src/BufferView.cpp

   1 /**
   2  * \file BufferView.cpp
   3  * This file is part of LyX, the document processor.
   4  * Licence details can be found in the file COPYING.
   5  *
   6  * \author Alfredo Braunstein
   7  * \author Lars Gullik Bjønnes
   8  * \author John Levon
   9  * \author André Pönitz
  10  * \author Jürgen Vigna
  11  *
  12  * Full author contact details are available in file CREDITS.
  13  */
  14
  15 #include <config.h>
  16
  17 #include "BufferView.h"
  18
  19 #include "BranchList.h"
  20 #include "Buffer.h"
  21 #include "buffer_funcs.h"
  22 #include "BufferList.h"
  23 #include "BufferParams.h"
  24 #include "CoordCache.h"
  25 #include "Cursor.h"
  26 #include "CutAndPaste.h"
  27 #include "DispatchResult.h"
  28 #include "ErrorList.h"
  29 #include "factory.h"
  30 #include "FloatList.h"
  31 #include "FuncRequest.h"
  32 #include "FuncStatus.h"
  33 #include "Intl.h"
  34 #include "InsetIterator.h"
  35 #include "Language.h"
  36 #include "LaTeXFeatures.h"
  37 #include "LayoutFile.h"
  38 #include "Length.h"
  39 #include "Lexer.h"
  40 #include "LyX.h"
  41 #include "LyXAction.h"
  42 #include "lyxfind.h"
  43 #include "Layout.h"
  44 #include "LyXRC.h"
  45 #include "MetricsInfo.h"
  46 #include "Paragraph.h"
  47 #include "ParagraphParameters.h"
  48 #include "ParIterator.h"
  49 #include "RowPainter.h"
  50 #include "Session.h"
  51 #include "Text.h"
  52 #include "TextClass.h"
  53 #include "TextMetrics.h"
  54 #include "TexRow.h"
  55 #include "TocBackend.h"
  56 #include "WordLangTuple.h"
  57
  58 #include "insets/InsetBibtex.h"
  59 #include "insets/InsetCitation.h"
  60 #include "insets/InsetCommand.h" // ChangeRefs
  61 #include "insets/InsetExternal.h"
  62 #include "insets/InsetGraphics.h"
  63 #include "insets/InsetNote.h"
  64 #include "insets/InsetRef.h"
  65 #include "insets/InsetText.h"
  66
  67 #include "mathed/MathData.h"
  68
  69 #include "frontends/alert.h"
  70 #include "frontends/Application.h"
  71 #include "frontends/Delegates.h"
  72 #include "frontends/FontMetrics.h"
  73 #include "frontends/Painter.h"
  74 #include "frontends/Selection.h"
  75
  76 #include "support/convert.h"
  77 #include "support/debug.h"
  78 #include "support/ExceptionMessage.h"
  79 #include "support/filetools.h"
  80 #include "support/gettext.h"
  81 #include "support/lassert.h"
  82 #include "support/lstrings.h"
  83 #include "support/Package.h"
  84 #include "support/types.h"
  85
  86 #include <cerrno>
  87 #include <fstream>
  88 #include <functional>
  89 #include <iterator>
  90 #include <sstream>
  91 #include <vector>
  92
  93 using namespace std;
  94 using namespace lyx::support;
  95
  96 namespace lyx {
  97
  98 namespace Alert = frontend::Alert;
  99
 100 namespace {
 101
 102 /// Return an inset of this class if it exists at the current cursor position
 103 template <class T>
 104 T * getInsetByCode(Cursor const & cur, InsetCode code)
 105 {
 106         DocIterator it = cur;
 107         Inset * inset = it.nextInset();
 108         if (inset && inset->lyxCode() == code)
 109                 return static_cast<T*>(inset);
 110         return 0;
 111 }
 112
 113
 114 /// Note that comparing contents can only be used for InsetCommand
 115 bool findNextInset(DocIterator & dit, vector<InsetCode> const & codes,
 116         docstring const & contents)
 117 {
 118         DocIterator tmpdit = dit;
 119
 120         while (tmpdit) {
 121                 Inset const * inset = tmpdit.nextInset();
 122                 if (inset) {
 123                         bool const valid_code = std::find(codes.begin(), codes.end(),
 124                                 inset->lyxCode()) != codes.end();
 125                         InsetCommand const * ic = inset->asInsetCommand();
 126                         bool const same_or_no_contents =  contents.empty()
 127                                 || (ic && (ic->getFirstNonOptParam() == contents));
 128
 129                         if (valid_code && same_or_no_contents) {
 130                                 dit = tmpdit;
 131                                 return true;
 132                         }
 133                 }
 134                 tmpdit.forwardInset();
 135         }
 136
 137         return false;
 138 }
 139
 140
 141 /// Looks for next inset with one of the given codes.
 142 /// Note that same_content can only be used for InsetCommand
 143 bool findInset(DocIterator & dit, vector<InsetCode> const & codes,
 144         bool same_content)
 145 {
 146         docstring contents;
 147         DocIterator tmpdit = dit;
 148         tmpdit.forwardInset();
 149         if (!tmpdit)
 150                 return false;
 151
 152         Inset const * inset = tmpdit.nextInset();
 153         if (same_content && inset) {
 154                 InsetCommand const * ic = inset->asInsetCommand();
 155                 if (ic) {
 156                         bool const valid_code = std::find(codes.begin(), codes.end(),
 157                                 ic->lyxCode()) != codes.end();
 158                         if (valid_code)
 159                                 contents = ic->getFirstNonOptParam();
 160                 }
 161         }
 162
 163         if (!findNextInset(tmpdit, codes, contents)) {
 164                 if (dit.depth() != 1 || dit.pit() != 0 || dit.pos() != 0) {
 165                         Inset * inset = &tmpdit.bottom().inset();
 166                         tmpdit = doc_iterator_begin(&inset->buffer(), inset);
 167                         if (!findNextInset(tmpdit, codes, contents))
 168                                 return false;
 169                 } else {
 170                         return false;
 171                 }
 172         }
 173
 174         dit = tmpdit;
 175         return true;
 176 }
 177
 178
 179 /// Looks for next inset with the given code
 180 void findInset(DocIterator & dit, InsetCode code, bool same_content)
 181 {
 182         findInset(dit, vector<InsetCode>(1, code), same_content);
 183 }
 184
 185
 186 /// Moves cursor to the next inset with one of the given codes.
 187 void gotoInset(BufferView * bv, vector<InsetCode> const & codes,
 188                bool same_content)
 189 {
 190         Cursor tmpcur = bv->cursor();
 191         if (!findInset(tmpcur, codes, same_content)) {
 192                 bv->cursor().message(_("No more insets"));
 193                 return;
 194         }
 195
 196         tmpcur.clearSelection();
 197         bv->setCursor(tmpcur);
 198         bv->showCursor();
 199 }
 200
 201
 202 /// Moves cursor to the next inset with given code.
 203 void gotoInset(BufferView * bv, InsetCode code, bool same_content)
 204 {
 205         gotoInset(bv, vector<InsetCode>(1, code), same_content);
 206 }
 207
 208
 209 /// A map from a Text to the associated text metrics
 210 typedef map<Text const *, TextMetrics> TextMetricsCache;
 211
 212 enum ScreenUpdateStrategy {
 213         NoScreenUpdate,
 214         SingleParUpdate,
 215         FullScreenUpdate,
 216         DecorationUpdate
 217 };
 218
 219 } // anon namespace
 220
 221
 222 /////////////////////////////////////////////////////////////////////
 223 //
 224 // BufferView
 225 //
 226 /////////////////////////////////////////////////////////////////////
 227
 228 struct BufferView::Private
 229 {
 230         Private(BufferView & bv) : update_strategy_(NoScreenUpdate),
 231                 wh_(0), cursor_(bv),
 232                 anchor_pit_(0), anchor_ypos_(0),
 233                 inlineCompletionUniqueChars_(0),
 234                 last_inset_(0), clickable_inset_(false),
 235                 mouse_position_cache_(),
 236                 bookmark_edit_position_(-1), gui_(0),
 237                 horiz_scroll_offset_(0)
 238         {
 239                 xsel_cache_.set = false;
 240         }
 241
 242         ///
 243         ScrollbarParameters scrollbarParameters_;
 244         ///
 245         ScreenUpdateStrategy update_strategy_;
 246         ///
 247         CoordCache coord_cache_;
 248
 249         /// Estimated average par height for scrollbar.
 250         int wh_;
 251         /// this is used to handle XSelection events in the right manner.
 252         struct {
 253                 CursorSlice cursor;
 254                 CursorSlice anchor;
 255                 bool set;
 256         } xsel_cache_;
 257         ///
 258         Cursor cursor_;
 259         ///
 260         pit_type anchor_pit_;
 261         ///
 262         int anchor_ypos_;
 263         ///
 264         vector<int> par_height_;
 265
 266         ///
 267         DocIterator inlineCompletionPos_;
 268         ///
 269         docstring inlineCompletion_;
 270         ///
 271         size_t inlineCompletionUniqueChars_;
 272
 273         /// keyboard mapping object.
 274         Intl intl_;
 275
 276         /// last visited inset.
 277         /** kept to send setMouseHover(false).
 278           * Not owned, so don't delete.
 279           */
 280         Inset const * last_inset_;
 281         /// are we hovering something that we can click
 282         bool clickable_inset_;
 283
 284         /// position of the mouse at the time of the last mouse move
 285         /// This is used to update the hovering status of inset in
 286         /// cases where the buffer is scrolled, but the mouse didn't move.
 287         Point mouse_position_cache_;
 288
 289         // cache for id of the paragraph which was edited the last time
 290         int bookmark_edit_position_;
 291
 292         mutable TextMetricsCache text_metrics_;
 293
 294         /// Whom to notify.
 295         /** Not owned, so don't delete.
 296           */
 297         frontend::GuiBufferViewDelegate * gui_;
 298
 299         /// Cache for Find Next
 300         FuncRequest search_request_cache_;
 301
 302         ///
 303         map<string, Inset *> edited_insets_;
 304
 305         /// When the row where the cursor lies is scrolled, this
 306         /// contains the scroll offset
 307         int horiz_scroll_offset_;
 308         /// a slice pointing to the start of the row where the cursor
 309         /// is (at last draw time)
 310         CursorSlice current_row_slice_;
 311         /// a slice pointing to the start of the row where cursor was
 312         /// at previous draw event
 313         CursorSlice last_row_slice_;
 314 };
 315
 316
 317 BufferView::BufferView(Buffer & buf)
 318         : width_(0), height_(0), full_screen_(false), buffer_(buf),
 319       d(new Private(*this))
 320 {
 321         d->xsel_cache_.set = false;
 322         d->intl_.initKeyMapper(lyxrc.use_kbmap);
 323
 324         d->cursor_.setBuffer(&buf);
 325         d->cursor_.push(buffer_.inset());
 326         d->cursor_.resetAnchor();
 327         d->cursor_.setCurrentFont();
 328
 329         buffer_.updatePreviews();
 330 }
 331
 332
 333 BufferView::~BufferView()
 334 {
 335         // current buffer is going to be switched-off, save cursor pos
 336         // Ideally, the whole cursor stack should be saved, but session
 337         // currently can only handle bottom (whole document) level pit and pos.
 338         // That is to say, if a cursor is in a nested inset, it will be
 339         // restore to the left of the top level inset.
 340         LastFilePosSection::FilePos fp;
 341         fp.pit = d->cursor_.bottom().pit();
 342         fp.pos = d->cursor_.bottom().pos();
 343         theSession().lastFilePos().save(buffer_.fileName(), fp);
 344
 345         if (d->last_inset_)
 346                 d->last_inset_->setMouseHover(this, false);
 347
 348         delete d;
 349 }
 350
 351
 352 int BufferView::rightMargin() const
 353 {
 354         // The value used to be hardcoded to 10, which is 2.5mm at 100dpi
 355         int const default_margin = Length(2.5, Length::MM).inPixels(0);
 356         // The additional test for the case the outliner is opened.
 357         if (!full_screen_ || !lyxrc.full_screen_limit
 358             || width_ < lyxrc.full_screen_width + 2 * default_margin)
 359                 return default_margin;
 360
 361         return (width_ - lyxrc.full_screen_width) / 2;
 362 }
 363
 364
 365 int BufferView::leftMargin() const
 366 {
 367         return rightMargin();
 368 }
 369
 370
 371 bool BufferView::isTopScreen() const
 372 {
 373         return d->scrollbarParameters_.position == d->scrollbarParameters_.min;
 374 }
 375
 376
 377 bool BufferView::isBottomScreen() const
 378 {
 379         return d->scrollbarParameters_.position == d->scrollbarParameters_.max;
 380 }
 381
 382
 383 Intl & BufferView::getIntl()
 384 {
 385         return d->intl_;
 386 }
 387
 388
 389 Intl const & BufferView::getIntl() const
 390 {
 391         return d->intl_;
 392 }
 393
 394
 395 CoordCache & BufferView::coordCache()
 396 {
 397         return d->coord_cache_;
 398 }
 399
 400
 401 CoordCache const & BufferView::coordCache() const
 402 {
 403         return d->coord_cache_;
 404 }
 405
 406
 407 Buffer & BufferView::buffer()
 408 {
 409         return buffer_;
 410 }
 411
 412
 413 Buffer const & BufferView::buffer() const
 414 {
 415         return buffer_;
 416 }
 417
 418
 419 bool BufferView::needsFitCursor() const
 420 {
 421         if (cursorStatus(d->cursor_) == CUR_INSIDE) {
 422                 frontend::FontMetrics const & fm =
 423                         theFontMetrics(d->cursor_.getFont().fontInfo());
 424                 int const asc = fm.maxAscent();
 425                 int const des = fm.maxDescent();
 426                 Point const p = getPos(d->cursor_);
 427                 if (p.y_ - asc >= 0 && p.y_ + des < height_)
 428                         return false;
 429         }
 430         return true;
 431 }
 432
 433
 434 void BufferView::processUpdateFlags(Update::flags flags)
 435 {
 436         // This is close to a hot-path.
 437         LYXERR(Debug::PAINTING, "BufferView::processUpdateFlags()"
 438                 << "[fitcursor = " << (flags & Update::FitCursor)
 439                 << ", forceupdate = " << (flags & Update::Force)
 440                 << ", singlepar = " << (flags & Update::SinglePar)
 441                 << "]  buffer: " << &buffer_);
 442
 443         // FIXME Does this really need doing here? It's done in updateBuffer, and
 444         // if the Buffer doesn't need updating, then do the macros?
 445         buffer_.updateMacros();
 446
 447         // Now do the first drawing step if needed. This consists on updating
 448         // the CoordCache in updateMetrics().
 449         // The second drawing step is done in WorkArea::redraw() if needed.
 450         // FIXME: is this still true now that Buffer::changed() is used all over?
 451
 452         // Case when no explicit update is requested.
 453         if (!flags) {
 454                 // no need to redraw anything.
 455                 d->update_strategy_ = NoScreenUpdate;
 456                 return;
 457         }
 458
 459         if (flags == Update::Decoration) {
 460                 d->update_strategy_ = DecorationUpdate;
 461                 buffer_.changed(false);
 462                 return;
 463         }
 464
 465         if (flags == Update::FitCursor
 466                 || flags == (Update::Decoration | Update::FitCursor)) {
 467                 // tell the frontend to update the screen if needed.
 468                 if (needsFitCursor()) {
 469                         showCursor();
 470                         return;
 471                 }
 472                 if (flags & Update::Decoration) {
 473                         d->update_strategy_ = DecorationUpdate;
 474                         buffer_.changed(false);
 475                         return;
 476                 }
 477                 // no screen update is needed in principle, but this
 478                 // could change if cursor row needs horizontal scrolling.
 479                 d->update_strategy_ = NoScreenUpdate;
 480                 buffer_.changed(false);
 481                 return;
 482         }
 483
 484         bool const full_metrics = flags & Update::Force || !singleParUpdate();
 485
 486         if (full_metrics)
 487                 // We have to update the full screen metrics.
 488                 updateMetrics();
 489
 490         if (!(flags & Update::FitCursor)) {
 491                 // Nothing to do anymore. Trigger a redraw and return
 492                 buffer_.changed(false);
 493                 return;
 494         }
 495
 496         // updateMetrics() does not update paragraph position
 497         // This is done at draw() time. So we need a redraw!
 498         buffer_.changed(false);
 499
 500         if (needsFitCursor()) {
 501                 // The cursor is off screen so ensure it is visible.
 502                 // refresh it:
 503                 showCursor();
 504         }
 505
 506         updateHoveredInset();
 507 }
 508
 509
 510 void BufferView::updateScrollbar()
 511 {
 512         if (height_ == 0 && width_ == 0)
 513                 return;
 514
 515         // We prefer fixed size line scrolling.
 516         d->scrollbarParameters_.single_step = defaultRowHeight();
 517         // We prefer full screen page scrolling.
 518         d->scrollbarParameters_.page_step = height_;
 519
 520         Text & t = buffer_.text();
 521         TextMetrics & tm = d->text_metrics_[&t];
 522
 523         LYXERR(Debug::GUI, " Updating scrollbar: height: "
 524                 << t.paragraphs().size()
 525                 << " curr par: " << d->cursor_.bottom().pit()
 526                 << " default height " << defaultRowHeight());
 527
 528         size_t const parsize = t.paragraphs().size();
 529         if (d->par_height_.size() != parsize) {
 530                 d->par_height_.clear();
 531                 // FIXME: We assume a default paragraph height of 2 rows. This
 532                 // should probably be pondered with the screen width.
 533                 d->par_height_.resize(parsize, defaultRowHeight() * 2);
 534         }
 535
 536         // Look at paragraph heights on-screen
 537         pair<pit_type, ParagraphMetrics const *> first = tm.first();
 538         pair<pit_type, ParagraphMetrics const *> last = tm.last();
 539         for (pit_type pit = first.first; pit <= last.first; ++pit) {
 540                 d->par_height_[pit] = tm.parMetrics(pit).height();
 541                 LYXERR(Debug::SCROLLING, "storing height for pit " << pit << " : "
 542                         << d->par_height_[pit]);
 543         }
 544
 545         int top_pos = first.second->position() - first.second->ascent();
 546         int bottom_pos = last.second->position() + last.second->descent();
 547         bool first_visible = first.first == 0 && top_pos >= 0;
 548         bool last_visible = last.first + 1 == int(parsize) && bottom_pos <= height_;
 549         if (first_visible && last_visible) {
 550                 d->scrollbarParameters_.min = 0;
 551                 d->scrollbarParameters_.max = 0;
 552                 return;
 553         }
 554
 555         d->scrollbarParameters_.min = top_pos;
 556         for (size_t i = 0; i != size_t(first.first); ++i)
 557                 d->scrollbarParameters_.min -= d->par_height_[i];
 558         d->scrollbarParameters_.max = bottom_pos;
 559         for (size_t i = last.first + 1; i != parsize; ++i)
 560                 d->scrollbarParameters_.max += d->par_height_[i];
 561
 562         d->scrollbarParameters_.position = 0;
 563         // The reference is the top position so we remove one page.
 564         if (lyxrc.scroll_below_document)
 565                 d->scrollbarParameters_.max -= minVisiblePart();
 566         else
 567                 d->scrollbarParameters_.max -= d->scrollbarParameters_.page_step;
 568 }
 569
 570
 571 ScrollbarParameters const & BufferView::scrollbarParameters() const
 572 {
 573         return d->scrollbarParameters_;
 574 }
 575
 576
 577 docstring BufferView::toolTip(int x, int y) const
 578 {
 579         // Get inset under mouse, if there is one.
 580         Inset const * covering_inset = getCoveringInset(buffer_.text(), x, y);
 581         if (!covering_inset)
 582                 // No inset, no tooltip...
 583                 return docstring();
 584         return covering_inset->toolTip(*this, x, y);
 585 }
 586
 587
 588 string BufferView::contextMenu(int x, int y) const
 589 {
 590         //If there is a selection, return the containing inset menu
 591         if (d->cursor_.selection())
 592                 return d->cursor_.inset().contextMenu(*this, x, y);
 593
 594         // Get inset under mouse, if there is one.
 595         Inset const * covering_inset = getCoveringInset(buffer_.text(), x, y);
 596         if (covering_inset)
 597                 return covering_inset->contextMenu(*this, x, y);
 598
 599         return buffer_.inset().contextMenu(*this, x, y);
 600 }
 601
 602
 603 void BufferView::scrollDocView(int value, bool update)
 604 {
 605         int const offset = value - d->scrollbarParameters_.position;
 606
 607         // No scrolling at all? No need to redraw anything
 608         if (offset == 0)
 609                 return;
 610
 611         // If the offset is less than 2 screen height, prefer to scroll instead.
 612         if (abs(offset) <= 2 * height_) {
 613                 d->anchor_ypos_ -= offset;
 614                 buffer_.changed(true);
 615                 updateHoveredInset();
 616                 return;
 617         }
 618
 619         // cut off at the top
 620         if (value <= d->scrollbarParameters_.min) {
 621                 DocIterator dit = doc_iterator_begin(&buffer_);
 622                 showCursor(dit, false, update);
 623                 LYXERR(Debug::SCROLLING, "scroll to top");
 624                 return;
 625         }
 626
 627         // cut off at the bottom
 628         if (value >= d->scrollbarParameters_.max) {
 629                 DocIterator dit = doc_iterator_end(&buffer_);
 630                 dit.backwardPos();
 631                 showCursor(dit, false, update);
 632                 LYXERR(Debug::SCROLLING, "scroll to bottom");
 633                 return;
 634         }
 635
 636         // find paragraph at target position
 637         int par_pos = d->scrollbarParameters_.min;
 638         pit_type i = 0;
 639         for (; i != int(d->par_height_.size()); ++i) {
 640                 par_pos += d->par_height_[i];
 641                 if (par_pos >= value)
 642                         break;
 643         }
 644
 645         if (par_pos < value) {
 646                 // It seems we didn't find the correct pit so stay on the safe side and
 647                 // scroll to bottom.
 648                 LYXERR0("scrolling position not found!");
 649                 scrollDocView(d->scrollbarParameters_.max, update);
 650                 return;
 651         }
 652
 653         DocIterator dit = doc_iterator_begin(&buffer_);
 654         dit.pit() = i;
 655         LYXERR(Debug::SCROLLING, "value = " << value << " -> scroll to pit " << i);
 656         showCursor(dit, false, update);
 657 }
 658
 659
 660 // FIXME: this method is not working well.
 661 void BufferView::setCursorFromScrollbar()
 662 {
 663         TextMetrics & tm = d->text_metrics_[&buffer_.text()];
 664
 665         int const height = 2 * defaultRowHeight();
 666         int const first = height;
 667         int const last = height_ - height;
 668         int newy = 0;
 669         Cursor const & oldcur = d->cursor_;
 670
 671         switch (cursorStatus(oldcur)) {
 672         case CUR_ABOVE:
 673                 newy = first;
 674                 break;
 675         case CUR_BELOW:
 676                 newy = last;
 677                 break;
 678         case CUR_INSIDE:
 679                 int const y = getPos(oldcur).y_;
 680                 newy = min(last, max(y, first));
 681                 if (y == newy)
 682                         return;
 683         }
 684         // We reset the cursor because cursorStatus() does not
 685         // work when the cursor is within mathed.
 686         Cursor cur(*this);
 687         cur.reset();
 688         tm.setCursorFromCoordinates(cur, 0, newy);
 689
 690         // update the bufferview cursor and notify insets
 691         // FIXME: Care about the d->cursor_ flags to redraw if needed
 692         Cursor old = d->cursor_;
 693         mouseSetCursor(cur);
 694         // the DEPM call in mouseSetCursor() might have destroyed the
 695         // paragraph the cursor is in.
 696         bool badcursor = old.fixIfBroken();
 697         badcursor |= notifyCursorLeavesOrEnters(old, d->cursor_);
 698         if (badcursor)
 699                 d->cursor_.fixIfBroken();
 700 }
 701
 702
 703 Change const BufferView::getCurrentChange() const
 704 {
 705         if (!d->cursor_.selection())
 706                 return Change(Change::UNCHANGED);
 707
 708         DocIterator dit = d->cursor_.selectionBegin();
 709         // The selected content might have been changed (see #7685)
 710         dit = dit.getInnerText();
 711         return dit.paragraph().lookupChange(dit.pos());
 712 }
 713
 714
 715 // this could be used elsewhere as well?
 716 // FIXME: This does not work within mathed!
 717 CursorStatus BufferView::cursorStatus(DocIterator const & dit) const
 718 {
 719         Point const p = getPos(dit);
 720         if (p.y_ < 0)
 721                 return CUR_ABOVE;
 722         if (p.y_ > workHeight())
 723                 return CUR_BELOW;
 724         return CUR_INSIDE;
 725 }
 726
 727
 728 void BufferView::bookmarkEditPosition()
 729 {
 730         // Don't eat cpu time for each keystroke
 731         if (d->cursor_.paragraph().id() == d->bookmark_edit_position_)
 732                 return;
 733         saveBookmark(0);
 734         d->bookmark_edit_position_ = d->cursor_.paragraph().id();
 735 }
 736
 737
 738 void BufferView::saveBookmark(unsigned int idx)
 739 {
 740         // tentatively save bookmark, id and pos will be used to
 741         // acturately locate a bookmark in a 'live' lyx session.
 742         // pit and pos will be updated with bottom level pit/pos
 743         // when lyx exits.
 744         if (!buffer_.isInternal()) {
 745                 theSession().bookmarks().save(
 746                         buffer_.fileName(),
 747                         d->cursor_.bottom().pit(),
 748                         d->cursor_.bottom().pos(),
 749                         d->cursor_.paragraph().id(),
 750                         d->cursor_.pos(),
 751                         idx
 752                         );
 753                 if (idx)
 754                         // emit message signal.
 755                         message(_("Save bookmark"));
 756         }
 757 }
 758
 759
 760 bool BufferView::moveToPosition(pit_type bottom_pit, pos_type bottom_pos,
 761         int top_id, pos_type top_pos)
 762 {
 763         bool success = false;
 764         DocIterator dit;
 765
 766         d->cursor_.clearSelection();
 767
 768         // if a valid par_id is given, try it first
 769         // This is the case for a 'live' bookmark when unique paragraph ID
 770         // is used to track bookmarks.
 771         if (top_id > 0) {
 772                 dit = buffer_.getParFromID(top_id);
 773                 if (!dit.atEnd()) {
 774                         dit.pos() = min(dit.paragraph().size(), top_pos);
 775                         // Some slices of the iterator may not be
 776                         // reachable (e.g. closed collapsable inset)
 777                         // so the dociterator may need to be
 778                         // shortened. Otherwise, setCursor may crash
 779                         // lyx when the cursor can not be set to these
 780                         // insets.
 781                         size_t const n = dit.depth();
 782                         for (size_t i = 0; i < n; ++i)
 783                                 if (!dit[i].inset().editable()) {
 784                                         dit.resize(i);
 785                                         break;
 786                                 }
 787                         success = true;
 788                 }
 789         }
 790
 791         // if top_id == 0, or searching through top_id failed
 792         // This is the case for a 'restored' bookmark when only bottom
 793         // (document level) pit was saved. Because of this, bookmark
 794         // restoration is inaccurate. If a bookmark was within an inset,
 795         // it will be restored to the left of the outmost inset that contains
 796         // the bookmark.
 797         if (bottom_pit < int(buffer_.paragraphs().size())) {
 798                 dit = doc_iterator_begin(&buffer_);
 799
 800                 dit.pit() = bottom_pit;
 801                 dit.pos() = min(bottom_pos, dit.paragraph().size());
 802                 success = true;
 803         }
 804
 805         if (success) {
 806                 // Note: only bottom (document) level pit is set.
 807                 setCursor(dit);
 808                 // set the current font.
 809                 d->cursor_.setCurrentFont();
 810                 // Do not forget to reset the anchor (see #9912)
 811                 d->cursor_.resetAnchor();
 812                 // To center the screen on this new position we need the
 813                 // paragraph position which is computed at draw() time.
 814                 // So we need a redraw!
 815                 buffer_.changed(false);
 816                 if (needsFitCursor())
 817                         showCursor();
 818         }
 819
 820         return success;
 821 }
 822
 823
 824 void BufferView::translateAndInsert(char_type c, Text * t, Cursor & cur)
 825 {
 826         if (d->cursor_.real_current_font.isRightToLeft()) {
 827                 if (d->intl_.keymap == Intl::PRIMARY)
 828                         d->intl_.keyMapSec();
 829         } else {
 830                 if (d->intl_.keymap == Intl::SECONDARY)
 831                         d->intl_.keyMapPrim();
 832         }
 833
 834         d->intl_.getTransManager().translateAndInsert(c, t, cur);
 835 }
 836
 837
 838 int BufferView::workWidth() const
 839 {
 840         return width_;
 841 }
 842
 843
 844 void BufferView::recenter()
 845 {
 846         showCursor(d->cursor_, true, true);
 847 }
 848
 849
 850 void BufferView::showCursor()
 851 {
 852         showCursor(d->cursor_, false, true);
 853 }
 854
 855
 856 void BufferView::showCursor(DocIterator const & dit,
 857         bool recenter, bool update)
 858 {
 859         if (scrollToCursor(dit, recenter) && update) {
 860                 buffer_.changed(true);
 861                 updateHoveredInset();
 862         }
 863 }
 864
 865
 866 void BufferView::scrollToCursor()
 867 {
 868         if (scrollToCursor(d->cursor_, false)) {
 869                 buffer_.changed(true);
 870                 updateHoveredInset();
 871         }
 872 }
 873
 874
 875 bool BufferView::scrollToCursor(DocIterator const & dit, bool recenter)
 876 {
 877         // We are not properly started yet, delay until resizing is
 878         // done.
 879         if (height_ == 0)
 880                 return false;
 881
 882         LYXERR(Debug::SCROLLING, "recentering!");
 883
 884         CursorSlice const & bot = dit.bottom();
 885         TextMetrics & tm = d->text_metrics_[bot.text()];
 886
 887         pos_type const max_pit = pos_type(bot.text()->paragraphs().size() - 1);
 888         int bot_pit = bot.pit();
 889         if (bot_pit > max_pit) {
 890                 // FIXME: Why does this happen?
 891                 LYXERR0("bottom pit is greater that max pit: "
 892                         << bot_pit << " > " << max_pit);
 893                 bot_pit = max_pit;
 894         }
 895
 896         if (bot_pit == tm.first().first - 1)
 897                 tm.newParMetricsUp();
 898         else if (bot_pit == tm.last().first + 1)
 899                 tm.newParMetricsDown();
 900
 901         if (tm.contains(bot_pit)) {
 902                 ParagraphMetrics const & pm = tm.parMetrics(bot_pit);
 903                 LBUFERR(!pm.rows().empty());
 904                 // FIXME: smooth scrolling doesn't work in mathed.
 905                 CursorSlice const & cs = dit.innerTextSlice();
 906                 int offset = coordOffset(dit).y_;
 907                 int ypos = pm.position() + offset;
 908                 Dimension const & row_dim =
 909                         pm.getRow(cs.pos(), dit.boundary()).dimension();
 910                 int scrolled = 0;
 911                 if (recenter)
 912                         scrolled = scroll(ypos - height_/2);
 913
 914                 // We try to visualize the whole row, if the row height is larger than
 915                 // the screen height, we scroll to a heuristic value of height_ / 4.
 916                 // FIXME: This heuristic value should be replaced by a recursive search
 917                 // for a row in the inset that can be visualized completely.
 918                 else if (row_dim.height() > height_) {
 919                         if (ypos < defaultRowHeight())
 920                                 scrolled = scroll(ypos - height_ / 4);
 921                         else if (ypos > height_ - defaultRowHeight())
 922                                 scrolled = scroll(ypos - 3 * height_ / 4);
 923                 }
 924
 925                 // If the top part of the row falls of the screen, we scroll
 926                 // up to align the top of the row with the top of the screen.
 927                 else if (ypos - row_dim.ascent() < 0 && ypos < height_) {
 928                         int ynew = row_dim.ascent();
 929                         scrolled = scrollUp(ynew - ypos);
 930                 }
 931
 932                 // If the bottom of the row falls of the screen, we scroll down.
 933                 else if (ypos + row_dim.descent() > height_ && ypos > 0) {
 934                         int ynew = height_ - row_dim.descent();
 935                         scrolled = scrollDown(ypos - ynew);
 936                 }
 937
 938                 // else, nothing to do, the cursor is already visible so we just return.
 939                 return scrolled != 0;
 940         }
 941
 942         // fix inline completion position
 943         if (d->inlineCompletionPos_.fixIfBroken())
 944                 d->inlineCompletionPos_ = DocIterator();
 945
 946         tm.redoParagraph(bot_pit);
 947         ParagraphMetrics const & pm = tm.parMetrics(bot_pit);
 948         int offset = coordOffset(dit).y_;
 949
 950         d->anchor_pit_ = bot_pit;
 951         CursorSlice const & cs = dit.innerTextSlice();
 952         Dimension const & row_dim =
 953                 pm.getRow(cs.pos(), dit.boundary()).dimension();
 954
 955         if (recenter)
 956                 d->anchor_ypos_ = height_/2;
 957         else if (d->anchor_pit_ == 0)
 958                 d->anchor_ypos_ = offset + pm.ascent();
 959         else if (d->anchor_pit_ == max_pit)
 960                 d->anchor_ypos_ = height_ - offset - row_dim.descent();
 961         else if (offset > height_)
 962                 d->anchor_ypos_ = height_ - offset - defaultRowHeight();
 963         else
 964                 d->anchor_ypos_ = defaultRowHeight() * 2;
 965
 966         return true;
 967 }
 968
 969
 970 void BufferView::makeDocumentClass()
 971 {
 972         DocumentClassConstPtr olddc = buffer_.params().documentClassPtr();
 973         buffer_.params().makeDocumentClass();
 974         updateDocumentClass(olddc);
 975 }
 976
 977
 978 void BufferView::updateDocumentClass(DocumentClassConstPtr olddc)
 979 {
 980         message(_("Converting document to new document class..."));
 981
 982         StableDocIterator backcur(d->cursor_);
 983         ErrorList & el = buffer_.errorList("Class Switch");
 984         cap::switchBetweenClasses(
 985                         olddc, buffer_.params().documentClassPtr(),
 986                         static_cast<InsetText &>(buffer_.inset()), el);
 987
 988         setCursor(backcur.asDocIterator(&buffer_));
 989
 990         buffer_.errors("Class Switch");
 991 }
 992
 993
 994 /** Return the change status at cursor position, taking into account the
 995  * status at each level of the document iterator (a table in a deleted
 996  * footnote is deleted).
 997  * When \param outer is true, the top slice is not looked at.
 998  */
 999 static Change::Type lookupChangeType(DocIterator const & dit, bool outer = false)
1000 {
1001         size_t const depth = dit.depth() - (outer ? 1 : 0);
1002
1003         for (size_t i = 0 ; i < depth ; ++i) {
1004                 CursorSlice const & slice = dit[i];
1005                 if (!slice.inset().inMathed()
1006                     && slice.pos() < slice.paragraph().size()) {
1007                         Change::Type const ch = slice.paragraph().lookupChange(slice.pos()).type;
1008                         if (ch != Change::UNCHANGED)
1009                                 return ch;
1010                 }
1011         }
1012         return Change::UNCHANGED;
1013 }
1014
1015
1016 bool BufferView::getStatus(FuncRequest const & cmd, FuncStatus & flag)
1017 {
1018         FuncCode const act = cmd.action();
1019
1020         // Can we use a readonly buffer?
1021         if (buffer_.isReadonly()
1022             && !lyxaction.funcHasFlag(act, LyXAction::ReadOnly)
1023             && !lyxaction.funcHasFlag(act, LyXAction::NoBuffer)) {
1024                 flag.message(from_utf8(N_("Document is read-only")));
1025                 flag.setEnabled(false);
1026                 return true;
1027         }
1028
1029         // Are we in a DELETED change-tracking region?
1030         if (lookupChangeType(d->cursor_, true) == Change::DELETED
1031             && !lyxaction.funcHasFlag(act, LyXAction::ReadOnly)
1032             && !lyxaction.funcHasFlag(act, LyXAction::NoBuffer)) {
1033                 flag.message(from_utf8(N_("This portion of the document is deleted.")));
1034                 flag.setEnabled(false);
1035                 return true;
1036         }
1037
1038         Cursor & cur = d->cursor_;
1039
1040         if (cur.getStatus(cmd, flag))
1041                 return true;
1042
1043         switch (act) {
1044
1045         // FIXME: This is a bit problematic because we don't check if this is
1046         // a document BufferView or not for these LFUNs. We probably have to
1047         // dispatch both to currentBufferView() and, if that fails,
1048         // to documentBufferView(); same as we do now for current Buffer and
1049         // document Buffer. Ideally those LFUN should go to Buffer as they
1050         // operate on the full Buffer and the cursor is only needed either for
1051         // an Undo record or to restore a cursor position. But we don't know
1052         // how to do that inside Buffer of course.
1053         case LFUN_BUFFER_PARAMS_APPLY:
1054         case LFUN_LAYOUT_MODULES_CLEAR:
1055         case LFUN_LAYOUT_MODULE_ADD:
1056         case LFUN_LAYOUT_RELOAD:
1057         case LFUN_TEXTCLASS_APPLY:
1058         case LFUN_TEXTCLASS_LOAD:
1059                 flag.setEnabled(!buffer_.isReadonly());
1060                 break;
1061
1062         case LFUN_UNDO:
1063                 // We do not use the LyXAction flag for readonly because Undo sets the
1064                 // buffer clean/dirty status by itself.
1065                 flag.setEnabled(!buffer_.isReadonly() && buffer_.undo().hasUndoStack());
1066                 break;
1067         case LFUN_REDO:
1068                 // We do not use the LyXAction flag for readonly because Redo sets the
1069                 // buffer clean/dirty status by itself.
1070                 flag.setEnabled(!buffer_.isReadonly() && buffer_.undo().hasRedoStack());
1071                 break;
1072         case LFUN_FILE_INSERT_PLAINTEXT_PARA:
1073         case LFUN_FILE_INSERT_PLAINTEXT: {
1074                 docstring const fname = cmd.argument();
1075                 if (!FileName::isAbsolute(to_utf8(fname))) {
1076                         flag.message(_("Absolute filename expected."));
1077                         return false;
1078                 }
1079                 flag.setEnabled(cur.inTexted());
1080                 break;
1081         }
1082         case LFUN_FILE_INSERT:
1083         case LFUN_BOOKMARK_SAVE:
1084                 // FIXME: Actually, these LFUNS should be moved to Text
1085                 flag.setEnabled(cur.inTexted());
1086                 break;
1087
1088         case LFUN_FONT_STATE:
1089         case LFUN_LABEL_INSERT:
1090         case LFUN_INFO_INSERT:
1091         case LFUN_PARAGRAPH_GOTO:
1092         case LFUN_NOTE_NEXT:
1093         case LFUN_REFERENCE_NEXT:
1094         case LFUN_WORD_FIND:
1095         case LFUN_WORD_FIND_FORWARD:
1096         case LFUN_WORD_FIND_BACKWARD:
1097         case LFUN_WORD_REPLACE:
1098         case LFUN_MARK_OFF:
1099         case LFUN_MARK_ON:
1100         case LFUN_MARK_TOGGLE:
1101         case LFUN_SCREEN_RECENTER:
1102         case LFUN_SCREEN_SHOW_CURSOR:
1103         case LFUN_BIBTEX_DATABASE_ADD:
1104         case LFUN_BIBTEX_DATABASE_DEL:
1105         case LFUN_STATISTICS:
1106         case LFUN_KEYMAP_OFF:
1107         case LFUN_KEYMAP_PRIMARY:
1108         case LFUN_KEYMAP_SECONDARY:
1109         case LFUN_KEYMAP_TOGGLE:
1110         case LFUN_INSET_SELECT_ALL:
1111                 flag.setEnabled(true);
1112                 break;
1113
1114         case LFUN_WORD_FINDADV: {
1115                 FindAndReplaceOptions opt;
1116                 istringstream iss(to_utf8(cmd.argument()));
1117                 iss >> opt;
1118                 flag.setEnabled(opt.repl_buf_name.empty()
1119                                 || !buffer_.isReadonly());
1120                 break;
1121         }
1122
1123         case LFUN_LABEL_GOTO:
1124                 flag.setEnabled(!cmd.argument().empty()
1125                     || getInsetByCode<InsetRef>(cur, REF_CODE));
1126                 break;
1127
1128         case LFUN_CHANGES_MERGE:
1129         case LFUN_CHANGE_NEXT:
1130         case LFUN_CHANGE_PREVIOUS:
1131         case LFUN_ALL_CHANGES_ACCEPT:
1132         case LFUN_ALL_CHANGES_REJECT:
1133                 // TODO: context-sensitive enabling of LFUNs
1134                 // In principle, these command should only be enabled if there
1135                 // is a change in the document. However, without proper
1136                 // optimizations, this will inevitably result in poor performance.
1137                 flag.setEnabled(true);
1138                 break;
1139
1140         case LFUN_SCREEN_UP:
1141         case LFUN_SCREEN_DOWN:
1142         case LFUN_SCROLL:
1143         case LFUN_SCREEN_UP_SELECT:
1144         case LFUN_SCREEN_DOWN_SELECT:
1145         case LFUN_INSET_FORALL:
1146                 flag.setEnabled(true);
1147                 break;
1148
1149         case LFUN_LAYOUT_TABULAR:
1150                 flag.setEnabled(cur.innerInsetOfType(TABULAR_CODE));
1151                 break;
1152
1153         case LFUN_LAYOUT:
1154                 flag.setEnabled(!cur.inset().forcePlainLayout(cur.idx()));
1155                 break;
1156
1157         case LFUN_LAYOUT_PARAGRAPH:
1158                 flag.setEnabled(cur.inset().allowParagraphCustomization(cur.idx()));
1159                 break;
1160
1161         case LFUN_BRANCH_ADD_INSERT:
1162                 flag.setEnabled(!(cur.inTexted() && cur.paragraph().isPassThru()));
1163                 break;
1164
1165         case LFUN_DIALOG_SHOW_NEW_INSET:
1166                 // FIXME: this is wrong, but I do not understand the
1167                 // intent (JMarc)
1168                 if (cur.inset().lyxCode() == CAPTION_CODE)
1169                         return cur.inset().getStatus(cur, cmd, flag);
1170                 // FIXME we should consider passthru paragraphs too.
1171                 flag.setEnabled(!(cur.inTexted() && cur.paragraph().isPassThru()));
1172                 break;
1173
1174         case LFUN_CITATION_INSERT: {
1175                 FuncRequest fr(LFUN_INSET_INSERT, "citation");
1176                 // FIXME: This could turn in a recursive hell.
1177                 // Shouldn't we use Buffer::getStatus() instead?
1178                 flag.setEnabled(lyx::getStatus(fr).enabled());
1179                 break;
1180         }
1181         case LFUN_INSET_APPLY: {
1182                 string const name = cmd.getArg(0);
1183                 Inset * inset = editedInset(name);
1184                 if (inset) {
1185                         FuncRequest fr(LFUN_INSET_MODIFY, cmd.argument());
1186                         if (!inset->getStatus(cur, fr, flag)) {
1187                                 // Every inset is supposed to handle this
1188                                 LASSERT(false, break);
1189                         }
1190                 } else {
1191                         FuncRequest fr(LFUN_INSET_INSERT, cmd.argument());
1192                         flag = lyx::getStatus(fr);
1193                 }
1194                 break;
1195         }
1196
1197         default:
1198                 return false;
1199         }
1200
1201         return true;
1202 }
1203
1204
1205 Inset * BufferView::editedInset(string const & name) const
1206 {
1207         map<string, Inset *>::const_iterator it = d->edited_insets_.find(name);
1208         return it == d->edited_insets_.end() ? 0 : it->second;
1209 }
1210
1211
1212 void BufferView::editInset(string const & name, Inset * inset)
1213 {
1214         d->edited_insets_[name] = inset;
1215 }
1216
1217
1218 void BufferView::dispatch(FuncRequest const & cmd, DispatchResult & dr)
1219 {
1220         LYXERR(Debug::ACTION, "BufferView::dispatch: cmd: " << cmd);
1221
1222         string const argument = to_utf8(cmd.argument());
1223         Cursor & cur = d->cursor_;
1224         Cursor old = cur;
1225
1226         // Don't dispatch function that does not apply to internal buffers.
1227         if (buffer_.isInternal()
1228             && lyxaction.funcHasFlag(cmd.action(), LyXAction::NoInternal))
1229                 return;
1230
1231         // We'll set this back to false if need be.
1232         bool dispatched = true;
1233         buffer_.undo().beginUndoGroup();
1234
1235         FuncCode const act = cmd.action();
1236         switch (act) {
1237
1238         case LFUN_BUFFER_PARAMS_APPLY: {
1239                 DocumentClassConstPtr olddc = buffer_.params().documentClassPtr();
1240                 cur.recordUndoBufferParams();
1241                 istringstream ss(to_utf8(cmd.argument()));
1242                 Lexer lex;
1243                 lex.setStream(ss);
1244                 int const unknown_tokens = buffer_.readHeader(lex);
1245                 if (unknown_tokens != 0) {
1246                         LYXERR0("Warning in LFUN_BUFFER_PARAMS_APPLY!\n"
1247                                                 << unknown_tokens << " unknown token"
1248                                                 << (unknown_tokens == 1 ? "" : "s"));
1249                 }
1250                 updateDocumentClass(olddc);
1251
1252                 // We are most certainly here because of a change in the document
1253                 // It is then better to make sure that all dialogs are in sync with
1254                 // current document settings.
1255                 dr.screenUpdate(Update::Force | Update::FitCursor);
1256                 dr.forceBufferUpdate();
1257                 break;
1258         }
1259
1260         case LFUN_LAYOUT_MODULES_CLEAR: {
1261                 // FIXME: this modifies the document in cap::switchBetweenClasses
1262                 //  without calling recordUndo. Fix this before using
1263                 //  recordUndoBufferParams().
1264                 cur.recordUndoFullBuffer();
1265                 buffer_.params().clearLayoutModules();
1266                 makeDocumentClass();
1267                 dr.screenUpdate(Update::Force);
1268                 dr.forceBufferUpdate();
1269                 break;
1270         }
1271
1272         case LFUN_LAYOUT_MODULE_ADD: {
1273                 BufferParams const & params = buffer_.params();
1274                 if (!params.layoutModuleCanBeAdded(argument)) {
1275                         LYXERR0("Module `" << argument <<
1276                                 "' cannot be added due to failed requirements or "
1277                                 "conflicts with installed modules.");
1278                         break;
1279                 }
1280                 // FIXME: this modifies the document in cap::switchBetweenClasses
1281                 //  without calling recordUndo. Fix this before using
1282                 //  recordUndoBufferParams().
1283                 cur.recordUndoFullBuffer();
1284                 buffer_.params().addLayoutModule(argument);
1285                 makeDocumentClass();
1286                 dr.screenUpdate(Update::Force);
1287                 dr.forceBufferUpdate();
1288                 break;
1289         }
1290
1291         case LFUN_TEXTCLASS_APPLY: {
1292                 // since this shortcircuits, the second call is made only if
1293                 // the first fails
1294                 bool const success =
1295                         LayoutFileList::get().load(argument, buffer_.temppath()) ||
1296                         LayoutFileList::get().load(argument, buffer_.filePath());
1297                 if (!success) {
1298                         docstring s = bformat(_("The document class `%1$s' "
1299                                                  "could not be loaded."), from_utf8(argument));
1300                         frontend::Alert::error(_("Could not load class"), s);
1301                         break;
1302                 }
1303
1304                 LayoutFile const * old_layout = buffer_.params().baseClass();
1305                 LayoutFile const * new_layout = &(LayoutFileList::get()[argument]);
1306
1307                 if (old_layout == new_layout)
1308                         // nothing to do
1309                         break;
1310
1311                 // Save the old, possibly modular, layout for use in conversion.
1312                 // FIXME: this modifies the document in cap::switchBetweenClasses
1313                 //  without calling recordUndo. Fix this before using
1314                 //  recordUndoBufferParams().
1315                 cur.recordUndoFullBuffer();
1316                 buffer_.params().setBaseClass(argument);
1317                 makeDocumentClass();
1318                 dr.screenUpdate(Update::Force);
1319                 dr.forceBufferUpdate();
1320                 break;
1321         }
1322
1323         case LFUN_TEXTCLASS_LOAD: {
1324                 // since this shortcircuits, the second call is made only if
1325                 // the first fails
1326                 bool const success =
1327                         LayoutFileList::get().load(argument, buffer_.temppath()) ||
1328                         LayoutFileList::get().load(argument, buffer_.filePath());
1329                 if (!success) {
1330                         docstring s = bformat(_("The document class `%1$s' "
1331                                                  "could not be loaded."), from_utf8(argument));
1332                         frontend::Alert::error(_("Could not load class"), s);
1333                 }
1334                 break;
1335         }
1336
1337         case LFUN_LAYOUT_RELOAD: {
1338                 LayoutFileIndex bc = buffer_.params().baseClassID();
1339                 LayoutFileList::get().reset(bc);
1340                 buffer_.params().setBaseClass(bc);
1341                 makeDocumentClass();
1342                 dr.screenUpdate(Update::Force);
1343                 dr.forceBufferUpdate();
1344                 break;
1345         }
1346
1347         case LFUN_UNDO:
1348                 dr.setMessage(_("Undo"));
1349                 cur.clearSelection();
1350                 if (!cur.textUndo())
1351                         dr.setMessage(_("No further undo information"));
1352                 else
1353                         dr.screenUpdate(Update::Force | Update::FitCursor);
1354                 dr.forceBufferUpdate();
1355                 break;
1356
1357         case LFUN_REDO:
1358                 dr.setMessage(_("Redo"));
1359                 cur.clearSelection();
1360                 if (!cur.textRedo())
1361                         dr.setMessage(_("No further redo information"));
1362                 else
1363                         dr.screenUpdate(Update::Force | Update::FitCursor);
1364                 dr.forceBufferUpdate();
1365                 break;
1366
1367         case LFUN_FONT_STATE:
1368                 dr.setMessage(cur.currentState());
1369                 break;
1370
1371         case LFUN_BOOKMARK_SAVE:
1372                 saveBookmark(convert<unsigned int>(to_utf8(cmd.argument())));
1373                 break;
1374
1375         case LFUN_LABEL_GOTO: {
1376                 docstring label = cmd.argument();
1377                 if (label.empty()) {
1378                         InsetRef * inset =
1379                                 getInsetByCode<InsetRef>(cur, REF_CODE);
1380                         if (inset) {
1381                                 label = inset->getParam("reference");
1382                                 // persistent=false: use temp_bookmark
1383                                 saveBookmark(0);
1384                         }
1385                 }
1386                 if (!label.empty()) {
1387                         gotoLabel(label);
1388                         // at the moment, this is redundant, since gotoLabel will
1389                         // eventually call LFUN_PARAGRAPH_GOTO, but it seems best
1390                         // to have it here.
1391                         dr.screenUpdate(Update::Force | Update::FitCursor);
1392                 }
1393                 break;
1394         }
1395
1396         case LFUN_PARAGRAPH_GOTO: {
1397                 int const id = convert<int>(cmd.getArg(0));
1398                 int const pos = convert<int>(cmd.getArg(1));
1399                 int i = 0;
1400                 for (Buffer * b = &buffer_; i == 0 || b != &buffer_;
1401                         b = theBufferList().next(b)) {
1402
1403                         Cursor cur(*this);
1404                         cur.setCursor(b->getParFromID(id));
1405                         if (cur.atEnd()) {
1406                                 LYXERR(Debug::INFO, "No matching paragraph found! [" << id << "].");
1407                                 ++i;
1408                                 continue;
1409                         }
1410                         LYXERR(Debug::INFO, "Paragraph " << cur.paragraph().id()
1411                                 << " found in buffer `"
1412                                 << b->absFileName() << "'.");
1413
1414                         if (b == &buffer_) {
1415                                 // Set the cursor
1416                                 cur.pos() = pos;
1417                                 mouseSetCursor(cur);
1418                                 dr.screenUpdate(Update::Force | Update::FitCursor);
1419                         } else {
1420                                 // Switch to other buffer view and resend cmd
1421                                 lyx::dispatch(FuncRequest(
1422                                         LFUN_BUFFER_SWITCH, b->absFileName()));
1423                                 lyx::dispatch(cmd);
1424                         }
1425                         break;
1426                 }
1427                 break;
1428         }
1429
1430         case LFUN_NOTE_NEXT:
1431                 gotoInset(this, NOTE_CODE, false);
1432                 break;
1433
1434         case LFUN_REFERENCE_NEXT: {
1435                 vector<InsetCode> tmp;
1436                 tmp.push_back(LABEL_CODE);
1437                 tmp.push_back(REF_CODE);
1438                 gotoInset(this, tmp, true);
1439                 break;
1440         }
1441
1442         case LFUN_CHANGE_NEXT:
1443                 findNextChange(this);
1444                 // FIXME: Move this LFUN to Buffer so that we don't have to do this:
1445                 dr.screenUpdate(Update::Force | Update::FitCursor);
1446                 break;
1447
1448         case LFUN_CHANGE_PREVIOUS:
1449                 findPreviousChange(this);
1450                 // FIXME: Move this LFUN to Buffer so that we don't have to do this:
1451                 dr.screenUpdate(Update::Force | Update::FitCursor);
1452                 break;
1453
1454         case LFUN_CHANGES_MERGE:
1455                 if (findNextChange(this) || findPreviousChange(this)) {
1456                         dr.screenUpdate(Update::Force | Update::FitCursor);
1457                         dr.forceBufferUpdate();
1458                         showDialog("changes");
1459                 }
1460                 break;
1461
1462         case LFUN_ALL_CHANGES_ACCEPT:
1463                 // select complete document
1464                 cur.reset();
1465                 cur.selHandle(true);
1466                 buffer_.text().cursorBottom(cur);
1467                 // accept everything in a single step to support atomic undo
1468                 buffer_.text().acceptOrRejectChanges(cur, Text::ACCEPT);
1469                 cur.resetAnchor();
1470                 // FIXME: Move this LFUN to Buffer so that we don't have to do this:
1471                 dr.screenUpdate(Update::Force | Update::FitCursor);
1472                 dr.forceBufferUpdate();
1473                 break;
1474
1475         case LFUN_ALL_CHANGES_REJECT:
1476                 // select complete document
1477                 cur.reset();
1478                 cur.selHandle(true);
1479                 buffer_.text().cursorBottom(cur);
1480                 // reject everything in a single step to support atomic undo
1481                 // Note: reject does not work recursively; the user may have to repeat the operation
1482                 buffer_.text().acceptOrRejectChanges(cur, Text::REJECT);
1483                 cur.resetAnchor();
1484                 // FIXME: Move this LFUN to Buffer so that we don't have to do this:
1485                 dr.screenUpdate(Update::Force | Update::FitCursor);
1486                 dr.forceBufferUpdate();
1487                 break;
1488
1489         case LFUN_WORD_FIND_FORWARD:
1490         case LFUN_WORD_FIND_BACKWARD: {
1491                 // FIXME THREAD
1492                 // Would it maybe be better if this variable were view specific anyway?
1493                 static docstring last_search;
1494                 docstring searched_string;
1495
1496                 if (!cmd.argument().empty()) {
1497                         last_search = cmd.argument();
1498                         searched_string = cmd.argument();
1499                 } else {
1500                         searched_string = last_search;
1501                 }
1502
1503                 if (searched_string.empty())
1504                         break;
1505
1506                 bool const fw = act == LFUN_WORD_FIND_FORWARD;
1507                 docstring const data =
1508                         find2string(searched_string, true, false, fw);
1509                 bool found = lyxfind(this, FuncRequest(LFUN_WORD_FIND, data));
1510                 if (found) {
1511                         dr.screenUpdate(Update::Force | Update::FitCursor);
1512                         cur.dispatched();
1513                         dispatched = true;
1514                 } else {
1515                         cur.undispatched();
1516                         dispatched = false;
1517                 }
1518                 break;
1519         }
1520
1521         case LFUN_WORD_FIND: {
1522                 FuncRequest req = cmd;
1523                 if (cmd.argument().empty() && !d->search_request_cache_.argument().empty())
1524                         req = d->search_request_cache_;
1525                 if (req.argument().empty()) {
1526                         lyx::dispatch(FuncRequest(LFUN_DIALOG_SHOW, "findreplace"));
1527                         break;
1528                 }
1529                 if (lyxfind(this, req)) {
1530                         dr.screenUpdate(Update::Force | Update::FitCursor);
1531                         cur.dispatched();
1532                         dispatched = true;
1533                 } else {
1534                         cur.undispatched();
1535                         dispatched = false;
1536                 }
1537                 d->search_request_cache_ = req;
1538                 break;
1539         }
1540
1541         case LFUN_WORD_REPLACE: {
1542                 bool has_deleted = false;
1543                 if (cur.selection()) {
1544                         DocIterator beg = cur.selectionBegin();
1545                         DocIterator end = cur.selectionEnd();
1546                         if (beg.pit() == end.pit()) {
1547                                 for (pos_type p = beg.pos() ; p < end.pos() ; ++p) {
1548                                         if (!cur.inMathed() && cur.paragraph().isDeleted(p)) {
1549                                                 has_deleted = true;
1550                                                 break;
1551                                         }
1552                                 }
1553                         }
1554                 }
1555                 if (lyxreplace(this, cmd, has_deleted)) {
1556                         dr.forceBufferUpdate();
1557                         dr.screenUpdate(Update::Force | Update::FitCursor);
1558                         cur.dispatched();
1559                         dispatched = true;
1560                 } else {
1561                         cur.undispatched();
1562                         dispatched = false;
1563                 }
1564                 break;
1565         }
1566
1567         case LFUN_WORD_FINDADV: {
1568                 FindAndReplaceOptions opt;
1569                 istringstream iss(to_utf8(cmd.argument()));
1570                 iss >> opt;
1571                 if (findAdv(this, opt)) {
1572                         dr.screenUpdate(Update::Force | Update::FitCursor);
1573                         cur.dispatched();
1574                         dispatched = true;
1575                 } else {
1576                         cur.undispatched();
1577                         dispatched = false;
1578                 }
1579                 break;
1580         }
1581
1582         case LFUN_MARK_OFF:
1583                 cur.clearSelection();
1584                 dr.setMessage(from_utf8(N_("Mark off")));
1585                 break;
1586
1587         case LFUN_MARK_ON:
1588                 cur.clearSelection();
1589                 cur.setMark(true);
1590                 dr.setMessage(from_utf8(N_("Mark on")));
1591                 break;
1592
1593         case LFUN_MARK_TOGGLE:
1594                 cur.setSelection(false);
1595                 if (cur.mark()) {
1596                         cur.setMark(false);
1597                         dr.setMessage(from_utf8(N_("Mark removed")));
1598                 } else {
1599                         cur.setMark(true);
1600                         dr.setMessage(from_utf8(N_("Mark set")));
1601                 }
1602                 cur.resetAnchor();
1603                 break;
1604
1605         case LFUN_SCREEN_SHOW_CURSOR:
1606                 showCursor();
1607                 break;
1608
1609         case LFUN_SCREEN_RECENTER:
1610                 recenter();
1611                 break;
1612
1613         case LFUN_BIBTEX_DATABASE_ADD: {
1614                 Cursor tmpcur = cur;
1615                 findInset(tmpcur, BIBTEX_CODE, false);
1616                 InsetBibtex * inset = getInsetByCode<InsetBibtex>(tmpcur,
1617                                                 BIBTEX_CODE);
1618                 if (inset) {
1619                         if (inset->addDatabase(cmd.argument())) {
1620                                 buffer_.invalidateBibfileCache();
1621                                 dr.forceBufferUpdate();
1622                         }
1623                 }
1624                 break;
1625         }
1626
1627         case LFUN_BIBTEX_DATABASE_DEL: {
1628                 Cursor tmpcur = cur;
1629                 findInset(tmpcur, BIBTEX_CODE, false);
1630                 InsetBibtex * inset = getInsetByCode<InsetBibtex>(tmpcur,
1631                                                 BIBTEX_CODE);
1632                 if (inset) {
1633                         if (inset->delDatabase(cmd.argument())) {
1634                                 buffer_.invalidateBibfileCache();
1635                                 dr.forceBufferUpdate();
1636                         }
1637                 }
1638                 break;
1639         }
1640
1641         case LFUN_STATISTICS: {
1642                 DocIterator from, to;
1643                 if (cur.selection()) {
1644                         from = cur.selectionBegin();
1645                         to = cur.selectionEnd();
1646                 } else {
1647                         from = doc_iterator_begin(&buffer_);
1648                         to = doc_iterator_end(&buffer_);
1649                 }
1650                 buffer_.updateStatistics(from, to);
1651                 int const words = buffer_.wordCount();
1652                 int const chars = buffer_.charCount(false);
1653                 int const chars_blanks = buffer_.charCount(true);
1654                 docstring message;
1655                 if (cur.selection())
1656                         message = _("Statistics for the selection:");
1657                 else
1658                         message = _("Statistics for the document:");
1659                 message += "\n\n";
1660                 if (words != 1)
1661                         message += bformat(_("%1$d words"), words);
1662                 else
1663                         message += _("One word");
1664                 message += "\n";
1665                 if (chars_blanks != 1)
1666                         message += bformat(_("%1$d characters (including blanks)"),
1667                                           chars_blanks);
1668                 else
1669                         message += _("One character (including blanks)");
1670                 message += "\n";
1671                 if (chars != 1)
1672                         message += bformat(_("%1$d characters (excluding blanks)"),
1673                                           chars);
1674                 else
1675                         message += _("One character (excluding blanks)");
1676
1677                 Alert::information(_("Statistics"), message);
1678         }
1679                 break;
1680
1681         case LFUN_SCREEN_UP:
1682         case LFUN_SCREEN_DOWN: {
1683                 Point p = getPos(cur);
1684                 // This code has been commented out to enable to scroll down a
1685                 // document, even if there are large insets in it (see bug #5465).
1686                 /*if (p.y_ < 0 || p.y_ > height_) {
1687                         // The cursor is off-screen so recenter before proceeding.
1688                         showCursor();
1689                         p = getPos(cur);
1690                 }*/
1691                 int const scrolled = scroll(act == LFUN_SCREEN_UP
1692                         ? -height_ : height_);
1693                 if (act == LFUN_SCREEN_UP && scrolled > -height_)
1694                         p = Point(0, 0);
1695                 if (act == LFUN_SCREEN_DOWN && scrolled < height_)
1696                         p = Point(width_, height_);
1697                 bool const in_texted = cur.inTexted();
1698                 cur.setCursor(doc_iterator_begin(cur.buffer()));
1699                 cur.selHandle(false);
1700                 buffer_.changed(true);
1701                 updateHoveredInset();
1702
1703                 d->text_metrics_[&buffer_.text()].editXY(cur, p.x_, p.y_,
1704                         true, act == LFUN_SCREEN_UP);
1705                 //FIXME: what to do with cur.x_target()?
1706                 bool update = in_texted && cur.bv().checkDepm(cur, old);
1707                 cur.finishUndo();
1708
1709                 if (update || cur.mark())
1710                         dr.screenUpdate(Update::Force | Update::FitCursor);
1711                 if (update)
1712                         dr.forceBufferUpdate();
1713                 break;
1714         }
1715
1716         case LFUN_SCROLL: {
1717                 string const scroll_type = cmd.getArg(0);
1718                 int scroll_step = 0;
1719                 if (scroll_type == "line")
1720                         scroll_step = d->scrollbarParameters_.single_step;
1721                 else if (scroll_type == "page")
1722                         scroll_step = d->scrollbarParameters_.page_step;
1723                 else
1724                         return;
1725                 string const scroll_quantity = cmd.getArg(1);
1726                 if (scroll_quantity == "up")
1727                         scrollUp(scroll_step);
1728                 else if (scroll_quantity == "down")
1729                         scrollDown(scroll_step);
1730                 else {
1731                         int const scroll_value = convert<int>(scroll_quantity);
1732                         if (scroll_value)
1733                                 scroll(scroll_step * scroll_value);
1734                 }
1735                 buffer_.changed(true);
1736                 updateHoveredInset();
1737                 dr.forceBufferUpdate();
1738                 break;
1739         }
1740
1741         case LFUN_SCREEN_UP_SELECT: {
1742                 // FIXME: why is the algorithm different from LFUN_SCREEN_UP?
1743                 cur.selHandle(true);
1744                 if (isTopScreen()) {
1745                         lyx::dispatch(FuncRequest(LFUN_BUFFER_BEGIN_SELECT));
1746                         cur.finishUndo();
1747                         break;
1748                 }
1749                 int y = getPos(cur).y_;
1750                 int const ymin = y - height_ + defaultRowHeight();
1751                 while (y > ymin && cur.up())
1752                         y = getPos(cur).y_;
1753
1754                 cur.finishUndo();
1755                 dr.screenUpdate(Update::SinglePar | Update::FitCursor);
1756                 break;
1757         }
1758
1759         case LFUN_SCREEN_DOWN_SELECT: {
1760                 // FIXME: why is the algorithm different from LFUN_SCREEN_DOWN?
1761                 cur.selHandle(true);
1762                 if (isBottomScreen()) {
1763                         lyx::dispatch(FuncRequest(LFUN_BUFFER_END_SELECT));
1764                         cur.finishUndo();
1765                         break;
1766                 }
1767                 int y = getPos(cur).y_;
1768                 int const ymax = y + height_ - defaultRowHeight();
1769                 while (y < ymax && cur.down())
1770                         y = getPos(cur).y_;
1771
1772                 cur.finishUndo();
1773                 dr.screenUpdate(Update::SinglePar | Update::FitCursor);
1774                 break;
1775         }
1776
1777
1778         case LFUN_INSET_SELECT_ALL: {
1779                 // true if all cells are selected
1780                 bool const all_selected = cur.depth() > 1
1781                     && cur.selBegin().at_begin()
1782                     && cur.selEnd().at_end();
1783                 // true if some cells are selected
1784                 bool const cells_selected = cur.depth() > 1
1785                     && cur.selBegin().at_cell_begin()
1786                         && cur.selEnd().at_cell_end();
1787                 if (all_selected || (cells_selected && !cur.inset().isTable())) {
1788                         // All the contents of the inset if selected, or only at
1789                         // least one cell but inset is not a table.
1790                         // Select the inset from outside.
1791                         cur.pop();
1792                         cur.resetAnchor();
1793                         cur.setSelection(true);
1794                         cur.posForward();
1795                 } else if (cells_selected) {
1796                         // At least one complete cell is selected and inset is a table.
1797                         // Select all cells
1798                         cur.idx() = 0;
1799                         cur.pos() = 0;
1800                         cur.resetAnchor();
1801                         cur.setSelection(true);
1802                         cur.idx() = cur.lastidx();
1803                         cur.pos() = cur.lastpos();
1804                 } else {
1805                         // select current cell
1806                         cur.pit() = 0;
1807                         cur.pos() = 0;
1808                         cur.resetAnchor();
1809                         cur.setSelection(true);
1810                         cur.pit() = cur.lastpit();
1811                         cur.pos() = cur.lastpos();
1812                 }
1813                 cur.setCurrentFont();
1814                 dr.screenUpdate(Update::Force);
1815                 break;
1816         }
1817
1818
1819         // This would be in Buffer class if only Cursor did not
1820         // require a bufferview
1821         case LFUN_INSET_FORALL: {
1822                 docstring const name = from_utf8(cmd.getArg(0));
1823                 string const commandstr = cmd.getLongArg(1);
1824                 FuncRequest const fr = lyxaction.lookupFunc(commandstr);
1825
1826                 // an arbitrary number to limit number of iterations
1827                 const int max_iter = 100000;
1828                 int iterations = 0;
1829                 Cursor & cur = d->cursor_;
1830                 Cursor const savecur = cur;
1831                 cur.reset();
1832                 if (!cur.nextInset())
1833                         cur.forwardInset();
1834                 cur.beginUndoGroup();
1835                 while(cur && iterations < max_iter) {
1836                         Inset * const ins = cur.nextInset();
1837                         if (!ins)
1838                                 break;
1839                         docstring insname = ins->layoutName();
1840                         while (!insname.empty()) {
1841                                 if (insname == name || name == from_utf8("*")) {
1842                                         cur.recordUndo();
1843                                         lyx::dispatch(fr, dr);
1844                                         ++iterations;
1845                                         break;
1846                                 }
1847                                 size_t const i = insname.rfind(':');
1848                                 if (i == string::npos)
1849                                         break;
1850                                 insname = insname.substr(0, i);
1851                         }
1852                         // if we did not delete the inset, skip it
1853                         if (!cur.nextInset() || cur.nextInset() == ins)
1854                                 cur.forwardInset();
1855                 }
1856                 cur = savecur;
1857                 cur.fixIfBroken();
1858                 /** This is a dummy undo record only to remember the cursor
1859                  * that has just been set; this will be used on a redo action
1860                  * (see ticket #10097)
1861
1862                  * FIXME: a better fix would be to have a way to set the
1863                  * cursor value directly, but I am not sure it is worth it.
1864                  */
1865                 cur.recordUndo();
1866                 cur.endUndoGroup();
1867                 dr.screenUpdate(Update::Force);
1868                 dr.forceBufferUpdate();
1869
1870                 if (iterations >= max_iter) {
1871                         dr.setError(true);
1872                         dr.setMessage(bformat(_("`inset-forall' interrupted because number of actions is larger than %1$d"), max_iter));
1873                 } else
1874                         dr.setMessage(bformat(_("Applied \"%1$s\" to %2$d insets"), from_utf8(commandstr), iterations));
1875                 break;
1876         }
1877
1878
1879         case LFUN_BRANCH_ADD_INSERT: {
1880                 docstring branch_name = from_utf8(cmd.getArg(0));
1881                 if (branch_name.empty())
1882                         if (!Alert::askForText(branch_name, _("Branch name")) ||
1883                                                 branch_name.empty())
1884                                 break;
1885
1886                 DispatchResult drtmp;
1887                 buffer_.dispatch(FuncRequest(LFUN_BRANCH_ADD, branch_name), drtmp);
1888                 if (drtmp.error()) {
1889                         Alert::warning(_("Branch already exists"), drtmp.message());
1890                         break;
1891                 }
1892                 BranchList & branch_list = buffer_.params().branchlist();
1893                 vector<docstring> const branches =
1894                         getVectorFromString(branch_name, branch_list.separator());
1895                 for (vector<docstring>::const_iterator it = branches.begin();
1896                      it != branches.end(); ++it) {
1897                         branch_name = *it;
1898                         lyx::dispatch(FuncRequest(LFUN_BRANCH_INSERT, branch_name));
1899                 }
1900                 break;
1901         }
1902
1903         case LFUN_KEYMAP_OFF:
1904                 getIntl().keyMapOn(false);
1905                 break;
1906
1907         case LFUN_KEYMAP_PRIMARY:
1908                 getIntl().keyMapPrim();
1909                 break;
1910
1911         case LFUN_KEYMAP_SECONDARY:
1912                 getIntl().keyMapSec();
1913                 break;
1914
1915         case LFUN_KEYMAP_TOGGLE:
1916                 getIntl().toggleKeyMap();
1917                 break;
1918
1919         case LFUN_DIALOG_SHOW_NEW_INSET: {
1920                 string const name = cmd.getArg(0);
1921                 string data = trim(to_utf8(cmd.argument()).substr(name.size()));
1922                 if (decodeInsetParam(name, data, buffer_))
1923                         lyx::dispatch(FuncRequest(LFUN_DIALOG_SHOW, name + " " + data));
1924                 else
1925                         lyxerr << "Inset type '" << name <<
1926                         "' not recognized in LFUN_DIALOG_SHOW_NEW_INSET" <<  endl;
1927                 break;
1928         }
1929
1930         case LFUN_CITATION_INSERT: {
1931                 if (argument.empty()) {
1932                         lyx::dispatch(FuncRequest(LFUN_DIALOG_SHOW_NEW_INSET, "citation"));
1933                         break;
1934                 }
1935                 // we can have one optional argument, delimited by '|'
1936                 // citation-insert <key>|<text_before>
1937                 // this should be enhanced to also support text_after
1938                 // and citation style
1939                 string arg = argument;
1940                 string opt1;
1941                 if (contains(argument, "|")) {
1942                         arg = token(argument, '|', 0);
1943                         opt1 = token(argument, '|', 1);
1944                 }
1945
1946                 // if our cursor is directly in front of or behind a citation inset,
1947                 // we will instead add the new key to it.
1948                 Inset * inset = cur.nextInset();
1949                 if (!inset || inset->lyxCode() != CITE_CODE)
1950                         inset = cur.prevInset();
1951                 if (inset && inset->lyxCode() == CITE_CODE) {
1952                         InsetCitation * icite = static_cast<InsetCitation *>(inset);
1953                         if (icite->addKey(arg)) {
1954                                 dr.forceBufferUpdate();
1955                                 dr.screenUpdate(Update::FitCursor | Update::SinglePar);
1956                                 if (!opt1.empty())
1957                                         LYXERR0("Discarding optional argument to citation-insert.");
1958                         }
1959                         dispatched = true;
1960                         break;
1961                 }
1962                 InsetCommandParams icp(CITE_CODE);
1963                 icp["key"] = from_utf8(arg);
1964                 if (!opt1.empty())
1965                         icp["before"] = from_utf8(opt1);
1966                 string icstr = InsetCommand::params2string(icp);
1967                 FuncRequest fr(LFUN_INSET_INSERT, icstr);
1968                 lyx::dispatch(fr);
1969                 break;
1970         }
1971
1972         case LFUN_INSET_APPLY: {
1973                 string const name = cmd.getArg(0);
1974                 Inset * inset = editedInset(name);
1975                 if (!inset) {
1976                         FuncRequest fr(LFUN_INSET_INSERT, cmd.argument());
1977                         lyx::dispatch(fr);
1978                         break;
1979                 }
1980                 // put cursor in front of inset.
1981                 if (!setCursorFromInset(inset)) {
1982                         LASSERT(false, break);
1983                 }
1984                 cur.recordUndo();
1985                 FuncRequest fr(LFUN_INSET_MODIFY, cmd.argument());
1986                 inset->dispatch(cur, fr);
1987                 dr.screenUpdate(cur.result().screenUpdate());
1988                 if (cur.result().needBufferUpdate())
1989                         dr.forceBufferUpdate();
1990                 break;
1991         }
1992
1993         // FIXME:
1994         // The change of language of buffer belongs to the Buffer class.
1995         // We have to do it here because we need a cursor for Undo.
1996         // When Undo::recordUndoBufferParams() is implemented someday
1997         // LFUN_BUFFER_LANGUAGE should be handled by the Buffer class.
1998         case LFUN_BUFFER_LANGUAGE: {
1999                 Language const * oldL = buffer_.params().language;
2000                 Language const * newL = languages.getLanguage(argument);
2001                 if (!newL || oldL == newL)
2002                         break;
2003                 if (oldL->rightToLeft() == newL->rightToLeft()) {
2004                         cur.recordUndoFullBuffer();
2005                         buffer_.changeLanguage(oldL, newL);
2006                         cur.setCurrentFont();
2007                         dr.forceBufferUpdate();
2008                 }
2009                 break;
2010         }
2011
2012         case LFUN_FILE_INSERT_PLAINTEXT_PARA:
2013         case LFUN_FILE_INSERT_PLAINTEXT: {
2014                 bool const as_paragraph = (act == LFUN_FILE_INSERT_PLAINTEXT_PARA);
2015                 string const fname = to_utf8(cmd.argument());
2016                 if (!FileName::isAbsolute(fname))
2017                         dr.setMessage(_("Absolute filename expected."));
2018                 else
2019                         insertPlaintextFile(FileName(fname), as_paragraph);
2020                 break;
2021         }
2022
2023         default:
2024                 // OK, so try the Buffer itself...
2025                 buffer_.dispatch(cmd, dr);
2026                 dispatched = dr.dispatched();
2027                 break;
2028         }
2029
2030         buffer_.undo().endUndoGroup();
2031         dr.dispatched(dispatched);
2032
2033         // NOTE: The code below is copied from Cursor::dispatch. If you
2034         // need to modify this, please update the other one too.
2035
2036         // notify insets we just entered/left
2037         if (cursor() != old) {
2038                 old.beginUndoGroup();
2039                 old.fixIfBroken();
2040                 bool badcursor = notifyCursorLeavesOrEnters(old, cursor());
2041                 if (badcursor) {
2042                         cursor().fixIfBroken();
2043                         resetInlineCompletionPos();
2044                 }
2045                 old.endUndoGroup();
2046         }
2047 }
2048
2049
2050 docstring const BufferView::requestSelection()
2051 {
2052         Cursor & cur = d->cursor_;
2053
2054         LYXERR(Debug::SELECTION, "requestSelection: cur.selection: " << cur.selection());
2055         if (!cur.selection()) {
2056                 d->xsel_cache_.set = false;
2057                 return docstring();
2058         }
2059
2060         LYXERR(Debug::SELECTION, "requestSelection: xsel_cache.set: " << d->xsel_cache_.set);
2061         if (!d->xsel_cache_.set ||
2062             cur.top() != d->xsel_cache_.cursor ||
2063             cur.realAnchor().top() != d->xsel_cache_.anchor)
2064         {
2065                 d->xsel_cache_.cursor = cur.top();
2066                 d->xsel_cache_.anchor = cur.realAnchor().top();
2067                 d->xsel_cache_.set = cur.selection();
2068                 return cur.selectionAsString(false);
2069         }
2070         return docstring();
2071 }
2072
2073
2074 void BufferView::clearSelection()
2075 {
2076         d->cursor_.clearSelection();
2077         // Clear the selection buffer. Otherwise a subsequent
2078         // middle-mouse-button paste would use the selection buffer,
2079         // not the more current external selection.
2080         cap::clearSelection();
2081         d->xsel_cache_.set = false;
2082         // The buffer did not really change, but this causes the
2083         // redraw we need because we cleared the selection above.
2084         buffer_.changed(false);
2085 }
2086
2087
2088 void BufferView::resize(int width, int height)
2089 {
2090         // Update from work area
2091         width_ = width;
2092         height_ = height;
2093
2094         // Clear the paragraph height cache.
2095         d->par_height_.clear();
2096         // Redo the metrics.
2097         updateMetrics();
2098 }
2099
2100
2101 Inset const * BufferView::getCoveringInset(Text const & text,
2102                 int x, int y) const
2103 {
2104         TextMetrics & tm = d->text_metrics_[&text];
2105         Inset * inset = tm.checkInsetHit(x, y);
2106         if (!inset)
2107                 return 0;
2108
2109         if (!inset->descendable(*this))
2110                 // No need to go further down if the inset is not
2111                 // descendable.
2112                 return inset;
2113
2114         size_t cell_number = inset->nargs();
2115         // Check all the inner cell.
2116         for (size_t i = 0; i != cell_number; ++i) {
2117                 Text const * inner_text = inset->getText(i);
2118                 if (inner_text) {
2119                         // Try deeper.
2120                         Inset const * inset_deeper =
2121                                 getCoveringInset(*inner_text, x, y);
2122                         if (inset_deeper)
2123                                 return inset_deeper;
2124                 }
2125         }
2126
2127         return inset;
2128 }
2129
2130
2131 void BufferView::updateHoveredInset() const
2132 {
2133         // Get inset under mouse, if there is one.
2134         int const x = d->mouse_position_cache_.x_;
2135         int const y = d->mouse_position_cache_.y_;
2136         Inset const * covering_inset = getCoveringInset(buffer_.text(), x, y);
2137
2138         d->clickable_inset_ = covering_inset && covering_inset->clickable(*this, x, y);
2139
2140         if (covering_inset == d->last_inset_)
2141                 // Same inset, no need to do anything...
2142                 return;
2143
2144         bool need_redraw = false;
2145         if (d->last_inset_) {
2146                 // Remove the hint on the last hovered inset (if any).
2147                 need_redraw |= d->last_inset_->setMouseHover(this, false);
2148                 d->last_inset_ = 0;
2149         }
2150
2151         if (covering_inset && covering_inset->setMouseHover(this, true)) {
2152                 need_redraw = true;
2153                 // Only the insets that accept the hover state, do
2154                 // clear the last_inset_, so only set the last_inset_
2155                 // member if the hovered setting is accepted.
2156                 d->last_inset_ = covering_inset;
2157         }
2158
2159         if (need_redraw) {
2160                 LYXERR(Debug::PAINTING, "Mouse hover detected at: ("
2161                                 << d->mouse_position_cache_.x_ << ", "
2162                                 << d->mouse_position_cache_.y_ << ")");
2163
2164                 d->update_strategy_ = DecorationUpdate;
2165
2166                 // This event (moving without mouse click) is not passed further.
2167                 // This should be changed if it is further utilized.
2168                 buffer_.changed(false);
2169         }
2170 }
2171
2172
2173 void BufferView::clearLastInset(Inset * inset) const
2174 {
2175         if (d->last_inset_ != inset) {
2176                 LYXERR0("Wrong last_inset!");
2177                 LATTEST(false);
2178         }
2179         d->last_inset_ = 0;
2180 }
2181
2182
2183 void BufferView::mouseEventDispatch(FuncRequest const & cmd0)
2184 {
2185         //lyxerr << "[ cmd0 " << cmd0 << "]" << endl;
2186
2187         // This is only called for mouse related events including
2188         // LFUN_FILE_OPEN generated by drag-and-drop.
2189         FuncRequest cmd = cmd0;
2190
2191         Cursor old = cursor();
2192         Cursor cur(*this);
2193         cur.push(buffer_.inset());
2194         cur.setSelection(d->cursor_.selection());
2195
2196         // Either the inset under the cursor or the
2197         // surrounding Text will handle this event.
2198
2199         // make sure we stay within the screen...
2200         cmd.set_y(min(max(cmd.y(), -1), height_));
2201
2202         d->mouse_position_cache_.x_ = cmd.x();
2203         d->mouse_position_cache_.y_ = cmd.y();
2204
2205         if (cmd.action() == LFUN_MOUSE_MOTION && cmd.button() == mouse_button::none) {
2206                 updateHoveredInset();
2207                 return;
2208         }
2209
2210         // Build temporary cursor.
2211         Inset * inset = d->text_metrics_[&buffer_.text()].editXY(cur, cmd.x(), cmd.y());
2212         if (inset) {
2213                 // If inset is not editable, cur.pos() might point behind the
2214                 // inset (depending on cmd.x(), cmd.y()). This is needed for
2215                 // editing to fix bug 9628, but e.g. the context menu needs a
2216                 // cursor in front of the inset.
2217                 if ((inset->hasSettings() || !inset->contextMenuName().empty()
2218                      || inset->lyxCode() == SEPARATOR_CODE) &&
2219                     cur.nextInset() != inset && cur.prevInset() == inset)
2220                         cur.posBackward();
2221         } else if (cur.inTexted() && cur.pos()
2222                         && cur.paragraph().isEnvSeparator(cur.pos() - 1)) {
2223                 // Always place cursor in front of a separator inset.
2224                 cur.posBackward();
2225         }
2226
2227         // Put anchor at the same position.
2228         cur.resetAnchor();
2229
2230         cur.beginUndoGroup();
2231
2232         // Try to dispatch to an non-editable inset near this position
2233         // via the temp cursor. If the inset wishes to change the real
2234         // cursor it has to do so explicitly by using
2235         //  cur.bv().cursor() = cur;  (or similar)
2236         if (inset)
2237                 inset->dispatch(cur, cmd);
2238
2239         // Now dispatch to the temporary cursor. If the real cursor should
2240         // be modified, the inset's dispatch has to do so explicitly.
2241         if (!inset || !cur.result().dispatched())
2242                 cur.dispatch(cmd);
2243
2244         // Notify left insets
2245         if (cur != old) {
2246                 bool badcursor = old.fixIfBroken() | cur.fixIfBroken();
2247                 badcursor |= notifyCursorLeavesOrEnters(old, cur);
2248                 if (badcursor)
2249                         cursor().fixIfBroken();
2250         }
2251
2252         cur.endUndoGroup();
2253
2254         // Do we have a selection?
2255         theSelection().haveSelection(cursor().selection());
2256
2257         if (cur.needBufferUpdate()) {
2258                 cur.clearBufferUpdate();
2259                 buffer().updateBuffer();
2260         }
2261
2262         // If the command has been dispatched,
2263         if (cur.result().dispatched() || cur.result().screenUpdate())
2264                 processUpdateFlags(cur.result().screenUpdate());
2265 }
2266
2267
2268 int BufferView::minVisiblePart()
2269 {
2270         return 2 * defaultRowHeight();
2271 }
2272
2273
2274 int BufferView::scroll(int y)
2275 {
2276         if (y > 0)
2277                 return scrollDown(y);
2278         if (y < 0)
2279                 return scrollUp(-y);
2280         return 0;
2281 }
2282
2283
2284 int BufferView::scrollDown(int offset)
2285 {
2286         Text * text = &buffer_.text();
2287         TextMetrics & tm = d->text_metrics_[text];
2288         int const ymax = height_ + offset;
2289         while (true) {
2290                 pair<pit_type, ParagraphMetrics const *> last = tm.last();
2291                 int bottom_pos = last.second->position() + last.second->descent();
2292                 if (lyxrc.scroll_below_document)
2293                         bottom_pos += height_ - minVisiblePart();
2294                 if (last.first + 1 == int(text->paragraphs().size())) {
2295                         if (bottom_pos <= height_)
2296                                 return 0;
2297                         offset = min(offset, bottom_pos - height_);
2298                         break;
2299                 }
2300                 if (bottom_pos > ymax)
2301                         break;
2302                 tm.newParMetricsDown();
2303         }
2304         d->anchor_ypos_ -= offset;
2305         return -offset;
2306 }
2307
2308
2309 int BufferView::scrollUp(int offset)
2310 {
2311         Text * text = &buffer_.text();
2312         TextMetrics & tm = d->text_metrics_[text];
2313         int ymin = - offset;
2314         while (true) {
2315                 pair<pit_type, ParagraphMetrics const *> first = tm.first();
2316                 int top_pos = first.second->position() - first.second->ascent();
2317                 if (first.first == 0) {
2318                         if (top_pos >= 0)
2319                                 return 0;
2320                         offset = min(offset, - top_pos);
2321                         break;
2322                 }
2323                 if (top_pos < ymin)
2324                         break;
2325                 tm.newParMetricsUp();
2326         }
2327         d->anchor_ypos_ += offset;
2328         return offset;
2329 }
2330
2331
2332 void BufferView::setCursorFromRow(int row)
2333 {
2334         setCursorFromRow(row, buffer_.texrow());
2335 }
2336
2337
2338 void BufferView::setCursorFromRow(int row, TexRow const & texrow)
2339 {
2340         int tmpid;
2341         int tmppos;
2342         pit_type newpit = 0;
2343         pos_type newpos = 0;
2344
2345         texrow.getIdFromRow(row, tmpid, tmppos);
2346
2347         bool posvalid = (tmpid != -1);
2348         if (posvalid) {
2349                 // we need to make sure that the row and position
2350                 // we got back are valid, because the buffer may well
2351                 // have changed since we last generated the LaTeX.
2352                 DocIterator dit = buffer_.getParFromID(tmpid);
2353                 if (dit == doc_iterator_end(&buffer_))
2354                         posvalid = false;
2355                 else if (dit.depth() > 1) {
2356                         // We are in an inset.
2357                         pos_type lastpos = dit.lastpos();
2358                         dit.pos() = tmppos > lastpos ? lastpos : tmppos;
2359                         setCursor(dit);
2360                         recenter();
2361                         return;
2362                 } else {
2363                         newpit = dit.pit();
2364                         // now have to check pos.
2365                         newpos = tmppos;
2366                         Paragraph const & par = buffer_.text().getPar(newpit);
2367                         if (newpos > par.size()) {
2368                                 LYXERR0("Requested position no longer valid.");
2369                                 newpos = par.size() - 1;
2370                         }
2371                 }
2372         }
2373         if (!posvalid) {
2374                 frontend::Alert::error(_("Inverse Search Failed"),
2375                         _("Invalid position requested by inverse search.\n"
2376                     "You need to update the viewed document."));
2377                 return;
2378         }
2379         d->cursor_.reset();
2380         buffer_.text().setCursor(d->cursor_, newpit, newpos);
2381         d->cursor_.setSelection(false);
2382         d->cursor_.resetAnchor();
2383         recenter();
2384 }
2385
2386
2387 bool BufferView::setCursorFromInset(Inset const * inset)
2388 {
2389         // are we already there?
2390         if (cursor().nextInset() == inset)
2391                 return true;
2392
2393         // Inset is not at cursor position. Find it in the document.
2394         Cursor cur(*this);
2395         cur.reset();
2396         while (cur && cur.nextInset() != inset)
2397                 cur.forwardInset();
2398
2399         if (cur) {
2400                 setCursor(cur);
2401                 return true;
2402         }
2403         return false;
2404 }
2405
2406
2407 void BufferView::gotoLabel(docstring const & label)
2408 {
2409         ListOfBuffers bufs = buffer().allRelatives();
2410         ListOfBuffers::iterator it = bufs.begin();
2411         for (; it != bufs.end(); ++it) {
2412                 Buffer const * buf = *it;
2413
2414                 // find label
2415                 shared_ptr<Toc> toc = buf->tocBackend().toc("label");
2416                 Toc::const_iterator toc_it = toc->begin();
2417                 Toc::const_iterator end = toc->end();
2418                 for (; toc_it != end; ++toc_it) {
2419                         if (label == toc_it->str()) {
2420                                 lyx::dispatch(toc_it->action());
2421                                 return;
2422                         }
2423                 }
2424         }
2425 }
2426
2427
2428 TextMetrics const & BufferView::textMetrics(Text const * t) const
2429 {
2430         return const_cast<BufferView *>(this)->textMetrics(t);
2431 }
2432
2433
2434 TextMetrics & BufferView::textMetrics(Text const * t)
2435 {
2436         LBUFERR(t);
2437         TextMetricsCache::iterator tmc_it  = d->text_metrics_.find(t);
2438         if (tmc_it == d->text_metrics_.end()) {
2439                 tmc_it = d->text_metrics_.insert(
2440                         make_pair(t, TextMetrics(this, const_cast<Text *>(t)))).first;
2441         }
2442         return tmc_it->second;
2443 }
2444
2445
2446 ParagraphMetrics const & BufferView::parMetrics(Text const * t,
2447                 pit_type pit) const
2448 {
2449         return textMetrics(t).parMetrics(pit);
2450 }
2451
2452
2453 int BufferView::workHeight() const
2454 {
2455         return height_;
2456 }
2457
2458
2459 void BufferView::setCursor(DocIterator const & dit)
2460 {
2461         d->cursor_.reset();
2462         size_t const n = dit.depth();
2463         for (size_t i = 0; i < n; ++i)
2464                 dit[i].inset().edit(d->cursor_, true);
2465
2466         d->cursor_.setCursor(dit);
2467         d->cursor_.setSelection(false);
2468         d->cursor_.setCurrentFont();
2469         // FIXME
2470         // It seems on general grounds as if this is probably needed, but
2471         // it is not yet clear.
2472         // See bug #7394 and r38388.
2473         // d->cursor.resetAnchor();
2474 }
2475
2476
2477 bool BufferView::checkDepm(Cursor & cur, Cursor & old)
2478 {
2479         // Would be wrong to delete anything if we have a selection.
2480         if (cur.selection())
2481                 return false;
2482
2483         bool need_anchor_change = false;
2484         bool changed = d->cursor_.text()->deleteEmptyParagraphMechanism(cur, old,
2485                 need_anchor_change);
2486
2487         if (need_anchor_change)
2488                 cur.resetAnchor();
2489
2490         if (!changed)
2491                 return false;
2492
2493         d->cursor_ = cur;
2494
2495         // we would rather not do this here, but it needs to be done before
2496         // the changed() signal is sent.
2497         buffer_.updateBuffer();
2498
2499         buffer_.changed(true);
2500         return true;
2501 }
2502
2503
2504 bool BufferView::mouseSetCursor(Cursor & cur, bool select)
2505 {
2506         LASSERT(&cur.bv() == this, return false);
2507
2508         if (!select)
2509                 // this event will clear selection so we save selection for
2510                 // persistent selection
2511                 cap::saveSelection(cursor());
2512
2513         d->cursor_.macroModeClose();
2514         // If a macro has been finalized, the cursor might have been broken
2515         cur.fixIfBroken();
2516
2517         // Has the cursor just left the inset?
2518         bool const leftinset = (&d->cursor_.inset() != &cur.inset());
2519         if (leftinset)
2520                 d->cursor_.fixIfBroken();
2521
2522         // FIXME: shift-mouse selection doesn't work well across insets.
2523         bool const do_selection =
2524                         select && &d->cursor_.normalAnchor().inset() == &cur.inset();
2525
2526         // do the dEPM magic if needed
2527         // FIXME: (1) move this to InsetText::notifyCursorLeaves?
2528         // FIXME: (2) if we had a working InsetText::notifyCursorLeaves,
2529         // the leftinset bool would not be necessary (badcursor instead).
2530         bool update = leftinset;
2531         if (!do_selection && d->cursor_.inTexted())
2532                 update |= checkDepm(cur, d->cursor_);
2533
2534         if (!do_selection)
2535                 d->cursor_.resetAnchor();
2536         d->cursor_.setCursor(cur);
2537         d->cursor_.boundary(cur.boundary());
2538         if (do_selection)
2539                 d->cursor_.setSelection();
2540         else
2541                 d->cursor_.clearSelection();
2542
2543         d->cursor_.finishUndo();
2544         d->cursor_.setCurrentFont();
2545         if (update)
2546                 cur.forceBufferUpdate();
2547         return update;
2548 }
2549
2550
2551 void BufferView::putSelectionAt(DocIterator const & cur,
2552                                 int length, bool backwards)
2553 {
2554         d->cursor_.clearSelection();
2555
2556         setCursor(cur);
2557
2558         if (length) {
2559                 if (backwards) {
2560                         d->cursor_.pos() += length;
2561                         d->cursor_.setSelection(d->cursor_, -length);
2562                 } else
2563                         d->cursor_.setSelection(d->cursor_, length);
2564         }
2565 }
2566
2567
2568 bool BufferView::selectIfEmpty(DocIterator & cur)
2569 {
2570         if ((cur.inTexted() && !cur.paragraph().empty())
2571             || (cur.inMathed() && !cur.cell().empty()))
2572                 return false;
2573
2574         pit_type const beg_pit = cur.pit();
2575         if (beg_pit > 0) {
2576                 // The paragraph associated to this item isn't
2577                 // the first one, so it can be selected
2578                 cur.backwardPos();
2579         } else {
2580                 // We have to resort to select the space between the
2581                 // end of this item and the begin of the next one
2582                 cur.forwardPos();
2583         }
2584         if (cur.empty()) {
2585                 // If it is the only item in the document,
2586                 // nothing can be selected
2587                 return false;
2588         }
2589         pit_type const end_pit = cur.pit();
2590         pos_type const end_pos = cur.pos();
2591         d->cursor_.clearSelection();
2592         d->cursor_.reset();
2593         d->cursor_.setCursor(cur);
2594         d->cursor_.pit() = beg_pit;
2595         d->cursor_.pos() = 0;
2596         d->cursor_.setSelection(false);
2597         d->cursor_.resetAnchor();
2598         d->cursor_.pit() = end_pit;
2599         d->cursor_.pos() = end_pos;
2600         d->cursor_.setSelection();
2601         return true;
2602 }
2603
2604
2605 Cursor & BufferView::cursor()
2606 {
2607         return d->cursor_;
2608 }
2609
2610
2611 Cursor const & BufferView::cursor() const
2612 {
2613         return d->cursor_;
2614 }
2615
2616
2617 pit_type BufferView::anchor_ref() const
2618 {
2619         return d->anchor_pit_;
2620 }
2621
2622
2623 bool BufferView::singleParUpdate()
2624 {
2625         Text & buftext = buffer_.text();
2626         pit_type const bottom_pit = d->cursor_.bottom().pit();
2627         TextMetrics & tm = textMetrics(&buftext);
2628         int old_height = tm.parMetrics(bottom_pit).height();
2629
2630         // make sure inline completion pointer is ok
2631         if (d->inlineCompletionPos_.fixIfBroken())
2632                 d->inlineCompletionPos_ = DocIterator();
2633
2634         // In Single Paragraph mode, rebreak only
2635         // the (main text, not inset!) paragraph containing the cursor.
2636         // (if this paragraph contains insets etc., rebreaking will
2637         // recursively descend)
2638         tm.redoParagraph(bottom_pit);
2639         ParagraphMetrics const & pm = tm.parMetrics(bottom_pit);
2640         if (pm.height() != old_height)
2641                 // Paragraph height has changed so we cannot proceed to
2642                 // the singlePar optimisation.
2643                 return false;
2644
2645         d->update_strategy_ = SingleParUpdate;
2646
2647         LYXERR(Debug::PAINTING, "\ny1: " << pm.position() - pm.ascent()
2648                 << " y2: " << pm.position() + pm.descent()
2649                 << " pit: " << bottom_pit
2650                 << " singlepar: 1");
2651         return true;
2652 }
2653
2654
2655 void BufferView::updateMetrics()
2656 {
2657         if (height_ == 0 || width_ == 0)
2658                 return;
2659
2660         Text & buftext = buffer_.text();
2661         pit_type const npit = int(buftext.paragraphs().size());
2662
2663         // Clear out the position cache in case of full screen redraw,
2664         d->coord_cache_.clear();
2665
2666         // Clear out paragraph metrics to avoid having invalid metrics
2667         // in the cache from paragraphs not relayouted below
2668         // The complete text metrics will be redone.
2669         d->text_metrics_.clear();
2670
2671         TextMetrics & tm = textMetrics(&buftext);
2672
2673         // make sure inline completion pointer is ok
2674         if (d->inlineCompletionPos_.fixIfBroken())
2675                 d->inlineCompletionPos_ = DocIterator();
2676
2677         if (d->anchor_pit_ >= npit)
2678                 // The anchor pit must have been deleted...
2679                 d->anchor_pit_ = npit - 1;
2680
2681         // Rebreak anchor paragraph.
2682         tm.redoParagraph(d->anchor_pit_);
2683         ParagraphMetrics & anchor_pm = tm.par_metrics_[d->anchor_pit_];
2684
2685         // position anchor
2686         if (d->anchor_pit_ == 0) {
2687                 int scrollRange = d->scrollbarParameters_.max - d->scrollbarParameters_.min;
2688
2689                 // Complete buffer visible? Then it's easy.
2690                 if (scrollRange == 0)
2691                         d->anchor_ypos_ = anchor_pm.ascent();
2692
2693                 // FIXME: Some clever handling needed to show
2694                 // the _first_ paragraph up to the top if the cursor is
2695                 // in the first line.
2696         }
2697         anchor_pm.setPosition(d->anchor_ypos_);
2698
2699         LYXERR(Debug::PAINTING, "metrics: "
2700                 << " anchor pit = " << d->anchor_pit_
2701                 << " anchor ypos = " << d->anchor_ypos_);
2702
2703         // Redo paragraphs above anchor if necessary.
2704         int y1 = d->anchor_ypos_ - anchor_pm.ascent();
2705         // We are now just above the anchor paragraph.
2706         pit_type pit1 = d->anchor_pit_ - 1;
2707         for (; pit1 >= 0 && y1 >= 0; --pit1) {
2708                 tm.redoParagraph(pit1);
2709                 ParagraphMetrics & pm = tm.par_metrics_[pit1];
2710                 y1 -= pm.descent();
2711                 // Save the paragraph position in the cache.
2712                 pm.setPosition(y1);
2713                 y1 -= pm.ascent();
2714         }
2715
2716         // Redo paragraphs below the anchor if necessary.
2717         int y2 = d->anchor_ypos_ + anchor_pm.descent();
2718         // We are now just below the anchor paragraph.
2719         pit_type pit2 = d->anchor_pit_ + 1;
2720         for (; pit2 < npit && y2 <= height_; ++pit2) {
2721                 tm.redoParagraph(pit2);
2722                 ParagraphMetrics & pm = tm.par_metrics_[pit2];
2723                 y2 += pm.ascent();
2724                 // Save the paragraph position in the cache.
2725                 pm.setPosition(y2);
2726                 y2 += pm.descent();
2727         }
2728
2729         LYXERR(Debug::PAINTING, "Metrics: "
2730                 << " anchor pit = " << d->anchor_pit_
2731                 << " anchor ypos = " << d->anchor_ypos_
2732                 << " y1 = " << y1
2733                 << " y2 = " << y2
2734                 << " pit1 = " << pit1
2735                 << " pit2 = " << pit2);
2736
2737         d->update_strategy_ = FullScreenUpdate;
2738
2739         if (lyxerr.debugging(Debug::WORKAREA)) {
2740                 LYXERR(Debug::WORKAREA, "BufferView::updateMetrics");
2741                 d->coord_cache_.dump();
2742         }
2743 }
2744
2745
2746 void BufferView::insertLyXFile(FileName const & fname)
2747 {
2748         LASSERT(d->cursor_.inTexted(), return);
2749
2750         // Get absolute path of file and add ".lyx"
2751         // to the filename if necessary
2752         FileName filename = fileSearch(string(), fname.absFileName(), "lyx");
2753
2754         docstring const disp_fn = makeDisplayPath(filename.absFileName());
2755         // emit message signal.
2756         message(bformat(_("Inserting document %1$s..."), disp_fn));
2757
2758         docstring res;
2759         Buffer buf(filename.absFileName(), false);
2760         if (buf.loadLyXFile() == Buffer::ReadSuccess) {
2761                 ErrorList & el = buffer_.errorList("Parse");
2762                 // Copy the inserted document error list into the current buffer one.
2763                 el = buf.errorList("Parse");
2764                 buffer_.undo().recordUndo(d->cursor_);
2765                 cap::pasteParagraphList(d->cursor_, buf.paragraphs(),
2766                                              buf.params().documentClassPtr(), el);
2767                 res = _("Document %1$s inserted.");
2768         } else {
2769                 res = _("Could not insert document %1$s");
2770         }
2771
2772         buffer_.changed(true);
2773         // emit message signal.
2774         message(bformat(res, disp_fn));
2775 }
2776
2777
2778 Point BufferView::coordOffset(DocIterator const & dit) const
2779 {
2780         int x = 0;
2781         int y = 0;
2782         int lastw = 0;
2783
2784         // Addup contribution of nested insets, from inside to outside,
2785         // keeping the outer paragraph for a special handling below
2786         for (size_t i = dit.depth() - 1; i >= 1; --i) {
2787                 CursorSlice const & sl = dit[i];
2788                 int xx = 0;
2789                 int yy = 0;
2790
2791                 // get relative position inside sl.inset()
2792                 sl.inset().cursorPos(*this, sl, dit.boundary() && (i + 1 == dit.depth()), xx, yy);
2793
2794                 // Make relative position inside of the edited inset relative to sl.inset()
2795                 x += xx;
2796                 y += yy;
2797
2798                 // In case of an RTL inset, the edited inset will be positioned to the left
2799                 // of xx:yy
2800                 if (sl.text()) {
2801                         bool boundary_i = dit.boundary() && i + 1 == dit.depth();
2802                         bool rtl = textMetrics(sl.text()).isRTL(sl, boundary_i);
2803                         if (rtl)
2804                                 x -= lastw;
2805                 }
2806
2807                 // remember width for the case that sl.inset() is positioned in an RTL inset
2808                 if (i && dit[i - 1].text()) {
2809                         // If this Inset is inside a Text Inset, retrieve the Dimension
2810                         // from the containing text instead of using Inset::dimension() which
2811                         // might not be implemented.
2812                         // FIXME (Abdel 23/09/2007): this is a bit messy because of the
2813                         // elimination of Inset::dim_ cache. This coordOffset() method needs
2814                         // to be rewritten in light of the new design.
2815                         Dimension const & dim = coordCache().getInsets().dim(&sl.inset());
2816                         lastw = dim.wid;
2817                 } else {
2818                         Dimension const dim = sl.inset().dimension(*this);
2819                         lastw = dim.wid;
2820                 }
2821
2822                 //lyxerr << "Cursor::getPos, i: "
2823                 // << i << " x: " << xx << " y: " << y << endl;
2824         }
2825
2826         // Add contribution of initial rows of outermost paragraph
2827         CursorSlice const & sl = dit[0];
2828         TextMetrics const & tm = textMetrics(sl.text());
2829         ParagraphMetrics const & pm = tm.parMetrics(sl.pit());
2830
2831         LBUFERR(!pm.rows().empty());
2832         y -= pm.rows()[0].ascent();
2833 #if 1
2834         // FIXME: document this mess
2835         size_t rend;
2836         if (sl.pos() > 0 && dit.depth() == 1) {
2837                 int pos = sl.pos();
2838                 if (pos && dit.boundary())
2839                         --pos;
2840 //              lyxerr << "coordOffset: boundary:" << dit.boundary() << " depth:" << dit.depth() << " pos:" << pos << " sl.pos:" << sl.pos() << endl;
2841                 rend = pm.pos2row(pos);
2842         } else
2843                 rend = pm.pos2row(sl.pos());
2844 #else
2845         size_t rend = pm.pos2row(sl.pos());
2846 #endif
2847         for (size_t rit = 0; rit != rend; ++rit)
2848                 y += pm.rows()[rit].height();
2849         y += pm.rows()[rend].ascent();
2850
2851         TextMetrics const & bottom_tm = textMetrics(dit.bottom().text());
2852
2853         // Make relative position from the nested inset now bufferview absolute.
2854         int xx = bottom_tm.cursorX(dit.bottom(), dit.boundary() && dit.depth() == 1);
2855         x += xx;
2856
2857         // In the RTL case place the nested inset at the left of the cursor in
2858         // the outer paragraph
2859         bool boundary_1 = dit.boundary() && 1 == dit.depth();
2860         bool rtl = bottom_tm.isRTL(dit.bottom(), boundary_1);
2861         if (rtl)
2862                 x -= lastw;
2863
2864         return Point(x, y);
2865 }
2866
2867
2868 Point BufferView::getPos(DocIterator const & dit) const
2869 {
2870         if (!paragraphVisible(dit))
2871                 return Point(-1, -1);
2872
2873         CursorSlice const & bot = dit.bottom();
2874         TextMetrics const & tm = textMetrics(bot.text());
2875
2876         // offset from outer paragraph
2877         Point p = coordOffset(dit);
2878         p.y_ += tm.parMetrics(bot.pit()).position();
2879         return p;
2880 }
2881
2882
2883 bool BufferView::paragraphVisible(DocIterator const & dit) const
2884 {
2885         CursorSlice const & bot = dit.bottom();
2886         TextMetrics const & tm = textMetrics(bot.text());
2887
2888         return tm.contains(bot.pit());
2889 }
2890
2891
2892 void BufferView::cursorPosAndHeight(Point & p, int & h) const
2893 {
2894         Cursor const & cur = cursor();
2895         Font const font = cur.getFont();
2896         frontend::FontMetrics const & fm = theFontMetrics(font);
2897         int const asc = fm.maxAscent();
2898         int const des = fm.maxDescent();
2899         h = asc + des;
2900         p = getPos(cur);
2901         p.y_ -= asc;
2902 }
2903
2904
2905 bool BufferView::cursorInView(Point const & p, int h) const
2906 {
2907         Cursor const & cur = cursor();
2908         // does the cursor touch the screen ?
2909         if (p.y_ + h < 0 || p.y_ >= workHeight() || !paragraphVisible(cur))
2910                 return false;
2911         return true;
2912 }
2913
2914
2915 int BufferView::horizScrollOffset() const
2916 {
2917         return d->horiz_scroll_offset_;
2918 }
2919
2920
2921 CursorSlice const & BufferView::currentRowSlice() const
2922 {
2923         return d->current_row_slice_;
2924 }
2925
2926
2927 CursorSlice const & BufferView::lastRowSlice() const
2928 {
2929         return d->last_row_slice_;
2930 }
2931
2932
2933 void BufferView::setCurrentRowSlice(CursorSlice const & rowSlice)
2934 {
2935         // nothing to do if the cursor was already on this row
2936         if (d->current_row_slice_ == rowSlice) {
2937                 d->last_row_slice_ = CursorSlice();
2938                 return;
2939         }
2940
2941         // if the (previous) current row was scrolled, we have to
2942         // remember it in order to repaint it next time.
2943         if (d->horiz_scroll_offset_ != 0)
2944                 d->last_row_slice_ = d->current_row_slice_;
2945         else
2946                 d->last_row_slice_ = CursorSlice();
2947
2948         // Since we changed row, the scroll offset is not valid anymore
2949         d->horiz_scroll_offset_ = 0;
2950         d->current_row_slice_ = rowSlice;
2951 }
2952
2953
2954 void BufferView::checkCursorScrollOffset(PainterInfo & pi)
2955 {
2956         CursorSlice rowSlice = d->cursor_.bottom();
2957         TextMetrics const & tm = textMetrics(rowSlice.text());
2958
2959         // Stop if metrics have not been computed yet, since it means
2960         // that there is nothing to do.
2961         if (!tm.contains(rowSlice.pit()))
2962                 return;
2963         ParagraphMetrics const & pm = tm.parMetrics(rowSlice.pit());
2964         Row const & row = pm.getRow(rowSlice.pos(),
2965                                     d->cursor_.boundary() && rowSlice == d->cursor_.top());
2966         rowSlice.pos() = row.pos();
2967
2968         // Set the row on which the cursor lives.
2969         setCurrentRowSlice(rowSlice);
2970
2971         // If insets referred to by cursor are not all in the cache, the positions
2972         // need to be recomputed.
2973         if (!d->cursor_.inCoordCache()) {
2974                 /** FIXME: the code below adds an extraneous computation of
2975                  * inset positions, and can therefore be bad for performance
2976                  * (think for example about a very large tabular inset.
2977                  * Redawing the row where it is means redrawing the whole
2978                  * screen).
2979                  *
2980                  * The bug that this fixes is the following: assume that there
2981                  * is a very large math inset. Upon entering the inset, when
2982                  * pressing `End', the row is not scrolled and the cursor is
2983                  * not visible. The extra row computation makes sure that the
2984                  * inset positions are correctly computed and set in the
2985                  * cache. This would not happen if we did not have two-stage
2986                  * drawing.
2987                  *
2988                  * A proper fix would be to always have proper inset positions
2989                  * at this point.
2990                  */
2991                 // Force the recomputation of inset positions
2992                 bool const drawing = pi.pain.isDrawingEnabled();
2993                 pi.pain.setDrawingEnabled(false);
2994                 // No need to care about vertical position.
2995                 RowPainter rp(pi, buffer().text(), d->cursor_.bottom().pit(), row,
2996                               -d->horiz_scroll_offset_, 0);
2997                 rp.paintText();
2998                 pi.pain.setDrawingEnabled(drawing);
2999         }
3000
3001         // Current x position of the cursor in pixels
3002         int cur_x = getPos(d->cursor_).x_;
3003
3004         // Horizontal scroll offset of the cursor row in pixels
3005         int offset = d->horiz_scroll_offset_;
3006         int const MARGIN = 2 * theFontMetrics(d->cursor_.real_current_font).em()
3007                            + row.right_margin;
3008         if (row.right_x() <= workWidth() - row.right_margin) {
3009                 // Row is narrower than the work area, no offset needed.
3010                 offset = 0;
3011         } else {
3012                 if (cur_x - offset < MARGIN) {
3013                         // cursor would be too far right
3014                         offset = cur_x - MARGIN;
3015                 } else if (cur_x - offset > workWidth() - MARGIN) {
3016                         // cursor would be too far left
3017                         offset = cur_x - workWidth() + MARGIN;
3018                 }
3019                 // Correct the offset to make sure that we do not scroll too much
3020                 if (offset < 0)
3021                         offset = 0;
3022                 if (row.right_x() - offset < workWidth() - row.right_margin)
3023                         offset = row.right_x() - workWidth() + row.right_margin;
3024         }
3025
3026         //lyxerr << "cur_x=" << cur_x << ", offset=" << offset << ", row.wid=" << row.width() << ", margin=" << MARGIN << endl;
3027
3028         if (offset != d->horiz_scroll_offset_)
3029                 LYXERR(Debug::PAINTING, "Horiz. scroll offset changed from "
3030                        << d->horiz_scroll_offset_ << " to " << offset);
3031
3032         if (d->update_strategy_ == NoScreenUpdate
3033             && (offset != d->horiz_scroll_offset_
3034                 || !d->last_row_slice_.empty())) {
3035                 // FIXME: if one uses SingleParUpdate, then home/end
3036                 // will not work on long rows. Why?
3037                 d->update_strategy_ = FullScreenUpdate;
3038         }
3039
3040         d->horiz_scroll_offset_ = offset;
3041 }
3042
3043
3044 void BufferView::draw(frontend::Painter & pain)
3045 {
3046         if (height_ == 0 || width_ == 0)
3047                 return;
3048         LYXERR(Debug::PAINTING, "\t\t*** START DRAWING ***");
3049
3050         Text & text = buffer_.text();
3051         TextMetrics const & tm = d->text_metrics_[&text];
3052         int const y = tm.first().second->position();
3053         PainterInfo pi(this, pain);
3054
3055         // Check whether the row where the cursor lives needs to be scrolled.
3056         // Update the drawing strategy if needed.
3057         checkCursorScrollOffset(pi);
3058
3059         switch (d->update_strategy_) {
3060
3061         case NoScreenUpdate:
3062                 // If no screen painting is actually needed, only some the different
3063                 // coordinates of insets and paragraphs needs to be updated.
3064                 LYXERR(Debug::PAINTING, "Strategy: NoScreenUpdate");
3065                 pi.full_repaint = true;
3066                 pi.pain.setDrawingEnabled(false);
3067                 tm.draw(pi, 0, y);
3068                 break;
3069
3070         case SingleParUpdate:
3071                 pi.full_repaint = false;
3072                 LYXERR(Debug::PAINTING, "Strategy: SingleParUpdate");
3073                 // In general, only the current row of the outermost paragraph
3074                 // will be redrawn. Particular cases where selection spans
3075                 // multiple paragraph are correctly detected in TextMetrics.
3076                 tm.draw(pi, 0, y);
3077                 break;
3078
3079         case DecorationUpdate:
3080                 // FIXME: We should also distinguish DecorationUpdate to avoid text
3081                 // drawing if possible. This is not possible to do easily right now
3082                 // because of the single backing pixmap.
3083
3084         case FullScreenUpdate:
3085
3086                 LYXERR(Debug::PAINTING,
3087                        ((d->update_strategy_ == FullScreenUpdate)
3088                         ? "Strategy: FullScreenUpdate"
3089                         : "Strategy: DecorationUpdate"));
3090
3091                 // The whole screen, including insets, will be refreshed.
3092                 pi.full_repaint = true;
3093
3094                 // Clear background.
3095                 pain.fillRectangle(0, 0, width_, height_,
3096                         pi.backgroundColor(&buffer_.inset()));
3097
3098                 // Draw everything.
3099                 tm.draw(pi, 0, y);
3100
3101                 // and possibly grey out below
3102                 pair<pit_type, ParagraphMetrics const *> lastpm = tm.last();
3103                 int const y2 = lastpm.second->position() + lastpm.second->descent();
3104
3105                 if (y2 < height_) {
3106                         Color color = buffer().isInternal()
3107                                 ? Color_background : Color_bottomarea;
3108                         pain.fillRectangle(0, y2, width_, height_ - y2, color);
3109                 }
3110                 break;
3111         }
3112         LYXERR(Debug::PAINTING, "\n\t\t*** END DRAWING  ***");
3113
3114         // The scrollbar needs an update.
3115         updateScrollbar();
3116
3117         // Normalize anchor for next time
3118         pair<pit_type, ParagraphMetrics const *> firstpm = tm.first();
3119         pair<pit_type, ParagraphMetrics const *> lastpm = tm.last();
3120         for (pit_type pit = firstpm.first; pit <= lastpm.first; ++pit) {
3121                 ParagraphMetrics const & pm = tm.parMetrics(pit);
3122                 if (pm.position() + pm.descent() > 0) {
3123                         d->anchor_pit_ = pit;
3124                         d->anchor_ypos_ = pm.position();
3125                         break;
3126                 }
3127         }
3128         LYXERR(Debug::PAINTING, "Found new anchor pit = " << d->anchor_pit_
3129                 << "  anchor ypos = " << d->anchor_ypos_);
3130 }
3131
3132
3133 void BufferView::message(docstring const & msg)
3134 {
3135         if (d->gui_)
3136                 d->gui_->message(msg);
3137 }
3138
3139
3140 void BufferView::showDialog(string const & name)
3141 {
3142         if (d->gui_)
3143                 d->gui_->showDialog(name, string());
3144 }
3145
3146
3147 void BufferView::showDialog(string const & name,
3148         string const & data, Inset * inset)
3149 {
3150         if (d->gui_)
3151                 d->gui_->showDialog(name, data, inset);
3152 }
3153
3154
3155 void BufferView::updateDialog(string const & name, string const & data)
3156 {
3157         if (d->gui_)
3158                 d->gui_->updateDialog(name, data);
3159 }
3160
3161
3162 void BufferView::setGuiDelegate(frontend::GuiBufferViewDelegate * gui)
3163 {
3164         d->gui_ = gui;
3165 }
3166
3167
3168 // FIXME: Move this out of BufferView again
3169 docstring BufferView::contentsOfPlaintextFile(FileName const & fname)
3170 {
3171         if (!fname.isReadableFile()) {
3172                 docstring const error = from_ascii(strerror(errno));
3173                 docstring const file = makeDisplayPath(fname.absFileName(), 50);
3174                 docstring const text =
3175                   bformat(_("Could not read the specified document\n"
3176                             "%1$s\ndue to the error: %2$s"), file, error);
3177                 Alert::error(_("Could not read file"), text);
3178                 return docstring();
3179         }
3180
3181         if (!fname.isReadableFile()) {
3182                 docstring const file = makeDisplayPath(fname.absFileName(), 50);
3183                 docstring const text =
3184                   bformat(_("%1$s\n is not readable."), file);
3185                 Alert::error(_("Could not open file"), text);
3186                 return docstring();
3187         }
3188
3189         // FIXME UNICODE: We don't know the encoding of the file
3190         docstring file_content = fname.fileContents("UTF-8");
3191         if (file_content.empty()) {
3192                 Alert::error(_("Reading not UTF-8 encoded file"),
3193                              _("The file is not UTF-8 encoded.\n"
3194                                "It will be read as local 8Bit-encoded.\n"
3195                                "If this does not give the correct result\n"
3196                                "then please change the encoding of the file\n"
3197                                "to UTF-8 with a program other than LyX.\n"));
3198                 file_content = fname.fileContents("local8bit");
3199         }
3200
3201         return normalize_c(file_content);
3202 }
3203
3204
3205 void BufferView::insertPlaintextFile(FileName const & f, bool asParagraph)
3206 {
3207         docstring const tmpstr = contentsOfPlaintextFile(f);
3208
3209         if (tmpstr.empty())
3210                 return;
3211
3212         Cursor & cur = cursor();
3213         cap::replaceSelection(cur);
3214         buffer_.undo().recordUndo(cur);
3215         if (asParagraph)
3216                 cur.innerText()->insertStringAsParagraphs(cur, tmpstr, cur.current_font);
3217         else
3218                 cur.innerText()->insertStringAsLines(cur, tmpstr, cur.current_font);
3219
3220         buffer_.changed(true);
3221 }
3222
3223
3224 docstring const & BufferView::inlineCompletion() const
3225 {
3226         return d->inlineCompletion_;
3227 }
3228
3229
3230 size_t const & BufferView::inlineCompletionUniqueChars() const
3231 {
3232         return d->inlineCompletionUniqueChars_;
3233 }
3234
3235
3236 DocIterator const & BufferView::inlineCompletionPos() const
3237 {
3238         return d->inlineCompletionPos_;
3239 }
3240
3241
3242 void BufferView::resetInlineCompletionPos()
3243 {
3244         d->inlineCompletionPos_ = DocIterator();
3245 }
3246
3247
3248 bool samePar(DocIterator const & a, DocIterator const & b)
3249 {
3250         if (a.empty() && b.empty())
3251                 return true;
3252         if (a.empty() || b.empty())
3253                 return false;
3254         if (a.depth() != b.depth())
3255                 return false;
3256         return &a.innerParagraph() == &b.innerParagraph();
3257 }
3258
3259
3260 void BufferView::setInlineCompletion(Cursor const & cur, DocIterator const & pos,
3261         docstring const & completion, size_t uniqueChars)
3262 {
3263         uniqueChars = min(completion.size(), uniqueChars);
3264         bool changed = d->inlineCompletion_ != completion
3265                 || d->inlineCompletionUniqueChars_ != uniqueChars;
3266         bool singlePar = true;
3267         d->inlineCompletion_ = completion;
3268         d->inlineCompletionUniqueChars_ = min(completion.size(), uniqueChars);
3269
3270         //lyxerr << "setInlineCompletion pos=" << pos << " completion=" << completion << " uniqueChars=" << uniqueChars << std::endl;
3271
3272         // at new position?
3273         DocIterator const & old = d->inlineCompletionPos_;
3274         if (old != pos) {
3275                 //lyxerr << "inlineCompletionPos changed" << std::endl;
3276                 // old or pos are in another paragraph?
3277                 if ((!samePar(cur, pos) && !pos.empty())
3278                     || (!samePar(cur, old) && !old.empty())) {
3279                         singlePar = false;
3280                         //lyxerr << "different paragraph" << std::endl;
3281                 }
3282                 d->inlineCompletionPos_ = pos;
3283         }
3284
3285         // set update flags
3286         if (changed) {
3287                 if (singlePar && !(cur.result().screenUpdate() & Update::Force))
3288                         cur.screenUpdateFlags(cur.result().screenUpdate() | Update::SinglePar);
3289                 else
3290                         cur.screenUpdateFlags(cur.result().screenUpdate() | Update::Force);
3291         }
3292 }
3293
3294
3295 bool BufferView::clickableInset() const
3296 {
3297         return d->clickable_inset_;
3298 }
3299
3300 } // namespace lyx