+ for curline in range(i,j):
+ l = document.body[curline].find("\\xymatrix")
+ if l != -1:
+ has_preamble = True;
+ break;
+ i = j + 1
+
+ if has_equal_spacing and not has_preamble:
+ add_to_preamble(document, ['\\usepackage[all]{xy}'])
+
+
+def revert_notefontcolor(document):
+ " Reverts greyed-out note font color to preamble code "
+
+ i = find_token(document.header, "\\notefontcolor", 0)
+ if i == -1:
+ return
+
+ colorcode = get_value(document.header, '\\notefontcolor', i)
+ del document.header[i]
+
+ # are there any grey notes?
+ if find_token(document.body, "\\begin_inset Note Greyedout", 0) == -1:
+ # no need to do anything else, and \renewcommand will throw
+ # an error since lyxgreyedout will not exist.
+ return
+
+ # the color code is in the form #rrggbb where every character denotes a hex number
+ red = hex2ratio(colorcode[1:3])
+ green = hex2ratio(colorcode[3:5])
+ blue = hex2ratio(colorcode[5:7])
+ # write the preamble
+ insert_to_preamble(document,
+ [ '% for greyed-out notes',
+ '\\@ifundefined{definecolor}{\\usepackage{color}}{}'
+ '\\definecolor{note_fontcolor}{rgb}{%s,%s,%s}' % (red, green, blue),
+ '\\renewenvironment{lyxgreyedout}',
+ ' {\\textcolor{note_fontcolor}\\bgroup}{\\egroup}'])
+
+
+def revert_turkmen(document):
+ "Set language Turkmen to English"
+
+ if document.language == "turkmen":
+ document.language = "english"
+ i = find_token(document.header, "\\language", 0)
+ if i != -1:
+ document.header[i] = "\\language english"
+
+ j = 0
+ while True:
+ j = find_token(document.body, "\\lang turkmen", j)
+ if j == -1:
+ return
+ document.body[j] = document.body[j].replace("\\lang turkmen", "\\lang english")
+ j += 1
+
+
+def revert_fontcolor(document):
+ " Reverts font color to preamble code "
+ i = find_token(document.header, "\\fontcolor", 0)
+ if i == -1:
+ return
+ colorcode = get_value(document.header, '\\fontcolor', i)
+ del document.header[i]
+ # don't clutter the preamble if font color is not set
+ if colorcode == "#000000":
+ return
+ # the color code is in the form #rrggbb where every character denotes a hex number
+ red = hex2ratio(colorcode[1:3])
+ green = hex2ratio(colorcode[3:5])
+ blue = hex2ratio(colorcode[5:7])
+ # write the preamble
+ insert_to_preamble(document,
+ ['% Set the font color',
+ '\\@ifundefined{definecolor}{\\usepackage{color}}{}',
+ '\\definecolor{document_fontcolor}{rgb}{%s,%s,%s}' % (red, green, blue),
+ '\\color{document_fontcolor}'])
+
+
+def revert_shadedboxcolor(document):
+ " Reverts shaded box color to preamble code "
+ i = find_token(document.header, "\\boxbgcolor", 0)
+ if i == -1:
+ return
+ colorcode = get_value(document.header, '\\boxbgcolor', i)
+ del document.header[i]
+ # the color code is in the form #rrggbb
+ red = hex2ratio(colorcode[1:3])
+ green = hex2ratio(colorcode[3:5])
+ blue = hex2ratio(colorcode[5:7])
+ # write the preamble
+ insert_to_preamble(document,
+ ['% Set the color of boxes with shaded background',
+ '\\@ifundefined{definecolor}{\\usepackage{color}}{}',
+ "\\definecolor{shadecolor}{rgb}{%s,%s,%s}" % (red, green, blue)])
+
+
+def revert_lyx_version(document):
+ " Reverts LyX Version information from Inset Info "
+ version = "LyX version"
+ try:
+ import lyx2lyx_version
+ version = lyx2lyx_version.version
+ except:
+ pass
+
+ i = 0
+ while 1:
+ i = find_token(document.body, '\\begin_inset Info', i)
+ if i == -1:
+ return
+ j = find_end_of_inset(document.body, i + 1)
+ if j == -1:
+ document.warning("Malformed LyX document: Could not find end of Info inset.")
+ i += 1
+ continue
+
+ # We expect:
+ # \begin_inset Info
+ # type "lyxinfo"
+ # arg "version"
+ # \end_inset
+ typ = get_quoted_value(document.body, "type", i, j)
+ arg = get_quoted_value(document.body, "arg", i, j)
+ if arg != "version" or typ != "lyxinfo":
+ i = j + 1
+ continue
+
+ # We do not actually know the version of LyX used to produce the document.
+ # But we can use our version, since we are reverting.
+ s = [version]
+ # Now we want to check if the line after "\end_inset" is empty. It normally
+ # is, so we want to remove it, too.
+ lastline = j + 1
+ if document.body[j + 1].strip() == "":
+ lastline = j + 2
+ document.body[i: lastline] = s
+ i = i + 1
+
+
+def revert_math_scale(document):
+ " Remove math scaling and LaTeX options "
+ del_token(document.header, '\\html_math_img_scale', 0)
+ del_token(document.header, '\\html_latex_start', 0)
+ del_token(document.header, '\\html_latex_end', 0)
+
+
+def revert_pagesizes(document):
+ " Revert page sizes to default "
+ i = find_token(document.header, '\\papersize', 0)
+ if i != -1:
+ size = document.header[i][11:]
+ if size == "a0paper" or size == "a1paper" or size == "a2paper" \
+ or size == "a6paper" or size == "b0paper" or size == "b1paper" \
+ or size == "b2paper" or size == "b6paper" or size == "b0j" \
+ or size == "b1j" or size == "b2j" or size == "b3j" or size == "b4j" \
+ or size == "b5j" or size == "b6j":
+ del document.header[i]
+
+
+def revert_DIN_C_pagesizes(document):
+ " Revert DIN C page sizes to default "
+ i = find_token(document.header, '\\papersize', 0)
+ if i != -1:
+ size = document.header[i][11:]
+ if size == "c0paper" or size == "c1paper" or size == "c2paper" \
+ or size == "c3paper" or size == "c4paper" or size == "c5paper" \
+ or size == "c6paper":
+ del document.header[i]
+
+
+def convert_html_quotes(document):
+ " Remove quotes around html_latex_start and html_latex_end "
+
+ i = find_token(document.header, '\\html_latex_start', 0)
+ if i != -1:
+ line = document.header[i]
+ l = re.compile(r'\\html_latex_start\s+"(.*)"')
+ m = l.match(line)
+ if m:
+ document.header[i] = "\\html_latex_start " + m.group(1)
+
+ i = find_token(document.header, '\\html_latex_end', 0)
+ if i != -1:
+ line = document.header[i]
+ l = re.compile(r'\\html_latex_end\s+"(.*)"')
+ m = l.match(line)
+ if m:
+ document.header[i] = "\\html_latex_end " + m.group(1)
+
+
+def revert_html_quotes(document):
+ " Remove quotes around html_latex_start and html_latex_end "
+
+ i = find_token(document.header, '\\html_latex_start', 0)
+ if i != -1:
+ line = document.header[i]
+ l = re.compile(r'\\html_latex_start\s+(.*)')
+ m = l.match(line)
+ if not m:
+ document.warning("Weird html_latex_start line: " + line)
+ del document.header[i]
+ else:
+ document.header[i] = "\\html_latex_start \"" + m.group(1) + "\""
+
+ i = find_token(document.header, '\\html_latex_end', 0)
+ if i != -1:
+ line = document.header[i]
+ l = re.compile(r'\\html_latex_end\s+(.*)')
+ m = l.match(line)
+ if not m:
+ document.warning("Weird html_latex_end line: " + line)
+ del document.header[i]
+ else:
+ document.header[i] = "\\html_latex_end \"" + m.group(1) + "\""
+
+
+def revert_output_sync(document):
+ " Remove forward search options "
+ del_token(document.header, '\\output_sync_macro', 0)
+ del_token(document.header, '\\output_sync', 0)
+
+
+def revert_align_decimal(document):
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset Tabular", i)
+ if i == -1:
+ return
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Unable to find end of Tabular inset at line " + str(i))
+ i += 1
+ continue
+ cell = find_token(document.body, "<cell", i, j)
+ if cell == -1:
+ document.warning("Can't find any cells in Tabular inset at line " + str(i))
+ i = j
+ continue
+ k = i + 1
+ while True:
+ k = find_token(document.body, "<column", k, cell)
+ if k == -1:
+ return
+ if document.body[k].find('alignment="decimal"') == -1:
+ k += 1
+ continue
+ remove_option(document.body, k, 'decimal_point')
+ document.body[k] = \
+ document.body[k].replace('alignment="decimal"', 'alignment="center"')
+ k += 1
+
+
+def convert_optarg(document):
+ " Convert \\begin_inset OptArg to \\begin_inset Argument "
+ i = 0
+ while 1:
+ i = find_token(document.body, '\\begin_inset OptArg', i)
+ if i == -1:
+ return
+ document.body[i] = "\\begin_inset Argument"
+ i += 1
+
+
+def revert_argument(document):
+ " Convert \\begin_inset Argument to \\begin_inset OptArg "
+ i = 0
+ while 1:
+ i = find_token(document.body, '\\begin_inset Argument', i)
+ if i == -1:
+ return
+ document.body[i] = "\\begin_inset OptArg"
+ i += 1
+
+
+def revert_makebox(document):
+ " Convert \\makebox to TeX code "
+ i = 0
+ while 1:
+ i = find_token(document.body, '\\begin_inset Box', i)
+ if i == -1:
+ break
+ z = find_end_of_inset(document.body, i)
+ if z == -1:
+ document.warning("Malformed LyX document: Can't find end of box inset.")
+ i += 1
+ continue
+ blay = find_token(document.body, "\\begin_layout", i, z)
+ if blay == -1:
+ document.warning("Malformed LyX document: Can't find layout in box.")
+ i = z
+ continue
+ # by looking before the layout we make sure we're actually finding
+ # an option, not text.
+ j = find_token(document.body, 'use_makebox', i, blay)
+ if j == -1:
+ i = z
+ continue
+
+ if not check_token(document.body[i], "\\begin_inset Box Frameless") \
+ or get_value(document.body, 'use_makebox', j) != 1:
+ del document.body[j]
+ i = z
+ continue
+ bend = find_end_of_layout(document.body, blay)
+ if bend == -1 or bend > z:
+ document.warning("Malformed LyX document: Can't find end of layout in box.")
+ i = z
+ continue
+ # determine the alignment
+ align = get_quoted_value(document.body, 'hor_pos', i, blay, "c")
+ # determine the width
+ length = get_quoted_value(document.body, 'width', i, blay, "50col%")
+ length = latex_length(length)[1]
+ # remove the \end_layout \end_inset pair
+ document.body[bend:z + 1] = put_cmd_in_ert("}")
+ subst = "\\makebox[" + length + "][" \
+ + align + "]{"
+ document.body[i:blay + 1] = put_cmd_in_ert(subst)
+ i += 1
+
+
+def convert_use_makebox(document):
+ " Adds use_makebox option for boxes "
+ i = 0
+ while 1:
+ i = find_token(document.body, '\\begin_inset Box', i)
+ if i == -1:
+ return
+ # all of this is to make sure we actually find the use_parbox
+ # that is an option for this box, not some text elsewhere.
+ z = find_end_of_inset(document.body, i)
+ if z == -1:
+ document.warning("Can't find end of box inset!!")
+ i += 1
+ continue
+ blay = find_token(document.body, "\\begin_layout", i, z)
+ if blay == -1:
+ document.warning("Can't find layout in box inset!!")
+ i = z
+ continue
+ # so now we are looking for use_parbox before the box's layout
+ k = find_token(document.body, 'use_parbox', i, blay)
+ if k == -1:
+ document.warning("Malformed LyX document: Can't find use_parbox statement in box.")
+ i = z
+ continue
+ document.body.insert(k + 1, "use_makebox 0")
+ i = blay + 1 # not z + 1 (box insets may be nested)
+
+
+def revert_IEEEtran(document):
+ " Convert IEEEtran layouts and styles to TeX code "
+ if document.textclass != "IEEEtran":
+ return
+ revert_flex_inset(document.body, "IEEE membership", "\\IEEEmembership")
+ revert_flex_inset(document.body, "Lowercase", "\\MakeLowercase")
+ layouts = ("Special Paper Notice", "After Title Text", "Publication ID",
+ "Page headings", "Biography without photo")
+ latexcmd = {"Special Paper Notice": "\\IEEEspecialpapernotice",
+ "After Title Text": "\\IEEEaftertitletext",
+ "Publication ID": "\\IEEEpubid"}
+ obsoletedby = {"Page headings": "MarkBoth",
+ "Biography without photo": "BiographyNoPhoto"}
+ for layout in layouts:
+ i = 0
+ while True:
+ i = find_token(document.body, '\\begin_layout ' + layout, i)
+ if i == -1:
+ break
+ j = find_end_of_layout(document.body, i)
+ if j == -1:
+ document.warning("Malformed LyX document: Can't find end of " + layout + " layout.")
+ i += 1
+ continue
+ if layout in obsoletedby:
+ document.body[i] = "\\begin_layout " + obsoletedby[layout]
+ i = j
+ continue
+ content = lyx2latex(document, document.body[i:j + 1])
+ add_to_preamble(document, [latexcmd[layout] + "{" + content + "}"])
+ del document.body[i:j + 1]
+ # no need to reset i
+
+
+def convert_prettyref(document):
+ " Converts prettyref references to neutral formatted refs "
+ re_ref = re.compile("^\s*reference\s+\"(\w+):(\S+)\"")
+ nm_ref = re.compile("^\s*name\s+\"(\w+):(\S+)\"")
+
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset CommandInset ref", i)
+ if i == -1:
+ break
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Malformed LyX document: No end of InsetRef!")
+ i += 1
+ continue
+ k = find_token(document.body, "LatexCommand prettyref", i, j)
+ if k != -1:
+ document.body[k] = "LatexCommand formatted"
+ i = j + 1
+ document.header.insert(-1, "\\use_refstyle 0")
+
+
+def revert_refstyle(document):
+ " Reverts neutral formatted refs to prettyref "
+ re_ref = re.compile("^reference\s+\"(\w+):(\S+)\"")
+ nm_ref = re.compile("^\s*name\s+\"(\w+):(\S+)\"")
+
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset CommandInset ref", i)
+ if i == -1:
+ break
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Malformed LyX document: No end of InsetRef")
+ i += 1
+ continue
+ k = find_token(document.body, "LatexCommand formatted", i, j)
+ if k != -1:
+ document.body[k] = "LatexCommand prettyref"
+ i = j + 1
+ i = find_token(document.header, "\\use_refstyle", 0)
+ if i != -1:
+ document.header.pop(i)
+
+
+def revert_nameref(document):
+ " Convert namerefs to regular references "
+ cmds = ["Nameref", "nameref"]
+ foundone = False
+ rx = re.compile(r'reference "(.*)"')
+ for cmd in cmds:
+ i = 0
+ oldcmd = "LatexCommand " + cmd
+ while 1:
+ # It seems better to look for this, as most of the reference
+ # insets won't be ones we care about.
+ i = find_token(document.body, oldcmd, i)
+ if i == -1:
+ break
+ cmdloc = i
+ i += 1
+ # Make sure it is actually in an inset!
+ # A normal line could begin with "LatexCommand nameref"!
+ val = is_in_inset(document.body, cmdloc, \
+ "\\begin_inset CommandInset ref")
+ if not val:
+ continue
+ stins, endins = val
+
+ # ok, so it is in an InsetRef
+ refline = find_token(document.body, "reference", stins, endins)
+ if refline == -1:
+ document.warning("Can't find reference for inset at line " + stinst + "!!")
+ continue
+ m = rx.match(document.body[refline])
+ if not m:
+ document.warning("Can't match reference line: " + document.body[ref])
+ continue
+ foundone = True
+ ref = m.group(1)
+ newcontent = put_cmd_in_ert('\\' + cmd + '{' + ref + '}')
+ document.body[stins:endins + 1] = newcontent
+
+ if foundone:
+ add_to_preamble(document, ["\usepackage{nameref}"])
+
+
+def remove_Nameref(document):
+ " Convert Nameref commands to nameref commands "
+ i = 0
+ while 1:
+ # It seems better to look for this, as most of the reference
+ # insets won't be ones we care about.
+ i = find_token(document.body, "LatexCommand Nameref" , i)
+ if i == -1:
+ break
+ cmdloc = i
+ i += 1
+
+ # Make sure it is actually in an inset!
+ val = is_in_inset(document.body, cmdloc, \
+ "\\begin_inset CommandInset ref")
+ if not val:
+ continue
+ document.body[cmdloc] = "LatexCommand nameref"
+
+
+def revert_mathrsfs(document):
+ " Load mathrsfs if \mathrsfs us use in the document "
+ i = 0
+ for line in document.body:
+ if line.find("\\mathscr{") != -1:
+ add_to_preamble(document, ["\\usepackage{mathrsfs}"])
+ return
+
+
+def convert_flexnames(document):
+ "Convert \\begin_inset Flex Custom:Style to \\begin_inset Flex Style and similarly for CharStyle and Element."
+
+ i = 0
+ rx = re.compile(r'^\\begin_inset Flex (?:Custom|CharStyle|Element):(.+)$')
+ while True:
+ i = find_token(document.body, "\\begin_inset Flex", i)
+ if i == -1:
+ return
+ m = rx.match(document.body[i])
+ if m:
+ document.body[i] = "\\begin_inset Flex " + m.group(1)
+ i += 1
+
+
+flex_insets = {
+ "Alert" : "CharStyle:Alert",
+ "Code" : "CharStyle:Code",
+ "Concepts" : "CharStyle:Concepts",
+ "E-Mail" : "CharStyle:E-Mail",
+ "Emph" : "CharStyle:Emph",
+ "Expression" : "CharStyle:Expression",
+ "Initial" : "CharStyle:Initial",
+ "Institute" : "CharStyle:Institute",
+ "Meaning" : "CharStyle:Meaning",
+ "Noun" : "CharStyle:Noun",
+ "Strong" : "CharStyle:Strong",
+ "Structure" : "CharStyle:Structure",
+ "ArticleMode" : "Custom:ArticleMode",
+ "Endnote" : "Custom:Endnote",
+ "Glosse" : "Custom:Glosse",
+ "PresentationMode" : "Custom:PresentationMode",
+ "Tri-Glosse" : "Custom:Tri-Glosse"
+}
+
+flex_elements = {
+ "Abbrev" : "Element:Abbrev",
+ "CCC-Code" : "Element:CCC-Code",
+ "Citation-number" : "Element:Citation-number",
+ "City" : "Element:City",
+ "Code" : "Element:Code",
+ "CODEN" : "Element:CODEN",
+ "Country" : "Element:Country",
+ "Day" : "Element:Day",
+ "Directory" : "Element:Directory",
+ "Dscr" : "Element:Dscr",
+ "Email" : "Element:Email",
+ "Emph" : "Element:Emph",
+ "Filename" : "Element:Filename",
+ "Firstname" : "Element:Firstname",
+ "Fname" : "Element:Fname",
+ "GuiButton" : "Element:GuiButton",
+ "GuiMenu" : "Element:GuiMenu",
+ "GuiMenuItem" : "Element:GuiMenuItem",
+ "ISSN" : "Element:ISSN",
+ "Issue-day" : "Element:Issue-day",
+ "Issue-months" : "Element:Issue-months",
+ "Issue-number" : "Element:Issue-number",
+ "KeyCap" : "Element:KeyCap",
+ "KeyCombo" : "Element:KeyCombo",
+ "Keyword" : "Element:Keyword",
+ "Literal" : "Element:Literal",
+ "MenuChoice" : "Element:MenuChoice",
+ "Month" : "Element:Month",
+ "Orgdiv" : "Element:Orgdiv",
+ "Orgname" : "Element:Orgname",
+ "Postcode" : "Element:Postcode",
+ "SS-Code" : "Element:SS-Code",
+ "SS-Title" : "Element:SS-Title",
+ "State" : "Element:State",
+ "Street" : "Element:Street",
+ "Surname" : "Element:Surname",
+ "Volume" : "Element:Volume",
+ "Year" : "Element:Year"
+}
+
+
+def revert_flexnames(document):
+ if document.backend == "latex":
+ flexlist = flex_insets
+ else:
+ flexlist = flex_elements
+
+ rx = re.compile(r'^\\begin_inset Flex\s+(.+)$')
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset Flex", i)
+ if i == -1:
+ return
+ m = rx.match(document.body[i])
+ if not m:
+ document.warning("Illegal flex inset: " + document.body[i])
+ i += 1
+ continue
+ style = m.group(1)
+ if style in flexlist:
+ document.body[i] = "\\begin_inset Flex " + flexlist[style]
+ i += 1
+
+
+def convert_mathdots(document):
+ " Load mathdots automatically "
+ i = find_token(document.header, "\\use_mhchem" , 0)
+ if i == -1:
+ i = find_token(document.header, "\\use_esint" , 0)
+ if i == -1:
+ document.warning("Malformed LyX document: Can't find \\use_mhchem.")
+ return;
+ j = find_token(document.preamble, "\\usepackage{mathdots}", 0)
+ if j == -1:
+ document.header.insert(i + 1, "\\use_mathdots 0")
+ else:
+ document.header.insert(i + 1, "\\use_mathdots 2")
+ del document.preamble[j]
+
+
+def revert_mathdots(document):
+ " Load mathdots if used in the document "
+
+ mathdots = find_token(document.header, "\\use_mathdots" , 0)
+ if mathdots == -1:
+ document.warning("No \\use_mathdots line. Assuming auto.")
+ else:
+ val = get_value(document.header, "\\use_mathdots", mathdots)
+ del document.header[mathdots]
+ try:
+ usedots = int(val)
+ except:
+ document.warning("Invalid \\use_mathdots value: " + val + ". Assuming auto.")
+ # probably usedots has not been changed, but be safe.
+ usedots = 1
+
+ if usedots == 0:
+ # do not load case
+ return
+ if usedots == 2:
+ # force load case
+ add_to_preamble(document, ["\\usepackage{mathdots}"])
+ return
+
+ # so we are in the auto case. we want to load mathdots if \iddots is used.
+ i = 0
+ while True:
+ i = find_token(document.body, '\\begin_inset Formula', i)
+ if i == -1:
+ return
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Malformed LyX document: Can't find end of Formula inset at line " + str(i))
+ i += 1
+ continue
+ code = "\n".join(document.body[i:j])
+ if code.find("\\iddots") != -1:
+ add_to_preamble(document, ["\\@ifundefined{iddots}{\\usepackage{mathdots}}"])
+ return
+ i = j
+
+
+def convert_rule(document):
+ " Convert \\lyxline to CommandInset line. "
+ i = 0
+
+ inset = ['\\begin_inset CommandInset line',
+ 'LatexCommand rule',
+ 'offset "0.5ex"',
+ 'width "100line%"',
+ 'height "1pt"', '',
+ '\\end_inset', '', '']
+
+ # if paragraphs are indented, we may have to unindent to get the
+ # line to be full-width.
+ indent = get_value(document.header, "\\paragraph_separation", 0)
+ have_indent = (indent == "indent")
+
+ while True:
+ i = find_token(document.body, "\\lyxline" , i)
+ if i == -1:
+ return
+
+ # we need to find out if this line follows other content
+ # in its paragraph. find its layout....
+ lastlay = find_token_backwards(document.body, "\\begin_layout", i)
+ if lastlay == -1:
+ document.warning("Can't find layout for line at " + str(i))
+ # do the best we can.
+ document.body[i:i+1] = inset
+ i += len(inset)
+ continue
+
+ # ...and look for other content before it.
+ lineisfirst = True
+ for line in document.body[lastlay + 1:i]:
+ # is it empty or a paragraph option?
+ if not line or line[0] == '\\':
+ continue
+ lineisfirst = False
+ break
+
+ if lineisfirst:
+ document.body[i:i+1] = inset
+ if indent:
+ # we need to unindent, lest the line be too long
+ document.body.insert(lastlay + 1, "\\noindent")
+ i += len(inset)
+ else:
+ # so our line is in the middle of a paragraph
+ # we need to add a new line, lest this line follow the
+ # other content on that line and run off the side of the page
+ document.body[i:i+1] = inset
+ document.body[i:i] = ["\\begin_inset Newline newline", "\\end_inset", ""]
+ i += len(inset)
+
+
+def revert_rule(document):
+ " Revert line insets to Tex code "
+ i = 0
+ while 1:
+ i = find_token(document.body, "\\begin_inset CommandInset line" , i)
+ if i == -1:
+ return
+ # find end of inset
+ j = find_token(document.body, "\\end_inset" , i)
+ if j == -1:
+ document.warning("Malformed LyX document: Can't find end of line inset.")
+ return
+ # determine the optional offset
+ offset = get_quoted_value(document.body, 'offset', i, j)
+ if offset:
+ offset = '[' + offset + ']'
+ # determine the width
+ width = get_quoted_value(document.body, 'width', i, j, "100col%")
+ width = latex_length(width)[1]
+ # determine the height
+ height = get_quoted_value(document.body, 'height', i, j, "1pt")
+ height = latex_length(height)[1]
+ # output the \rule command
+ subst = "\\rule[" + offset + "]{" + width + "}{" + height + "}"
+ document.body[i:j + 1] = put_cmd_in_ert(subst)
+ i += len(subst) - (j - i)
+
+
+def revert_diagram(document):
+ " Add the feyn package if \\Diagram is used in math "
+ i = 0
+ while True:
+ i = find_token(document.body, '\\begin_inset Formula', i)
+ if i == -1:
+ return
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Malformed LyX document: Can't find end of Formula inset.")
+ return
+ lines = "\n".join(document.body[i:j])
+ if lines.find("\\Diagram") == -1:
+ i = j
+ continue
+ add_to_preamble(document, ["\\usepackage{feyn}"])
+ # only need to do it once!
+ return
+
+chapters = ("amsbook", "book", "docbook-book", "elsart", "extbook", "extreport",
+ "jbook", "jreport", "jsbook", "literate-book", "literate-report", "memoir",
+ "mwbk", "mwrep", "recipebook", "report", "scrbook", "scrreprt", "svmono",
+ "svmult", "tbook", "treport", "tufte-book")
+
+def convert_bibtex_clearpage(document):
+ " insert a clear(double)page bibliographystyle if bibtotoc option is used "
+
+ if document.textclass not in chapters:
+ return
+
+ i = find_token(document.header, '\\papersides', 0)
+ sides = 0
+ if i == -1:
+ document.warning("Malformed LyX document: Can't find papersides definition.")
+ document.warning("Assuming single sided.")
+ sides = 1
+ else:
+ val = get_value(document.header, "\\papersides", i)
+ try:
+ sides = int(val)
+ except:
+ pass
+ if sides != 1 and sides != 2:
+ document.warning("Invalid papersides value: " + val)
+ document.warning("Assuming single sided.")
+ sides = 1
+
+ j = 0
+ while True:
+ j = find_token(document.body, "\\begin_inset CommandInset bibtex", j)
+ if j == -1:
+ return
+
+ k = find_end_of_inset(document.body, j)
+ if k == -1:
+ document.warning("Can't find end of Bibliography inset at line " + str(j))
+ j += 1
+ continue
+
+ # only act if there is the option "bibtotoc"
+ val = get_value(document.body, 'options', j, k)
+ if not val:
+ document.warning("Can't find options for bibliography inset at line " + str(j))
+ j = k
+ continue
+
+ if val.find("bibtotoc") == -1:
+ j = k
+ continue
+
+ # so we want to insert a new page right before the paragraph that
+ # this bibliography thing is in.
+ lay = find_token_backwards(document.body, "\\begin_layout", j)
+ if lay == -1:
+ document.warning("Can't find layout containing bibliography inset at line " + str(j))
+ j = k
+ continue
+
+ if sides == 1:
+ cmd = "clearpage"
+ else:
+ cmd = "cleardoublepage"
+ subst = ['\\begin_layout Standard',
+ '\\begin_inset Newpage ' + cmd,
+ '\\end_inset', '', '',
+ '\\end_layout', '']
+ document.body[lay:lay] = subst
+ j = k + len(subst)
+
+
+def check_passthru(document):
+ tc = document.textclass
+ ok = (tc == "literate-article" or tc == "literate-book" or tc == "literate-report")
+ if not ok:
+ mods = document.get_module_list()
+ for mod in mods:
+ if mod == "sweave" or mod == "noweb":
+ ok = True
+ break
+ return ok
+
+
+def convert_passthru(document):
+ " http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg161298.html "
+ if not check_passthru:
+ return
+
+ rx = re.compile("\\\\begin_layout \s*(\w+)")
+ beg = 0
+ for lay in ["Chunk", "Scrap"]:
+ while True:
+ beg = find_token(document.body, "\\begin_layout " + lay, beg)
+ if beg == -1:
+ break
+ end = find_end_of_layout(document.body, beg)
+ if end == -1:
+ document.warning("Can't find end of layout at line " + str(beg))
+ beg += 1
+ continue
+
+ # we are now going to replace newline insets within this layout
+ # by new instances of this layout. so we have repeated layouts
+ # instead of newlines.
+
+ # if the paragraph has any customization, however, we do not want to
+ # do the replacement.
+ if document.body[beg + 1].startswith("\\"):
+ beg = end + 1
+ continue
+
+ ns = beg
+ while True:
+ ns = find_token(document.body, "\\begin_inset Newline newline", ns, end)
+ if ns == -1:
+ break
+ ne = find_end_of_inset(document.body, ns)
+ if ne == -1 or ne > end:
+ document.warning("Can't find end of inset at line " + str(nb))
+ ns += 1
+ continue
+ if document.body[ne + 1] == "":
+ ne += 1
+ subst = ["\\end_layout", "", "\\begin_layout " + lay]
+ document.body[ns:ne + 1] = subst
+ # now we need to adjust end, in particular, but might as well
+ # do ns properly, too
+ newlines = (ne - ns) - len(subst)
+ ns += newlines + 2
+ end += newlines + 2
+
+ # ok, we now want to find out if the next layout is the
+ # same as this one. if so, we will insert an extra copy of it
+ didit = False
+ next = find_token(document.body, "\\begin_layout", end)
+ if next != -1:
+ m = rx.match(document.body[next])
+ if m:
+ nextlay = m.group(1)
+ if nextlay == lay:
+ subst = ["\\begin_layout " + lay, "", "\\end_layout", ""]
+ document.body[next:next] = subst
+ didit = True
+ beg = end + 1
+ if didit:
+ beg += 4 # for the extra layout
+
+
+def revert_passthru(document):
+ " http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg161298.html "
+ if not check_passthru:
+ return
+ rx = re.compile("\\\\begin_layout \s*(\w+)")
+ beg = 0
+ for lay in ["Chunk", "Scrap"]:
+ while True:
+ beg = find_token(document.body, "\\begin_layout " + lay, beg)
+ if beg == -1:
+ break
+ end = find_end_of_layout(document.body, beg)
+ if end == -1:
+ document.warning("Can't find end of layout at line " + str(beg))
+ beg += 1
+ continue
+
+ # we now want to find out if the next layout is the
+ # same as this one. but we will need to do this over and
+ # over again.
+ while True:
+ next = find_token(document.body, "\\begin_layout", end)
+ if next == -1:
+ break
+ m = rx.match(document.body[next])
+ if not m:
+ break
+ nextlay = m.group(1)
+ if nextlay != lay:
+ break
+ # so it is the same layout again. we now want to know if it is empty.
+ # but first let's check and make sure there is no content between the
+ # two layouts. i'm not sure if that can happen or not.
+ for l in range(end + 1, next):
+ document.warning("c'" + document.body[l] + "'")
+ if document.body[l] != "":
+ document.warning("Found content between adjacent " + lay + " layouts!")
+ break
+ nextend = find_end_of_layout(document.body, next)
+ if nextend == -1:
+ document.warning("Can't find end of layout at line " + str(next))
+ break
+ empty = True
+ for l in range(next + 1, nextend):
+ document.warning("e'" + document.body[l] + "'")
+ if document.body[l] != "":
+ empty = False
+ break
+ if empty:
+ # empty layouts just get removed
+ # should we check if it's before yet another such layout?
+ del document.body[next : nextend + 1]
+ # and we do not want to check again. we know the next layout
+ # should be another Chunk and should be left as is.
+ break
+ else:
+ # if it's not empty, then we want to insert a newline in place
+ # of the layout switch
+ subst = ["\\begin_inset Newline newline", "\\end_inset", ""]
+ document.body[end : next + 1] = subst
+ # and now we have to find the end of the new, larger layout
+ newend = find_end_of_layout(document.body, beg)
+ if newend == -1:
+ document.warning("Can't find end of new layout at line " + str(beg))
+ break
+ end = newend
+ beg = end + 1
+
+
+def revert_multirowOffset(document):
+ " Revert multirow cells with offset in tables to TeX-code"
+ # this routine is the same as the revert_multirow routine except that
+ # it checks additionally for the offset
+
+ # first, let's find out if we need to do anything
+ i = find_token(document.body, '<cell multirow="3" mroffset=', 0)
+ if i == -1:
+ return
+
+ add_to_preamble(document, ["\\usepackage{multirow}"])
+
+ rgx = re.compile(r'mroffset="[^"]+?"')
+ begin_table = 0
+
+ while True:
+ # find begin/end of table
+ begin_table = find_token(document.body, '<lyxtabular version=', begin_table)
+ if begin_table == -1:
+ break
+ end_table = find_end_of(document.body, begin_table, '<lyxtabular', '</lyxtabular>')
+ if end_table == -1:
+ document.warning("Malformed LyX document: Could not find end of table.")
+ begin_table += 1
+ continue
+ # does this table have multirow?
+ i = find_token(document.body, '<cell multirow="3"', begin_table, end_table)
+ if i == -1:
+ begin_table = end_table
+ continue
+
+ # store the number of rows and columns
+ numrows = get_option_value(document.body[begin_table], "rows")
+ numcols = get_option_value(document.body[begin_table], "columns")
+ try:
+ numrows = int(numrows)
+ numcols = int(numcols)
+ except:
+ document.warning("Unable to determine rows and columns!")
+ begin_table = end_table
+ continue
+
+ mrstarts = []
+ multirows = []
+ # collect info on rows and columns of this table.
+ begin_row = begin_table
+ for row in range(numrows):
+ begin_row = find_token(document.body, '<row>', begin_row, end_table)
+ if begin_row == -1:
+ document.warning("Can't find row " + str(row + 1))
+ break
+ end_row = find_end_of(document.body, begin_row, '<row>', '</row>')
+ if end_row == -1:
+ document.warning("Can't find end of row " + str(row + 1))
+ break
+ begin_cell = begin_row
+ multirows.append([])
+ for column in range(numcols):
+ begin_cell = find_token(document.body, '<cell ', begin_cell, end_row)
+ if begin_cell == -1:
+ document.warning("Can't find column " + str(column + 1) + \
+ "in row " + str(row + 1))
+ break
+ # NOTE
+ # this will fail if someone puts "</cell>" in a cell, but
+ # that seems fairly unlikely.
+ end_cell = find_end_of(document.body, begin_cell, '<cell', '</cell>')
+ if end_cell == -1:
+ document.warning("Can't find end of column " + str(column + 1) + \
+ "in row " + str(row + 1))
+ break
+ multirows[row].append([begin_cell, end_cell, 0])
+ if document.body[begin_cell].find('multirow="3" mroffset=') != -1:
+ multirows[row][column][2] = 3 # begin multirow
+ mrstarts.append([row, column])
+ elif document.body[begin_cell].find('multirow="4"') != -1:
+ multirows[row][column][2] = 4 # in multirow
+ begin_cell = end_cell
+ begin_row = end_row
+ # end of table info collection
+
+ # work from the back to avoid messing up numbering
+ mrstarts.reverse()
+ for m in mrstarts:
+ row = m[0]
+ col = m[1]
+ # get column width
+ col_width = get_option_value(document.body[begin_table + 2 + col], "width")
+ # "0pt" means that no width is specified
+ if not col_width or col_width == "0pt":
+ col_width = "*"
+ # determine the number of cells that are part of the multirow
+ nummrs = 1
+ for r in range(row + 1, numrows):
+ if multirows[r][col][2] != 4:
+ break
+ nummrs += 1
+ # take the opportunity to revert this line
+ lineno = multirows[r][col][0]
+ document.body[lineno] = document.body[lineno].\
+ replace(' multirow="4" ', ' ').\
+ replace('valignment="middle"', 'valignment="top"').\
+ replace(' topline="true" ', ' ')
+ # remove bottom line of previous multirow-part cell
+ lineno = multirows[r-1][col][0]
+ document.body[lineno] = document.body[lineno].replace(' bottomline="true" ', ' ')
+ # revert beginning cell
+ bcell = multirows[row][col][0]
+ ecell = multirows[row][col][1]
+ offset = get_option_value(document.body[bcell], "mroffset")
+ document.body[bcell] = document.body[bcell].\
+ replace(' multirow="3" ', ' ').\
+ replace('valignment="middle"', 'valignment="top"')
+ # remove mroffset option
+ document.body[bcell] = rgx.sub('', document.body[bcell])
+
+ blay = find_token(document.body, "\\begin_layout", bcell, ecell)
+ if blay == -1:
+ document.warning("Can't find layout for cell!")
+ continue
+ bend = find_end_of_layout(document.body, blay)
+ if bend == -1:
+ document.warning("Can't find end of layout for cell!")
+ continue
+ # do the later one first, so as not to mess up the numbering
+ # we are wrapping the whole cell in this ert
+ # so before the end of the layout...
+ document.body[bend:bend] = put_cmd_in_ert("}")
+ # ...and after the beginning
+ document.body[blay + 1:blay + 1] = \
+ put_cmd_in_ert("\\multirow{" + str(nummrs) + "}{" + col_width + "}[" \
+ + offset + "]{")
+
+ # on to the next table
+ begin_table = end_table
+
+
+def revert_script(document):
+ " Convert subscript/superscript inset to TeX code "
+ i = 0
+ foundsubscript = False
+ while 1:
+ i = find_token(document.body, '\\begin_inset script', i)
+ if i == -1:
+ break
+ z = find_end_of_inset(document.body, i)
+ if z == -1:
+ document.warning("Malformed LyX document: Can't find end of script inset.")
+ i += 1
+ continue
+ blay = find_token(document.body, "\\begin_layout", i, z)
+ if blay == -1:
+ document.warning("Malformed LyX document: Can't find layout in script inset.")
+ i = z
+ continue
+
+ if check_token(document.body[i], "\\begin_inset script subscript"):
+ subst = '\\textsubscript{'
+ foundsubscript = True
+ elif check_token(document.body[i], "\\begin_inset script superscript"):
+ subst = '\\textsuperscript{'
+ else:
+ document.warning("Malformed LyX document: Unknown type of script inset.")
+ i = z
+ continue
+ bend = find_end_of_layout(document.body, blay)
+ if bend == -1 or bend > z:
+ document.warning("Malformed LyX document: Can't find end of layout in script inset.")
+ i = z
+ continue
+ # remove the \end_layout \end_inset pair
+ document.body[bend:z + 1] = put_cmd_in_ert("}")
+ document.body[i:blay + 1] = put_cmd_in_ert(subst)
+ i += 1
+ # these classes provide a \textsubscript command:
+ # FIXME: Would be nice if we could use the information of the .layout file here
+ classes = ["memoir", "scrartcl", "scrbook", "scrlttr2", "scrreprt"]
+ if foundsubscript and find_token_exact(classes, document.textclass, 0) == -1:
+ add_to_preamble(document, ['\\usepackage{subscript}'])
+
+
+def convert_use_xetex(document):
+ " convert \\use_xetex to \\use_non_tex_fonts "
+ i = 0
+ i = find_token(document.header, "\\use_xetex", 0)
+ if i == -1:
+ return
+
+ val = get_value(document.header, "\\use_xetex", 0)
+ document.header[i] = "\\use_non_tex_fonts " + val
+
+
+def revert_use_xetex(document):
+ " revert \\use_non_tex_fonts to \\use_xetex "
+ i = 0
+ i = find_token(document.header, "\\use_non_tex_fonts", 0)
+ if i == -1:
+ document.warning("Malformed document. No \\use_non_tex_fonts param!")
+ return
+
+ val = get_value(document.header, "\\use_non_tex_fonts", 0)
+ document.header[i] = "\\use_xetex " + val
+
+
+def revert_labeling(document):
+ koma = ("scrartcl", "scrarticle-beamer", "scrbook", "scrlettr",
+ "scrlttr2", "scrreprt")
+ if document.textclass in koma:
+ return
+ i = 0
+ while True:
+ i = find_token_exact(document.body, "\\begin_layout Labeling", i)
+ if i == -1:
+ return
+ document.body[i] = "\\begin_layout List"
+
+
+def revert_langpack(document):
+ " revert \\language_package parameter "
+ i = 0
+ i = find_token(document.header, "\\language_package", 0)
+ if i == -1:
+ document.warning("Malformed document. No \\language_package param!")
+ return
+
+ del document.header[i]
+
+
+def convert_langpack(document):
+ " Add \\language_package parameter "
+ i = find_token(document.header, "\language" , 0)
+ if i == -1:
+ document.warning("Malformed document. No \\language defined!")
+ return
+
+ document.header.insert(i + 1, "\\language_package default")
+
+
+def revert_tabularwidth(document):
+ i = 0
+ while True:
+ i = find_token(document.body, "\\begin_inset Tabular", i)
+ if i == -1:
+ return
+ j = find_end_of_inset(document.body, i)
+ if j == -1:
+ document.warning("Unable to find end of Tabular inset at line " + str(i))
+ i += 1
+ continue
+ i += 1
+ features = find_token(document.body, "<features", i, j)
+ if features == -1:
+ document.warning("Can't find any features in Tabular inset at line " + str(i))
+ i = j
+ continue
+ if document.body[features].find('alignment="tabularwidth"') != -1:
+ remove_option(document.body, features, 'tabularwidth')
+
+def revert_html_css_as_file(document):
+ if not del_token(document.header, '\\html_css_as_file', 0):
+ document.warning("Malformed LyX document: Missing \\html_css_as_file.")