2 * \file InsetGraphics.cpp
3 * This file is part of LyX, the document processor.
4 * Licence details can be found in the file COPYING.
9 * Full author contact details are available in file CREDITS.
15 * What advanced features the users want to do?
16 Implement them in a non latex dependent way, but a logical way.
17 LyX should translate it to latex or any other fitting format.
18 * When loading, if the image is not found in the expected place, try
19 to find it in the clipart, or in the same directory with the image.
20 * The image choosing dialog could show thumbnails of the image formats
21 it knows of, thus selection based on the image instead of based on
23 * Add support for the 'picins' package.
24 * Add support for the 'picinpar' package.
29 * The filename is kept in the lyx file in a relative way, so as to allow
30 * moving the document file and its images with no problem.
34 * Postscript output means EPS figures.
36 * PDF output is best done with PDF figures if it's a direct conversion
37 * or PNG figures otherwise.
49 #include "insets/InsetGraphics.h"
50 #include "insets/RenderGraphic.h"
53 #include "BufferView.h"
54 #include "Converter.h"
56 #include "DispatchResult.h"
57 #include "ErrorList.h"
60 #include "FuncRequest.h"
61 #include "FuncStatus.h"
62 #include "LaTeXFeatures.h"
65 #include "MetricsInfo.h"
67 #include "OutputParams.h"
69 #include "TocBackend.h"
71 #include "frontends/alert.h"
72 #include "frontends/Application.h"
74 #include "support/convert.h"
75 #include "support/debug.h"
76 #include "support/docstream.h"
77 #include "support/ExceptionMessage.h"
78 #include "support/filetools.h"
79 #include "support/gettext.h"
80 #include "support/lyxlib.h"
81 #include "support/lstrings.h"
82 #include "support/os.h"
83 #include "support/Systemcall.h"
85 #include <boost/bind.hpp>
86 #include <boost/tuple/tuple.hpp>
92 using namespace lyx::support;
96 namespace Alert = frontend::Alert;
100 /// Find the most suitable image format for images in \p format
101 /// Note that \p format may be unknown (i. e. an empty string)
102 string findTargetFormat(string const & format, OutputParams const & runparams)
104 // Are we using latex or pdflatex?
105 if (runparams.flavor == OutputParams::PDFLATEX) {
106 LYXERR(Debug::GRAPHICS, "findTargetFormat: PDF mode");
107 Format const * const f = formats.getFormat(format);
108 // Convert vector graphics to pdf
109 if (f && f->vectorFormat())
111 // pdflatex can use jpeg, png and pdf directly
114 // Convert everything else to png
117 // If it's postscript, we always do eps.
118 LYXERR(Debug::GRAPHICS, "findTargetFormat: PostScript mode");
120 // any other than ps is changed to eps
127 void readInsetGraphics(Lexer & lex, string const & bufpath,
128 InsetGraphicsParams & params)
130 bool finished = false;
132 while (lex.isOK() && !finished) {
135 string const token = lex.getString();
136 LYXERR(Debug::GRAPHICS, "Token: '" << token << '\'');
141 if (token == "\\end_inset") {
144 if (!params.Read(lex, token, bufpath))
145 lyxerr << "Unknown token, " << token << ", skipping."
154 InsetGraphics::InsetGraphics(Buffer & buf)
155 : graphic_label(sgml::uniqueID(from_ascii("graph"))),
156 graphic_(new RenderGraphic(this))
158 Inset::setBuffer(buf);
162 InsetGraphics::InsetGraphics(InsetGraphics const & ig)
164 boost::signals::trackable(),
165 graphic_label(sgml::uniqueID(from_ascii("graph"))),
166 graphic_(new RenderGraphic(*ig.graphic_, this))
168 setParams(ig.params());
172 Inset * InsetGraphics::clone() const
174 return new InsetGraphics(*this);
178 InsetGraphics::~InsetGraphics()
180 hideDialogs("graphics", this);
184 void InsetGraphics::doDispatch(Cursor & cur, FuncRequest & cmd)
186 switch (cmd.action) {
187 case LFUN_GRAPHICS_EDIT: {
188 InsetGraphicsParams p = params();
189 if (!cmd.argument().empty())
190 string2params(to_utf8(cmd.argument()), buffer(), p);
191 editGraphics(p, buffer());
195 case LFUN_INSET_MODIFY: {
196 InsetGraphicsParams p;
197 string2params(to_utf8(cmd.argument()), buffer(), p);
198 if (!p.filename.empty())
205 case LFUN_INSET_DIALOG_UPDATE:
206 cur.bv().updateDialog("graphics", params2string(params(),
210 case LFUN_MOUSE_RELEASE:
211 if (!cur.selection() && cmd.button() == mouse_button::button1)
212 cur.bv().showDialog("graphics", params2string(params(),
213 cur.bv().buffer()), this);
217 Inset::doDispatch(cur, cmd);
223 bool InsetGraphics::getStatus(Cursor & cur, FuncRequest const & cmd,
224 FuncStatus & flag) const
226 switch (cmd.action) {
227 case LFUN_GRAPHICS_EDIT:
228 case LFUN_INSET_MODIFY:
229 case LFUN_INSET_DIALOG_UPDATE:
234 return Inset::getStatus(cur, cmd, flag);
239 void InsetGraphics::edit(Cursor & cur, bool, EntryDirection)
241 cur.bv().showDialog("graphics", params2string(params(),
242 cur.bv().buffer()), this);
246 void InsetGraphics::metrics(MetricsInfo & mi, Dimension & dim) const
248 graphic_->metrics(mi, dim);
252 void InsetGraphics::draw(PainterInfo & pi, int x, int y) const
254 graphic_->draw(pi, x, y);
258 Inset::EDITABLE InsetGraphics::editable() const
264 void InsetGraphics::write(ostream & os) const
267 params().Write(os, buffer());
271 void InsetGraphics::read(Lexer & lex)
273 lex.setContext("InsetGraphics::read");
275 readInsetGraphics(lex, buffer().filePath(), params_);
276 graphic_->update(params().as_grfxParams());
280 string InsetGraphics::createLatexOptions() const
282 // Calculate the options part of the command, we must do it to a string
283 // stream since we might have a trailing comma that we would like to remove
284 // before writing it to the output stream.
285 ostringstream options;
286 if (!params().bb.empty())
287 options << "bb=" << rtrim(params().bb) << ',';
293 double const scl = convert<double>(params().scale);
294 if (!params().scale.empty() && !float_equal(scl, 0.0, 0.05)) {
295 if (!float_equal(scl, 100.0, 0.05))
296 size << "scale=" << scl / 100.0 << ',';
298 if (!params().width.zero())
299 size << "width=" << params().width.asLatexString() << ',';
300 if (!params().height.zero())
301 size << "height=" << params().height.asLatexString() << ',';
302 if (params().keepAspectRatio)
303 size << "keepaspectratio,";
305 if (params().scaleBeforeRotation && !size.str().empty())
306 options << size.str();
308 // Make sure rotation angle is not very close to zero;
309 // a float can be effectively zero but not exactly zero.
310 if (!params().rotateAngle.empty()
311 && !float_equal(convert<double>(params().rotateAngle), 0.0, 0.001)) {
312 options << "angle=" << params().rotateAngle << ',';
313 if (!params().rotateOrigin.empty()) {
314 options << "origin=" << params().rotateOrigin[0];
315 if (contains(params().rotateOrigin,"Top"))
317 else if (contains(params().rotateOrigin,"Bottom"))
319 else if (contains(params().rotateOrigin,"Baseline"))
324 if (!params().scaleBeforeRotation && !size.str().empty())
325 options << size.str();
327 if (!params().special.empty())
328 options << params().special << ',';
330 string opts = options.str();
332 if (suffixIs(opts, ','))
333 opts = opts.substr(0, opts.size() - 1);
339 docstring InsetGraphics::toDocbookLength(Length const & len) const
341 odocstringstream result;
342 switch (len.unit()) {
343 case Length::SP: // Scaled point (65536sp = 1pt) TeX's smallest unit.
344 result << len.value() * 65536.0 * 72 / 72.27 << "pt";
346 case Length::PT: // Point = 1/72.27in = 0.351mm
347 result << len.value() * 72 / 72.27 << "pt";
349 case Length::BP: // Big point (72bp = 1in), also PostScript point
350 result << len.value() << "pt";
352 case Length::DD: // Didot point = 1/72 of a French inch, = 0.376mm
353 result << len.value() * 0.376 << "mm";
355 case Length::MM: // Millimeter = 2.845pt
356 result << len.value() << "mm";
358 case Length::PC: // Pica = 12pt = 4.218mm
359 result << len.value() << "pc";
361 case Length::CC: // Cicero = 12dd = 4.531mm
362 result << len.value() * 4.531 << "mm";
364 case Length::CM: // Centimeter = 10mm = 2.371pc
365 result << len.value() << "cm";
367 case Length::IN: // Inch = 25.4mm = 72.27pt = 6.022pc
368 result << len.value() << "in";
370 case Length::EX: // Height of a small "x" for the current font.
371 // Obviously we have to compromise here. Any better ratio than 1.5 ?
372 result << len.value() / 1.5 << "em";
374 case Length::EM: // Width of capital "M" in current font.
375 result << len.value() << "em";
377 case Length::MU: // Math unit (18mu = 1em) for positioning in math mode
378 result << len.value() * 18 << "em";
380 case Length::PTW: // Percent of TextWidth
381 case Length::PCW: // Percent of ColumnWidth
382 case Length::PPW: // Percent of PageWidth
383 case Length::PLW: // Percent of LineWidth
384 case Length::PTH: // Percent of TextHeight
385 case Length::PPH: // Percent of Paper
386 // Sigh, this will go wrong.
387 result << len.value() << "%";
390 result << len.asDocstring();
397 docstring InsetGraphics::createDocBookAttributes() const
399 // Calculate the options part of the command, we must do it to a string
400 // stream since we copied the code from createLatexParams() ;-)
402 // FIXME: av: need to translate spec -> Docbook XSL spec
403 // (http://www.sagehill.net/docbookxsl/ImageSizing.html)
404 // Right now it only works with my version of db2latex :-)
406 odocstringstream options;
407 double const scl = convert<double>(params().scale);
408 if (!params().scale.empty() && !float_equal(scl, 0.0, 0.05)) {
409 if (!float_equal(scl, 100.0, 0.05))
410 options << " scale=\""
411 << static_cast<int>( (scl) + 0.5 )
414 if (!params().width.zero()) {
415 options << " width=\"" << toDocbookLength(params().width) << "\" ";
417 if (!params().height.zero()) {
418 options << " depth=\"" << toDocbookLength(params().height) << "\" ";
420 if (params().keepAspectRatio) {
421 // This will be irrelevant unless both width and height are set
422 options << "scalefit=\"1\" ";
427 if (!params().special.empty())
428 options << from_ascii(params().special) << " ";
430 // trailing blanks are ok ...
431 return options.str();
437 enum GraphicsCopyStatus {
445 pair<GraphicsCopyStatus, FileName> const
446 copyFileIfNeeded(FileName const & file_in, FileName const & file_out)
448 LYXERR(Debug::FILES, "Comparing " << file_in << " and " << file_out);
449 unsigned long const checksum_in = file_in.checksum();
450 unsigned long const checksum_out = file_out.checksum();
452 if (checksum_in == checksum_out)
454 return make_pair(IDENTICAL_CONTENTS, file_out);
456 Mover const & mover = getMover(formats.getFormatFromFile(file_in));
457 bool const success = mover.copy(file_in, file_out);
460 LYXERR(Debug::GRAPHICS,
461 to_utf8(bformat(_("Could not copy the file\n%1$s\n"
462 "into the temporary directory."),
463 from_utf8(file_in.absFilename()))));
466 GraphicsCopyStatus status = success ? SUCCESS : FAILURE;
467 return make_pair(status, file_out);
471 pair<GraphicsCopyStatus, FileName> const
472 copyToDirIfNeeded(DocFileName const & file, string const & dir)
474 string const file_in = file.absFilename();
475 string const only_path = onlyPath(file_in);
476 if (rtrim(onlyPath(file_in) , "/") == rtrim(dir, "/"))
477 return make_pair(IDENTICAL_PATHS, file_in);
479 string mangled = file.mangledFilename();
480 if (file.isZipped()) {
481 // We need to change _eps.gz to .eps.gz. The mangled name is
482 // still unique because of the counter in mangledFilename().
483 // We can't just call mangledFilename() with the zip
484 // extension removed, because base.eps and base.eps.gz may
485 // have different content but would get the same mangled
486 // name in this case.
487 string const base = removeExtension(file.unzippedFilename());
488 string::size_type const ext_len = file_in.length() - base.length();
489 mangled[mangled.length() - ext_len] = '.';
491 FileName const file_out(makeAbsPath(mangled, dir));
493 return copyFileIfNeeded(file, file_out);
497 string const stripExtensionIfPossible(string const & file, bool nice)
499 // Remove the extension so the LaTeX compiler will use whatever
500 // is appropriate (when there are several versions in different
502 // Do this only if we are not exporting for internal usage, because
503 // pdflatex prefers png over pdf and it would pick up the png images
504 // that we generate for preview.
505 // This works only if the filename contains no dots besides
506 // the just removed one. We can fool here by replacing all
507 // dots with a macro whose definition is just a dot ;-)
508 // The automatic format selection does not work if the file
510 string const latex_name = latex_path(file, EXCLUDE_EXTENSION);
511 if (!nice || contains(latex_name, '"'))
513 return latex_path(removeExtension(file), PROTECT_EXTENSION, ESCAPE_DOTS);
517 string const stripExtensionIfPossible(string const & file, string const & to, bool nice)
519 // No conversion is needed. LaTeX can handle the graphic file as is.
520 // This is true even if the orig_file is compressed.
521 string const to_format = formats.getFormat(to)->extension();
522 string const file_format = getExtension(file);
523 // for latex .ps == .eps
524 if (to_format == file_format ||
525 (to_format == "eps" && file_format == "ps") ||
526 (to_format == "ps" && file_format == "eps"))
527 return stripExtensionIfPossible(file, nice);
528 return latex_path(file, EXCLUDE_EXTENSION);
534 string InsetGraphics::prepareFile(OutputParams const & runparams) const
536 // The following code depends on non-empty filenames
537 if (params().filename.empty())
540 string const orig_file = params().filename.absFilename();
541 // this is for dryrun and display purposes, do not use latexFilename
542 string const rel_file = params().filename.relFilename(buffer().filePath());
544 // previewing source code, no file copying or file format conversion
545 if (runparams.dryrun)
546 return stripExtensionIfPossible(rel_file, runparams.nice);
548 // temp_file will contain the file for LaTeX to act on if, for example,
549 // we move it to a temp dir or uncompress it.
550 FileName temp_file = params().filename;
552 // The master buffer. This is useful when there are multiple levels
554 Buffer const * masterBuffer = buffer().masterBuffer();
556 // Return the output name if we are inside a comment or the file does
558 // We are not going to change the extension or using the name of the
559 // temporary file, the code is already complicated enough.
560 if (runparams.inComment || !params().filename.isReadableFile())
561 return params().filename.outputFilename(masterBuffer->filePath());
563 // We place all temporary files in the master buffer's temp dir.
564 // This is possible because we use mangled file names.
565 // This is necessary for DVI export.
566 string const temp_path = masterBuffer->temppath();
568 GraphicsCopyStatus status;
569 boost::tie(status, temp_file) =
570 copyToDirIfNeeded(params().filename, temp_path);
572 if (status == FAILURE)
575 // a relative filename should be relative to the master buffer.
576 // "nice" means that the buffer is exported to LaTeX format but not
577 // run through the LaTeX compiler.
578 string output_file = runparams.nice ?
579 params().filename.outputFilename(masterBuffer->filePath()) :
580 onlyFilename(temp_file.absFilename());
582 if (runparams.nice && !isValidLaTeXFilename(output_file)) {
583 frontend::Alert::warning(_("Invalid filename"),
584 _("The following filename is likely to cause trouble "
585 "when running the exported file through LaTeX: ") +
586 from_utf8(output_file));
589 FileName source_file = runparams.nice ? FileName(params().filename) : temp_file;
590 string const tex_format = (runparams.flavor == OutputParams::LATEX) ?
591 "latex" : "pdflatex";
593 // If the file is compressed and we have specified that it
594 // should not be uncompressed, then just return its name and
595 // let LaTeX do the rest!
596 if (params().filename.isZipped()) {
597 if (params().noUnzip) {
598 // We don't know whether latex can actually handle
599 // this file, but we can't check, because that would
600 // mean to unzip the file and thereby making the
601 // noUnzip parameter meaningless.
602 LYXERR(Debug::GRAPHICS, "\tpass zipped file to LaTeX.");
604 FileName const bb_orig_file = FileName(changeExtension(orig_file, "bb"));
605 if (runparams.nice) {
606 runparams.exportdata->addExternalFile(tex_format,
608 changeExtension(output_file, "bb"));
610 // LaTeX needs the bounding box file in the
612 FileName bb_file = FileName(changeExtension(temp_file.absFilename(), "bb"));
613 boost::tie(status, bb_file) =
614 copyFileIfNeeded(bb_orig_file, bb_file);
615 if (status == FAILURE)
617 runparams.exportdata->addExternalFile(tex_format,
620 runparams.exportdata->addExternalFile(tex_format,
621 source_file, output_file);
622 runparams.exportdata->addExternalFile("dvi",
623 source_file, output_file);
624 // We can't strip the extension, because we don't know
625 // the unzipped file format
626 return latex_path(output_file, EXCLUDE_EXTENSION);
629 FileName const unzipped_temp_file =
630 FileName(unzippedFileName(temp_file.absFilename()));
631 output_file = unzippedFileName(output_file);
632 source_file = FileName(unzippedFileName(source_file.absFilename()));
633 if (compare_timestamps(unzipped_temp_file, temp_file) > 0) {
634 // temp_file has been unzipped already and
635 // orig_file has not changed in the meantime.
636 temp_file = unzipped_temp_file;
637 LYXERR(Debug::GRAPHICS, "\twas already unzipped to " << temp_file);
639 // unzipped_temp_file does not exist or is too old
640 temp_file = unzipFile(temp_file);
641 LYXERR(Debug::GRAPHICS, "\tunzipped to " << temp_file);
645 string const from = formats.getFormatFromFile(temp_file);
647 LYXERR(Debug::GRAPHICS, "\tCould not get file format.");
649 string const to = findTargetFormat(from, runparams);
650 string const ext = formats.extension(to);
651 LYXERR(Debug::GRAPHICS, "\t we have: from " << from << " to " << to);
653 // We're going to be running the exported buffer through the LaTeX
654 // compiler, so must ensure that LaTeX can cope with the graphics
657 LYXERR(Debug::GRAPHICS, "\tthe orig file is: " << orig_file);
660 if (!runparams.nice && getExtension(temp_file.absFilename()) != ext) {
661 // The LaTeX compiler will not be able to determine
662 // the file format from the extension, so we must
664 FileName const new_file = FileName(changeExtension(temp_file.absFilename(), ext));
665 if (temp_file.moveTo(new_file)) {
666 temp_file = new_file;
667 output_file = changeExtension(output_file, ext);
668 source_file = FileName(changeExtension(source_file.absFilename(), ext));
670 LYXERR(Debug::GRAPHICS, "Could not rename file `"
671 << temp_file << "' to `" << new_file << "'.");
674 // The extension of temp_file might be != ext!
675 runparams.exportdata->addExternalFile(tex_format, source_file,
677 runparams.exportdata->addExternalFile("dvi", source_file,
679 return stripExtensionIfPossible(output_file, to, runparams.nice);
682 FileName const to_file = FileName(changeExtension(temp_file.absFilename(), ext));
683 string const output_to_file = changeExtension(output_file, ext);
685 // Do we need to perform the conversion?
686 // Yes if to_file does not exist or if temp_file is newer than to_file
687 if (compare_timestamps(temp_file, to_file) < 0) {
689 LYXERR(Debug::GRAPHICS,
690 to_utf8(bformat(_("No conversion of %1$s is needed after all"),
691 from_utf8(rel_file))));
692 runparams.exportdata->addExternalFile(tex_format, to_file,
694 runparams.exportdata->addExternalFile("dvi", to_file,
696 return stripExtensionIfPossible(output_to_file, runparams.nice);
699 LYXERR(Debug::GRAPHICS,"\tThe original file is " << orig_file << "\n"
700 << "\tA copy has been made and convert is to be called with:\n"
701 << "\tfile to convert = " << temp_file << '\n'
702 << "\t from " << from << " to " << to);
704 // FIXME (Abdel 12/08/06): Is there a need to show these errors?
706 if (theConverters().convert(&buffer(), temp_file, to_file, params().filename,
708 Converters::try_default | Converters::try_cache)) {
709 runparams.exportdata->addExternalFile(tex_format,
710 to_file, output_to_file);
711 runparams.exportdata->addExternalFile("dvi",
712 to_file, output_to_file);
715 return stripExtensionIfPossible(output_to_file, runparams.nice);
719 int InsetGraphics::latex(odocstream & os,
720 OutputParams const & runparams) const
722 // If there is no file specified or not existing,
723 // just output a message about it in the latex output.
724 LYXERR(Debug::GRAPHICS, "insetgraphics::latex: Filename = "
725 << params().filename.absFilename());
727 bool const file_exists = !params().filename.empty()
728 && params().filename.isReadableFile();
729 string const message = file_exists ?
730 string() : string("bb = 0 0 200 100, draft, type=eps");
731 // if !message.empty() then there was no existing file
732 // "filename" found. In this case LaTeX
733 // draws only a rectangle with the above bb and the
734 // not found filename in it.
735 LYXERR(Debug::GRAPHICS, "\tMessage = \"" << message << '\"');
737 // These variables collect all the latex code that should be before and
738 // after the actual includegraphics command.
742 if (runparams.moving_arg)
743 before += "\\protect";
745 // We never use the starred form, we use the "clip" option instead.
746 before += "\\includegraphics";
748 // Write the options if there are any.
749 string const opts = createLatexOptions();
750 LYXERR(Debug::GRAPHICS, "\tOpts = " << opts);
752 if (!opts.empty() && !message.empty())
753 before += ('[' + opts + ',' + message + ']');
754 else if (!opts.empty() || !message.empty())
755 before += ('[' + opts + message + ']');
757 LYXERR(Debug::GRAPHICS, "\tBefore = " << before << "\n\tafter = " << after);
759 string latex_str = before + '{';
760 // Convert the file if necessary.
761 // Remove the extension so LaTeX will use whatever is appropriate
762 // (when there are several versions in different formats)
763 latex_str += prepareFile(runparams);
764 latex_str += '}' + after;
766 os << from_utf8(latex_str);
768 LYXERR(Debug::GRAPHICS, "InsetGraphics::latex outputting:\n" << latex_str);
769 // Return how many newlines we issued.
770 return int(count(latex_str.begin(), latex_str.end(),'\n'));
774 int InsetGraphics::plaintext(odocstream & os, OutputParams const &) const
776 // No graphics in ascii output. Possible to use gifscii to convert
777 // images to ascii approximation.
778 // 1. Convert file to ascii using gifscii
779 // 2. Read ascii output file and add it to the output stream.
780 // at least we send the filename
782 // FIXME: We have no idea what the encoding of the filename is
784 docstring const str = bformat(buffer().B_("Graphics file: %1$s"),
785 from_utf8(params().filename.absFilename()));
786 os << '<' << str << '>';
788 return 2 + str.size();
792 static int writeImageObject(char const * format, odocstream & os,
793 OutputParams const & runparams, docstring const & graphic_label,
794 docstring const & attributes)
796 if (runparams.flavor != OutputParams::XML)
797 os << "<![ %output.print." << format
800 os <<"<imageobject><imagedata fileref=\"&"
807 if (runparams.flavor == OutputParams::XML)
808 os << " role=\"" << format << "\"/>" ;
810 os << " format=\"" << format << "\">" ;
812 os << "</imageobject>";
814 if (runparams.flavor != OutputParams::XML)
815 os << endl << "]]>" ;
817 return runparams.flavor == OutputParams::XML ? 0 : 2;
821 // For explanation on inserting graphics into DocBook checkout:
822 // http://en.tldp.org/LDP/LDP-Author-Guide/html/inserting-pictures.html
823 // See also the docbook guide at http://www.docbook.org/
824 int InsetGraphics::docbook(odocstream & os,
825 OutputParams const & runparams) const
827 // In DocBook v5.0, the graphic tag will be eliminated from DocBook, will
828 // need to switch to MediaObject. However, for now this is sufficient and
830 if (runparams.flavor == OutputParams::XML)
831 runparams.exportdata->addExternalFile("docbook-xml",
834 runparams.exportdata->addExternalFile("docbook",
837 os << "<inlinemediaobject>";
840 docstring attributes = createDocBookAttributes();
841 r += writeImageObject("png", os, runparams, graphic_label, attributes);
842 r += writeImageObject("pdf", os, runparams, graphic_label, attributes);
843 r += writeImageObject("eps", os, runparams, graphic_label, attributes);
844 r += writeImageObject("bmp", os, runparams, graphic_label, attributes);
846 os << "</inlinemediaobject>";
851 void InsetGraphics::validate(LaTeXFeatures & features) const
853 // If we have no image, we should not require anything.
854 if (params().filename.empty())
857 features.includeFile(graphic_label,
858 removeExtension(params().filename.absFilename()));
860 features.require("graphicx");
862 if (features.runparams().nice) {
863 Buffer const * masterBuffer = features.buffer().masterBuffer();
864 string const rel_file = removeExtension(params().filename.relFilename(masterBuffer->filePath()));
865 if (contains(rel_file, "."))
866 features.require("lyxdot");
871 bool InsetGraphics::setParams(InsetGraphicsParams const & p)
873 // If nothing is changed, just return and say so.
874 if (params() == p && !p.filename.empty())
877 // Copy the new parameters.
880 // Update the display using the new parameters.
881 graphic_->update(params().as_grfxParams());
883 // We have changed data, report it.
888 InsetGraphicsParams const & InsetGraphics::params() const
894 void InsetGraphics::editGraphics(InsetGraphicsParams const & p,
895 Buffer const & buffer) const
897 formats.edit(buffer, p.filename,
898 formats.getFormatFromFile(p.filename));
902 void InsetGraphics::addToToc(ParConstIterator const & cpit) const
904 TocBackend & backend = buffer().tocBackend();
906 docstring const str = params_.filename.displayName();
907 backend.toc("graphics").push_back(TocItem(cpit, 0, str));
911 docstring InsetGraphics::contextMenu(BufferView const &, int, int) const
913 return from_ascii("context-graphics");
917 void InsetGraphics::string2params(string const & in, Buffer const & buffer,
918 InsetGraphicsParams & params)
923 istringstream data(in);
926 lex.setContext("InsetGraphics::string2params");
928 params = InsetGraphicsParams();
929 readInsetGraphics(lex, buffer.filePath(), params);
933 string InsetGraphics::params2string(InsetGraphicsParams const & params,
934 Buffer const & buffer)
937 data << "graphics" << ' ';
938 params.Write(data, buffer);
939 data << "\\end_inset\n";