+roll your own
+\begin_inset Quotes erd
+\end_inset
+
+ layout.
+ We strongly suggest copying an existing layout file which uses a similar
+ LaTeX class and then modifying it, if you can do so.
+ At least use an existing file as a starting point so you can find out what
+ items you need to worry about.
+ Again, the specifics are covered below.
+\end_layout
+
+\begin_layout Section
+Declaring a new text class
+\end_layout
+
+\begin_layout Standard
+When it's finally time to get your hands dirty and create or edit your own
+ layout file, the following sections describe what you're up against.
+ Our advice is to go slowly, save and test often, listen to soothing music,
+ and enjoy one or two of your favorite adult beverages; more if you are
+ getting particularly stuck.
+ It's really not that hard, except that the multitude of options can become
+ overwhelming if you try to do to much in one sitting.
+ Go have another adult beverage, just for good measure.
+\end_layout
+
+\begin_layout Standard
+Here we go!
+\end_layout
+
+\begin_layout Standard
+Lines in a layout file which begin with a
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+#
+\end_layout
+
+\end_inset
+
+ are comments.
+ There is one exception to this rule: all layouts should begin with lines
+ like:
+\end_layout
+
+\begin_layout LyX-Code
+
+\size small
+#% Do not delete the line below; configure depends on this
+\end_layout
+
+\begin_layout LyX-Code
+
+\size small
+#
+\backslash
+DeclareLaTeXClass{article}
+\end_layout
+
+\begin_layout Standard
+The second line is used when you configure LyX.
+ The layout file is read by the LaTeX script
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+chkconfig.ltx
+\end_layout
+
+\end_inset
+
+, in a special mode where
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+#
+\end_layout
+
+\end_inset
+
+ is ignored.
+ The first line is just a LaTeX comment, and the second one contains the
+ declaration of the text class.
+ If these lines appear in a file named
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+article.layout
+\end_layout
+
+\end_inset
+
+, then they define a text class of name
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+article
+\end_layout
+
+\end_inset
+
+ (the name of the layout file) which uses the LaTeX document class
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+article.cls
+\end_layout
+
+\end_inset
+
+ (the default is to use the same name as the layout).
+ The string
+\begin_inset Quotes eld
+\end_inset
+
+article
+\begin_inset Quotes erd
+\end_inset
+
+ that appears above is used as a description of the text class in the
+\begin_inset Flex CharStyle:MenuItem
+status collapsed
+
+\begin_layout Plain Layout
+Document\SpecialChar \menuseparator
+Settings
+\end_layout
+
+\end_inset
+
+ dialog.
+\end_layout
+
+\begin_layout Standard
+Let's assume that you wrote your own text class that uses the
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+article.cls
+\end_layout
+
+\end_inset
+
+ document class, but where you changed the appearance of the section headings.
+ If you put it in a file
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+myarticle.layout
+\end_layout
+
+\end_inset
+
+, the header of this file should be:
+\end_layout
+
+\begin_layout LyX-Code
+
+\size small
+#% Do not delete the line below; configure depends on this
+\end_layout
+
+\begin_layout LyX-Code
+
+\size small
+#
+\backslash
+DeclareLaTeXClass[article]{article (with my own headings)}
+\end_layout
+
+\begin_layout Standard
+This declares a text class
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+myarticle
+\end_layout
+
+\end_inset
+
+, associated with the LaTeX document class
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+article.cls
+\end_layout
+
+\end_inset
+
+ and described as
+\begin_inset Quotes eld
+\end_inset
+
+article (with my own headings)
+\begin_inset Quotes erd
+\end_inset
+
+.
+ If your text class depends on several packages, you can declare it as:
+\end_layout
+
+\begin_layout LyX-Code
+
+\size small
+#% Do not delete the line below; configure depends on this
+\end_layout
+
+\begin_layout LyX-Code
+
+\size small
+#
+\backslash
+DeclareLaTeXClass[article,foo.sty]{article (with my own headings)}
+\end_layout
+
+\begin_layout Standard
+This indicates that your text class uses the foo.sty package.
+ Finally, it is also possible to declare classes for DocBook code.
+ Typical declarations will look like
+\end_layout
+
+\begin_layout LyX-Code
+
+\size small
+#% Do not delete the line below; configure depends on this
+\end_layout
+
+\begin_layout LyX-Code
+
+\size small
+#
+\backslash
+DeclareDocBookClass[article]{SGML (DocBook article)}
+\end_layout
+
+\begin_layout Standard
+Note that these declarations can also be given an optional parameter declaring
+ the name of the document class (but not a list).
+\end_layout
+
+\begin_layout Standard
+So, to be as explicit as possible, the form of the layout declaration is:
+\end_layout
+
+\begin_layout LyX-Code
+
+\size small
+#
+\backslash
+DeclareLaTeXClass[class,package.sty]{layout description}
+\end_layout
+
+\begin_layout Standard
+The class need only be specified if the name of the LaTeX class file and
+ the name of the layout file are different; if the name of the class file
+ is not specified, then LyX will simply assume that it is the same as the
+ name of the layout file.
+\end_layout
+
+\begin_layout Standard
+When the text class has been modified to your taste, all you have to do
+ is to copy it either to
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+LyXDir/layouts/
+\end_layout
+
+\end_inset
+
+ or to
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+UserDir/layouts
+\end_layout
+
+\end_inset
+
+, run
+\begin_inset Flex CharStyle:MenuItem
+status collapsed
+
+\begin_layout Plain Layout
+Tools\SpecialChar \menuseparator
+Reconfigure
+\end_layout
+
+\end_inset
+
+, exit LyX and restart it.
+ Then your new text class should be available along with the others.
+\end_layout
+
+\begin_layout Standard
+In versions of LyX prior to 1.6, you had to restart LyX to see any changes
+ you made to your layout files.
+ As a result, editing layout files could be very time consuming.
+ Beginning with 1.6, however, you can force a reload of the layout currently
+ in use by using the LyX function
+\begin_inset Flex CharStyle:MenuItem
+status collapsed
+
+\begin_layout Plain Layout
+layout-reload
+\end_layout
+
+\end_inset
+
+.
+ There is no default binding for this function—though, of course, you can
+ bind it to a key yourself.
+ If you want to use this function, then, you should simply enter it in the
+ mini-buffer.
+
+\emph on
+Warning
+\emph default
+: This is very much an `advanced feature'.
+ It is
+\emph on
+strongly
+\emph default
+ recommended that you save your work before using this function.
+ In fact, it is
+\emph on
+strongly
+\emph default
+ recommended that you not attempt to edit your layout while simultaneously
+ working on a document that you care about.
+ Use a test document.
+ Syntax errors and the like in your layout file could cause peculiar behavior.
+ In particular, such errors could cause LyX to regard the current layout
+ as invalid and to attempt to switch to some other layout.
+ The LyX team strives to keep LyX stable in such situations, but safe is
+ better than sorry.
+\end_layout
+
+\begin_layout Subsection
+File format
+\end_layout
+
+\begin_layout Standard
+The first non-comment line must contain the file format number:
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Format
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+int
+\end_layout
+
+\end_inset
+
+] This tag was introduced with LyX 1.4.0 (layout files of LyX 1.3.x and earlier
+ don't have an explicit file format).
+ The file format that is documented here is format 14.
+\end_layout
+
+\begin_layout Subsection
+General text class parameters
+\end_layout
+
+\begin_layout Standard
+These are the general parameters which describe the form of the entire document:
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+AddToPreamble
+\end_layout
+
+\end_inset
+
+ Adds information to the document preamble.
+ Must end with
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+EndPreamble
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+ClassOptions
+\end_layout
+
+\end_inset
+
+ Describes various global options supported by the document class.
+ See Section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:ClassOptions"
+
+\end_inset
+
+ for a description.
+ Must end with
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+End
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Columns
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+
+\emph on
+1
+\end_layout
+
+\end_inset
+
+,
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+2
+\end_layout
+
+\end_inset
+
+] Whether the class should default to having one or two columns.
+ Can be changed in the
+\begin_inset Flex CharStyle:MenuItem
+status collapsed
+
+\begin_layout Plain Layout
+Document\SpecialChar \menuseparator
+Settings
+\end_layout
+
+\end_inset
+
+ dialog.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Counter
+\end_layout
+
+\end_inset
+
+ This sequence defines a new counter.
+ See Section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:Counters"
+
+\end_inset
+
+ for details.
+ Must end with
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+End
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+DefaultFont
+\end_layout
+
+\end_inset
+
+ Sets the default font used to display the document.
+ See Section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:Font-description"
+
+\end_inset
+
+ for how to declare fonts.
+ Must end with
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+EndFont
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+DefaultModule
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+string]
+\end_layout
+
+\end_inset
+
+ Specifies a module to be included by default with this document class,
+ which should be specified by filename without the
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+.module
+\end_layout
+
+\end_inset
+
+ extension.
+ The user can still remove the module, but it will be active at the outset.
+ (This applies only when new files are created, or when this class is chosen
+ for an existing document.)
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+DefaultStyle
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+string
+\end_layout
+
+\end_inset
+
+] This is the style that will be assigned to new paragraphs, usually
+\begin_inset Flex CharStyle:MenuItem
+status collapsed
+
+\begin_layout Plain Layout
+Standard
+\end_layout
+
+\end_inset
+
+.
+ This will default to the first defined style if not given, but you are
+ highly encouraged to use this directive.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+ExcludesModule
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+string
+\end_layout
+
+\end_inset
+
+] Indicates that the module in question—which should be specified by filename
+ without the
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+.module
+\end_layout
+
+\end_inset
+
+ extension—cannot be used with this document class.
+ This might be used in a journal-specific layout file to prevent, say, the
+ use of the
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+theorems-sec
+\end_layout
+
+\end_inset
+
+ module that numbers theorems by section.
+ This tag may
+\emph on
+not
+\emph default
+ be used in a module.
+ Modules have their own way of excluding other modules (see
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:Layout-modules"
+
+\end_inset
+
+).
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Float
+\end_layout
+
+\end_inset
+
+ Defines a new float.
+ See Section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:Floats"
+
+\end_inset
+
+ for details.
+ Must end with
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+End
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Input
+\end_layout
+
+\end_inset
+
+ As its name implies, this command allows you to include another layout
+ definition file within yours to avoid duplicating commands.
+ Common examples are the standard layout files, for example,
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+stdclass.inc
+\end_layout
+
+\end_inset
+
+, which contains most of the basic layouts.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+InsetLayout
+\end_layout
+
+\end_inset
+
+ This section (re-)defines the layout of an inset.
+ It can be applied to an existing inset of to a new, user-defined inset,
+ e.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.
+\begin_inset space \space{}
+\end_inset
+
+a new character style.
+ See Section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:Flex-insets-and"
+
+\end_inset
+
+ for more information.
+ Must end with
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+End
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+LeftMargin
+\end_layout
+
+\end_inset
+
+ A string that indicates the width of the left margin on the screen, for
+ example,
+\begin_inset Quotes eld
+\end_inset
+
+MMMMM
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+NoFloat
+\end_layout
+
+\end_inset
+
+ This command deletes an existing float.
+ This is particularly useful when you want to suppress a float that has
+ be defined in an input file.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+NoStyle
+\end_layout
+
+\end_inset
+
+ This command deletes an existing style.
+ This is particularly useful when you want to suppress a style that has
+ be defined in an input file.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+OutputType
+\end_layout
+
+\end_inset
+
+ A string indicating what sort of output documents using this class will
+ produce.
+ At present, the options are: `docbook', `latex', and `literate'.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+
+\series medium
+PageStyle
+\end_layout
+
+\end_inset
+
+ [
+\emph on
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+
+\emph on
+plain
+\end_layout
+
+\end_inset
+
+
+\emph default
+,
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+empty
+\end_layout
+
+\end_inset
+
+,
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+headings
+\end_layout
+
+\end_inset
+
+] The class default pagestyle.
+ Can be changed in the
+\begin_inset Flex CharStyle:MenuItem
+status collapsed
+
+\begin_layout Plain Layout
+Document\SpecialChar \menuseparator
+Settings
+\end_layout
+
+\end_inset
+
+ dialog.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Preamble
+\end_layout
+
+\end_inset
+
+ Sets the preamble for the LaTeX document.
+ Note that this will completely override any prior
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Preamble
+\end_layout
+
+\end_inset
+
+ or
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+AddToPreamble
+\end_layout
+
+\end_inset
+
+ declarations.
+ Must end with
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+EndPreamble
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Provides
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+string
+\end_layout
+
+\end_inset
+
+] [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+
+\emph on
+0
+\end_layout
+
+\end_inset
+
+,
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+1
+\end_layout
+
+\end_inset
+
+] Whether the class already provides the feature
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+string
+\end_layout
+
+\end_inset
+
+.
+ A feature is in general the name of a package (
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+amsmath
+\end_layout
+
+\end_inset
+
+,
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+makeidx
+\end_layout
+
+\end_inset
+
+, \SpecialChar \ldots{}
+) or a macro (
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+url
+\end_layout
+
+\end_inset
+
+,
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+boldsymbol
+\end_layout
+
+\end_inset
+
+,\SpecialChar \ldots{}
+); the complete list of supported features is unfortunately not documented
+ outside the LyX source code—but see
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+LaTeXFeatures.cpp
+\end_layout
+
+\end_inset
+
+ if you're interested.
+
+\begin_inset Flex CharStyle:MenuItem
+status collapsed
+
+\begin_layout Plain Layout
+Help\SpecialChar \menuseparator
+LaTeX Configuration
+\end_layout
+
+\end_inset
+
+ also gives an overview of the supported packages.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+ProvidesModule
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+string
+\end_layout
+
+\end_inset
+
+] Indicates that this layout provides the functionality of the module mentioned,
+ which should be specified by the filename without the
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+.module
+\end_layout
+
+\end_inset
+
+ extension.
+ This will typically be used if the layout includes the module directly,
+ rather than using the
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+DefaultModule
+\end_layout
+
+\end_inset
+
+ tag to indicate that it ought to be used.
+ It could be used in a module that provided an alternate implementation
+ of the same functionality.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Requires
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+string
+\end_layout
+
+\end_inset
+
+] Whether the class requires the feature
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+string
+\end_layout
+
+\end_inset
+
+.
+ Multiple features must be separated by commas.
+ Note that you can only request supported features.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+RightMargin
+\end_layout
+
+\end_inset
+
+ A string that indicates the width of the right margin on the screen, for
+ example,
+\begin_inset Quotes eld
+\end_inset
+
+MMMMM
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+SecNumDepth
+\end_layout
+
+\end_inset
+
+ Sets which divisions get numbered.
+ Corresponds to the
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+secnumdepth
+\end_layout
+
+\end_inset
+
+ counter in LaTeX.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Sides
+\end_layout
+
+\end_inset
+
+ [
+\emph on
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+
+\emph on
+1
+\end_layout
+
+\end_inset
+
+
+\emph default
+,
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+2
+\end_layout
+
+\end_inset
+
+] Whether the class-default should be printing on one or both sides of the
+ paper.
+ Can be changed in the
+\begin_inset Flex CharStyle:MenuItem
+status collapsed
+
+\begin_layout Plain Layout
+Document\SpecialChar \menuseparator
+Settings
+\end_layout
+
+\end_inset
+
+ dialog.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Style
+\end_layout
+
+\end_inset
+
+ This sequence defines a new paragraph style.
+ If the style already exists, it will redefine some of its parameters instead.
+ See Section
+\begin_inset space ~
+\end_inset
+
+
+\begin_inset CommandInset ref
+LatexCommand ref
+reference "sub:Paragraph-Styles"
+
+\end_inset
+
+ for details.
+ Must end with
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+End
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+TitleLatexName
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+string="maketitle"
+\end_layout
+
+\end_inset
+
+] The name of the command or environment to be used with
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+TitleLatexType
+\end_layout
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+TitleLatexType
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+
+\emph on
+CommandAfter
+\end_layout
+
+\end_inset
+
+,
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Environment
+\end_layout
+
+\end_inset
+
+] Indicates what kind of markup is used to define the title of a document.
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+CommandAfter
+\end_layout
+
+\end_inset
+
+ means that the macro with name
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+TitleLatexName
+\end_layout
+
+\end_inset
+
+ will be inserted after the last layout which has
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+InTitle 1
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Environment
+\end_layout
+
+\end_inset
+
+ corresponds to the case where the block of paragraphs which have
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+InTitle 1
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+ should be enclosed into the
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+TitleLatexName
+\end_layout
+
+\end_inset
+
+ environment.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+TocDepth
+\end_layout
+
+\end_inset
+
+ Sets which divisions are included in the table of contents.
+ Corresponds to the
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+tocdepth
+\end_layout
+
+\end_inset
+
+ counter in LaTeX.
+\end_layout
+
+\begin_layout Subsection
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+ClassOptions
+\end_layout
+
+\end_inset
+
+ section
+\begin_inset CommandInset label
+LatexCommand label
+name "sub:ClassOptions"
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+The
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+ClassOptions
+\end_layout
+
+\end_inset
+
+ section can contain the following entries:
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+FontSize
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+string="10|11|12"
+\end_layout
+
+\end_inset
+
+] The list of available font sizes for the document's main font, separated
+ by
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+|
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Header
+\end_layout
+
+\end_inset
+
+ Used to set the DTD line with XML-based output classes.
+ E.
+\begin_inset space \thinspace{}
+\end_inset
+
+g.: PUBLIC
+\begin_inset Quotes eld
+\end_inset
+
+-//OASIS//DTD DocBook V4.2//EN
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+PageStyle
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+string="empty|plain|headings|fancy"
+\end_layout
+
+\end_inset
+
+] The list of available page styles, separated by
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+|
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Other
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+string=""
+\end_layout
+
+\end_inset
+
+] Some document class options, separated by a comma, that will be added
+ to the optional part of the
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+
+\backslash
+documentclass
+\end_layout
+
+\end_inset
+
+ command.
+\end_layout
+
+\begin_layout Standard
+The
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+ClassOptions
+\end_layout
+
+\end_inset
+
+ section must end with
+\begin_inset Quotes eld
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+End
+\end_layout
+
+\end_inset
+
+
+\begin_inset Quotes erd
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Subsection
+Paragraph Styles
+\begin_inset CommandInset label
+LatexCommand label
+name "sub:Paragraph-Styles"
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+A paragraph style description looks like this:
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+Note that this will either define a new layout or modify an existing one.
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout LyX-Code
+Style
+\family roman
+\emph on
+name
+\end_layout
+
+\begin_layout LyX-Code
+ ...
+\end_layout
+
+\begin_layout LyX-Code
+End
+\end_layout
+
+\begin_layout Standard
+where the following commands are allowed:
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Align
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+
+\emph on
+block
+\emph default
+, left, right, center
+\end_layout
+
+\end_inset
+
+] Paragraph alignment.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+AlignPossible
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+
+\emph on
+block
+\emph default
+, left, right, center
+\end_layout
+
+\end_inset
+
+] A comma separated list of permitted alignments.
+ (Some LaTeX styles prohibit certain alignments, since those wouldn't make
+ sense.
+ For example a right-aligned or centered enumeration isn't possible.)
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+BottomSep
+\end_layout
+
+\end_inset
+
+ [
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+float=0
+\end_layout
+
+\end_inset
+
+]
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+Note that a `float' here is a real number, such as: 1.5.
+\end_layout
+
+\end_inset
+
+ The vertical space with which the last of a chain of paragraphs with this
+ layout is separated from the following paragraph.
+ If the next paragraph has another layout, the separations are not simply
+ added, but the maximum is taken.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+Category
+\end_layout
+
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+[string]
+\end_layout
+
+\end_inset
+
+ The category for this style.
+ This is used to group related styles in the Layout combobox on the toolbar.
+ Any string can be used, but you may want to use existing categories with
+ your own styles.
+
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+CommandDepth
+\end_layout
+
+\end_inset
+
+ Depth of XML command.
+ Used only with XML-type formats.
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+CopyStyle
+\end_layout
+
+\end_inset
+
+
+\begin_inset CommandInset label
+LatexCommand label
+name "des:CopyStyle"
+
+\end_inset
+
+
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+[string]
+\end_layout
+
+\end_inset
+
+ Copies all the features of an existing style into the current one.
+
+\end_layout
+
+\begin_layout Description
+\begin_inset Flex CharStyle:Code
+status collapsed
+
+\begin_layout Plain Layout
+DependsOn
+\end_layout
+
+\end_inset
+
+ The name of a style whose preamble should be output
+\emph on
+before
+\emph default
+ this one.
+ This allows to ensure some ordering of the preamble snippets when macros
+ definitions depend on one another.
+\begin_inset Foot
+status collapsed
+
+\begin_layout Plain Layout
+Note that, besides that functionality, there is no way to ensure any ordering
+ of preambles.
+ The ordering that you see in a given version of LyX may change without
+ warning in later versions.
+\end_layout
+
+\end_inset
+
+