+#: src/Buffer.cpp:4723
+msgid "Emergency file deleted"
+msgstr "Nødkopien sletta"
+
+#: src/Buffer.cpp:4724
+msgid "Do not forget to save your file now!"
+msgstr "Ikkje gløym å lagra dokumentet ditt no!"
+
+#: src/Buffer.cpp:4731
+msgid "Remove emergency file now?"
+msgstr "Fjern nødkopien av dokumentet no?"
+
+#: src/Buffer.cpp:4754
+#, fuzzy
+msgid "Can't rename emergency file!"
+msgstr "Slett nødkopien av dokumentet?"
+
+#: src/Buffer.cpp:4755
+msgid ""
+"LyX was unable to rename the emergency file. You should do so manually. "
+"Otherwise, you will be asked about it again the next time you try to load "
+"this file, and may over-write your own work."
+msgstr ""
+
+#: src/Buffer.cpp:4760
+#, fuzzy
+msgid "Emergency File Renames"
+msgstr "Nødkopien sletta"
+
+#: src/Buffer.cpp:4761
+#, fuzzy, c-format
+msgid ""
+"Emergency file renamed as:\n"
+" %1$s"
+msgstr "Nødkopien sletta"
+
+#: src/Buffer.cpp:4784
+#, c-format
+msgid ""
+"The backup of the document %1$s is newer.\n"
+"\n"
+"Load the backup instead?"
+msgstr ""
+"Reservekopien av dokumentet %1$s er nyare.\n"
+"\n"
+"Skal vi opna det istaden?"
+
+#: src/Buffer.cpp:4786
+msgid "Load backup?"
+msgstr "Gå tilbake til reservekopi?"
+
+#: src/Buffer.cpp:4787
+msgid "&Load backup"
+msgstr "Gå tilbake til &reservekopi"
+
+#: src/Buffer.cpp:4787
+msgid "Load &original"
+msgstr "Last &original"
+
+#: src/Buffer.cpp:4797
+#, c-format
+msgid ""
+"A backup file is successfully loaded, but the original file %1$s is marked "
+"read-only. Please make sure to save the document as a different file."
+msgstr ""
+"Reservekopien er lasta, men originalen %1$s kan berre bli lest frå. Lagra "
+"derfor dokumentet under eit anna namn."
+
+#: src/Buffer.cpp:5190 src/insets/InsetCaption.cpp:401
+msgid "Senseless!!! "
+msgstr "Meiningslaust! "
+
+#: src/Buffer.cpp:5427
+#, c-format
+msgid "Document %1$s reloaded."
+msgstr "Dokumentet %1$s er lasta på nytt."
+
+#: src/Buffer.cpp:5430
+#, c-format
+msgid "Could not reload document %1$s."
+msgstr "Kunne ikkje lasta dokumentet %1$s på nytt."
+
+#: src/BufferParams.cpp:524
+msgid ""
+"The LaTeX package amsmath is only used if AMS formula types or symbols from "
+"the AMS math toolbars are inserted into formulas"
+msgstr ""
+"LaTeXpakken amsmath blir berre brukt om AMS-formlar typar eller symbol frå "
+"AMS-matte- verktylinja blir brukt i formlar"
+
+#: src/BufferParams.cpp:526
+msgid ""
+"The LaTeX package amssymb is only used if symbols from the AMS math toolbars "
+"are inserted into formulas"
+msgstr ""
+"LaTeX pakken amssymb blir berre brukt om mattesymbol frå AMS verktylinja "
+"blir brukt i formlar"
+
+#: src/BufferParams.cpp:528
+msgid ""
+"The LaTeX package cancel is only used if \\cancel commands are used in "
+"formulas"
+msgstr "LaTeX pakken cancel blir berre brukt om \\cancel blir brukt i formlar"
+
+#: src/BufferParams.cpp:530
+msgid ""
+"The LaTeX package esint is only used if special integral symbols are "
+"inserted into formulas"
+msgstr ""
+"esint LaTeX pakke blir berre brukt om spesielle integralsymbol blir brukt"
+
+#: src/BufferParams.cpp:532
+msgid ""
+"The LaTeX package mathdots is only used if the command \\iddots is inserted "
+"into formulas"
+msgstr ""
+"mathdots LaTeX pakken blir berre brukt om \\iddots blir brukt i formlar"
+
+#: src/BufferParams.cpp:534
+msgid ""
+"The LaTeX package mathtools is only used if some mathematical relations are "
+"inserted into formulas"
+msgstr ""
+"LaTeX pakken mathtools blir berre brukt om du bruker matematiske tilhøve i "
+"formlar"
+
+#: src/BufferParams.cpp:536
+msgid ""
+"The LaTeX package mhchem is only used if either the command \\ce or \\cf is "
+"inserted into formulas"
+msgstr ""
+"mhchem LaTeX pakken blir berre brukt om \\ce eller \\cf blir brukt i formlar"
+
+#: src/BufferParams.cpp:538
+msgid ""
+"The LaTeX package stackrel is only used if the command \\stackrel with "
+"subscript is inserted into formulas"
+msgstr ""
+"LaTeX pakken stackrel blir berre brukt om \\stackrel med underskrift blir "
+"brukt i formlar"
+
+#: src/BufferParams.cpp:540
+msgid ""
+"The LaTeX package stmaryrd is only used if symbols from the St Mary's Road "
+"symbol font for theoretical computer science are inserted into formulas"
+msgstr ""
+"LaTeX pakken stmaryrd blir berre brukt om symbol frå St. Mary Road symbolske "
+"skrifttype frå teoretisk datavitskap blir brukt i formlar"
+
+#: src/BufferParams.cpp:542
+msgid ""
+"The LaTeX package undertilde is only used if you use the math frame "
+"decoration 'utilde'"
+msgstr ""
+"LaTeX pakken undertilde blir berre brukt om du bruker matteramma "
+"dekorasjonen 'utilde'"
+
+#: src/BufferParams.cpp:747
+#, c-format
+msgid ""
+"The selected document class\n"
+"\t%1$s\n"
+"requires external files that are not available.\n"
+"The document class can still be used, but the\n"
+"document cannot be compiled until the following\n"
+"prerequisites are installed:\n"
+"\t%2$s\n"
+"See section 3.1.2.2 (Class Availability) of the\n"
+"User's Guide for more information."
+msgstr ""
+"Dokumentklassa etterspurt\n"
+"\t%1$s\n"
+"krev eksternefiler som ikkje er tilgjengelege.\n"
+"Du kan bruke dokumentklassa, men LyX\n"
+"kan ikkje lage ferdige dokument før\n"
+"desse er installert:\n"
+"\t%2$s\n"
+"Sjå bolk 3.1.2.2 av brukar guiden\n"
+"for meir informasjon."
+
+#: src/BufferParams.cpp:756
+msgid "Document class not available"
+msgstr "Dokumentklassa er ikkje tilgjengeleg"
+
+#: src/BufferParams.cpp:1751 src/BufferParams.cpp:2194 src/Encoding.cpp:253
+#: src/Paragraph.cpp:2870 src/frontends/qt/LaTeXHighlighter.cpp:122
+#: src/insets/InsetCommandParams.cpp:510 src/insets/InsetCommandParams.cpp:518
+#: src/insets/InsetGraphics.cpp:885 src/insets/InsetGraphics.cpp:893
+#: src/insets/InsetListings.cpp:301 src/insets/InsetListings.cpp:309
+#: src/insets/InsetListings.cpp:332 src/mathed/MathExtern.cpp:1440
+#: src/mathed/MathExtern.cpp:1514
+msgid "LyX Warning: "
+msgstr "LyX åtvaring: "
+
+#: src/BufferParams.cpp:1752 src/BufferParams.cpp:2195 src/Encoding.cpp:254
+#: src/Paragraph.cpp:2871 src/insets/InsetCommandParams.cpp:511
+#: src/insets/InsetCommandParams.cpp:519 src/insets/InsetGraphics.cpp:886
+#: src/insets/InsetGraphics.cpp:894 src/insets/InsetListings.cpp:302
+#: src/insets/InsetListings.cpp:310 src/mathed/MathExtern.cpp:1441
+#: src/mathed/MathExtern.cpp:1515
+msgid "uncodable character"
+msgstr "Umogeleg teikn"
+
+#: src/BufferParams.cpp:1765
+#, fuzzy
+msgid "Uncodable character in class options"
+msgstr "Det er teikn som ikkje kan kodast i listeinnskotet"
+
+#: src/BufferParams.cpp:1767
+#, fuzzy, c-format
+msgid ""
+"The class options of your document contain glyphs that are unknown in the "
+"current document encoding (namely %1$s).\n"
+"These glyphs are omitted from the output, which may result in incomplete "
+"output.\n"
+"\n"
+"Please select an appropriate document encoding\n"
+"(such as utf8) or change the class options accordingly."
+msgstr ""
+"Namnet til forfattaren '%1$s',\n"
+"er brukt i sporing av endringar, inneheld teikn som ikkje kan\n"
+"bli representert i den kodinga du nyttar: %2$s.\n"
+"Teikna vil ikkje bli lagra i LaTeX-fila.\n"
+"\n"
+"Vel heller ein koding av teikn (slik som utf8)\n"
+"eller endra namnet på forfattaren."
+
+#: src/BufferParams.cpp:2208
+#, fuzzy
+msgid "Uncodable character in user preamble"
+msgstr "Umogeleg teikn i namnet på forfattaren."
+
+#: src/BufferParams.cpp:2210
+#, fuzzy, c-format
+msgid ""
+"The user preamble of your document contains glyphs that are unknown in the "
+"current document encoding (namely %1$s).\n"
+"These glyphs are omitted from the output, which may result in incomplete "
+"output.\n"
+"\n"
+"Please select an appropriate document encoding\n"
+"(such as utf8) or change the preamble code accordingly."
+msgstr ""
+"Namnet til forfattaren '%1$s',\n"
+"er brukt i sporing av endringar, inneheld teikn som ikkje kan\n"
+"bli representert i den kodinga du nyttar: %2$s.\n"
+"Teikna vil ikkje bli lagra i LaTeX-fila.\n"
+"\n"
+"Vel heller ein koding av teikn (slik som utf8)\n"
+"eller endra namnet på forfattaren."
+
+#: src/BufferParams.cpp:2523
+#, c-format
+msgid ""
+"The layout file:\n"
+"%1$s\n"
+"could not be found. A default textclass with default\n"
+"layouts will be used. LyX will not be able to produce\n"
+"correct output."
+msgstr ""
+"Stilfila: \n"
+"%1$s\n"
+"vart ikkje funnen. Ei standard tekstklasse med standard\n"
+"stilfil vil bli brukt. LyX kan ikkje gi deg eit korrekt\n"
+"ferdig dokument."
+
+#: src/BufferParams.cpp:2529
+msgid "Document class not found"
+msgstr "Dokumentklassa er ikkje tilgjengeleg"
+
+#: src/BufferParams.cpp:2536
+#, c-format
+msgid ""
+"Due to some error in it, the layout file:\n"
+"%1$s\n"
+"could not be loaded. A default textclass with default\n"
+"layouts will be used. LyX will not be able to produce\n"
+"correct output."
+msgstr ""
+"På grunn av ei feil i stilfila: \n"
+"%1$s\n"
+"vart ikkje funnen. Ei standard tekstklasse med standard\n"
+"stilfil vil bli brukt. LyX kan ikkje gi deg eit korrekt\n"
+"ferdig dokument."
+
+#: src/BufferParams.cpp:2542 src/BufferView.cpp:1368 src/BufferView.cpp:1400
+msgid "Could not load class"
+msgstr "Kan ikkje laste klassa"
+
+#: src/BufferParams.cpp:2587
+msgid "Error reading internal layout information"
+msgstr "Feil med å lese intern stilinformasjon"
+
+#: src/BufferParams.cpp:2588 src/TextClass.cpp:1901 src/TextClass.cpp:1933
+msgid "Read Error"
+msgstr "Lese feil"
+
+#: src/BufferView.cpp:188
+msgid "No more insets"
+msgstr "Det er ikkje fleire innskot"
+
+#: src/BufferView.cpp:823
+msgid "Save bookmark"
+msgstr "Lagra bokmerke"
+
+#: src/BufferView.cpp:1042
+msgid "Converting document to new document class..."
+msgstr "Konverterer dokumentet til ny dokument klasse ..."
+
+#: src/BufferView.cpp:1087
+msgid "Document is read-only"
+msgstr "Dokumentet kan berre bli lest frå"
+
+#: src/BufferView.cpp:1089
+msgid "Document has been modified externally"
+msgstr ""
+
+#: src/BufferView.cpp:1098
+msgid "This portion of the document is deleted."
+msgstr "Denne delen av dokumentet er sletta."
+
+#: src/BufferView.cpp:1141 src/BufferView.cpp:2185
+#: src/frontends/qt/GuiView.cpp:4077 src/frontends/qt/GuiView.cpp:4164
+msgid "Absolute filename expected."
+msgstr "Eg forventa eit absolutt filnamn."
+
+#: src/BufferView.cpp:1366 src/BufferView.cpp:1398
+#, c-format
+msgid "The document class `%1$s' could not be loaded."
+msgstr "Dokumentklassa '%1$s' kunne ikkje bli lasta."
+
+#: src/BufferView.cpp:1424
+msgid "No further undo information"
+msgstr "Ikkje meir \"Angre\" informasjon"
+
+#: src/BufferView.cpp:1444
+msgid "No further redo information"
+msgstr "Ikkje meir \"Gjer om\" informasjon"
+
+#: src/BufferView.cpp:1692
+msgid "Mark off"
+msgstr "Merke slått av"
+
+#: src/BufferView.cpp:1698
+msgid "Mark on"
+msgstr "Merke på"
+
+#: src/BufferView.cpp:1705
+msgid "Mark removed"
+msgstr "Fjerna merke"
+
+#: src/BufferView.cpp:1708
+msgid "Mark set"
+msgstr "Merke sett"
+
+#: src/BufferView.cpp:1799
+msgid "Statistics for the selection:"
+msgstr "Statistikk for utvalet:"
+
+#: src/BufferView.cpp:1801
+msgid "Statistics for the document:"
+msgstr "Statistikk for dokumentet:"
+
+#: src/BufferView.cpp:1804
+#, c-format
+msgid "%1$d words"
+msgstr "%1$d ord"
+
+#: src/BufferView.cpp:1806
+msgid "One word"
+msgstr "Eitt ord"
+
+#: src/BufferView.cpp:1809
+#, c-format
+msgid "%1$d characters (including blanks)"
+msgstr "%1$d teikn (med mellomrom)"
+
+#: src/BufferView.cpp:1812
+msgid "One character (including blanks)"
+msgstr "Eitt teikn (med mellomrom)"
+
+#: src/BufferView.cpp:1815
+#, c-format
+msgid "%1$d characters (excluding blanks)"
+msgstr "%1$d teikn (utan mellomrom)"
+
+#: src/BufferView.cpp:1818
+msgid "One character (excluding blanks)"
+msgstr "Eitt teikn (utan mellomrom)"
+
+#: src/BufferView.cpp:1820
+msgid "Statistics"
+msgstr "Statistikk"
+
+#: src/BufferView.cpp:2043
+#, c-format
+msgid ""
+"`inset-forall' interrupted because number of actions is larger than %1$d"
+msgstr "'Alle-innskot' stoppa fordi talet på handlingar var større enn %1$d"
+
+#: src/BufferView.cpp:2045
+#, c-format
+msgid "Applied \"%1$s\" to %2$d insets"
+msgstr "Gjorde \"%1$s\" med %2$d innskot"
+
+#: src/BufferView.cpp:2053
+msgid "Branch name"
+msgstr "Greinnamn"
+
+#: src/BufferView.cpp:2060 src/frontends/qt/GuiBranches.cpp:218
+msgid "Branch already exists"
+msgstr "Grein finst frå før"
+
+#: src/BufferView.cpp:2937
+#, c-format
+msgid "Inserting document %1$s..."
+msgstr "Set inn dokumentet %1$s..."
+
+#: src/BufferView.cpp:2952
+#, c-format
+msgid "Document %1$s inserted."
+msgstr "Dokumentet %1$s er sett inn."
+
+#: src/BufferView.cpp:2954
+#, c-format
+msgid "Could not insert document %1$s"
+msgstr "Kunne ikkje sette inn dokumentet %1$s"
+
+#: src/BufferView.cpp:3356
+#, c-format
+msgid ""
+"Could not read the specified document\n"
+"%1$s\n"
+"due to the error: %2$s"
+msgstr ""
+"Kan ikkje lese det valde dokumentet\n"
+"%1$s\n"
+"på grunn av feilen: %2$s"
+
+#: src/BufferView.cpp:3358
+msgid "Could not read file"
+msgstr "Kan ikkje lese fila"
+
+#: src/BufferView.cpp:3365
+#, c-format
+msgid ""
+"%1$s\n"
+" is not readable."
+msgstr "Kan ikkje lese %1$s."
+
+#: src/BufferView.cpp:3366 src/output.cpp:39
+msgid "Could not open file"
+msgstr "Kan ikkje opnafila"
+
+#: src/BufferView.cpp:3373
+msgid "Reading not UTF-8 encoded file"
+msgstr "Les fil som ikkje er koda i UTF-8"
+
+#: src/BufferView.cpp:3374
+msgid ""
+"The file is not UTF-8 encoded.\n"
+"It will be read as local 8Bit-encoded.\n"
+"If this does not give the correct result\n"
+"then please change the encoding of the file\n"
+"to UTF-8 with a program other than LyX.\n"
+msgstr ""
+"Denne fila er ikkje koda i UTF-8.\n"
+"Vi les den som ei lokal 8-bit koda fil.\n"
+"Om dette gir feil teikn må du endre fila \n"
+"til UTF-8 i eit anna program.\n"
+
+#: src/Changes.cpp:375
+#, fuzzy
+msgid "Uncodable character in author initials"
+msgstr "Umogeleg teikn i namnet på forfattaren."
+
+#: src/Changes.cpp:376
+#, fuzzy, c-format
+msgid ""
+"The author initials '%1$s',\n"
+"used for change tracking, contain the following glyphs that\n"
+"cannot be represented in the current encoding: %2$s.\n"
+"These glyphs will be omitted in the exported LaTeX file.\n"
+"\n"
+"Choose an appropriate document encoding (such as utf8)\n"
+"or change the author initials."
+msgstr ""
+"Namnet til forfattaren '%1$s',\n"
+"er brukt i sporing av endringar, inneheld teikn som ikkje kan\n"
+"bli representert i den kodinga du nyttar: %2$s.\n"
+"Teikna vil ikkje bli lagra i LaTeX-fila.\n"
+"\n"
+"Vel heller ein koding av teikn (slik som utf8)\n"
+"eller endra namnet på forfattaren."
+
+#: src/Changes.cpp:405
+msgid "Uncodable character in author name"
+msgstr "Umogeleg teikn i namnet på forfattaren."
+
+#: src/Changes.cpp:406
+#, c-format
+msgid ""
+"The author name '%1$s',\n"
+"used for change tracking, contains the following glyphs that\n"
+"cannot be represented in the current encoding: %2$s.\n"
+"These glyphs will be omitted in the exported LaTeX file.\n"
+"\n"
+"Choose an appropriate document encoding (such as utf8)\n"
+"or change the spelling of the author name."
+msgstr ""
+"Namnet til forfattaren '%1$s',\n"
+"er brukt i sporing av endringar, inneheld teikn som ikkje kan\n"
+"bli representert i den kodinga du nyttar: %2$s.\n"
+"Teikna vil ikkje bli lagra i LaTeX-fila.\n"
+"\n"
+"Vel heller ein koding av teikn (slik som utf8)\n"
+"eller endra namnet på forfattaren."
+
+#: src/Chktex.cpp:65
+#, fuzzy, c-format
+msgid "ChkTeX warning id # %1$s"
+msgstr "ChkTeX åtvaring id # %1$d"
+
+#: src/Color.cpp:231 src/insets/InsetBibtex.cpp:192
+#: src/insets/InsetBibtex.cpp:211
+msgid "none"
+msgstr "ingen"
+
+#: src/Color.cpp:232
+msgid "black"
+msgstr "svart"
+
+#: src/Color.cpp:233
+msgid "white"
+msgstr "kvit"
+
+#: src/Color.cpp:234
+msgid "blue"
+msgstr "blå"
+
+#: src/Color.cpp:235
+#, fuzzy
+msgid "brown"
+msgstr "frown"
+
+#: src/Color.cpp:236
+msgid "cyan"
+msgstr "cyan"
+
+#: src/Color.cpp:237
+msgid "darkgray"
+msgstr ""
+
+#: src/Color.cpp:238
+#, fuzzy
+msgid "gray"
+msgstr "Svgråboks"
+
+#: src/Color.cpp:239
+msgid "green"
+msgstr "grøn"
+
+#: src/Color.cpp:240
+#, fuzzy
+msgid "lightgray"
+msgstr "Høgrejuster"
+
+#: src/Color.cpp:241
+msgid "lime"
+msgstr ""
+
+#: src/Color.cpp:242
+msgid "magenta"
+msgstr "magenta"
+
+#: src/Color.cpp:243
+msgid "olive"
+msgstr ""
+
+#: src/Color.cpp:244
+#, fuzzy
+msgid "orange"
+msgstr "Utval"
+
+#: src/Color.cpp:245
+msgid "pink"
+msgstr ""
+
+#: src/Color.cpp:246
+msgid "purple"
+msgstr ""
+
+#: src/Color.cpp:247
+msgid "red"
+msgstr "raud"
+
+#: src/Color.cpp:248
+msgid "teal"
+msgstr ""
+
+#: src/Color.cpp:249
+msgid "violet"
+msgstr ""
+
+#: src/Color.cpp:250
+msgid "yellow"
+msgstr "gul"
+
+#: src/Color.cpp:251
+msgid "cursor"
+msgstr "skrivemerke"
+
+#: src/Color.cpp:252
+msgid "background"
+msgstr "bakgrunn"
+
+#: src/Color.cpp:253
+msgid "text"
+msgstr "tekst"
+
+#: src/Color.cpp:254
+msgid "selection"
+msgstr "utval"
+
+#: src/Color.cpp:255
+msgid "selected text"
+msgstr "Valt tekst"
+
+#: src/Color.cpp:256
+msgid "LaTeX text"
+msgstr "LaTeX tekst"
+
+#: src/Color.cpp:257
+msgid "inline completion"
+msgstr "sluttføring i teksten"
+
+#: src/Color.cpp:259
+msgid "non-unique inline completion"
+msgstr "Ikkje unik sluttføring i teksten"
+
+#: src/Color.cpp:261
+msgid "previewed snippet"
+msgstr "Førehandvist bit"
+
+#: src/Color.cpp:262
+msgid "note label"
+msgstr "Notisetikett"
+
+#: src/Color.cpp:263
+msgid "note background"
+msgstr "notis bakgrunn"
+
+#: src/Color.cpp:264
+msgid "comment label"
+msgstr "Kommentaretikett"
+
+#: src/Color.cpp:265
+msgid "comment background"
+msgstr "bakgrunnen til kommandoar"
+
+#: src/Color.cpp:266
+msgid "greyedout inset label"
+msgstr "Gråfarga-innskot-etikett"
+
+#: src/Color.cpp:267
+msgid "greyedout inset text"
+msgstr "gråfarga-innskot"
+
+#: src/Color.cpp:268
+msgid "greyedout inset background"
+msgstr "Bakgrunnen til gråfarga-innskot"
+
+#: src/Color.cpp:269
+msgid "phantom inset text"
+msgstr "Fantom innskotekst"
+
+#: src/Color.cpp:270
+msgid "shaded box"
+msgstr "Skuggelagd ramme"
+
+#: src/Color.cpp:271
+msgid "listings background"
+msgstr "kodelistebakgrunn"
+
+#: src/Color.cpp:272
+msgid "branch label"
+msgstr "Greinetikett"
+
+#: src/Color.cpp:273
+msgid "footnote label"
+msgstr "fotnoteetikett"
+
+#: src/Color.cpp:274
+msgid "index label"
+msgstr "Indeksetikett"
+
+#: src/Color.cpp:275
+msgid "margin note label"
+msgstr "Marg-notis-etikett"
+
+#: src/Color.cpp:276
+msgid "URL label"
+msgstr "URL-Etikett"
+
+#: src/Color.cpp:277
+msgid "URL text"
+msgstr "URL-tekst"
+
+#: src/Color.cpp:278
+msgid "depth bar"
+msgstr "djupnmerke"
+
+#: src/Color.cpp:279
+#, fuzzy
+msgid "scroll indicator"
+msgstr "Skrivemerkei&ndikator"
+
+#: src/Color.cpp:280
+msgid "language"
+msgstr "språk"
+
+#: src/Color.cpp:281
+msgid "command inset"
+msgstr "kommando innskot"
+
+#: src/Color.cpp:282
+msgid "command inset background"
+msgstr "bakgrunnen til kommando innskot"
+
+#: src/Color.cpp:283
+msgid "command inset frame"
+msgstr "ramma til kommandoinnskot"
+
+#: src/Color.cpp:284
+#, fuzzy
+msgid "command inset (broken reference)"
+msgstr "ramma til kommandoinnskot"
+
+#: src/Color.cpp:285
+#, fuzzy
+msgid "button background (broken reference)"
+msgstr "bakgrunn på knappen med fokus"
+
+#: src/Color.cpp:286
+msgid "button frame (broken reference)"
+msgstr ""
+
+#: src/Color.cpp:287
+#, fuzzy
+msgid "button background (broken reference) under focus"
+msgstr "bakgrunn på knappen med fokus"
+
+#: src/Color.cpp:288
+msgid "special character"
+msgstr "spesialteikn"
+
+#: src/Color.cpp:289
+msgid "math"
+msgstr "matte"
+
+#: src/Color.cpp:290
+msgid "math background"
+msgstr "mattebakgrunn"
+
+#: src/Color.cpp:291
+msgid "graphics background"
+msgstr "grafikk -bakgrunn"
+
+#: src/Color.cpp:292 src/Color.cpp:296
+msgid "math macro background"
+msgstr "mattemakrobakgrunn"
+
+#: src/Color.cpp:293
+msgid "math frame"
+msgstr "matteramme"
+
+#: src/Color.cpp:294
+msgid "math corners"
+msgstr "mattehjørne"
+
+#: src/Color.cpp:295
+msgid "math line"
+msgstr "mattelinje"
+
+#: src/Color.cpp:297
+msgid "math macro hovered background"
+msgstr "flytande mattemakrobakgrunn"
+
+#: src/Color.cpp:298
+msgid "math macro label"
+msgstr "mattemakroetikett"
+
+#: src/Color.cpp:299
+msgid "math macro frame"
+msgstr "mattemakro-ramme"
+
+#: src/Color.cpp:300
+msgid "math macro blended out"
+msgstr "Halvgøymde mattemakroar"
+
+#: src/Color.cpp:301
+msgid "math macro old parameter"
+msgstr "Mattemakro med gammalt parameter"
+
+#: src/Color.cpp:302
+msgid "math macro new parameter"
+msgstr "Mattemakro med nytt parameter"
+
+#: src/Color.cpp:303
+#, fuzzy
+msgid "collapsible inset text"
+msgstr "Teksten til samanleggbar innskot"
+
+#: src/Color.cpp:304
+#, fuzzy
+msgid "collapsible inset frame"
+msgstr "Ramma til samanleggbar innskot"
+
+#: src/Color.cpp:305
+msgid "inset background"
+msgstr "Innskot bakgrunn"
+
+#: src/Color.cpp:306
+msgid "inset frame"
+msgstr "innskot ramme"
+
+#: src/Color.cpp:307
+msgid "LaTeX error"
+msgstr "LaTeX-feil"
+
+#: src/Color.cpp:308
+msgid "end-of-line marker"
+msgstr "linjesluttmerke"
+
+#: src/Color.cpp:309
+msgid "appendix marker"
+msgstr "Vedegg merke"
+
+#: src/Color.cpp:310
+msgid "change bar"
+msgstr "Linje for endring"
+
+#: src/Color.cpp:311
+#, fuzzy
+msgid "deleted text (output)"
+msgstr "Sletta tekst"
+
+#: src/Color.cpp:312
+#, fuzzy
+msgid "added text (output)"
+msgstr "Dato"
+
+#: src/Color.cpp:313
+#, fuzzy
+msgid "added text (workarea, 1st author)"
+msgstr "endra tekst 1. forfattar"
+
+#: src/Color.cpp:314
+#, fuzzy
+msgid "added text (workarea, 2nd author)"
+msgstr "endra tekst 2. forfattar"
+
+#: src/Color.cpp:315
+#, fuzzy
+msgid "added text (workarea, 3rd author)"
+msgstr "endra tekst 3. forfattar"
+
+#: src/Color.cpp:316
+#, fuzzy
+msgid "added text (workarea, 4th author)"
+msgstr "endra tekst 4. forfattar"
+
+#: src/Color.cpp:317
+#, fuzzy
+msgid "added text (workarea, 5th author)"
+msgstr "endra tekst 5. forfattar"
+
+#: src/Color.cpp:318
+#, fuzzy
+msgid "deleted text modifier (workarea)"
+msgstr "Sletta tekst endring"
+
+#: src/Color.cpp:319
+msgid "added space markers"
+msgstr "lagt til mellomrom markør"
+
+#: src/Color.cpp:320
+msgid "table line"
+msgstr "tabell-linje"
+
+#: src/Color.cpp:321
+msgid "table on/off line"
+msgstr "Tabell linja av/på"
+
+#: src/Color.cpp:322
+msgid "bottom area"
+msgstr "botnområde"
+
+#: src/Color.cpp:323
+msgid "new page"
+msgstr "ny side"
+
+#: src/Color.cpp:324
+msgid "page break / line break"
+msgstr "sideskift / linjeskift"
+
+#: src/Color.cpp:325
+#, fuzzy
+msgid "button frame"
+msgstr "Inga ramme"
+
+#: src/Color.cpp:326
+msgid "button background"
+msgstr "bakgrunn på knappen"
+
+#: src/Color.cpp:327
+msgid "button background under focus"
+msgstr "bakgrunn på knappen med fokus"
+
+#: src/Color.cpp:328
+msgid "paragraph marker"
+msgstr "Avsnittmarkør"
+
+#: src/Color.cpp:329
+msgid "preview frame"
+msgstr "ramme til førehandsvising"
+
+#: src/Color.cpp:330
+msgid "inherit"
+msgstr "arv"
+
+#: src/Color.cpp:331
+msgid "regexp frame"
+msgstr "regulæreuttrykk ramme"
+
+#: src/Color.cpp:332
+msgid "ignore"
+msgstr "ignorer"
+
+#: src/Converter.cpp:306
+#, c-format
+msgid ""
+"<p>The following LaTeX backend has been configured to allow execution of "
+"external programs for any document:</p><center><p><tt>%1$s</tt></p></"
+"center><p>This is a dangerous configuration. Please, consider using the "
+"support offered by LyX for allowing this privilege only to documents that "
+"actually need it, instead.</p>"
+msgstr ""
+
+#: src/Converter.cpp:315
+#, fuzzy
+msgid "Security Warning"
+msgstr "Neste åt&varing"
+
+#: src/Converter.cpp:328
+#, c-format
+msgid ""
+"<p>The following LaTeX backend has been requested to allow execution of "
+"external programs:</p><center><p><tt>%1$s</tt></p></center><p>The external "
+"programs can execute arbitrary commands on your system, including dangerous "
+"ones, if instructed to do so by a maliciously crafted LyX document.</p>"
+msgstr ""
+
+#: src/Converter.cpp:335
+#, c-format
+msgid ""
+"<p>The requested operation requires the use of a converter from %2$s to %3$s:"
+"</p><blockquote><p><tt>%1$s</tt></p></blockquote><p>This external program "
+"can execute arbitrary commands on your system, including dangerous ones, if "
+"instructed to do so by a maliciously crafted LyX document.</p>"
+msgstr ""
+
+#: src/Converter.cpp:345
+msgid "An external converter is disabled for security reasons"
+msgstr ""
+
+#: src/Converter.cpp:347
+msgid ""
+"<p><b>Your current preference settings forbid its execution.</b></p><p>(To "
+"change this setting, go to <i>Preferences ▹ File Handling ▹ "
+"Converters</i> and uncheck <i>Security ▹ Forbid needauth converters</"
+"i>.)"
+msgstr ""
+
+#: src/Converter.cpp:356
+msgid "A LaTeX backend requires your authorization"
+msgstr ""
+
+#: src/Converter.cpp:357
+msgid "An external converter requires your authorization"
+msgstr ""
+
+#: src/Converter.cpp:360
+msgid ""
+"<p>Should LaTeX backends be allowed to run external programs?</p><p><b>Allow "
+"them only if you trust the origin/sender of the LyX document!</b></p>"
+msgstr ""
+
+#: src/Converter.cpp:363
+msgid ""
+"<p>Would you like to run this converter?</p><p><b>Only run if you trust the "
+"origin/sender of the LyX document!</b></p>"
+msgstr ""
+
+#: src/Converter.cpp:367
+#, fuzzy
+msgid "Do ¬ allow"
+msgstr "Ikkje last"
+
+#: src/Converter.cpp:367
+#, fuzzy
+msgid "Do ¬ run"
+msgstr "Ikkje last"
+
+#: src/Converter.cpp:368
+#, fuzzy
+msgid "A&llow"
+msgstr "gul"
+
+#: src/Converter.cpp:368
+msgid "&Run"
+msgstr ""
+
+#: src/Converter.cpp:370
+#, fuzzy
+msgid "&Always allow for this document"
+msgstr "Lat att eller skjul dokumentet?"
+
+#: src/Converter.cpp:371
+#, fuzzy
+msgid "&Always run for this document"
+msgstr "Lat att eller skjul dokumentet?"
+
+#: src/Converter.cpp:441 src/Converter.cpp:686 src/Converter.cpp:715
+#, fuzzy
+msgid "Converter killed"
+msgstr "Eksportprogrammet brukar fil-lager"
+
+#: src/Converter.cpp:442 src/Converter.cpp:687 src/Converter.cpp:716
+#, c-format
+msgid ""
+"The following converter was killed by the user.\n"
+" %1$s\n"
+msgstr ""
+
+#: src/Converter.cpp:461 src/Converter.cpp:744 src/Converter.cpp:767
+#: src/Converter.cpp:809
+msgid "Cannot convert file"
+msgstr "Kan ikkje konvertere fila"
+
+#: src/Converter.cpp:462
+#, c-format
+msgid ""
+"No information for converting %1$s format files to %2$s.\n"
+"Define a converter in the preferences."
+msgstr ""
+"Ingen informasjon om korleis ein konverterer %1$s formatet til %2$s.\n"
+"Prøv å sett det opp sjølv i LyX-Val."
+
+#: src/Converter.cpp:567 src/frontends/qt/GuiDocument.cpp:1995
+msgid "Pygments driver command not found!"
+msgstr ""
+
+#: src/Converter.cpp:568 src/frontends/qt/GuiDocument.cpp:1996
+msgid ""
+"The driver command necessary to use the minted package\n"
+"(pygmentize) has not been found. Make sure you have\n"
+"the python-pygments module installed or, if the driver\n"
+"is named differently, to add the following line to the\n"
+"document preamble:\n"
+"\n"
+"\\AtBeginDocument{\\renewcommand{\\MintedPygmentize}{driver}}\n"
+"\n"
+"where 'driver' is name of the driver command."
+msgstr ""
+
+#: src/Converter.cpp:662 src/Format.cpp:706 src/Format.cpp:777
+msgid "Executing command: "
+msgstr "Køyrer kommando: "
+
+#: src/Converter.cpp:727
+#, fuzzy
+msgid "Process Killed"
+msgstr "&Hald fram"
+
+#: src/Converter.cpp:728
+#, fuzzy, c-format
+msgid ""
+"The conversion process was killed while running:\n"
+"%1$s"
+msgstr ""
+"Vi fekk ein feil når vi køyrde:\n"
+"%1$s"
+
+#: src/Converter.cpp:733
+msgid "Process Timed Out"
+msgstr ""
+
+#: src/Converter.cpp:734
+#, c-format
+msgid ""
+"The conversion process:\n"
+"%1$s\n"
+"timed out before completing."
+msgstr ""
+
+#: src/Converter.cpp:739
+msgid "Build errors"
+msgstr "Byggjefeil"
+
+#: src/Converter.cpp:740
+msgid "There were errors during the build process."
+msgstr "Det vart rapportert feil under bygginga."
+
+#: src/Converter.cpp:745
+#, c-format
+msgid ""
+"An error occurred while running:\n"
+"%1$s"
+msgstr ""
+"Vi fekk ein feil når vi køyrde:\n"
+"%1$s"
+
+#: src/Converter.cpp:768
+#, c-format
+msgid "Could not move a temporary directory from %1$s to %2$s."
+msgstr "Kunne ikkje flytte ei mellombels katalog frå %1$s til %2$s."
+
+#: src/Converter.cpp:811
+#, c-format
+msgid "Could not copy a temporary file from %1$s to %2$s."
+msgstr "Kunne ikkje flytte ei mellombels fil frå %1$s til %2$s."
+
+#: src/Converter.cpp:812
+#, c-format
+msgid "Could not move a temporary file from %1$s to %2$s."
+msgstr "Kunne ikkje flytte ei mellombels fil frå %1$s til %2$s."
+
+#: src/Converter.cpp:852
+msgid "Running LaTeX..."
+msgstr "Køyrer LaTeX..."
+
+#: src/Converter.cpp:869
+#, fuzzy
+msgid "Export canceled"
+msgstr "Klarte ikkje å eksportere"
+
+#: src/Converter.cpp:870
+msgid "The export process was terminated by the user."
+msgstr ""
+
+#: src/Converter.cpp:880
+#, fuzzy
+msgid "Undefined reference"
+msgstr "&Udefinerte greiner"
+
+#: src/Converter.cpp:881
+msgid ""
+"Undefined references or citations were found during the build.\n"
+"Please check the warnings in the LaTeX log (Document > LaTeX Log)."
+msgstr ""
+
+#: src/Converter.cpp:893
+#, c-format
+msgid ""
+"LaTeX did not run successfully. Additionally, LyX could not locate the LaTeX "
+"log %1$s."
+msgstr ""
+"Køyringa av LaTeX gjekk gale. Og i tillegg klarar ikkje LyX å finne LaTeX "
+"loggen %1$s."
+
+#: src/Converter.cpp:896 src/Converter.cpp:903
+msgid "LaTeX failed"
+msgstr "Feil ved LaTeX køyring"
+
+#: src/Converter.cpp:899
+#, c-format
+msgid ""
+"The external program\n"
+"%1$s\n"
+"finished with an error. It is recommended you fix the cause of the external "
+"program's error (check the logs). "
+msgstr ""
+
+#: src/Converter.cpp:905
+msgid "Output is empty"
+msgstr "Ingenting kom ut av konverteringa"
+
+#: src/Converter.cpp:906
+#, fuzzy
+msgid "No output file was generated."
+msgstr "Det vart berre laga ei tom fil."
+
+#: src/Cursor.cpp:418 src/Text.cpp:2008
+msgid ", Inset: "
+msgstr ", Innskot: "
+
+#: src/Cursor.cpp:419 src/Text.cpp:2010
+msgid ", Cell: "
+msgstr ""
+
+#: src/Cursor.cpp:420 src/Text.cpp:2013
+msgid ", Position: "
+msgstr ", plass: "
+
+#: src/CutAndPaste.cpp:209
+#, c-format
+msgid ""
+"The character \"%1$s\" is uncodable in this verbatim context and thus has "
+"not been pasted."
+msgstr ""
+
+#: src/CutAndPaste.cpp:213
+#, c-format
+msgid ""
+"The characters \"%1$s\" are uncodable in this verbatim context and thus have "
+"not been pasted."
+msgstr ""
+
+#: src/CutAndPaste.cpp:252
+#, fuzzy
+msgid "Uncodable content"
+msgstr "Det er teikn som ikkje kan kodast"
+
+#: src/CutAndPaste.cpp:436
+#, c-format
+msgid ""
+"The pasted branch \"%1$s\" is undefined.\n"
+"Do you want to add it to the document's branch list?"
+msgstr ""
+"Den kopierte greina \"%1$s\" finst ikkje.\n"
+"Vil du leggje den til dokumentet sine greiner?"
+
+#: src/CutAndPaste.cpp:439
+msgid "Unknown branch"
+msgstr "Ukjend grein"
+
+#: src/CutAndPaste.cpp:440
+msgid "&Don't Add"
+msgstr "&Ikkje legg til"
+
+#: src/CutAndPaste.cpp:829 src/Text.cpp:419
+#, c-format
+msgid "Layout `%1$s' was not found."
+msgstr "Stilen '%1$s' vart ikkje funnen."
+
+#: src/CutAndPaste.cpp:830 src/Text.cpp:420
+msgid "Layout Not Found"
+msgstr "Stil ikkje funnen"
+
+#: src/CutAndPaste.cpp:858
+#, c-format
+msgid "Flex inset %1$s is undefined after reloading `%2$s' layout."
+msgstr ""
+"Fleksibeltinnskot %1$s er ikkje definert fordi vi lasta inn igjen stilen "
+"%2$s."
+
+#: src/CutAndPaste.cpp:861
+#, c-format
+msgid ""
+"Flex inset %1$s is undefined because of conversion from `%2$s' layout to `"
+"%3$s'."
+msgstr ""
+"Fleksibeltinnskot %1$s er ikkje definert på grunn av konverteringa stilen "
+"til %2$s til %3$s."
+
+#: src/CutAndPaste.cpp:866
+msgid "Undefined flex inset"
+msgstr "Udefinert fleksibeltinnskot"
+
+#: src/Exporter.cpp:45
+#, c-format
+msgid ""
+"The file %1$s already exists.\n"
+"\n"
+"Do you want to overwrite that file?"
+msgstr ""
+"Dokumentet %1$s finst frå før.\n"
+"\n"
+"Vil du skrive over dette dokumentet?"
+
+#: src/Exporter.cpp:48
+msgid "Overwrite file?"
+msgstr "Skriv over dokumentet?"
+
+#: src/Exporter.cpp:50
+msgid "&Keep file"
+msgstr "&Ta vare på fila"
+
+#: src/Exporter.cpp:51
+msgid "Overwrite &all"
+msgstr "Skriv over &alt"
+
+#: src/Exporter.cpp:51 src/frontends/qt/GuiView.cpp:728
+msgid "&Cancel export"
+msgstr "&Avbryt eksport"
+
+#: src/Exporter.cpp:97
+msgid "Couldn't copy file"
+msgstr "Kan ikkje lage kopi av dokumentet"
+
+#: src/Exporter.cpp:98
+#, c-format
+msgid "Copying %1$s to %2$s failed."
+msgstr "Kan ikkje kopiere %1$s til %2$s."
+
+#: src/Font.cpp:141
+#, c-format
+msgid "Language: %1$s, "
+msgstr "Språk: %1$s, "
+
+#: src/Font.cpp:146
+#, c-format
+msgid "Number %1$s"
+msgstr "Nummerering %1$s"
+
+#: src/FontInfo.cpp:43 src/frontends/qt/GuiCharacter.cpp:150
+#: src/frontends/qt/GuiDocument.cpp:4827 src/frontends/qt/GuiListings.cpp:163
+msgid "Roman"
+msgstr "Romansk"
+
+#: src/FontInfo.cpp:43 src/frontends/qt/GuiCharacter.cpp:151
+#: src/frontends/qt/GuiDocument.cpp:4827 src/frontends/qt/GuiListings.cpp:163
+msgid "Sans Serif"
+msgstr "Sans Serif"
+
+#: src/FontInfo.cpp:43 src/frontends/qt/GuiCharacter.cpp:152
+#: src/frontends/qt/GuiDocument.cpp:4827 src/frontends/qt/GuiListings.cpp:163
+msgid "Typewriter"
+msgstr "Typewriter"
+
+#: src/FontInfo.cpp:43
+msgid "Symbol"
+msgstr "Symbol"
+
+#: src/FontInfo.cpp:45 src/FontInfo.cpp:48 src/FontInfo.cpp:51
+#: src/FontInfo.cpp:57 src/FontInfo.cpp:60
+msgid "Inherit"
+msgstr "Arv"
+
+#: src/FontInfo.cpp:48 src/frontends/qt/GuiCharacter.cpp:139
+msgid "Medium"
+msgstr "Middels"
+
+#: src/FontInfo.cpp:51 src/frontends/qt/GuiCharacter.cpp:54
+msgid "Upright"
+msgstr "Ståande"
+
+#: src/FontInfo.cpp:51 src/frontends/qt/GuiCharacter.cpp:55
+msgid "Italic"
+msgstr "Kursiv"
+
+#: src/FontInfo.cpp:51 src/frontends/qt/GuiCharacter.cpp:56
+msgid "Slanted"
+msgstr "Skråstilt"
+
+#: src/FontInfo.cpp:51
+msgid "Smallcaps"
+msgstr "Kapiteler"
+
+#: src/FontInfo.cpp:56 src/frontends/qt/GuiCharacter.cpp:77
+msgid "Increase"
+msgstr "Auk"
+
+#: src/FontInfo.cpp:56 src/frontends/qt/GuiCharacter.cpp:78
+msgid "Decrease"
+msgstr "Minsk"
+
+#: src/FontInfo.cpp:60
+msgid "Toggle"
+msgstr "Av/på"
+
+#: src/FontInfo.cpp:617
+#, c-format
+msgid "Emphasis %1$s, "
+msgstr "Utheva %1$s, "
+
+#: src/FontInfo.cpp:620
+#, c-format
+msgid "Underline %1$s, "
+msgstr "Strek under %1$s, "
+
+#: src/FontInfo.cpp:623
+#, c-format
+msgid "Double underline %1$s, "
+msgstr "To strek under %1$s, "
+
+#: src/FontInfo.cpp:626
+#, c-format
+msgid "Wavy underline %1$s, "
+msgstr "bølgjalinje under %1$s, "
+
+#: src/FontInfo.cpp:629
+#, fuzzy, c-format
+msgid "Strike out %1$s, "
+msgstr "Strek igjennom %1$s, "
+
+#: src/FontInfo.cpp:632
+#, fuzzy, c-format
+msgid "Cross out %1$s, "
+msgstr "Strek igjennom %1$s, "
+
+#: src/FontInfo.cpp:635
+#, c-format
+msgid "Noun %1$s, "
+msgstr "Kapitel %1$s, "
+
+#: src/Format.cpp:630 src/Format.cpp:643 src/Format.cpp:653
+msgid "Cannot view file"
+msgstr "Kan ikkje vise fila"
+
+#: src/Format.cpp:631 src/Format.cpp:723 src/frontends/qt/GuiView.cpp:3766
+#, c-format
+msgid "File does not exist: %1$s"
+msgstr "Finn ikkje fila.%1$s"
+
+#: src/Format.cpp:644
+#, c-format
+msgid "No information for viewing %1$s"
+msgstr "LyX veit ikkje korleis vise %1$s"
+
+#: src/Format.cpp:654
+#, c-format
+msgid "Auto-view file %1$s failed"
+msgstr "Klarte ikkje å automatisk syne %1$s"
+
+#: src/Format.cpp:722 src/Format.cpp:734 src/Format.cpp:747 src/Format.cpp:758
+msgid "Cannot edit file"
+msgstr "Kan ikkje endra dokumentet"
+
+#: src/Format.cpp:735
+msgid "LinkBack files can only be edited on Apple Mac OSX."
+msgstr "Lenkje-tilbake kan berre bli endra under Apple Mac OSX"
+
+#: src/Format.cpp:748
+#, c-format
+msgid "No information for editing %1$s"
+msgstr "LyX veit ikkje korleis ein endrar %1$s"
+
+#: src/Format.cpp:759
+#, c-format
+msgid "Auto-edit file %1$s failed"
+msgstr "Klarte ikkje å automatisk endre %1$s"
+
+#: src/KeyMap.cpp:229 src/KeyMap.cpp:244
+msgid "Could not find bind file"
+msgstr "Kan ikkje finne fila med innstillingar"
+
+#: src/KeyMap.cpp:230
+#, c-format
+msgid ""
+"Unable to find the bind file\n"
+"%1$s.\n"
+"Please check your installation."
+msgstr ""
+"Klarte ikkje å finne fila med innstillingar.\n"
+"%1$s.\n"
+"Sjekk LyX installasjonen din."
+
+#: src/KeyMap.cpp:237
+msgid "Could not find `cua.bind' file"
+msgstr "Kan ikkje finne 'cua.bind' fila"
+
+#: src/KeyMap.cpp:238
+msgid ""
+"Unable to find the default bind file `cua.bind'.\n"
+"Please check your installation."
+msgstr ""
+"Klarte ikkje å lese standardfila fila med innstillingar 'cua.bind'.\n"
+"Sjekk LyX installasjonen din."
+
+#: src/KeyMap.cpp:245
+#, c-format
+msgid ""
+"Unable to find the bind file\n"
+"%1$s.\n"
+"Falling back to default."
+msgstr ""
+"Klarte ikkje å finne fila med innstillingar.\n"
+"%1$s.\n"
+"Brukar standardfila i staden."
+
+#: src/KeySequence.cpp:181
+msgid " options: "
+msgstr " val: "
+
+#: src/LaTeX.cpp:62
+#, c-format
+msgid "Waiting for LaTeX run number %1$d"
+msgstr "Ventar på LaTeX køyring nummer %1$d"
+
+#: src/LaTeX.cpp:322 src/LaTeX.cpp:459
+msgid "Running Index Processor."
+msgstr "Lagar indeks med indeksmotoren."
+
+#: src/LaTeX.cpp:375 src/LaTeX.cpp:436
+msgid "Running BibTeX."
+msgstr "BibTeX køyrer."
+
+#: src/LaTeX.cpp:609
+msgid "Running MakeIndex for nomencl."
+msgstr "Køyrer MakeIndex for nomenklatur."
+
+#: src/LaTeX.cpp:1113
+msgid "(NOTE: The erroneous command is in the preamble)"
+msgstr ""
+
+#: src/LaTeX.cpp:1605 src/LaTeX.cpp:1611 src/LaTeX.cpp:1620
+msgid "BibTeX error: "
+msgstr "BibTeX-feil: "
+
+#: src/LaTeX.cpp:1627
+msgid "Biber error: "
+msgstr "Biberfeil: "
+
+#: src/LaTeX.cpp:1656
+#, fuzzy
+msgid "Makeindex error: "
+msgstr "Biberfeil: "
+
+#: src/LaTeX.cpp:1665
+#, fuzzy
+msgid "Xindy error: "
+msgstr "Biberfeil: "
+
+#: src/LaTeXFonts.cpp:238 src/LaTeXFonts.cpp:316
+msgid "Font not available"
+msgstr "Skrifttype er ikkje tilgjengeleg"
+
+#: src/LaTeXFonts.cpp:239 src/LaTeXFonts.cpp:317
+#, c-format
+msgid ""
+"The LaTeX package `%1$s' needed for the font `%2$s'\n"
+"is not available on your system. LyX will fall back to the default font."
+msgstr ""
+"LaTeX pakken `%1$s' trengs for skrifttypen`%2$s'\n"
+"men er ikkje tilgjengeleg. LyX will derfor bruke standard skrifttype."
+
+#: src/LyX.cpp:148
+msgid "Could not read configuration file"
+msgstr "Kan ikkje lese fila med innstillingar"
+
+#: src/LyX.cpp:149
+#, c-format
+msgid ""
+"Error while reading the configuration file\n"
+"%1$s.\n"
+"Please check your installation."
+msgstr ""
+"Klarte ikkje å lese fila med innstillingar.\n"
+"%1$s.\n"
+"Sjekk LyX installasjonen din."
+
+#: src/LyX.cpp:402
+msgid "The following files could not be loaded:"
+msgstr "Desse filene kunne ikkje bli lasta:"
+
+#: src/LyX.cpp:443
+#, c-format
+msgid "%1$s does not appear like a LyX created temporary directory."
+msgstr "%1$s er nok ikkje ein mellombelskatalog laga av LyX."
+
+#: src/LyX.cpp:445
+msgid "Cannot remove temporary directory"
+msgstr "Klarte ikkje å fjerna mellombelskatalogen"
+
+#: src/LyX.cpp:449
+#, c-format
+msgid "Unable to remove the temporary directory %1$s"
+msgstr "Klarte ikkje å fjerna mellombelskatalogen %1$s"
+
+#: src/LyX.cpp:478
+#, c-format
+msgid "Wrong command line option `%1$s'. Exiting."
+msgstr "Feil kommandolinje val:`%1$s'. Farvel."
+
+#: src/LyX.cpp:496
+msgid "Missing filename for this operation."
+msgstr "Manglar filnamn for denne operasjonen."
+
+#: src/LyX.cpp:545
+#, c-format
+msgid "LyX failed to load the following file: %1$s"
+msgstr "LyX klarte ikkje å laste fila:%1$s"
+
+#: src/LyX.cpp:592
+msgid "No textclass is found"
+msgstr "Kan ikkje finne tekstklassa"
+
+#: src/LyX.cpp:593
+msgid ""
+"LyX will only have minimal functionality because no textclasses have been "
+"found. You can either try to reconfigure LyX normally, try to reconfigure "
+"without checking your LaTeX installation, or continue."
+msgstr ""
+"LyX vil ha minimal funksjonalitet sidan ingen tekstklasser er funne. Du kan "
+"enten prøve å sette opp LyX normalt, prøve å sette opp utan å sjekke LaTeX "
+"installasjonen, eller fortsetje."
+
+#: src/LyX.cpp:597
+msgid "&Reconfigure"
+msgstr "&Set opp på nytt"
+
+#: src/LyX.cpp:598
+msgid "&Without LaTeX"
+msgstr "&utan LaTeX"
+
+#: src/LyX.cpp:599 src/VCBackend.cpp:969 src/VCBackend.cpp:973
+msgid "&Continue"
+msgstr "&Fortsett"
+
+#: src/LyX.cpp:702
+msgid ""
+"SIGHUP signal caught!\n"
+"Bye."
+msgstr ""
+"SIGHUP signal oppdaga!\n"
+"Adjø."
+
+#: src/LyX.cpp:706
+msgid ""
+"SIGFPE signal caught!\n"
+"Bye."
+msgstr ""
+"SIGFPE signal oppdaga!\n"
+"Adjø."
+
+#: src/LyX.cpp:709
+msgid ""
+"SIGSEGV signal caught!\n"
+"Sorry, you have found a bug in LyX, hope you have not lost any data.\n"
+"Please read the bug-reporting instructions in 'Help->Introduction' and send "
+"us a bug report, if necessary. Thanks!\n"
+"Bye."
+msgstr ""
+"SIGSEGV signal oppdaga!\n"
+"Orsak, du har komt over ein feil i LyX, vi vonar at du ikkje har mista noko "
+"arbeid.\n"
+"Om du vil rapportere feilen så skal du lese instruksjonane om korleis varsle "
+"feil under: Hjelp->Introduksjon og sende oss ei feilmelding. Takk på "
+"førehand!\n"
+"Adjø."
+
+#: src/LyX.cpp:725
+msgid "LyX crashed!"
+msgstr "LyX krasja!"
+
+#: src/LyX.cpp:759
+msgid "LyX: "
+msgstr "LyX: "
+
+#: src/LyX.cpp:1027
+msgid "Could not create temporary directory"
+msgstr "Klarte ikkje å laga mellombelskatalog"
+
+#: src/LyX.cpp:1028
+#, c-format
+msgid ""
+"Could not create a temporary directory in\n"
+"\"%1$s\"\n"
+"Make sure that this path exists and is writable and try again."
+msgstr ""
+"Kan ikkje lage mellombelskatalog i\n"
+"%1$s.\n"
+"Ver sikker på at stigen finst \n"
+"og er skrivbar og prøv igjen."
+
+#: src/LyX.cpp:1092
+msgid "Missing user LyX directory"
+msgstr "Manglar brukerstig for LyX"
+
+#: src/LyX.cpp:1093
+#, c-format
+msgid ""
+"You have specified a non-existent user LyX directory, %1$s.\n"
+"It is needed to keep your own configuration."
+msgstr ""
+"Du har sett ein brukarstig for LyX som ikkje eksisterar %1$s.\n"
+"LyX treng den for å lagre vala dine."
+
+#: src/LyX.cpp:1098
+msgid "&Create directory"
+msgstr "&Lag katalog"
+
+#: src/LyX.cpp:1099
+msgid "&Exit LyX"
+msgstr "&Skru av LyX"
+
+#: src/LyX.cpp:1100
+msgid "No user LyX directory. Exiting."
+msgstr "Ingen brukarstig for LyX. Stoppar."
+
+#: src/LyX.cpp:1104
+#, c-format
+msgid "LyX: Creating directory %1$s"
+msgstr "LyX: Lagar katalogen %1$s"
+
+#: src/LyX.cpp:1109
+msgid "Failed to create directory. Exiting."
+msgstr "Klarte ikkje å lage katalog. Stoppar."
+
+#: src/LyX.cpp:1182
+msgid "List of supported debug flags:"
+msgstr "Liste over val ved avlusing:"
+
+#: src/LyX.cpp:1186
+#, c-format
+msgid "Setting debug level to %1$s"
+msgstr "Set nivået til avlusinga til %1$s"
+
+#: src/LyX.cpp:1197
+#, fuzzy
+msgid ""
+"Usage: lyx [ command line switches ] [ name.lyx ... ]\n"
+"Command line switches (case sensitive):\n"
+"\t-help summarize LyX usage\n"
+"\t-userdir dir set user directory to dir\n"
+"\t-sysdir dir set system directory to dir\n"
+"\t-geometry WxH+X+Y set geometry of the main window\n"
+"\t-dbg feature[,feature]...\n"
+" select the features to debug.\n"
+" Type `lyx -dbg' to see the list of features\n"
+"\t-x [--execute] command\n"
+" where command is a lyx command.\n"
+"\t-e [--export] fmt\n"
+" where fmt is the export format of choice. Look in\n"
+" Tools->Preferences->File Handling->File Formats->Short "
+"Name\n"
+" to see which parameter (which differs from the format "
+"name\n"
+" in the File->Export menu) should be passed. To export to\n"
+" the document's default output format, use 'default'.\n"
+" Note that the order of -e and -x switches matters.\n"
+"\t-E [--export-to] fmt filename\n"
+" where fmt is the export format of choice (see --export),\n"
+" and filename is the destination filename.\n"
+"\t-i [--import] fmt file.xxx\n"
+" where fmt is the import format of choice\n"
+" and file.xxx is the file to be imported.\n"
+"\t-f [--force-overwrite] what\n"
+" where what is either `all', `main' or `none',\n"
+" specifying whether all files, main file only, or no "
+"files,\n"
+" respectively, are to be overwritten during a batch "
+"export.\n"
+" Anything else is equivalent to `all', but is not "
+"consumed.\n"
+"\t--ignore-error-message which\n"
+" allows you to ignore specific LaTeX error messages.\n"
+" Do not use for final documents! Currently supported "
+"values:\n"
+" * missing_glyphs: Fontspec `missing glyphs' error.\n"
+"\t-n [--no-remote]\n"
+" open documents in a new instance\n"
+"\t-r [--remote]\n"
+" open documents in an already running instance\n"
+" (a working lyxpipe is needed)\n"
+"\t-v [--verbose]\n"
+" report on terminal about spawned commands.\n"
+"\t-batch execute commands without launching GUI and exit.\n"
+"\t-version summarize version and build info\n"
+"Check the LyX man page for more details."
+msgstr ""
+"Bruk: lyx [ kommando linje val ] [ namn.lyx ... ]\n"
+"Kommando linje val (hugs store og små bokstavar):\n"
+"\t-help samandrag av lyx kommandoen\n"
+"\t-userdir dir prøv å bruke stig som brukar-stig\n"
+"\t-sysdir dir prøv å bruke stig som system-stig\n"
+"\t-geometry WxH+X+Y set storleiken til LyX dialogen\n"
+"\t-dbg feature[,feature]...\n"
+" Vel del for avlusing.\n"
+" Skriv `lyx -dbg' for liste over val\n"
+"\t-x [--execute] kommando\n"
+" Der kommandoen er ein LyX-kommando.\n"
+"\t-e [--export] fmt\n"
+" der fmt er det ønska eksportformatet.\n"
+" Sjå Verkty->LyX-val->Fil-format->Kort namn\n"
+" for å få ei oversikt over format.(skil seg frå Fil-"
+">Eksporter).\n"
+"Pass på rekkefølgja på -e og -x\n"
+"\t-E [--export-to] fmt filename\n"
+" der fmt er det ønska eksportformatet. (sjå --export),\n"
+" og filnamnet er namnet på den nye fila.\n"
+"\t-i [--import] fmt fil.xxx\n"
+" der fmt er det ønska importformatet\n"
+" og fil.xxx er fila som skal bli importert.\n"
+"\t-f [--force-overwrite] kva\n"
+" Der kva er \"all\", \"main\" eller \"none\",\n"
+" \"all\" skriv over alle filer er overskreve ved eksport, "
+"med \"main\" blir berre hovuddokumentet overskriven og "
+"\"none\" blir ingen filer blir overskriven. Alt anna blir oppfatta som \"all"
+"\", men er ikkje konsumert.\n"
+"\t-n [--no-remote]\n"
+" opnar dokument som nye instansar\n"
+"\t-r [--remote]+n opnar dokument i ein open instans\n"
+" (du treng lyxpipe som fungerer)\n"
+"\t-batch utfør kommandoar utan eit grafiskgrensesnitt\n"
+"\t-version samandrag av versjon og byggje info\n"
+"Sjå `man' sida til LyX for meir informasjon."
+
+#: src/LyX.cpp:1250 src/frontends/qt/GuiAbout.cpp:213
+msgid " Git commit hash "
+msgstr ""
+
+#: src/LyX.cpp:1261 src/support/Package.cpp:647
+msgid "No system directory"
+msgstr "Ingen systemkatalog"
+
+#: src/LyX.cpp:1262
+msgid "Missing directory for -sysdir switch"
+msgstr "Manglar katalog for -sysdir val"
+
+#: src/LyX.cpp:1273
+msgid "No user directory"
+msgstr "Ingen brukar katalog"
+
+#: src/LyX.cpp:1274
+msgid "Missing directory for -userdir switch"
+msgstr "Manglar katalog for -userdir val"
+
+#: src/LyX.cpp:1285
+msgid "Incomplete command"
+msgstr "Kommando er ikkje komplett"
+
+#: src/LyX.cpp:1286
+msgid "Missing command string after --execute switch"
+msgstr "Manglar kommando etter --execute val"
+
+#: src/LyX.cpp:1297
+msgid "Missing file type [eg latex, ps...] after --export-to switch"
+msgstr "Manglar filtype [t.d. latex, ps...] etter --export-to val"
+
+#: src/LyX.cpp:1302
+msgid "Missing destination filename after --export-to switch"
+msgstr "Manglar filnamn etter --export-to val"
+
+#: src/LyX.cpp:1315
+msgid "Missing file type [eg latex, ps...] after --export switch"
+msgstr "Manglar filtype [t.d. latex, ps...] etter --export val"
+
+#: src/LyX.cpp:1328
+msgid "Missing file type [eg latex, ps...] after --import switch"
+msgstr "Manglar filtype [t.d. latex, ps...] etter --import val"
+
+#: src/LyX.cpp:1333
+msgid "Missing filename for --import"
+msgstr "Manglar filnamn for --import"
+
+#: src/LyXRC.cpp:2986
+msgid ""
+"Consider run-together words, such as \"diskdrive\" for \"disk drive\", as "
+"legal words?"
+msgstr ""
+"La samanskrivne ord slik som \"helikoptersjøførsertifikat\"vere korrekt?"
+
+#: src/LyXRC.cpp:2990
+msgid ""
+"Specify an alternate language. The default is to use the language of the "
+"document."
+msgstr "Vel eit alternativt språk. Standarden er å bruke språket i dokumentet."
+
+#: src/LyXRC.cpp:2998
+msgid ""
+"De-select if you don't want the current selection to be replaced "
+"automatically by what you type."
+msgstr "Vil du erstatta merka teksten med ny tekst du skriv inn?"
+
+#: src/LyXRC.cpp:3002
+msgid ""
+"De-select if you don't want the class options to be reset to defaults after "
+"class change."
+msgstr ""
+"Vil du at standardvala for den nye klassa skal gjelde for dokumentet nå du "
+"bytter klasse."
+
+#: src/LyXRC.cpp:3006
+msgid ""
+"The time interval between auto-saves (in seconds). 0 means no auto-save."
+msgstr ""
+"Kor lang tid mellom kvar automatiske lagring (i sekund). 0 skrur av "
+"automatisk lagring."
+
+#: src/LyXRC.cpp:3013
+msgid ""
+"The path for storing backup files. If it is an empty string, LyX will store "
+"the backup file in the same directory as the original file."
+msgstr ""
+"Stigen til reservekopiane. Om ingen stig er gitt, vil reservekopiane bli "
+"lagt i den same katalogen som original fila."
+
+#: src/LyXRC.cpp:3017
+msgid ""
+"Define the options of bibtex (cf. man bibtex) or select an alternative "
+"compiler (e.g. mlbibtex or bibulus)."
+msgstr ""
+"Gi vala for BibTeX (sjå man bibtex) eller vel ein annan litteraturhandsamar "
+"slik som mlbibtex eller bibulus."
+
+#: src/LyXRC.cpp:3021
+msgid "Define the options of the bibtex program for PLaTeX (Japanese LaTeX)."
+msgstr "Vel BibTeX val for PLaTeX (Japansk)."
+
+#: src/LyXRC.cpp:3025
+msgid ""
+"Keybindings file. Can either specify an absolute path, or LyX will look in "
+"its global and local bind/ directories."
+msgstr ""
+"Fila for tastaurbindingar. Gje anten ein stig til ei fil eller så vil LyX "
+"bruke filer frå dei globale og lokale bindingskatalogar."
+
+#: src/LyXRC.cpp:3029
+msgid "Select to check whether the lastfiles still exist."
+msgstr "Sjekk at dei sist opna filene finst enno."
+
+#: src/LyXRC.cpp:3033
+msgid ""
+"Define how to run chktex. E.g. \"chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -n30 -"
+"n38\" Refer to the ChkTeX documentation."
+msgstr ""
+"Korleis skal vi køyre ChkTeX? T.d: \"chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -"
+"n30 -n38\". Ver god og les ChkTeX dokumentasjonen."
+
+#: src/LyXRC.cpp:3040
+msgid ""
+"Forbid use of external converters with 'needauth' option to prevent "
+"undesired effects."
+msgstr ""
+
+#: src/LyXRC.cpp:3044
+msgid ""
+"Ask user before calling external converters with 'needauth' option to "
+"prevent undesired effects."
+msgstr ""
+
+#: src/LyXRC.cpp:3051
+msgid ""
+"LyX normally doesn't update the cursor position if you move the scrollbar. "
+"Set to true if you'd prefer to always have the cursor on screen."
+msgstr ""
+"La skrivemerket alltid vera på skjermen når du nyttar rullefeltet. LyX "
+"endrar vanlegvis ikkje plassen til skrivemerket."
+
+#: src/LyXRC.cpp:3059
+msgid ""
+"LyX normally doesn't allow the user to scroll further than the bottom of the "
+"document. Set to true if you prefer to scroll the bottom of the document to "
+"the top of the screen"
+msgstr ""
+"LyX gjer deg vanlegvis ikkje lov til å rulle dokumentet lengre enn til "
+"slutten av dokumentet. Dersom du ønskjer å rulle slutten av dokumentet heilt "
+"opp i vindauge vel du denne."
+
+#: src/LyXRC.cpp:3063
+msgid "Make Apple key act as Meta and Control key as Ctrl."
+msgstr "Gjer slik at epletast er meta og Kontrolltast som Ctrl"
+
+#: src/LyXRC.cpp:3067
+msgid "Use the Mac OS X conventions for cursor movement"
+msgstr "Bruk MAC OSX oppførsel for peikar rørslene"
+
+#: src/LyXRC.cpp:3071
+msgid ""
+"Show a small box around a Math Macro with the macro name when the cursor is "
+"inside."
+msgstr ""
+"Vis ei lita ramme rundt mattemakroen med namnet på makroen når peikaren er "
+"inne i."
+
+#: src/LyXRC.cpp:3075
+msgid ""
+"Command definition file. Can either specify an absolute path, or LyX will "
+"look in its global and local commands/ directories."
+msgstr ""
+"Fila for kommandoar. Gje anten ein stig til ei fil eller så vil LyX bruke "
+"filer frå dei globale og lokale kommando/ stigane."
+
+#: src/LyXRC.cpp:3079
+msgid ""
+"The default format used with LFUN_BUFFER_[VIEW|UPDATE] with non-TeX fonts."
+msgstr ""
+"Vel standard format for bruk med LFUN_BUFFER_[VIEW|UPDATE] med ikkje TeX "
+"skrifttypar."
+
+#: src/LyXRC.cpp:3083
+msgid "The default format used with LFUN_BUFFER_[VIEW|UPDATE]."
+msgstr "Vel standard format for bruk med LFUN_BUFFER_[VIEW|UPDATE]."
+
+#: src/LyXRC.cpp:3087
+msgid ""
+"Iconify the dialogs when the main window is iconified. (Affects only dialogs "
+"shown after the change has been made.)"
+msgstr ""
+"Legg ned barnevindauge saman med hovudvindauge. (gjeld berre barnevindauge "
+"oppretta etter endringa)."
+
+#: src/LyXRC.cpp:3091
+msgid "Select how LyX will display any graphics."
+msgstr "Vel korleis LyX skal vise grafikk."
+
+#: src/LyXRC.cpp:3095
+msgid ""
+"The default path for your documents. An empty value selects the directory "
+"LyX was started from."
+msgstr ""
+"Standard stigen til dokumenta dine. Er standard stigen tom, blir "
+"dokumentstigen den same stigen som LyX vart starta i."
+
+#: src/LyXRC.cpp:3099
+msgid "Specify additional chars that can be part of a word."
+msgstr "Vel uvanlege bokstavar som kan vere ein del av eit ord."
+
+#: src/LyXRC.cpp:3103
+msgid ""
+"The path that LyX will set when offering to choose an example. An empty "
+"value selects the directory LyX was started from."
+msgstr ""
+"Stigen til eksempel. Er eksempelstigen tom, blir stigen den same stigen som "
+"LyX vart starta i."
+
+#: src/LyXRC.cpp:3110
+msgid ""
+"Define the options of makeindex (cf. man makeindex) or select an alternative "
+"compiler. E.g., using xindy/make-rules, the command string would be "
+"\"makeindex.sh -m $$lang\"."
+msgstr ""
+"Gi vala for makeindex (sjå man makeindex) eller vel ein anna indeksprogram. "
+"Dvs dersom du brukar xindy/make-rule vil val vere \"makeindex.sh -m $$lang"
+"\"."
+
+#: src/LyXRC.cpp:3114
+msgid "Define the options of the index program for PLaTeX (Japanese LaTeX)."
+msgstr "Vala for indeksmotoren for PLaTeX (Japansk)."
+
+#: src/LyXRC.cpp:3118
+msgid ""
+"Define the options of makeindex (cf. man makeindex) to be used for "
+"nomenclatures. This might differ from the index processing options."
+msgstr ""
+"Vala for makeindex (sjå man makeindex) for å bli brukt med nomenklatur. "
+"Desse kan vere ulike frå vala for indeksmotoren."
+
+#: src/LyXRC.cpp:3122
+msgid "The command to run the python pygments syntax highlighter."
+msgstr ""
+
+#: src/LyXRC.cpp:3131
+msgid ""
+"Use this to set the correct mapping file for your keyboard. You'll need this "
+"if you for instance want to type German documents on an American keyboard."
+msgstr ""
+"Bruk dette for å bruke rett tastaturoversikt-fil. Du treng dette dersom du "
+"ønskjer å skrive tyske dokument med norsk tastatur."
+
+#: src/LyXRC.cpp:3135
+msgid ""
+"Select if a language switching command is needed at the beginning of the "
+"document."
+msgstr "Trengs det ein språk endring først i dokumentet?"
+
+#: src/LyXRC.cpp:3139
+msgid ""
+"Select if a language switching command is needed at the end of the document."
+msgstr "Trengs det ein språk endring sist i dokumentet?"
+
+#: src/LyXRC.cpp:3143
+msgid ""
+"The LaTeX command for changing from the language of the document to another "
+"language. E.g. \\selectlanguage{$$lang} where $$lang is substituted by the "
+"name of the second language."
+msgstr ""
+"LaTeX kommandoen som bytter frå standard språket i ei dokument til eit "
+"alternativt språk. t.d \\selectlanguage{$$lang} der $$lang blir bytta ut "
+"med namnet på det alternative språket."
+
+#: src/LyXRC.cpp:3147
+msgid "The LaTeX command for changing back to the language of the document."
+msgstr "LaTeX kommandoen for å gå tilbake til standard språket."
+
+#: src/LyXRC.cpp:3151
+msgid "The LaTeX command for local changing of the language."
+msgstr "LaTeX kommandoen for lokal endring av språket."
+
+#: src/LyXRC.cpp:3155
+msgid ""
+"De-select if you don't want the language(s) used as an argument to "
+"\\documentclass."
+msgstr "La språka bli eit argument i \\documentclass."
+
+#: src/LyXRC.cpp:3159
+msgid ""
+"The LaTeX command for loading the language package. E.g. "
+"\"\\usepackage{babel}\", \"\\usepackage{omega}\"."
+msgstr ""
+"LaTeX kommandoen for å laste språk-pakken. T.d.: \"\\usepackage{babel}\", "
+"\"\\usepackage{omega}\"."
+
+#: src/LyXRC.cpp:3163
+msgid ""
+"De-select if you don't want babel to be used when the language of the "
+"document is the default language."
+msgstr "Bruk babel saman med dokument i standard språket."
+
+#: src/LyXRC.cpp:3167
+msgid "De-select if you do not want LyX to scroll to saved position."
+msgstr "Vel om du vil at LyX skal ta reservekopiar."
+
+#: src/LyXRC.cpp:3171
+msgid "De-select to prevent loading files opened from the last LyX session."
+msgstr "Vel om du vil laste filane frå førre gang du brukte LyX automatisk."
+
+#: src/LyXRC.cpp:3175
+msgid "De-select if you don't want LyX to create backup files."
+msgstr "Vel om du vil at LyX skal ta reservekopiar."
+
+#: src/LyXRC.cpp:3179
+msgid ""
+"Select to control the highlighting of words with a language foreign to that "
+"of the document."
+msgstr ""
+"Gje ord på eit anna språk enn standard språket i dokumentet ein annan farge."
+
+#: src/LyXRC.cpp:3187
+msgid "The scrolling speed of the mouse wheel."
+msgstr "Rullefarta på musehjulet"
+
+#: src/LyXRC.cpp:3191
+msgid "The completion popup delay."
+msgstr "Vent på sprettoppsluttføring"
+
+#: src/LyXRC.cpp:3195
+msgid "Select to display the completion popup in math mode."
+msgstr "Vel for sprettoppsluttføring i mattemodus"
+
+#: src/LyXRC.cpp:3199
+msgid "Select to display the completion popup in text mode."
+msgstr "Vel for sprettoppsluttføring i tekstmodus"
+
+#: src/LyXRC.cpp:3203
+msgid ""
+"Show the completion popup without delay after non-unique completion attempt."
+msgstr "Vis sprettopp med det same ved ikkje unike sluttføringsalternativ .."
+
+#: src/LyXRC.cpp:3207
+msgid ""
+"Show a small triangle on the cursor to indicate that a completion is "
+"available."
+msgstr "Vis ein liten trekant i skrivemerket dersom sluttføring er mogeleg."
+
+#: src/LyXRC.cpp:3211
+msgid "The inline completion delay."
+msgstr "Vent på sluttføring i teksten"
+
+#: src/LyXRC.cpp:3215
+msgid "Select to display the inline completion in math mode."
+msgstr "Vel for sluttføring i teksten i mattemodus"
+
+#: src/LyXRC.cpp:3219
+msgid "Select to display the inline completion in text mode."
+msgstr "Vel for sluttføring i teksten i tekstmodus"
+
+#: src/LyXRC.cpp:3223
+msgid "Use \"...\" to shorten long completions."
+msgstr "Bruk \"...\" for å korte lange alternativ."
+
+#: src/LyXRC.cpp:3227
+msgid "Allow TeXMacs shorthand, like => converting to \\Rightarrow."
+msgstr "Bruk TeXMacs forkortingar, slik som å gjere om => til \\Rightarrows"
+
+#: src/LyXRC.cpp:3231
+#, c-format
+msgid "Maximal number of lastfiles. Up to %1$d can appear in the file menu."
+msgstr ""
+"Kor mange sist opna filer skal vere tilgjengeleg i filmenyen (opp til %1$d)."
+
+#: src/LyXRC.cpp:3236
+msgid ""
+"Specify those directories which should be prepended to the PATH environment "
+"variable.\n"
+"Use the OS native format."
+msgstr ""
+"Kva for mapper skal ha PATH-miljøet framfor seg. Bruk formatet for "
+"operativsystemet."
+
+#: src/LyXRC.cpp:3242
+msgid "Shows a typeset preview of things such as math"
+msgstr "Vis førehandsvising av typesettet av slike ting som matte"
+
+#: src/LyXRC.cpp:3246
+msgid "Previewed equations will have \"(#)\" labels rather than numbered ones"
+msgstr ""
+"Førehandsvising av likningar vil ha \"(#)\"-merke istaden for nummererte."
+
+#: src/LyXRC.cpp:3250
+msgid "Scale the preview size to suit."
+msgstr "La førehandsvising bli skalert etter høvet."
+
+#: src/LyXRC.cpp:3254
+msgid "The option to print out in landscape."
+msgstr "Skriv ut liggjande sider."
+
+#: src/LyXRC.cpp:3258
+msgid "Option to specify the dimensions of the print paper."
+msgstr "Kva dimensjonar er det på papiret som det skal skrivast ut på."
+
+#: src/LyXRC.cpp:3262
+msgid "The option to specify paper type."
+msgstr "Kva slags papir skal det skrivast ut på."
+
+#: src/LyXRC.cpp:3266
+msgid ""
+"Select to have visual bidi cursor movement, unselect for logical movement."
+msgstr "Vel for to-vegs peikarrørsle, elles får du logisk rørsle."
+
+#: src/LyXRC.cpp:3270
+msgid ""
+"Specify whether, closing the last view of an open document, LyX should close "
+"the document (yes), hide it (no), or ask the user (ask)."
+msgstr ""
+"Når du lukker det siste instansen av eit ope dokument, skal Lyx lukke "
+"dokumentet (ja), skjule det (nei), eller spør kvar gang (spør)."
+
+#: src/LyXRC.cpp:3274
+msgid ""
+"DPI (dots per inch) of your monitor is auto-detected by LyX. If that goes "
+"wrong, override the setting here."
+msgstr ""
+"DPI (Oppløysing) å skjermen er vanlegvis automatisk i LyX. Dersom du vil ha "
+"ein annan oppløysing kan du sette det her."
+
+#: src/LyXRC.cpp:3280
+msgid "The screen fonts used to display the text while editing."
+msgstr "Skjermskrifttype som blir brukt til redigering av tekst."
+
+#: src/LyXRC.cpp:3289
+msgid ""
+"Allow bitmap fonts to be resized. If you are using a bitmap font, selecting "
+"this option may make some fonts look blocky in LyX. Deselecting this option "
+"makes LyX use the nearest bitmap font size available, instead of scaling."
+msgstr ""
+"Tilat å endre storleiken til prikkteikna skrifttypar. Dette kan føre til at "
+"bokstavane i LyX blir stygge og firkanta. Om ikkje endring av storleiken er "
+"tilete vil LyX bruke den næraste skriftstorleiken."
+
+#: src/LyXRC.cpp:3293
+msgid "The font sizes used for calculating the scaling of the screen fonts."
+msgstr ""
+"Storleiken på skrifttypane som blir brukt for å utrekning av skjerm "
+"skrifttypane."
+
+#: src/LyXRC.cpp:3298
+#, no-c-format
+msgid ""
+"The zoom percentage for screen fonts. A setting of 100% will make the fonts "
+"roughly the same size as on paper."
+msgstr ""
+"Forstørring for skjermskrifttypar. 100% er om lag like stort som på arket."
+
+#: src/LyXRC.cpp:3302
+msgid "Allow session manager to save and restore windows geometry."
+msgstr "Gjer vindauge like stort kvar gang du startar LyX."
+
+#: src/LyXRC.cpp:3306
+msgid ""
+"This starts the lyxserver. The pipes get an additional extension \".in\" and "
+"\".out\". Only for advanced users."
+msgstr ""
+"Dette startar LyXServer. Datarøyra gir ekstra integrasjon med andre program. "
+"Mest for røynde brukarar."
+
+#: src/LyXRC.cpp:3313
+msgid "De-select if you don't want the startup banner."
+msgstr "Vis startopp bilete."
+
+#: src/LyXRC.cpp:3317
+msgid ""
+"LyX will place its temporary directories in this path. They will be deleted "
+"when you quit LyX."
+msgstr ""
+"Stigen til mellombels filer. Er mellombelsstigen tom, blir stigen den same "
+"stigen som LyX vart starta i."
+
+#: src/LyXRC.cpp:3321
+msgid "This is the place where the files of the thesaurus library reside."
+msgstr "Dette er kor filene til synonymordboka er."
+
+#: src/LyXRC.cpp:3325
+msgid ""
+"The path that LyX will set when offering to choose a template. An empty "
+"value selects the directory LyX was started from."
+msgstr ""
+"Stigen til malane. Er malstigen tom, blir stigen den same stigen som LyX "
+"vart starta i."
+
+#: src/LyXRC.cpp:3335
+msgid ""
+"Specify those directories which should be prepended to the TEXINPUTS "
+"environment variable.\n"
+"A '.' represents the current document directory. Use the OS native format."
+msgstr ""
+"Kva for stigar skal TEXINPUTS miljø variabelen lagt tilframfor seg. \n"
+"Ein '.' er den gjeldande dokument stigen. Bruk standarden for "
+"operativsystemet."
+
+#: src/LyXRC.cpp:3342
+msgid ""
+"The UI (user interface) file. Can either specify an absolute path, or LyX "
+"will look in its global and local ui/ directories."
+msgstr ""
+"UI-fila (Brukarmiljøet). Gje anten ein stig til ei fil eller så vil LyX "
+"bruke filer frå dei globale og lokale ui-katalogane."
+
+#: src/LyXRC.cpp:3352
+msgid ""
+"Enable use the system colors for some things like main window background and "
+"selection."
+msgstr "Bruk systemfargar for slikt som bakgrunnen til vindauge og utval"
+
+#: src/LyXRC.cpp:3356
+msgid "Enable the automatic appearance of tool tips in the work area."
+msgstr "Gjev automatisk hjelp i arbeidsområde."
+
+#: src/LyXRC.cpp:3360
+msgid "Specify the paper command to DVI viewer (leave empty or use \"-paper\")"
+msgstr ""
+"Papir meldinga til DVI-framsynar (La den vere tom eller bruk \"-paper\")"
+
+#: src/LyXVC.cpp:49
+#, fuzzy, c-format
+msgid "%1$s lock"
+msgstr "%1$s filer."
+
+#: src/LyXVC.cpp:111
+#, c-format
+msgid "Do you want to retrieve the document %1$s from version control?"
+msgstr "Vil du laste inn dokumentet %1$s frå versjonkontroll?"
+
+#: src/LyXVC.cpp:113
+msgid "Retrieve from version control?"
+msgstr "Vil du laste inn frå versjonkontroll?"
+
+#: src/LyXVC.cpp:114
+msgid "&Retrieve"
+msgstr "&Hent inn"
+
+#: src/LyXVC.cpp:148
+msgid "Document not saved"
+msgstr "Dokumentet er ikkje lagra!"
+
+#: src/LyXVC.cpp:149
+msgid "You must save the document before it can be registered."
+msgstr "Du må lagra dokumentet før du kan registrere det."
+
+#: src/LyXVC.cpp:185
+msgid "LyX VC: Initial description"
+msgstr "LyX VK: Omtale av dokumentet"
+
+#: src/LyXVC.cpp:186 src/LyXVC.cpp:193
+msgid "(no initial description)"
+msgstr "(ingen skildring)"
+
+#: src/LyXVC.cpp:205 src/LyXVC.cpp:224
+msgid "LyX VC: Log message"
+msgstr "LyX VK: Loggmelding"
+
+#: src/LyXVC.cpp:206 src/LyXVC.cpp:212 src/LyXVC.cpp:225 src/LyXVC.cpp:231
+#: src/LyXVC.cpp:242
+msgid "(no log message)"
+msgstr "(Inga loggmelding)"
+
+#: src/LyXVC.cpp:246 src/frontends/qt/GuiView.cpp:3629
+msgid "LyX VC: Log Message"
+msgstr "LyX VK: Loggmelding"
+
+#: src/LyXVC.cpp:298
+#, c-format
+msgid ""
+"Reverting to the stored version of the document %1$s will lose all current "
+"changes.\n"
+"\n"
+"Do you want to revert to the older version?"
+msgstr ""
+"Dersom du går tilbake til det sist lagra versjon av dokumentet %1$s, vil "
+"alle endringane gå tapt\n"
+"\n"
+"Vil du gå tilbake til den siste lagra versjonen?"
+
+#: src/LyXVC.cpp:303
+msgid "Revert to stored version of document?"
+msgstr "Gå tilbake til den siste lagra versjonen av dokumentet?"
+
+#: src/LyXVC.cpp:304 src/frontends/qt/GuiView.cpp:4213
+msgid "&Revert"
+msgstr "&Gå tilbake til sist lagra"
+
+#: src/Paragraph.cpp:2060
+msgid "Senseless with this layout!"
+msgstr "Meiningslaust med denne stilen."
+
+#: src/Paragraph.cpp:2114
+msgid "Alignment not permitted"
+msgstr "Justeringa er ikkje lov"
+
+#: src/Paragraph.cpp:2115
+msgid ""
+"The new layout does not permit the alignment previously used.\n"
+"Setting to default."
+msgstr ""
+"Den nye stilen gir ikkje lov til justeringa som var i bruk.\n"
+"Brukar standard."
+
+#: src/Text.cpp:446
+msgid "Unknown Inset"
+msgstr "Ukjend innskot"
+
+#: src/Text.cpp:562 src/insets/InsetTabular.cpp:473
+#, fuzzy
+msgid "Change tracking author index missing"
+msgstr "Feil i spor endring"
+
+#: src/Text.cpp:563 src/insets/InsetTabular.cpp:474
+#, c-format
+msgid ""
+"A change tracking author information for index %1$d is missing. This can "
+"happen after a wrong merge by a version control system. In this case, either "
+"fix the merge, or have this information missing until the corresponding "
+"tracked changes are merged or this user edits the file again.\n"
+msgstr ""
+
+#: src/Text.cpp:579
+msgid "Unknown token"
+msgstr "Ukjent symbol"
+
+#: src/Text.cpp:964
+msgid ""
+"You cannot insert a space at the beginning of a paragraph. Please read the "
+"Tutorial."
+msgstr ""
+"Du kan ikkje sette inn eit mellomrom i starten av eit avsnitt. Ver så snill "
+"å lese innføring i LyX."
+
+#: src/Text.cpp:973
+msgid "You cannot type two spaces this way. Please read the Tutorial."
+msgstr ""
+"Du kan ikkje sette inn to mellomrom etter kvarandre. Ver så snill å lese "
+"innføring i LyX."
+
+#: src/Text.cpp:984
+msgid "Character is uncodable in this verbatim context."
+msgstr ""
+
+#: src/Text.cpp:1958
+msgid "[Change Tracking] "
+msgstr "[Spor endringar] "
+
+#: src/Text.cpp:1966
+#, c-format
+msgid "Changed by %1$s[[author]] on %2$s[[date]]. "
+msgstr ""
+
+#: src/Text.cpp:1976 src/mathed/InsetMathFont.cpp:237
+#: src/mathed/InsetMathFontOld.cpp:111
+#, c-format
+msgid "Font: %1$s"
+msgstr "Skrifttype:%1$s"
+
+#: src/Text.cpp:1981
+#, c-format
+msgid ", Depth: %1$d"
+msgstr " Djupn: %1$d"
+
+#: src/Text.cpp:1987
+msgid ", Spacing: "
+msgstr ", mellomrom: "
+
+#: src/Text.cpp:1993 src/frontends/qt/GuiDocument.cpp:872
+msgid "OneHalf"
+msgstr "Halvannan"
+
+#: src/Text.cpp:1999
+msgid "Other ("
+msgstr "Anna ("
+
+#: src/Text.cpp:2011
+msgid ", Paragraph: "
+msgstr ", Avsnitt: "
+
+#: src/Text.cpp:2012
+msgid ", Id: "
+msgstr " Id: "
+
+#: src/Text.cpp:2019
+msgid ", Char: 0x"
+msgstr ", Teikn: 0x"
+
+#: src/Text.cpp:2021
+msgid ", Boundary: "
+msgstr ", Grense: "
+
+#: src/Text2.cpp:418
+msgid "No font change defined."
+msgstr "Det er ikkje definert noko skrifttype endring."
+
+#: src/Text3.cpp:200
+msgid "Math editor mode"
+msgstr "Mattemodus"
+
+#: src/Text3.cpp:202
+msgid "No valid math formula"
+msgstr "Ingen valid matteformel"
+
+#: src/Text3.cpp:210 src/mathed/InsetMathNest.cpp:1034
+msgid "Already in regular expression mode"
+msgstr "Brukar regulære uttrykk frå før"
+
+#: src/Text3.cpp:223
+msgid "Regexp editor mode"
+msgstr "Regulære uttrykk modus"
+
+#: src/Text3.cpp:1575
+msgid "Layout "
+msgstr "Stil "
+
+#: src/Text3.cpp:1576 src/Text3.cpp:2139
+msgid " not known"
+msgstr " ukjent"
+
+#: src/Text3.cpp:2138
+#, fuzzy
+msgid "Table Style "
+msgstr "Tabellnotis"
+
+#: src/Text3.cpp:2332 src/frontends/qt/GuiApplication.cpp:1715
+msgid "Missing argument"
+msgstr "Manglande val"
+
+#: src/Text3.cpp:2494
+msgid "Invalid argument (number exceeds stack size)!"
+msgstr ""
+
+#: src/Text3.cpp:2498
+msgid "Invalid argument (must be a non-negative number)!"
+msgstr ""
+
+#: src/Text3.cpp:2503 src/Text3.cpp:2521
+#, c-format
+msgid "Text properties applied: %1$s"
+msgstr ""
+
+#: src/Text3.cpp:2673
+#, fuzzy
+msgid "Path to thesaurus directory not set!"
+msgstr "Set stigen til synonymordboka"
+
+#: src/Text3.cpp:2674
+msgid ""
+"The path to the thesaurus directory has not been specified.\n"
+"The thesaurus is not functional.\n"
+"Please refer to sec. 6.15.1 of the User's Guide for setup\n"
+"instructions."
+msgstr ""
+
+#: src/Text3.cpp:2741 src/Text3.cpp:2752
+msgid "Paragraph layout set"
+msgstr "set avsnitt stil"
+
+#: src/TextClass.cpp:127
+msgid "Plain Layout"
+msgstr "Utan stil"
+
+#: src/TextClass.cpp:918
+msgid "Missing File"
+msgstr "Fila manglar"
+
+#: src/TextClass.cpp:919
+msgid "Could not find stdinsets.inc! This may lead to data loss!"
+msgstr ""
+"Klarte ikkje å finne fila stdinsets.inc! Dette kan medføre tap av data!"
+
+#: src/TextClass.cpp:922
+msgid "Corrupt File"
+msgstr "Feil i fila"
+
+#: src/TextClass.cpp:923
+msgid "Could not read stdinsets.inc! This may lead to data loss!"
+msgstr "Klarte ikkje å lese fila stdinsets.inc! Dette kan medføre tap av data!"
+
+#: src/TextClass.cpp:1577
+#, fuzzy, c-format
+msgid "%1$s (Float)"
+msgstr "%1$s filer."
+
+#: src/TextClass.cpp:1582
+#, fuzzy, c-format
+msgid "Sub-%1$s (Float)"
+msgstr "Under-%1$s"
+
+#: src/TextClass.cpp:1877
+#, c-format
+msgid ""
+"The module %1$s has been requested by\n"
+"this document but has not been found in the list of\n"
+"available modules. If you recently installed it, you\n"
+"probably need to reconfigure LyX.\n"
+msgstr ""
+"Modulen %1$s som er brukt i dette dokumentet\n"
+"er ikkje i lista over tilgjengelege modular.\n"
+"Om du har akkurat installert modulen, kan\n"
+"det hende at LyX må setjast opp på nytt.\n"
+
+#: src/TextClass.cpp:1882
+msgid "Module not available"
+msgstr "Modulen er ikkje tilgjengeleg"
+
+#: src/TextClass.cpp:1888
+#, c-format
+msgid ""
+"The module %1$s requires a package that is not\n"
+"available in your LaTeX installation, or a converter that\n"
+"you have not installed. LaTeX output may not be possible.\n"
+"Missing prerequisites:\n"
+"\t%2$s\n"
+"See section 3.1.2.3 (Modules) of the User's Guide for more information."
+msgstr ""
+"Modulen %1$s treng ein pakke som ikkje\n"
+"er tilgjengeleg i LaTeX installasjonen din eller i eit støtteprogram som "
+"ikkje er installert .Det er ikkje\n"
+"sikkert at dokumentet blir mogeleg å produsere.\n"
+"Du manglar:\n"
+"\t%2$s\n"
+"Sjå seksjonen 3.1.2.3 (Moduler) i Brukerhandboka for meir informasjon."
+
+#: src/TextClass.cpp:1895 src/TextClass.cpp:1927
+msgid "Package not available"
+msgstr "LaTeX-pakken er ikkje tilgjengeleg"
+
+#: src/TextClass.cpp:1900
+#, c-format
+msgid "Error reading module %1$s\n"
+msgstr "Feil med å lese modulen %1$s\n"
+
+#: src/TextClass.cpp:1911
+#, fuzzy, c-format
+msgid ""
+"The cite engine %1$s has been requested by\n"
+"this document but has not been found in the list of\n"
+"available engines. If you recently installed it, you\n"
+"probably need to reconfigure LyX.\n"
+msgstr ""
+"Modulen %1$s som er brukt i dette dokumentet\n"
+"er ikkje i lista over tilgjengelege modular.\n"
+"Om du har akkurat installert modulen, kan\n"
+"det hende at LyX må setjast opp på nytt.\n"
+
+#: src/TextClass.cpp:1916
+#, fuzzy
+msgid "Cite Engine not available"
+msgstr "Skrifttype er ikkje tilgjengeleg"
+
+#: src/TextClass.cpp:1920
+#, fuzzy, c-format
+msgid ""
+"The cite engine %1$s requires a package that is not\n"
+"available in your LaTeX installation, or a converter that\n"
+"you have not installed. LaTeX output may not be possible.\n"
+"Missing prerequisites:\n"
+"\t%2$s\n"
+"See section 3.1.2.3 (Modules) of the User's Guide for more information."
+msgstr ""
+"Modulen %1$s treng ein pakke som ikkje\n"
+"er tilgjengeleg i LaTeX installasjonen din eller i eit støtteprogram som "
+"ikkje er installert .Det er ikkje\n"
+"sikkert at dokumentet blir mogeleg å produsere.\n"
+"Du manglar:\n"
+"\t%2$s\n"
+"Sjå seksjonen 3.1.2.3 (Moduler) i Brukerhandboka for meir informasjon."
+
+#: src/TextClass.cpp:1932
+#, fuzzy, c-format
+msgid "Error reading cite engine %1$s\n"
+msgstr "Feil med å lese modulen %1$s\n"
+
+#: src/TocBackend.cpp:267 src/insets/InsetIndex.cpp:468
+#: src/insets/InsetIndex.cpp:489
+msgid "unknown type!"
+msgstr "Ukjent type!"
+
+#: src/TocBackend.cpp:270
+#, fuzzy, c-format
+msgid "Index Entries (%1$s)"
+msgstr "Indeksnøkkel (%1$s)"
+
+#: src/TocBackend.cpp:286 src/insets/InsetTOC.cpp:75
+msgid "Table of Contents"
+msgstr "Innhaldsliste"
+
+#: src/TocBackend.cpp:287
+msgid "Changes"
+msgstr "Endringar"
+
+#: src/TocBackend.cpp:288
+#, fuzzy
+msgid "Senseless"
+msgstr "Meiningslaust!"
+
+#: src/TocBackend.cpp:289
+msgid "Citations"
+msgstr "Litteraturar"
+
+#: src/TocBackend.cpp:290
+msgid "Labels and References"
+msgstr "Etikettar og Referansar"
+
+#: src/TocBackend.cpp:291
+msgid "Broken References and Citations"
+msgstr ""
+
+#: src/TocBackend.cpp:293 src/frontends/qt/GuiDocument.cpp:1766
+msgid "Child Documents"
+msgstr "Barnedokument"
+
+#: src/TocBackend.cpp:294
+#, fuzzy
+msgid "Graphics[[listof]]"
+msgstr "Grafikk"
+
+#: src/TocBackend.cpp:295
+msgid "Equations"
+msgstr "Likningar"
+
+#: src/TocBackend.cpp:298
+msgid "Nomenclature Entries"
+msgstr "Nomenklaturnøklar"
+
+#: src/VCBackend.cpp:63 src/VCBackend.cpp:875 src/VCBackend.cpp:880
+#: src/VCBackend.cpp:929 src/VCBackend.cpp:988 src/VCBackend.cpp:1047
+#: src/VCBackend.cpp:1055 src/VCBackend.cpp:1356 src/VCBackend.cpp:1458
+#: src/VCBackend.cpp:1464 src/VCBackend.cpp:1487 src/VCBackend.cpp:1973
+#: src/frontends/qt/GuiView.cpp:3545 src/frontends/qt/GuiView.cpp:3588
+msgid "Revision control error."
+msgstr "Feil ved versjonkontrollen."
+
+#: src/VCBackend.cpp:64
+#, c-format
+msgid ""
+"Some problem occurred while running the command:\n"
+"'%1$s'."
+msgstr "Vi fekk ein feil når vi køyrde %1$s"
+
+#: src/VCBackend.cpp:636
+msgid "Up-to-date"
+msgstr "Oppdatert"
+
+#: src/VCBackend.cpp:638
+msgid "Locally Modified"
+msgstr "endra lokalt"
+
+#: src/VCBackend.cpp:640
+msgid "Locally Added"
+msgstr "Lagt til lokalt"
+
+#: src/VCBackend.cpp:642
+msgid "Needs Merge"
+msgstr "Treng å smelte saman"
+
+#: src/VCBackend.cpp:644
+msgid "Needs Checkout"
+msgstr "Treng å bli sjekka ut"
+
+#: src/VCBackend.cpp:646
+msgid "No CVS file"
+msgstr "Inga CVS-fil"
+
+#: src/VCBackend.cpp:648
+msgid "Cannot retrieve CVS status"
+msgstr "Kan ikkje hente CVS status"
+
+#: src/VCBackend.cpp:876
+msgid ""
+"The repository version is newer then the current check out.\n"
+"You have to update from repository first or revert your changes."
+msgstr ""
+"Versjonen i kjeldebrønnen er nyare enn den du har sjekka ut.\n"
+"Du må hente ut frå kjeldebrønnen først eller fjerne endringane dine."
+
+#: src/VCBackend.cpp:881
+#, c-format
+msgid ""
+"Bad status when checking in changes.\n"
+"\n"
+"'%1$s'\n"
+"\n"
+msgstr ""
+"Dårleg status når vi sjekka inn endringane\n"
+"\n"
+"'%1$s'\n"
+"\n"
+
+#: src/VCBackend.cpp:930 src/VCBackend.cpp:1488
+#, c-format
+msgid ""
+"Error when updating from repository.\n"
+"You have to manually resolve the conflicts NOW!\n"
+"'%1$s'.\n"
+"\n"
+"After pressing OK, LyX will try to reopen the resolved document."
+msgstr ""
+"Feil når vi oppdaterte frå kjeldebrønnen.\n"
+"Du må sjølv fikse problemet\n"
+"'%1$s'.\n"
+"Etter du trykkjer OK vil LyX opne dokumentet på nytt."
+
+#: src/VCBackend.cpp:964
+#, c-format
+msgid ""
+"There were detected changes in the working directory:\n"
+"%1$s\n"
+"\n"
+"Possible file conflicts must be then resolved manually or you will need to "
+"revert back to the repository version."
+msgstr ""
+"Det er oppdaga endringar i arbeidskatalogen\n"
+"%1$s\n"
+"\n"
+"Dersom det er filkonflikt må du ordne opp i det eller gå tilbake til "
+"versjonen i kjeldebrønnen."
+
+#: src/VCBackend.cpp:968 src/VCBackend.cpp:972 src/VCBackend.cpp:1529
+#: src/VCBackend.cpp:1533
+msgid "Changes detected"
+msgstr "Endringar oppdaga"
+
+#: src/VCBackend.cpp:969 src/VCBackend.cpp:973
+msgid "&Abort"
+msgstr "&Avbryt"
+
+#: src/VCBackend.cpp:969 src/VCBackend.cpp:1530
+msgid "View &Log ..."
+msgstr "Sjå &loggen..."
+
+#: src/VCBackend.cpp:989
+#, c-format
+msgid ""
+"Error when updating document %1$s from repository.\n"
+"You have to manually resolve the conflicts NOW!\n"
+"'%2$s'.\n"
+"\n"
+"After pressing OK, LyX will try to reopen the resolved document."
+msgstr ""
+"Feil når vi oppdaterte dokumentet %1$s frå kjeldebrønnen.\n"
+"Du må sjølv fikse problemet\n"
+"'%2$s'.\n"
+"Etter du trykkjer OK vil LyX opne dokumentet på nytt."
+
+#: src/VCBackend.cpp:1048
+#, c-format
+msgid ""
+"The document %1$s is not in repository.\n"
+"You have to check in the first revision before you can revert."
+msgstr ""
+"Dokumentet %1$s er ikkje i kjeldebrønnen.\n"
+"Du må sjekke inn før du kan gå tilbake til førre."
+
+#: src/VCBackend.cpp:1056
+#, c-format
+msgid ""
+"Cannot revert document %1$s to repository version.\n"
+"The status '%2$s' is unexpected."
+msgstr ""
+"Klarte ikkje gå tilbake til førre dokumentet %1$s i kjeldebrønn versjonen.\n"
+"Statusen '%2$s' er uventa."
+
+#: src/VCBackend.cpp:1341 src/VCBackend.cpp:1477 src/VCBackend.cpp:1514
+#: src/VCBackend.cpp:1568 src/VCBackend.cpp:1958
+msgid "Error: Could not generate logfile."
+msgstr "Feil! Kan ikkje lage logfila"
+
+#: src/VCBackend.cpp:1357 src/VCBackend.cpp:1974
+msgid ""
+"Error when committing to repository.\n"
+"You have to manually resolve the problem.\n"
+"LyX will reopen the document after you press OK."
+msgstr ""
+"Feil oppstod når vi prøvde å registrere endringane i kjeldebrønnen.\n"
+"Du må fikse problemet sjølv.\n"
+"LyX vil opne dokumentet på nytt når du trykkjer OK."
+
+#: src/VCBackend.cpp:1459
+msgid ""
+"Error while acquiring write lock.\n"
+"Another user is most probably editing\n"
+"the current document now!\n"
+"Also check the access to the repository."
+msgstr ""
+"Feil når vi prøvde å låse dokumentet.\n"
+"Truleg er det ein annan brukar dom\n"
+"endrar dokumentet no.\n"
+"Kan også vere mangel på rettar til kjeldebrønnen."
+
+#: src/VCBackend.cpp:1465
+msgid ""
+"Error while releasing write lock.\n"
+"Check the access to the repository."
+msgstr ""
+"Feil oppstod når vi prøvde å av-låse dokumentet.\n"
+"Kan vere mangel på rettar til kjeldebrønnen."
+
+#: src/VCBackend.cpp:1524
+#, c-format
+msgid ""
+"There were detected changes in the working directory:\n"
+"%1$s\n"
+"\n"
+"In case of file conflict version of the local directory files will be "
+"preferred.\n"
+"\n"
+"Continue?"
+msgstr ""
+"Det er oppdaga endringar i arbeidskatalogen\n"
+"%1$s\n"
+"\n"
+"Dersom det er forskjell i versjonane den lokale versjonen vil bli brukt.\n"
+"Skal vi halde fram?"
+
+#: src/VCBackend.cpp:1530 src/VCBackend.cpp:1534
+#: src/frontends/qt/FindAndReplace.cpp:388 src/frontends/qt/GuiPrefs.cpp:1864
+#: src/lyxfind.cpp:272 src/lyxfind.cpp:540 src/lyxfind.cpp:568
+msgid "&Yes"
+msgstr "&Ja"
+
+#: src/VCBackend.cpp:1530 src/VCBackend.cpp:1534
+#: src/frontends/qt/FindAndReplace.cpp:388 src/frontends/qt/GuiPrefs.cpp:1864
+#: src/lyxfind.cpp:272 src/lyxfind.cpp:540 src/lyxfind.cpp:568
+msgid "&No"
+msgstr "&Nei"
+
+#: src/VCBackend.cpp:1593
+msgid "SVN File Locking"
+msgstr "SVN låser fila"
+
+#: src/VCBackend.cpp:1594 src/VCBackend.cpp:1599
+msgid "Locking property unset."
+msgstr "Ikkje lengre låst."
+
+#: src/VCBackend.cpp:1594 src/VCBackend.cpp:1599
+msgid "Locking property set."
+msgstr "Låst"
+
+#: src/VCBackend.cpp:1595
+msgid "Do not forget to commit the locking property into the repository."
+msgstr "Ikkje gløym å sende låsinga til kjeldebrønnen."
+
+#: src/VSpace.cpp:190
+msgid "Default skip"
+msgstr "Standard avstand"
+
+#: src/VSpace.cpp:193
+msgid "Small skip"
+msgstr "Liten avstand"
+
+#: src/VSpace.cpp:196
+msgid "Medium skip"
+msgstr "Medium avstand"
+
+#: src/VSpace.cpp:199
+msgid "Big skip"
+msgstr "Stor avstand"
+
+#: src/VSpace.cpp:208
+msgid "Vertical fill"
+msgstr "Fyll loddrett"
+
+#: src/VSpace.cpp:215
+msgid "protected"
+msgstr "vern"
+
+#: src/buffer_funcs.cpp:75
+#, c-format
+msgid ""
+"The document %1$s is already loaded and has unsaved changes.\n"
+"Do you want to abandon your changes and reload the version on disk?"
+msgstr ""
+"Dokumentet %1$s er lasta frå før\n"
+"og har endringar du ikkje har lagra\n"
+"Vil du gå tilbake til den siste lagra versjonen og miste endringane?"
+
+#: src/buffer_funcs.cpp:77 src/frontends/qt/GuiView.cpp:4204
+msgid "Reload saved document?"
+msgstr "Gå tilbake til sist lagra?"
+
+#: src/buffer_funcs.cpp:78
+#, fuzzy
+msgid "Yes, &Reload"
+msgstr "&Last på nytt"
+
+#: src/buffer_funcs.cpp:78
+#, fuzzy
+msgid "No, &Keep Changes"
+msgstr "&Hald på endringane"
+
+#: src/buffer_funcs.cpp:100
+#, c-format
+msgid "The file %1$s exists but is not readable by the current user."
+msgstr "Fila %1$s eksisterer men du har ikkje rett til å lese den."
+
+#: src/buffer_funcs.cpp:103
+msgid "File not readable!"
+msgstr "Kan ikkje lese fila"
+
+#: src/buffer_funcs.cpp:125
+#, c-format
+msgid ""
+"The document %1$s does not yet exist.\n"
+"\n"
+"Do you want to create a new document?"
+msgstr ""
+"Dokumentet %1$s finst ikkje.\n"
+"\n"
+"Vil du laga eit nytt dokument?"
+
+#: src/buffer_funcs.cpp:128
+msgid "Create new document?"
+msgstr "Vil du lagre eit nytt dokument?"
+
+#: src/buffer_funcs.cpp:129
+#, fuzzy
+msgid "&Yes, Create New Document"
+msgstr "Vil du lagre eit nytt dokument?"
+
+#: src/buffer_funcs.cpp:129
+msgid "&No, Do Not Create"
+msgstr ""
+
+#: src/buffer_funcs.cpp:157
+#, c-format
+msgid ""
+"The specified document template\n"
+"%1$s\n"
+"could not be read."
+msgstr ""
+"Dokumentmalen\n"
+"%1$s\n"
+"kunne ikkje bli lest."
+
+#: src/buffer_funcs.cpp:159
+msgid "Could not read template"
+msgstr "Kan ikkje lese malen"
+
+#: src/frontends/qt/BulletsModule.cpp:44
+msgid "Standard[[Bullets]]"
+msgstr "Standard"
+
+#: src/frontends/qt/BulletsModule.cpp:46
+msgid "Dings 1"
+msgstr "Dings 1"
+
+#: src/frontends/qt/BulletsModule.cpp:47
+msgid "Dings 2"
+msgstr "Dings 2"
+
+#: src/frontends/qt/BulletsModule.cpp:48
+msgid "Dings 3"
+msgstr "Dings 3"
+
+#: src/frontends/qt/BulletsModule.cpp:49
+msgid "Dings 4"
+msgstr "Dings 4"
+
+#: src/frontends/qt/ButtonController.cpp:226
+#: src/frontends/qt/GuiApplication.cpp:1815 src/frontends/qt/GuiCompare.cpp:193
+#: src/frontends/qt/GuiSymbols.cpp:346
+msgid "Cancel"
+msgstr "Avbryt"
+
+#: src/frontends/qt/ButtonController.cpp:228
+#: src/frontends/qt/GuiCompare.cpp:191 src/frontends/qt/GuiDelimiter.cpp:363
+#: src/frontends/qt/GuiSymbols.cpp:348
+msgid "Close"
+msgstr "Lat att"
+
+#: src/frontends/qt/CategorizedCombo.cpp:189
+msgid "Unavailable:"
+msgstr "Utilgjengeleg:"
+
+#: src/frontends/qt/CategorizedCombo.cpp:469
+#, c-format
+msgid "Unavailable: %1$s"
+msgstr "Utilgjengeleg %1$s"
+
+#: src/frontends/qt/CategorizedCombo.cpp:472
+#: src/frontends/qt/CategorizedCombo.cpp:497
+#: src/frontends/qt/CategorizedCombo.cpp:498
+msgid "Uncategorized"
+msgstr "Utan kategoriar"
+
+#: src/frontends/qt/FileDialog.cpp:188
+msgid "Directories"
+msgstr "Katalogar"
+
+#: src/frontends/qt/FindAndReplace.cpp:284
+msgid "File"
+msgstr "Fil"
+
+#: src/frontends/qt/FindAndReplace.cpp:287
+msgid "Master document"
+msgstr "Hovuddokumentet"
+
+#: src/frontends/qt/FindAndReplace.cpp:290
+msgid "Open files"
+msgstr "Opna filer"
+
+#: src/frontends/qt/FindAndReplace.cpp:293
+msgid "Manuals"
+msgstr "Manualane"
+
+#: src/frontends/qt/FindAndReplace.cpp:297
+#, c-format
+msgid ""
+"%1$s: the end was reached while searching forward.\n"
+"Continue searching from the beginning?"
+msgstr ""
+"%1$s: slutten vart nådd medan vi leita framover.\n"
+"skal vi fortsette frå byrjinga?"
+
+#: src/frontends/qt/FindAndReplace.cpp:300
+#, c-format
+msgid ""
+"%1$s: the beginning was reached while searching backward.\n"
+"Continue searching from the end?"
+msgstr ""
+"%1$s: Starten vart nådd medan vi leita bakover.\n"
+"skal vi fortsette frå slutten?"
+
+#: src/frontends/qt/FindAndReplace.cpp:323
+msgid "Advanced search in progress (press ESC to cancel) . . ."
+msgstr "Utvida søk køyrer (trykk ESC for å avbryte)..."
+
+#: src/frontends/qt/FindAndReplace.cpp:369
+msgid "Advanced search cancelled by user"
+msgstr "Utvida søk avbroten av brukaren"
+
+#: src/frontends/qt/FindAndReplace.cpp:387 src/lyxfind.cpp:271
+#: src/lyxfind.cpp:539 src/lyxfind.cpp:567
+msgid "Wrap search?"
+msgstr "Leita rundt?"
+
+#: src/frontends/qt/FindAndReplace.cpp:438
+msgid "Nothing to search"
+msgstr "Har ingenting å leite etter"
+
+#: src/frontends/qt/FindAndReplace.cpp:486
+msgid "No open document(s) in which to search"
+msgstr "Ingen opne dokument å leite i"
+
+#: src/frontends/qt/FindAndReplace.cpp:588
+msgid "Advanced Find and Replace"
+msgstr "Utvida søk og erstatte"
+
+#: src/frontends/qt/FloatPlacement.cpp:182
+#: src/frontends/qt/GuiDocument.cpp:1142 src/frontends/qt/GuiDocument.cpp:2659
+#: src/frontends/qt/GuiDocument.cpp:2686
+msgid "Class Default"
+msgstr "Dokumentklassestandard"
+
+#: src/frontends/qt/FloatPlacement.cpp:184
+#, fuzzy
+msgid "Document Default"
+msgstr "Lagra desse vala som standardval"
+
+#: src/frontends/qt/FloatPlacement.h:38 src/frontends/qt/GuiDocument.cpp:1781
+#, fuzzy
+msgid "Float Settings"
+msgstr "Flytarval...|F"
+
+#: src/frontends/qt/GuiAbout.cpp:53
+#, fuzzy
+msgid "ERROR: LyX wasn't able to find the CREDITS file\n"
+msgstr "Ein feil oppstod ved lesinga av fila med krediteringane\n"
+
+#: src/frontends/qt/GuiAbout.cpp:54 src/frontends/qt/GuiAbout.cpp:59
+#, fuzzy
+msgid ""
+"Please install correctly to estimate the great\n"
+"amount of work other people have done for the LyX project."
+msgstr "alt arbeidet folk har gjort for LyX-prosjektet."
+
+#: src/frontends/qt/GuiAbout.cpp:58
+#, fuzzy
+msgid "ERROR: LyX wasn't able to read the CREDITS file\n"
+msgstr "Ein feil oppstod ved lesinga av fila med krediteringane\n"
+
+#: src/frontends/qt/GuiAbout.cpp:95
+#, fuzzy
+msgid "ERROR: LyX wasn't able to find the RELEASE-NOTES file\n"
+msgstr "Ein feil oppstod ved lesinga av fila med krediteringane\n"
+
+#: src/frontends/qt/GuiAbout.cpp:96 src/frontends/qt/GuiAbout.cpp:101
+#, fuzzy
+msgid ""
+"Please install correctly to see what has changed\n"
+"for this version of LyX."
+msgstr "Instaler korrekt for å kunne verdsette\n"
+
+#: src/frontends/qt/GuiAbout.cpp:100
+#, fuzzy
+msgid "ERROR: LyX wasn't able to read the RELEASE-NOTES file\n"
+msgstr "Ein feil oppstod ved lesinga av fila med krediteringane\n"
+
+#: src/frontends/qt/GuiAbout.cpp:183
+#, c-format
+msgid ""
+"LyX is Copyright (C) 1995 by Matthias Ettrich,\n"
+"1995--%1$s LyX Team"
+msgstr ""
+"LyX har Kopirett (C) 1995 av Matthias Ettrich,\n"
+"1995--%1$s LyX Teamet"
+
+#: src/frontends/qt/GuiAbout.cpp:191
+msgid ""
+"This program is free software; you can redistribute it and/or modify it "
+"under the terms of the GNU General Public License as published by the Free "
+"Software Foundation; either version 2 of the License, or (at your option) "
+"any later version."
+msgstr ""
+"Dette programet er fri-programvare. Du kan vidareformidle det og/eller endre "
+"det etter dei rettane som er gitt deg i GNU General Public Licence som er "
+"publisert av Free Software Foundation; enten versjon 2 eller seinare "
+"versjonar om du ynskjer det."
+
+#: src/frontends/qt/GuiAbout.cpp:197
+msgid ""
+"LyX is distributed in the hope that it will be useful, but WITHOUT ANY "
+"WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS "
+"FOR A PARTICULAR PURPOSE.\n"
+"See the GNU General Public License for more details.\n"
+"You should have received a copy of the GNU General Public License along with "
+"this program; if not, write to the Free Software Foundation, Inc., 51 "
+"Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA."
+msgstr ""
+"LyX er formidla i den vona at det er nyttig for deg men utan nokon "
+"garantiar. Sjå ellers dei avgrensingane som er gitt under:\n"
+"LyX is distributed in the hope that it will be useful, but WITHOUT ANY "
+"WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS "
+"FOR A PARTICULAR PURPOSE.\n"
+"See the GNU General Public License for more details.\n"
+"You should have received a copy of the GNU General Public License along with "
+"this program; if not, write to the Free Software Foundation, Inc., 675 Mass "
+"Ave, Cambridge, MA 02139, USA."
+
+#: src/frontends/qt/GuiAbout.cpp:252
+msgid "not released yet"
+msgstr "Ikkje gitt ut enno"
+
+#: src/frontends/qt/GuiAbout.cpp:257
+#, fuzzy, c-format
+msgid ""
+"Version %1$s\n"
+"(%2$s)"
+msgstr ""
+"LyX Versjon %1$s\n"
+"(%2$s)"
+
+#: src/frontends/qt/GuiAbout.cpp:265
+msgid "Built from git commit hash "
+msgstr ""
+
+#: src/frontends/qt/GuiAbout.cpp:278
+#, c-format
+msgid "Qt Version (run-time): %1$s"
+msgstr "Qt Versjon (køyre-tid): %1$s"
+
+#: src/frontends/qt/GuiAbout.cpp:283
+#, c-format
+msgid "Qt Version (compile-time): %1$s"
+msgstr "Qt Versjon (kompileringstidspunkt): %1$s"
+
+#: src/frontends/qt/GuiAbout.cpp:314
+msgid "About LyX"
+msgstr "Om LyX"
+
+#: src/frontends/qt/GuiApplication.cpp:650
+msgid "About %1"
+msgstr "Om %1"
+
+#: src/frontends/qt/GuiApplication.cpp:651 src/frontends/qt/GuiPrefs.cpp:3454
+msgid "Preferences"
+msgstr "LyX-Val"
+
+#: src/frontends/qt/GuiApplication.cpp:652
+msgid "Reconfigure"
+msgstr "Set opp på nytt"
+
+#: src/frontends/qt/GuiApplication.cpp:653
+#, fuzzy
+msgid "Restore Defaults"
+msgstr "&Bruk standardar"
+
+#: src/frontends/qt/GuiApplication.cpp:654
+msgid "Quit %1"
+msgstr "Skru av %1"
+
+#: src/frontends/qt/GuiApplication.cpp:655
+msgid "&OK"
+msgstr "&OK"
+
+#: src/frontends/qt/GuiApplication.cpp:657
+#, fuzzy
+msgid "Apply"
+msgstr "&Bruk"
+
+#: src/frontends/qt/GuiApplication.cpp:658
+msgid "Reset"
+msgstr "Nullstill"
+
+#: src/frontends/qt/GuiApplication.cpp:659
+#, fuzzy
+msgid "Open"
+msgstr "Opning"
+
+#: src/frontends/qt/GuiApplication.cpp:1127
+msgid "Nothing to do"
+msgstr "Har ingenting å gjere"
+
+#: src/frontends/qt/GuiApplication.cpp:1133
+msgid "Unknown action"
+msgstr "Ukjend handling"
+
+#: src/frontends/qt/GuiApplication.cpp:1177
+msgid "Command not handled"
+msgstr "Den kommandoen er ikkje handtert"
+
+#: src/frontends/qt/GuiApplication.cpp:1183
+msgid "Command disabled"
+msgstr "Den kommandoen er stengt"
+
+#: src/frontends/qt/GuiApplication.cpp:1312 src/frontends/qt/GuiView.cpp:2019
+msgid "Command not allowed without a buffer open"
+msgstr "Kan ikkje gjera den kommandoen utan eit ope buffer"
+
+#: src/frontends/qt/GuiApplication.cpp:1319
+msgid "the <LFUN-COMMAND> argument of buffer-forall is not valid"
+msgstr "<LFUN-COMMAND> argumentet for buffer-forall er ikkje gyldig"
+
+#: src/frontends/qt/GuiApplication.cpp:1396
+msgid "Wrong focus!"
+msgstr ""
+
+#: src/frontends/qt/GuiApplication.cpp:1527
+msgid "Running configure..."
+msgstr "Køyrer \"stiller inn\"..."
+
+#: src/frontends/qt/GuiApplication.cpp:1535
+msgid "Reloading configuration..."
+msgstr "Les innstillingane om igjen..."
+
+#: src/frontends/qt/GuiApplication.cpp:1542
+msgid "System reconfiguration failed"
+msgstr "Systemet kunne ikkje bli sett opp på nytt"
+
+#: src/frontends/qt/GuiApplication.cpp:1543
+msgid ""
+"The system reconfiguration has failed.\n"
+"Default textclass is used but LyX may\n"
+"not be able to work properly.\n"
+"Please reconfigure again if needed."
+msgstr ""
+"Systemet vart ikkje sett opp på nytt.\n"
+"Vi bruker standard tekstklasse,\n"
+"men det er ikkje sikkert at LyX vil fungere.\n"
+"Prøv å sette opp på nytt om det er nødvendig."
+
+#: src/frontends/qt/GuiApplication.cpp:1548
+msgid "System reconfigured"
+msgstr "Systemet har blitt sett opp på nytt"
+
+#: src/frontends/qt/GuiApplication.cpp:1549
+msgid ""
+"The system has been reconfigured.\n"
+"You need to restart LyX to make use of any\n"
+"updated document class specifications."
+msgstr ""
+"Systemet har blitt sett opp på nytt.\n"
+"Du må starte LyX på nytt for å\n"
+"kunne nytte endringane."
+
+#: src/frontends/qt/GuiApplication.cpp:1629
+msgid "Exiting."
+msgstr "Avsluttar."
+
+#: src/frontends/qt/GuiApplication.cpp:1727
+#, c-format
+msgid "Opening help file %1$s..."
+msgstr "Opnar hjelpfila %1$s..."
+
+#: src/frontends/qt/GuiApplication.cpp:1741
+msgid "Syntax: set-color <lyx_name> <x11_name>"
+msgstr "Syntaks: set-color <lyx_name> <x11_name>"
+
+#: src/frontends/qt/GuiApplication.cpp:1757
+#, c-format
+msgid "Set-color \"%1$s\" failed - color is undefined or may not be redefined"
+msgstr ""
+"Kan ikkje sette fargen \"%1$s\", den finst ikkje eller kan ikkje bli endra"
+
+#: src/frontends/qt/GuiApplication.cpp:1862
+#, fuzzy, c-format
+msgid "Cannot iterate more than %1$d times"
+msgstr "Klarte ikkje å fjerna standard indeksen."
+
+#: src/frontends/qt/GuiApplication.cpp:1962
+#, c-format
+msgid "Applied \"%1$s\" to %2$d buffer(s)"
+msgstr "Gjorde \"%1$s\" med %2$d buffer"
+
+#: src/frontends/qt/GuiApplication.cpp:2049
+#, c-format
+msgid "Document defaults saved in %1$s"
+msgstr "Standardval for dokument er lagra i %1$s"
+
+#: src/frontends/qt/GuiApplication.cpp:2053
+msgid "Unable to save document defaults"
+msgstr "Klarte ikkje å lagre standardval for dokument"
+
+#: src/frontends/qt/GuiApplication.cpp:2277
+#: src/frontends/qt/GuiApplication.cpp:2292
+msgid "Unknown function."
+msgstr "Ukjent funksjon."
+
+#: src/frontends/qt/GuiApplication.cpp:2793
+msgid "The current document was closed."
+msgstr "Dette dokument vart lukka."
+
+#: src/frontends/qt/GuiApplication.cpp:2803
+msgid ""
+"LyX has caught an exception, it will now attempt to save all unsaved "
+"documents and exit.\n"
+"\n"
+"Exception: "
+msgstr ""
+"LyX har oppdaga eit unntak, og vil no prøve å lagre alle dokumenta og "
+"avslutte.\n"
+"\n"
+"Unntaket: "
+
+#: src/frontends/qt/GuiApplication.cpp:2807
+#: src/frontends/qt/GuiApplication.cpp:2813
+msgid "Software exception Detected"
+msgstr "Mjukvare unntak oppdaga"
+
+#: src/frontends/qt/GuiApplication.cpp:2811
+msgid ""
+"LyX has caught some really weird exception, it will now attempt to save all "
+"unsaved documents and exit."
+msgstr ""
+"LyX har oppdaga eit merkeleg unntak og vil no prøve å lagre dokumenta dine "
+"og avslutte."
+
+#: src/frontends/qt/GuiApplication.cpp:3112
+#: src/frontends/qt/GuiApplication.cpp:3124
+msgid "Could not find UI definition file"
+msgstr "Kan ikkje lese fila med brukerinnstillingar"
+
+#: src/frontends/qt/GuiApplication.cpp:3113
+#, c-format
+msgid ""
+"Error while reading the included file\n"
+"%1$s\n"
+"Please check your installation."
+msgstr ""
+"Klarte ikkje å lese den inkluderte fila\n"
+"%1$s.\n"
+"Sjekk installasjonen din."
+
+#: src/frontends/qt/GuiApplication.cpp:3119
+msgid "Could not find default UI file"
+msgstr "Kunne ikkje finne fila med brukarinnstillingar"
+
+#: src/frontends/qt/GuiApplication.cpp:3120
+msgid ""
+"LyX could not find the default UI file!\n"
+"Please check your installation."
+msgstr ""
+"Klarte ikkje finne fila med brukerinnstillingar.\n"
+"%1$s.\n"
+"Sjekk installasjonen din."
+
+#: src/frontends/qt/GuiApplication.cpp:3125
+#, c-format
+msgid ""
+"Error while reading the configuration file\n"
+"%1$s\n"
+"Falling back to default.\n"
+"Please look under Tools>Preferences>User Interface and\n"
+"check which User Interface file you are using."
+msgstr ""
+"Klarte ikkje lese fila med innstillingar.\n"
+"%1$s.\n"
+"Går tilbake til standarden.\n"
+"Ver venleg og sjå i Verkty->LyX-Val->Grensesnitt og\n"
+"sjekk kvafor brukargrensesnitt som er i bruk."
+
+#: src/frontends/qt/GuiBibitem.cpp:60
+#, fuzzy
+msgid "Author &Names:"
+msgstr "Forfattarfotnotis:"
+
+#: src/frontends/qt/GuiBibitem.cpp:62
+msgid ""
+"Insert the author name(s) for the author-year reference here. If you use an "
+"abbreviated list (with `et al.'), the full list can go below."
+msgstr ""
+
+#: src/frontends/qt/GuiBibitem.cpp:66
+msgid ""
+"Pass content of the `Author', `Year' and `All Authors' fields literally to "
+"LaTeX. Check this if you want to enter LaTeX code."
+msgstr ""
+
+#: src/frontends/qt/GuiBibitem.h:36
+#, fuzzy
+msgid "Bibliography Item Settings"
+msgstr "Litteraturoverskrift"
+
+#: src/frontends/qt/GuiBibtex.cpp:56 src/frontends/qt/GuiBibtex.cpp:346
+msgid "BibTeX Bibliography"
+msgstr "BibTeX litteraturliste"
+
+#: src/frontends/qt/GuiBibtex.cpp:68 src/frontends/qt/GuiCitation.cpp:104
+#: src/frontends/qt/GuiDocument.cpp:1664 src/frontends/qt/GuiLyXFiles.cpp:194
+#: src/frontends/qt/GuiRef.cpp:60 src/frontends/qt/PanelStack.cpp:77
+msgid "Clear text"
+msgstr "Fjern teksten"
+
+#: src/frontends/qt/GuiBibtex.cpp:70
+#, fuzzy
+msgid "All avail. databases"
+msgstr "&Tilgjengeleg litteratur:"
+
+#: src/frontends/qt/GuiBibtex.cpp:118
+msgid ""
+"This list consists of all databases that are indexed by LaTeX and thus are "
+"found without a file path. This is usually everything in the bib/ "
+"subdirectory of LaTeX's texmf tree. If you want to reuse your own database, "
+"this is the place you should store it."
+msgstr ""
+
+#: src/frontends/qt/GuiBibtex.cpp:138 src/frontends/qt/GuiBibtex.cpp:305
+#, fuzzy
+msgid "Document Encoding"
+msgstr "Dokument handtering"
+
+#: src/frontends/qt/GuiBibtex.cpp:276
+#, fuzzy
+msgid "Database"
+msgstr "Databasar:"
+
+#: src/frontends/qt/GuiBibtex.cpp:277
+#, fuzzy
+msgid "File Encoding"
+msgstr "Handsaming av filer"
+
+#: src/frontends/qt/GuiBibtex.cpp:284
+#, fuzzy
+msgid "General E&ncoding:"
+msgstr "Generell teiknsetjing"
+
+#: src/frontends/qt/GuiBibtex.cpp:285
+msgid ""
+"If your bibliography databases use a different encoding than the LyX "
+"document, specify it here. If indivivual databases have different encodings, "
+"you can set it in the list above."
+msgstr ""
+
+#: src/frontends/qt/GuiBibtex.cpp:304
+#, fuzzy
+msgid "General Encoding"
+msgstr "Generell teiknsetjing"
+
+#: src/frontends/qt/GuiBibtex.cpp:311
+msgid ""
+"If this bibliography database uses a different encoding than specified "
+"below, set it here"
+msgstr ""
+
+#: src/frontends/qt/GuiBibtex.cpp:344
+#, fuzzy
+msgid "Biblatex Bibliography"
+msgstr "BibTeX litteraturliste"
+
+#: src/frontends/qt/GuiBibtex.cpp:362 src/insets/InsetBibtex.cpp:233
+#, fuzzy
+msgid "all reference units"
+msgstr "Tilgjengeleg litteratur"
+
+#: src/frontends/qt/GuiBibtex.cpp:458 src/frontends/qt/GuiBibtex.cpp:468
+#: src/frontends/qt/GuiCompare.cpp:163 src/frontends/qt/GuiCompare.cpp:167
+#: src/frontends/qt/GuiDocument.cpp:2837 src/frontends/qt/GuiExternal.cpp:677
+#: src/frontends/qt/GuiGraphics.cpp:791 src/frontends/qt/GuiInclude.cpp:330
+#: src/frontends/qt/GuiLyXFiles.cpp:368 src/frontends/qt/GuiLyXFiles.cpp:374
+#: src/frontends/qt/GuiView.cpp:2392 src/frontends/qt/GuiView.cpp:2451
+#: src/frontends/qt/GuiView.cpp:2589 src/frontends/qt/GuiView.cpp:2723
+#: src/frontends/qt/GuiView.cpp:2842 src/frontends/qt/GuiView.cpp:2964
+#, fuzzy
+msgid "D&ocuments"
+msgstr "Dokument"
+
+#: src/frontends/qt/GuiBibtex.cpp:460
+msgid "BibTeX Databases (*.bib)"
+msgstr "BibTeX Databasar (*.bib)"
+
+#: src/frontends/qt/GuiBibtex.cpp:462
+msgid "Select a BibTeX database to add"
+msgstr "Vel ein BibTeX database"
+
+#: src/frontends/qt/GuiBibtex.cpp:470
+msgid "BibTeX Styles (*.bst)"
+msgstr "BibTeX stilfiler (*.bst)"
+
+#: src/frontends/qt/GuiBibtex.cpp:472
+msgid "Select a BibTeX style"
+msgstr "Vel BibTeX stil"
+
+#: src/frontends/qt/GuiBox.cpp:58
+msgid "No frame"
+msgstr "Inga ramme"
+
+#: src/frontends/qt/GuiBox.cpp:58
+msgid "Simple rectangular frame"
+msgstr "Enkel rektangel ramme"
+
+#: src/frontends/qt/GuiBox.cpp:59
+msgid "Oval frame, thin"
+msgstr "Tynn, oval ramme"
+
+#: src/frontends/qt/GuiBox.cpp:59
+msgid "Oval frame, thick"
+msgstr "Tjukk oval ramme"
+
+#: src/frontends/qt/GuiBox.cpp:60
+msgid "Drop shadow"
+msgstr "Kastar skugge"
+
+#: src/frontends/qt/GuiBox.cpp:60
+msgid "Shaded background"
+msgstr "Skuggelagd bakgrunn"
+
+#: src/frontends/qt/GuiBox.cpp:61
+msgid "Double rectangular frame"
+msgstr "dobbel rektangel ramme"
+
+#: src/frontends/qt/GuiBox.cpp:74
+msgid "Depth"
+msgstr "Djupn"
+
+#: src/frontends/qt/GuiBox.cpp:75
+msgid "Total Height"
+msgstr "Heile høgda"
+
+#: src/frontends/qt/GuiBox.cpp:428 src/frontends/qt/GuiBox.cpp:636
+#: src/insets/InsetBox.cpp:141
+msgid "Makebox"
+msgstr "Lag ramme"
+
+#: src/frontends/qt/GuiBox.h:44
+#, fuzzy
+msgid "Box Settings"
+msgstr "Rammeval...|R"
+
+#: src/frontends/qt/GuiBranch.h:35
+#, fuzzy
+msgid "Branch Settings"
+msgstr "Greinval|G"
+
+#: src/frontends/qt/GuiBranches.cpp:53 src/insets/Inset.cpp:114
+msgid "Branch"
+msgstr "Grein"
+
+#: src/frontends/qt/GuiBranches.cpp:54
+msgid "Activated"
+msgstr "Aktivert"
+
+#: src/frontends/qt/GuiBranches.cpp:56
+msgid "Filename Suffix"
+msgstr "Filetternamn"
+
+#: src/frontends/qt/GuiBranches.cpp:135 src/frontends/qt/GuiBranches.cpp:143
+#: src/frontends/qt/GuiDocument.cpp:3276 src/frontends/qt/GuiDocument.cpp:4568
+#: src/frontends/qt/GuiProgressView.cpp:144
+#: src/frontends/qt/GuiProgressView.cpp:158
+#: src/frontends/qt/GuiProgressView.cpp:179
+msgid "Yes"
+msgstr "Ja"
projects / lyx.git / blobdiff