2 * \file insetgraphics.C
3 * This file is part of LyX, the document processor.
4 * Licence details can be found in the file COPYING.
9 * Full author contact details are available in file CREDITS.
15 * What advanced features the users want to do?
16 Implement them in a non latex dependent way, but a logical way.
17 LyX should translate it to latex or any other fitting format.
18 * Add a way to roll the image file into the file format.
19 * When loading, if the image is not found in the expected place, try
20 to find it in the clipart, or in the same directory with the image.
21 * The image choosing dialog could show thumbnails of the image formats
22 it knows of, thus selection based on the image instead of based on
24 * Add support for the 'picins' package.
25 * Add support for the 'picinpar' package.
26 * Improve support for 'subfigure' - Allow to set the various options
32 * The filename is kept in the lyx file in a relative way, so as to allow
33 * moving the document file and its images with no problem.
37 * Postscript output means EPS figures.
39 * PDF output is best done with PDF figures if it's a direct conversion
40 * or PNG figures otherwise.
52 #include "insets/insetgraphics.h"
53 #include "insets/render_graphic.h"
56 #include "BufferView.h"
57 #include "converter.h"
60 #include "dispatchresult.h"
63 #include "funcrequest.h"
64 #include "FuncStatus.h"
66 #include "LaTeXFeatures.h"
67 #include "lyxlength.h"
69 #include "metricsinfo.h"
71 #include "outputparams.h"
74 #include "frontends/Alert.h"
76 #include "support/convert.h"
77 #include "support/filetools.h"
78 #include "support/lyxalgo.h" // count
79 #include "support/lyxlib.h" // sum
80 #include "support/lstrings.h"
81 #include "support/os.h"
82 #include "support/systemcall.h"
84 #include <boost/bind.hpp>
85 #include <boost/tuple/tuple.hpp>
92 using support::bformat;
93 using support::changeExtension;
94 using support::compare_timestamps;
95 using support::contains;
96 using support::DocFileName;
97 using support::FileName;
98 using support::float_equal;
99 using support::getExtension;
100 using support::isFileReadable;
101 using support::latex_path;
102 using support::onlyFilename;
103 using support::removeExtension;
104 using support::rtrim;
105 using support::subst;
106 using support::Systemcall;
107 using support::unzipFile;
108 using support::unzippedFileName;
113 using std::istringstream;
115 using std::ostringstream;
120 /// Find the most suitable image format for images in \p format
121 /// Note that \p format may be unknown (i. e. an empty string)
122 string findTargetFormat(string const & format, OutputParams const & runparams)
124 // Are we using latex or pdflatex?
125 if (runparams.flavor == OutputParams::PDFLATEX) {
126 lyxerr[Debug::GRAPHICS] << "findTargetFormat: PDF mode" << endl;
127 Format const * const f = formats.getFormat(format);
128 // Convert vector graphics to pdf
129 if (f && f->vectorFormat())
131 // pdflatex can use jpeg, png and pdf directly
134 // Convert everything else to png
137 // If it's postscript, we always do eps.
138 lyxerr[Debug::GRAPHICS] << "findTargetFormat: PostScript mode" << endl;
140 // any other than ps is changed to eps
149 InsetGraphics::InsetGraphics()
150 : graphic_label(sgml::uniqueID(from_ascii("graph"))),
151 graphic_(new RenderGraphic(this))
155 InsetGraphics::InsetGraphics(InsetGraphics const & ig)
157 boost::signals::trackable(),
158 graphic_label(sgml::uniqueID(from_ascii("graph"))),
159 graphic_(new RenderGraphic(*ig.graphic_, this))
161 setParams(ig.params());
165 auto_ptr<InsetBase> InsetGraphics::doClone() const
167 return auto_ptr<InsetBase>(new InsetGraphics(*this));
171 InsetGraphics::~InsetGraphics()
173 InsetGraphicsMailer(*this).hideDialog();
177 void InsetGraphics::doDispatch(LCursor & cur, FuncRequest & cmd)
179 switch (cmd.action) {
180 case LFUN_GRAPHICS_EDIT: {
181 Buffer const & buffer = *cur.bv().buffer();
182 InsetGraphicsParams p;
183 InsetGraphicsMailer::string2params(to_utf8(cmd.argument()), buffer, p);
184 editGraphics(p, buffer);
188 case LFUN_INSET_MODIFY: {
189 Buffer const & buffer = cur.buffer();
190 InsetGraphicsParams p;
191 InsetGraphicsMailer::string2params(to_utf8(cmd.argument()), buffer, p);
192 if (!p.filename.empty())
199 case LFUN_INSET_DIALOG_UPDATE:
200 InsetGraphicsMailer(*this).updateDialog(&cur.bv());
203 case LFUN_MOUSE_RELEASE:
204 InsetGraphicsMailer(*this).showDialog(&cur.bv());
208 InsetBase::doDispatch(cur, cmd);
214 bool InsetGraphics::getStatus(LCursor & cur, FuncRequest const & cmd,
215 FuncStatus & flag) const
217 switch (cmd.action) {
218 case LFUN_GRAPHICS_EDIT:
219 case LFUN_INSET_MODIFY:
220 case LFUN_INSET_DIALOG_UPDATE:
225 return InsetBase::getStatus(cur, cmd, flag);
230 void InsetGraphics::edit(LCursor & cur, bool)
232 InsetGraphicsMailer(*this).showDialog(&cur.bv());
236 bool InsetGraphics::metrics(MetricsInfo & mi, Dimension & dim) const
238 graphic_->metrics(mi, dim);
239 bool const changed = dim_ != dim;
245 void InsetGraphics::draw(PainterInfo & pi, int x, int y) const
247 setPosCache(pi, x, y);
248 graphic_->draw(pi, x, y);
252 InsetBase::EDITABLE InsetGraphics::editable() const
258 void InsetGraphics::write(Buffer const & buf, ostream & os) const
261 params().Write(os, buf.filePath());
265 void InsetGraphics::read(Buffer const & buf, LyXLex & lex)
267 string const token = lex.getString();
269 if (token == "Graphics")
270 readInsetGraphics(lex, buf.filePath());
272 lyxerr[Debug::GRAPHICS] << "Not a Graphics inset!" << endl;
274 graphic_->update(params().as_grfxParams());
278 void InsetGraphics::readInsetGraphics(LyXLex & lex, string const & bufpath)
280 bool finished = false;
282 while (lex.isOK() && !finished) {
285 string const token = lex.getString();
286 lyxerr[Debug::GRAPHICS] << "Token: '" << token << '\''
291 } else if (token == "\\end_inset") {
294 if (!params_.Read(lex, token, bufpath))
295 lyxerr << "Unknown token, " << token << ", skipping."
302 string const InsetGraphics::createLatexOptions() const
304 // Calculate the options part of the command, we must do it to a string
305 // stream since we might have a trailing comma that we would like to remove
306 // before writing it to the output stream.
307 ostringstream options;
308 if (!params().bb.empty())
309 options << "bb=" << rtrim(params().bb) << ',';
314 double const scl = convert<double>(params().scale);
315 if (!params().scale.empty() && !float_equal(scl, 0.0, 0.05)) {
316 if (!float_equal(scl, 100.0, 0.05))
317 options << "scale=" << scl / 100.0 << ',';
319 if (!params().width.zero())
320 options << "width=" << params().width.asLatexString() << ',';
321 if (!params().height.zero())
322 options << "height=" << params().height.asLatexString() << ',';
323 if (params().keepAspectRatio)
324 options << "keepaspectratio,";
327 // Make sure rotation angle is not very close to zero;
328 // a float can be effectively zero but not exactly zero.
329 if (!params().rotateAngle.empty()
330 && !float_equal(convert<double>(params().rotateAngle), 0.0, 0.001)) {
331 options << "angle=" << params().rotateAngle << ',';
332 if (!params().rotateOrigin.empty()) {
333 options << "origin=" << params().rotateOrigin[0];
334 if (contains(params().rotateOrigin,"Top"))
336 else if (contains(params().rotateOrigin,"Bottom"))
338 else if (contains(params().rotateOrigin,"Baseline"))
344 if (!params().special.empty())
345 options << params().special << ',';
347 string opts = options.str();
349 return opts.substr(0, opts.size() - 1);
353 docstring const InsetGraphics::toDocbookLength(LyXLength const & len) const
355 odocstringstream result;
356 switch (len.unit()) {
357 case LyXLength::SP: // Scaled point (65536sp = 1pt) TeX's smallest unit.
358 result << len.value() * 65536.0 * 72 / 72.27 << "pt";
360 case LyXLength::PT: // Point = 1/72.27in = 0.351mm
361 result << len.value() * 72 / 72.27 << "pt";
363 case LyXLength::BP: // Big point (72bp = 1in), also PostScript point
364 result << len.value() << "pt";
366 case LyXLength::DD: // Didot point = 1/72 of a French inch, = 0.376mm
367 result << len.value() * 0.376 << "mm";
369 case LyXLength::MM: // Millimeter = 2.845pt
370 result << len.value() << "mm";
372 case LyXLength::PC: // Pica = 12pt = 4.218mm
373 result << len.value() << "pc";
375 case LyXLength::CC: // Cicero = 12dd = 4.531mm
376 result << len.value() * 4.531 << "mm";
378 case LyXLength::CM: // Centimeter = 10mm = 2.371pc
379 result << len.value() << "cm";
381 case LyXLength::IN: // Inch = 25.4mm = 72.27pt = 6.022pc
382 result << len.value() << "in";
384 case LyXLength::EX: // Height of a small "x" for the current font.
385 // Obviously we have to compromise here. Any better ratio than 1.5 ?
386 result << len.value() / 1.5 << "em";
388 case LyXLength::EM: // Width of capital "M" in current font.
389 result << len.value() << "em";
391 case LyXLength::MU: // Math unit (18mu = 1em) for positioning in math mode
392 result << len.value() * 18 << "em";
394 case LyXLength::PTW: // Percent of TextWidth
395 case LyXLength::PCW: // Percent of ColumnWidth
396 case LyXLength::PPW: // Percent of PageWidth
397 case LyXLength::PLW: // Percent of LineWidth
398 case LyXLength::PTH: // Percent of TextHeight
399 case LyXLength::PPH: // Percent of Paper
400 // Sigh, this will go wrong.
401 result << len.value() << "%";
404 result << len.asDocstring();
410 docstring const InsetGraphics::createDocBookAttributes() const
412 // Calculate the options part of the command, we must do it to a string
413 // stream since we copied the code from createLatexParams() ;-)
415 // FIXME: av: need to translate spec -> Docbook XSL spec (http://www.sagehill.net/docbookxsl/ImageSizing.html)
416 // Right now it only works with my version of db2latex :-)
418 odocstringstream options;
419 double const scl = convert<double>(params().scale);
420 if (!params().scale.empty() && !float_equal(scl, 0.0, 0.05)) {
421 if (!float_equal(scl, 100.0, 0.05))
422 options << " scale=\""
423 << static_cast<int>( (scl) + 0.5 )
426 if (!params().width.zero()) {
427 options << " width=\"" << toDocbookLength(params().width) << "\" ";
429 if (!params().height.zero()) {
430 options << " depth=\"" << toDocbookLength(params().height) << "\" ";
432 if (params().keepAspectRatio) {
433 // This will be irrelevant unless both width and height are set
434 options << "scalefit=\"1\" ";
439 if (!params().special.empty())
440 options << from_ascii(params().special) << " ";
442 // trailing blanks are ok ...
443 return options.str();
457 std::pair<CopyStatus, FileName> const
458 copyFileIfNeeded(FileName const & file_in, FileName const & file_out)
460 unsigned long const checksum_in = support::sum(file_in);
461 unsigned long const checksum_out = support::sum(file_out);
463 if (checksum_in == checksum_out)
465 return std::make_pair(IDENTICAL_CONTENTS, file_out);
467 Mover const & mover = movers(formats.getFormatFromFile(file_in));
468 bool const success = mover.copy(file_in, file_out);
471 lyxerr[Debug::GRAPHICS]
472 << to_utf8(support::bformat(_("Could not copy the file\n%1$s\n"
473 "into the temporary directory."),
474 from_utf8(file_in.absFilename())))
478 CopyStatus status = success ? SUCCESS : FAILURE;
479 return std::make_pair(status, file_out);
483 std::pair<CopyStatus, FileName> const
484 copyToDirIfNeeded(DocFileName const & file, string const & dir)
486 using support::rtrim;
488 string const file_in = file.absFilename();
489 string const only_path = support::onlyPath(file_in);
490 if (rtrim(support::onlyPath(file_in) , "/") == rtrim(dir, "/"))
491 return std::make_pair(IDENTICAL_PATHS, file_in);
493 string mangled = file.mangledFilename();
494 if (file.isZipped()) {
495 // We need to change _eps.gz to .eps.gz. The mangled name is
496 // still unique because of the counter in mangledFilename().
497 // We can't just call mangledFilename() with the zip
498 // extension removed, because base.eps and base.eps.gz may
499 // have different content but would get the same mangled
500 // name in this case.
501 string const base = removeExtension(file.unzippedFilename());
502 string::size_type const ext_len = file_in.length() - base.length();
503 mangled[mangled.length() - ext_len] = '.';
505 FileName const file_out(support::makeAbsPath(mangled, dir));
507 return copyFileIfNeeded(file, file_out);
511 string const stripExtensionIfPossible(string const & file)
513 // Remove the extension so the LaTeX will use whatever
514 // is appropriate (when there are several versions in
515 // different formats)
516 // This works only if the filename contains no dots besides
517 // the just removed one. We can fool here by replacing all
518 // dots with a macro whose definition is just a dot ;-)
519 // The automatic format selection does not work if the file
521 string const latex_name = latex_path(file,
522 support::EXCLUDE_EXTENSION);
523 if (contains(latex_name, '"'))
525 return latex_path(removeExtension(file),
526 support::PROTECT_EXTENSION,
527 support::ESCAPE_DOTS);
531 string const stripExtensionIfPossible(string const & file, string const & to)
533 // No conversion is needed. LaTeX can handle the graphic file as is.
534 // This is true even if the orig_file is compressed.
535 string const to_format = formats.getFormat(to)->extension();
536 string const file_format = getExtension(file);
537 // for latex .ps == .eps
538 if (to_format == file_format ||
539 (to_format == "eps" && file_format == "ps") ||
540 (to_format == "ps" && file_format == "eps"))
541 return stripExtensionIfPossible(file);
542 return latex_path(file, support::EXCLUDE_EXTENSION);
548 string const InsetGraphics::prepareFile(Buffer const & buf,
549 OutputParams const & runparams) const
551 // The following code depends on non-empty filenames
552 if (params().filename.empty())
555 string const orig_file = params().filename.absFilename();
556 string const rel_file = params().filename.relFilename(buf.filePath());
558 // previewing source code, no file copying or file format conversion
559 if (runparams.dryrun)
560 return stripExtensionIfPossible(rel_file);
562 // temp_file will contain the file for LaTeX to act on if, for example,
563 // we move it to a temp dir or uncompress it.
564 FileName temp_file = params().filename;
566 // The master buffer. This is useful when there are multiple levels
568 Buffer const * m_buffer = buf.getMasterBuffer();
570 // Return the output name if we are inside a comment or the file does
572 // We are not going to change the extension or using the name of the
573 // temporary file, the code is already complicated enough.
574 if (runparams.inComment || !isFileReadable(params().filename))
575 return params().filename.outputFilename(m_buffer->filePath());
577 // We place all temporary files in the master buffer's temp dir.
578 // This is possible because we use mangled file names.
579 // This is necessary for DVI export.
580 string const temp_path = m_buffer->temppath();
583 boost::tie(status, temp_file) =
584 copyToDirIfNeeded(params().filename, temp_path);
586 if (status == FAILURE)
589 // a relative filename should be relative to the master
591 // "nice" means that the buffer is exported to LaTeX format but not
592 // run through the LaTeX compiler.
593 string output_file = support::os::external_path(runparams.nice ?
594 params().filename.outputFilename(m_buffer->filePath()) :
595 onlyFilename(temp_file.absFilename()));
596 FileName source_file = runparams.nice ? FileName(params().filename) : temp_file;
597 string const tex_format = (runparams.flavor == OutputParams::LATEX) ?
598 "latex" : "pdflatex";
600 // If the file is compressed and we have specified that it
601 // should not be uncompressed, then just return its name and
602 // let LaTeX do the rest!
603 if (params().filename.isZipped()) {
604 if (params().noUnzip) {
605 // We don't know whether latex can actually handle
606 // this file, but we can't check, because that would
607 // mean to unzip the file and thereby making the
608 // noUnzip parameter meaningless.
609 lyxerr[Debug::GRAPHICS]
610 << "\tpass zipped file to LaTeX.\n";
612 FileName const bb_orig_file = FileName(changeExtension(orig_file, "bb"));
613 if (runparams.nice) {
614 runparams.exportdata->addExternalFile(tex_format,
616 changeExtension(output_file, "bb"));
618 // LaTeX needs the bounding box file in the
620 FileName bb_file = FileName(changeExtension(temp_file.absFilename(), "bb"));
621 boost::tie(status, bb_file) =
622 copyFileIfNeeded(bb_orig_file, bb_file);
623 if (status == FAILURE)
625 runparams.exportdata->addExternalFile(tex_format,
628 runparams.exportdata->addExternalFile(tex_format,
629 source_file, output_file);
630 runparams.exportdata->addExternalFile("dvi",
631 source_file, output_file);
632 // We can't strip the extension, because we don't know
633 // the unzipped file format
634 return latex_path(output_file,
635 support::EXCLUDE_EXTENSION);
638 FileName const unzipped_temp_file =
639 FileName(unzippedFileName(temp_file.absFilename()));
640 output_file = unzippedFileName(output_file);
641 source_file = FileName(unzippedFileName(source_file.absFilename()));
642 if (compare_timestamps(unzipped_temp_file, temp_file) > 0) {
643 // temp_file has been unzipped already and
644 // orig_file has not changed in the meantime.
645 temp_file = unzipped_temp_file;
646 lyxerr[Debug::GRAPHICS]
647 << "\twas already unzipped to " << temp_file
650 // unzipped_temp_file does not exist or is too old
651 temp_file = unzipFile(temp_file);
652 lyxerr[Debug::GRAPHICS]
653 << "\tunzipped to " << temp_file << endl;
657 string const from = formats.getFormatFromFile(temp_file);
659 lyxerr[Debug::GRAPHICS]
660 << "\tCould not get file format." << endl;
662 string const to = findTargetFormat(from, runparams);
663 string const ext = formats.extension(to);
664 lyxerr[Debug::GRAPHICS]
665 << "\t we have: from " << from << " to " << to << '\n';
667 // We're going to be running the exported buffer through the LaTeX
668 // compiler, so must ensure that LaTeX can cope with the graphics
671 lyxerr[Debug::GRAPHICS]
672 << "\tthe orig file is: " << orig_file << endl;
675 if (!runparams.nice && getExtension(temp_file.absFilename()) != ext) {
676 // The LaTeX compiler will not be able to determine
677 // the file format from the extension, so we must
679 FileName const new_file = FileName(changeExtension(temp_file.absFilename(), ext));
680 if (support::rename(temp_file, new_file)) {
681 temp_file = new_file;
682 output_file = changeExtension(output_file, ext);
683 source_file = FileName(changeExtension(source_file.absFilename(), ext));
685 lyxerr[Debug::GRAPHICS]
686 << "Could not rename file `"
687 << temp_file << "' to `" << new_file
690 // The extension of temp_file might be != ext!
691 runparams.exportdata->addExternalFile(tex_format, source_file,
693 runparams.exportdata->addExternalFile("dvi", source_file,
695 return stripExtensionIfPossible(output_file, to);
698 FileName const to_file = FileName(changeExtension(temp_file.absFilename(), ext));
699 string const output_to_file = changeExtension(output_file, ext);
701 // Do we need to perform the conversion?
702 // Yes if to_file does not exist or if temp_file is newer than to_file
703 if (compare_timestamps(temp_file, to_file) < 0) {
705 lyxerr[Debug::GRAPHICS]
706 << to_utf8(bformat(_("No conversion of %1$s is needed after all"),
707 from_utf8(rel_file)))
709 runparams.exportdata->addExternalFile(tex_format, to_file,
711 runparams.exportdata->addExternalFile("dvi", to_file,
713 return stripExtensionIfPossible(output_file);
716 lyxerr[Debug::GRAPHICS]
717 << "\tThe original file is " << orig_file << "\n"
718 << "\tA copy has been made and convert is to be called with:\n"
719 << "\tfile to convert = " << temp_file << '\n'
720 << "\t from " << from << " to " << to << '\n';
722 // FIXME (Abdel 12/08/06): Is there a need to show these errors?
724 if (converters.convert(&buf, temp_file, to_file, params().filename,
726 Converters::try_default | Converters::try_cache)) {
727 runparams.exportdata->addExternalFile(tex_format,
728 to_file, output_to_file);
729 runparams.exportdata->addExternalFile("dvi",
730 to_file, output_to_file);
733 return stripExtensionIfPossible(output_file);
737 int InsetGraphics::latex(Buffer const & buf, odocstream & os,
738 OutputParams const & runparams) const
740 // If there is no file specified or not existing,
741 // just output a message about it in the latex output.
742 lyxerr[Debug::GRAPHICS]
743 << "insetgraphics::latex: Filename = "
744 << params().filename.absFilename() << endl;
746 string const relative_file =
747 params().filename.relFilename(buf.filePath());
749 bool const file_exists = !params().filename.empty() &&
750 isFileReadable(params().filename);
751 string const message = file_exists ?
752 string() : string("bb = 0 0 200 100, draft, type=eps");
753 // if !message.empty() then there was no existing file
754 // "filename" found. In this case LaTeX
755 // draws only a rectangle with the above bb and the
756 // not found filename in it.
757 lyxerr[Debug::GRAPHICS]
758 << "\tMessage = \"" << message << '\"' << endl;
760 // These variables collect all the latex code that should be before and
761 // after the actual includegraphics command.
764 // Do we want subcaptions?
765 if (params().subcaption) {
766 if (runparams.moving_arg)
767 before += "\\protect";
768 before += "\\subfigure[" + params().subcaptionText + "]{";
772 if (runparams.moving_arg)
773 before += "\\protect";
775 // We never use the starred form, we use the "clip" option instead.
776 before += "\\includegraphics";
778 // Write the options if there are any.
779 string const opts = createLatexOptions();
780 lyxerr[Debug::GRAPHICS] << "\tOpts = " << opts << endl;
782 if (!opts.empty() && !message.empty())
783 before += ('[' + opts + ',' + message + ']');
784 else if (!opts.empty() || !message.empty())
785 before += ('[' + opts + message + ']');
787 lyxerr[Debug::GRAPHICS]
788 << "\tBefore = " << before
789 << "\n\tafter = " << after << endl;
791 string latex_str = before + '{';
792 // Convert the file if necessary.
793 // Remove the extension so LaTeX will use whatever is appropriate
794 // (when there are several versions in different formats)
795 latex_str += prepareFile(buf, runparams);
796 latex_str += '}' + after;
798 os << from_utf8(latex_str);
800 lyxerr[Debug::GRAPHICS] << "InsetGraphics::latex outputting:\n"
801 << latex_str << endl;
802 // Return how many newlines we issued.
803 return int(lyx::count(latex_str.begin(), latex_str.end(),'\n'));
807 int InsetGraphics::plaintext(Buffer const &, odocstream & os,
808 OutputParams const &) const
810 // No graphics in ascii output. Possible to use gifscii to convert
811 // images to ascii approximation.
812 // 1. Convert file to ascii using gifscii
813 // 2. Read ascii output file and add it to the output stream.
814 // at least we send the filename
816 // FIXME: We have no idea what the encoding of the filename is
817 os << '<' << bformat(_("Graphics file: %1$s"),
818 from_utf8(params().filename.absFilename()))
826 int writeImageObject(char * format, odocstream & os, OutputParams const & runparams,
827 docstring const graphic_label, docstring const attributes)
829 if (runparams.flavor != OutputParams::XML) {
830 os << "<![ %output.print."
835 os <<"<imageobject><imagedata fileref=\"&"
841 if (runparams.flavor == OutputParams::XML) {
842 os << " role=\"" << format << "\"/>" ;
845 os << " format=\"" << format << "\">" ;
847 os << "</imageobject>";
848 if (runparams.flavor != OutputParams::XML) {
849 os << std::endl << "]]>" ;
851 return runparams.flavor == OutputParams::XML ? 0 : 2;
853 // end anonymous namespace
857 // For explanation on inserting graphics into DocBook checkout:
858 // http://en.tldp.org/LDP/LDP-Author-Guide/html/inserting-pictures.html
859 // See also the docbook guide at http://www.docbook.org/
860 int InsetGraphics::docbook(Buffer const &, odocstream & os,
861 OutputParams const & runparams) const
863 // In DocBook v5.0, the graphic tag will be eliminated from DocBook, will
864 // need to switch to MediaObject. However, for now this is sufficient and
866 if (runparams.flavor == OutputParams::XML) {
867 runparams.exportdata->addExternalFile("docbook-xml",
870 runparams.exportdata->addExternalFile("docbook",
873 os << "<inlinemediaobject>";
876 docstring attributes = createDocBookAttributes();
877 r += writeImageObject("png", os, runparams, graphic_label, attributes);
878 r += writeImageObject("pdf", os, runparams, graphic_label, attributes);
879 r += writeImageObject("eps", os, runparams, graphic_label, attributes);
880 r += writeImageObject("bmp", os, runparams, graphic_label, attributes);
882 os << "</inlinemediaobject>";
887 void InsetGraphics::validate(LaTeXFeatures & features) const
889 // If we have no image, we should not require anything.
890 if (params().filename.empty())
893 features.includeFile(graphic_label,
894 removeExtension(params().filename.absFilename()));
896 features.require("graphicx");
898 if (features.runparams().nice) {
899 Buffer const * m_buffer = features.buffer().getMasterBuffer();
900 string const rel_file = removeExtension(params().filename.relFilename(m_buffer->filePath()));
901 if (contains(rel_file, "."))
902 features.require("lyxdot");
905 if (params().subcaption)
906 features.require("subfigure");
910 bool InsetGraphics::setParams(InsetGraphicsParams const & p)
912 // If nothing is changed, just return and say so.
913 if (params() == p && !p.filename.empty())
916 // Copy the new parameters.
919 // Update the display using the new parameters.
920 graphic_->update(params().as_grfxParams());
922 // We have changed data, report it.
927 InsetGraphicsParams const & InsetGraphics::params() const
933 void InsetGraphics::editGraphics(InsetGraphicsParams const & p,
934 Buffer const & buffer) const
936 formats.edit(buffer, p.filename,
937 formats.getFormatFromFile(p.filename));
941 string const InsetGraphicsMailer::name_("graphics");
943 InsetGraphicsMailer::InsetGraphicsMailer(InsetGraphics & inset)
948 string const InsetGraphicsMailer::inset2string(Buffer const & buffer) const
950 return params2string(inset_.params(), buffer);
954 void InsetGraphicsMailer::string2params(string const & in,
955 Buffer const & buffer,
956 InsetGraphicsParams & params)
958 params = InsetGraphicsParams();
962 istringstream data(in);
968 if (!lex || name != name_)
969 return print_mailer_error("InsetGraphicsMailer", in, 1, name_);
972 inset.readInsetGraphics(lex, buffer.filePath());
973 params = inset.params();
978 InsetGraphicsMailer::params2string(InsetGraphicsParams const & params,
979 Buffer const & buffer)
982 data << name_ << ' ';
983 params.Write(data, buffer.filePath());
984 data << "\\end_inset\n";