+#~ msgid ""
+#~ "A bitmap file.\n"
+#~ "Use this template to include bitmap images of any kind except\n"
+#~ "photos in JPEG format: These will be uncompressed by this\n"
+#~ "template, therefore it is better to include them with a\n"
+#~ "graphics inset, since the graphics inset preserves the\n"
+#~ "compression if the pdflatex compiler is used.\n"
+#~ msgstr ""
+#~ "Bitmapový súbor. Okrem druhu JPEG, používajte túto šablónu na vklad\n"
+#~ "akýchkoľvek bitmapových obrázkov: S touto šablónou budú dekomprimované.\n"
+#~ "Je lepšie použiť ich v grafickej vložke lebo grafická vložka uchováva\n"
+#~ "kompresiu pri použití programu pdflatex.\n"
+
+#~ msgid "A bitmap file.\n"
+#~ msgstr "Bitmapový súbor.\n"
+
+#~ msgid "Don't uncompress image before exporting to LaTeX"
+#~ msgstr "Nedekomprimovať obrázok pred exportom do LaTeX-u"
+
+#~ msgid "Don't un&zip on export"
+#~ msgstr "Nerozbaliť pri exporte (&unzip)"
+
+#~ msgid "Insettext/tabular messages"
+#~ msgstr "Hlásenia z tabuliek/vložiek textu"
+
+#~ msgid "Risk and Safety Statements|R"
+#~ msgstr "Rizikové a Poistné Príkazy|R"
+
+#~ msgid ""
+#~ "Could not print the document %1$s.\n"
+#~ "Check that your printer is set up correctly."
+#~ msgstr ""
+#~ "Nedal sa vytlačiť dokument %1$s.\n"
+#~ "Skontrolujte nastavenie vašej tlačiarne."
+
+#~ msgid "Print document failed"
+#~ msgstr "Tlač dokumentu zlyhala"
+
+#~ msgid "Printer Command Options"
+#~ msgstr "Voľby Príkaz Pre Tlačiareň"
+
+#~ msgid "Extension to be used when printing to file."
+#~ msgstr "Prípona na použitie pri tlačí do súboru."
+
+#~ msgid "File ex&tension:"
+#~ msgstr "Prípon&a súboru:"
+
+#~ msgid "Option used to print to a file."
+#~ msgstr "Možnosti používané pri tlači do súboru."
+
+#~ msgid "Print to &file:"
+#~ msgstr "Tlač do &súboru:"
+
+#~ msgid "Option used to print to non-default printer."
+#~ msgstr "Voľba na tlač pre neštandardnú tlačiareň."
+
+#~ msgid "Set &printer:"
+#~ msgstr "Nastaviť &tlačiareň:"
+
+#~ msgid "Option used with spool command to set printer."
+#~ msgstr "Voľba použitá spool-om k nastaveniu tlačiarne."
+
+#~ msgid "Spool &printer:"
+#~ msgstr "Spool pre t&lačiareň:"
+
+#~ msgid ""
+#~ "Command transmitted to the system to actually print the postscript file."
+#~ msgstr "Príkaz odovzdaný do systému, aby tlačil do postscript-súboru."
+
+#~ msgid "Spool co&mmand:"
+#~ msgstr "Príka&z do spoolu:"
+
+#~ msgid "Option used to reverse page order."
+#~ msgstr "Voľba na použitie pre tlač v opačnom poradí."
+
+#~ msgid "Re&verse pages:"
+#~ msgstr "&Opačné poradie stránok:"
+
+#~ msgid "&Number of copies:"
+#~ msgstr "Poč&et kópií:"
+
+#~ msgid "Option used to set number of copies."
+#~ msgstr "Voľba určujúca počet kópií."
+
+#~ msgid "Option used to print a range of pages."
+#~ msgstr "Voľba určujúca tlač rozsahu strán."
+
+#~ msgid "Co&llated:"
+#~ msgstr "Uspor&iadať:"
+
+#~ msgid "Pa&ge range:"
+#~ msgstr "&Rozsah strán:"
+
+#~ msgid "Option used to collate multiple copies."
+#~ msgstr "Voľba určujúca usporiadanie kópií za sebou."
+
+#~ msgid "&Odd pages:"
+#~ msgstr "&Nepárne strany:"
+
+#~ msgid "&Even pages:"
+#~ msgstr "&Párne strany:"
+
+#~ msgid "Any other options you'd like to use with the printer command."
+#~ msgstr "Ľubovoľné ďalšie voľby pre príkaz k tlači."
+
+#~ msgid "E&xtra options:"
+#~ msgstr "E&xtra voľby:"
+
+#~ msgid "Customizes output to a given printer. Expert option."
+#~ msgstr "Prispôsobiť výstup na určenú tlačiareň. Pokročilé nastavenie."
+
+#~ msgid ""
+#~ "Normally, this needs to be checked only if you are using dvips as your "
+#~ "printer command and you have config.<printer> files installed for all "
+#~ "your printers."
+#~ msgstr ""
+#~ "Vyberte to len keď používate dvips ako príkaz k tlači a máte súbory typu "
+#~ "config.<tlačiareň> nainštalované pre všetky vaše tlačiarne."
+
+#~ msgid "Adapt &output to printer"
+#~ msgstr "Prispôso&biť výstup na tlačiareň"
+
+#~ msgid "Name of the default printer"
+#~ msgstr "Názov štandardnej tlačiarne"
+
+#~ msgid "Default &printer:"
+#~ msgstr "Štandardná &tlačiareň:"
+
+#~ msgid "Printer co&mmand:"
+#~ msgstr "Prí&kaz pre tlačiareň:"
+
+#~ msgid "Pages"
+#~ msgstr "Strany"
+
+#~ msgid "Page number to print from"
+#~ msgstr "Číslo prvej strany na tlačenie"
+
+#~ msgid "&To:[[as in 'From page x to page y']]"
+#~ msgstr "&Do strany:"
+
+#~ msgid "Page number to print to"
+#~ msgstr "Číslo poslednej strany na tlačenie"
+
+#~ msgid "Print all pages"
+#~ msgstr "Tlačiť všetky strany"
+
+#~ msgid "Fro&m"
+#~ msgstr "&Od"
+
+#~ msgid "Print &odd-numbered pages"
+#~ msgstr "Tlačiť &nepárno očíslované strany"
+
+#~ msgid "Print &even-numbered pages"
+#~ msgstr "Tlačiť &párno číslované strany"
+
+#~ msgid "Print in reverse order"
+#~ msgstr "Tlačiť v opačnom poradí"
+
+#~ msgid "Re&verse order"
+#~ msgstr "Opačné por&adie"
+
+#~ msgid "Copie&s"
+#~ msgstr "Kóp&ie"
+
+#~ msgid "Number of copies"
+#~ msgstr "Počet kópií"
+
+#~ msgid "Collate copies"
+#~ msgstr "Usporiadať kópie"
+
+#~ msgid "&Collate"
+#~ msgstr "&Usporiadať"
+
+#~ msgid "&Print"
+#~ msgstr "&Tlač"
+
+#~ msgid "Print Destination"
+#~ msgstr "Cieľ tlače"
+
+#~ msgid "Send output to the printer"
+#~ msgstr "Poslať výstup na tlačiareň"
+
+#~ msgid "P&rinter:"
+#~ msgstr "T&lačiareň:"
+
+#~ msgid "Send output to the given printer"
+#~ msgstr "Poslať výstup na určenú tlačiareň"
+
+#~ msgid "Send output to a file"
+#~ msgstr "Poslať výstup do súboru"
+
+#~ msgid "Print...|P"
+#~ msgstr "Tlač...|T"
+
+#~ msgid "Print document"
+#~ msgstr "Tlač dokument"
+
+#~ msgid "Unable to parse \"%1$s\""
+#~ msgstr "Nemôžem analyzovať \"%1$s\""
+
+#~ msgid "Unrecognized target \"%1$s\""
+#~ msgstr "Neznámy cieľ \"%1$s\""
+
+#~ msgid "Error exporting to DVI."
+#~ msgstr "Chyba pri exporte na DVI."
+
+#~ msgid "Error running external commands."
+#~ msgstr "Chyba pri spúšťaní externých príkazov."
+
+#~ msgid "The option for specifying whether the copies should be collated."
+#~ msgstr "Voľba špecifikuje, či sa kópie majú usporiadať."
+
+#~ msgid "The option for specifying the number of copies to print."
+#~ msgstr "Voľba špecifikuje počet kópií pre tlač."
+
+#~ msgid ""
+#~ "The default printer to print on. If none is specified, LyX will use the "
+#~ "environment variable PRINTER."
+#~ msgstr ""
+#~ "Štandardná tlačiareň pre tlač. Ak nič nie je nastavené, tak LyX použije "
+#~ "premennú prostredia PRINTER."
+
+#~ msgid "The option to print only even pages."
+#~ msgstr "Voľba na tlač iba párnych strán."
+
+#~ msgid ""
+#~ "Extra options to pass to printing program after everything else, but "
+#~ "before the filename of the DVI file to be printed."
+#~ msgstr ""
+#~ "Extra voľby pre program tlače, ktoré sa použijú tesne pred tlačou DVI "
+#~ "súboru."
+
+#~ msgid "Extension of printer program output file. Usually \".ps\"."
+#~ msgstr "Prípona výstupného súboru tlače. Obyčajne \".ps\"."
+
+#~ msgid "The option to print only odd pages."
+#~ msgstr "Voľba na tlač iba nepárnych strán."
+
+#~ msgid "The option for specifying a comma-separated list of pages to print."
+#~ msgstr "Voľba špecifikuje čiarkami oddelený zoznam strán pre tlač."
+
+#~ msgid "The option to reverse the order of the pages printed."
+#~ msgstr "Voľba pre tlač strán v opačnom poradí."
+
+#~ msgid ""
+#~ "When set, this printer option automatically prints to a file and then "
+#~ "calls a separate print spooling program on that file with the given name "
+#~ "and arguments."
+#~ msgstr ""
+#~ "Keď nastavené, táto voľba automaticky tlačí do súboru a potom pre tlač "
+#~ "tohto súboru volá \"spool\" program s daným menom a s danými parametrami."
+
+#~ msgid ""
+#~ "If you specify a printer name in the print dialog, the following argument "
+#~ "is prepended along with the printer name after the spool command."
+#~ msgstr ""
+#~ "Ak špecifikujete názov tlačiarne v dialógu pre tlač, tak nasledujúci "
+#~ "argument sa spolu s názvom tlačiarne pridá k spool-príkazu."
+
+#~ msgid "Option to pass to the print program to print to a file."
+#~ msgstr "Voľba, aby program na tlač tlačil do súboru."
+
+#~ msgid "Option to pass to the print program to print on a specific printer."
+#~ msgstr "Voľba, aby program na tlač tlačil na konkrétnej tlačiarni."
+
+#~ msgid ""
+#~ "Select for LyX to pass the name of the destination printer to your print "
+#~ "command."
+#~ msgstr ""
+#~ "Vyberte, keď chcete aby LyX preniesol názov tlačiarne ku programu pre "
+#~ "tlač."
+
+#~ msgid "Your favorite print program, e.g. \"dvips\", \"dvilj4\"."
+#~ msgstr "Váš obľúbený program na tlač, napr. \"dvips\", \"dvilj4\"."
+
+#~ msgid "Printer"
+#~ msgstr "Tlačiareň"
+
+#~ msgid "Print Document"
+#~ msgstr "Tlač Dokument"
+
+#~ msgid "Print to file"
+#~ msgstr "Tlačiť do súboru"
+
+#~ msgid "PostScript files (*.ps)"
+#~ msgstr "PostScript súbory (*.ps)"
+
+#~ msgid "Standard Code"
+#~ msgstr "Štandardný Kód"
+
+#~ msgid "Black"
+#~ msgstr "Čierna"
+
+#~ msgid "Blue"
+#~ msgstr "Modrá"
+
+#~ msgid "Brown"
+#~ msgstr "Hnedá"
+
+#~ msgid "Cyan"
+#~ msgstr "Zelenomodrá"
+
+#~ msgid "Darkgray"
+#~ msgstr "Tmavošedá"
+
+#~ msgid "Gray"
+#~ msgstr "Šedá"
+
+#~ msgid "Green"
+#~ msgstr "Zelená"
+
+#~ msgid "Lightgray"
+#~ msgstr "Svetlošedá"
+
+#~ msgid "Lime"
+#~ msgstr "Svetlozelená"
+
+#~ msgid "Magenta"
+#~ msgstr "Purpurová"
+
+#~ msgid "Olive"
+#~ msgstr "Olivová"
+
+#~ msgid "Orange"
+#~ msgstr "Oranžová"
+
+#~ msgid "Pink"
+#~ msgstr "Ružová"
+
+#~ msgid "Purple"
+#~ msgstr "Nachová"
+
+#~ msgid "Red"
+#~ msgstr "Červená"
+
+#~ msgid "Teal"
+#~ msgstr "Smaragdovozelená"
+
+#~ msgid "Violet"
+#~ msgstr "Fialová"
+
+#~ msgid "White"
+#~ msgstr "Biela"
+
+#~ msgid "Yellow"
+#~ msgstr "Žltá"
+
+#~ msgid "Unknown document class"
+#~ msgstr "Neznáma trieda dokumentu"
+
+#~ msgid "Using the default document class, because the class %1$s is unknown."
+#~ msgstr "Použitá štandardná trieda dokumentu, lebo trieda %1$s je neznáma."
+
+#~ msgid "Inner box -- needed for fixed width & line breaks"
+#~ msgstr "Vnútorný rámik -- potrebný pre pevnú šírku a lom riadkov"
+
+#~ msgid "Included File Invalid"
+#~ msgstr "Zahrnutý Súbor je Neplatný"
+
+#~ msgid ""
+#~ "Saving this document to a new location has made the file:\n"
+#~ " %1$s\n"
+#~ "inaccessible. You will need to update the included filename."
+#~ msgstr ""
+#~ "Uložením tohto dokumentu na nové miesto sa súbor:\n"
+#~ " %1$s\n"
+#~ "stal nedostupným. Bude potrebné aktualizovať meno zahrnutého súboru."
+
projects / lyx.git / blobdiff