teraz?\n"
+"(%1$s)"
+
+#: src/Buffer.cpp:4572 src/Buffer.cpp:4584
+msgid "Delete emergency file?"
+msgstr "Zmazať núdzový súbor?"
+
+#: src/Buffer.cpp:4573 src/Buffer.cpp:4586
+msgid "&Keep"
+msgstr "&Držať"
+
+#: src/Buffer.cpp:4577
+msgid "Emergency file deleted"
+msgstr "Núdzový súbor vymazaný"
+
+#: src/Buffer.cpp:4578
+msgid "Do not forget to save your file now!"
+msgstr "Teraz nezabudnite uložiť váš súbor!"
+
+#: src/Buffer.cpp:4585
+msgid "Remove emergency file now?"
+msgstr "Zmazať núdzovú kópiu teraz?"
+
+#: src/Buffer.cpp:4608
+#, c-format
+msgid ""
+"The backup of the document %1$s is newer.\n"
+"\n"
+"Load the backup instead?"
+msgstr ""
+"Záloha dokumentu %1$s je novšia.\n"
+"\n"
+"Nahrať radšej zálohu ?"
+
+#: src/Buffer.cpp:4610
+msgid "Load backup?"
+msgstr "Nahrať zálohu?"
+
+#: src/Buffer.cpp:4611
+msgid "&Load backup"
+msgstr "&Nahrať zálohu"
+
+#: src/Buffer.cpp:4611
+msgid "Load &original"
+msgstr "Nahrať &pôvodné"
+
+#: src/Buffer.cpp:4621
+#, c-format
+msgid ""
+"A backup file is successfully loaded, but the original file %1$s is marked "
+"read-only. Please make sure to save the document as a different file."
+msgstr ""
+"Zálohový súbor úspešne načítaný, ale originálny súbor %1$s je označený len "
+"na čítanie. Zaistite prosím uloženie dokumentu ako iný súbor."
+
+#: src/Buffer.cpp:4952 src/insets/InsetCaption.cpp:380
+msgid "Senseless!!! "
+msgstr "Nezmyselné!!! "
+
+#: src/Buffer.cpp:5174
+#, c-format
+msgid "Document %1$s reloaded."
+msgstr "Dokument %1$s znovu nahraný."
+
+#: src/Buffer.cpp:5177
+#, c-format
+msgid "Could not reload document %1$s."
+msgstr "Nedá sa znova nahrať dokument %1$s."
+
+#: src/BufferParams.cpp:507
+msgid ""
+"The LaTeX package amsmath is only used if AMS formula types or symbols from "
+"the AMS math toolbars are inserted into formulas"
+msgstr ""
+"Balík amsmath bude použitý len v prípade, že vo formulách sú vložené aj "
+"symboly z mat. lišty nástrojov AMS"
+
+#: src/BufferParams.cpp:509
+msgid ""
+"The LaTeX package amssymb is only used if symbols from the AMS math toolbars "
+"are inserted into formulas"
+msgstr ""
+"Balík amssymb bude použitý len v prípade, že vo formulách sú vložené aj "
+"symboly z mat. lišty nástrojov AMS"
+
+#: src/BufferParams.cpp:511
+msgid ""
+"The LaTeX package cancel is only used if \\cancel commands are used in "
+"formulas"
+msgstr ""
+"LaTeX balík cancel sa použije len v prípade, keď sa vo formulách nájdu aj "
+"\\cancel symboly"
+
+#: src/BufferParams.cpp:513
+msgid ""
+"The LaTeX package esint is only used if special integral symbols are "
+"inserted into formulas"
+msgstr ""
+"LaTeX balík esint použiť len v prípade, keď sa vo formulách nájdu aj "
+"špeciálne integrálne symboly"
+
+#: src/BufferParams.cpp:515
+msgid ""
+"The LaTeX package mathdots is only used if the command \\iddots is inserted "
+"into formulas"
+msgstr ""
+"LaTeX balík mathdots sa použije len v prípade, keď sa vo formulách nájde aj "
+"symbol \\iddots"
+
+#: src/BufferParams.cpp:517
+msgid ""
+"The LaTeX package mathtools is only used if some mathematical relations are "
+"inserted into formulas"
+msgstr ""
+"LaTeX balík mathtools sa použije len v prípade, keď sa vo formulách nájdu aj "
+"niektoré matematické relácie"
+
+#: src/BufferParams.cpp:519
+msgid ""
+"The LaTeX package mhchem is only used if either the command \\ce or \\cf is "
+"inserted into formulas"
+msgstr ""
+"LaTeX balík mhchem použiť len v prípade, keď sa vo formulách nájdu aj "
+"symboly \\ce alebo \\cf"
+
+#: src/BufferParams.cpp:521
+msgid ""
+"The LaTeX package stackrel is only used if the command \\stackrel with "
+"subscript is inserted into formulas"
+msgstr ""
+"LaTeX balík stackrel sa použije len v prípade, keď sa vo formulách nájde aj "
+"príkaz \\stackrel s dolným indexom"
+
+#: src/BufferParams.cpp:523
+msgid ""
+"The LaTeX package stmaryrd is only used if symbols from the St Mary's Road "
+"symbol font for theoretical computer science are inserted into formulas"
+msgstr ""
+"Balík stmaryrd bude použitý len v prípade, že vo formulách sú vložené aj "
+"symboly z fontu St Mary's Road pre teoretickú počítačovú vedu"
+
+#: src/BufferParams.cpp:525
+msgid ""
+"The LaTeX package undertilde is only used if you use the math frame "
+"decoration 'utilde'"
+msgstr ""
+"LaTeX balík undertilde použiť len v prípade, keď sa vo formulách nájdu aj "
+"dekorácie 'utilde'"
+
+#: src/BufferParams.cpp:730
+#, c-format
+msgid ""
+"The selected document class\n"
+"\t%1$s\n"
+"requires external files that are not available.\n"
+"The document class can still be used, but the\n"
+"document cannot be compiled until the following\n"
+"prerequisites are installed:\n"
+"\t%2$s\n"
+"See section 3.1.2.2 (Class Availability) of the\n"
+"User's Guide for more information."
+msgstr ""
+"Vybraná trieda dokumentu\n"
+"\t%1$s\n"
+"požaduje nedostupné externé súbory.\n"
+"Dokumentová trieda sa stále dá používať, ale LyX\n"
+"nebude schopný zrobiť výstup pokiaľ sú\n"
+"nasledujúce predpoklady neinštalované:\n"
+"\t%2$s\n"
+"Pozri na sekciu 3.1.2.2 (Dostupné Triedy) Užívateľskej Príručky pre\n"
+"viac informácií."
+
+#: src/BufferParams.cpp:739
+msgid "Document class not available"
+msgstr "Nedostupná trieda dokumentu"
+
+#: src/BufferParams.cpp:2157 src/Encoding.cpp:246 src/Paragraph.cpp:2662
+#: src/frontends/qt4/LaTeXHighlighter.cpp:122 src/insets/InsetListings.cpp:221
+#: src/insets/InsetListings.cpp:229 src/insets/InsetListings.cpp:252
+#: src/mathed/MathExtern.cpp:1483
+msgid "LyX Warning: "
+msgstr "LyX varovanie: "
+
+#: src/BufferParams.cpp:2158 src/Encoding.cpp:247 src/Paragraph.cpp:2663
+#: src/insets/InsetListings.cpp:222 src/insets/InsetListings.cpp:230
+#: src/mathed/MathExtern.cpp:1484
+msgid "uncodable character"
+msgstr "Nekódovateľný znak"
+
+#: src/BufferParams.cpp:2171
+msgid "Uncodable character in user preamble"
+msgstr "Nekódovateľný znak v preambule používateľa"
+
+#: src/BufferParams.cpp:2173
+#, c-format
+msgid ""
+"The user preamble of your document contains glyphs that are unknown in the "
+"current document encoding (namely %1$s).\n"
+"These glyphs are omitted from the output, which may result in incomplete "
+"output.\n"
+"\n"
+"Please select an appropriate document encoding\n"
+"(such as utf8) or change the preamble code accordingly."
+msgstr ""
+"Preambula vášho dokumentu obsahuje glyfy, ktoré sú neznáme v kódovaní "
+"aktuálneho dokumentu (menovite %1$s).\n"
+"Tieto glyfy budú pri exporte do LaTeX-u vynechané, čo môže končiť neúplnom "
+"výstupe.\n"
+"\n"
+"Vyberte vhodné kódovanie dokumentu (napr. utf8)\n"
+"alebo zmeňte primerane preambulu."
+
+#: src/BufferParams.cpp:2438
+#, c-format
+msgid ""
+"The layout file:\n"
+"%1$s\n"
+"could not be found. A default textclass with default\n"
+"layouts will be used. LyX will not be able to produce\n"
+"correct output."
+msgstr ""
+"Súbor schémy:\n"
+"%1$s\n"
+"sa nedá nájsť. Bude použitá štandardná\n"
+"trieda a schéma. LyX nebude schopný zrobiť\n"
+"správny výstup."
+
+#: src/BufferParams.cpp:2444
+msgid "Document class not found"
+msgstr "Nenájdená trieda dokumentu"
+
+#: src/BufferParams.cpp:2451
+#, c-format
+msgid ""
+"Due to some error in it, the layout file:\n"
+"%1$s\n"
+"could not be loaded. A default textclass with default\n"
+"layouts will be used. LyX will not be able to produce\n"
+"correct output."
+msgstr ""
+"Súbor schémy:\n"
+"%1$s\n"
+"sa kvôli chybe v nej nedá nahrať. Bude použitá štandardná\n"
+"trieda a schéma. LyX nebude schopný zrobiť\n"
+"správny výstup."
+
+#: src/BufferParams.cpp:2457 src/BufferView.cpp:1313 src/BufferView.cpp:1345
+msgid "Could not load class"
+msgstr "Nepodarilo sa nahrať triedu"
+
+#: src/BufferParams.cpp:2510
+msgid "Error reading internal layout information"
+msgstr "Chyba pri čítaní vnútorných informácií pre schému"
+
+#: src/BufferParams.cpp:2511 src/TextClass.cpp:1704 src/TextClass.cpp:1739
+msgid "Read Error"
+msgstr "Chyba pri čítaní"
+
+#: src/BufferView.cpp:192
+msgid "No more insets"
+msgstr "Už nie je viac vložiek"
+
+#: src/BufferView.cpp:769
+msgid "Save bookmark"
+msgstr "Uložiť záložku"
+
+#: src/BufferView.cpp:994
+msgid "Converting document to new document class..."
+msgstr "Prevádzam dokument do novej triedy dokumentov…"
+
+#: src/BufferView.cpp:1039
+msgid "Document is read-only"
+msgstr "Dokument je iba na čítanie"
+
+#: src/BufferView.cpp:1041
+msgid "Document has been modified externally"
+msgstr "Dokument bol externe upravený"
+
+#: src/BufferView.cpp:1050
+msgid "This portion of the document is deleted."
+msgstr "Táto časť dokumentu je vymazaná."
+
+#: src/BufferView.cpp:1093 src/BufferView.cpp:2041
+#: src/frontends/qt4/GuiView.cpp:3686 src/frontends/qt4/GuiView.cpp:3764
+msgid "Absolute filename expected."
+msgstr "Očakáva sa absolútna cesta súboru."
+
+#: src/BufferView.cpp:1311 src/BufferView.cpp:1343
+#, c-format
+msgid "The document class `%1$s' could not be loaded."
+msgstr "Nepodarilo sa nahrať triedu dokumentu `%1$s'."
+
+#: src/BufferView.cpp:1364
+msgid "No further undo information"
+msgstr "Ďalej sa nedá zrušovať"
+
+#: src/BufferView.cpp:1384
+msgid "No further redo information"
+msgstr "Ďalej sa nedá opakovať"
+
+#: src/BufferView.cpp:1608
+msgid "Mark off"
+msgstr "Značka vypnutá"
+
+#: src/BufferView.cpp:1614
+msgid "Mark on"
+msgstr "Značka zapnutá"
+
+#: src/BufferView.cpp:1621
+msgid "Mark removed"
+msgstr "Značka odstránená"
+
+#: src/BufferView.cpp:1624
+msgid "Mark set"
+msgstr "Značka nastavená"
+
+#: src/BufferView.cpp:1680
+msgid "Statistics for the selection:"
+msgstr "Štatistika výberu:"
+
+#: src/BufferView.cpp:1682
+msgid "Statistics for the document:"
+msgstr "Štatistika pre dokument:"
+
+#: src/BufferView.cpp:1685
+#, c-format
+msgid "%1$d words"
+msgstr "%1$d slov"
+
+#: src/BufferView.cpp:1687
+msgid "One word"
+msgstr "Jedno slovo"
+
+#: src/BufferView.cpp:1690
+#, c-format
+msgid "%1$d characters (including blanks)"
+msgstr "%1$d znakov (spolu s medzerami)"
+
+#: src/BufferView.cpp:1693
+msgid "One character (including blanks)"
+msgstr "Jeden znak (aj medzere)"
+
+#: src/BufferView.cpp:1696
+#, c-format
+msgid "%1$d characters (excluding blanks)"
+msgstr "%1$d znakov (bez medzier)"
+
+#: src/BufferView.cpp:1699
+msgid "One character (excluding blanks)"
+msgstr "Jeden znak (bez medzier)"
+
+#: src/BufferView.cpp:1701
+msgid "Statistics"
+msgstr "Štatistika"
+
+#: src/BufferView.cpp:1896
+#, c-format
+msgid ""
+"`inset-forall' interrupted because number of actions is larger than %1$d"
+msgstr "`inset-forall' prerušené lebo počet akcií je väčší ako %1$d"
+
+#: src/BufferView.cpp:1898
+#, c-format
+msgid "Applied \"%1$s\" to %2$d insets"
+msgstr "Aplikované \"%1$s\" na %2$d vložkách"
+
+#: src/BufferView.cpp:1906
+msgid "Branch name"
+msgstr "Meno vetvy"
+
+#: src/BufferView.cpp:1913 src/frontends/qt4/GuiBranches.cpp:218
+msgid "Branch already exists"
+msgstr "Vetva už existuje"
+
+#: src/BufferView.cpp:2765
+#, c-format
+msgid "Inserting document %1$s..."
+msgstr "Vkladám dokument %1$s…"
+
+#: src/BufferView.cpp:2776
+#, c-format
+msgid "Document %1$s inserted."
+msgstr "Dokument %1$s bol vložený."
+
+#: src/BufferView.cpp:2778
+#, c-format
+msgid "Could not insert document %1$s"
+msgstr "Nie je možné vložiť dokument %1$s"
+
+#: src/BufferView.cpp:3182
+#, c-format
+msgid ""
+"Could not read the specified document\n"
+"%1$s\n"
+"due to the error: %2$s"
+msgstr ""
+"Zadaný dokument\n"
+"%1$s\n"
+"sa kvôli chybe: %2$s nedá čítať"
+
+#: src/BufferView.cpp:3184
+msgid "Could not read file"
+msgstr "Nemôžem čítať súbor"
+
+#: src/BufferView.cpp:3191
+#, c-format
+msgid ""
+"%1$s\n"
+" is not readable."
+msgstr ""
+"%1$s\n"
+"je nečitateľné."
+
+#: src/BufferView.cpp:3192 src/output.cpp:39
+msgid "Could not open file"
+msgstr "Nemôžem otvoriť súbor"
+
+#: src/BufferView.cpp:3199
+msgid "Reading not UTF-8 encoded file"
+msgstr "Čítaný súbor nie je kódovaný v UTF-8"
+
+#: src/BufferView.cpp:3200
+msgid ""
+"The file is not UTF-8 encoded.\n"
+"It will be read as local 8Bit-encoded.\n"
+"If this does not give the correct result\n"
+"then please change the encoding of the file\n"
+"to UTF-8 with a program other than LyX.\n"
+msgstr ""
+"Súbor nie je v kódovaní UTF-8.\n"
+"Bude načítaný ako keby bol kódovaný v 8 bitoch.\n"
+"Keď to nedá správny výsledok,\n"
+"zmeňte prosím kódovanie súboru na\n"
+"UTF-8 iným programom.\n"
+
+#: src/Changes.cpp:370
+msgid "Uncodable character in author name"
+msgstr "Nekódovateľný znak v mene autora"
+
+#: src/Changes.cpp:371
+#, c-format
+msgid ""
+"The author name '%1$s',\n"
+"used for change tracking, contains the following glyphs that\n"
+"cannot be represented in the current encoding: %2$s.\n"
+"These glyphs will be omitted in the exported LaTeX file.\n"
+"\n"
+"Choose an appropriate document encoding (such as utf8)\n"
+"or change the spelling of the author name."
+msgstr ""
+"Meno autora '%1$s',\n"
+"použité na sledovanie zmien, obsahuje glyfy,\n"
+"ktoré sa v aktuálnom kódovaní %2$s nedajú reprezentovať.\n"
+"Príslušné glyfy budú pri exporte do LaTeX-u vynechané.\n"
+"\n"
+"Vyberte vhodné kódovanie dokumentu (napr. utf8)\n"
+"alebo zmeňte písanie mena autora."
+
+#: src/Chktex.cpp:59
+#, c-format
+msgid "ChkTeX warning id # %1$s"
+msgstr "Varovanie ChkTeXu id # %1$s"
+
+#: src/Color.cpp:203 src/insets/InsetBibtex.cpp:196
+#: src/insets/InsetBibtex.cpp:215
+msgid "none"
+msgstr "žiadna"
+
+#: src/Color.cpp:204
+msgid "black"
+msgstr "čierna"
+
+#: src/Color.cpp:205
+msgid "white"
+msgstr "biela"
+
+#: src/Color.cpp:206
+msgid "blue"
+msgstr "modrá"
+
+#: src/Color.cpp:207
+msgid "brown"
+msgstr "hnedá"
+
+#: src/Color.cpp:208
+msgid "cyan"
+msgstr "modrozelená"
+
+#: src/Color.cpp:209
+msgid "darkgray"
+msgstr "tmavošedá"
+
+#: src/Color.cpp:210
+msgid "gray"
+msgstr "šedá"
+
+#: src/Color.cpp:211
+msgid "green"
+msgstr "zelená"
+
+#: src/Color.cpp:212
+msgid "lightgray"
+msgstr "svetlošedá"
+
+#: src/Color.cpp:213
+msgid "lime"
+msgstr "svetlozelená"
+
+#: src/Color.cpp:214
+msgid "magenta"
+msgstr "purpurová"
+
+#: src/Color.cpp:215
+msgid "olive"
+msgstr "olivová"
+
+#: src/Color.cpp:216
+msgid "orange"
+msgstr "oranžová"
+
+#: src/Color.cpp:217
+msgid "pink"
+msgstr "ružová"
+
+#: src/Color.cpp:218
+msgid "purple"
+msgstr "nachová"
+
+#: src/Color.cpp:219
+msgid "red"
+msgstr "červená"
+
+#: src/Color.cpp:220
+msgid "teal"
+msgstr "smaragdovozelená"
+
+#: src/Color.cpp:221
+msgid "violet"
+msgstr "fialová"
+
+#: src/Color.cpp:222
+msgid "yellow"
+msgstr "žltá"
+
+#: src/Color.cpp:223
+msgid "cursor"
+msgstr "kurzor"
+
+#: src/Color.cpp:224
+msgid "background"
+msgstr "pozadie"
+
+#: src/Color.cpp:225
+msgid "text"
+msgstr "text"
+
+#: src/Color.cpp:226
+msgid "selection"
+msgstr "výber"
+
+#: src/Color.cpp:227
+msgid "selected text"
+msgstr "vybraný text"
+
+#: src/Color.cpp:229
+msgid "LaTeX text"
+msgstr "LaTeX: text"
+
+#: src/Color.cpp:230
+msgid "inline completion"
+msgstr "priame doplňovanie"
+
+#: src/Color.cpp:232
+msgid "non-unique inline completion"
+msgstr "priame doplňovanie: nejednoznačné"
+
+#: src/Color.cpp:234
+msgid "previewed snippet"
+msgstr "náhľad: útržok"
+
+#: src/Color.cpp:235
+msgid "note label"
+msgstr "poznámka: návestie"
+
+#: src/Color.cpp:236
+msgid "note background"
+msgstr "poznámka: pozadie"
+
+#: src/Color.cpp:237
+msgid "comment label"
+msgstr "komentár: návestie"
+
+#: src/Color.cpp:238
+msgid "comment background"
+msgstr "komentár: pozadie"
+
+#: src/Color.cpp:239
+msgid "greyedout inset label"
+msgstr "zosivelá vložka: návestie"
+
+#: src/Color.cpp:240
+msgid "greyedout inset text"
+msgstr "zosivelá vložka: text"
+
+#: src/Color.cpp:241
+msgid "greyedout inset background"
+msgstr "zosivelá vložka: pozadie"
+
+#: src/Color.cpp:242
+msgid "phantom inset text"
+msgstr "fantómová vložka: text"
+
+#: src/Color.cpp:243
+msgid "shaded box"
+msgstr "tieňovaný rámik"
+
+#: src/Color.cpp:244
+msgid "listings background"
+msgstr "výpisy: pozadie"
+
+#: src/Color.cpp:245
+msgid "branch label"
+msgstr "vetva: návestie"
+
+#: src/Color.cpp:246
+msgid "footnote label"
+msgstr "poznámka pod čiarou: návestie"
+
+#: src/Color.cpp:247
+msgid "index label"
+msgstr "heslo registra: návestie"
+
+#: src/Color.cpp:248
+msgid "margin note label"
+msgstr "okrajová poznámka: návestie"
+
+#: src/Color.cpp:249
+msgid "URL label"
+msgstr "URL: návestie"
+
+#: src/Color.cpp:250
+msgid "URL text"
+msgstr "URL: text"
+
+#: src/Color.cpp:251
+msgid "depth bar"
+msgstr "hĺbkový pruh"
+
+#: src/Color.cpp:252
+msgid "scroll indicator"
+msgstr "rolovacie tlačítko: indikátor"
+
+#: src/Color.cpp:253
+msgid "language"
+msgstr "jazyk"
+
+#: src/Color.cpp:254
+msgid "command inset"
+msgstr "príkazová vložka"
+
+#: src/Color.cpp:255
+msgid "command inset background"
+msgstr "príkazová vložka: pozadie"
+
+#: src/Color.cpp:256
+msgid "command inset frame"
+msgstr "príkazová vložka: rám"
+
+#: src/Color.cpp:257
+msgid "special character"
+msgstr "Špeciálny znak"
+
+#: src/Color.cpp:258
+msgid "math"
+msgstr "matematika"
+
+#: src/Color.cpp:259
+msgid "math background"
+msgstr "matematika: pozadie"
+
+#: src/Color.cpp:260
+msgid "graphics background"
+msgstr "grafika: pozadie"
+
+#: src/Color.cpp:261 src/Color.cpp:265
+msgid "math macro background"
+msgstr "mat. makro: pozadie"
+
+#: src/Color.cpp:262
+msgid "math frame"
+msgstr "matematika: rám"
+
+#: src/Color.cpp:263
+msgid "math corners"
+msgstr "matematický vzorec: rožky"
+
+#: src/Color.cpp:264
+msgid "math line"
+msgstr "matematický riadok"
+
+#: src/Color.cpp:266
+msgid "math macro hovered background"
+msgstr "mat. makro zdvihnuté: pozadie"
+
+#: src/Color.cpp:267
+msgid "math macro label"
+msgstr "mat. makro: návestie"
+
+#: src/Color.cpp:268
+msgid "math macro frame"
+msgstr "mat. makro: rám"
+
+#: src/Color.cpp:269
+msgid "math macro blended out"
+msgstr "mat. makro: vymaskovanie"
+
+#: src/Color.cpp:270
+msgid "math macro old parameter"
+msgstr "mat. makro: starý parameter"
+
+#: src/Color.cpp:271
+msgid "math macro new parameter"
+msgstr "mat. makro: nový parameter"
+
+#: src/Color.cpp:272
+msgid "collapsable inset text"
+msgstr "zbaliteľná vložka: text"
+
+#: src/Color.cpp:273
+msgid "collapsable inset frame"
+msgstr "zbaliteľná vložka: rám"
+
+#: src/Color.cpp:274
+msgid "inset background"
+msgstr "vložka: pozadie"
+
+#: src/Color.cpp:275
+msgid "inset frame"
+msgstr "vložka: rám"
+
+#: src/Color.cpp:276
+msgid "LaTeX error"
+msgstr "LaTeX: chyba"
+
+#: src/Color.cpp:277
+msgid "end-of-line marker"
+msgstr "koniec-riadku: označenie"
+
+#: src/Color.cpp:278
+msgid "appendix marker"
+msgstr "príloha: označenie"
+
+#: src/Color.cpp:279
+msgid "change bar"
+msgstr "revízne označenie"
+
+#: src/Color.cpp:280
+msgid "deleted text"
+msgstr "zmazaný text"
+
+#: src/Color.cpp:281
+msgid "added text"
+msgstr "pridaný text"
+
+#: src/Color.cpp:282
+msgid "changed text 1st author"
+msgstr "revíza - 1. autor"
+
+#: src/Color.cpp:283
+msgid "changed text 2nd author"
+msgstr "revíza - 2. autor"
+
+#: src/Color.cpp:284
+msgid "changed text 3rd author"
+msgstr "revíza - 3. autor"
+
+#: src/Color.cpp:285
+msgid "changed text 4th author"
+msgstr "revíza - 4. autor"
+
+#: src/Color.cpp:286
+msgid "changed text 5th author"
+msgstr "revíza - 5. autor"
+
+#: src/Color.cpp:287
+msgid "deleted text modifier"
+msgstr "zmazaný text: modifikátor"
+
+#: src/Color.cpp:288
+msgid "added space markers"
+msgstr "vložená medzera: označenia"
+
+#: src/Color.cpp:289
+msgid "table line"
+msgstr "tabuľka: línia"
+
+#: src/Color.cpp:290
+msgid "table on/off line"
+msgstr "tabuľka: zap/vyp línia"
+
+#: src/Color.cpp:292
+msgid "bottom area"
+msgstr "dolná oblasť"
+
+#: src/Color.cpp:293
+msgid "new page"
+msgstr "nová stránka"
+
+#: src/Color.cpp:294
+msgid "page break / line break"
+msgstr "zlom strany / zlom riadku"
+
+#: src/Color.cpp:295
+msgid "button frame"
+msgstr "tlačidlo: rám"
+
+#: src/Color.cpp:296
+msgid "button background"
+msgstr "tlačidlo: pozadie"
+
+#: src/Color.cpp:297
+msgid "button background under focus"
+msgstr "tlačidlo: pozadie pod fókusom"
+
+#: src/Color.cpp:298
+msgid "paragraph marker"
+msgstr "odstavec: označenie"
+
+#: src/Color.cpp:299
+msgid "preview frame"
+msgstr "náhľad: rám"
+
+#: src/Color.cpp:300
+msgid "inherit"
+msgstr "zdedené"
+
+#: src/Color.cpp:301
+msgid "regexp frame"
+msgstr "regulárny výraz: rám"
+
+#: src/Color.cpp:302
+msgid "ignore"
+msgstr "ignorovať"
+
+#: src/Converter.cpp:290
+#, c-format
+msgid ""
+"<p>The following LaTeX backend has been configured to allow execution of "
+"external programs for any document:</p><center><p><tt>%1$s</tt></p></"
+"center><p>This is a dangerous configuration. Please, consider using the "
+"support offered by LyX for allowing this privilege only to documents that "
+"actually need it, instead.</p>"
+msgstr ""
+"<p>Nasledovný LaTeX backend bol konfigurovaný aby povolil spúšťanie "
+"externých príkazov pre každý dokument:</p><center><p><tt>%1$s</tt></p></"
+"center><p>Toto je nebezpečná konfigurácia. Namiesto toho prosím uvážte "
+"použiť podporu ponuky LyXa na povolenie oprávnenia len pre dokumenty ktoré "
+"to naozaj potrebujú.<p>"
+
+#: src/Converter.cpp:299
+msgid "Security Warning"
+msgstr "Ochranné Varovanie"
+
+#: src/Converter.cpp:312
+#, c-format
+msgid ""
+"<p>The following LaTeX backend has been requested to allow execution of "
+"external programs:</p><center><p><tt>%1$s</tt></p></center><p>The external "
+"programs can execute arbitrary commands on your system, including dangerous "
+"ones, if instructed to do so by a maliciously crafted LyX document.</p>"
+msgstr ""
+"<p>Nasledovný LaTeX backend bol konfigurovaný aby povolil spúšťanie "
+"externých príkazov:</p><center><p><tt>%1$s</tt></p></center><p>Externý "
+"príkaz je schopný spracovať ľubovoľné rozkazy na vašom systéme, vrátane aj "
+"nebezpečné, keď je napr. inštruovaný robiť to zlovoľne vyrobeným lyx "
+"dokumentom.</p> "
+
+#: src/Converter.cpp:319
+#, c-format
+msgid ""
+"<p>The requested operation requires the use of a converter from %2$s to %3$s:"
+"</p><blockquote><p><tt>%1$s</tt></p></blockquote><p>This external program "
+"can execute arbitrary commands on your system, including dangerous ones, if "
+"instructed to do so by a maliciously crafted LyX document.</p>"
+msgstr ""
+"<p>Žiadaná operácia požaduje konvertor z %2$s na %3$s:</p><blockquote><p><tt>"
+"%1$s</tt></p></blockquote><p>Tento externý program je schopný vykonávať "
+"ľubovoľné akcie, vrátane nebezpečné keď je napr. inštruovaný robiť to "
+"zlovoľne vyrobeným lyx dokumentom.</p> "
+
+#: src/Converter.cpp:297
+msgid "An external converter is disabled for security reasons"
+msgstr "Spúšťanie externého konvertora je z bezpečnostných dôvodov blokované"
+
+#: src/Converter.cpp:299
+msgid ""
+"<p><b>Your current preference settings forbid its execution.</b></p><p>(To "
+"change this setting, go to <i>Preferences ▹ File Handling ▹ "
+"Converters</i> and uncheck <i>Security ▹ Forbid needauth converters</"
+"i>.)"
+msgstr ""
+"<p><b>Vaše súčasné nastavenie blokuje jeho vykonávanie.<b></p><p> (Keď "
+"chcete ich spúšťanie odblokovať, choďte na<i>Nástroje ▹ Preferencie… "
+"▹ Obsluha Súborov</i> a zrušte <i>Bezpečnosť ▹ Zakázať "
+"overovacie konvertory</i>.) "
+
+#: src/Converter.cpp:340
+msgid "A LaTeX backend requires your authorization"
+msgstr "LaTeX backend potrebuje vaše oprávnenie"
+
+#: src/Converter.cpp:308
+msgid "An external converter requires your authorization"
+msgstr "Spúšťanie externého konvertora potrebuje vaše oprávnenie"
+
+#: src/Converter.cpp:344
+msgid ""
+"<p>Should LaTeX backends be allowed to run external programs?</p><p><b>Allow "
+"them only if you trust the origin/sender of the LyX document!</b></p>"
+msgstr ""
+"<p>Chcete aby LaTeX backendy umožňovali spúšťať externé príkazy?</"
+"p><p><b>Povoľte len keď dôverujete pôvodu/odosielateľovi tohto LyX dokumentu!"
+"</b></p> "
+
+#: src/Converter.cpp:311
+msgid ""
+"<p>Would you like to run this converter?</p><p><b>Only run if you trust the "
+"origin/sender of the LyX document!</b></p>"
+msgstr ""
+"<p>Chcete tento konvertor spustiť?</p><p><b>Spustite len keď dôverujete "
+"pôvodu/odosielateľovi tohto LyX dokumentu!</b></p> "
+
+#: src/Converter.cpp:351
+msgid "Do ¬ allow"
+msgstr "&Nepovoliť"
+
+#: src/Converter.cpp:319 src/Converter.cpp:327
+msgid "Do ¬ run"
+msgstr "&Nespustiť"
+
+#: src/Converter.cpp:352
+msgid "A&llow"
+msgstr "Povoliť"
+
+#: src/Converter.cpp:319 src/Converter.cpp:327
+msgid "&Run"
+msgstr "&Spustiť"
+
+#: src/Converter.cpp:354
+msgid "&Always allow for this document"
+msgstr "&Vždy povoliť pre tento dokument"
+
+#: src/Converter.cpp:319
+msgid "&Always run for this document"
+msgstr "&Vždy spustiť pre tento dokument"
+
+#: src/Converter.cpp:383 src/Converter.cpp:589 src/Converter.cpp:612
+#: src/Converter.cpp:655
+msgid "Cannot convert file"
+msgstr "Nie je možné konvertovať súbor"
+
+#: src/Converter.cpp:384
+#, c-format
+msgid ""
+"No information for converting %1$s format files to %2$s.\n"
+"Define a converter in the preferences."
+msgstr ""
+"Žiadne informácie pre konverziu %1$s formátnych súborov do %2$s.\n"
+"Definujte konvertor v preferenciách."
+
+#: src/Converter.cpp:537 src/Format.cpp:722 src/Format.cpp:793
+msgid "Executing command: "
+msgstr "Vykonávam príkaz: "
+
+#: src/Converter.cpp:584
+msgid "Build errors"
+msgstr "Chyby pri vytváraní"
+
+#: src/Converter.cpp:585
+msgid "There were errors during the build process."
+msgstr "Počas spracovania sa vyskytli chyby."
+
+#: src/Converter.cpp:590
+#, c-format
+msgid ""
+"An error occurred while running:\n"
+"%1$s"
+msgstr ""
+"Chyba pri spracovaní:\n"
+"%1$s"
+
+#: src/Converter.cpp:613
+#, c-format
+msgid "Could not move a temporary directory from %1$s to %2$s."
+msgstr "Pomocný adresár %1$s sa nedal presunúť na %2$s."
+
+#: src/Converter.cpp:657
+#, c-format
+msgid "Could not copy a temporary file from %1$s to %2$s."
+msgstr "Nedá sa skopírovať pomocný súbor z %1$s do %2$s."
+
+#: src/Converter.cpp:658
+#, c-format
+msgid "Could not move a temporary file from %1$s to %2$s."
+msgstr "Nedá sa presunúť pomocný súbor z %1$s do %2$s."
+
+#: src/Converter.cpp:714
+msgid "Running LaTeX..."
+msgstr "Spúšťam LaTeX…"
+
+#: src/Converter.cpp:736
+#, c-format
+msgid ""
+"LaTeX did not run successfully. Additionally, LyX could not locate the LaTeX "
+"log %1$s."
+msgstr ""
+"LaTeX neprebehol úspešne. Čo viac, LyX nenašiel výstup pre protokol LaTeX-u "
+"%1$s."
+
+#: src/Converter.cpp:739 src/Converter.cpp:746
+msgid "LaTeX failed"
+msgstr "LaTeX zlyhal"
+
+#: src/Converter.cpp:742
+#, c-format
+msgid ""
+"The external program\n"
+"%1$s\n"
+"finished with an error. It is recommended you fix the cause of the external "
+"program's error (check the logs). "
+msgstr ""
+"Externý program\n"
+"%1$s\n"
+"končil s chybou. Odporúča sa upraviť príčinu chyby externého programu "
+"(skontrolujte hlásenia). "
+
+#: src/Converter.cpp:748
+msgid "Output is empty"
+msgstr "Výstup je prázdny"
+
+#: src/Converter.cpp:749
+msgid "No output file was generated."
+msgstr "Výstupný súbor nebol generovaný."
+
+#: src/Cursor.cpp:2117 src/Text.cpp:1946
+msgid ", Inset: "
+msgstr ", Vložka: "
+
+#: src/Cursor.cpp:2118
+msgid ", Cell: "
+msgstr ", Bunka: "
+
+#: src/Cursor.cpp:2119 src/Text.cpp:1949
+msgid ", Position: "
+msgstr ", Pozícia: "
+
+#: src/CutAndPaste.cpp:370
+#, c-format
+msgid ""
+"The pasted branch \"%1$s\" is undefined.\n"
+"Do you want to add it to the document's branch list?"
+msgstr ""
+"Vlepená vetva %1$s nie je definovaná.\n"
+"Chcete ju uložiť do zoznamu vetiev tohto dokumentu?"
+
+#: src/CutAndPaste.cpp:373
+msgid "Unknown branch"
+msgstr "Neznáma vetva"
+
+#: src/CutAndPaste.cpp:374
+msgid "&Don't Add"
+msgstr "&Nepridať"
+
+#: src/CutAndPaste.cpp:762 src/Text.cpp:393
+#, c-format
+msgid "Layout `%1$s' was not found."
+msgstr "Schéma `%1$s' sa nenašla."
+
+#: src/CutAndPaste.cpp:763 src/Text.cpp:394
+msgid "Layout Not Found"
+msgstr "Schéma Nenájdená"
+
+#: src/CutAndPaste.cpp:791
+#, c-format
+msgid "Flex inset %1$s is undefined after reloading `%2$s' layout."
+msgstr "Flexibilná vložka %1$s nie je definovaná po načítaní schémy `%2$s'."
+
+#: src/CutAndPaste.cpp:794
+#, c-format
+msgid ""
+"Flex inset %1$s is undefined because of conversion from `%2$s' layout to `"
+"%3$s'."
+msgstr ""
+"Flexibilná vložka %1$s nie je definovaná kvôli konverzii z schémy `%2$s' na `"
+"%3$s'."
+
+#: src/CutAndPaste.cpp:799
+msgid "Undefined flex inset"
+msgstr "Nedefinované flexibilná vložka"
+
+#: src/Exporter.cpp:45
+#, c-format
+msgid ""
+"The file %1$s already exists.\n"
+"\n"
+"Do you want to overwrite that file?"
+msgstr ""
+"Súbor %1$s už existuje.\n"
+"\n"
+"Chcete tento súbor prepísať?"
+
+#: src/Exporter.cpp:48
+msgid "Overwrite file?"
+msgstr "Prepísať súbor?"
+
+#: src/Exporter.cpp:50
+msgid "&Keep file"
+msgstr "Súbor &držať"
+
+#: src/Exporter.cpp:51
+msgid "Overwrite &all"
+msgstr "Prepísať &všetko"
+
+#: src/Exporter.cpp:51
+msgid "&Cancel export"
+msgstr "&Zrušiť export"
+
+#: src/Exporter.cpp:97
+msgid "Couldn't copy file"
+msgstr "Nemožné kopírovať súbor"
+
+#: src/Exporter.cpp:98
+#, c-format
+msgid "Copying %1$s to %2$s failed."
+msgstr "Kopírovanie %1$s do %2$s zlyhalo."
+
+#: src/Font.cpp:60 src/frontends/qt4/GuiCharacter.cpp:137
+#: src/frontends/qt4/GuiDocument.cpp:4120 src/frontends/qt4/GuiListings.cpp:161
+msgid "Roman"
+msgstr "Serifové"
+
+#: src/Font.cpp:60 src/frontends/qt4/GuiCharacter.cpp:138
+#: src/frontends/qt4/GuiDocument.cpp:4120 src/frontends/qt4/GuiListings.cpp:161
+msgid "Sans Serif"
+msgstr "Bezserifové"
+
+#: src/Font.cpp:60 src/frontends/qt4/GuiCharacter.cpp:139
+#: src/frontends/qt4/GuiDocument.cpp:4120 src/frontends/qt4/GuiListings.cpp:161
+msgid "Typewriter"
+msgstr "Strojopis"
+
+#: src/Font.cpp:60
+msgid "Symbol"
+msgstr "Symbol"
+
+#: src/Font.cpp:62 src/Font.cpp:65 src/Font.cpp:68 src/Font.cpp:74
+#: src/Font.cpp:77
+msgid "Inherit"
+msgstr "Zdedené"
+
+#: src/Font.cpp:65 src/frontends/qt4/GuiCharacter.cpp:126
+msgid "Medium"
+msgstr "Stredné"
+
+#: src/Font.cpp:68 src/frontends/qt4/GuiCharacter.cpp:50
+msgid "Upright"
+msgstr "Vzpriamený"
+
+#: src/Font.cpp:68 src/frontends/qt4/GuiCharacter.cpp:51
+msgid "Italic"
+msgstr "Kurzíva (italic)"
+
+#: src/Font.cpp:68 src/frontends/qt4/GuiCharacter.cpp:52
+msgid "Slanted"
+msgstr "Sklonený"
+
+#: src/Font.cpp:68
+msgid "Smallcaps"
+msgstr "Kapitálky"
+
+#: src/Font.cpp:73 src/frontends/qt4/GuiCharacter.cpp:73
+msgid "Increase"
+msgstr "Zväčšiť"
+
+#: src/Font.cpp:73 src/frontends/qt4/GuiCharacter.cpp:74
+msgid "Decrease"
+msgstr "Zmenšiť"
+
+#: src/Font.cpp:77
+msgid "Toggle"
+msgstr "Prepnúť"
+
+#: src/Font.cpp:163
+#, c-format
+msgid "Emphasis %1$s, "
+msgstr "Zvýrazniť %1$s, "
+
+#: src/Font.cpp:166
+#, c-format
+msgid "Underline %1$s, "
+msgstr "Podčiarknuť %1$s, "
+
+#: src/Font.cpp:169
+#, c-format
+msgid "Strike out %1$s, "
+msgstr "Preškrtnúť %1$s, "
+
+#: src/Font.cpp:172
+#, c-format
+msgid "Cross out %1$s, "
+msgstr "Šikmo začiarkovať %1$s, "
+
+#: src/Font.cpp:175
+#, c-format
+msgid "Double underline %1$s, "
+msgstr "Dvojito podčiarknuť %1$s, "
+
+#: src/Font.cpp:178
+#, c-format
+msgid "Wavy underline %1$s, "
+msgstr "Vlnovkou podčiarknuté %1$s, "
+
+#: src/Font.cpp:181
+#, c-format
+msgid "Noun %1$s, "
+msgstr "Meno %1$s, "
+
+#: src/Font.cpp:195
+#, c-format
+msgid "Language: %1$s, "
+msgstr "Jazyk: %1$s, "
+
+#: src/Font.cpp:198
+#, c-format
+msgid "Number %1$s"
+msgstr "Číslo %1$s"
+
+#: src/Format.cpp:668 src/Format.cpp:681 src/Format.cpp:691
+msgid "Cannot view file"
+msgstr "Nemôžem zobraziť súbor"
+
+#: src/Format.cpp:669 src/Format.cpp:739 src/frontends/qt4/GuiView.cpp:3414
+#, c-format
+msgid "File does not exist: %1$s"
+msgstr "Súbor neexistuje: %1$s"
+
+#: src/Format.cpp:682
+#, c-format
+msgid "No information for viewing %1$s"
+msgstr "Žiadne informácie pre prezeranie %1$s"
+
+#: src/Format.cpp:692
+#, c-format
+msgid "Auto-view file %1$s failed"
+msgstr "Automatický prehľad súboru %1$s sa nepodaril"
+
+#: src/Format.cpp:738 src/Format.cpp:750 src/Format.cpp:763 src/Format.cpp:774
+msgid "Cannot edit file"
+msgstr "Nemôžem editovať súbor"
+
+#: src/Format.cpp:751
+msgid "LinkBack files can only be edited on Apple Mac OSX."
+msgstr "Súbory LinkBack je možné editovať len na Apple Mac OSX."
+
+#: src/Format.cpp:764
+#, c-format
+msgid "No information for editing %1$s"
+msgstr "Žiadne informácie pre editáciu %1$s"
+
+#: src/Format.cpp:775
+#, c-format
+msgid "Auto-edit file %1$s failed"
+msgstr "Automatická editácia súboru %1$s zlyhala"
+
+#: src/KeyMap.cpp:229 src/KeyMap.cpp:244
+msgid "Could not find bind file"
+msgstr "Nemôžem nájsť súbor skratiek"
+
+#: src/KeyMap.cpp:230
+#, c-format
+msgid ""
+"Unable to find the bind file\n"
+"%1$s.\n"
+"Please check your installation."
+msgstr ""
+"Nemôžem nájsť súbor skratiek\n"
+"%1$s.\n"
+"Skontrolujte prosím vašu inštaláciu."
+
+#: src/KeyMap.cpp:237
+msgid "Could not find `cua.bind' file"
+msgstr "Nemôžem nájsť súbor `cua.bind'"
+
+#: src/KeyMap.cpp:238
+msgid ""
+"Unable to find the default bind file `cua.bind'.\n"
+"Please check your installation."
+msgstr ""
+"LyX nenašiel predvolený súbor skratiek `cua.bind'.\n"
+"Skontrolujte prosím vašu inštaláciu."
+
+#: src/KeyMap.cpp:245
+#, c-format
+msgid ""
+"Unable to find the bind file\n"
+"%1$s.\n"
+"Falling back to default."
+msgstr ""
+"Nemôžem nájsť súbor skratiek\n"
+"%1$s.\n"
+"Ustupujem na štandard."
+
+#: src/KeySequence.cpp:181
+msgid " options: "
+msgstr " voľby: "
+
+#: src/LaTeX.cpp:58
+#, c-format
+msgid "Waiting for LaTeX run number %1$d"
+msgstr "Čakanie na %1$d spracovanie LaTeX-u"
+
+#: src/LaTeX.cpp:280 src/LaTeX.cpp:382
+msgid "Running Index Processor."
+msgstr "Spúšťam generáciu registra."
+
+#: src/LaTeX.cpp:311 src/LaTeX.cpp:362
+msgid "Running BibTeX."
+msgstr "Spúšťam BibTeX."
+
+#: src/LaTeX.cpp:481
+msgid "Running MakeIndex for nomencl."
+msgstr "Spúšťam MakeIndex pre nomencl."
+
+#: src/LaTeX.cpp:1320 src/LaTeX.cpp:1326 src/LaTeX.cpp:1335
+msgid "BibTeX error: "
+msgstr "BibTeX chyba: "
+
+#: src/LaTeX.cpp:1342
+msgid "Biber error: "
+msgstr "Biber chyba: "
+
+#: src/LaTeXFonts.cpp:221 src/LaTeXFonts.cpp:290
+msgid "Font not available"
+msgstr "Font nie je dostupný"
+
+#: src/LaTeXFonts.cpp:222 src/LaTeXFonts.cpp:291
+#, c-format
+msgid ""
+"The LaTeX package `%1$s' needed for the font `%2$s'\n"
+"is not available on your system. LyX will fall back to the default font."
+msgstr ""
+"Balík LaTeX-a `%1$s' ktorý font `%2$s potrebuje\n"
+"nie je dostupný na vašom systéme. LyX sa stiahne na štandardný font."
+
+#: src/LyX.cpp:148
+msgid "Could not read configuration file"
+msgstr "Nemôžem čítať konfiguračný súbor"
+
+#: src/LyX.cpp:149
+#, c-format
+msgid ""
+"Error while reading the configuration file\n"
+"%1$s.\n"
+"Please check your installation."
+msgstr ""
+"Chyba pri čítaní konfiguračného súboru\n"
+"%1$s.\n"
+"Skontrolujte prosím vašu inštaláciu."
+
+#: src/LyX.cpp:402
+msgid "The following files could not be loaded:"
+msgstr "Nasledovné súbory sa nedali nahrať:"
+
+#: src/LyX.cpp:439
+#, c-format
+msgid "%1$s does not appear like a LyX created temporary directory."
+msgstr "%1$s nevyzerá ako pomocný adresár vytvorený LyXom."
+
+#: src/LyX.cpp:441
+msgid "Cannot remove temporary directory"
+msgstr "Nedá sa zmazať pomocný adresár"
+
+#: src/LyX.cpp:446
+#, c-format
+msgid "Unable to remove the temporary directory %1$s"
+msgstr "Nedá sa zmazať pomocný adresár %1$s"
+
+#: src/LyX.cpp:475
+#, c-format
+msgid "Wrong command line option `%1$s'. Exiting."
+msgstr "Zlá voľba v príkazovom riadku `%1$s'. Končím."
+
+#: src/LyX.cpp:493
+msgid "Missing filename for this operation."
+msgstr "Chýbajúci názov súboru pre túto operáciu."
+
+#: src/LyX.cpp:542
+#, c-format
+msgid "LyX failed to load the following file: %1$s"
+msgstr "LyX zlyhal načítať nasledujúci súbor: %1$s"
+
+#: src/LyX.cpp:589
+msgid "No textclass is found"
+msgstr "Nenašiel sa žiadny súbor tried (textclass)"
+
+#: src/LyX.cpp:590
+msgid ""
+"LyX will only have minimal functionality because no textclasses have been "
+"found. You can either try to reconfigure LyX normally, try to reconfigure "
+"without checking your LaTeX installation, or continue."
+msgstr ""
+"LyX bude mať len minimálnu funkčnosť lebo sa nenašli žiadne súbory tried. "
+"Môžte skúsiť normálnu rekonfiguráciu, alebo rekonfigurovať bez kontrolovania "
+"vašej LaTeX-inštalácie, alebo pokračovať."
+
+#: src/LyX.cpp:594
+msgid "&Reconfigure"
+msgstr "&Rekonfigurácia"
+
+#: src/LyX.cpp:595
+msgid "&Without LaTeX"
+msgstr "&Bez použitia LaTeX-a"
+
+#: src/LyX.cpp:596 src/VCBackend.cpp:966 src/VCBackend.cpp:970
+msgid "&Continue"
+msgstr "&Pokračovať"
+
+#: src/LyX.cpp:699
+msgid ""
+"SIGHUP signal caught!\n"
+"Bye."
+msgstr ""
+"Zachytený signál SIGHUP!\n"
+"Ahoj."
+
+#: src/LyX.cpp:703
+msgid ""
+"SIGFPE signal caught!\n"
+"Bye."
+msgstr ""
+"Zachytený signál SIGFPE!\n"
+"Ahoj."
+
+#: src/LyX.cpp:706
+msgid ""
+"SIGSEGV signal caught!\n"
+"Sorry, you have found a bug in LyX, hope you have not lost any data.\n"
+"Please read the bug-reporting instructions in 'Help->Introduction' and send "
+"us a bug report, if necessary. Thanks!\n"
+"Bye."
+msgstr ""
+"Zachytený signál SIGSEGV!\n"
+"Ľutujem, našli ste chybu v LyXe, dúfam že ste nestratili žiadne dáta.\n"
+"Prečítajte si prosím údaje pre oznámenie chyby v 'Pomocník -> Úvod' a keď "
+"treba, pošlite nám to oznámenie. Ďakujem!\n"
+"Ahoj."
+
+#: src/LyX.cpp:722
+msgid "LyX crashed!"
+msgstr "LyX havaroval!"
+
+#: src/LyX.cpp:756
+msgid "LyX: "
+msgstr "LyX: "
+
+#: src/LyX.cpp:1005
+msgid "Could not create temporary directory"
+msgstr "Nedá sa vytvoriť pomocný adresár"
+
+#: src/LyX.cpp:1006
+#, c-format
+msgid ""
+"Could not create a temporary directory in\n"
+"\"%1$s\"\n"
+"Make sure that this path exists and is writable and try again."
+msgstr ""
+"Nedá sa vytvoriť pomocný adresár v\n"
+"\"%1$s\"\n"
+"Zaistite, že táto cesta existuje a má práva na zápis. Potom to skúste znovu."
+
+#: src/LyX.cpp:1070
+msgid "Missing user LyX directory"
+msgstr "Chýba užívateľský adresár LyX-u"
+
+#: src/LyX.cpp:1071
+#, c-format
+msgid ""
+"You have specified a non-existent user LyX directory, %1$s.\n"
+"It is needed to keep your own configuration."
+msgstr ""
+"Uviedli ste neexistujúci užívateľský adresár LyX-u, %1$s.\n"
+"Je potrebný k zachovaniu vašej konfigurácii."
+
+#: src/LyX.cpp:1076
+msgid "&Create directory"
+msgstr "V&ytvoriť adresár"
+
+#: src/LyX.cpp:1077
+msgid "&Exit LyX"
+msgstr "&Ukončiť LyX"
projects / lyx.git / blobdiff