+#: src/Color.cpp:302
+msgid "ignore"
+msgstr "ignorovať"
+
+#: src/Converter.cpp:294
+#, c-format
+msgid ""
+"<p>The following LaTeX backend has been configured to allow execution of "
+"external programs for any document:</p><center><p><tt>%1$s</tt></p></"
+"center><p>This is a dangerous configuration. Please, consider using the "
+"support offered by LyX for allowing this privilege only to documents that "
+"actually need it, instead.</p>"
+msgstr ""
+"<p>Nasledovný LaTeX backend bol konfigurovaný aby povolil spúšťanie "
+"externých príkazov pre každý dokument:</p><center><p><tt>%1$s</tt></p></"
+"center><p>Toto je nebezpečná konfigurácia. Namiesto toho prosím uvážte "
+"použiť podporu ponuky LyXa na povolenie oprávnenia len pre dokumenty ktoré "
+"to naozaj potrebujú.<p>"
+
+#: src/Converter.cpp:303
+msgid "Security Warning"
+msgstr "Ochranné Varovanie"
+
+#: src/Converter.cpp:316
+#, c-format
+msgid ""
+"<p>The following LaTeX backend has been requested to allow execution of "
+"external programs:</p><center><p><tt>%1$s</tt></p></center><p>The external "
+"programs can execute arbitrary commands on your system, including dangerous "
+"ones, if instructed to do so by a maliciously crafted LyX document.</p>"
+msgstr ""
+"<p>Nasledovný LaTeX backend bol konfigurovaný aby povolil spúšťanie "
+"externých príkazov:</p><center><p><tt>%1$s</tt></p></center><p>Externý "
+"príkaz je schopný spracovať ľubovoľné rozkazy na vašom systéme, vrátane aj "
+"nebezpečné, keď je napr. inštruovaný robiť to zlovoľne vyrobeným lyx "
+"dokumentom.</p> "
+
+#: src/Converter.cpp:323
+#, c-format
+msgid ""
+"<p>The requested operation requires the use of a converter from %2$s to %3$s:"
+"</p><blockquote><p><tt>%1$s</tt></p></blockquote><p>This external program "
+"can execute arbitrary commands on your system, including dangerous ones, if "
+"instructed to do so by a maliciously crafted LyX document.</p>"
+msgstr ""
+"<p>Žiadaná operácia požaduje konvertor z %2$s na %3$s:</p><blockquote><p><tt>"
+"%1$s</tt></p></blockquote><p>Tento externý program je schopný vykonávať "
+"ľubovoľné akcie, vrátane nebezpečné keď je napr. inštruovaný robiť to "
+"zlovoľne vyrobeným lyx dokumentom.</p> "
+
+#: src/Converter.cpp:333
+msgid "An external converter is disabled for security reasons"
+msgstr "Spúšťanie externého konvertora je z bezpečnostných dôvodov blokované"
+
+#: src/Converter.cpp:335
+msgid ""
+"<p><b>Your current preference settings forbid its execution.</b></p><p>(To "
+"change this setting, go to <i>Preferences ▹ File Handling ▹ "
+"Converters</i> and uncheck <i>Security ▹ Forbid needauth converters</"
+"i>.)"
+msgstr ""
+"<p><b>Vaše súčasné nastavenie blokuje jeho vykonávanie.<b></p><p> (Keď "
+"chcete ich spúšťanie odblokovať, choďte na<i>Nástroje ▹ Preferencie… "
+"▹ Obsluha Súborov</i> a zrušte <i>Bezpečnosť ▹ Zakázať "
+"overovacie konvertory</i>.) "
+
+#: src/Converter.cpp:344
+msgid "A LaTeX backend requires your authorization"
+msgstr "LaTeX backend potrebuje vaše oprávnenie"
+
+#: src/Converter.cpp:345
+msgid "An external converter requires your authorization"
+msgstr "Spúšťanie externého konvertora potrebuje vaše oprávnenie"
+
+#: src/Converter.cpp:348
+msgid ""
+"<p>Should LaTeX backends be allowed to run external programs?</p><p><b>Allow "
+"them only if you trust the origin/sender of the LyX document!</b></p>"
+msgstr ""
+"<p>Chcete aby LaTeX backendy umožňovali spúšťať externé príkazy?</"
+"p><p><b>Povoľte len keď dôverujete pôvodu/odosielateľovi tohto LyX dokumentu!"
+"</b></p> "
+
+#: src/Converter.cpp:351
+msgid ""
+"<p>Would you like to run this converter?</p><p><b>Only run if you trust the "
+"origin/sender of the LyX document!</b></p>"
+msgstr ""
+"<p>Chcete tento konvertor spustiť?</p><p><b>Spustite len keď dôverujete "
+"pôvodu/odosielateľovi tohto LyX dokumentu!</b></p> "
+
+#: src/Converter.cpp:355
+msgid "Do ¬ allow"
+msgstr "&Nepovoliť"
+
+#: src/Converter.cpp:355
+msgid "Do ¬ run"
+msgstr "&Nespustiť"
+
+#: src/Converter.cpp:356
+msgid "A&llow"
+msgstr "Povoliť"
+
+#: src/Converter.cpp:356
+msgid "&Run"
+msgstr "&Spustiť"
+
+#: src/Converter.cpp:358
+msgid "&Always allow for this document"
+msgstr "&Vždy povoliť pre tento dokument"
+
+#: src/Converter.cpp:359
+msgid "&Always run for this document"
+msgstr "&Vždy spustiť pre tento dokument"
+
+#: src/Converter.cpp:437 src/Converter.cpp:682 src/Converter.cpp:705
+#: src/Converter.cpp:748
+msgid "Cannot convert file"
+msgstr "Nie je možné konvertovať súbor"
+
+#: src/Converter.cpp:438
+#, c-format
+msgid ""
+"No information for converting %1$s format files to %2$s.\n"
+"Define a converter in the preferences."
+msgstr ""
+"Žiadne informácie pre konverziu %1$s formátnych súborov do %2$s.\n"
+"Definujte konvertor v preferenciách."
+
+#: src/Converter.cpp:540 src/frontends/qt4/GuiDocument.cpp:1633
+msgid "Pygments driver command not found!"
+msgstr "Nenašiel som príkaz pre ovládač 'pygments'!"
+
+#: src/Converter.cpp:541 src/frontends/qt4/GuiDocument.cpp:1634
+msgid ""
+"The driver command necessary to use the minted package\n"
+"(pygmentize) has not been found. Make sure you have\n"
+"the python-pygments module installed or, if the driver\n"
+"is named differently, to add the following line to the\n"
+"document preamble:\n"
+"\n"
+"\\AtBeginDocument{\\renewcommand{\\MintedPygmentize}{driver}}\n"
+"\n"
+"where 'driver' is name of the driver command."
+msgstr ""
+"Príkaz ovládača, potrebný na použite minted-balíka\n"
+"(pygmentize) nebol nájdený. Zaistite že máte\n"
+"python-pygments-modul nainštalovaný alebo, keď ovládač\n"
+"je ináč pomenovaný, pridajte nasledovný riadok\n"
+"do preambuly:\n"
+"\n"
+"\\AtBeginDocument{\\renewcommand{\\MintedPygmentize}{ovládač}}\n"
+"\n"
+"kde 'ovládač' je názov príkazu ovládača."
+
+#: src/Converter.cpp:630 src/Format.cpp:722 src/Format.cpp:793
+msgid "Executing command: "
+msgstr "Vykonávam príkaz: "
+
+#: src/Converter.cpp:677
+msgid "Build errors"
+msgstr "Chyby pri vytváraní"
+
+#: src/Converter.cpp:678
+msgid "There were errors during the build process."
+msgstr "Počas spracovania sa vyskytli chyby."
+
+#: src/Converter.cpp:683
+#, c-format
+msgid ""
+"An error occurred while running:\n"
+"%1$s"
+msgstr ""
+"Chyba pri spracovaní:\n"
+"%1$s"
+
+#: src/Converter.cpp:706
+#, c-format
+msgid "Could not move a temporary directory from %1$s to %2$s."
+msgstr "Pomocný adresár %1$s sa nedal presunúť na %2$s."
+
+#: src/Converter.cpp:750
+#, c-format
+msgid "Could not copy a temporary file from %1$s to %2$s."
+msgstr "Nedá sa skopírovať pomocný súbor z %1$s do %2$s."
+
+#: src/Converter.cpp:751
+#, c-format
+msgid "Could not move a temporary file from %1$s to %2$s."
+msgstr "Nedá sa presunúť pomocný súbor z %1$s do %2$s."
+
+#: src/Converter.cpp:793
+msgid "Running LaTeX..."
+msgstr "Spúšťam LaTeX…"
+
+#: src/Converter.cpp:819
+#, c-format
+msgid ""
+"LaTeX did not run successfully. Additionally, LyX could not locate the LaTeX "
+"log %1$s."
+msgstr ""
+"LaTeX neprebehol úspešne. Čo viac, LyX nenašiel výstup pre protokol LaTeX-u "
+"%1$s."
+
+#: src/Converter.cpp:822 src/Converter.cpp:829
+msgid "LaTeX failed"
+msgstr "LaTeX zlyhal"
+
+#: src/Converter.cpp:825
+#, c-format
+msgid ""
+"The external program\n"
+"%1$s\n"
+"finished with an error. It is recommended you fix the cause of the external "
+"program's error (check the logs). "
+msgstr ""
+"Externý program\n"
+"%1$s\n"
+"končil s chybou. Odporúča sa upraviť príčinu chyby externého programu "
+"(skontrolujte hlásenia). "
+
+#: src/Converter.cpp:831
+msgid "Output is empty"
+msgstr "Výstup je prázdny"
+
+#: src/Converter.cpp:832
+msgid "No output file was generated."
+msgstr "Výstupný súbor nebol generovaný."
+
+#: src/Cursor.cpp:1075 src/Text.cpp:1957
+msgid ", Inset: "
+msgstr ", Vložka: "
+
+#: src/Cursor.cpp:1076
+msgid ", Cell: "
+msgstr ", Bunka: "
+
+#: src/Cursor.cpp:1077 src/Text.cpp:1960
+msgid ", Position: "
+msgstr ", Pozícia: "
+
+#: src/CutAndPaste.cpp:370
+#, c-format
+msgid ""
+"The pasted branch \"%1$s\" is undefined.\n"
+"Do you want to add it to the document's branch list?"
+msgstr ""
+"Vlepená vetva %1$s nie je definovaná.\n"
+"Chcete ju uložiť do zoznamu vetiev tohto dokumentu?"
+
+#: src/CutAndPaste.cpp:373
+msgid "Unknown branch"
+msgstr "Neznáma vetva"
+
+#: src/CutAndPaste.cpp:374
+msgid "&Don't Add"
+msgstr "&Nepridať"
+
+#: src/CutAndPaste.cpp:760 src/Text.cpp:393
+#, c-format
+msgid "Layout `%1$s' was not found."
+msgstr "Schéma `%1$s' sa nenašla."
+
+#: src/CutAndPaste.cpp:761 src/Text.cpp:394
+msgid "Layout Not Found"
+msgstr "Schéma Nenájdená"
+
+#: src/CutAndPaste.cpp:789
+#, c-format
+msgid "Flex inset %1$s is undefined after reloading `%2$s' layout."
+msgstr "Flexibilná vložka %1$s nie je definovaná po načítaní schémy `%2$s'."
+
+#: src/CutAndPaste.cpp:792
+#, c-format
+msgid ""
+"Flex inset %1$s is undefined because of conversion from `%2$s' layout to `"
+"%3$s'."
+msgstr ""
+"Flexibilná vložka %1$s nie je definovaná kvôli konverzii z schémy `%2$s' na `"
+"%3$s'."
+
+#: src/CutAndPaste.cpp:797
+msgid "Undefined flex inset"
+msgstr "Nedefinované flexibilná vložka"
+
+#: src/Exporter.cpp:45
+#, c-format
+msgid ""
+"The file %1$s already exists.\n"
+"\n"
+"Do you want to overwrite that file?"
+msgstr ""
+"Súbor %1$s už existuje.\n"
+"\n"
+"Chcete tento súbor prepísať?"
+
+#: src/Exporter.cpp:48
+msgid "Overwrite file?"
+msgstr "Prepísať súbor?"
+
+#: src/Exporter.cpp:50
+msgid "&Keep file"
+msgstr "Súbor &držať"
+
+#: src/Exporter.cpp:51
+msgid "Overwrite &all"
+msgstr "Prepísať &všetko"
+
+#: src/Exporter.cpp:51
+msgid "&Cancel export"
+msgstr "&Zrušiť export"
+
+#: src/Exporter.cpp:97
+msgid "Couldn't copy file"
+msgstr "Nemožné kopírovať súbor"
+
+#: src/Exporter.cpp:98
+#, c-format
+msgid "Copying %1$s to %2$s failed."
+msgstr "Kopírovanie %1$s do %2$s zlyhalo."
+
+#: src/Font.cpp:60 src/frontends/qt4/GuiCharacter.cpp:137
+#: src/frontends/qt4/GuiDocument.cpp:4202 src/frontends/qt4/GuiListings.cpp:161
+msgid "Roman"
+msgstr "Serifové"
+
+#: src/Font.cpp:60 src/frontends/qt4/GuiCharacter.cpp:138
+#: src/frontends/qt4/GuiDocument.cpp:4202 src/frontends/qt4/GuiListings.cpp:161
+msgid "Sans Serif"
+msgstr "Bezserifové"
+
+#: src/Font.cpp:60 src/frontends/qt4/GuiCharacter.cpp:139
+#: src/frontends/qt4/GuiDocument.cpp:4202 src/frontends/qt4/GuiListings.cpp:161
+msgid "Typewriter"
+msgstr "Strojopis"
+
+#: src/Font.cpp:60
+msgid "Symbol"
+msgstr "Symbol"
+
+#: src/Font.cpp:62 src/Font.cpp:65 src/Font.cpp:68 src/Font.cpp:74
+#: src/Font.cpp:77
+msgid "Inherit"
+msgstr "Zdedené"
+
+#: src/Font.cpp:65 src/frontends/qt4/GuiCharacter.cpp:126
+msgid "Medium"
+msgstr "Stredné"
+
+#: src/Font.cpp:68 src/frontends/qt4/GuiCharacter.cpp:50
+msgid "Upright"
+msgstr "Vzpriamený"
+
+#: src/Font.cpp:68 src/frontends/qt4/GuiCharacter.cpp:51
+msgid "Italic"
+msgstr "Kurzíva (italic)"
+
+#: src/Font.cpp:68 src/frontends/qt4/GuiCharacter.cpp:52
+msgid "Slanted"
+msgstr "Sklonený"
+
+#: src/Font.cpp:68
+msgid "Smallcaps"
+msgstr "Kapitálky"
+
+#: src/Font.cpp:73 src/frontends/qt4/GuiCharacter.cpp:73
+msgid "Increase"
+msgstr "Zväčšiť"
+
+#: src/Font.cpp:73 src/frontends/qt4/GuiCharacter.cpp:74
+msgid "Decrease"
+msgstr "Zmenšiť"
+
+#: src/Font.cpp:77
+msgid "Toggle"
+msgstr "Prepnúť"
+
+#: src/Font.cpp:163
+#, c-format
+msgid "Emphasis %1$s, "
+msgstr "Zvýrazniť %1$s, "
+
+#: src/Font.cpp:166
+#, c-format
+msgid "Underline %1$s, "
+msgstr "Podčiarknuť %1$s, "
+
+#: src/Font.cpp:169
+#, c-format
+msgid "Strike out %1$s, "
+msgstr "Preškrtnúť %1$s, "
+
+#: src/Font.cpp:172
+#, c-format
+msgid "Cross out %1$s, "
+msgstr "Šikmo začiarkovať %1$s, "
+
+#: src/Font.cpp:175
+#, c-format
+msgid "Double underline %1$s, "
+msgstr "Dvojito podčiarknuť %1$s, "
+
+#: src/Font.cpp:178
+#, c-format
+msgid "Wavy underline %1$s, "
+msgstr "Vlnovkou podčiarknuté %1$s, "
+
+#: src/Font.cpp:181
+#, c-format
+msgid "Noun %1$s, "
+msgstr "Meno %1$s, "
+
+#: src/Font.cpp:195
+#, c-format
+msgid "Language: %1$s, "
+msgstr "Jazyk: %1$s, "
+
+#: src/Font.cpp:198
+#, c-format
+msgid "Number %1$s"
+msgstr "Číslo %1$s"
+
+#: src/Format.cpp:668 src/Format.cpp:681 src/Format.cpp:691
+msgid "Cannot view file"
+msgstr "Nemôžem zobraziť súbor"
+
+#: src/Format.cpp:669 src/Format.cpp:739 src/frontends/qt4/GuiView.cpp:3462
+#, c-format
+msgid "File does not exist: %1$s"
+msgstr "Súbor neexistuje: %1$s"
+
+#: src/Format.cpp:682
+#, c-format
+msgid "No information for viewing %1$s"
+msgstr "Žiadne informácie pre prezeranie %1$s"
+
+#: src/Format.cpp:692
+#, c-format
+msgid "Auto-view file %1$s failed"
+msgstr "Automatický prehľad súboru %1$s sa nepodaril"
+
+#: src/Format.cpp:738 src/Format.cpp:750 src/Format.cpp:763 src/Format.cpp:774
+msgid "Cannot edit file"
+msgstr "Nemôžem editovať súbor"
+
+#: src/Format.cpp:751
+msgid "LinkBack files can only be edited on Apple Mac OSX."
+msgstr "Súbory LinkBack je možné editovať len na Apple Mac OSX."
+
+#: src/Format.cpp:764
+#, c-format
+msgid "No information for editing %1$s"
+msgstr "Žiadne informácie pre editáciu %1$s"
+
+#: src/Format.cpp:775
+#, c-format
+msgid "Auto-edit file %1$s failed"
+msgstr "Automatická editácia súboru %1$s zlyhala"
+
+#: src/KeyMap.cpp:229 src/KeyMap.cpp:244
+msgid "Could not find bind file"
+msgstr "Nemôžem nájsť súbor skratiek"
+
+#: src/KeyMap.cpp:230
+#, c-format
+msgid ""
+"Unable to find the bind file\n"
+"%1$s.\n"
+"Please check your installation."
+msgstr ""
+"Nemôžem nájsť súbor skratiek\n"
+"%1$s.\n"
+"Skontrolujte prosím vašu inštaláciu."
+
+#: src/KeyMap.cpp:237
+msgid "Could not find `cua.bind' file"
+msgstr "Nemôžem nájsť súbor `cua.bind'"
+
+#: src/KeyMap.cpp:238
+msgid ""
+"Unable to find the default bind file `cua.bind'.\n"
+"Please check your installation."
+msgstr ""
+"LyX nenašiel predvolený súbor skratiek `cua.bind'.\n"
+"Skontrolujte prosím vašu inštaláciu."
+
+#: src/KeyMap.cpp:245
+#, c-format
+msgid ""
+"Unable to find the bind file\n"
+"%1$s.\n"
+"Falling back to default."
+msgstr ""
+"Nemôžem nájsť súbor skratiek\n"
+"%1$s.\n"
+"Ustupujem na štandard."
+
+#: src/KeySequence.cpp:181
+msgid " options: "
+msgstr " voľby: "
+
+#: src/LaTeX.cpp:58
+#, c-format
+msgid "Waiting for LaTeX run number %1$d"
+msgstr "Čakanie na %1$d spracovanie LaTeX-u"
+
+#: src/LaTeX.cpp:280 src/LaTeX.cpp:382
+msgid "Running Index Processor."
+msgstr "Spúšťam generáciu registra."
+
+#: src/LaTeX.cpp:311 src/LaTeX.cpp:362
+msgid "Running BibTeX."
+msgstr "Spúšťam BibTeX."
+
+#: src/LaTeX.cpp:481
+msgid "Running MakeIndex for nomencl."
+msgstr "Spúšťam MakeIndex pre nomencl."
+
+#: src/LaTeX.cpp:1348 src/LaTeX.cpp:1354 src/LaTeX.cpp:1363
+msgid "BibTeX error: "
+msgstr "BibTeX chyba: "
+
+#: src/LaTeX.cpp:1370
+msgid "Biber error: "
+msgstr "Biber chyba: "
+
+#: src/LaTeXFonts.cpp:221 src/LaTeXFonts.cpp:290
+msgid "Font not available"
+msgstr "Font nie je dostupný"
+
+#: src/LaTeXFonts.cpp:222 src/LaTeXFonts.cpp:291
+#, c-format
+msgid ""
+"The LaTeX package `%1$s' needed for the font `%2$s'\n"
+"is not available on your system. LyX will fall back to the default font."
+msgstr ""
+"Balík LaTeX-a `%1$s' ktorý font `%2$s potrebuje\n"
+"nie je dostupný na vašom systéme. LyX sa stiahne na štandardný font."
+
+#: src/LyX.cpp:148
+msgid "Could not read configuration file"
+msgstr "Nemôžem čítať konfiguračný súbor"
+
+#: src/LyX.cpp:149
+#, c-format
+msgid ""
+"Error while reading the configuration file\n"
+"%1$s.\n"
+"Please check your installation."
+msgstr ""
+"Chyba pri čítaní konfiguračného súboru\n"
+"%1$s.\n"
+"Skontrolujte prosím vašu inštaláciu."
+
+#: src/LyX.cpp:402
+msgid "The following files could not be loaded:"
+msgstr "Nasledovné súbory sa nedali nahrať:"
+
+#: src/LyX.cpp:443
+#, c-format
+msgid "%1$s does not appear like a LyX created temporary directory."
+msgstr "%1$s nevyzerá ako pomocný adresár vytvorený LyXom."
+
+#: src/LyX.cpp:445
+msgid "Cannot remove temporary directory"
+msgstr "Nedá sa zmazať pomocný adresár"
+
+#: src/LyX.cpp:450
+#, c-format
+msgid "Unable to remove the temporary directory %1$s"
+msgstr "Nedá sa zmazať pomocný adresár %1$s"
+
+#: src/LyX.cpp:479
+#, c-format
+msgid "Wrong command line option `%1$s'. Exiting."
+msgstr "Zlá voľba v príkazovom riadku `%1$s'. Končím."
+
+#: src/LyX.cpp:497
+msgid "Missing filename for this operation."
+msgstr "Chýbajúci názov súboru pre túto operáciu."
+
+#: src/LyX.cpp:546
+#, c-format
+msgid "LyX failed to load the following file: %1$s"
+msgstr "LyX zlyhal načítať nasledujúci súbor: %1$s"
+
+#: src/LyX.cpp:593
+msgid "No textclass is found"
+msgstr "Nenašiel sa žiadny súbor tried (textclass)"
+
+#: src/LyX.cpp:594
+msgid ""
+"LyX will only have minimal functionality because no textclasses have been "
+"found. You can either try to reconfigure LyX normally, try to reconfigure "
+"without checking your LaTeX installation, or continue."
+msgstr ""
+"LyX bude mať len minimálnu funkčnosť lebo sa nenašli žiadne súbory tried. "
+"Môžte skúsiť normálnu rekonfiguráciu, alebo rekonfigurovať bez kontrolovania "
+"vašej LaTeX-inštalácie, alebo pokračovať."
+
+#: src/LyX.cpp:598
+msgid "&Reconfigure"
+msgstr "&Rekonfigurácia"
+
+#: src/LyX.cpp:599
+msgid "&Without LaTeX"
+msgstr "&Bez použitia LaTeX-a"
+
+#: src/LyX.cpp:600 src/VCBackend.cpp:967 src/VCBackend.cpp:971
+msgid "&Continue"
+msgstr "&Pokračovať"
+
+#: src/LyX.cpp:703
+msgid ""
+"SIGHUP signal caught!\n"
+"Bye."
+msgstr ""
+"Zachytený signál SIGHUP!\n"
+"Ahoj."
+
+#: src/LyX.cpp:707
+msgid ""
+"SIGFPE signal caught!\n"
+"Bye."
+msgstr ""
+"Zachytený signál SIGFPE!\n"
+"Ahoj."
+
+#: src/LyX.cpp:710
+msgid ""
+"SIGSEGV signal caught!\n"
+"Sorry, you have found a bug in LyX, hope you have not lost any data.\n"
+"Please read the bug-reporting instructions in 'Help->Introduction' and send "
+"us a bug report, if necessary. Thanks!\n"
+"Bye."
+msgstr ""
+"Zachytený signál SIGSEGV!\n"
+"Ľutujem, našli ste chybu v LyXe, dúfam že ste nestratili žiadne dáta.\n"
+"Prečítajte si prosím údaje pre oznámenie chyby v 'Pomocník -> Úvod' a keď "
+"treba, pošlite nám to oznámenie. Ďakujem!\n"
+"Ahoj."
+
+#: src/LyX.cpp:726
+msgid "LyX crashed!"
+msgstr "LyX havaroval!"
+
+#: src/LyX.cpp:760
+msgid "LyX: "
+msgstr "LyX: "
+
+#: src/LyX.cpp:1009
+msgid "Could not create temporary directory"
+msgstr "Nedá sa vytvoriť pomocný adresár"
+
+#: src/LyX.cpp:1010
+#, c-format
+msgid ""
+"Could not create a temporary directory in\n"
+"\"%1$s\"\n"
+"Make sure that this path exists and is writable and try again."
+msgstr ""
+"Nedá sa vytvoriť pomocný adresár v\n"
+"\"%1$s\"\n"
+"Zaistite, že táto cesta existuje a má práva na zápis. Potom to skúste znovu."
+
+#: src/LyX.cpp:1074
+msgid "Missing user LyX directory"
+msgstr "Chýba užívateľský adresár LyX-u"
+
+#: src/LyX.cpp:1075
+#, c-format
+msgid ""
+"You have specified a non-existent user LyX directory, %1$s.\n"
+"It is needed to keep your own configuration."
+msgstr ""
+"Uviedli ste neexistujúci užívateľský adresár LyX-u, %1$s.\n"
+"Je potrebný k zachovaniu vašej konfigurácii."
+
+#: src/LyX.cpp:1080
+msgid "&Create directory"
+msgstr "V&ytvoriť adresár"
+
+#: src/LyX.cpp:1081
+msgid "&Exit LyX"
+msgstr "&Ukončiť LyX"
+
+#: src/LyX.cpp:1082
+msgid "No user LyX directory. Exiting."
+msgstr "Žiadny užívateľský adresár LyX-u. Koniec."
+
+#: src/LyX.cpp:1086
+#, c-format
+msgid "LyX: Creating directory %1$s"
+msgstr "LyX: Vytváram adresár %1$s"
+
+#: src/LyX.cpp:1091
+msgid "Failed to create directory. Exiting."
+msgstr "Nepodarilo sa vytvoriť adresár. Končím."
+
+#: src/LyX.cpp:1164
+msgid "List of supported debug flags:"
+msgstr "Zoznam podporovaných ladiacich indikátorov:"
+
+#: src/LyX.cpp:1168
+#, c-format
+msgid "Setting debug level to %1$s"
+msgstr "Nastavenie úrovne ladenia na %1$s"
+
+#: src/LyX.cpp:1179
+msgid ""
+"Usage: lyx [ command line switches ] [ name.lyx ... ]\n"
+"Command line switches (case sensitive):\n"
+"\t-help summarize LyX usage\n"
+"\t-userdir dir set user directory to dir\n"
+"\t-sysdir dir set system directory to dir\n"
+"\t-geometry WxH+X+Y set geometry of the main window\n"
+"\t-dbg feature[,feature]...\n"
+" select the features to debug.\n"
+" Type `lyx -dbg' to see the list of features\n"
+"\t-x [--execute] command\n"
+" where command is a lyx command.\n"
+"\t-e [--export] fmt\n"
+" where fmt is the export format of choice. Look in\n"
+" Tools->Preferences->File Handling->File Formats->Short "
+"Name\n"
+" to see which parameter (which differs from the format "
+"name\n"
+" in the File->Export menu) should be passed. To export to\n"
+" the document's default output format, use 'default'.\n"
+" Note that the order of -e and -x switches matters.\n"
+"\t-E [--export-to] fmt filename\n"
+" where fmt is the export format of choice (see --export),\n"
+" and filename is the destination filename.\n"
+"\t-i [--import] fmt file.xxx\n"
+" where fmt is the import format of choice\n"
+" and file.xxx is the file to be imported.\n"
+"\t-f [--force-overwrite] what\n"
+" where what is either `all', `main' or `none',\n"
+" specifying whether all files, main file only, or no "
+"files,\n"
+" respectively, are to be overwritten during a batch "
+"export.\n"
+" Anything else is equivalent to `all', but is not "
+"consumed.\n"
+"\t--ignore-error-message which\n"
+" allows you to ignore specific LaTeX error messages.\n"
+" Do not use for final documents! Currently supported "
+"values:\n"
+" * missing_glyphs: Fontspec `missing glyphs' error.\n"
+"\t-n [--no-remote]\n"
+" open documents in a new instance\n"
+"\t-r [--remote]\n"
+" open documents in an already running instance\n"
+" (a working lyxpipe is needed)\n"
+"\t-v [--verbose]\n"
+" report on terminal about spawned commands.\n"
+"\t-batch execute commands without launching GUI and exit.\n"
+"\t-version summarize version and build info\n"
+"Check the LyX man page for more details."
+msgstr ""
+"Použitie: lyx [prepínače ] [ názov.lyx … ]\n"
+"Prepínače (rozlišuje sa veľkosť písmen):\n"
+"\t-help sumarizuje použitie LyX\n"
+"\t-userdir dir nastaviť používateľský adresár na dir\n"
+"\t-sysdir dir nastaviť systémový adresár na dir\n"
+"\t-geometry WxH+X+Y nastaviť geometriu hlavného okna\n"
+"\t-dbg časť[,časť]…\n"
+" vyberie patričné časti na ladenie.\n"
+" Príkaz `lyx -dbg' vypíše zoznam ladiacich častí\n"
+"\t-x [--execute] príkaz\n"
+" spustí lyx-príkaz príkaz.\n"
+"\t-e [--export] fmt\n"
+" kde fmt je vybraný exportný formát. Pozrite si\n"
+" Nástroje -> Preferencie… -> Obsluha súborov -> Formáty "
+"Súborov -> Skratka\n"
+" aby ste videli, ktoré parametre sú vhodné. Pre export do "
+"formátu\n"
+" ktorý je nastavený v dokumente ako štandard použite "
+"'default'.\n"
+" (Líšia sa od mena formátu v menu Súbor->Exportovať).\n"
+" Všimnite si že poradie prepínačov -e a -x je významné.\n"
+"\t-E [--export-to] fmt názov\n"
+" kde fmt je vybraný exportný formát (pozrite --export),\n"
+" a názov je meno výsledného súboru.\n"
+"\t-i [--import] fmt file.xxx\n"
+" kde fmt je vybraný formát k importu\n"
+" a file.xxx je meno súboru určeného pre import.\n"
+"\t-f [--force-overwrite] čo\n"
+" kde \"čo\" je `all' alebo `main' alebo `none'.\n"
+" Keď `all', tak bude prepísaný každý súbor počas\n"
+" dávkového exportu.\n"
+" Keď `main' bude prepísaný len hlavný súbor.\n"
+" Keď `none' nebude nič prepísané.\n"
+" Všetko iné je rovnocenné k `all', len že nie je "
+"skonzumované.\n"
+"\t--ignore-error-message čo\n"
+" dovolí ignorovať špecifické LaTeX hlásenia.\n"
+" Nepoužívajte pre finálne dokumenty! Aktuálne podporované "
+"hodnoty:\n"
+" * missing_glyphs: Fontspec chyba `missing glyphs'.\n"
+"\t-n [--no-remote]\n"
+" otvorí dokumenty v novej inštancii\n"
+"\t-r [--remote]\n"
+" otvorí dokumenty v už spustenej inštancii\n"
+" (potrebujete pracujúci lyx-dátovod)\n"
+"\t-v [--verbose]\n"
+" hlási vytvorené príkazy na terminál.\n"
+"\t-batch spusti príkazy bez GUI a skonč.\n"
+"\t-version zhrnúť verziu a prekladnú informáciu.\n"
+"Viac informácií nájdete v manuálovej stránke LyXu."
+
+#: src/LyX.cpp:1232 src/frontends/qt4/GuiAbout.cpp:244
+msgid " Git commit hash "
+msgstr " Zapísaná git transformácia "
+
+#: src/LyX.cpp:1243 src/support/Package.cpp:647
+msgid "No system directory"
+msgstr "Nemám systémový adresár"
+
+#: src/LyX.cpp:1244
+msgid "Missing directory for -sysdir switch"
+msgstr "Chýba adresár pre prepínač -sysdir"
+
+#: src/LyX.cpp:1255
+msgid "No user directory"
+msgstr "Nemám užívateľský adresár"
+
+#: src/LyX.cpp:1256
+msgid "Missing directory for -userdir switch"
+msgstr "Chýba adresár pre prepínač -userdir"
+
+#: src/LyX.cpp:1267
+msgid "Incomplete command"
+msgstr "Neúplný príkaz"
+
+#: src/LyX.cpp:1268
+msgid "Missing command string after --execute switch"
+msgstr "Chýba príkazový reťazec po prepínači --execute"
+
+#: src/LyX.cpp:1279
+msgid "Missing file type [eg latex, ps...] after --export-to switch"
+msgstr "Chýba typ súboru [napr. latex, ps…] po prepínači --export-to"
+
+#: src/LyX.cpp:1284
+msgid "Missing destination filename after --export-to switch"
+msgstr "Chýba názov výstupného súboru po prepínači --export-to"
+
+#: src/LyX.cpp:1297
+msgid "Missing file type [eg latex, ps...] after --export switch"
+msgstr "Chýba typ súboru [napr. latex, ps…] po prepínači --export"
+
+#: src/LyX.cpp:1310
+msgid "Missing file type [eg latex, ps...] after --import switch"
+msgstr "Chýba typ súboru [napr. latex, ps…] po prepínači --import"
+
+#: src/LyX.cpp:1315
+msgid "Missing filename for --import"
+msgstr "Chýba názov súboru pre --import"
+
+#: src/LyXRC.cpp:3071
+msgid ""
+"Consider run-together words, such as \"diskdrive\" for \"disk drive\", as "
+"legal words?"
+msgstr ""
+"Považovať spojené slová ako sú \"kedytedy\" namiesto \"kedy tedy\" ako "
+"správne slová?"
+
+#: src/LyXRC.cpp:3075
+msgid ""
+"Specify an alternate language. The default is to use the language of the "
+"document."
+msgstr ""
+"Nastavenie alternatívneho jazyka. Implicitne sa použije jazyk dokumentu."
+
+#: src/LyXRC.cpp:3083
+msgid ""
+"De-select if you don't want the current selection to be replaced "
+"automatically by what you type."
+msgstr ""
+"Zrušte voľbu ak nechcete, aby aktuálny výber bol automaticky nahradený s "
+"tým, čo píšete."
+
+#: src/LyXRC.cpp:3087
+msgid ""
+"De-select if you don't want the class options to be reset to defaults after "
+"class change."
+msgstr ""
+"Zrušte výber ak nechcete, aby voľby triedy boli nahradené štandardom po "
+"zmene triedy."
+
+#: src/LyXRC.cpp:3091
+msgid ""
+"The time interval between auto-saves (in seconds). 0 means no auto-save."
+msgstr ""
+"Časový interval pri automatickom ukladaní (v sekundách). 0 znamená bez "
+"automatického ukladania."
+
+#: src/LyXRC.cpp:3098
+msgid ""
+"The path for storing backup files. If it is an empty string, LyX will store "
+"the backup file in the same directory as the original file."
+msgstr ""
+"Cesta pre ukladanie záložných súborov. Ak je to prázdny reťazec, LyX bude "
+"ukladať záložné súbory do adresáru originálneho súbora."
+
+#: src/LyXRC.cpp:3102
+msgid ""
+"Define the options of bibtex (cf. man bibtex) or select an alternative "
+"compiler (e.g. mlbibtex or bibulus)."
+msgstr ""
+"Zvoľte voľby pre bibtex (porovnaj man bibtex) alebo zvoľte alternatívny "
+"kompilátor (napr. mlbibtex alebo bibulus)."
+
+#: src/LyXRC.cpp:3106
+msgid "Define the options of the bibtex program for PLaTeX (Japanese LaTeX)."
+msgstr "Definuje voľby programu bibtex pre PLaTeX (Japonský LaTeX)."
+
+#: src/LyXRC.cpp:3110
+msgid ""
+"Keybindings file. Can either specify an absolute path, or LyX will look in "
+"its global and local bind/ directories."
+msgstr ""
+"Súbor s klávesovými skratkami. Môžete použiť absolútnu cestu, ináč bude LyX "
+"hľadať v globálnych a lokálnych bind/ adresároch."
+
+#: src/LyXRC.cpp:3114
+msgid "Select to check whether the lastfiles still exist."
+msgstr "Vyberte to na kontrolu existencie posledných súborov."
+
+#: src/LyXRC.cpp:3118
+msgid ""
+"Define how to run chktex. E.g. \"chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -n30 -"
+"n38\" Refer to the ChkTeX documentation."
+msgstr ""
+"Definujte ako spustiť chktex. Napr. \"chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -"
+"n30 -n38\" Pozrite si dokumentáciu k ChkTeX."
+
+#: src/LyXRC.cpp:3125
+msgid ""
+"Forbid use of external converters with 'needauth' option to prevent "
+"undesired effects."
+msgstr ""
+"Blokovať externé konvertori s 'needauth' voľbou na zabránenie nežiadúcich "
+"efektov. "
+
+#: src/LyXRC.cpp:3129
+msgid ""
+"Ask user before calling external converters with 'needauth' option to "
+"prevent undesired effects."
+msgstr ""
+"Žiadať o povolenie pred spustením externého konvertora s 'needauth' voľbou "
+"na zabránenie nežiadúcich efektov."
+
+#: src/LyXRC.cpp:3136
+msgid ""
+"LyX normally doesn't update the cursor position if you move the scrollbar. "
+"Set to true if you'd prefer to always have the cursor on screen."
+msgstr ""
+"LyX normálne neaktualizuje pozíciu kurzora, ak ste pohli posuvníkom. "
+"Nastavte túto voľbu, ak preferujete mať pozíciu kurzora na obrazovke."
+
+#: src/LyXRC.cpp:3144
+msgid ""
+"LyX normally doesn't allow the user to scroll further than the bottom of the "
+"document. Set to true if you prefer to scroll the bottom of the document to "
+"the top of the screen"
+msgstr ""
+"LyX normálne nepovoľuje skrolovať pod koniec dokumentu. Nastavte túto voľbu, "
+"ak preferujete skrolovať koniec až na vrchol obrazovky"
+
+#: src/LyXRC.cpp:3148
+msgid "Make Apple key act as Meta and Control key as Ctrl."
+msgstr "Prehoď Apple klávesu na Meta a Kontrol klávesu na Ctrl."
+
+#: src/LyXRC.cpp:3152
+msgid "Use the Mac OS X conventions for cursor movement"
+msgstr "Použiť dohody Mac OS X pre pohyb kurzoru"