+#: src/Buffer.cpp:549 src/Buffer.cpp:555 src/BufferView.cpp:1126
+#: src/BufferView.cpp:1132
+msgid "Changes not shown in LaTeX output"
+msgstr "Cambios no mostrados en la salida LaTeX."
+
+#: src/Buffer.cpp:550 src/BufferView.cpp:1127
+msgid ""
+"Changes will not be highlighted in LaTeX output, because neither dvipost nor "
+"xcolor/soul are installed.\n"
+"Please install these packages or redefine \\lyxadded and \\lyxdeleted in the "
+"LaTeX preamble."
+msgstr ""
+"Los cambios no serán resaltados en la salida LaTeX, ya que ni dvipost ni "
+"xcolor/soul están instalados.\n"
+"Por favor instale estos paquetes o redefina \\lyxadded y \\lyxdeleted en el "
+"preámbulo LaTeX."
+
+#: src/Buffer.cpp:556 src/BufferView.cpp:1133
+msgid ""
+"Changes will not be highlighted in LaTeX output when using pdflatex, because "
+"xcolor and soul are not installed.\n"
+"Please install both packages or redefine \\lyxadded and \\lyxdeleted in the "
+"LaTeX preamble."
+msgstr ""
+"Los cambios no serán resaltados en la salida LaTeX cuando se use pdflatex, "
+"ya que xcolor y soul no están instalados.\n"
+"Por favor instale ambos paquetes o redefina \\lyxadded y \\lyxdeleted en el "
+"preámbulo LaTeX."
+
+#: src/Buffer.cpp:697 src/Buffer.cpp:780
+msgid "Document format failure"
+msgstr "Fallo al formatear documento"
+
+#: src/Buffer.cpp:698
+#, fuzzy, c-format
+msgid "%1$s is not a readable LyX document."
+msgstr "%1$s no es un documento de LyX."
+
+#: src/Buffer.cpp:735
+msgid "Conversion failed"
+msgstr "Falló la conversión"
+
+#: src/Buffer.cpp:736
+#, c-format
+msgid ""
+"%1$s is from a different version of LyX, but a temporary file for converting "
+"it could not be created."
+msgstr ""
+"%1$s es de una versión diferente de LyX, pero un archivo temporal para "
+"convertirlo no pudo ser creado."
+
+#: src/Buffer.cpp:745
+msgid "Conversion script not found"
+msgstr "Guión de conversión no encontrado"
+
+#: src/Buffer.cpp:746
+#, c-format
+msgid ""
+"%1$s is from a different version of LyX, but the conversion script lyx2lyx "
+"could not be found."
+msgstr ""
+"%1$s es de una versión diferente de LyX, pero el guión de conversión lyx2lyx "
+"no pudo ser encontrado."
+
+#: src/Buffer.cpp:765
+msgid "Conversion script failed"
+msgstr "Falló el guión de conversión"
+
+#: src/Buffer.cpp:766
+#, c-format
+msgid ""
+"%1$s is from a different version of LyX, but the lyx2lyx script failed to "
+"convert it."
+msgstr ""
+"%1$s es de una versión diferente de LyX, pero el guión lyx2lyx falló al "
+"convertirlo."
+
+#: src/Buffer.cpp:781
+#, c-format
+msgid "%1$s ended unexpectedly, which means that it is probably corrupted."
+msgstr ""
+"%1$s terminó inesperadamente, lo que quiere decir que probablemente esté "
+"corrupto."
+
+#: src/Buffer.cpp:814
+msgid "Backup failure"
+msgstr "fallo de copia de seguridad"
+
+#: src/Buffer.cpp:815
+#, c-format
+msgid ""
+"Cannot create backup file %1$s.\n"
+"Please check whether the directory exists and is writeable."
+msgstr ""
+"LyX no pudo copia de seguridad %1$s.\n"
+"Compruebe si existe el directorio y se puede escribir."
+
+#: src/Buffer.cpp:825
+#, c-format
+msgid ""
+"Document %1$s has been externally modified. Are you sure you want to "
+"overwrite this file?"
+msgstr ""
+"El documento %1$s ha sido modificado externamente. ¿Está seguro de que desea "
+"sobreescribir este archivo?"
+
+#: src/Buffer.cpp:827
+msgid "Overwrite modified file?"
+msgstr "¿Sobreescribir archivo modificado?"
+
+#: src/Buffer.cpp:828 src/Exporter.cpp:49 src/LyXFunc.cpp:980
+#: src/frontends/qt4/GuiClipboard.cpp:208 src/frontends/qt4/GuiView.cpp:1431
+#: src/frontends/qt4/GuiView.cpp:1609
+msgid "&Overwrite"
+msgstr "&Sobreescribir"
+
+#: src/Buffer.cpp:852
+#, c-format
+msgid "Saving document %1$s..."
+msgstr "Guardando documento %1$s..."
+
+#: src/Buffer.cpp:865
+#, fuzzy
+msgid " could not write file!"
+msgstr "No se pudo leer archivo"
+
+#: src/Buffer.cpp:872
+msgid " done."
+msgstr " hecho."
+
+#: src/Buffer.cpp:951
+#, fuzzy
+msgid "Iconv software exception Detected"
+msgstr "Detectada excepción del programa"
+
+#: src/Buffer.cpp:951
+#, c-format
+msgid ""
+"Please verify that the support software for your encoding (%1$s) is properly "
+"installed"
+msgstr ""
+
+#: src/Buffer.cpp:973
+#, c-format
+msgid "Could not find LaTeX command for character '%1$s' (code point %2$s)"
+msgstr ""
+
+#: src/Buffer.cpp:976
+msgid ""
+"Some characters of your document are probably not representable in the "
+"chosen encoding.\n"
+"Changing the document encoding to utf8 could help."
+msgstr ""
+"Algunos caracteres de su documento no son representables en la codificación "
+"elegida.\n"
+"Cambiar la codificación del documento a utf8 podría ayudar."
+
+#: src/Buffer.cpp:983
+#, fuzzy
+msgid "iconv conversion failed"
+msgstr "Falló la conversión"
+
+#: src/Buffer.cpp:988
+#, fuzzy
+msgid "conversion failed"
+msgstr "Falló la conversión"
+
+#: src/Buffer.cpp:1260
+msgid "Running chktex..."
+msgstr "Ejecutando chktex..."
+
+#: src/Buffer.cpp:1273
+msgid "chktex failure"
+msgstr "fallo de chktex"
+
+#: src/Buffer.cpp:1274
+msgid "Could not run chktex successfully."
+msgstr "No se pudo ejecutar chktex satisfactoriamente."
+
+#: src/Buffer.cpp:2098
+msgid "Preview source code"
+msgstr "Vista preliminar del código fuente"
+
+#: src/Buffer.cpp:2110
+#, c-format
+msgid "Preview source code for paragraph %1$d"
+msgstr "Vista preliminar del código fuente para el párrafo %1$d"
+
+#: src/Buffer.cpp:2114
+#, c-format
+msgid "Preview source code from paragraph %1$s to %2$s"
+msgstr "Vista preliminar del código fuente del párrafo %1$s al %2$s"
+
+#: src/Buffer.cpp:2213
+#, c-format
+msgid "Auto-saving %1$s"
+msgstr "Auto-guardado %1$s"
+
+#: src/Buffer.cpp:2257
+msgid "Autosave failed!"
+msgstr "¡El auto-guardado falló!"
+
+#: src/Buffer.cpp:2280
+msgid "Autosaving current document..."
+msgstr "Autoguardando documento actual..."
+
+#: src/Buffer.cpp:2328
+msgid "Couldn't export file"
+msgstr "No se pudo exportar archivo"
+
+#: src/Buffer.cpp:2329
+#, c-format
+msgid "No information for exporting the format %1$s."
+msgstr "Sin información para exportar el formato %1$s."
+
+#: src/Buffer.cpp:2366
+msgid "File name error"
+msgstr "Error del nombre de archivo"
+
+#: src/Buffer.cpp:2367
+msgid "The directory path to the document cannot contain spaces."
+msgstr "La ruta del directorio al documento no puede contener espacios."
+
+#: src/Buffer.cpp:2408
+msgid "Document export cancelled."
+msgstr "Exportación del documento cancelada."
+
+#: src/Buffer.cpp:2414
+#, c-format
+msgid "Document exported as %1$s to file `%2$s'"
+msgstr "Documento exportado como %1$s al archivo `%2$s'"
+
+#: src/Buffer.cpp:2420
+#, c-format
+msgid "Document exported as %1$s"
+msgstr "Documento exportado como %1$s"
+
+#: src/Buffer.cpp:2490
+#, c-format
+msgid ""
+"The specified document\n"
+"%1$s\n"
+"could not be read."
+msgstr ""
+"El documento especificado\n"
+"%1$s\n"
+"no se pudo leer."
+
+#: src/Buffer.cpp:2492
+msgid "Could not read document"
+msgstr "No se pudo leer el documento"
+
+#: src/Buffer.cpp:2502
+#, c-format
+msgid ""
+"An emergency save of the document %1$s exists.\n"
+"\n"
+"Recover emergency save?"
+msgstr ""
+"Existe un guardado de emergencia del documento %1$s.\n"
+"\n"
+"¿Recuperar el guardado de emergencia?"
+
+#: src/Buffer.cpp:2505
+msgid "Load emergency save?"
+msgstr "¿Cargar guardado de emergencia?"
+
+#: src/Buffer.cpp:2506
+msgid "&Recover"
+msgstr "&Recuperar"
+
+#: src/Buffer.cpp:2506
+msgid "&Load Original"
+msgstr "&Cargar original"
+
+#: src/Buffer.cpp:2526
+#, c-format
+msgid ""
+"The backup of the document %1$s is newer.\n"
+"\n"
+"Load the backup instead?"
+msgstr ""
+"La copia de seguridad del documento %1$s es más nueva.\n"
+"\n"
+"¿Cargar la copia de seguridad en su lugar?"
+
+#: src/Buffer.cpp:2529
+msgid "Load backup?"
+msgstr "¿Cargar copia de seguridad?"
+
+#: src/Buffer.cpp:2530
+msgid "&Load backup"
+msgstr "Cargar copia de &seguridad"
+
+#: src/Buffer.cpp:2530
+msgid "Load &original"
+msgstr "Cargar &original"
+
+#: src/Buffer.cpp:2563
+#, c-format
+msgid "Do you want to retrieve the document %1$s from version control?"
+msgstr "¿Desea recuperar el documento %1$s de la versión de control?"
+
+#: src/Buffer.cpp:2565
+msgid "Retrieve from version control?"
+msgstr "¿Recuperar de la versión de control?"
+
+#: src/Buffer.cpp:2566
+msgid "&Retrieve"
+msgstr "&Recuperar"
+
+#: src/BufferList.cpp:220
+#, fuzzy
+msgid "No file open!"
+msgstr "¡Archivo no encontrado!"
+
+#: src/BufferList.cpp:230
+#, fuzzy, c-format
+msgid "LyX: Attempting to save document %1$s\n"
+msgstr "LyX: Intentando guardar documento %1$s"
+
+#: src/BufferList.cpp:240 src/BufferList.cpp:253 src/BufferList.cpp:267
+#, fuzzy
+msgid " Save seems successful. Phew.\n"
+msgstr " Guardar parece satisfactorio. ¡Puf!"
+
+#: src/BufferList.cpp:243 src/BufferList.cpp:257
+#, fuzzy
+msgid " Save failed! Trying...\n"
+msgstr " ¡Guardar falló! Intentando..."
+
+#: src/BufferList.cpp:271
+msgid " Save failed! Bummer. Document is lost."
+msgstr " ¡Guardar falló! Desastre. El documento se perdió."
+
+#: src/BufferParams.cpp:481
+#, c-format
+msgid ""
+"The layout file requested by this document,\n"
+"%1$s.layout,\n"
+"is not usable. This is probably because a LaTeX\n"
+"class or style file required by it is not\n"
+"available. See the Customization documentation\n"
+"for more information.\n"
+msgstr ""
+"El archivo de diseño requerido por este documento,\n"
+"%1$s.layout,\n"
+"no es usable. Esto se debe probablemente porque un archivo\n"
+"de clase o estilo LaTeX que necesita no está disponible. Vea la "
+"documentación de personalización para más información.\n"
+
+#: src/BufferParams.cpp:487
+msgid "Document class not available"
+msgstr "Clase de documento no disponible"
+
+#: src/BufferParams.cpp:488
+msgid "LyX will not be able to produce output."
+msgstr "LyX será incapaz de producir salida."
+
+#: src/BufferParams.cpp:1424
+#, fuzzy, c-format
+msgid "The document class %1$s could not be found."
+msgstr ""
+"El documento especificado\n"
+"%1$s\n"
+"no se pudo leer."
+
+#: src/BufferParams.cpp:1426
+#, fuzzy
+msgid "Class not found"
+msgstr "Archivo no encontrado"
+
+#: src/BufferParams.cpp:1436 src/LyXFunc.cpp:697
+#, fuzzy, c-format
+msgid "The document class %1$s could not be loaded."
+msgstr ""
+"El documento especificado\n"
+"%1$s\n"
+"no se pudo leer."
+
+#: src/BufferParams.cpp:1438 src/LyXFunc.cpp:699
+#, fuzzy
+msgid "Could not load class"
+msgstr "No se pudo cambiar clase"
+
+#: src/BufferParams.cpp:1474
+#, c-format
+msgid ""
+"The module %1$s has been requested by\n"
+"this document but has not been found in the list of\n"
+"available modules. If you recently installed it, you\n"
+"probably need to reconfigure LyX.\n"
+msgstr ""
+
+#: src/BufferParams.cpp:1478
+#, fuzzy
+msgid "Module not available"
+msgstr "Clase de documento no disponible"
+
+#: src/BufferParams.cpp:1479
+#, fuzzy
+msgid "Some layouts may not be available."
+msgstr "Clase de documento no disponible"
+
+#: src/BufferParams.cpp:1486
+#, c-format
+msgid ""
+"The module %1$s requires a package that is\n"
+"not available in your LaTeX installation. LaTeX output\n"
+"may not be possible.\n"
+msgstr ""
+
+#: src/BufferParams.cpp:1489
+#, fuzzy
+msgid "Package not available"
+msgstr "Clase de documento no disponible"
+
+#: src/BufferParams.cpp:1494
+#, c-format
+msgid "Error reading module %1$s\n"
+msgstr ""
+
+#: src/BufferParams.cpp:1495 src/BufferParams.cpp:1501
+#, fuzzy
+msgid "Read Error"
+msgstr "Buscar error"
+
+#: src/BufferParams.cpp:1500
+#, fuzzy
+msgid "Error reading internal layout information"
+msgstr "Información general"
+
+#: src/BufferView.cpp:177
+msgid "No more insets"
+msgstr "No más recuadros"
+
+#: src/BufferView.cpp:669
+msgid "Save bookmark"
+msgstr "Guardar marcador"
+
+#: src/BufferView.cpp:1013
+msgid "No further undo information"
+msgstr "No hay más información de deshacer"
+
+#: src/BufferView.cpp:1022
+msgid "No further redo information"
+msgstr "No hay más información de rehacer"
+
+#: src/BufferView.cpp:1176 src/lyxfind.cpp:295 src/lyxfind.cpp:313
+msgid "String not found!"
+msgstr "¡Cadena no encontrada!"
+
+#: src/BufferView.cpp:1200
+msgid "Mark off"
+msgstr "Marca desactivada"
+
+#: src/BufferView.cpp:1207
+msgid "Mark on"
+msgstr "Marca activada"
+
+#: src/BufferView.cpp:1214
+msgid "Mark removed"
+msgstr "Marca quitada"
+
+#: src/BufferView.cpp:1217
+msgid "Mark set"
+msgstr "Marca puesta"
+
+#: src/BufferView.cpp:1264
+#, fuzzy
+msgid "Statistics for the selection:"
+msgstr "&Cambiar al documento"
+
+#: src/BufferView.cpp:1266
+#, fuzzy
+msgid "Statistics for the document:"
+msgstr "&Cambiar al documento"
+
+#: src/BufferView.cpp:1269
+#, fuzzy, c-format
+msgid "%1$d words"
+msgstr "%1$d palabras comprobadas."
+
+#: src/BufferView.cpp:1271
+#, fuzzy
+msgid "One word"
+msgstr "Palabra clave"
+
+#: src/BufferView.cpp:1274
+#, c-format
+msgid "%1$d characters (including blanks)"
+msgstr ""
+
+#: src/BufferView.cpp:1277
+msgid "One character (including blanks)"
+msgstr ""
+
+#: src/BufferView.cpp:1280
+#, c-format
+msgid "%1$d characters (excluding blanks)"
+msgstr ""
+
+#: src/BufferView.cpp:1283
+msgid "One character (excluding blanks)"
+msgstr ""
+
+#: src/BufferView.cpp:1285
+#, fuzzy
+msgid "Statistics"
+msgstr "Estado"
+
+#: src/BufferView.cpp:1963
+#, c-format
+msgid "Inserting document %1$s..."
+msgstr "Insertando documento %1$s..."
+
+#: src/BufferView.cpp:1974
+#, c-format
+msgid "Document %1$s inserted."
+msgstr "Documento %1$s insertado."
+
+#: src/BufferView.cpp:1976
+#, c-format
+msgid "Could not insert document %1$s"
+msgstr "No se pudo insertar documento %1$s"
+
+#: src/BufferView.cpp:2202
+#, c-format
+msgid ""
+"Could not read the specified document\n"
+"%1$s\n"
+"due to the error: %2$s"
+msgstr ""
+"No se pudo leer el documento especificado\n"
+"%1$s\n"
+"debido al error: %2$s"
+
+#: src/BufferView.cpp:2204
+msgid "Could not read file"
+msgstr "No se pudo leer archivo"
+
+#: src/BufferView.cpp:2211
+#, fuzzy, c-format
+msgid ""
+"%1$s\n"
+" is not readable."
+msgstr "%1$s no se pudo leer."
+
+#: src/BufferView.cpp:2212 src/output.cpp:39
+msgid "Could not open file"
+msgstr "No se pudo abrir el archivo"
+
+#: src/BufferView.cpp:2219
+msgid "Reading not UTF-8 encoded file"
+msgstr "Leyendo archivo no codificado en UTF-8"
+
+#: src/BufferView.cpp:2220
+msgid ""
+"The file is not UTF-8 encoded.\n"
+"It will be read as local 8Bit-encoded.\n"
+"If this does not give the correct result\n"
+"then please change the encoding of the file\n"
+"to UTF-8 with a program other than LyX.\n"
+msgstr ""
+"El archivo no está codificado en UTF-8.\n"
+"Será leído como codificado local a 8Bit.\n"
+"Si esto no da el resultado correcto\n"
+"entonces por favor cambie la codificación del archivo\n"
+"a UTF-8 con otro programa que no sea LyX.\n"
+
+#: src/Chktex.cpp:63
+#, c-format
+msgid "ChkTeX warning id # %1$d"
+msgstr "Aviso de ChkTeX id # %1$d"
+
+#: src/Chktex.cpp:65
+msgid "ChkTeX warning id # "
+msgstr "Aviso de ChkTeX id # "
+
+#: src/Color.cpp:95 src/insets/InsetBibtex.cpp:173
+#: src/insets/InsetBibtex.cpp:198
+msgid "none"
+msgstr "ninguno"
+
+#: src/Color.cpp:96
+msgid "black"
+msgstr "negro"
+
+#: src/Color.cpp:97
+msgid "white"
+msgstr "blanco"
+
+#: src/Color.cpp:98
+msgid "red"
+msgstr "rojo"
+
+#: src/Color.cpp:99
+msgid "green"
+msgstr "verde"
+
+#: src/Color.cpp:100
+msgid "blue"
+msgstr "azul"
+
+#: src/Color.cpp:101
+msgid "cyan"
+msgstr "cyan"
+
+#: src/Color.cpp:102
+msgid "magenta"
+msgstr "magenta"
+
+#: src/Color.cpp:103
+msgid "yellow"
+msgstr "amarillo"
+
+#: src/Color.cpp:104
+msgid "cursor"
+msgstr "cursor"
+
+#: src/Color.cpp:105
+msgid "background"
+msgstr "fondo"
+
+#: src/Color.cpp:106
+msgid "text"
+msgstr "texto"
+
+#: src/Color.cpp:107
+msgid "selection"
+msgstr "selección"
+
+#: src/Color.cpp:108
+#, fuzzy
+msgid "selected text"
+msgstr "texto borrado"
+
+#: src/Color.cpp:110
+msgid "LaTeX text"
+msgstr "texto LaTeX"
+
+#: src/Color.cpp:111
+#, fuzzy
+msgid "inline completion"
+msgstr "&Listado insertado"
+
+#: src/Color.cpp:113
+#, fuzzy
+msgid "non-unique inline completion"
+msgstr "&Listado insertado"
+
+#: src/Color.cpp:115
+msgid "previewed snippet"
+msgstr "retazo preliminar"
+
+#: src/Color.cpp:116
+#, fuzzy
+msgid "note label"
+msgstr "Nota al pie"
+
+#: src/Color.cpp:117
+msgid "note background"
+msgstr "fondo de nota"
+
+#: src/Color.cpp:118
+#, fuzzy
+msgid "comment label"
+msgstr "comentario"
+
+#: src/Color.cpp:119
+msgid "comment background"
+msgstr "fondo del comentario"
+
+#: src/Color.cpp:120
+#, fuzzy
+msgid "greyedout inset label"
+msgstr "recuadro resaltado en gris"
+
+#: src/Color.cpp:121
+msgid "greyedout inset background"
+msgstr "fondo de recuadro resaltado en gris"
+
+#: src/Color.cpp:122
+msgid "shaded box"
+msgstr "cuadro sombreado"
+
+#: src/Color.cpp:123
+#, fuzzy
+msgid "branch label"
+msgstr "rama"
+
+#: src/Color.cpp:124
+#, fuzzy
+msgid "footnote label"
+msgstr "Nota al pie"
+
+#: src/Color.cpp:125
+#, fuzzy
+msgid "index label"
+msgstr "Insertar etiqueta"
+
+#: src/Color.cpp:126
+#, fuzzy
+msgid "margin note label"
+msgstr "Saltar a la etiqueta"
+
+#: src/Color.cpp:127
+#, fuzzy
+msgid "URL label"
+msgstr "Etiqueta"
+
+#: src/Color.cpp:128
+#, fuzzy
+msgid "URL text"
+msgstr "texto"
+
+#: src/Color.cpp:129
+msgid "depth bar"
+msgstr "barra de profundidad"
+
+#: src/Color.cpp:130
+msgid "language"
+msgstr "idioma"
+
+#: src/Color.cpp:131
+msgid "command inset"
+msgstr "recuadro de comando"
+
+#: src/Color.cpp:132
+msgid "command inset background"
+msgstr "fondo del recuadro de comando"
+
+#: src/Color.cpp:133
+msgid "command inset frame"
+msgstr "marco del recuadro de comando"
+
+#: src/Color.cpp:134
+msgid "special character"
+msgstr "carácter especial"
+
+#: src/Color.cpp:135
+msgid "math"
+msgstr "ecuaciones"
+
+#: src/Color.cpp:136
+msgid "math background"
+msgstr "fondo de ecuaciones"
+
+#: src/Color.cpp:137
+msgid "graphics background"
+msgstr "fondo de los gráficos"
+
+#: src/Color.cpp:138 src/Color.cpp:142
+msgid "Math macro background"
+msgstr "fondo del marco de ecuaciones"
+
+#: src/Color.cpp:139
+msgid "math frame"
+msgstr "marco de ecuaciones"
+
+#: src/Color.cpp:140
+msgid "math corners"
+msgstr "esquinas de ecuaciones"
+
+#: src/Color.cpp:141
+msgid "math line"
+msgstr "línea de ecuaciones"
+
+#: src/Color.cpp:143
+#, fuzzy
+msgid "Math macro hovered background"
+msgstr "fondo del marco de ecuaciones"
+
+#: src/Color.cpp:144
+#, fuzzy
+msgid "Math macro label"
+msgstr "macro ecuación"
+
+#: src/Color.cpp:145
+#, fuzzy
+msgid "Math macro frame"
+msgstr "marco de ecuaciones"
+
+#: src/Color.cpp:146
+#, fuzzy
+msgid "Math macro blended out"
+msgstr "fondo del marco de ecuaciones"
+
+#: src/Color.cpp:147
+#, fuzzy
+msgid "Math macro old parameter"
+msgstr "marco de ecuaciones"
+
+#: src/Color.cpp:148
+#, fuzzy
+msgid "Math macro new parameter"
+msgstr "marco de ecuaciones"
+
+#: src/Color.cpp:149
+msgid "caption frame"
+msgstr "marco de leyenda"
+
+#: src/Color.cpp:150
+msgid "collapsable inset text"
+msgstr "texto de recuadro plegable"
+
+#: src/Color.cpp:151
+msgid "collapsable inset frame"
+msgstr "marco de recuadro plegable"
+
+#: src/Color.cpp:152
+msgid "inset background"
+msgstr "fondo de recuadro"
+
+#: src/Color.cpp:153
+msgid "inset frame"
+msgstr "marco de recuadro"
+
+#: src/Color.cpp:154
+msgid "LaTeX error"
+msgstr "error de LaTeX"
+
+#: src/Color.cpp:155
+msgid "end-of-line marker"
+msgstr "marcador fin de línea"
+
+#: src/Color.cpp:156
+msgid "appendix marker"
+msgstr "marcador del apéndice"
+
+#: src/Color.cpp:157
+msgid "change bar"
+msgstr "barra de cambios"
+
+#: src/Color.cpp:158
+msgid "Deleted text"
+msgstr "texto borrado"
+
+#: src/Color.cpp:159
+msgid "Added text"
+msgstr "texto añadido"
+
+#: src/Color.cpp:160
+msgid "added space markers"
+msgstr "marcadores de espacio añadidos"
+
+#: src/Color.cpp:161
+msgid "top/bottom line"
+msgstr "línea superior/inferior"
+
+#: src/Color.cpp:162
+msgid "table line"
+msgstr "línea tabular"
+
+#: src/Color.cpp:163
+msgid "table on/off line"
+msgstr "línea activar/desactivar de tabla"
+
+#: src/Color.cpp:165
+msgid "bottom area"
+msgstr "área inferior"
+
+#: src/Color.cpp:166
+#, fuzzy
+msgid "new page"
+msgstr "en página <página>"
+
+#: src/Color.cpp:167
+#, fuzzy
+msgid "page break / line break"
+msgstr "salto de página"
+
+#: src/Color.cpp:168
+msgid "frame of button"
+msgstr "marco del botón"
+
+#: src/Color.cpp:169
+msgid "button background"
+msgstr "fondo del botón"
+
+#: src/Color.cpp:170
+msgid "button background under focus"
+msgstr "fondo del botón bajo el foco"
+
+#: src/Color.cpp:171
+msgid "inherit"
+msgstr "heredar"
+
+#: src/Color.cpp:172
+msgid "ignore"
+msgstr "ignorar"
+
+#: src/Converter.cpp:305 src/Converter.cpp:448 src/Converter.cpp:471
+#: src/Converter.cpp:514
+msgid "Cannot convert file"
+msgstr "No se puede convertir archivo"
+
+#: src/Converter.cpp:306
+#, c-format
+msgid ""
+"No information for converting %1$s format files to %2$s.\n"
+"Define a converter in the preferences."
+msgstr ""
+"Sin información para convertir los archivos de formato %1$s a %2$s.\n"
+"Defina un convertidor en las preferencias."
+
+#: src/Converter.cpp:403 src/Format.cpp:305 src/Format.cpp:377
+msgid "Executing command: "
+msgstr "Ejecutando comando: "
+
+#: src/Converter.cpp:443
+msgid "Build errors"
+msgstr "Errores de construcción"
+
+#: src/Converter.cpp:444
+msgid "There were errors during the build process."
+msgstr "Hubo errores durante el proceso de construcción."
+
+#: src/Converter.cpp:449 src/Format.cpp:312 src/Format.cpp:384
+#, c-format
+msgid "An error occurred whilst running %1$s"
+msgstr "Ocurrió un error mientras se ejecutaba %1$s"
+
+#: src/Converter.cpp:472
+#, c-format
+msgid "Could not move a temporary directory from %1$s to %2$s."
+msgstr "No se pudo mover a un directorio temporal de %1$s a %2$s."
+
+#: src/Converter.cpp:516
+#, c-format
+msgid "Could not copy a temporary file from %1$s to %2$s."
+msgstr "No se pudo copiar un archivo temporal de %1$s a %2$s."
+
+#: src/Converter.cpp:517
+#, c-format
+msgid "Could not move a temporary file from %1$s to %2$s."
+msgstr "No se pudo mover un archivo temporal de %1$s a %2$s."
+
+#: src/Converter.cpp:573
+msgid "Running LaTeX..."
+msgstr "Ejecutando LaTeX..."
+
+#: src/Converter.cpp:591
+#, c-format
+msgid ""
+"LaTeX did not run successfully. Additionally, LyX could not locate the LaTeX "
+"log %1$s."
+msgstr ""
+"LaTeX no se ejecutó con éxito. Además, LyX no pudo localizar el registro de "
+"LaTeX %1$s."
+
+#: src/Converter.cpp:594
+msgid "LaTeX failed"
+msgstr "LaTeX falló"
+
+#: src/Converter.cpp:596
+msgid "Output is empty"
+msgstr "La salida está vacía"
+
+#: src/Converter.cpp:597
+msgid "An empty output file was generated."
+msgstr "Un archivo de salida vacío fue generado."
+
+#: src/CutAndPaste.cpp:516
+#, c-format
+msgid ""
+"Layout had to be changed from\n"
+"%1$s to %2$s\n"
+"because of class conversion from\n"
+"%3$s to %4$s"
+msgstr ""
+"El estilo tenía que ser cambiado de\n"
+"%1$s a %2$s\n"
+"a causa de la conversión de clase de\n"
+"%3$s a %4$s"
+
+#: src/CutAndPaste.cpp:521
+msgid "Changed Layout"
+msgstr "Formato cambiado"
+
+#: src/CutAndPaste.cpp:541
+#, fuzzy, c-format
+msgid ""
+"Flex inset %1$s is undefined because of class conversion from\n"
+"%2$s to %3$s"
+msgstr ""
+"El estilo de carácter %1$s no está definido debido a la conversión de clase "
+"de\n"
+"%2$s a %3$s"
+
+#: src/CutAndPaste.cpp:548
+#, fuzzy
+msgid "Undefined flex inset"
+msgstr "Recuadro de texto abierto"
+
+#: src/Exporter.cpp:44 src/LyXFunc.cpp:976
+#, c-format
+msgid ""
+"The file %1$s already exists.\n"
+"\n"
+"Do you want to overwrite that file?"
+msgstr ""
+"El archivo %1$s ya existe.\n"
+"\n"
+"¿Desea sobreescribir ese archivo?"
+
+#: src/Exporter.cpp:47 src/LyXFunc.cpp:979
+msgid "Overwrite file?"
+msgstr "¿Sobreescribir archivo?"
+
+#: src/Exporter.cpp:49
+msgid "Overwrite &all"
+msgstr "Sobreescribir &todo"
+
+#: src/Exporter.cpp:50
+msgid "&Cancel export"
+msgstr "&Cancelar exportar"
+
+#: src/Exporter.cpp:90
+msgid "Couldn't copy file"
+msgstr "No se pudo copiar archivo"
+
+#: src/Exporter.cpp:91
+#, c-format
+msgid "Copying %1$s to %2$s failed."
+msgstr "La copia de %1$s a %2$s falló."
+
+#: src/Font.cpp:49 src/frontends/qt4/GuiCharacter.cpp:118
+#: src/frontends/qt4/GuiDocument.cpp:2141
+#: src/frontends/qt4/GuiListings.cpp:158
+msgid "Roman"
+msgstr "Roman"
+
+#: src/Font.cpp:49 src/frontends/qt4/GuiCharacter.cpp:119
+#: src/frontends/qt4/GuiDocument.cpp:2141
+#: src/frontends/qt4/GuiListings.cpp:158
+msgid "Sans Serif"
+msgstr "Sans Serif"
+
+#: src/Font.cpp:49 src/frontends/qt4/GuiCharacter.cpp:120
+#: src/frontends/qt4/GuiDocument.cpp:2141
+#: src/frontends/qt4/GuiListings.cpp:158
+msgid "Typewriter"
+msgstr "Typewriter"
+
+#: src/Font.cpp:49
+msgid "Symbol"
+msgstr "Símbolo"
+
+#: src/Font.cpp:51 src/Font.cpp:54 src/Font.cpp:57 src/Font.cpp:63
+#: src/Font.cpp:66
+msgid "Inherit"
+msgstr "Heredar"
+
+#: src/Font.cpp:54 src/frontends/qt4/GuiCharacter.cpp:107
+msgid "Medium"
+msgstr "Medio"
+
+#: src/Font.cpp:54 src/frontends/qt4/GuiCharacter.cpp:108
+msgid "Bold"
+msgstr "Negrita"
+
+#: src/Font.cpp:57 src/frontends/qt4/GuiCharacter.cpp:43
+msgid "Upright"
+msgstr "Vertical"
+
+#: src/Font.cpp:57 src/frontends/qt4/GuiCharacter.cpp:44
+msgid "Italic"
+msgstr "Cursiva"
+
+#: src/Font.cpp:57 src/frontends/qt4/GuiCharacter.cpp:45
+msgid "Slanted"
+msgstr "Inclinada"
+
+#: src/Font.cpp:57
+msgid "Smallcaps"
+msgstr "Versalitas"
+
+#: src/Font.cpp:62 src/frontends/qt4/GuiCharacter.cpp:66
+msgid "Increase"
+msgstr "Aumentar"
+
+#: src/Font.cpp:62 src/frontends/qt4/GuiCharacter.cpp:67
+msgid "Decrease"
+msgstr "Disminuir"
+
+#: src/Font.cpp:66
+msgid "Toggle"
+msgstr "Conmutar"
+
+#: src/Font.cpp:173
+#, c-format
+msgid "Emphasis %1$s, "
+msgstr "Énfasis %1$s, "
+
+#: src/Font.cpp:176
+#, c-format
+msgid "Underline %1$s, "
+msgstr "Subrayar %1$s, "
+
+#: src/Font.cpp:179
+#, c-format
+msgid "Noun %1$s, "
+msgstr "Versalitas %1$s, "
+
+#: src/Font.cpp:193
+#, c-format
+msgid "Language: %1$s, "
+msgstr "Idioma: %1$s, "
+
+#: src/Font.cpp:196
+#, c-format
+msgid " Number %1$s"
+msgstr " Número %1$s"
+
+#: src/Format.cpp:253 src/Format.cpp:266 src/Format.cpp:276 src/Format.cpp:311
+msgid "Cannot view file"
+msgstr "No se puede ver el archivo"
+
+#: src/Format.cpp:254 src/Format.cpp:325
+#, c-format
+msgid "File does not exist: %1$s"
+msgstr "El archivo no existe: %1$s"
+
+#: src/Format.cpp:267
+#, c-format
+msgid "No information for viewing %1$s"
+msgstr "No hay información para ver %1$s"
+
+#: src/Format.cpp:277
+#, c-format
+msgid "Auto-view file %1$s failed"
+msgstr "Auto-vista del archivo %1$s falló"
+
+#: src/Format.cpp:324 src/Format.cpp:336 src/Format.cpp:349 src/Format.cpp:360
+#: src/Format.cpp:383
+msgid "Cannot edit file"
+msgstr "No se puede editar archivo"
+
+#: src/Format.cpp:337
+msgid "LinkBack files can only be edited on Apple Mac OSX."
+msgstr ""
+
+#: src/Format.cpp:350
+#, c-format
+msgid "No information for editing %1$s"
+msgstr "Sin información para editar %1$s"
+
+#: src/Format.cpp:361
+#, c-format
+msgid "Auto-edit file %1$s failed"
+msgstr "Auto-edición del archivo %1$s falló"
+
+#: src/ISpell.cpp:227 src/ISpell.cpp:234 src/ISpell.cpp:243
+msgid "Can't create pipe for spellchecker."
+msgstr "No puedo crear el \"pipe\" para el corrector ortográfico."
+
+#: src/ISpell.cpp:248 src/ISpell.cpp:253 src/ISpell.cpp:258
+msgid "Can't open pipe for spellchecker."
+msgstr "No puedo abrir el \"pipe\" para el corrector ortográfico."
+
+#: src/ISpell.cpp:267
+msgid ""
+"Could not create an ispell process.\n"
+"You may not have the right languages installed."
+msgstr ""
+"No se pudo crear un proceso ispell.\n"
+"Puede que no tenga instalados los idiomas adecuados."
+
+#: src/ISpell.cpp:290
+msgid ""
+"The ispell process returned an error.\n"
+"Perhaps it has been configured wrongly ?"
+msgstr ""
+"El proceso ispell devolvió un error.\n"
+"¿Quizá se haya configurado incorrectamente?"
+
+#: src/ISpell.cpp:395
+#, c-format
+msgid ""
+"Could not check word `%1$s' because it could not be converted to encoding `%2"
+"$s'."
+msgstr ""
+"No se pudo comprobar la palabra `%1$s' porque no se pudo convertir a la "
+"codificación `%2$s'."
+
+#: src/ISpell.cpp:406
+msgid "Could not communicate with the ispell spellchecker process."
+msgstr "No se pudo comunicar con el proceso del corrector ortográfico ispell."
+
+#: src/ISpell.cpp:466
+#, c-format
+msgid ""
+"Could not insert word `%1$s' because it could not be converted to encoding `%"
+"2$s'."
+msgstr ""
+"No se pudo insertar la palabra `%1$s' porque no se pudo convertir a la "
+"codificación `%2$s'."
+
+#: src/ISpell.cpp:481
+#, c-format
+msgid ""
+"Could not accept word `%1$s' because it could not be converted to encoding `%"
+"2$s'."
+msgstr ""
+"No se pudo aceptar la palabra `%1$s' porque no se pudo convertir a la "
+"codificación `%2$s'."
+
+#: src/KeySequence.cpp:167
+msgid " options: "
+msgstr " opciones: "
+
+#: src/LaTeX.cpp:61
+#, c-format
+msgid "Waiting for LaTeX run number %1$d"
+msgstr "Esperando el número de ejecución LaTeX %1$d"
+
+#: src/LaTeX.cpp:264 src/LaTeX.cpp:338
+msgid "Running MakeIndex."
+msgstr "Ejecutando MakeIndex."
+
+#: src/LaTeX.cpp:284
+msgid "Running BibTeX."
+msgstr "Ejecutando BibTeX."
+
+#: src/LaTeX.cpp:418
+msgid "Running MakeIndex for nomencl."
+msgstr "Ejecutando MakeIndex para nomencl."
+
+#: src/LyX.cpp:99
+msgid "Could not read configuration file"
+msgstr "No se pudo leer archivo de configuración"
+
+#: src/LyX.cpp:100 src/frontends/qt4/GuiApplication.cpp:1336
+#, c-format
+msgid ""
+"Error while reading the configuration file\n"
+"%1$s.\n"
+"Please check your installation."
+msgstr ""
+"Error al leer el archivo de configuración\n"
+"%1$s.\n"
+"Compruebe su instalación."
+
+#: src/LyX.cpp:109
+msgid "LyX: reconfiguring user directory"
+msgstr "LyX: reconfigurando directorio del usuario"
+
+#: src/LyX.cpp:113
+msgid "Done!"
+msgstr "¡Hecho!"
+
+#: src/LyX.cpp:476
+#, fuzzy, c-format
+msgid "%1$s does not appear like a LyX created temporary directory."
+msgstr "No se pudo crear directorio temporal"
+
+#: src/LyX.cpp:478
+#, fuzzy
+msgid "Cannot remove temporary directory"
+msgstr "No se pudo eliminar directorio temporal"
+
+#: src/LyX.cpp:484
+#, c-format
+msgid "Unable to remove the temporary directory %1$s"
+msgstr "No fue posible eliminar el directorio temporal %1$s"
+
+#: src/LyX.cpp:486
+msgid "Unable to remove temporary directory"
+msgstr "No fue posible eliminar el directorio temporal"
+
+#: src/LyX.cpp:515
+#, c-format
+msgid "Wrong command line option `%1$s'. Exiting."
+msgstr "Opción de la línea de comandos incorrecta `%1$s'. Saliendo."
+
+#: src/LyX.cpp:582
+msgid "No textclass is found"
+msgstr "No se encuentra ninguna clase textual"
+
+#: src/LyX.cpp:583
+msgid ""
+"LyX cannot continue because no textclass is found. You can either "
+"reconfigure normally, or reconfigure using default textclasses, or quit LyX."
+msgstr ""
+"LyX no puede continuar porque no se encuentra ninguna clase de texto. Puede "
+"bien reconfigurar normalmente, o reconfigurar usando las clases de texto "
+"predeterminadas, o salir de LyX."
+
+#: src/LyX.cpp:587
+msgid "&Reconfigure"
+msgstr "&Reconfigurar"
+
+#: src/LyX.cpp:588
+msgid "&Use Default"
+msgstr "&Usar predeterminados"
+
+#: src/LyX.cpp:589 src/LyX.cpp:949
+msgid "&Exit LyX"
+msgstr "&Salir de LyX"
+
+#: src/LyX.cpp:736 src/frontends/qt4/GuiView.cpp:639
+msgid "LyX: "
+msgstr "LyX: "
+
+#: src/LyX.cpp:858
+msgid "Could not create temporary directory"
+msgstr "No se pudo crear directorio temporal"
+
+#: src/LyX.cpp:859
+#, fuzzy, c-format
+msgid ""
+"Could not create a temporary directory in\n"
+"\"%1$s\"\n"
+"Make sure that this path exists and is writable and try again."
+msgstr ""
+"No se pudo crear un directorio temporal en\n"
+"%1$s. Asegúrese que\n"
+"esa ruta existe y se puede escribir e inténtelo de nuevo."
+
+#: src/LyX.cpp:942
+msgid "Missing user LyX directory"
+msgstr "Falta el directorio LyX del usuario"
+
+#: src/LyX.cpp:943
+#, c-format
+msgid ""
+"You have specified a non-existent user LyX directory, %1$s.\n"
+"It is needed to keep your own configuration."
+msgstr ""
+"Ha especificado un directorio LyX de usuario no existente, %1$s.\n"
+"Es necesario mantener su propia configuración."
+
+#: src/LyX.cpp:948
+msgid "&Create directory"
+msgstr "&Crear directorio"
+
+#: src/LyX.cpp:950
+msgid "No user LyX directory. Exiting."
+msgstr "Sin directorio LyX de usuario. Saliendo."
+
+#: src/LyX.cpp:954
+#, c-format
+msgid "LyX: Creating directory %1$s"
+msgstr "LyX: Creando directorio %1$s"
+
+#: src/LyX.cpp:959
+msgid "Failed to create directory. Exiting."
+msgstr "Error al crear directorio. Saliendo."
+
+#: src/LyX.cpp:1031
+msgid "List of supported debug flags:"
+msgstr "Lista de indicadores de depuración admitidos:"
+
+#: src/LyX.cpp:1035
+#, c-format
+msgid "Setting debug level to %1$s"
+msgstr "Estableciendo nivel de depuración a %1$s"
+
+#: src/LyX.cpp:1046
+#, fuzzy
+msgid ""
+"Usage: lyx [ command line switches ] [ name.lyx ... ]\n"
+"Command line switches (case sensitive):\n"
+"\t-help summarize LyX usage\n"
+"\t-userdir dir set user directory to dir\n"
+"\t-sysdir dir set system directory to dir\n"
+"\t-geometry WxH+X+Y set geometry of the main window\n"
+"\t-dbg feature[,feature]...\n"
+" select the features to debug.\n"
+" Type `lyx -dbg' to see the list of features\n"
+"\t-x [--execute] command\n"
+" where command is a lyx command.\n"
+"\t-e [--export] fmt\n"
+" where fmt is the export format of choice.\n"
+" Look on Tools->Preferences->File formats->Format\n"
+" to get an idea which parameters should be passed.\n"
+"\t-i [--import] fmt file.xxx\n"
+" where fmt is the import format of choice\n"
+" and file.xxx is the file to be imported.\n"
+"\t-version summarize version and build info\n"
+"Check the LyX man page for more details."
+msgstr ""
+"Uso: lyx [ opciones ] [ nombre.lyx ... ]\n"
+"Opciones (distingue mayúsculas):\n"
+"\t-help resumen del uso de LyX\n"
+"\t-userdir dir poner directorio del usuario a dir\n"
+"\t-sysdir dir poner directorio del sistema a dir\n"
+"\t-geometry WxH+X+Y poner geometría de la ventana principal\n"
+"\t-dbg característica[,característica]...\n"
+" seleccionar características a depurar\n"
+"\t-x [--execute] command\n"
+" donde command es un comando de LyX.\n"
+"\t-e [--export] fmt\n"
+" donde fmt es el formato a exportar.\n"
+"\t-e [--export] fmt archivo.xxx\n"
+" donde fmt es el formato a importar\n"
+" y archivo.xxx es el archivo a ser importado.\n"
+" -version resumen de la versión e info. de compilación\n"
+"Lea la página del manual de LyX para más detalles."
+
+#: src/LyX.cpp:1086
+msgid "No system directory"
+msgstr "Sin directorio del sistema"
+
+#: src/LyX.cpp:1087
+msgid "Missing directory for -sysdir switch"
+msgstr "Falta directorio para la opción -sysdir"
+
+#: src/LyX.cpp:1098
+msgid "No user directory"
+msgstr "Sin directorio del usuario"
+
+#: src/LyX.cpp:1099
+msgid "Missing directory for -userdir switch"
+msgstr "Falta directorio para la opción -userdir"
+
+#: src/LyX.cpp:1110
+msgid "Incomplete command"
+msgstr "Comando incompleto"
+
+#: src/LyX.cpp:1111
+msgid "Missing command string after --execute switch"
+msgstr "Falta comando después de la opción --execute"
+
+#: src/LyX.cpp:1122
+msgid "Missing file type [eg latex, ps...] after --export switch"
+msgstr ""
+"Falta tipo de archivo [p. ej. latex, ps...] después de la opción --export"
+
+#: src/LyX.cpp:1135
+msgid "Missing file type [eg latex, ps...] after --import switch"
+msgstr "Falta tipo de archivo [p. ej. latex, ps] después de la opción --import"
+
+#: src/LyX.cpp:1140
+msgid "Missing filename for --import"
+msgstr "Falta nombre de archivo para --import"
+
+#: src/LyXFunc.cpp:113
+msgid "Running configure..."
+msgstr "Ejecutando configurar..."
+
+#: src/LyXFunc.cpp:124
+msgid "Reloading configuration..."
+msgstr "Recargando configuración..."
+
+#: src/LyXFunc.cpp:130
+msgid "System reconfiguration failed"
+msgstr "Falló la reconfiguración del sistema"
+
+#: src/LyXFunc.cpp:131
+msgid ""
+"The system reconfiguration has failed.\n"
+"Default textclass is used but LyX may not be able to work properly.\n"
+"Please reconfigure again if needed."
+msgstr ""
+"La reconfiguración del sistema ha fallado.\n"
+"Se usa la clase de texto predeterminada pero LyX puede que no funcione\n"
+"adecuadamente. Por favor, vuelva a reconfigurarlo si es necesario."
+
+#: src/LyXFunc.cpp:137
+msgid "System reconfigured"
+msgstr "Sistema reconfigurado"
+
+#: src/LyXFunc.cpp:138
+msgid ""
+"The system has been reconfigured.\n"
+"You need to restart LyX to make use of any\n"
+"updated document class specifications."
+msgstr ""
+"El sistema ha sido reconfigurado.\n"
+"Necesita reiniciar LyX para hacer uso de cualquier\n"
+"especificación de clase de documento actualizada."
+
+#: src/LyXFunc.cpp:362
+msgid "Unknown function."
+msgstr "Función desconocida."
+
+#: src/LyXFunc.cpp:391
+msgid "Nothing to do"
+msgstr "Nada que hacer"
+
+#: src/LyXFunc.cpp:410
+msgid "Unknown action"
+msgstr "Acción desconocida"
+
+#: src/LyXFunc.cpp:416 src/LyXFunc.cpp:648
+msgid "Command disabled"
+msgstr "Comando desactivado"
+
+#: src/LyXFunc.cpp:423
+msgid "Command not allowed without any document open"
+msgstr "Comando no permitido sin un documento abierto"
+
+#: src/LyXFunc.cpp:633
+msgid "Document is read-only"
+msgstr "Documento es de sólo-lectura"
+
+#: src/LyXFunc.cpp:642
+msgid "This portion of the document is deleted."
+msgstr "Esta porción del documento está borrada."
+
+#: src/LyXFunc.cpp:661
+#, c-format
+msgid ""
+"The document %1$s has unsaved changes.\n"
+"\n"
+"Do you want to save the document?"
+msgstr ""
+"El documento %1$s contiene cambios sin guardar.\n"
+"\n"
+"¿Desea guardar el documento?"
+
+#: src/LyXFunc.cpp:664 src/frontends/qt4/GuiView.cpp:1706
+msgid "Save changed document?"
+msgstr "¿Guardar documento modificado?"
+
+#: src/LyXFunc.cpp:679
+#, c-format
+msgid ""
+"Could not print the document %1$s.\n"
+"Check that your printer is set up correctly."
+msgstr ""
+"No se pudo imprimir el documento %1$s.\n"
+"Compruebe que su impresora está instalada correctamente."
+
+#: src/LyXFunc.cpp:682
+msgid "Print document failed"
+msgstr "La impresión del documento falló"
+
+#: src/LyXFunc.cpp:799
+#, c-format
+msgid ""
+"Any changes will be lost. Are you sure you want to revert to the saved "
+"version of the document %1$s?"
+msgstr ""
+"Cualquier modificación será perdida. ¿Está seguro de que desea revertir a la "
+"versión guardada del documento %1$s?"
+
+#: src/LyXFunc.cpp:801
+msgid "Revert to saved document?"
+msgstr "¿Revertir al documento guardado?"
+
+#: src/LyXFunc.cpp:802 src/LyXVC.cpp:160
+msgid "&Revert"
+msgstr "&Revertir"
+
+#: src/LyXFunc.cpp:1016 src/Text3.cpp:1481
+msgid "Missing argument"
+msgstr "Falta argumento"
+
+#: src/LyXFunc.cpp:1025
+#, c-format
+msgid "Opening help file %1$s..."
+msgstr "Abriendo archivo de ayuda %1$s..."
+
+#: src/LyXFunc.cpp:1273
+#, c-format
+msgid "Opening child document %1$s..."
+msgstr "Abriendo documento hijo %1$s..."
+
+#: src/LyXFunc.cpp:1452
+#, c-format
+msgid "Document defaults saved in %1$s"
+msgstr "Predeterminados del documento guardados en %1$s"
+
+#: src/LyXFunc.cpp:1455
+msgid "Unable to save document defaults"
+msgstr "No fue posible guardar los valores predeterminados del documento"
+
+#: src/LyXFunc.cpp:1732
+#, fuzzy, c-format
+msgid "Document %1$s reloaded."
+msgstr "Documento %1$s abierto."
+
+#: src/LyXFunc.cpp:1734
+#, fuzzy, c-format
+msgid "Could not reload document %1$s"
+msgstr "No se pudo leer el documento"
+
+#: src/LyXFunc.cpp:1771
+msgid "Welcome to LyX!"
+msgstr "¡Bienvenido a LyX!"
+
+#: src/LyXFunc.cpp:1792
+msgid "Converting document to new document class..."
+msgstr "Convirtiendo documento a nueva clase de documento..."
+
+#: src/LyXRC.cpp:2386
+msgid ""
+"Consider run-together words, such as \"diskdrive\" for \"disk drive\", as "
+"legal words?"
+msgstr ""
+"¿Considerar palabras juntas, como \"autocorrección\" por \"auto corrección\" "
+"como palabras correctas?"
+
+#: src/LyXRC.cpp:2391
+msgid ""
+"Specify an alternate language. The default is to use the language of the "
+"document."
+msgstr ""
+"Especificar un idioma alternativo. El valor predeterminado es usar el idioma "
+"del documento."
+
+#: src/LyXRC.cpp:2395
+msgid ""
+"Use to define an external program to render tables in plain text output. E."
+"g. \"groff -t -Tlatin1 $$FName\" where $$FName is the input file. If \"\" is "
+"specified, an internal routine is used."
+msgstr ""
+"Usar para definir un programa externo para que dibuje las tablas en la "
+"salida de texto simple. P. ej. \"groff -t -Tlatin1 $$FName\" donde $$FName "
+"es el archivo de entrada. Si se especifica \"\", se usa una rutina interna."
+
+#: src/LyXRC.cpp:2403
+msgid ""
+"De-select if you don't want the current selection to be replaced "
+"automatically by what you type."
+msgstr ""
+"Deseleccionar si no quiere que la selección actual sea reemplazada "
+"automáticamente por lo que escriba."
+
+#: src/LyXRC.cpp:2407
+msgid ""
+"De-select if you don't want the class options to be reset to defaults after "
+"class change."
+msgstr ""
+"Deseleccionar si no quiere que las opciones de clase sean reiniciadas a los "
+"valores predeterminados después de un cambio de clase."
+
+#: src/LyXRC.cpp:2411
+msgid ""
+"The time interval between auto-saves (in seconds). 0 means no auto-save."
+msgstr ""
+"Intervalo temporal entre autoguardados (en segundos). 0 significa no "
+"autoguardado."
+
+#: src/LyXRC.cpp:2418
+msgid ""
+"The path for storing backup files. If it is an empty string, LyX will store "
+"the backup file in the same directory as the original file."
+msgstr ""
+"Ruta para almacenar copias de seguridad. Si es una cadena vacía, LyX "
+"almacenará las copias de seguridad en el mismo directorio que el del archivo "
+"original."
+
+#: src/LyXRC.cpp:2422
+msgid ""
+"Define the options of bibtex (cf. man bibtex) or select an alternative "
+"compiler (e.g. mlbibtex or bibulus)."
+msgstr ""
+"Definir las opciones de bibtex (cf. man bibtex) o seleccionar un compilador "
+"alternativo (ej. mlbibtex o bibulus)."
+
+#: src/LyXRC.cpp:2426
+msgid ""
+"Keybindings file. Can either specify an absolute path, or LyX will look in "
+"its global and local bind/ directories."
+msgstr ""
+"Archivo de enlaces de teclas. Puede especificar bien una ruta absoluta, o "
+"bien LyX buscará en sus directorios bind/ globales y locales."
+
+#: src/LyXRC.cpp:2430
+msgid "Select to check whether the lastfiles still exist."
+msgstr "Seleccionar para comprobar si los archivos recientes todavía existen."
+
+#: src/LyXRC.cpp:2434
+msgid ""
+"Define how to run chktex. E.g. \"chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -n30 -"
+"n38\" Refer to the ChkTeX documentation."
+msgstr ""
+"Definir como ejecutar chktex. P. ej. \"chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -"
+"n30 -n38\". Vea la documentación de ChkTeX."
+
+#: src/LyXRC.cpp:2444
+msgid ""
+"LyX normally doesn't update the cursor position if you move the scrollbar. "
+"Set to true if you'd prefer to always have the cursor on screen."
+msgstr ""
+"LyX normalmente no actualiza la posición del cursor si mueve la barra de "
+"desplazamiento. Activar si prefiere tener siempre el cursor en la pantalla."
+
+#: src/LyXRC.cpp:2448
+msgid ""
+"Show a small box around a Math Macro with the macro name when the cursor is "
+"inside."
+msgstr ""
+
+#: src/LyXRC.cpp:2459
+#, no-c-format
+msgid ""
+"This accepts the normal strftime formats; see man strftime for full details. "
+"E.g.\"%A, %e. %B %Y\"."
+msgstr ""
+"Esto acepta los formatos strftime normales; ver man strftime para más "
+"detalles. P. ej.\"%A, %e. %B %Y\"."
+
+#: src/LyXRC.cpp:2463
+#, fuzzy
+msgid ""
+"Command definition file. Can either specify an absolute path, or LyX will "
+"look in its global and local commands/ directories."
+msgstr ""
+"Archivo de enlaces de teclas. Puede especificar bien una ruta absoluta, o "
+"bien LyX buscará en sus directorios bind/ globales y locales."
+
+#: src/LyXRC.cpp:2467
+msgid "New documents will be assigned this language."
+msgstr "Los documentos nuevos serán asignados a este idioma."
+
+#: src/LyXRC.cpp:2471
+msgid "Specify the default paper size."
+msgstr "Especificar el tamaño predeterminado del papel."
+
+#: src/LyXRC.cpp:2475
+msgid ""
+"Iconify the dialogs when the main window is iconified. (Affects only dialogs "
+"shown after the change has been made.)"
+msgstr ""
+"Iconificar los diálogos cuando la ventana principal es iconificada. (Afecta "
+"solo a diálogos mostrados después de que el cambio haya sido hecho)."
+
+#: src/LyXRC.cpp:2479
+msgid "Select how LyX will display any graphics."
+msgstr "Seleccionar cómo mostrará LyX los gráficos."
+
+#: src/LyXRC.cpp:2483
+msgid ""
+"The default path for your documents. An empty value selects the directory "
+"LyX was started from."
+msgstr ""
+"Ruta predeterminada para sus documentos. Un valor vacío selecciona el "
+"directorio en el que LyX se inició."
+
+#: src/LyXRC.cpp:2488
+msgid "Specify additional chars that can be part of a word."
+msgstr ""
+"Especificar caracteres adicionales que pueden ser parte de una palabra."
+
+#: src/LyXRC.cpp:2492
+#, fuzzy
+msgid ""
+"The path that LyX will set when offering to choose an example. An empty "
+"value selects the directory LyX was started from."
+msgstr ""
+"Ruta que LyX pondrá cuando ofrezca elegir una plantilla. Un valor vacío "
+"selecciona el directorio el en que LyX se inició."
+
+#: src/LyXRC.cpp:2496
+msgid ""
+"The font encoding used for the LaTeX2e fontenc package. T1 is highly "
+"recommended for non-English languages."
+msgstr ""
+"Codificación de fuentes usada por el paquete LaTeX2e fontenc. T1 es "
+"altamente recomendado para idiomas no ingleses."
+
+#: src/LyXRC.cpp:2503
+msgid ""
+"Define the options of makeindex (cf. man makeindex) or select an alternative "
+"compiler. E.g., using xindy/make-rules, the command string would be "
+"\"makeindex.sh -m $$lang\"."
+msgstr ""
+"Definir las opciones de makeindex (cf. man makeindex) o seleccionar un "
+"compilador alternativo. Ej., usando xindy/make-rules, la cadena del comando "
+"sería \"makeindex.sh -m $$lang\"."
+
+#: src/LyXRC.cpp:2512
+msgid ""
+"Use this to set the correct mapping file for your keyboard. You'll need this "
+"if you for instance want to type German documents on an American keyboard."
+msgstr ""
+"Usar esto para poner el archivo de mapas del teclado correcto. Necesitará "
+"esto si por ejemplo quiere escribir en alemán con un teclado americano."
+
+#: src/LyXRC.cpp:2516
+msgid "Maximum number of words in the initialization string for a new label"
+msgstr ""
+"Número máximo de palabras en la cadena de inicialización de una nueva "
+"etiqueta"
+
+#: src/LyXRC.cpp:2520
+msgid ""
+"Select if a language switching command is needed at the beginning of the "
+"document."
+msgstr ""
+"Seleccionar si un comando de cambio de idioma se necesita al principio del "
+"documento."
+
+#: src/LyXRC.cpp:2524
+msgid ""
+"Select if a language switching command is needed at the end of the document."
+msgstr ""
+"Seleccionar si un comando de cambio de idioma se necesita al final del "
+"documento."
+
+#: src/LyXRC.cpp:2528
+msgid ""
+"The LaTeX command for changing from the language of the document to another "
+"language. E.g. \\selectlanguage{$$lang} where $$lang is substituted by the "
+"name of the second language."
+msgstr ""
+"Comando LaTeX para cambiar de un idioma del documento a otro idioma. P. ej. "
+"\\selectlanguage{$$lang} donde $$lang es sustituido por el nombre del "
+"segundo idioma."
+
+#: src/LyXRC.cpp:2532
+msgid "The LaTeX command for changing back to the language of the document."
+msgstr "Comando LaTeX para volver a cambiar al idioma del documento."
+
+#: src/LyXRC.cpp:2536
+msgid "The LaTeX command for local changing of the language."
+msgstr "Comando LaTeX para un cambio local del idioma."
+
+#: src/LyXRC.cpp:2540
+msgid ""
+"De-select if you don't want the language(s) used as an argument to "
+"\\documentclass."
+msgstr ""
+"Deseleccionar si no quiere el idioma(s) usado(s) como argumento a "
+"\\documentclass."
+
+#: src/LyXRC.cpp:2544
+msgid ""
+"The LaTeX command for loading the language package. E.g. \"\\usepackage"
+"{babel}\", \"\\usepackage{omega}\"."
+msgstr ""
+"Comando LaTex para cargar el paquete del idioma. P. ej. \"\\usepackage{babel}"
+"\", \"\\usepackage{omega}\"."
+
+#: src/LyXRC.cpp:2548
+msgid ""
+"De-select if you don't want babel to be used when the language of the "
+"document is the default language."
+msgstr ""
+"Deseleccionar si no quiere que babel sea usado cuando el idioma del "
+"documento es el idioma predeterminado."
+
+#: src/LyXRC.cpp:2552
+msgid "De-select if you do not want LyX to scroll to saved position."
+msgstr "Deseleccionar si no se quiere que LyX avance a la posición guardada."
+
+#: src/LyXRC.cpp:2556
+msgid "De-select to prevent loading files opened from the last LyX session."
+msgstr ""
+"De-seleccionar para prevenir cargar archivos abiertos de la última sesión de "
+"LyX."
+
+#: src/LyXRC.cpp:2560
+msgid "De-select if you don't want LyX to create backup files."
+msgstr "Deseleccionar si no quiere que LyX cree copias de seguridad."
+
+#: src/LyXRC.cpp:2564
+msgid ""
+"Select to control the highlighting of words with a language foreign to that "
+"of the document."
+msgstr ""
+"Seleccionar para controlar el resaltado de parabras con un idioma extranjero "
+"al del documento."
+
+#: src/LyXRC.cpp:2568
+msgid "The scrolling speed of the mouse wheel."
+msgstr ""
+
+#: src/LyXRC.cpp:2573
+#, fuzzy
+msgid "The completion popup delay."
+msgstr "&Listado insertado"
+
+#: src/LyXRC.cpp:2577
+msgid "Select to display the completion popup in math mode."
+msgstr ""
+
+#: src/LyXRC.cpp:2581
+msgid "Select to display the completion popup in text mode."
+msgstr ""
+
+#: src/LyXRC.cpp:2585
+msgid ""
+"Show the completion popup without delay after non-unique completion attempt."
+msgstr ""
+
+#: src/LyXRC.cpp:2589
+msgid ""
+"Show a small triangle on the cursor to indicate that a completion is "
+"available."
+msgstr ""
+
+#: src/LyXRC.cpp:2593
+#, fuzzy
+msgid "The inline completion delay."
+msgstr "&Listado insertado"
+
+#: src/LyXRC.cpp:2597
+msgid "Select to display the inline completion in math mode."
+msgstr ""
+
+#: src/LyXRC.cpp:2601
+msgid "Select to display the inline completion in text mode."
+msgstr ""
+
+#: src/LyXRC.cpp:2605
+msgid "Use \"...\" to shorten long completions."
+msgstr ""
+
+#: src/LyXRC.cpp:2609
+#, c-format
+msgid "Maximal number of lastfiles. Up to %1$d can appear in the file menu."
+msgstr ""
+"Número máximo de archivos recientes. Hasta %1$d pueden aparecer en el menú "
+"archivo."
+
+#: src/LyXRC.cpp:2614
+msgid ""
+"Specify those directories which should be prepended to the PATH environment "
+"variable. Use the OS native format."
+msgstr ""
+"Especifique aquellos directorios que deberían ser añadidos a la variable de "
+"entorno PATH. Use el formato nativo del OS."
+
+#: src/LyXRC.cpp:2621
+msgid ""
+"Specify an alternate personal dictionary file. E.g. \".ispell_english\"."
+msgstr ""
+"Especificar diccionario personal alternativo. P. ej. \".ispell_english\"."
+
+#: src/LyXRC.cpp:2625
+msgid "Shows a typeset preview of things such as math"
+msgstr "Muestra una vista preliminar de cosas como ecuaciones"
+
+#: src/LyXRC.cpp:2629
+msgid "Previewed equations will have \"(#)\" labels rather than numbered ones"
+msgstr ""
+"La vista preliminar de las ecuaciones tendrá la etiqueta \"(#)\" en vez de "
+"las numeradas"
+
+#: src/LyXRC.cpp:2633
+msgid "Scale the preview size to suit."
+msgstr "Redimensionar vista preliminar para que encaje."
+
+#: src/LyXRC.cpp:2637
+msgid "The option for specifying whether the copies should be collated."
+msgstr "Opción para especificar si las copias deberían ser cotejadas."
+
+#: src/LyXRC.cpp:2641
+msgid "The option for specifying the number of copies to print."
+msgstr "Opción para especificar el número de copias para imprimir."
+
+#: src/LyXRC.cpp:2645
+msgid ""
+"The default printer to print on. If none is specified, LyX will use the "
+"environment variable PRINTER."
+msgstr ""
+"Impresora predeterminada. Si no se especifica ninguna, LyX usará la variable "
+"de entorno PRINTER."
+
+#: src/LyXRC.cpp:2649
+msgid "The option to print only even pages."
+msgstr "Opción para imprimir solo páginas pares."
+
+#: src/LyXRC.cpp:2653
+msgid ""
+"Extra options to pass to printing program after everything else, but before "
+"the filename of the DVI file to be printed."
+msgstr ""
+"Opciones extra para pasar al programa de impresión después de todas las "
+"demás, pero antes del nombre del archivo DVI que se imprima."
+
+#: src/LyXRC.cpp:2657
+msgid "Extension of printer program output file. Usually \".ps\"."
+msgstr ""
+"Extensión del archivo de salida del programa de impresión. Normalmente \".ps"
+"\"."
+
+#: src/LyXRC.cpp:2661
+msgid "The option to print out in landscape."
+msgstr "Opción para imprimir de forma apaisada."
+
+#: src/LyXRC.cpp:2665
+msgid "The option to print only odd pages."
+msgstr "Opción para imprimir solo páginas impares."
+
+#: src/LyXRC.cpp:2669
+msgid "The option for specifying a comma-separated list of pages to print."
+msgstr ""
+"Opción para especificar una lista separada por comas de páginas a imprimir."
+
+#: src/LyXRC.cpp:2673
+msgid "Option to specify the dimensions of the print paper."
+msgstr "Opción para especificar las dimensiones del papel de impresión."
+
+#: src/LyXRC.cpp:2677
+msgid "The option to specify paper type."
+msgstr "Opción para especificar el tipo del papel."
+
+#: src/LyXRC.cpp:2681
+msgid "The option to reverse the order of the pages printed."
+msgstr "Opción para invertir el orden de impresión."
+
+#: src/LyXRC.cpp:2685
+msgid ""
+"When set, this printer option automatically prints to a file and then calls "
+"a separate print spooling program on that file with the given name and "
+"arguments."
+msgstr ""
+"Cuando esté activada, esta opción de impresora automáticamente imprime en un "
+"archivo y después llama a una cola de impresión separada en ese archivo con "
+"el nombre y argumentos dados."
+
+#: src/LyXRC.cpp:2689
+msgid ""
+"If you specify a printer name in the print dialog, the following argument is "
+"prepended along with the printer name after the spool command."
+msgstr ""
+"Si especificó un nombre de impresora en el diálogo imprimir, el siguiente "
+"argumento es añadido con el nombre de la impresora después del comando de "
+"cola."
+
+#: src/LyXRC.cpp:2693
+msgid "Option to pass to the print program to print to a file."
+msgstr "Opción para pasar al programa de impresión que imprima en un archivo."
+
+#: src/LyXRC.cpp:2697
+msgid "Option to pass to the print program to print on a specific printer."
+msgstr ""
+"Opción para pasar al programa de impresión que imprima en una impresora "
+"específica."
+
+#: src/LyXRC.cpp:2701
+msgid ""
+"Select for LyX to pass the name of the destination printer to your print "
+"command."
+msgstr ""
+"Seleccionar para que LyX pase el nombre de la impresora destino a su comando "
+"de impresión."
+
+#: src/LyXRC.cpp:2705
+msgid "Your favorite print program, e.g. \"dvips\", \"dvilj4\"."
+msgstr "Programa favorito de impresión, p. ej. \"dvips\", \"dvilj4\"."
+
+#: src/LyXRC.cpp:2713
+msgid ""
+"Select to have visual bidi cursor movement, unselect for logical movement."
+msgstr ""
+
+#: src/LyXRC.cpp:2717
+msgid ""
+"DPI (dots per inch) of your monitor is auto-detected by LyX. If that goes "
+"wrong, override the setting here."
+msgstr ""
+"DPI (puntos por pulgada) de su monitor son autodetectados por LyX. Si no "
+"funciona, sobreescriba su valor aquí."
+
+#: src/LyXRC.cpp:2723
+msgid "The screen fonts used to display the text while editing."
+msgstr "Fuentes de pantalla usadas para mostrar el texto mientras se edita."
+
+#: src/LyXRC.cpp:2732
+msgid ""
+"Allow bitmap fonts to be resized. If you are using a bitmap font, selecting "
+"this option may make some fonts look blocky in LyX. Deselecting this option "
+"makes LyX use the nearest bitmap font size available, instead of scaling."
+msgstr ""
+"Permitir redimensionar fuentes bitmap. Si está usando una fuente bitmap, "
+"seleccionando esta opción puede hacer que algunas fuentes aparezcan con "
+"bloques en LyX. Deseleccionando esta opción hace que LyX use la fuente "
+"bitmap disponible de tamaño más cercano, en vez de redimensionarlas."
+
+#: src/LyXRC.cpp:2736
+msgid "The font sizes used for calculating the scaling of the screen fonts."
+msgstr ""
+"Tamaños de fuentes usados para calcular la escala de las fuentes de pantalla."
+
+#: src/LyXRC.cpp:2741
+#, no-c-format
+msgid ""
+"The zoom percentage for screen fonts. A setting of 100% will make the fonts "
+"roughly the same size as on paper."
+msgstr ""
+"Porcentaje de zoom para fuentes en pantalla. Un valor de 100% hará las "
+"fuentes aproximadamente del mismo tamaño que en el papel."
+
+#: src/LyXRC.cpp:2745
+#, fuzzy
+msgid "Allow session manager to save and restore windows geometry."
+msgstr ""
+"Permitir al administrador de sesión guardar y restaurar la posición de las "
+"ventanas."
+
+#: src/LyXRC.cpp:2749
+msgid ""
+"This starts the lyxserver. The pipes get an additional extension \".in\" and "
+"\".out\". Only for advanced users."
+msgstr ""
+"Esto inicia el lyxserver. Las tuberías obtienen una extensión adicional \".in"
+"\" y \".out\". Solo para usuarios avanzados."
+
+#: src/LyXRC.cpp:2756
+msgid "De-select if you don't want the startup banner."
+msgstr "Deseleccionar si no quiere la pantalla de inicio."
+
+#: src/LyXRC.cpp:2760
+msgid "What command runs the spellchecker?"
+msgstr "¿Qué comando ejecuta el corrector ortográfico?"
+
+#: src/LyXRC.cpp:2764
+msgid ""
+"LyX will place its temporary directories in this path. They will be deleted "
+"when you quit LyX."
+msgstr ""
+"LyX colocará sus directorios temporales en esta ruta. Serán eliminados "
+"cuando salga de LyX."
+
+#: src/LyXRC.cpp:2768
+msgid ""
+"The path that LyX will set when offering to choose a template. An empty "
+"value selects the directory LyX was started from."
+msgstr ""
+"Ruta que LyX pondrá cuando ofrezca elegir una plantilla. Un valor vacío "
+"selecciona el directorio el en que LyX se inició."
+
+#: src/LyXRC.cpp:2778
+msgid ""
+"The UI (user interface) file. Can either specify an absolute path, or LyX "
+"will look in its global and local ui/ directories."
+msgstr ""
+"Archivo de interfaz de usuario (UI). Puede especificar bien una ruta "
+"absoluta, o bien LyX buscará en sus directorios ui/ globales y locales."
+
+#: src/LyXRC.cpp:2791
+msgid ""
+"Specify whether to pass the -T input encoding option to ispell. Enable this "
+"if you cannot check the spelling of words containing accented letters. This "
+"may not work with all dictionaries."
+msgstr ""
+"Especificar si pasar la opción de codificación de entrada -T a ispell. "
+"Activar esto si no puede comprobar la ortografía de las palabras que "
+"contienen tildes. Esto puede que no funcione con todos los diccionarios."
+
+#: src/LyXRC.cpp:2795
+msgid "Enable the automatic appearance of tool tips in the work area."
+msgstr ""
+
+#: src/LyXRC.cpp:2799
+msgid ""
+"Enable the pixmap cache that might improve performance on Mac and Windows."
+msgstr ""
+"Activar el caché de pixmaps que podría mejorar el rendimiento en Mac y "
+"Windows."
+
+#: src/LyXRC.cpp:2806
+msgid "Specify the paper command to DVI viewer (leave empty or use \"-paper\")"
+msgstr ""
+"Especificar el comando del papel del visor DVI (dejar vacío o usar \"-paper"
+"\")"
+
+#: src/LyXVC.cpp:91
+msgid "Document not saved"
+msgstr "Documento no guardado"
+
+#: src/LyXVC.cpp:92
+msgid "You must save the document before it can be registered."
+msgstr "Debe guardar el documento antes de que pueda ser registrado."
+
+#: src/LyXVC.cpp:117
+msgid "LyX VC: Initial description"
+msgstr "LyX CV: Descripción inicial"
+
+#: src/LyXVC.cpp:118
+msgid "(no initial description)"
+msgstr "(sin descripción inicial)"
+
+#: src/LyXVC.cpp:133
+msgid "LyX VC: Log Message"
+msgstr "LyX CV: Mensaje de registro"
+
+#: src/LyXVC.cpp:136
+msgid "(no log message)"
+msgstr "(sin mensaje de registro)"
+
+#: src/LyXVC.cpp:156
+#, c-format
+msgid ""
+"Reverting to the stored version of the document %1$s will lose all current "
+"changes.\n"
+"\n"
+"Do you want to revert to the saved version?"
+msgstr ""
+"Revertiendo a la versión almacenada del documento %1$s perderá todos los "
+"cambios actuales.\n"
+"\n"
+"¿Desea revertir a la versión guardada?"
+
+#: src/LyXVC.cpp:159
+msgid "Revert to stored version of document?"
+msgstr "¿Revertir a la versión guardada del documento?"
+
+#: src/Paragraph.cpp:1509 src/frontends/qt4/GuiParagraph.cpp:246
+msgid "Senseless with this layout!"
+msgstr "¡No tiene sentido con este estilo!"
+
+#: src/Paragraph.cpp:1575
+msgid "Alignment not permitted"
+msgstr "Alineación no permitida"
+
+#: src/Paragraph.cpp:1576
+msgid ""
+"The new layout does not permit the alignment previously used.\n"
+"Setting to default."
+msgstr ""
+"El nuevo diseño no permite la alineación usada previamente.\n"
+"Poniendo la predeterminada."
+
+#: src/Paragraph.cpp:2044 src/frontends/qt4/LaTeXHighlighter.cpp:108
+#: src/mathed/InsetMathString.cpp:164
+#, fuzzy
+msgid "LyX Warning: "
+msgstr "Versión LyX "
+
+#: src/Paragraph.cpp:2045 src/mathed/InsetMathString.cpp:165
+#, fuzzy
+msgid "uncodable character"
+msgstr "carácter especial"
+
+#: src/SpellBase.cpp:51
+msgid "Native OS API not yet supported."
+msgstr "API nativa del OS todavía no implementada."
+
+#: src/Text.cpp:121
+msgid "Unknown layout"
+msgstr "Formato desconocido"
+
+#: src/Text.cpp:122
+#, c-format
+msgid ""
+"Layout '%1$s' does not exist in textclass '%2$s'\n"
+"Trying to use the default instead.\n"
+msgstr ""
+"El formato '%1$s' no existe en la clase de texto '%2$s'.\n"
+"Intentando usar el predeterminado en su lugar.\n"
+
+#: src/Text.cpp:151
+msgid "Unknown Inset"
+msgstr "Recuadro desconocido"
+
+#: src/Text.cpp:224 src/Text.cpp:237
+msgid "Change tracking error"
+msgstr "Cambiar error seguido"
+
+#: src/Text.cpp:225
+#, c-format
+msgid "Unknown author index for insertion: %1$d\n"
+msgstr "Índice de autor desconocido para la inserción: %1$d\n"
+
+#: src/Text.cpp:238
+#, c-format
+msgid "Unknown author index for deletion: %1$d\n"
+msgstr "Índice de autor desconocido para la eliminación: %1$d\n"
+
+#: src/Text.cpp:245
+msgid "Unknown token"
+msgstr "Símbolo desconocido"
+
+#: src/Text.cpp:527
+msgid ""
+"You cannot insert a space at the beginning of a paragraph. Please read the "
+"Tutorial."
+msgstr ""
+"No puede insertar un espacio al principio de un párrafo. Por favor lea el "
+"Tutorial."
+
+#: src/Text.cpp:538
+msgid "You cannot type two spaces this way. Please read the Tutorial."
+msgstr ""
+"No se puede introducir dos espacios de esa manera. Por favor lea el Tutorial."
+
+#: src/Text.cpp:1302
+msgid "[Change Tracking] "
+msgstr "[Cambiar seguimiento] "
+
+#: src/Text.cpp:1308
+msgid "Change: "
+msgstr "Cambio: "
+
+#: src/Text.cpp:1312
+msgid " at "
+msgstr " en "
+
+#: src/Text.cpp:1322
+#, c-format
+msgid "Font: %1$s"
+msgstr "Fuente: %1$s"
+
+#: src/Text.cpp:1327
+#, c-format
+msgid ", Depth: %1$d"
+msgstr ", Profundidad: %1$d"
+
+#: src/Text.cpp:1333
+msgid ", Spacing: "
+msgstr ", Espaciado: "
+
+#: src/Text.cpp:1339 src/frontends/qt4/GuiDocument.cpp:581
+msgid "OneHalf"
+msgstr "Uno y medio"
+
+#: src/Text.cpp:1345
+msgid "Other ("
+msgstr "Otro ("
+
+#: src/Text.cpp:1354
+msgid ", Inset: "
+msgstr ", recuadro: "
+
+#: src/Text.cpp:1355
+msgid ", Paragraph: "
+msgstr ", Párrafo: "
+
+#: src/Text.cpp:1356
+msgid ", Id: "
+msgstr ", Id: "
+
+#: src/Text.cpp:1357
+msgid ", Position: "
+msgstr ", posición: "
+
+#: src/Text.cpp:1363
+msgid ", Char: 0x"
+msgstr ", carácter: 0x"
+
+#: src/Text.cpp:1365
+msgid ", Boundary: "
+msgstr ", frontera: "
+
+#: src/Text2.cpp:391
+msgid "No font change defined."
+msgstr "Ningún cambio de fuente definido."
+
+#: src/Text2.cpp:431
+msgid "Nothing to index!"
+msgstr "¡Nada que indexar!"
+
+#: src/Text2.cpp:433
+msgid "Cannot index more than one paragraph!"
+msgstr "¡No se puede indexar más de un párrafo!"
+
+#: src/Text3.cpp:173 src/mathed/InsetMathHull.cpp:1456
+msgid "Math editor mode"
+msgstr "Modo del editor de ecuaciones"
+
+#: src/Text3.cpp:792
+msgid "Unknown spacing argument: "
+msgstr "Argumento de espaciado desconocido: "
+
+#: src/Text3.cpp:1033
+msgid "Layout "
+msgstr "Estilo "
+
+#: src/Text3.cpp:1034
+msgid " not known"
+msgstr " no conocido"
+
+#: src/Text3.cpp:1588 src/Text3.cpp:1600
+msgid "Character set"
+msgstr "Conjunto de caracteres"
+
+#: src/Text3.cpp:1746 src/Text3.cpp:1757
+msgid "Paragraph layout set"
+msgstr "Estilo de párrafo"
+
+#: src/TextClass.cpp:140
+#, fuzzy
+msgid "Plain Layout"
+msgstr "Diseño de página"
+
+#: src/TextClass.cpp:594
+#, fuzzy
+msgid "Missing File"
+msgstr "Falta argumento"
+
+#: src/TextClass.cpp:595
+msgid "Could not find stdinsets.inc! This may lead to data loss!"
+msgstr ""
+
+#: src/TextClass.cpp:598
+#, fuzzy
+msgid "Corrupt File"
+msgstr "Título breve"
+
+#: src/TextClass.cpp:599
+msgid "Could not read stdinsets.inc! This may lead to data loss!"
+msgstr ""
+
+#: src/Thesaurus.cpp:60
+msgid "Thesaurus failure"
+msgstr "Fallo del tesauro"
+
+#: src/Thesaurus.cpp:61
+#, c-format
+msgid ""
+"Aiksaurus returned the following error:\n"
+"\n"
+"%1$s."
+msgstr ""
+"Aiksaurus devolvió el siguiente error:\n"
+"\n"
+"%1$s."
+
+#: src/VSpace.cpp:472
+msgid "Default skip"
+msgstr "Salto predeterminado"
+
+#: src/VSpace.cpp:475
+msgid "Small skip"
+msgstr "Salto pequeño"
+
+#: src/VSpace.cpp:478
+msgid "Medium skip"
+msgstr "Salto medio"
+
+#: src/VSpace.cpp:481
+msgid "Big skip"
+msgstr "Salto grande"
+
+#: src/VSpace.cpp:484
+msgid "Vertical fill"
+msgstr "Relleno vertical"
+
+#: src/VSpace.cpp:491
+msgid "protected"
+msgstr "protegido"
+
+#: src/buffer_funcs.cpp:69
+#, fuzzy, c-format
+msgid ""
+"The document %1$s is already loaded and has unsaved changes.\n"
+"Do you want to abandon your changes and reload the version on disk?"
+msgstr ""
+"El documento %1$s ya ha sido cargado.\n"
+"\n"
+"¿Desea revertir a la versión guardada?"
+
+#: src/buffer_funcs.cpp:71
+#, fuzzy
+msgid "Reload saved document?"
+msgstr "¿Revertir al documento guardado?"
+
+#: src/buffer_funcs.cpp:72
+#, fuzzy
+msgid "&Reload"
+msgstr "&Reemplazar"
+
+#: src/buffer_funcs.cpp:72
+#, fuzzy
+msgid "&Keep Changes"
+msgstr "Fusionar cambios"
+
+#: src/buffer_funcs.cpp:83
+#, c-format
+msgid "The file %1$s exists but is not readable by the current user."
+msgstr ""
+
+#: src/buffer_funcs.cpp:86
+#, fuzzy
+msgid "File not readable!"
+msgstr "No se pudo leer archivo"
+
+#: src/buffer_funcs.cpp:100
+#, c-format
+msgid ""
+"The document %1$s does not yet exist.\n"
+"\n"
+"Do you want to create a new document?"
+msgstr ""
+"El documento %1$s ya no existe.\n"
+"\n"
+"¿Desea crear un nuevo documento?"
+
+#: src/buffer_funcs.cpp:103
+msgid "Create new document?"
+msgstr "¿Crear un documento nuevo?"
+
+#: src/buffer_funcs.cpp:104
+msgid "&Create"
+msgstr "&Crear"
+
+#: src/buffer_funcs.cpp:132
+#, c-format
+msgid ""
+"The specified document template\n"
+"%1$s\n"
+"could not be read."
+msgstr ""
+"La plantilla de documento especificada\n"
+"%1$s\n"
+"no pudo ser leída."
+
+#: src/buffer_funcs.cpp:134
+msgid "Could not read template"
+msgstr "No se pudo leer plantilla"
+
+#: src/buffer_funcs.cpp:387
+msgid "\\arabic{enumi}."
+msgstr "\\arabic{enumi}."
+
+#: src/buffer_funcs.cpp:393
+msgid "\\roman{enumiii}."
+msgstr "\\roman{enumiii}."
+
+#: src/buffer_funcs.cpp:396
+msgid "\\Alph{enumiv}."
+msgstr "\\Alph{enumiv}."
+
+#: src/buffer_funcs.cpp:413 src/insets/InsetCaption.cpp:293
+msgid "Senseless!!! "
+msgstr "¡Sin sentido! "
+
+#: src/frontends/qt4/BulletsModule.cpp:40
+msgid "Standard[[Bullets]]"
+msgstr "Normal[[Marcas]]"
+
+#: src/frontends/qt4/BulletsModule.cpp:41
+msgid "Maths"
+msgstr "Ecuaciones"
+
+#: src/frontends/qt4/BulletsModule.cpp:42
+msgid "Dings 1"
+msgstr "Dings 1"
+
+#: src/frontends/qt4/BulletsModule.cpp:43
+msgid "Dings 2"
+msgstr "Dings 2"
+
+#: src/frontends/qt4/BulletsModule.cpp:44
+msgid "Dings 3"
+msgstr "Dings 3"
+
+#: src/frontends/qt4/BulletsModule.cpp:45
+msgid "Dings 4"
+msgstr "Dings 4"
+
+#: src/frontends/qt4/FileDialog.cpp:168
+msgid "Directories"
+msgstr "Directorios"
+
+#: src/frontends/qt4/GuiAbout.cpp:38
+msgid "ERROR: LyX wasn't able to read CREDITS file\n"
+msgstr "ERROR: LyX no pudo leer el archivo CREDITS\n"
+
+#: src/frontends/qt4/GuiAbout.cpp:39
+msgid "Please install correctly to estimate the great\n"
+msgstr "Por favor instalar correctamente para apreciar la gran\n"
+
+#: src/frontends/qt4/GuiAbout.cpp:40
+msgid "amount of work other people have done for the LyX project."
+msgstr "cantidad de trabajo que otra gente ha hecho por el proyecto LyX."
+
+#: src/frontends/qt4/GuiAbout.cpp:63
+#, fuzzy
+msgid ""
+"LyX is Copyright (C) 1995 by Matthias Ettrich,\n"
+"1995-2008 LyX Team"
+msgstr ""
+"LyX es Copyright (C) 1995 por Matthias Ettrich,\n"
+"1995-2006 Equipo LyX"
+
+#: src/frontends/qt4/GuiAbout.cpp:69
+msgid ""
+"This program is free software; you can redistribute it and/or modify it "
+"under the terms of the GNU General Public License as published by the Free "
+"Software Foundation; either version 2 of the License, or (at your option) "
+"any later version."
+msgstr ""
+"Este programa es software libre, puede redistribuirlo y/o modificarlo bajo "
+"los términos de la Licencia Pública General GNU como está publicado por la "
+"Fundación del Software Libre; bien por la versión 2 de la Licencia, o (a su "
+"elección) cualquier versión posterior."
+
+#: src/frontends/qt4/GuiAbout.cpp:75
+msgid ""
+"LyX is distributed in the hope that it will be useful, but WITHOUT ANY "
+"WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS "
+"FOR A PARTICULAR PURPOSE.\n"
+"See the GNU General Public License for more details.\n"
+"You should have received a copy of the GNU General Public License along with "
+"this program; if not, write to the Free Software Foundation, Inc., 51 "
+"Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA."
+msgstr ""
+"LyX es distribuido con la esperanza de que sea útil, pero SIN NINGUNA "
+"GARANTÍA; incluso sin la garantía implícita de MERCANTILISMO o ADECUACIÓN A "
+"UN PROPÓSITO PARTICULAR.\n"
+"Vea la Licencia Pública General GNU para más detalles.\n"
+"Debería haber recibido una copia de la Licencia Pública General GNU con este "
+"programa; si no, escriba a Free Software Foundation, Inc., 51 Franklin "
+"Street, Fifth Floor, Boston, MA 02110-1301, USA."
+
+#: src/frontends/qt4/GuiAbout.cpp:83
+msgid "LyX Version "
+msgstr "Versión LyX "
+
+#: src/frontends/qt4/GuiAbout.cpp:88
+msgid "Library directory: "
+msgstr "Directorio de bibliotecas: "
+
+#: src/frontends/qt4/GuiAbout.cpp:91
+msgid "User directory: "
+msgstr "Directorio del usuario: "
+
+#: src/frontends/qt4/GuiAlert.cpp:124 src/frontends/qt4/GuiAlert.cpp:157
+#: src/frontends/qt4/GuiAlert.cpp:183 src/frontends/qt4/GuiAlert.cpp:209
+#: src/frontends/qt4/GuiAlert.cpp:230
+#, c-format
+msgid "LyX: %1$s"
+msgstr "LyX: %1$s"
+
+#: src/frontends/qt4/GuiApplication.cpp:385
+msgid "About %1"
+msgstr "Acerca de %1"
+
+#: src/frontends/qt4/GuiApplication.cpp:385
+#: src/frontends/qt4/GuiPrefs.cpp:2437
+msgid "Preferences"
+msgstr "Preferencias"
+
+#: src/frontends/qt4/GuiApplication.cpp:386
+msgid "Reconfigure"
+msgstr "Reconfigurar"
+
+#: src/frontends/qt4/GuiApplication.cpp:386
+msgid "Quit %1"
+msgstr "Salir de %1"
+
+#: src/frontends/qt4/GuiApplication.cpp:794
+msgid "Exiting."
+msgstr "Saliendo."
+
+#: src/frontends/qt4/GuiApplication.cpp:856
+msgid "Syntax: set-color <lyx_name> <x11_name>"
+msgstr "Sintaxis: set-color <nombre_lyx> <nombre_x11>"
+
+#: src/frontends/qt4/GuiApplication.cpp:872
+#, c-format
+msgid "Set-color \"%1$s\" failed - color is undefined or may not be redefined"
+msgstr ""
+"set-color \"%1$s\" falló - el color no está definido o no pudo ser redefinido"
+
+#: src/frontends/qt4/GuiApplication.cpp:1152
+#, fuzzy
+msgid "The current document was closed."
+msgstr "La impresión del documento falló"
+
+#: src/frontends/qt4/GuiApplication.cpp:1162
+#, fuzzy
+msgid ""
+"LyX has caught an exception, it will now attempt to save all unsaved "
+"documents and exit.\n"
+"\n"
+"Exception: "
+msgstr ""
+"LyX atrapó una excepción, ahora intentará guardar todos los documentos no "
+"guardados y salir.\n"
+"\n"
+"Excepción: "
+
+#: src/frontends/qt4/GuiApplication.cpp:1166
+#: src/frontends/qt4/GuiApplication.cpp:1172
+msgid "Software exception Detected"
+msgstr "Detectada excepción del programa"
+
+#: src/frontends/qt4/GuiApplication.cpp:1170
+#, fuzzy
+msgid ""
+"LyX has caught some really weird exception, it will now attempt to save all "
+"unsaved documents and exit."
+msgstr ""
+"LyX ha atrapado alguna excepción realmente rara, ahora intentará guardar "
+"todos los documentos no guardados y salir."
+
+#: src/frontends/qt4/GuiApplication.cpp:1335
+#, fuzzy
+msgid "Could not find UI definition file"
+msgstr "No se pudo leer archivo de configuración"
+
+#: src/frontends/qt4/GuiBibitem.cpp:28
+msgid "Bibliography Entry Settings"
+msgstr "Configuración de entrada bibliográfica"
+
+#: src/frontends/qt4/GuiBibtex.cpp:53
+msgid "BibTeX Bibliography"
+msgstr "Bibliografía BibTeX"
+
+#: src/frontends/qt4/GuiBibtex.cpp:424 src/frontends/qt4/GuiBibtex.cpp:434
+#: src/frontends/qt4/GuiDocument.cpp:1279
+#: src/frontends/qt4/GuiExternal.cpp:661 src/frontends/qt4/GuiGraphics.cpp:740
+#: src/frontends/qt4/GuiInclude.cpp:325 src/frontends/qt4/GuiView.cpp:1190
+#: src/frontends/qt4/GuiView.cpp:1248 src/frontends/qt4/GuiView.cpp:1381
+#: src/frontends/qt4/GuiView.cpp:1500 src/frontends/qt4/GuiView.cpp:1579
+msgid "Documents|#o#O"
+msgstr "Documentos|#o#O"
+
+#: src/frontends/qt4/GuiBibtex.cpp:426
+msgid "BibTeX Databases (*.bib)"
+msgstr "Base de datos BibTeX (*.bib)"
+
+#: src/frontends/qt4/GuiBibtex.cpp:428
+msgid "Select a BibTeX database to add"
+msgstr "Seleccionar una base datos BibTeX para añadir"
+
+#: src/frontends/qt4/GuiBibtex.cpp:436
+msgid "BibTeX Styles (*.bst)"
+msgstr "Estilos BibTeX (*.bst)"
+
+#: src/frontends/qt4/GuiBibtex.cpp:438
+msgid "Select a BibTeX style"
+msgstr "Seleccionar un estilo BibTeX"
+
+#: src/frontends/qt4/GuiBox.cpp:56
+#, fuzzy
+msgid "No frame"
+msgstr "Sin marco"
+
+#: src/frontends/qt4/GuiBox.cpp:56
+#, fuzzy
+msgid "Simple rectangular frame"
+msgstr "marco de recuadro"
+
+#: src/frontends/qt4/GuiBox.cpp:57
+#, fuzzy
+msgid "Oval frame, thin"
+msgstr "Marco ovalado, fino"
+
+#: src/frontends/qt4/GuiBox.cpp:57
+#, fuzzy
+msgid "Oval frame, thick"
+msgstr "Marco ovalado, grueso"