+"フォント「%2$s」に必要なLaTeXパッケージ「%1$s」が\n"
+"システムにありません。LyXは、既定フォントに回帰します。"
+
+#: src/LyX.cpp:121
+msgid "Could not read configuration file"
+msgstr "設定ファイルを読み込むことができませんでした"
+
+#: src/LyX.cpp:122
+#, c-format
+msgid ""
+"Error while reading the configuration file\n"
+"%1$s.\n"
+"Please check your installation."
+msgstr ""
+"設定ファイル %1$s\n"
+"を読む際にエラーが発生しました。\n"
+"インストールが正しかったかチェックしてください。"
+
+#: src/LyX.cpp:131
+msgid "LyX: reconfiguring user directory"
+msgstr "LyX: ユーザーディレクトリを再初期化しています。"
+
+#: src/LyX.cpp:135
+msgid "Done!"
+msgstr "終わりました!"
+
+#: src/LyX.cpp:379
+msgid "The following files could not be loaded:"
+msgstr "以下のファイルを読み込むことができませんでした:"
+
+#: src/LyX.cpp:416
+#, c-format
+msgid "%1$s does not appear like a LyX created temporary directory."
+msgstr "%1$sはLyXが生成した作業ディレクトリではないようです。"
+
+#: src/LyX.cpp:418
+msgid "Cannot remove temporary directory"
+msgstr "作業ディレクトリを削除することができません"
+
+#: src/LyX.cpp:424
+#, c-format
+msgid "Unable to remove the temporary directory %1$s"
+msgstr "作業ディレクトリ%1$sを削除することができませんでした"
+
+#: src/LyX.cpp:426
+msgid "Unable to remove temporary directory"
+msgstr "作業用ディレクトリを削除することができませんでした"
+
+#: src/LyX.cpp:454
+#, c-format
+msgid "Wrong command line option `%1$s'. Exiting."
+msgstr "コマンドラインオプション`%1$s'は誤りです。終了します。"
+
+#: src/LyX.cpp:472
+msgid "Missing filename for this operation."
+msgstr "この操作に必要なファイル名がありません"
+
+#: src/LyX.cpp:511
+#, c-format
+msgid "LyX failed to load the following file: %1$s"
+msgstr "LyXは以下のファイルを読み込むのに失敗しました: %1$s"
+
+#: src/LyX.cpp:537
+msgid "No textclass is found"
+msgstr "テキストクラスが見つかりません。"
+
+#: src/LyX.cpp:538
+msgid ""
+"LyX will only have minimal functionality because no textclasses have been "
+"found. You can either try to reconfigure LyX normally, try to reconfigure "
+"without checking your LaTeX installation, or continue."
+msgstr ""
+"テキストクラスが見当たらないため、LyXは最小限の機能しか提供できません。 その"
+"まま環境構成を行うか、 LaTeX装備を確認せずに環境構成を行うか、 あるいは継続す"
+"るかしてください。"
+
+#: src/LyX.cpp:542
+msgid "&Reconfigure"
+msgstr "環境構成(&R)"
+
+#: src/LyX.cpp:543
+msgid "&Without LaTeX"
+msgstr "LaTeXを使用しない(&W)"
+
+#: src/LyX.cpp:544 src/VCBackend.cpp:958 src/VCBackend.cpp:962
+msgid "&Continue"
+msgstr "続ける(&C)"
+
+#: src/LyX.cpp:647
+msgid ""
+"SIGHUP signal caught!\n"
+"Bye."
+msgstr ""
+"SIGHUPシグナルが検知されました!\n"
+"さようなら。"
+
+#: src/LyX.cpp:651
+msgid ""
+"SIGFPE signal caught!\n"
+"Bye."
+msgstr ""
+"SIGFPEシグナルが検知されました!\n"
+"さようなら。"
+
+#: src/LyX.cpp:654
+msgid ""
+"SIGSEGV signal caught!\n"
+"Sorry, you have found a bug in LyX, hope you have not lost any data.\n"
+"Please read the bug-reporting instructions in 'Help->Introduction' and send "
+"us a bug report, if necessary. Thanks!\n"
+"Bye."
+msgstr ""
+"SIGSEGVシグナルが検知されました!\n"
+"申し訳ありませんが、LyXのバグに遭遇したようです。データ損失のなかったことをお"
+"祈り申し上げます。\n"
+"必要ならば、「ヘルプ→はじめの一歩」のバグレポートの仕方を読んで、バグレポート"
+"をお送り下さい。ご協力感謝します。\n"
+"それでは。"
+
+#: src/LyX.cpp:670
+msgid "LyX crashed!"
+msgstr "LyXがクラッシュしました!"
+
+#: src/LyX.cpp:704 src/frontends/qt4/GuiView.cpp:1036
+msgid "LyX: "
+msgstr "LyX: "
+
+#: src/LyX.cpp:858
+msgid "Could not create temporary directory"
+msgstr "作業ディレクトリを作成することができませんでした"
+
+#: src/LyX.cpp:859
+#, c-format
+msgid ""
+"Could not create a temporary directory in\n"
+"\"%1$s\"\n"
+"Make sure that this path exists and is writable and try again."
+msgstr ""
+"作業ディレクトリを「%1$s」に作成することができ\n"
+"ませんでした。このパスが存在し書き込み可能\n"
+"であることを確認して,再度実行してください。"
+
+#: src/LyX.cpp:942
+msgid "Missing user LyX directory"
+msgstr "個人用 LyX ディレクトリがありません"
+
+#: src/LyX.cpp:943
+#, c-format
+msgid ""
+"You have specified a non-existent user LyX directory, %1$s.\n"
+"It is needed to keep your own configuration."
+msgstr ""
+"実在しない個人用 LyX ディレクトリ「%1$s」を指定しました。\n"
+"このディレクトリは自分用の設定を保存しておくのに必要です。"
+
+#: src/LyX.cpp:948
+msgid "&Create directory"
+msgstr "ディレクトリを作成(&C)"
+
+#: src/LyX.cpp:949
+msgid "&Exit LyX"
+msgstr "LyXを終了(&E)"
+
+#: src/LyX.cpp:950
+msgid "No user LyX directory. Exiting."
+msgstr "個人用 LyX ディレクトリがありません。終了します。"
+
+#: src/LyX.cpp:954
+#, c-format
+msgid "LyX: Creating directory %1$s"
+msgstr "LyX: ディレクトリ「%1$s」を作成しています"
+
+#: src/LyX.cpp:959
+msgid "Failed to create directory. Exiting."
+msgstr "ディレクトリを作成するのに失敗しました。終了します。"
+
+#: src/LyX.cpp:1032
+msgid "List of supported debug flags:"
+msgstr "サポートされているデバッグフラグの一覧:"
+
+#: src/LyX.cpp:1036
+#, c-format
+msgid "Setting debug level to %1$s"
+msgstr "デバッグレベルを%1$sに設定します"
+
+#: src/LyX.cpp:1047
+msgid ""
+"Usage: lyx [ command line switches ] [ name.lyx ... ]\n"
+"Command line switches (case sensitive):\n"
+"\t-help summarize LyX usage\n"
+"\t-userdir dir set user directory to dir\n"
+"\t-sysdir dir set system directory to dir\n"
+"\t-geometry WxH+X+Y set geometry of the main window\n"
+"\t-dbg feature[,feature]...\n"
+" select the features to debug.\n"
+" Type `lyx -dbg' to see the list of features\n"
+"\t-x [--execute] command\n"
+" where command is a lyx command.\n"
+"\t-e [--export] fmt\n"
+" where fmt is the export format of choice. Look in\n"
+" Tools->Preferences->File Handling->File Formats->Short "
+"Name\n"
+" to see which parameter (which differs from the format "
+"name\n"
+" in the File->Export menu) should be passed.\n"
+" Note that the order of -e and -x switches matters.\n"
+"\t-E [--export-to] fmt filename\n"
+" where fmt is the export format of choice (see --export),\n"
+" and filename is the destination filename.\n"
+"\t-i [--import] fmt file.xxx\n"
+" where fmt is the import format of choice\n"
+" and file.xxx is the file to be imported.\n"
+"\t-f [--force-overwrite] what\n"
+" where what is either `all', `main' or `none',\n"
+" specifying whether all files, main file only, or no "
+"files,\n"
+" respectively, are to be overwritten during a batch "
+"export.\n"
+" Anything else is equivalent to `all', but is not "
+"consumed.\n"
+"\t-n [--no-remote]\n"
+" open documents in a new instance\n"
+"\t-r [--remote]\n"
+" open documents in an already running instance\n"
+" (a working lyxpipe is needed)\n"
+"\t-batch execute commands without launching GUI and exit.\n"
+"\t-version summarize version and build info\n"
+"Check the LyX man page for more details."
+msgstr ""
+"用法: lyx [ コマンドラインスイッチ ] [ ファイル名.lyx ... ]\n"
+"コマンドラインスイッチ (大小文字は区別されます):\n"
+"\t-help LyXの用法の要約\n"
+"\t-userdir dir ユーザーディレクトリをdirに指定\n"
+"\t-sysdir dir システムディレクトリをdirに指定\n"
+"\t-geometry WxH+X+Y メインウィンドウの寸法を指定\n"
+"\t-dbg 機能[,機能]...\n"
+" デバッグする機能を選択する。機能の一覧は\n"
+" `lyx -dbg'で見ることができます。\n"
+"\t-x [--execute] command\n"
+" commandはlyxコマンドです。\n"
+"\t-e [--export] fmt\n"
+" fmtは書き出しの型を指定します。\n"
+" どのパラメーターを渡すべきかについては\n"
+" ツール→設定→ファイル処理→ファイル形式→短縮名を参照してくだ"
+"さい。\n"
+" -eと-xスイッチの順序は意味を持ちますので注意してくださ"
+"い。\n"
+"\t-E [--export-to] fmt ファイル名\n"
+" fmtは選択した書き出し型であり(--export参照)、\n"
+" ファイル名は書き出し先のファイル名です。\n"
+"\t-i [--import] fmt file.xxx\n"
+" fmtは読み込みの型、file.xxxは\n"
+" 読み込むファイルを指定します。\n"
+"\t-f [--force-overwrite] what\n"
+" ここで what は「all」か「main」か「none」であり、\n"
+" バッチエクスポート中に全ファイルを上書きするか、\n"
+" 主幹ファイルのみか上書きしないかを指定します。\n"
+" 他のものを指定すると「all」を意味しますが、推奨しません。\n"
+"\t-n [--no-remote]\n"
+" 文書を新しいインスタンスに開く\n"
+"\t-r [--remote]\n"
+" 文書を既に実行中のインスタンスに開く\n"
+" (動作可能となっているlyxpipeが必要です)\n"
+"\t-batch GUIや終了することなしに、終了します。\n"
+"\t-version バージョンとビルド情報を表示\n"
+"詳細は LyX man ページを見て下さい。"
+
+#: src/LyX.cpp:1093 src/frontends/qt4/GuiAbout.cpp:147
+msgid " Git commit hash "
+msgstr ""
+
+#: src/LyX.cpp:1095 src/frontends/qt4/GuiAbout.cpp:149
+#, c-format
+msgid "Built on %1$s[[date]], %2$s[[time]]"
+msgstr "%1$s[[date]], %2$s[[time]]にビルド"
+
+#: src/LyX.cpp:1106 src/support/Package.cpp:628
+msgid "No system directory"
+msgstr "システムディレクトリがありません"
+
+#: src/LyX.cpp:1107
+msgid "Missing directory for -sysdir switch"
+msgstr "-sysdirスイッチにディレクトリが指定されていません"
+
+#: src/LyX.cpp:1118
+msgid "No user directory"
+msgstr "ユーザーディレクトリがありません"
+
+#: src/LyX.cpp:1119
+msgid "Missing directory for -userdir switch"
+msgstr "-usedirスイッチにディレクトリが指定されていません"
+
+#: src/LyX.cpp:1130
+msgid "Incomplete command"
+msgstr "不完全なコマンド"
+
+#: src/LyX.cpp:1131
+msgid "Missing command string after --execute switch"
+msgstr "--executeスイッチの後にコマンド文字列が必要です"
+
+#: src/LyX.cpp:1142
+msgid "Missing file type [eg latex, ps...] after --export-to switch"
+msgstr "--export-toスイッチの後にファイル形式[latex, psなど]が必要です"
+
+#: src/LyX.cpp:1147
+msgid "Missing destination filename after --export-to switch"
+msgstr "--export-toスイッチの後にファイル名が必要です"
+
+#: src/LyX.cpp:1160
+msgid "Missing file type [eg latex, ps...] after --export switch"
+msgstr "--exportスイッチの後にファイル形式[latex, psなど]が必要です"
+
+#: src/LyX.cpp:1173
+msgid "Missing file type [eg latex, ps...] after --import switch"
+msgstr "--importスイッチの後にファイル形式[latex, psなど]が必要です"
+
+#: src/LyX.cpp:1178
+msgid "Missing filename for --import"
+msgstr "--importのファイル名が指定されていません"
+
+#: src/LyXRC.cpp:3080
+msgid ""
+"Consider run-together words, such as \"diskdrive\" for \"disk drive\", as "
+"legal words?"
+msgstr ""
+"\"disk drive\" を \"diskdrive\" のようにひとまとめにした単語を正しい単語と見"
+"なしますか?"
+
+#: src/LyXRC.cpp:3084
+msgid ""
+"Specify an alternate language. The default is to use the language of the "
+"document."
+msgstr "代理の言語を指定してください。既定値では,文書の言語を使います。"
+
+#: src/LyXRC.cpp:3092
+msgid ""
+"De-select if you don't want the current selection to be replaced "
+"automatically by what you type."
+msgstr ""
+"現在選択されている文字が,入力した文字で自動的に置換されるのを防ぎたいときに"
+"はチェックを外してください。"
+
+#: src/LyXRC.cpp:3096
+msgid ""
+"De-select if you don't want the class options to be reset to defaults after "
+"class change."
+msgstr ""
+"クラスを変更した後にクラスオプションが既定値にリセットされるのを防ぎたいとき"
+"は,チェックを外してください。"
+
+#: src/LyXRC.cpp:3100
+msgid ""
+"The time interval between auto-saves (in seconds). 0 means no auto-save."
+msgstr "自動保存の間の間隔(秒単位)。0 は自動保存しないことを示します。"
+
+#: src/LyXRC.cpp:3107
+msgid ""
+"The path for storing backup files. If it is an empty string, LyX will store "
+"the backup file in the same directory as the original file."
+msgstr ""
+"バックアップファイルを保管するパス。空の文字列のときは,LyX はバックアップ"
+"ファイルを,オリジナルファイルと同じディレクトリに保管します。"
+
+#: src/LyXRC.cpp:3111
+msgid ""
+"Define the options of bibtex (cf. man bibtex) or select an alternative "
+"compiler (e.g. mlbibtex or bibulus)."
+msgstr ""
+"bibtex のオプションを指定するか(man bibtex 参照),別のコンパイラ(例えば "
+"mibibtex や bibulus など)を選択してください。"
+
+#: src/LyXRC.cpp:3115
+msgid "Define the options of the bibtex program for PLaTeX (Japanese LaTeX)."
+msgstr ""
+"pLaTeX(日本語LaTeX)用のbibtexプログラムのオプションを定義してください。"