2 * \file output_latex.cpp
3 * This file is part of LyX, the document processor.
4 * Licence details can be found in the file COPYING.
6 * \author Lars Gullik Bjønnes
8 * Full author contact details are available in file CREDITS.
13 #include "output_latex.h"
16 #include "BufferParams.h"
19 #include "InsetList.h"
23 #include "OutputParams.h"
24 #include "Paragraph.h"
25 #include "ParagraphParameters.h"
26 #include "texstream.h"
27 #include "TextClass.h"
29 #include "insets/InsetBibitem.h"
30 #include "insets/InsetArgument.h"
32 #include "frontends/alert.h"
34 #include "support/lassert.h"
35 #include "support/convert.h"
36 #include "support/debug.h"
37 #include "support/lstrings.h"
38 #include "support/lyxalgo.h"
39 #include "support/textutils.h"
40 #include "support/gettext.h"
42 #include <QThreadStorage>
48 using namespace lyx::support;
64 OutputState() : open_encoding_(none), cjk_inherited_(0),
65 prev_env_language_(0), nest_level_(0)
68 OpenEncoding open_encoding_;
70 Language const * prev_env_language_;
72 stack<int> lang_switch_depth_; // Both are always empty when
73 stack<string> open_polyglossia_lang_; // not using polyglossia
77 OutputState * getOutputState()
79 // FIXME An instance of OutputState should be kept around for each export
80 // instead of using local thread storage
81 static QThreadStorage<OutputState *> outputstate;
82 if (!outputstate.hasLocalData())
83 outputstate.setLocalData(new OutputState);
84 return outputstate.localData();
88 string const & openLanguageName(OutputState const * state)
90 // Return a reference to the last active language opened with
91 // polyglossia or when using begin/end commands. If none or when
92 // using babel with only a begin command, return a reference to
95 static string const empty;
97 return state->open_polyglossia_lang_.empty()
99 : state->open_polyglossia_lang_.top();
103 bool atSameLastLangSwitchDepth(OutputState const * state)
105 // Return true if the actual nest level is the same at which the
106 // language was switched when using polyglossia or begin/end
107 // commands. Instead, return always true when using babel with
108 // only a begin command.
110 return state->lang_switch_depth_.size() == 0
112 : abs(state->lang_switch_depth_.top()) == state->nest_level_;
116 bool isLocalSwitch(OutputState const * state)
118 // Return true if the language was opened by a local command switch.
120 return state->lang_switch_depth_.size()
121 && state->lang_switch_depth_.top() < 0;
125 bool langOpenedAtThisLevel(OutputState const * state)
127 // Return true if the language was opened at the current nesting level.
129 return state->lang_switch_depth_.size()
130 && abs(state->lang_switch_depth_.top()) == state->nest_level_;
134 string const getPolyglossiaEnvName(Language const * lang)
136 string result = lang->polyglossia();
137 if (result == "arabic")
138 // exceptional spelling; see polyglossia docs.
144 string const getPolyglossiaBegin(string const & lang_begin_command,
145 string const & lang, string const & opts,
146 bool const localswitch = false)
150 // we need to revert the upcasing done in getPolyglossiaEnvName()
151 // in case we have a local polyglossia command (\textarabic).
152 string language = localswitch ? ascii_lowercase(lang) : lang;
153 result = subst(lang_begin_command, "$$lang", language);
155 string options = opts.empty() ?
156 string() : "[" + opts + "]";
157 result = subst(result, "$$opts", options);
163 struct TeXEnvironmentData
166 Layout const * style;
167 Language const * par_language;
168 Encoding const * prev_encoding;
169 bool leftindent_open;
173 static TeXEnvironmentData prepareEnvironment(Buffer const & buf,
175 ParagraphList::const_iterator pit,
177 OutputParams const & runparams)
179 TeXEnvironmentData data;
181 BufferParams const & bparams = buf.params();
183 // FIXME This test should not be necessary.
184 // We should perhaps issue an error if it is.
185 Layout const & style = text.inset().forcePlainLayout() ?
186 bparams.documentClass().plainLayout() : pit->layout();
188 ParagraphList const & paragraphs = text.paragraphs();
189 ParagraphList::const_iterator const priorpit =
190 pit == paragraphs.begin() ? pit : prev(pit, 1);
192 OutputState * state = getOutputState();
193 bool const use_prev_env_language = state->prev_env_language_ != 0
194 && priorpit->layout().isEnvironment()
195 && (priorpit->getDepth() > pit->getDepth()
196 || (priorpit->getDepth() == pit->getDepth()
197 && priorpit->layout() != pit->layout()));
199 data.prev_encoding = runparams.encoding;
200 data.par_language = pit->getParLanguage(bparams);
201 Language const * const doc_language = bparams.language;
202 Language const * const prev_par_language =
203 (pit != paragraphs.begin())
204 ? (use_prev_env_language ? state->prev_env_language_
205 : priorpit->getParLanguage(bparams))
208 bool const use_polyglossia = runparams.use_polyglossia;
209 string const par_lang = use_polyglossia ?
210 getPolyglossiaEnvName(data.par_language) : data.par_language->babel();
211 string const prev_par_lang = use_polyglossia ?
212 getPolyglossiaEnvName(prev_par_language) : prev_par_language->babel();
213 string const doc_lang = use_polyglossia ?
214 getPolyglossiaEnvName(doc_language) : doc_language->babel();
215 string const lang_begin_command = use_polyglossia ?
216 "\\begin{$$lang}" : lyxrc.language_command_begin;
217 string const lang_end_command = use_polyglossia ?
218 "\\end{$$lang}" : lyxrc.language_command_end;
219 bool const using_begin_end = use_polyglossia ||
220 !lang_end_command.empty();
222 // For polyglossia, switch language outside of environment, if possible.
223 if (par_lang != prev_par_lang) {
224 if ((!using_begin_end || langOpenedAtThisLevel(state)) &&
225 !lang_end_command.empty() &&
226 prev_par_lang != doc_lang &&
227 !prev_par_lang.empty()) {
228 os << from_ascii(subst(
232 // the '%' is necessary to prevent unwanted whitespace
238 // If no language was explicitly opened and we are using
239 // polyglossia or begin/end commands, then the current
240 // language is the document language.
241 string const & cur_lang = using_begin_end
242 && state->lang_switch_depth_.size()
243 ? openLanguageName(state)
246 if ((lang_end_command.empty() ||
247 par_lang != doc_lang ||
248 par_lang != cur_lang) &&
250 string bc = use_polyglossia ?
251 getPolyglossiaBegin(lang_begin_command, par_lang,
252 data.par_language->polyglossiaOpts())
253 : subst(lang_begin_command, "$$lang", par_lang);
255 // the '%' is necessary to prevent unwanted whitespace
258 pushLanguageName(par_lang);
262 data.leftindent_open = false;
263 if (!pit->params().leftIndent().zero()) {
264 os << "\\begin{LyXParagraphLeftIndent}{"
265 << from_ascii(pit->params().leftIndent().asLatexString())
267 data.leftindent_open = true;
270 if (style.isEnvironment())
271 state->nest_level_ += 1;
273 if (style.isEnvironment() && !style.latexname().empty()) {
274 os << "\\begin{" << from_ascii(style.latexname()) << '}';
275 if (!style.latexargs().empty()) {
276 OutputParams rp = runparams;
277 rp.local_font = &pit->getFirstFontSettings(bparams);
278 latexArgInsets(paragraphs, pit, os, rp, style.latexargs());
280 if (style.latextype == LATEX_LIST_ENVIRONMENT) {
282 << pit->params().labelWidthString()
284 } else if (style.labeltype == LABEL_BIBLIO) {
285 if (pit->params().labelWidthString().empty())
286 os << '{' << bibitemWidest(buf, runparams) << "}\n";
289 << pit->params().labelWidthString()
292 os << from_ascii(style.latexparam()) << '\n';
293 if (style.latextype == LATEX_BIB_ENVIRONMENT
294 || style.latextype == LATEX_ITEM_ENVIRONMENT
295 || style.latextype == LATEX_LIST_ENVIRONMENT) {
296 OutputParams rp = runparams;
297 rp.local_font = &pit->getFirstFontSettings(bparams);
298 latexArgInsets(paragraphs, pit, os, rp, style.listpreamble(),
304 // in multilingual environments, the CJK tags have to be nested properly
305 data.cjk_nested = false;
306 if (data.par_language->encoding()->package() == Encoding::CJK &&
307 state->open_encoding_ != CJK && pit->isMultiLingual(bparams)) {
308 if (prev_par_language->encoding()->package() == Encoding::CJK)
309 os << "\\begin{CJK}{" << from_ascii(data.par_language->encoding()->latexName())
310 << "}{" << from_ascii(bparams.fonts_cjk) << "}%\n";
311 state->open_encoding_ = CJK;
312 data.cjk_nested = true;
318 static void finishEnvironment(otexstream & os, OutputParams const & runparams,
319 TeXEnvironmentData const & data)
321 OutputState * state = getOutputState();
322 // BufferParams const & bparams = buf.params(); // FIXME: for speedup shortcut below, would require passing of "buf" as argument
323 if (state->open_encoding_ == CJK && data.cjk_nested) {
324 // We need to close the encoding even if it does not change
325 // to do correct environment nesting
326 os << "\\end{CJK}\n";
327 state->open_encoding_ = none;
330 if (data.style->isEnvironment()) {
332 bool const using_begin_end =
333 runparams.use_polyglossia ||
334 !lyxrc.language_command_end.empty();
335 // Close any language opened at this nest level
336 if (using_begin_end) {
337 while (langOpenedAtThisLevel(state)) {
338 if (isLocalSwitch(state)) {
342 << openLanguageName(state)
348 state->nest_level_ -= 1;
349 string const & name = data.style->latexname();
351 os << "\\end{" << from_ascii(name) << "}\n";
352 state->prev_env_language_ = data.par_language;
353 if (runparams.encoding != data.prev_encoding) {
354 runparams.encoding = data.prev_encoding;
355 os << setEncoding(data.prev_encoding->iconvName());
359 if (data.leftindent_open) {
360 os << breakln << "\\end{LyXParagraphLeftIndent}\n";
361 state->prev_env_language_ = data.par_language;
362 if (runparams.encoding != data.prev_encoding) {
363 runparams.encoding = data.prev_encoding;
364 os << setEncoding(data.prev_encoding->iconvName());
368 // Check whether we should output a blank line after the environment
369 if (!data.style->nextnoindent)
374 void TeXEnvironment(Buffer const & buf, Text const & text,
375 OutputParams const & runparams,
376 pit_type & pit, otexstream & os)
378 ParagraphList const & paragraphs = text.paragraphs();
379 ParagraphList::const_iterator ipar = paragraphs.constIterator(pit);
380 LYXERR(Debug::LATEX, "TeXEnvironment for paragraph " << pit);
382 Layout const & current_layout = ipar->layout();
383 depth_type const current_depth = ipar->params().depth();
384 Length const & current_left_indent = ipar->params().leftIndent();
386 // This is for debugging purpose at the end.
387 pit_type const par_begin = pit;
388 for (; pit < runparams.par_end; ++pit) {
389 ParagraphList::const_iterator par = paragraphs.constIterator(pit);
391 // check first if this is an higher depth paragraph.
392 bool go_out = (par->params().depth() < current_depth);
393 if (par->params().depth() == current_depth) {
394 // This environment is finished.
395 go_out |= (par->layout() != current_layout);
396 go_out |= (par->params().leftIndent() != current_left_indent);
399 // nothing to do here, restore pit and go out.
404 if (par->layout() == current_layout
405 && par->params().depth() == current_depth
406 && par->params().leftIndent() == current_left_indent) {
407 // We are still in the same environment so TeXOnePar and continue;
408 TeXOnePar(buf, text, pit, os, runparams);
412 // We are now in a deeper environment.
413 // Either par->layout() != current_layout
414 // Or par->params().depth() > current_depth
415 // Or par->params().leftIndent() != current_left_indent)
417 // FIXME This test should not be necessary.
418 // We should perhaps issue an error if it is.
419 bool const force_plain_layout = text.inset().forcePlainLayout();
420 Layout const & style = force_plain_layout
421 ? buf.params().documentClass().plainLayout()
424 if (!style.isEnvironment()) {
425 // This is a standard paragraph, no need to call TeXEnvironment.
426 TeXOnePar(buf, text, pit, os, runparams);
430 // This is a new environment.
431 TeXEnvironmentData const data =
432 prepareEnvironment(buf, text, par, os, runparams);
433 // Recursive call to TeXEnvironment!
434 TeXEnvironment(buf, text, runparams, pit, os);
435 finishEnvironment(os, runparams, data);
438 if (pit != runparams.par_end)
439 LYXERR(Debug::LATEX, "TeXEnvironment for paragraph " << par_begin << " done.");
443 void getArgInsets(otexstream & os, OutputParams const & runparams, Layout::LaTeXArgMap const & latexargs,
444 map<int, lyx::InsetArgument const *> ilist, vector<string> required, string const & prefix)
446 unsigned int const argnr = latexargs.size();
450 // Default and preset args are always output, so if they require
451 // other arguments, consider this.
452 for (auto const & larg : latexargs) {
453 Layout::latexarg const & arg = larg.second;
454 if ((!arg.presetarg.empty() || !arg.defaultarg.empty()) && !arg.requires.empty()) {
455 vector<string> req = getVectorFromString(arg.requires);
456 required.insert(required.end(), req.begin(), req.end());
460 for (unsigned int i = 1; i <= argnr; ++i) {
461 map<int, InsetArgument const *>::const_iterator lit = ilist.find(i);
462 bool inserted = false;
463 if (lit != ilist.end()) {
464 InsetArgument const * ins = (*lit).second;
466 Layout::LaTeXArgMap::const_iterator const lait =
467 latexargs.find(ins->name());
468 if (lait != latexargs.end()) {
469 Layout::latexarg arg = (*lait).second;
473 ldelim = arg.mandatory ?
474 from_ascii("{") : from_ascii("[");
475 rdelim = arg.mandatory ?
476 from_ascii("}") : from_ascii("]");
478 if (!arg.ldelim.empty())
480 if (!arg.rdelim.empty())
482 ins->latexArgument(os, runparams, ldelim, rdelim, arg.presetarg);
483 if (prefix == "listpreamble:")
490 Layout::LaTeXArgMap::const_iterator lait = latexargs.begin();
491 Layout::LaTeXArgMap::const_iterator const laend = latexargs.end();
492 for (; lait != laend; ++lait) {
493 string const name = prefix + convert<string>(i);
494 if ((*lait).first == name) {
495 Layout::latexarg arg = (*lait).second;
496 docstring preset = arg.presetarg;
497 if (!arg.defaultarg.empty()) {
500 preset += arg.defaultarg;
503 docstring ldelim = arg.ldelim.empty() ?
504 from_ascii("{") : arg.ldelim;
505 docstring rdelim = arg.rdelim.empty() ?
506 from_ascii("}") : arg.rdelim;
507 os << ldelim << preset << rdelim;
508 } else if (!preset.empty()) {
509 docstring ldelim = arg.ldelim.empty() ?
510 from_ascii("[") : arg.ldelim;
511 docstring rdelim = arg.rdelim.empty() ?
512 from_ascii("]") : arg.rdelim;
513 os << ldelim << preset << rdelim;
514 } else if (find(required.begin(), required.end(),
515 (*lait).first) != required.end()) {
516 docstring ldelim = arg.ldelim.empty() ?
517 from_ascii("[") : arg.ldelim;
518 docstring rdelim = arg.rdelim.empty() ?
519 from_ascii("]") : arg.rdelim;
520 os << ldelim << rdelim;
533 void pushLanguageName(string const & lang_name, bool localswitch)
535 OutputState * state = getOutputState();
537 int nest_level = localswitch ? -state->nest_level_ : state->nest_level_;
538 state->lang_switch_depth_.push(nest_level);
539 state->open_polyglossia_lang_.push(lang_name);
543 void popLanguageName()
545 OutputState * state = getOutputState();
547 state->lang_switch_depth_.pop();
548 state->open_polyglossia_lang_.pop();
552 string const & openLanguageName()
554 OutputState * state = getOutputState();
556 return openLanguageName(state);
562 void addArgInsets(Paragraph const & par, string const & prefix,
563 Layout::LaTeXArgMap const & latexargs,
564 map<int, InsetArgument const *> & ilist,
565 vector<string> & required)
567 for (auto const & table : par.insetList()) {
568 InsetArgument const * arg = table.inset->asInsetArgument();
571 if (arg->name().empty()) {
572 LYXERR0("Error: Unnamed argument inset!");
575 string const name = prefix.empty() ?
576 arg->name() : split(arg->name(), ':');
577 // why converting into an integer?
578 unsigned int const nr = convert<unsigned int>(name);
579 if (ilist.find(nr) == ilist.end())
581 Layout::LaTeXArgMap::const_iterator const lit =
582 latexargs.find(arg->name());
583 if (lit != latexargs.end()) {
584 Layout::latexarg const & larg = lit->second;
585 vector<string> req = getVectorFromString(larg.requires);
586 move(req.begin(), req.end(), back_inserter(required));
594 void latexArgInsets(Paragraph const & par, otexstream & os,
595 OutputParams const & runparams,
596 Layout::LaTeXArgMap const & latexargs,
597 string const & prefix)
599 map<int, InsetArgument const *> ilist;
600 vector<string> required;
601 addArgInsets(par, prefix, latexargs, ilist, required);
602 getArgInsets(os, runparams, latexargs, ilist, required, prefix);
606 void latexArgInsets(ParagraphList const & pars,
607 ParagraphList::const_iterator pit,
608 otexstream & os, OutputParams const & runparams,
609 Layout::LaTeXArgMap const & latexargs,
610 string const & prefix)
612 map<int, InsetArgument const *> ilist;
613 vector<string> required;
615 depth_type const current_depth = pit->params().depth();
616 Layout const current_layout = pit->layout();
618 // get the first paragraph in sequence with this layout and depth
621 if (lyx::prev(pit, offset) == pars.begin())
623 ParagraphList::const_iterator priorpit = lyx::prev(pit, offset + 1);
624 if (priorpit->layout() == current_layout
625 && priorpit->params().depth() == current_depth)
631 ParagraphList::const_iterator spit = lyx::prev(pit, offset);
633 for (; spit != pars.end(); ++spit) {
634 if (spit->layout() != current_layout ||
635 spit->params().depth() < current_depth)
637 if (spit->params().depth() > current_depth)
639 addArgInsets(*spit, prefix, latexargs, ilist, required);
641 getArgInsets(os, runparams, latexargs, ilist, required, prefix);
645 void latexArgInsetsForParent(ParagraphList const & pars, otexstream & os,
646 OutputParams const & runparams,
647 Layout::LaTeXArgMap const & latexargs,
648 string const & prefix)
650 map<int, InsetArgument const *> ilist;
651 vector<string> required;
653 for (Paragraph const & par : pars) {
654 if (par.layout().hasArgs())
655 // The InsetArguments inside this paragraph refer to this paragraph
657 addArgInsets(par, prefix, latexargs, ilist, required);
659 getArgInsets(os, runparams, latexargs, ilist, required, prefix);
665 // output the proper paragraph start according to latextype.
666 void parStartCommand(Paragraph const & par, otexstream & os,
667 OutputParams const & runparams, Layout const & style)
669 switch (style.latextype) {
671 if (par.needsCProtection(runparams.moving_arg))
673 os << '\\' << from_ascii(style.latexname());
676 if (!style.latexargs().empty())
677 latexArgInsets(par, os, runparams, style.latexargs());
678 os << from_ascii(style.latexparam());
680 case LATEX_ITEM_ENVIRONMENT:
681 case LATEX_LIST_ENVIRONMENT:
682 if (runparams.for_search) {
683 os << "\\" + style.itemcommand() << "{" << style.latexname() << "}";
686 os << "\\" + style.itemcommand();
688 if (!style.itemargs().empty())
689 latexArgInsets(par, os, runparams, style.itemargs(), "item:");
693 case LATEX_BIB_ENVIRONMENT:
694 // ignore this, the inset will write itself
703 // FIXME: this should be anonymous
704 void TeXOnePar(Buffer const & buf,
708 OutputParams const & runparams_in,
709 string const & everypar,
710 int start_pos, int end_pos,
713 BufferParams const & bparams = runparams_in.is_child
714 ? buf.masterParams() : buf.params();
715 ParagraphList const & paragraphs = text.paragraphs();
716 Paragraph const & par = paragraphs.at(pit);
717 // FIXME This check should not really be needed.
718 // Perhaps we should issue an error if it is.
719 Layout const & style = text.inset().forcePlainLayout() ?
720 bparams.documentClass().plainLayout() : par.layout();
722 if (style.inpreamble && !force)
725 LYXERR(Debug::LATEX, "TeXOnePar for paragraph " << pit << " ptr " << &par << " '"
728 OutputParams runparams = runparams_in;
729 runparams.isLastPar = (pit == pit_type(paragraphs.size() - 1));
730 // We reinitialze par begin and end to be on the safe side
731 // with embedded inset as we don't know if they set those
733 runparams.par_begin = 0;
734 runparams.par_end = 0;
736 bool const maintext = text.isMainText();
737 // we are at the beginning of an inset and CJK is already open;
738 // we count inheritation levels to get the inset nesting right.
739 OutputState * state = getOutputState();
740 if (pit == 0 && !maintext
741 && (state->cjk_inherited_ > 0 || state->open_encoding_ == CJK)) {
742 state->cjk_inherited_ += 1;
743 state->open_encoding_ = none;
746 if (text.inset().isPassThru()) {
747 Font const outerfont = text.outerFont(pit);
749 // No newline before first paragraph in this lyxtext
752 if (!text.inset().getLayout().parbreakIsNewline())
756 par.latex(bparams, outerfont, os, runparams, start_pos, end_pos, force);
760 Paragraph const * nextpar = runparams.isLastPar
761 ? 0 : ¶graphs.at(pit + 1);
763 bool const intitle_command = style.intitle && style.latextype == LATEX_COMMAND;
765 if (style.pass_thru) {
766 Font const outerfont = text.outerFont(pit);
767 parStartCommand(par, os, runparams, style);
771 par.latex(bparams, outerfont, os, runparams, start_pos, end_pos, force);
773 // I did not create a parEndCommand for this minuscule
774 // task because in the other user of parStartCommand
775 // the code is different (JMarc)
776 if (style.isCommand())
780 if (!style.parbreak_is_newline) {
782 } else if (nextpar && !style.isEnvironment()) {
783 Layout const nextstyle = text.inset().forcePlainLayout()
784 ? bparams.documentClass().plainLayout()
786 if (nextstyle.name() != style.name())
793 // This paragraph's language
794 Language const * const par_language = par.getParLanguage(bparams);
795 Language const * const nextpar_language = nextpar ?
796 nextpar->getParLanguage(bparams) : 0;
797 // The document's language
798 Language const * const doc_language = bparams.language;
799 // The language that was in effect when the environment this paragraph is
800 // inside of was opened
801 Language const * const outer_language =
802 (runparams.local_font != 0) ?
803 runparams.local_font->language() : doc_language;
805 Paragraph const * priorpar = (pit == 0) ? 0 : ¶graphs.at(pit - 1);
807 // The previous language that was in effect is the language of the
808 // previous paragraph, unless the previous paragraph is inside an
809 // environment with nesting depth greater than (or equal to, but with
810 // a different layout) the current one. If there is no previous
811 // paragraph, the previous language is the outer language.
812 // Note further that we take the outer language also if the prior par
813 // is PassThru, since in that case it has latex_language, and all secondary
814 // languages have been closed (#10793).
815 bool const use_prev_env_language = state->prev_env_language_ != 0
817 && priorpar->layout().isEnvironment()
818 && (priorpar->getDepth() > par.getDepth()
819 || (priorpar->getDepth() == par.getDepth()
820 && priorpar->layout() != par.layout()));
821 Language const * const prev_language =
822 runparams_in.for_search ?
823 languages.getLanguage("ignore")
824 :(priorpar && !priorpar->isPassThru())
825 ? (use_prev_env_language ? state->prev_env_language_
826 : priorpar->getParLanguage(bparams))
829 bool const use_polyglossia = runparams.use_polyglossia;
830 string const par_lang = use_polyglossia ?
831 getPolyglossiaEnvName(par_language): par_language->babel();
832 string const prev_lang = use_polyglossia ?
833 getPolyglossiaEnvName(prev_language) : prev_language->babel();
834 string const outer_lang = use_polyglossia ?
835 getPolyglossiaEnvName(outer_language) : outer_language->babel();
836 string const nextpar_lang = nextpar_language ? (use_polyglossia ?
837 getPolyglossiaEnvName(nextpar_language) :
838 nextpar_language->babel()) : string();
839 string lang_begin_command = use_polyglossia ?
840 "\\begin{$$lang}$$opts" : lyxrc.language_command_begin;
841 string lang_end_command = use_polyglossia ?
842 "\\end{$$lang}" : lyxrc.language_command_end;
843 // the '%' is necessary to prevent unwanted whitespace
844 string lang_command_termination = "%\n";
845 bool const using_begin_end = use_polyglossia ||
846 !lang_end_command.empty();
848 // For InTitle commands, we need to switch the language inside the command
849 // (see #10849); thus open the command here.
850 if (intitle_command) {
851 parStartCommand(par, os, runparams, style);
855 // In some insets (such as Arguments), we cannot use \selectlanguage.
856 // Also, if an RTL language is set via environment in polyglossia,
857 // only a nested \\text<lang> command will reset the direction for LTR
858 // languages (see # 10111).
859 bool const in_polyglossia_rtl_env =
861 && runparams.local_font != 0
862 && outer_language->rightToLeft()
863 && !par_language->rightToLeft();
864 bool const localswitch = runparams_in.for_search
865 || text.inset().forceLocalFontSwitch()
866 || (using_begin_end && text.inset().forcePlainLayout())
867 || in_polyglossia_rtl_env;
869 lang_begin_command = use_polyglossia ?
870 "\\text$$lang$$opts{" : lyxrc.language_command_local;
871 lang_end_command = "}";
872 lang_command_termination.clear();
875 bool const localswitch_needed = localswitch && par_lang != outer_lang;
877 // localswitches need to be closed and reopened at each par
878 if (runparams_in.for_search || ((par_lang != prev_lang || localswitch_needed)
879 // check if we already put language command in TeXEnvironment()
880 && !(style.isEnvironment()
881 && (pit == 0 || (priorpar->layout() != par.layout()
882 && priorpar->getDepth() <= par.getDepth())
883 || priorpar->getDepth() < par.getDepth())))) {
885 && (!using_begin_end || langOpenedAtThisLevel(state))
886 && !lang_end_command.empty()
887 && prev_lang != outer_lang
888 && !prev_lang.empty()
889 && (!using_begin_end || !style.isEnvironment())) {
890 os << from_ascii(subst(lang_end_command,
893 << lang_command_termination;
898 // We need to open a new language if we couldn't close the previous
899 // one (because there's no language_command_end); and even if we closed
900 // the previous one, if the current language is different than the
901 // outer_language (which is currently in effect once the previous one
903 if ((lang_end_command.empty() || par_lang != outer_lang
905 || (style.isEnvironment() && par_lang != prev_lang)))
906 && !par_lang.empty()) {
907 // If we're inside an inset, and that inset is within an \L or \R
908 // (or equivalents), then within the inset, too, any opposite
909 // language paragraph should appear within an \L or \R (in addition
910 // to, outside of, the normal language switch commands).
911 // This behavior is not correct for ArabTeX, though.
914 && par_language->lang() != "arabic_arabtex"
915 && outer_language->lang() != "arabic_arabtex"
916 // are we in an inset?
917 && runparams.local_font != 0
918 // is the inset within an \L or \R?
920 // FIXME: currently, we don't check this; this means that
921 // we'll have unnnecessary \L and \R commands, but that
922 // doesn't seem to hurt (though latex will complain)
924 // is this paragraph in the opposite direction?
925 && runparams.local_font->isRightToLeft() != par_language->rightToLeft()) {
926 // FIXME: I don't have a working copy of the Arabi package, so
927 // I'm not sure if the farsi and arabic_arabi stuff is correct
929 if (par_language->lang() == "farsi")
931 else if (outer_language->lang() == "farsi")
933 else if (par_language->lang() == "arabic_arabi")
935 else if (outer_language->lang() == "arabic_arabi")
937 // remaining RTL languages currently is hebrew
938 else if (par_language->rightToLeft())
943 // With CJK, the CJK tag has to be closed first (see below)
944 if ((runparams.encoding->package() != Encoding::CJK || runparams.for_search)
945 && (par_lang != openLanguageName(state) || localswitch)
946 && !par_lang.empty()) {
947 string bc = use_polyglossia ?
948 getPolyglossiaBegin(lang_begin_command, par_lang,
949 par_language->polyglossiaOpts(),
951 : subst(lang_begin_command, "$$lang", par_lang);
953 os << lang_command_termination;
955 pushLanguageName(par_lang, localswitch);
960 // Switch file encoding if necessary; no need to do this for "default"
961 // encoding, since this only affects the position of the outputted
962 // \inputencoding command; the encoding switch will occur when necessary
963 if (bparams.inputenc == "auto"
964 && !runparams.isFullUnicode() // Xe/LuaTeX use one document-wide encoding (see also switchEncoding())
965 && runparams.encoding->package() != Encoding::none) {
966 // Look ahead for future encoding changes.
967 // We try to output them at the beginning of the paragraph,
968 // since the \inputencoding command is not allowed e.g. in
969 // sections. For this reason we only set runparams.moving_arg
970 // after checking for the encoding change, otherwise the
971 // change would be always avoided by switchEncoding().
972 for (pos_type i = 0; i < par.size(); ++i) {
973 char_type const c = par.getChar(i);
974 Encoding const * const encoding =
975 par.getFontSettings(bparams, i).language()->encoding();
976 if (encoding->package() != Encoding::CJK
977 && runparams.encoding->package() == Encoding::inputenc
982 // All characters before c are in the ASCII range, and
983 // c is non-ASCII (but no inset), so change the
984 // encoding to that required by the language of c.
985 // With CJK, only add switch if we have CJK content at the beginning
987 if (i != 0 && encoding->package() == Encoding::CJK)
990 pair<bool, int> enc_switch = switchEncoding(os.os(),
991 bparams, runparams, *encoding);
992 // the following is necessary after a CJK environment in a multilingual
993 // context (nesting issue).
994 if (par_language->encoding()->package() == Encoding::CJK
995 && state->open_encoding_ != CJK && state->cjk_inherited_ == 0) {
996 os << "\\begin{CJK}{" << from_ascii(par_language->encoding()->latexName())
997 << "}{" << from_ascii(bparams.fonts_cjk) << "}%\n";
998 state->open_encoding_ = CJK;
1000 if (encoding->package() != Encoding::none && enc_switch.first) {
1001 if (enc_switch.second > 0) {
1002 // the '%' is necessary to prevent unwanted whitespace
1005 // With CJK, the CJK tag had to be closed first (see above)
1006 if (runparams.encoding->package() == Encoding::CJK
1007 && par_lang != openLanguageName(state)
1008 && !par_lang.empty()) {
1009 string bc = use_polyglossia ?
1010 getPolyglossiaBegin(lang_begin_command, par_lang,
1011 par_language->polyglossiaOpts(),
1013 : subst(lang_begin_command, "$$lang", par_lang);
1015 << lang_command_termination;
1016 if (using_begin_end)
1017 pushLanguageName(par_lang, localswitch);
1019 runparams.encoding = encoding;
1025 runparams.moving_arg |= style.needprotect;
1026 Encoding const * const prev_encoding = runparams.encoding;
1028 bool const useSetSpace = bparams.documentClass().provides("SetSpace");
1029 if (par.allowParagraphCustomization()) {
1030 if (par.params().startOfAppendix()) {
1031 os << "\n\\appendix\n";
1034 // InTitle commands must use switches (not environments)
1035 // inside the commands (see #9332)
1036 if (style.intitle) {
1037 if (!par.params().spacing().isDefault())
1039 if (runparams.moving_arg)
1041 os << from_ascii(par.params().spacing().writeCmd(useSetSpace));
1044 if (!par.params().spacing().isDefault()
1045 && (pit == 0 || !priorpar->hasSameLayout(par)))
1047 os << from_ascii(par.params().spacing().writeEnvirBegin(useSetSpace))
1051 if (style.isCommand()) {
1057 // For InTitle commands, we already started the command before
1058 // the language switch
1059 if (!intitle_command)
1060 parStartCommand(par, os, runparams, style);
1062 Font const outerfont = text.outerFont(pit);
1065 os << from_utf8(everypar);
1066 par.latex(bparams, outerfont, os, runparams, start_pos, end_pos, force);
1068 Font const font = par.empty()
1069 ? par.getLayoutFont(bparams, outerfont)
1070 : par.getFont(bparams, par.size() - 1, outerfont);
1072 bool const is_command = style.isCommand();
1074 // InTitle commands need to be closed after the language has been closed.
1075 if (!intitle_command) {
1078 if (!style.postcommandargs().empty())
1079 latexArgInsets(par, os, runparams, style.postcommandargs(), "post:");
1080 if (runparams.encoding != prev_encoding) {
1081 runparams.encoding = prev_encoding;
1082 os << setEncoding(prev_encoding->iconvName());
1087 bool pending_newline = false;
1088 bool unskip_newline = false;
1089 bool close_lang_switch = false;
1090 switch (style.latextype) {
1091 case LATEX_ITEM_ENVIRONMENT:
1092 case LATEX_LIST_ENVIRONMENT:
1093 if ((nextpar && par_lang != nextpar_lang
1094 && nextpar->getDepth() == par.getDepth())
1095 || (atSameLastLangSwitchDepth(state) && nextpar
1096 && nextpar->getDepth() < par.getDepth()))
1097 close_lang_switch = using_begin_end;
1098 if (nextpar && par.params().depth() < nextpar->params().depth())
1099 pending_newline = true;
1101 case LATEX_ENVIRONMENT: {
1102 // if its the last paragraph of the current environment
1103 // skip it otherwise fall through
1105 && ((nextpar->layout() != par.layout()
1106 || nextpar->params().depth() != par.params().depth())
1107 || (!using_begin_end || par_lang != nextpar_lang)))
1109 close_lang_switch = using_begin_end;
1116 // we don't need it for the last paragraph and in InTitle commands!!!
1117 if (nextpar && !intitle_command)
1118 pending_newline = true;
1121 // InTitle commands use switches (not environments) for space settings
1122 if (par.allowParagraphCustomization() && !style.intitle) {
1123 if (!par.params().spacing().isDefault()
1124 && (runparams.isLastPar || !nextpar->hasSameLayout(par))) {
1125 if (pending_newline)
1128 string const endtag =
1129 par.params().spacing().writeEnvirEnd(useSetSpace);
1130 if (prefixIs(endtag, "\\end{"))
1133 os << from_ascii(endtag);
1134 pending_newline = true;
1138 // Closing the language is needed for the last paragraph in a given language
1139 // as well as for any InTitleCommand (since these set the language locally);
1140 // it is also needed if we're within an \L or \R that we may have opened above
1141 // (not necessarily in this paragraph) and are about to close.
1142 bool closing_rtl_ltr_environment = !using_begin_end
1144 && (par_language->lang() != "arabic_arabtex"
1145 && outer_language->lang() != "arabic_arabtex")
1146 // have we opened an \L or \R environment?
1147 && runparams.local_font != 0
1148 && runparams.local_font->isRightToLeft() != par_language->rightToLeft()
1149 // are we about to close the language?
1150 &&((nextpar && par_lang != nextpar_lang)
1151 || (runparams.isLastPar && par_lang != outer_lang));
1153 if (localswitch_needed
1154 || (intitle_command && using_begin_end)
1155 || closing_rtl_ltr_environment
1156 || ((runparams.isLastPar || close_lang_switch)
1157 && (par_lang != outer_lang || (using_begin_end
1158 && style.isEnvironment()
1159 && par_lang != nextpar_lang)))) {
1160 // Since \selectlanguage write the language to the aux file,
1161 // we need to reset the language at the end of footnote or
1164 if (!localswitch && (pending_newline || close_lang_switch))
1167 // when the paragraph uses CJK, the language has to be closed earlier
1168 if ((font.language()->encoding()->package() != Encoding::CJK) || runparams_in.for_search) {
1169 if (lang_end_command.empty()) {
1170 // If this is a child, we should restore the
1171 // master language after the last paragraph.
1172 Language const * const current_language =
1173 (runparams.isLastPar && runparams.master_language)
1174 ? runparams.master_language
1176 string const current_lang = use_polyglossia
1177 ? getPolyglossiaEnvName(current_language)
1178 : current_language->babel();
1179 if (!current_lang.empty()
1180 && current_lang != openLanguageName(state)) {
1181 string bc = use_polyglossia ?
1182 getPolyglossiaBegin(lang_begin_command, current_lang,
1183 current_language->polyglossiaOpts(),
1185 : subst(lang_begin_command, "$$lang", current_lang);
1187 pending_newline = !localswitch;
1188 unskip_newline = !localswitch;
1189 if (using_begin_end)
1190 pushLanguageName(current_lang, localswitch);
1192 } else if ((!using_begin_end ||
1193 langOpenedAtThisLevel(state)) &&
1194 !par_lang.empty()) {
1195 // If we are in an environment, we have to
1196 // close the "outer" language afterwards
1197 string const & cur_lang = openLanguageName(state);
1198 if (!style.isEnvironment()
1199 || (close_lang_switch
1200 && atSameLastLangSwitchDepth(state)
1201 && par_lang != outer_lang
1202 && (par_lang != cur_lang
1203 || (cur_lang != outer_lang
1205 && style != nextpar->layout())))
1206 || (atSameLastLangSwitchDepth(state)
1207 && state->lang_switch_depth_.size()
1208 && cur_lang != par_lang)
1209 || in_polyglossia_rtl_env)
1211 if (using_begin_end && !localswitch)
1213 os << from_ascii(subst(
1217 pending_newline = !localswitch;
1218 unskip_newline = !localswitch;
1219 if (using_begin_end)
1225 if (closing_rtl_ltr_environment)
1228 // InTitle commands need to be closed after the language has been closed.
1229 if (intitle_command) {
1232 if (!style.postcommandargs().empty())
1233 latexArgInsets(par, os, runparams, style.postcommandargs(), "post:");
1234 if (runparams.encoding != prev_encoding) {
1235 runparams.encoding = prev_encoding;
1236 os << setEncoding(prev_encoding->iconvName());
1241 bool const last_was_separator =
1242 par.size() > 0 && par.isEnvSeparator(par.size() - 1);
1244 if (pending_newline) {
1246 // prevent unwanted whitespace
1248 if (!os.afterParbreak() && !last_was_separator)
1252 // if this is a CJK-paragraph and the next isn't, close CJK
1253 // also if the next paragraph is a multilingual environment (because of nesting)
1255 && state->open_encoding_ == CJK
1256 && (nextpar_language->encoding()->package() != Encoding::CJK
1257 || (nextpar->layout().isEnvironment() && nextpar->isMultiLingual(bparams)))
1258 // inbetween environments, CJK has to be closed later (nesting!)
1259 && (!style.isEnvironment() || !nextpar->layout().isEnvironment())) {
1260 os << "\\end{CJK}\n";
1261 state->open_encoding_ = none;
1264 // If this is the last paragraph, close the CJK environment
1265 // if necessary. If it's an environment, we'll have to \end that first.
1266 if (runparams.isLastPar && !style.isEnvironment()) {
1267 switch (state->open_encoding_) {
1269 // do nothing at the end of child documents
1270 if (maintext && buf.masterBuffer() != &buf)
1274 os << "\n\\end{CJK}\n";
1278 state->open_encoding_ = none;
1283 state->open_encoding_ = none;
1293 // If this is the last paragraph, and a local_font was set upon entering
1294 // the inset, and we're using "auto" or "default" encoding, and not
1295 // compiling with XeTeX or LuaTeX, the encoding
1296 // should be set back to that local_font's encoding.
1297 if (runparams.isLastPar && runparams_in.local_font != 0
1298 && runparams_in.encoding != runparams_in.local_font->language()->encoding()
1299 && (bparams.inputenc == "auto" || bparams.inputenc == "default")
1300 && !runparams.isFullUnicode()
1302 runparams_in.encoding = runparams_in.local_font->language()->encoding();
1303 os << setEncoding(runparams_in.encoding->iconvName());
1305 // Otherwise, the current encoding should be set for the next paragraph.
1307 runparams_in.encoding = runparams.encoding;
1310 // we don't need a newline for the last paragraph!!!
1311 // Note from JMarc: we will re-add a \n explicitly in
1312 // TeXEnvironment, because it is needed in this case
1313 if (nextpar && !os.afterParbreak() && !last_was_separator) {
1314 // Make sure to start a new line
1316 Layout const & next_layout = nextpar->layout();
1317 // A newline '\n' is always output before a command,
1318 // so avoid doubling it.
1319 if (!next_layout.isCommand()) {
1320 // Here we now try to avoid spurious empty lines by
1321 // outputting a paragraph break only if: (case 1) the
1322 // paragraph style allows parbreaks and no \begin, \end
1323 // or \item tags are going to follow (i.e., if the next
1324 // isn't the first or the current isn't the last
1325 // paragraph of an environment or itemize) and the
1326 // depth and alignment of the following paragraph is
1327 // unchanged, or (case 2) the following is a
1328 // non-environment paragraph whose depth is increased
1329 // but whose alignment is unchanged, or (case 3) the
1330 // paragraph is not an environment and the next one is a
1331 // non-itemize-like env at lower depth, or (case 4) the
1332 // paragraph is a command not followed by an environment
1333 // and the alignment of the current and next paragraph
1334 // is unchanged, or (case 5) the current alignment is
1335 // changed and a standard paragraph follows.
1336 DocumentClass const & tclass = bparams.documentClass();
1337 if ((style == next_layout
1338 && !style.parbreak_is_newline
1339 && !text.inset().getLayout().parbreakIsNewline()
1340 && style.latextype != LATEX_ITEM_ENVIRONMENT
1341 && style.latextype != LATEX_LIST_ENVIRONMENT
1342 && style.align == par.getAlign()
1343 && nextpar->getDepth() == par.getDepth()
1344 && nextpar->getAlign() == par.getAlign())
1345 || (!next_layout.isEnvironment()
1346 && nextpar->getDepth() > par.getDepth()
1347 && nextpar->getAlign() == par.getAlign())
1348 || (!style.isEnvironment()
1349 && next_layout.latextype == LATEX_ENVIRONMENT
1350 && nextpar->getDepth() < par.getDepth())
1351 || (style.isCommand()
1352 && !next_layout.isEnvironment()
1353 && style.align == par.getAlign()
1354 && next_layout.align == nextpar->getAlign())
1355 || (style.align != par.getAlign()
1356 && tclass.isDefaultLayout(next_layout))) {
1362 LYXERR(Debug::LATEX, "TeXOnePar for paragraph " << pit << " done; ptr "
1363 << &par << " next " << nextpar);
1369 // LaTeX all paragraphs
1370 void latexParagraphs(Buffer const & buf,
1373 OutputParams const & runparams,
1374 string const & everypar)
1376 LASSERT(runparams.par_begin <= runparams.par_end,
1377 { os << "% LaTeX Output Error\n"; return; } );
1379 BufferParams const & bparams = buf.params();
1380 BufferParams const & mparams = buf.masterParams();
1382 bool const maintext = text.isMainText();
1383 bool const is_child = buf.masterBuffer() != &buf;
1384 bool const multibib_child = maintext && is_child
1385 && mparams.multibib == "child";
1387 if (multibib_child && mparams.useBiblatex())
1388 os << "\\newrefsection";
1389 else if (multibib_child && mparams.useBibtopic()) {
1390 os << "\\begin{btUnit}\n";
1391 runparams.openbtUnit = true;
1394 // Open a CJK environment at the beginning of the main buffer
1395 // if the document's language is a CJK language
1396 // (but not in child documents)
1397 OutputState * state = getOutputState();
1398 if (maintext && !is_child
1399 && bparams.encoding().package() == Encoding::CJK) {
1400 os << "\\begin{CJK}{" << from_ascii(bparams.encoding().latexName())
1401 << "}{" << from_ascii(bparams.fonts_cjk) << "}%\n";
1402 state->open_encoding_ = CJK;
1404 // if "auto begin" is switched off, explicitly switch the
1405 // language on at start
1406 string const mainlang = runparams.use_polyglossia
1407 ? getPolyglossiaEnvName(bparams.language)
1408 : bparams.language->babel();
1409 string const lang_begin_command = runparams.use_polyglossia ?
1410 "\\begin{$$lang}$$opts" : lyxrc.language_command_begin;
1411 string const lang_end_command = runparams.use_polyglossia ?
1412 "\\end{$$lang}" : lyxrc.language_command_end;
1413 bool const using_begin_end = runparams.use_polyglossia ||
1414 !lang_end_command.empty();
1416 if (maintext && !lyxrc.language_auto_begin &&
1417 !mainlang.empty()) {
1419 string bc = runparams.use_polyglossia ?
1420 getPolyglossiaBegin(lang_begin_command, mainlang,
1421 bparams.language->polyglossiaOpts())
1422 : subst(lang_begin_command, "$$lang", mainlang);
1425 if (using_begin_end)
1426 pushLanguageName(mainlang);
1429 ParagraphList const & paragraphs = text.paragraphs();
1431 if (runparams.par_begin == runparams.par_end) {
1432 // The full doc will be exported but it is easier to just rely on
1433 // runparams range parameters that will be passed TeXEnvironment.
1434 runparams.par_begin = 0;
1435 runparams.par_end = paragraphs.size();
1438 pit_type pit = runparams.par_begin;
1439 // lastpit is for the language check after the loop.
1440 pit_type lastpit = pit;
1441 // variables used in the loop:
1442 bool was_title = false;
1443 bool already_title = false;
1444 DocumentClass const & tclass = bparams.documentClass();
1446 // Did we already warn about inTitle layout mixing? (we only warn once)
1447 bool gave_layout_warning = false;
1448 for (; pit < runparams.par_end; ++pit) {
1450 ParagraphList::const_iterator par = paragraphs.constIterator(pit);
1452 // FIXME This check should not be needed. We should
1453 // perhaps issue an error if it is.
1454 Layout const & layout = text.inset().forcePlainLayout() ?
1455 tclass.plainLayout() : par->layout();
1457 if (layout.intitle) {
1458 if (already_title) {
1459 if (!gave_layout_warning && !runparams.dryrun) {
1460 gave_layout_warning = true;
1461 frontend::Alert::warning(_("Error in latexParagraphs"),
1462 bformat(_("You are using at least one "
1463 "layout (%1$s) intended for the title, "
1464 "after using non-title layouts. This "
1465 "could lead to missing or incorrect output."
1468 } else if (!was_title) {
1470 if (tclass.titletype() == TITLE_ENVIRONMENT) {
1472 << from_ascii(tclass.titlename())
1476 } else if (was_title && !already_title && !layout.inpreamble) {
1477 if (tclass.titletype() == TITLE_ENVIRONMENT) {
1478 os << "\\end{" << from_ascii(tclass.titlename())
1482 os << "\\" << from_ascii(tclass.titlename())
1485 already_title = true;
1489 if (layout.isCommand() && !layout.latexname().empty()
1490 && layout.latexname() == bparams.multibib) {
1491 if (runparams.openbtUnit)
1492 os << "\\end{btUnit}\n";
1493 if (!bparams.useBiblatex()) {
1494 os << '\n' << "\\begin{btUnit}\n";
1495 runparams.openbtUnit = true;
1499 if (!layout.isEnvironment() && par->params().leftIndent().zero()) {
1500 // This is a standard top level paragraph, TeX it and continue.
1501 TeXOnePar(buf, text, pit, os, runparams, everypar);
1505 TeXEnvironmentData const data =
1506 prepareEnvironment(buf, text, par, os, runparams);
1507 // pit can be changed in TeXEnvironment.
1508 TeXEnvironment(buf, text, runparams, pit, os);
1509 finishEnvironment(os, runparams, data);
1512 if (pit == runparams.par_end) {
1513 // Make sure that the last paragraph is
1514 // correctly terminated (because TeXOnePar does
1515 // not add a \n in this case)
1519 // It might be that we only have a title in this document
1520 if (was_title && !already_title) {
1521 if (tclass.titletype() == TITLE_ENVIRONMENT) {
1522 os << "\\end{" << from_ascii(tclass.titlename())
1525 os << "\\" << from_ascii(tclass.titlename())
1530 if (maintext && !is_child && runparams.openbtUnit)
1531 os << "\\end{btUnit}\n";
1533 // if "auto end" is switched off, explicitly close the language at the end
1534 // but only if the last par is in a babel or polyglossia language
1535 if (maintext && !lyxrc.language_auto_end && !mainlang.empty() &&
1536 paragraphs.at(lastpit).getParLanguage(bparams)->encoding()->package() != Encoding::CJK) {
1537 os << from_utf8(subst(lang_end_command,
1541 if (using_begin_end)
1545 // If the last paragraph is an environment, we'll have to close
1546 // CJK at the very end to do proper nesting.
1547 if (maintext && !is_child && state->open_encoding_ == CJK) {
1548 os << "\\end{CJK}\n";
1549 state->open_encoding_ = none;
1551 // Likewise for polyglossia or when using begin/end commands
1552 string const & cur_lang = openLanguageName(state);
1553 if (maintext && !is_child && !cur_lang.empty()) {
1554 os << from_utf8(subst(lang_end_command,
1558 if (using_begin_end)
1562 // reset inherited encoding
1563 if (state->cjk_inherited_ > 0) {
1564 state->cjk_inherited_ -= 1;
1565 if (state->cjk_inherited_ == 0)
1566 state->open_encoding_ = CJK;
1569 if (multibib_child && mparams.useBibtopic()) {
1570 os << "\\end{btUnit}\n";
1571 runparams.openbtUnit = false;
1576 pair<bool, int> switchEncoding(odocstream & os, BufferParams const & bparams,
1577 OutputParams const & runparams, Encoding const & newEnc,
1578 bool force, bool noswitchmacro)
1580 // XeTeX/LuaTeX use only one encoding per document:
1581 // * with useNonTeXFonts: "utf8plain",
1582 // * with XeTeX and TeX fonts: "ascii" (inputenc fails),
1583 // * with LuaTeX and TeX fonts: only one encoding accepted by luainputenc.
1584 if (runparams.isFullUnicode() || newEnc.name() == "inherit")
1585 return make_pair(false, 0);
1587 Encoding const & oldEnc = *runparams.encoding;
1588 bool moving_arg = runparams.moving_arg;
1589 // If we switch from/to CJK, we need to switch anyway, despite custom inputenc
1590 bool const from_to_cjk =
1591 (oldEnc.package() == Encoding::CJK && newEnc.package() != Encoding::CJK)
1592 || (oldEnc.package() != Encoding::CJK && newEnc.package() == Encoding::CJK);
1593 if (!force && !from_to_cjk
1594 && ((bparams.inputenc != "auto" && bparams.inputenc != "default") || moving_arg))
1595 return make_pair(false, 0);
1597 // Do nothing if the encoding is unchanged.
1598 if (oldEnc.name() == newEnc.name())
1599 return make_pair(false, 0);
1601 // FIXME We ignore encoding switches from/to encodings that do
1602 // neither support the inputenc package nor the CJK package here.
1603 // This does of course only work in special cases (e.g. switch from
1604 // tis620-0 to latin1, but the text in latin1 contains ASCII only),
1605 // but it is the best we can do
1606 if (oldEnc.package() == Encoding::none
1607 || newEnc.package() == Encoding::none)
1608 return make_pair(false, 0);
1610 LYXERR(Debug::LATEX, "Changing LaTeX encoding from "
1611 << oldEnc.name() << " to " << newEnc.name());
1612 os << setEncoding(newEnc.iconvName());
1613 if (bparams.inputenc == "default")
1614 return make_pair(true, 0);
1616 docstring const inputenc_arg(from_ascii(newEnc.latexName()));
1617 OutputState * state = getOutputState();
1618 switch (newEnc.package()) {
1619 case Encoding::none:
1620 case Encoding::japanese:
1621 // shouldn't ever reach here, see above
1622 return make_pair(true, 0);
1623 case Encoding::inputenc: {
1624 int count = inputenc_arg.length();
1625 if (oldEnc.package() == Encoding::CJK &&
1626 state->open_encoding_ == CJK) {
1628 state->open_encoding_ = none;
1631 else if (oldEnc.package() == Encoding::inputenc &&
1632 state->open_encoding_ == inputenc) {
1634 state->open_encoding_ = none;
1637 if (runparams.local_font != 0
1638 && oldEnc.package() == Encoding::CJK) {
1639 // within insets, \inputenc switches need
1640 // to be embraced within \bgroup...\egroup;
1644 state->open_encoding_ = inputenc;
1646 // with the japanese option, inputenc is omitted.
1647 if (runparams.use_japanese || noswitchmacro)
1648 return make_pair(true, count);
1649 os << "\\inputencoding{" << inputenc_arg << '}';
1650 return make_pair(true, count + 16);
1652 case Encoding::CJK: {
1653 int count = inputenc_arg.length();
1654 if (oldEnc.package() == Encoding::CJK &&
1655 state->open_encoding_ == CJK) {
1659 if (oldEnc.package() == Encoding::inputenc &&
1660 state->open_encoding_ == inputenc) {
1664 os << "\\begin{CJK}{" << inputenc_arg << "}{"
1665 << from_ascii(bparams.fonts_cjk) << "}";
1666 state->open_encoding_ = CJK;
1667 return make_pair(true, count + 15);
1670 // Dead code to avoid a warning:
1671 return make_pair(true, 0);