ws change

[lyx.git] / INSTALL

diff --git a/INSTALL b/INSTALL
index dfc1a8b50975013a57db21e40b69dd4830a6d0bf..075d5e4a3d714b4692e04214045340eb0e3b7f4f 100644 (file)
--- a/INSTALL
+++ b/INSTALL
@@ -1,11 +1,3 @@
-Note for CVS checkouts
-----------------------
-
-If you have checked this out from CVS, you need to have
-automake, autoconf, and gettext installed.  Then,
-type "./autogen.sh" to build the needed configuration
-files and proceed as stated below.
-

 Compiling and installing LyX
 ============================
 
 Compiling and installing LyX
 ============================
 


@@ -28,18 +20,42 @@ These four steps will compile, test and install LyX:
            if you want a smaller binary. 
 
 
            if you want a smaller binary. 
 
 

+Note for CVS checkouts
+----------------------
+
+If you have checked this out from CVS, you need to have
+automake, autoconf, and gettext installed.  Then,
+type "./autogen.sh" to build the needed configuration
+files and proceed as stated below.
+
+You will also probably need GNU m4 (perhaps installed as gm4).
+ 

 Requirements
 ------------
 
 Requirements
 ------------
 

-You will need to have both an Xforms library and Xpm library to compile 
-LyX.  It is imperative that you have the correct versions of these 
+First of all, you will also need a recent C++ compiler, where recent
+means that the compilers are close to C++ standard conforming.
+Compilers that are known to compile LyX are egcs 1.1.x, gcc 2.95.x and
+later, and Digital C++ version 6.1 and later. Please tell us your
+experience with other compilers. It is _not_ possible to compile LyX
+with gcc 2.7.x and 2.8.x, and this is not likely to change in the
+future.
+
+Note that, contrary to LyX 1.0.x, LyX 1.2.x makes great use of C++
+Standard Template Library (STL); this means that gcc users will have
+to install the relevant libstdc++ library to be able to compile this
+version.
+
+Both an Xforms and Xpm libraries should be installed to compile LyX.
+It is imperative that you have the correct versions of these

 libraries, and their associated header files.
 
 libraries, and their associated header files.
 

-As of LyX version 1.1.5, you will need to have Xforms library and header
-version 0.88 or 0.89.  Version 0.88 is a stable release and the
-recommended version.  On some systems, such as linux ELF, there are shared 
-library versions of the Xforms library, which require an installation step 
-to configure the system.
+As of LyX version 1.2.0, you will need to have Xforms library and
+header version 0.88 or 0.89. Version 0.89.6 is the one which works
+best, but the old stable 0.88.1 version is still supported. On some
+systems, such as linux ELF, there are shared library versions of the
+Xforms library, which require an installation step to configure the
+system.

 
 Xforms is available (free) only in binary format, source code is not
 available.  If it is not available for your machine, contact the Xforms
 
 Xforms is available (free) only in binary format, source code is not
 available.  If it is not available for your machine, contact the Xforms


@@ -51,36 +67,29 @@ developers to request a version for your system.  You can get it from
     ftp://ftp.fu-berlin.de/unix/X11/gui/xforms
     ftp://ftp.cs.ruu.nl/pub/XFORMS/
 
     ftp://ftp.fu-berlin.de/unix/X11/gui/xforms
     ftp://ftp.cs.ruu.nl/pub/XFORMS/
 

-In addition, you must have libXpm version 4.7 (or newer; 4.8 rumoured
-to work).
-
-libXpm can be found at:
-           http://www.funet.fi/pub/Linux/sunsite/X11/libs/!INDEX.html
-           (or similar locations at other sunsites like sunsite.unc.edu)
-
-You will also need a recent C++ compiler, where recent means that the
-compilers are close to C++ standard conforming. Compilers that are
-known to compile LyX are gcc 2.8.1 and 2.95.x, the various versions of
-egcs and Digital C++ version 6.1. Please tell us your experience with
-other compilers. It is _not_ possible to compile LyX with gcc 2.7.x,
-and this is not likely to change in the future.
+If you use a rpm-based linux distribution, such as RedHat or Mandrake,
+we recommend that you grab a version of xforms from
+  ftp://ftp.lyx.org/pub/lyx/contrib 
+as the rpm packages commonly found are compiled against glibc 2.0
+instead of 2.[12], and this causes occasional crashes.

 
 

-Note that, contrary to LyX 1.0.x, LyX 1.1.x makes great use of C++
-Standard Template Library (STL); this means that gcc users will have
-to install the relevant libstdc++ library to be able to compile this
-version.
+In addition, you must have libXpm version 4.7 or newer.

 
 

-If you make modifications to files in src/ (for example by applying a 
-patch), you will need to have the GNU gettext package installed, due to 
-some dependencies in the makefiles. You can find the latest (alpha) 
-version from:
+If you make modifications to files in src/ (for example by applying a
+patch), you will need to have the GNU gettext package installed, due
+to some dependencies in the makefiles. You can find the latest version
+from:

 
 

-    ftp://alpha.gnu.org/gnu/gettext-0.10.xx.tar.gz.
+    ftp://ftp.gnu.org/gnu/gettext-0.10.xx.tar.gz.

 
 LyX contains a hack to work around this, but you should not rely too
 much on it.
 
 
 LyX contains a hack to work around this, but you should not rely too
 much on it.
 

+To use the thesaurus, you will need to install libAikSaurus, available
+from :

 
 

+    http://aiken.clan11.com/aiksaurus/ 
+ 

 Finally, the two following programs should be available at
 configuration time:
 
 Finally, the two following programs should be available at
 configuration time:
 


@@ -91,9 +100,9 @@ configuration time:
     the machine on which LyX is built is not the one where it will
     run). 
 
     the machine on which LyX is built is not the one where it will
     run). 
 

-  o LaTeX2e should be correctly setup for the user you are logged
+  o LaTeX2e should be correctly setup for the user you are logged in

     as. Otherwise, LyX will not be able to run a number of tests. Note
     as. Otherwise, LyX will not be able to run a number of tests. Note

-    that users can run these tests manually with Option->Configure.
+    that users can run these tests manually with Edit>Reconfigure.

 
 
 Creating the Makefile
 
 
 Creating the Makefile


@@ -122,14 +131,22 @@ flags:
        --with-extra-lib=DIRECTORY/lib --with-extra-inc=DIRECTORY/include
     If DIRECTORY is not specified, the current prefix is used.
 
        --with-extra-lib=DIRECTORY/lib --with-extra-inc=DIRECTORY/include
     If DIRECTORY is not specified, the current prefix is used.
 

-  o --with-lyx-suffix=STRING adds the given suffix to the names of the 
-    LyX binary and scripts, and the library directory. For example,
-    "--with-lyx-suffix=1.1.6" would install a binary "lyx-1.1.6", and
-    create a directory "/usr/share/lyx-1.1.6", install "reLyX-1.1.6" etc.
-    Additionally, LyX will look for the user configuration file in e.g.
-    "$HOME/.lyx-1.1.6". This feature is useful for installing more than
-    one version of LyX on the same machine.
+  o --with-version-suffix will install LyX as lyx-<version>, e.g. lyx-1.2.0
+    The LyX data directory will be something like <whatever>/lyx-1.2.0/.
+    Additionally your user configuration files will be found in e.g.
+    $HOME/.lyx-1.2.0

 
 

+    You can use this feature to install more than one version of LyX on
+    the same system. You can optionally specify a "version" of your own,
+    by doing something like : ./configure --with-version-suffix=-latestcvs
+
+  o --enable-optimization=VALUE enables you to set optimization to a
+    higher level as the default (-O), for example --enable-optimization=-O3.
+
+  o --disable-optimization - you can use this to disable compiler
+    optimization of LyX. The compile may be much quicker with some
+    compilers, but LyX will run more slowly. 
+ 

 There are also flags to control the internationalization support in
 LyX:
 
 There are also flags to control the internationalization support in
 LyX:
 


@@ -153,8 +170,7 @@ LyX:
 Moreover, the following generic configure flags may be useful:
 
   o --prefix=DIRECTORY specifies the root directory to use for
 Moreover, the following generic configure flags may be useful:
 
   o --prefix=DIRECTORY specifies the root directory to use for

-    installation. [defaults to where lyx has already been installed or
-    /usr/local]
+    installation. [defaults to /usr/local]

 
   o --datadir=DIRECTORY gives the directory where all extra LyX 
     files (lyxrc example, documentation, templates and layouts
 
   o --datadir=DIRECTORY gives the directory where all extra LyX 
     files (lyxrc example, documentation, templates and layouts


@@ -186,11 +202,11 @@ this file.
 In particular, the following options could be useful in some
 desperate cases:
 
 In particular, the following options could be useful in some
 desperate cases:
 

-  o --with-warnings that make the compiler output more warnings during
-    the compilation of LyX.  Opposite is --without-warnings.  By default,
+  o --enable-warnings that make the compiler output more warnings during
+    the compilation of LyX.  Opposite is --disable-warnings.  By default,

     this flag is on for development versions only.
 
     this flag is on for development versions only.
 

-  o --enable-assertions that make the compilier generater run-time
+  o --enable-assertions that make the compiler generate run-time

     code which checks that some variables have sane values. Opposite
     is --disable-assertions.  By default, this flag is on for
     development versions only. 
     code which checks that some variables have sane values. Opposite
     is --disable-assertions.  By default, this flag is on for
     development versions only. 


@@ -205,7 +221,7 @@ desperate cases:
     flag, please report it as a bug. 
 
   o --without-liberty suppresses the detection of the -liberty library
     flag, please report it as a bug. 
 
   o --without-liberty suppresses the detection of the -liberty library

-    (see the section 'Problems').
+    (see the section `Problems').

 
 
 Compiling and installing LyX
 
 
 Compiling and installing LyX


@@ -219,7 +235,7 @@ Once you've got the Makefile created, you just have to type:
 All should be OK ;)
 
 Since the binaries with debug information tend to be huge (although
 All should be OK ;)
 
 Since the binaries with debug information tend to be huge (although

-this does not affect the run-time memory footprint), you maight want
+this does not affect the run-time memory footprint), you might want

 to strip the lyx binary. In this case replace "make install" with
 
   make install-strip
 to strip the lyx binary. In this case replace "make install" with
 
   make install-strip


@@ -254,15 +270,9 @@ Preparing a binary distribution for the use of others
 ------------------------------------------------------
 
   o Compile LyX with the right compiler switches for your
 ------------------------------------------------------
 
   o Compile LyX with the right compiler switches for your

-    architecture. In particular you might want to ensure that
-    libraries like xforms and xpm are statically linked. To this end,
-    you can use a command like
-
-                make LYX_LIBS='/foo/libforms.a /bar/libXpm.a'
-
-    Moreover, make sure you use the --without-latex-config switch
+    architecture. Make sure you use the --without-latex-config switch

     of configure, since others might not be interested by your
     of configure, since others might not be interested by your

-   configuration :-) 
+    configuration :-) 

 
   o Create a file README.bin describing your distribution and
     referring to *you* if problems arise. As a model, you can use the 
 
   o Create a file README.bin describing your distribution and
     referring to *you* if problems arise. As a model, you can use the 


@@ -296,7 +306,7 @@ notify us.
   o Configure will seemingly fail to find xpm.h and forms.h on linux
     if the kernel headers are not available. Two cases are possible: 
 
   o Configure will seemingly fail to find xpm.h and forms.h on linux
     if the kernel headers are not available. Two cases are possible: 
 

-      - you have not installed the kernel sources. The you should
+      - you have not installed the kernel sources. Then you should

         install them or at least the kernel-headers package (or
         whatever it is called in your distribution).
 
         install them or at least the kernel-headers package (or
         whatever it is called in your distribution).
 


@@ -305,6 +315,10 @@ notify us.
        are needed for compilation). A 'make symlinks' in linux kernel
        sources fixes that. 
 
        are needed for compilation). A 'make symlinks' in linux kernel
        sources fixes that. 
 

+  o if you are using RedHat Linux 7.x, you must make sure you have the
+    latest updated gcc and related packages installed (at least -85),
+    or LyX will not compile or will be mis-compiled.
+ 

   o if you get an error message when compiling LyX that looks like this :
 
     ../../src/minibuffer.h:17: using directive `Object' introduced
   o if you get an error message when compiling LyX that looks like this :
 
     ../../src/minibuffer.h:17: using directive `Object' introduced


@@ -313,27 +327,6 @@ notify us.
     then you need to upgrade the version of the xforms library you have
     installed.
 
     then you need to upgrade the version of the xforms library you have
     installed.
 

-  o If you are using RedHat 7.0 and the option --with-frontend=kde, you
-    will need to configure LyX as follows :
-
-       export QTDIR=/usr/lib/qt-1.45
-       export CC="egcs -L/usr/lib"
-       export CXX="egcs++ -L/usr/lib"
-       ./configure --with-frontend=kde 
-
-    If you your version of gcc-c++ is > 2.96-69, you may not need to do
-    this.
-
-  o If you have GNU gettext installed on your system (e.g. on linux),
-    you may get tons of warnings like:
-
-    bullet_forms.C:101: warning: passing `char *' to argument 1 of
-    `__builtin_constant_p(int)' lacks a cast
-
-    These are in harmless warnings caused by a bug in libintl.h, but
-    will be solved if you use --with-included-gettext when configuring
-    LyX.
-

   o It is possible to compile lyx with Tru64 Unix cxx compiler
     version 6.2, provided one uses
        CXX='cxx -std strict_ansi'
   o It is possible to compile lyx with Tru64 Unix cxx compiler
     version 6.2, provided one uses
        CXX='cxx -std strict_ansi'


@@ -344,29 +337,36 @@ notify us.
     repository, due to the tricks used by automake for dependencies. Ask
     Jean-Marc.Lasgouttes@inria.fr for a workaround.
 
     repository, due to the tricks used by automake for dependencies. Ask
     Jean-Marc.Lasgouttes@inria.fr for a workaround.
 

+    Or rather, it may well work if you are using automake 1.5 and autoconf 2.5
+    or greater, but you'll have to patch automake's depcomp first. (Depcomp
+    is a little shell script to automagically work out file dependencies
+    and it's broken for automake 1.5 and Tru64 :-(). The patch is to be found
+    in config/depcomp.diff.
+    Angus 22 March, 2002.
+

   o On Tru64 Unix, you may have to compile with
     --with-included-string to work around a Tru64 linker limitation
     (the STL string template creates names which may be too long). We
   o On Tru64 Unix, you may have to compile with
     --with-included-string to work around a Tru64 linker limitation
     (the STL string template creates names which may be too long). We

-    also had reports that it helps with gcc 2.95.2 on solaris 2.6. 
+    also had reports that it helps with gcc 2.95.2 on solaris 2.6.
+
+    Using Tru64 Unix 4.0e, the std::string is fine.
+    Angus 22 March, 2002.

 
   o On Tru64 Unix with cxx, you may have a compilation error in
     lyx_main.C if you have GNU gettext installed. This is due to a bug
     in gettext. To solve this, you can either (1) configure with
     --with-included-gettext or (2) add -D__STDC__ to cxx flags.
 
 
   o On Tru64 Unix with cxx, you may have a compilation error in
     lyx_main.C if you have GNU gettext installed. This is due to a bug
     in gettext. To solve this, you can either (1) configure with
     --with-included-gettext or (2) add -D__STDC__ to cxx flags.
 

-  o According to John Collins <collins@phys.psu.edu>, on SunOS 4.1.3 you may 
-    find two sets of X libraries, and they are of course incompatible :-)
-    One is the set provided as part of OpenWindows, and one is the standard
-    X distribution (e.g., X11R5).  If you encounter problems (or if, for
-    some obscure reasons configure cannot find your X libraries) you can
-    use the following options:
+  o On Tru64 Unix 4.0e, the STL library routine std::count is broken
+    (/usr/include/cxx/algorithm.cc, line 289 on my machine).
+    It calculates "n" but does not return it! The fix is to add "return n;" to
+    the end of the (4-line long) routine.
+    Angus 22 March, 2002.

 
 

-     o --x-libraries=DIRECTORY that indicates where the X libraries reside.
-
-     o --x-includes=DIRECTORY that indicate where the X include files reside.
-
-    The standard X11R5 libraries should work when the OpenWindows ones
-    don't.
+  o On Tru64 Unix 4.0e, compilation of support/lyxsum.C dies horribly. The
+    work-around is to use the old version, 1.18, of this routine. Ask
+    Angus Leeming <leeming@lyx.org> for details.
+    Angus 22 March, 2002.

 
   o Some systems lack functions that LyX needs.  To fix this, configure
     tries to link against the -liberty library, if it is available. 
 
   o Some systems lack functions that LyX needs.  To fix this, configure
     tries to link against the -liberty library, if it is available. 


@@ -390,19 +390,3 @@ notify us.
     LDFLAGS = -L/opt/aCC/lib # perhaps not needed. 
 
 
     LDFLAGS = -L/opt/aCC/lib # perhaps not needed. 
 
 

-  o On Digital Unix with gcc, you can get warnings like
-
-warning, LyXFamilyNames not found in original or external symbol tables, value defaults to 0
-
-    These concern symbols beginning with an uppercase letter and seems
-    to be harmless. Similarly, the compilation can end with the
-    following warning:
-
-/bin/ld:
-Warning: Linking some objects which contain exception information sections
-        and some which do not. This may cause fatal runtime exception handling
-        problems (last obj encountered without exceptions was ../intl/libintl.a).
-
-
-    You can safely ignore it. 
-