1 LyX file-format changes
2 -----------------------
4 Please keep the entries informative enough, i.e. try to indicate what
5 changes happened in particular if possible. A good example would be
8 Please also indicate the revision at which your change was committed.
9 This will help later people understand what you did, especially as
10 adjustments are made to tex2lyx and bugs are fixed in lyx2lyx.
12 -----------------------
14 2012-05-06 Georg Baum <Georg.Baum@post.rwth-aachen.de>
15 * Format incremented to 431
16 Add \use_package amssymb
18 2012-04-16 Georg Baum <Georg.Baum@post.rwth-aachen.de>
19 * Format incremented to 430 (2773345)
20 Support \lstlistoflistings in InsetTOC
22 2012-03-21 Uwe Stöhr <uwestoehr@web.de>
23 * Format incremented to 429 (ea54461d85)
24 support for table rotation
25 (table option "rotate" specifies now a number with the rotation angle)
27 2012-03-16 Uwe Stöhr <uwestoehr@web.de>
28 * Format incremented to 428 (7a46910f)
29 support for table cell rotation
30 (table cell option "rotate" specifies now a number with the rotation angle)
32 2012-03-06 Jürgen Spitzmüller <spitz@lyx.org>
33 * Format incremented to 427 (r40867)
34 Add native TIPA inset.
36 2012-02-20 Uwe Stöhr <uwestoehr@web.de>
37 * Format incremented to 426 (r40784)
38 support for the verbatim environment
41 2012-01-23 Uwe Stöhr <uwestoehr@web.de>
42 * Format incremented to 425 (r40663)
43 support for the LaTeX-package cancel (fix bug 6819)
45 2012-01-09 Julien Rioux <jrioux@lyx.org>
46 * Format incremented to 424 (r40592)
47 New buffer param \cite_engine_type to specify the type of
48 citation labels being used, authoryear or numerical.
50 2012-01-05 Georg Baum <Georg.Baum@post.rwth-aachen.de>
51 * Format incremented to 423 (r40574)
52 support for the LaTeX-package mathtools (fix bug 7949)
53 New buffer param \use_package mathtools
55 2012-01-03 Georg Baum <Georg.Baum@post.rwth-aachen.de>
56 * Format incremented to 422 (r40563)
57 \use_amsmath 0/1/2 => \use_package amsmath 0/1/2
58 \use_esint 0/1/2 => \use_package esint 0/1/2
59 \use_mhchem 0/1/2 => \use_package mhchem 0/1/2
60 \use_mathdots 0/1/2 => \use_package mathdots 0/1/2
61 \use_undertilde 0/1/2 => \use_package undertilde 0/1/2
63 2011-12-18 Georg Baum <Georg.Baum@post.rwth-aachen.de>
64 * Format incremented to 421 (r40522)
65 The caption flag of longtable rows is no longer exclusive to the head
66 and foot flags, since captions can occur in any of the two heads and
67 two foots. Before, captions were implicitly in head or firsthead.
68 For Docbook and XHTML output the caption flag "wins" over head/foot.
70 2011-12-12 Julien Rioux <jrioux@lyx.org>
71 * Format incremented to 420 (r40484)
72 New buffer param \biblio_style to specify a document-wide
73 default bibliography style (BibTeX style for the moment).
75 2011-12-09 Uwe Stöhr <uwestoehr@web.de>
76 * Format incremented to 419 (r40452)
77 support for the document languages australian and newzealand
79 2011-12-08 Richard Heck <rgheck@lyx.org>
80 * Format incremented to 418 (r40427)
81 Introduce justification preference.
83 2011-11-07 Julien Rioux <jrioux@lyx.org>
84 * Format incremented to 417 (r39982 and r40155)
85 Rename the japanese encodings to names understood by pLaTeX.
87 2011-08-29 Uwe Stöhr <uwestoehr@web.de>
88 * Format incremented to 416 (r39557)
89 support for \negmedspace and \negthinspace outside of math
90 support for \hfill, \enspace, \hspace* and \hspace*{\fill} in math
91 No new InsetSpace parameters
93 2011-07-30 Uwe Stöhr <uwestoehr@web.de>
94 * Format incremented to 415 (r39464)
95 support for the LaTeX-package undertilde (fix bug 6622)
96 New buffer param \use_undertilde
98 2011-07-02 Pavel Sanda <sanda@lyx.org>
99 * Format incremented to 414 (r39367)
100 New InsetSpace param \textvisiblespace
102 2011-02-15 Richard Heck <rgheck@comcast.net>
103 * Format incremented to 413 (r37682)
104 New buffer param \html_css_as_file to control whether
105 CSS is output to header to to style file
107 2011-02-03 Edwin Leuven <e.leuven@gmail.com>
108 * Format incremented to 412 (r37471)
109 Support tabular* : add tabularwidth parameter to
112 2011-02-03 Jürgen Spitzmüller <spitz@lyx.org>
113 * Format incremented to 411
114 New buffer param \language_package to allow per-document
115 language package selection (bug 2909).
117 2010-11-26 Richard Heck <rgheck@comcast.net>
118 * Format incremented to 410 (r36520)
119 Rename "\\begin_layout Labeling" to "\\begin_layout List"
120 in the KOMA (scr*) classes.
122 2010-11-26 Jürgen Spitzmüller <spitz@lyx.org>
123 * Format incremented to 409 (r36500)
124 Rename buffer param \use_xetex to \use_non_tex_fonts.
126 2010-11-21 Georg Baum <Georg.Baum@post.rwth-aachen.de>
127 * Format incremented to 408 (r36424)
128 New inset for sub/superscripts:
132 2010-11-07 Uwe Stöhr <uwestoehr@web.de>
133 * Format incremented to 407 (r36182)
134 Support for vertical offset of multirow cells.
135 New tag "mroffset" for multirow cells with an offset.
137 2010-11-06 Jean-Marc Lasgouttes <lasgouttes@lyx.org>
138 * Format incremented to 406 (r36163)
139 Proper ERT behaviour for normal layouts. Paragraph breaks
140 generate single \n in latex output when ParbreakIsNewline
143 2010-10-23 Vincent van Ravesteijn <vfr@lyx.org>
144 * Format incremented to 405 (r36134)
146 The authors that are used in change tracking are
147 now identified in the file by a number that represents
148 the hash value of the name and email. In this way
149 collaboration using version control leads to way less
152 2010-10-13 Richard Heck <rgheck@comcast.net>
153 * Format incremented to 404 (r35623)
154 Support for refstyle package.
155 Changed the LaTeXCommand for InsetRef from "prettyref"
156 to "formatted", where "formatted" is now interprted
157 differently, depending upon whether the new buffer param
158 use_refstyle is true or false.
160 2010-10-12 Richard Heck <rgheck@comcast.net>
161 * Format incremented to 403 (r35608)
162 Renaming of flex insets.
164 \begin_inset Flex TAG:Style
166 \begin_inset Flex Style
167 where TAG is Custom, CharStyle, or Element
169 2010-10-11 Uwe Stöhr <uwestoehr@web.de>
170 * Format incremented to 402 (r35590)
171 No new or removed parameter, used to insert a
172 clear(double)page before BibTeX inset.
174 2010-09-19 Ronen Abravanel <ronena@gmail.com>
175 * Format incremented to 401 (r35455)
176 Support for Feynman diagrams
177 New math command \Diagram
179 2010-09-07 Uwe Stöhr <uwestoehr@web.de>
180 * Format incremented to 400 (r35299)
181 Support for the LaTeX-command \rule.
182 New CommandInset "line".
184 2010-08-31 Uwe Stöhr <uwestoehr@web.de>
185 * Format incremented to 399 (r35241)
186 Support for the LaTeX-package mathdots.
187 New parameter \use_mathdots.
189 2010-07-17 Uwe Stöhr <uwestoehr@web.de>
190 * Format incremented to 398 (r34941)
192 No new parameter but the mathrsfs package will be loaded.
194 2010-07-16 Richard Heck <rgheck@comcast.net>
195 * Format incremented to 397 (r34920)
196 Remove Nameref support
198 2010-07-13 Richard Heck <rgheck@comcast.net>
199 * Format incremented to 396 (r34884)
201 new commands nameref and Nameref for InsetRef
203 2010-07-13 Uwe Stöhr <uwestoehr@web.de>
204 * Format incremented to 395 (r34883)
205 Support for ISO C-series paper format.
206 New parameter \papersize cxpaper with (x = 0 - 6).
208 2010-07-03 Uwe Stöhr <uwestoehr@web.de>
209 * Format incremented to 394 (r34748)
211 New box parameter \use_makebox.
213 2010-06-07 Richard Heck <rgheck@comcast.net>
214 * Format incremented to 393 (r34619)
215 Renaming in LyX format: \begin_inset OptArg becomes
216 \begin_inset Argument.
218 2010-06-07 Richard Heck <rgheck@comcast.net>
219 * Format incremented to 392 (r34615)
220 Dummy format change permitting Beamer files to be converted to
221 a new, more useful format.
223 2010-06-05 Edwin Leuven <e.leuven@uva.nl>
224 * Format incremented to 391 (r34598)
225 Added support for decimal alignment in tables.
227 2010-05-25 Pavel Sanda <sanda@lyx.org>
228 * Format incremented to 390: support for ouput sync (forward/reverse)
229 search. New boolean \forward_search and string \forward_macro.
231 2010-05-24 Richard Heck <rgheck@comcast.net>
232 * Format incremented to 389: remove quotes from html_latex_* params.
234 2010-05-18 Uwe Stöhr <uwestoehr@web.de>
235 * Format incremented to 388: support for page sizes A0-3, A6, B0-3, B6
238 2010-04-21 Richard heck <rgheck@comcast.net>
239 * Format incremented to 387: New options for XHTML math output.
240 New BufferParams: html_math_img_scale, html_latex_start,
243 2010-04-17 Richard heck <rgheck@comcast.net>
244 * Format incremented to 386: LyX version for InsetInfo:
245 new parameters: type "lyxinfo", arg "version".
247 2010-04-08 Uwe Stöhr <uwestoehr@web.de>
248 * Format incremented to 385: support to change the background color
249 for shaded boxes: new buffer parameter \boxbgcolor
251 2010-04-03 Uwe Stöhr <uwestoehr@web.de>
252 * Format incremented to 384: support to specify a document-wide
253 font color: new buffer parameter \fontcolor
255 2010-03-31 Uwe Stöhr <uwestoehr@web.de>
256 * Format incremented to 383: support for Turkmen
258 2010-03-31 Uwe Stöhr <uwestoehr@web.de>
259 * Format incremented to 382: support to change the font color
260 for greyed-out notes: new buffer parameter \notefontcolor
262 2010-03-28: Vincent van Ravesteijn <vfr@lyx.org>
263 * Format incremented to 381: support for new parameters
264 for \xymatrix: \xymatrix@!0, \xymatrix!R and \xymatrix!C.
266 2010-03-28: Vincent van Ravesteijn <vfr@lyx.org>
267 * Format incremented to 380: introduction of InsetPreview.
269 2010-03-18: Richard Heck <rgheck@comcast.net>
270 * Format incremented to 379: revise format 374
271 Replace boolean \html_use_mathml with \html_math_output,
272 which at the moment can be: MathML, HTML, Images, or LaTeX.
274 2010-02-12 Pavel Sanda <sanda@lyx.org>
275 * Format incremented to 378: support for revision InsetInfo.
276 Various "vcs-*" strings could be argument of arg parameter
277 in InsetInfo. This entry is a safety measure, no lyx2lyx
278 conversion is needed in fact.
280 2010-02-11 Uwe Stöhr <uwestoehr@web.de> and Edwin Leuven <e.leuven@uva.nl>
281 * Format incremented to 377: support for multirow cells in
284 2010-01-10 Jürgen Spitzmüller <spitz@lyx.org>
285 * Format incremented to 376: new buffer param
286 \maintain_unincluded_children. If true, the aux files of
287 non-included children (with \includeonly) are updated to
288 keep the counters and refs correct.
290 2010-01-06 Jürgen Spitzmüller <spitz@lyx.org>
291 * Format incremented to 375: add support for \includeonly
292 This adds a new buffer param list of relative filenames
293 which are output as \includeonly arguments, like this:
299 2009-12-30 Richard Heck <rgheck@comcast.net>
300 * Format incremented to 374: add html output options.
301 \html_use_mathml (boolean): whether to use MathML or images
302 \html_be_strict (boolean): whether to be XHTML 1.1 compliant
304 2009-12-07 Jürgen Spitzmüller <spitz@lyx.org>
305 * Format incremented to 373: merge g-brief-de and g-brief-en
306 classes into one g-brief class.
307 All German layout names are replaced by English ones, the
308 two classes are renamed to g-brief.
310 2009-11-29 Jürgen Spitzmüller <spitz@lyx.org>
311 * Format incremented to 372: new buffer param fontencoding.
312 This param holds a buffer-specific fontencoding (argument
313 of the fontenc package).
315 - global: use lyxrc.fontenc [this is the default]
316 - default: do not load the fontenc package at all
317 - <ENC>: real encodings such as "T1". Multiple encodings
318 can be separated by comma.
320 2009-11-11 Uwe Stöhr <uwestoehr@web.de>
321 * Format incremented to 371: add option to suppress the LaTeX
324 2009-07-20 Uwe Stöhr <uwestoehr@web.de>
325 * Format incremented to 370: introduce a document option to
326 suppress the default date.
328 2009-07-22 Vincent van Ravesteijn <vfr@lyx.org>
329 * Format incremented to 369: add the author ids to the list of
330 authors and let the numbering start with 1 in stead of 0.
332 2009-07-21 Jürgen Spitzmüller <spitz@lyx.org>, Uwe Stöhr <uwestoehr@web.de>
333 * Format incremented to 368: allow to use glue lengths for
335 We just revert hspaces with glue lengths to ERT, since the
336 inset didn't support them prior to format 368.
337 No explicit conversion.
339 2009-07-20 Uwe Stöhr <uwestoehr@web.de>
340 * Format incremented to 367: allow to use percent lengths for
341 vertical and horizontal spaces.
343 2009-07-20 Uwe Stöhr <uwestoehr@web.de>
344 * Format incremented to 366: allow to use percent lengths for the
345 paragraph skip separation.
347 2009-07-19 Uwe Stöhr <uwestoehr@web.de>
348 * Format incremented to 365: support for paragraph indentation.
350 2009-07-13 Jürgen Spitzmüller <spitz@lyx.org>
351 * Format incremented to 364: add \filename_suffix parameter
353 Possible values: 0, 1.
354 If "1", the branch name is appended to the filename on export
355 (e.g., <filename>-<suffix>.pdf).
357 2009-07-11 Uwe Stöhr <uwestoehr@web.de>
358 * Format incremented to 363: support for horizontal longtable
361 2009-06-11 Jürgen Spitzmüller <spitz@lyx.org>
362 * Format incremented to 362: support for the applemac encoding.
364 2009-05-25 Jürgen Spitzmüller <spitz@lyx.org>
365 * Format incremented to 361: support for custom setting of
366 bibliography (longest) label width.
367 Empty file format change.
369 2009-05-22 Jürgen Spitzmüller <spitz@lyx.org>
370 * Format incremented to 360: param width for nomencl_print
372 1.) adds a further value "width" to param set_width
375 2.) a param width, which takes a length
376 If "width" is chosen, we define the indendation of the nomencl
377 list via the optional argument of \printnomenclature, e.g.
378 \printnomenclature[2cm]{}
380 2009-05-22 Jürgen Spitzmüller <spitz@lyx.org>
381 * Format incremented to 359: param set_width for nomencl_print
382 CommandInset. This specifies how wide the longest nomencl label
383 is (i.e., how wide the indendation in the nomencl list is).
385 - none: do not specifiy the width (use predefined values)
386 - auto: compute the widest label and specify via
387 \settowidth{\nomlabelwidth}{<widest label>}
389 2009-05-22 Jürgen Spitzmüller <spitz@lyx.org>
390 * Format incremented to 358: support for custom bibtex and
393 2009-05-05 Pavel Sanda <sanda@lyx.org>, Enrico Forestieri <forenr@lyx.org>
394 * Format incremented to 357: Change of the latex output for
395 underline from \underbar to ulem's \uline.
397 2009-05-05 Pavel Sanda <sanda@lyx.org>
398 * Format incremented to 356: support for double and wave underline
399 character styles via ulem's \uuline and \uwave
401 2009-05-03 Pavel Sanda <sanda@lyx.org>
402 * Format incremented to 355: support for strikeout character
403 style via ulem's \sout
405 2009-04-26 Jürgen Spitzmüller <spitz@lyx.org>
406 * Format incremented to 354: support for splitindex's
407 \printindex* and \printsubindex*.
409 2009-04-26 Jürgen Spitzmüller <spitz@lyx.org>
410 * Format incremented to 353: support for splitindex's
413 2009-04-15 Jürgen Spitzmüller <spitz@lyx.org>
414 * Format incremented to 352: splitindex support.
416 2009-04-11 Uwe Stöhr <uwestoehr@web.de>
417 * Format incremented to 351: support to set a page background
420 2009-04-06 Jürgen Spitzmüller <spitz@lyx.org>
421 * Format incremented to 350: new param \default_output_format.
423 2009-04-05 Jürgen Spitzmüller <spitz@lyx.org>
424 * Format incremented to 349: initial support for XeTeX.
426 2009-01-30 Uwe Stöhr <uwestoehr@web.de>
427 * Format incremented to 348: support for \*phantom.
429 2009-01-03 Vincent van Ravesteijn <V.F.vanRavesteijn@tudelft.nl>
430 * Format incremented to 347: support for tabular valign.
432 2008-11-28 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
433 * Format incremented to 346: support for German (Switzerland):
436 2008-11-07 José Matos <jamatos@lyx.org>
437 * Format incremented to 345: for docbook backend CharStyle: -> Element:
440 2008-10-12 Pavel Sanda <sanda@lyx.org>
441 * Format incremented to 344: sanitize backreference settings
442 for hyperref (fix bug 5340).
444 2008-10-12 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
445 * Format incremented to 343: new param \use_default_options
448 2008-10-12 Uwe Stöhr <uwestoehr@web.de>
449 * Format incremented to 342: support for Mongolian.
451 2008-09-30 Uwe Stöhr <uwestoehr@web.de>
452 * Format incremented to 341: support for TABs in listings.
454 2008-08-01 José Matos <jamatos@fc.up.pt>
455 * Format incremented to 340: move empty layouts to "Plain Layout".
457 2008-07-28 Richard Heck <rgheck@brown.edu>
458 * Format incremented to 339: removal of default modules.
460 2008-06-21 Uwe Stöhr <uwestoehr@web.de>
461 * Format incremented to 338: support for polytonic Greek.
463 2008-06-13 Abdelrazak Younes <younes@lyx.org>
464 * Format incremented to 337: convert/revert graphics display param.
466 2008-06-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
467 * Format incremented to 336: new param \font_cjk.
469 2008-05-30 Richard Heck <rgheck@brown.edu>
470 * Format incremented to 335: fixes for InsetSpace problems.
472 2008-05-16 Uwe Stöhr <uwestoehr@web.de>
473 * Format incremented to 334: fix for bug 4868.
475 2008-05-09 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
476 * Format incremented to 333: fixes in the APA layout.
478 2008-05-06 Pavel Sanda <sanda@lyx.org>
479 * Format incremented to 332: Added groupId for graphics insets.
481 2008-25-04 Helge Hafting <helge.hafting@aitel.hist.no>
482 * Format incremented to 330: More horizontal fills
483 - \leftarrowfill, \rightarrowfill
484 - \upbracefill, \downbracefill
486 2008-04-28 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
487 * Format incremented to 329: new param \master.
489 2008-04-18 Bo Peng <ben.bob@gmail.com>
490 * Format incremented to 328: Revert the support for embedding
492 2008-04-16 Uwe Stöhr <uwestoehr@web.de>
493 * Format incremented to 327: support for Mexican Spanish.
495 2008-04-11 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
496 * Format incremented to 326: support for pdflatex via external inset.
498 2008-03-29 Uwe Stöhr <uwestoehr@web.de>
499 * Format incremented to 325: merge the two Japanese languages to one that is
500 encoding independent.
502 2008-03-25 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
503 * Format incremented to 324: merge the two newline insets.
505 2008-03-25 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
506 * Format incremented to 323: merge the diverse newpage insets.
508 2008-03-24 Richard Heck <rgheck@comcast.net>
509 * Format incremented to 322: local layout
511 2008-03-18 Edwin Leuven <e.leuven@uva.nl>
512 * Format incremented to 321: drop row/col lines and ensure
513 consistency between cell and row/col lines.
514 Make the separation between \begin_inset and Tabular a
515 single space (it used to be a double space for lyx < 1.4)
517 2008-03-18 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
518 * Format incremented to 320: support for protected horizontal fill
521 2008-03-10 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
522 * Format incremented to 319: hspace and extended hfill support
524 2008-03-09 Bo Peng <ben.bob@gmail.com>
525 * Format incremented to 318: add \extra_embedded_files to buffer params
527 2008-03-02 Uwe Stöhr <uwestoehr@web.de>
528 * Format incremented to 317: support floating placements for wrap floats
530 2008-03-02 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
531 * Format incremented to 316: support for subfloats (subfig package)
533 2008-02-18 Richard Heck <rgheck@comcast.net>
534 * Format incremented to 315: support for column separation in page margins
536 2008-02-03 Uwe Stöhr <uwestoehr@web.de>
537 * Format incremented to 314: adapt scrlttr2 class for serial letters
539 2008-01-12 Richard Heck <rgheck@comcast.net>
540 * Format incremented to 313: change in how modules are represented
542 2008-01-11 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
543 * Format incremented to 312: support for sidewaysalgorithm (rotfloat)
544 and wide sideways{figure,table}.
546 2008-01-10 Richard Heck <rgheck@comcast.net>
547 * Format incremented to 311: dummy format to drive the AMS conversion
549 2007-12-28 Bernhard Reiter <ockham@gmx.net>
550 * Format incremented to 310: support for \nocite{*}
552 2007-12-11 Bernhard Reiter <ockham@gmx.net>
553 * Format incremented to 309: support for \nocite
555 2007-12-15 Uwe Stöhr <uwestoehr@web.de>
556 * Format incremented to 308: support for Serbian (Latin)
558 2007-12-05 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
559 * Format incremented to 307: support for \slash and \nobreakdash
561 2007-12-05 Uwe Stöhr <uwestoehr@web.de>
562 * Format incremented to 306: support for Interlingua
564 2007-12-05 Uwe Stöhr <uwestoehr@web.de>
565 * Format incremented to 305: support for Bahasa Malaysia
567 2007-12-03 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
568 * Format incremented to 304: framed and shaded boxes are now real boxes
571 2007-11-25 Uwe Stöhr <uwestoehr@web.de>
572 * Format incremented to 303: remove Serbocroatian as this was not a real
573 babel language (Croatian was used instead in the background)
576 2007-11-25 Uwe Stöhr <uwestoehr@web.de>
577 * Format incremented to 302: support for Latin and North Sami
579 2007-11-24 Uwe Stöhr <uwestoehr@web.de>
580 * Format incremented to 301: support for \linebreak
582 2007-11-23 Uwe Stöhr <uwestoehr@web.de>
583 * Format incremented to 300: support for \pagebreak
585 2007-11-01 Uwe Stöhr <uwestoehr@web.de>
586 * Format incremented to 299: support for hyperlink types
588 2007-11-01 Stefan Schimanski <sts@1stein.org>
589 * Format incremented to 298: math-macro code has been rewritten,
590 now it supports definitions with optional parameters
592 2007-10-29 Uwe Stöhr <uwestoehr@web.de>
593 * Format incremented to 297: support for Albanian, lower Sorbian,
594 fixed upper Sorbian language
596 2007-10-23 Richard Heck <rgheck@comcast.net>
597 * Format incremented to 296: InsetInclude becomes an InsetCommand
599 2007-10-12 Uwe Stöhr <uwestoehr@web.de>
600 * Format incremented to 295: get rid of the htmlurl command that was
601 needed for docbook, add the option to create a hyperlink instead
603 2007-10-12 Pavel Sanda <ps@twin.jikos.cz>
604 * Format incremented to 294: PDFOptions: add usetitle,
607 2007-10-11 Bo Peng <ben.bob@gmail.com>
608 * Format incremented to 293: Add InsetInfo.
610 2007-10-09 Uwe Stöhr <uwestoehr@web.de>
611 * Format incremented to 292: Support for Japanese without
612 using CJK and inputenc. (japanese-plain)
614 2007-10-04 Uwe Stöhr <uwestoehr@web.de>
615 * Format incremented to 291: Support for Vietnamese.
617 2007-10-03 Uwe Stöhr <uwestoehr@web.de>
618 * Format incremented to 290: Add table wrap floats
620 2007-10-03 Martin Vermeer <martin.vermeer@tkk.fi>
621 * Format incremented to 289: make Index a collapsable inset.
623 2007-09-25 Richard Heck <rgheck@comcast.net>
624 * Format incremented to 288: Change how command insets are
625 represented in LyX files.
627 2007-09-24 Uwe Stöhr <uwestoehr@web.de>
628 * Format incremented to 287: Add missing optional parameters
631 2007-09-21 Pavel Sanda <ps@twin.jikos.cz>
632 * Format incremented to 286: LyX now supports hyperref and some
635 2007-09-11 Bo Peng <ben.bob@gmail.com>
636 * Format incremented to 285: Tweaks to embedded file format
637 Remove inzip parameter from graphics insets.
639 2007-09-09 Helge Hafting <helge.hafting@aitel.hist.no>
640 * Format incremented to 284: LyX now implements wrapped figures
641 using wrapfig.sty instead of floatflt.sty. The latter
642 is rather buggy, the former also has more options.
643 No conversion as the .lyx doesn't change.
644 The .tex export is slightly different, necessitating the
647 2007-09-08 Martin Vermeer <martin.vermeer@tkk.fi>
649 * format incremented to 283: CharStyle insets are now
652 2007-08-31 Bo Peng <ben.bob@gmail.com>
654 * format incremented to 282: lyx files can be zipfiles with
657 2007-08-29 Richard Heck <rgheck@comcast.net>
659 * format incremented to 281: allow modules for layout files
661 2007-08-17 Martin Vermeer <martin.vermeer@tkk.fi>
663 * format incremented to 280: the show_label parameter
664 is depreciated in favour of (Collapsable) status.
666 2007-08-17 Martin Vermeer <martin.vermeer@tkk.fi>
668 * format incremented to 279: CharStyle names are now
669 expected to be of form CharStyle:Name.
671 2007-08-12 José Matos <jamatos@fc.up.pt>
673 * format incremented to 278: Close begin_deeper with a
674 corresponding end_deeper (the only case where it matters is
675 at the end of the body).
677 2007-08-12 José Matos <jamatos@fc.up.pt>
679 * format incremented to 277: lyx is able to create invalid
680 table where a multicolumn does not have a first cell
681 (required by the table file format)
683 2007-07-20 Dov Feldstern <dov@lyx.org>
685 * format *not* incremented; fixed format 249 conversion, so that it now
686 correctly deals with encodings in footnotes (part of bug 3613)
688 2007-06-26 Uwe Stöhr <uwestoehr@web.de> and Dov Feldstern <dov@lyx.org>
690 * format incremented to 276: switching exsting language 'arabic' to
691 'arabic_arabtex'; this is to differentiate from the new arabic support
692 using the arabi package.
694 2007-05-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
696 * format incremented to 275: add graphics params scaleBeforeRotation
699 2007-06-13 Dov Feldstern <dov@lyx.org>
700 * format incremented to 274: applying the conversion done in format 259
701 to the \lang property, which was forgotten back then... This is
702 slightly more complicated, because the default language has to be
703 determined on a per-paragraph basis.
705 2007-06-13 Bo Peng <ben.bob@gmail.com>
706 * format incremented to 273: add --Separator-- environment to
707 separate consecutive environments
709 2007-06-13 Bo Peng <bpeng@lyx.org>
710 * format incremented to 272: convert listings to ERT because
711 earlier versions of lyx can not handle unrecognizable
714 2007-05-15 José Matos <jamatos@lyx.org>
715 * format incremented to 271: extended textclasses accept the
716 normal font sizes: 10, 11 and 12pt.
718 2007-05-14 Martin Vermeer <martin.vermeer@tkk.fi>
719 * format incremented to 270: support beamer \alert, \structure
721 2007-05-08 Bo Peng <ben.bob@gmail.com>
722 * format incremented to 269: add listings support
723 - add preamble flag \listings_params, e.g. \listings_params "language=Python,float"
724 - add inset listings, with options lstparams and inline, e.g.
725 \begin_inset listings
726 lstparams "xleftmargin=50pt,language=Python"
728 - add \lstinputlisting Include type. e.g.
729 \begin_inset Include \lstinputlisting{newfile1.lyx}[firstline=10,lastline=15]
731 2007-05-06 Uwe Stöhr <uwestoehr@web.de>
733 * format incremented to 268: add support for the CJK encodings
734 - all encodings supported by CJK.sty are now in lib/encodings
735 - lib/encoding has got two new flags:
737 "inputenc" for those languages that use the inputenc-package and
738 "CJK" for the CJK encodings
739 - "fixed"/"variable" to divide between multi- or single-byte encoding
740 - lib/languages allows now to set an empty language for babel
741 in this case babel isn't called.
743 2007-05-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
745 * format incremented to 267: add plain utf8 encoding (for XeTeX).
747 2007-04-29 Uwe Stöhr <uwestoehr@web.de>
749 * format incremented to 266:
750 Support for the Armenian language
752 2007-04-26 Uwe Stöhr <uwestoehr@web.de>
754 * format incremented to 265: fix LyX's table border line handling
755 With the fix (see bug 1746) LyX now takes care if the user has entered
756 a "|" character in the argument field of tables. Therefore the "|"
757 character has to be removed when also a table border is set.
759 2007-04-24 José Matos <jamatos@lyx.org>
761 * format incremented to 264:
762 textclass cv is renamed simplecv
764 2007-02-22 José Matos <jamatos@lyx.org>
766 * format incremented to 263: changes in the language names (overdue):
768 portuges -> portuguese
770 2007-02-16 Georg Baum <Georg.Baum@post.rwth-aachen.de>
772 * format incremented to 262: Allow ascii \inputencoding
774 2007-02-14 Georg Baum <Georg.Baum@post.rwth-aachen.de>
776 * format incremented to 261: \output_changes is now considered
777 even if \tracking_changes is false. This allows to output existing
778 changes even if future changes are not tracked anymore.
781 \tracking_changes false
784 is therefore converted to
786 \tracking_changes false
787 \output_changes false
789 on upgrade. Nothing is done on downgrade since the new behaviour is
790 not supported in older formats.
792 2007-02-13 Georg Baum <Georg.Baum@post.rwth-aachen.de>
794 * format incremented to 260: Allow utf8x \inputencoding
796 2007-02-12 Georg Baum <Georg.Baum@post.rwth-aachen.de>
798 * format incremented to 259:
799 Old: Spaces at start or end of font changes were output outside of
800 the font change, i.e. not 'xx\textbf{ yy }zz', but
802 New: Spaces are always output with the font set by the user.
804 2007-01-31 Uwe Stöhr <uwestoehr@web.de>
806 * format incremented to 258: new \lyxline definition
808 \\newcommand{\\lyxline}[1]{
809 {#1 \\vspace{1ex} \\hrule width \\columnwidth \\vspace{1ex}}
812 \\newcommand{\\lyxline}[1][1pt]{%
814 \\rule[.5ex]{\\linewidth}{#1}\\par}
815 The new definition is more robust, see bug 1988 and now really takes care of
816 the fontsize: \lyxline{\Huge} produces now a thicker line than \lyxline{\normalfont}
818 2007-01-29 Georg Baum <Georg.Baum@post.rwth-aachen.de>
820 * format incremented to 257: Caption styles have been replaced by
821 InsetCaption. This is at the same time also a layout file format
822 change to format 3. layout2layout removes caption layouts from old
824 Note that InsetCaption did exist before this format, but was never
825 used. Old files containing do nevertheless still work.
826 Of course users can still define a Caption style in layout files,
827 but the special treatment in LyX is gone (apart from the sensitive
830 2006-12-22 Georg Baum <Georg.Baum@post.rwth-aachen.de>
832 * format incremented to 256: allow some new inputenc settings.
833 For the complete list, see lib/lyx2lyx/lyx_1_5.py.
835 2006-11-25 Georg Baum <Georg.Baum@post.rwth-aachen.de>
837 * format incremented to 255: new insets for \clearpage and
838 \cleardoublepage. They are written inline to the file, exactly like
841 2006-11-13 Georg Baum <Georg.Baum@post.rwth-aachen.de>
843 * format incremented to 254: new header parameter \use_esint.
844 It can have the same values as \use_amsmath: 0 (off), 1 (auto) and
847 2006-10-18 Georg Baum <Georg.Baum@post.rwth-aachen.de>
849 * format incremented to 253: new nomenclature and printnomenclature
850 insets. These are standard InsetCommand with the following parameters:
851 \nomenclature[prefix]{symbol}{description}
852 \printnomenclature[labelwidth]
854 2006-10-15 Georg Baum <Georg.Baum@post.rwth-aachen.de>
856 * format incremented to 252: changed command inset syntax
860 \begin_inset LatexCommand \cmdname[opt1][opt2]{arg}
871 \begin_inset LatexCommand cmdname
878 The order of the parameters and for each parameter the name and
879 optional/required bit is now stored in InsetCommandParams.
881 2006-10-03 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
883 * format incremented to 251: save show_label param for charstyles.
885 On revert, the show_label param is just removed. Nothing to convert.
887 2006-10-12 Martin Vermeer <martin.vermeer@hut.fi>
889 * Format incremented to 250: allow optional arg to environments
891 No material format change. Now optargs for environments are allowed
892 to be specified in layout files and will be handled properly. When
893 converted back to older formats, they will be ignored in LaTeX
896 2006-08-14 Georg Baum <Georg.Baum@post.rwth-aachen.de>
898 * format incremented to 249: Unicode
900 LyX documents are now always encoded in utf8. The value of
901 \inputencoding does now only determine the encoding of the created
903 Up to format 248 the value of \inputencoding did also determine the
904 encoding of the LyX file:
906 \inputencoding LyX file encoding
907 auto as determined by the document and character
910 everything else as determined by \inputencoding
912 The difference between auto and default is only the LaTeX output:
913 auto causes loading of the inputenc package, default does not.
915 2006-07-03 Georg Baum <Georg.Baum@post.rwth-aachen.de>
917 * format incremented to 248: Basic booktabs support
919 The <features> tag has a new switch: booktabs="true|false".
920 An absent switch is equivalent to booktabs="false".
921 Horizontal lines are set with the booktabs package if this switch
924 The <row> tag of tabulars has the following new attributes:
925 topspace, bottomspace and interlinespace. All take a LyXLength
926 as value, or the special keyword "default".
928 2006-06-10 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
930 * format incremented to 247. The Grand Font Interface Rewrite.
931 (1) Split font selection to rm, sf, tt:
932 \fontscheme -> \font_roman, \font_sans, \font_typewriter
934 \fontscheme \font_roman \font_sans \font_typewriter
935 default default default default
936 ae ae default default
937 times times default default
938 palatino palatino default default
939 helvet default helvet default
940 avant default avant default
941 newcent newcent default default
942 bookman bookman default default
943 pslatex times (or \usepackage{pslatex})
945 \font_roman: cmr (-> \renewcommand{\rmdefault}{cmr}),
946 lmodern, charter, utopia, ccfonts, chancery, beraserif
947 (-> \usepackage{<name>})
948 \font_sans: cmss, lmss, cmbr
949 (-> \renewcommand{\sfdefault}{<name>})
950 berasans (-> \usepackage{<name>})
951 \font_typewriter: cmtt, lmtt, cmtl,
952 (-> \renewcommand{\sfdefault}{<name>})
953 courier, luximono, beramono
954 (-> \usepackage{<name>})
955 (2) New param \font_default_family (rmdefault, sfdefault, ttdefault)
956 (3) New param \font_sc (true, false).
957 (4) New param \font_osf (true, false).
958 (5) New param \font_sf_scale (float)
959 (6) New param \font_tt_scale (float)
960 Support for the following fonts has been added:
961 bera, ccfonts, chancery, charter, cmbright, computer modern (explicitely),
962 courier, lmodern, luximono, utopia.
963 Support for the following font has been removed:
964 pslatex (it's superseded by mathptmx (times)).
966 2006-06-03 Martin Vermeer <martin.vermeer@hut.fi>
968 * format incremented to 246. The framed.sty package is
969 now supported with note types framed and shaded.
971 2005-10-12 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
973 * format incremented to 245. The \quotes_times parameter
976 2005-09-24 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
978 * format incremented to 244. Rename '\InsetSpace \,'
979 to '\InsetSpace \thinspace{}', because the comma was
980 not parsed by lyxlex, and '\InsetSpace \space' to
981 '\InsetSpace \space{}' in favour of consistency.
983 2005-07-18 José Matos <jamatos@lyx.org>
985 * format incremented to 243.
987 * this change only affects the preamble, the paperpackage
988 option was removed and papersize is changed to default.
990 2005-06-21 Jean-Marc Lasgouttes <lasgouttes@lyx.org>
992 * format incremented to 242. There is no file format per
993 se, but the "frenchb" language has been removed from lib/language
994 and has to be translated to "french" by lyx2lyx.
996 2005-02-03 Georg Baum <Georg.Baum@post.rwth-aachen.de>
998 * format incremented to 241.
1000 All following changes apply only to text in ERT insets. The
1001 rationale is that text in ERT is simply ASCII text, and nothing more.
1003 * paragraph breaks are now a single newline in latex and not a
1004 paragraph break anymore (bug 698).
1005 * \newline is not allowed anymore, because it is redundant (see above)
1006 * layouts other than Standard, paragraph parameters and font changes
1007 are not allowed anymore. They never made sense and were ignored for
1008 latex output, but now they can't be read or set anymore (bug 922).
1011 2005-01-23 Jürgen Spitzmüller <j.spitzmüller@gmx.de>
1013 * format incremented to 240.
1015 \output_changes {true|false}
1016 (should the change tracking marks be visible in the output or not?)
1017 * lyx2lyx should just delete the param in 239.
1019 2005-01-06 José Matos <jamatos@lyx.org>
1021 * format incremented to 239.
1022 * the paragraph parameters are displayed in their own line. This
1023 change is consistent with the insets behaviour, and corresponds
1024 to a more uniform treatment of the paragraphs since some of them
1025 had already their own line.
1027 An example of a single paragraph follows:
1029 \begin_layout Standard
1030 \paragraph_spacing single
1036 2004-12-03 José Matos <jamatos@lyx.org>
1038 * format incremented to 238.
1039 * The compatibility code to read old latex accents from 0.12.x in
1040 InsetLatexAccent::checkContents has been removed.
1041 The following translations are done:
1042 "\i \x" -> "\i \x{}"
1043 "\i \xy" -> "\i \x{y}"
1044 "\i \x y" -> "\i \x{y}"
1045 "\i \x\i" -> "\i \x{\i}"
1046 "\i \x\j" -> "\i \x{\j}"
1047 x is a latex accent command, y the base character. \, i and j are
1049 lyx did these changes already from 0.12.x -> 215, but not lyx2lyx,
1050 so formats 215 - 237 can have both versions.
1053 2004-10-10 José Matos <jamatos@lyx.org>
1055 * format incremented to 237.
1056 * In the header, the following statments use now booleans values,
1062 2004-08-15 José Matos <jamatos@lyx.org>
1064 * format incremented to 236.
1071 * The options for \papersize are changed:
1074 * All whitespaces are removed at the end of lines, when
1075 not necessary. As an example we have all the lines in the header that
1076 do not belong to the preamble.
1078 2004-07-01 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1080 * format incremented to 235.
1081 * \paperpackage had an off-by-one error. Translation table:
1083 234: a4 a4wide widemarginsa4
1084 235: none a4 a4wide widemarginsa4
1086 The "widemarginsa4" setting of 235 has no equivalent in 234.
1088 2004-05-12 Angus Leeming <leeming@lyx.org>
1090 * format incremented to 234.
1091 * the citation engine is specified explicitly rather than being
1092 deduced from 3 bools.
1095 \use_numerical_citations 0 -> \cite_engine <style>
1098 where <style> is one of "basic", "natbib_authoryear",
1099 "natbib_numerical" or "jurabib".
1101 2004-04-29 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1103 * format incremented to 233.
1104 * insetgraphics does not allow filenames without extension anymore.
1105 The complete filename has to be given.
1107 2004-03-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1109 * format incremented to 232.
1111 * Support for bibtopic (sectioned bibliographies).
1112 - bufferparam \use_bibtopic [1|0]
1113 - the bibtex inset has a second argument for bibtopic's
1114 btPrint{Cited|NotCited|All} command:
1116 \begin_inset LatexCommand \bibtex[<style>]{<database>}
1118 \begin_inset LatexCommand \bibtex[<style>][<btPrintX>]{<database>}
1119 Forwards, there's nothing to be done. Backwards, \usepackage[dot]{bibtopic}
1120 has to be inserted to the preamble. Instead of the bibtex inset, the LaTeX
1121 \bibliographystyle{<style>}
1122 \begin{btSect}{<database>}
1127 2004-03-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1129 * format incremented to 231.
1131 * Support for sidewaysfigure/sidewaystable (rotating package).
1132 insetfloat has now a param \sideways [true|false] (default is false).
1133 The param should be erased on downwards conversion, if it was true,
1134 the inset should be replaced by
1135 \begin{sidewaysfigure} <content> \end{sidewaysfigure}
1137 \begin{sidewaystable} <content> \end{sidewaystable}
1140 2004-02-23 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1142 * format incremented to 230.
1144 * Support for a second optional argument in insetcommand.
1145 currently, citation uses this to support natbibs second
1146 optional argument \cite[before][after]{key}.
1147 I think there's nothing to convert upwards. Downwards, the
1148 commands with 2 optional args need to be converted to ERT.
1150 * Support for jurabib (param \use_jurabib [1|0], default is 0).
1151 When converting downwards, \usepackage{jurabib} has to be added
1152 to the preamble and, if babel is used, \usepackage{babel} before
1153 (jurabib fails if babel is called afterwards). If the natbib commands
1154 are used together with jurabib, they have to be converted to ERT too.
1156 2003-12-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1158 * format incremented to 229.
1159 * Minipages cannot be read anymore. All minipage insets will
1160 be converted to frameless box insets between 228->229.
1162 2003-12-15 Angus Leeming <leeming@lyx.org>
1164 * format incremented to 228.
1165 * Change the output of all insets derived from InsetCollapsable
1166 except for InsetERT (which has a similar output already), changing lines
1167 "collapsed true" -> "status collapsed"
1168 "collapsed false" -> "status open".
1169 * Change the output of InsetERT, changing lines
1170 "status Collapsed" -> "status collapsed"
1171 "status Open" -> "status open".
1172 "status Inlined" -> "status inlined".
1174 2003-12-10 Angus Leeming <leeming@lyx.org>
1176 * format NOT incremented.
1177 * add a 'draft' option to InsetExternal.
1179 2003-12-10 Angus Leeming <leeming@lyx.org>
1181 * format incremented to 227.
1182 * Change the output of InsetBox:
1183 \begin_inset Boxed -> \begin_inset Box Boxed
1184 \begin_inset Doublebox -> \begin_inset Box Doublebox
1185 \begin_inset Frameless -> \begin_inset Box Frameless
1186 \begin_inset ovalbox -> \begin_inset Box ovalbox
1187 \begin_inset Ovalbox -> \begin_inset Box Ovalbox
1188 \begin_inset Shadowbox -> \begin_inset Box Shadowbox
1190 2003-12-10 Angus Leeming <leeming@lyx.org>
1192 * format incremented to 226.
1193 * Change the output of InsetNote:
1194 \begin_inset Note -> \begin_inset Note Note
1195 \begin_inset Comment -> \begin_inset Note Comment
1196 \begin_inset Greyedout -> \begin_inset Note Greyedout
1198 2003-11-28 André Pönitz
1200 * Remove space_above/space_below from Paragraph.
1201 This is now handled by InsetVSpace.
1203 2003-10-07 Angus Leeming <leeming@lyx.org>
1205 * Add transformations to InsetExternal
1207 boundingBox 0 0 20 20 the dimensions of the B.B..
1208 Output if the B.B. is not empty.
1209 clip clip the image to the B.B.
1211 extra LaTeX "draft" 'extra' data passed to the primary
1212 command for this output format.
1213 (Possible formats LaTeX, PDFLaTeX,
1214 LinuxDoc, DocBook, Ascii.)
1215 The string can contain spaces and so
1216 is wrapped in "...".
1217 rotateAngle 30 Rotation of the data.
1218 Output for non-zero rotation only.
1219 rotateOrigin bottomleft Rotation origin.
1220 Output for non-zero rotation and
1221 non-default origin (center) only.
1223 width 2cm Output only if the image is resized.
1227 2003-10-07 Martin Vermeer <martin.vermeer@hut.fi>
1229 * Added box inset. File format:
1231 \begin_inset Ovalbox Boxed/Frameless/ovalbox/Ovalbox
1232 /Shadowbox/Doublebox
1236 inner_pos "b" t/c/b/s
1238 width "100col%" unit+width-string
1239 special "none" none/height/depth
1241 height "1in" unit+width-string
1242 height_special "totalheight" none/height/depth
1244 collapsed false true/false
1246 \begin_layout Standard
1253 This box (Frameless, has_inner_box=1, use_parbox=0) replaces
1254 the pre-existing Minipage inset. Parameters translate as follows:
1255 position 0/1/2 -> t/c/b
1256 inner_position 0/1/2/3 -> inner_pos c/t/b/s
1261 2003-08-19 Michael Schmitt <michael.schmitt@teststep.org>
1263 * attribute valignment="center" is replaced by valignment="middle"
1264 for tabular columns and cells
1266 2003-08-17 Martin Vermeer <martin.vermeer@hut.fi>
1268 * Added branch inset. File format:
1270 branch definition in the header:
1271 \branch <branchname>
1276 \begin_inset Branch <branchname>
1277 collapsed false true/false
1279 \begin_layout Standard
1286 2003-07-28 José Matos <jamatos@lyx.org>
1288 * \the_end is replaced with \end_document
1290 2003-07-28 José Matos <jamatos@lyx.org>
1292 * \layout is replaced with \begin_layout
1294 2003-07-28 José Matos <jamatos@fep.up.pt>
1296 Format bumped to 225
1298 * All layouts finish now with \end_layout
1300 2003-06-04 Angus Leeming <leeming@lyx.org>
1302 Format bumped to 224
1304 * the storage of the external inset has been changed from
1306 \begin_inset External XFig,"file.fig",""
1312 \begin_inset External
1315 display <display_type>
1320 throwing away the final arg (here "", more generally "<string>") that holds
1321 the parameters variable.
1322 Variables are output if present (filename) or different from the default
1323 values (display, lyxscale).
1325 Moreover, the RasterImage template has been scrapped. All RasterImage
1326 external insets are now converted to Graphics insets.
1328 2003-05-20 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1330 * Added new space insets:
1331 \SpecialChar ~ is now \InsetSpace ~
1332 ERT: "\ " could be converted to InsetSpace \<space>
1333 ERT: "\," could be converted to InsetSpace \,
1335 2003-04-24 André Pönitz <poenitz@gmx.net>
1337 * Added eqref support:
1338 \begin_inset LatexCommand \eqref{label}
1340 2003-03-14 Dekel Tsur
1342 * Format bumped to 223.
1344 2003-03-12 John Levon <levon@movementarian.org>
1346 * Added \\end_header to signify the end of the header in a
1347 more robust fashion.
1349 * use_amsmath is now a tristate {0 = never, 1 = auto, 2 = always}
1351 2003-02-10 John Levon <levon@movementarian.org>
1353 Format bumped to 222
1355 Added \\tracking_changes 0|1 to the header.
1357 Added \\author to the header. This can be present multiple
1358 times, and is of the form :
1360 \\author "Real Name" email@address.com
1362 Added \\change_deleted, \\change_inserted. Each of these does not
1363 span a paragraph, and is delimited by "\\change_unchanged\n". Both are
1366 \\change_inserted author time
1368 where author is an integer ID reference into the author list in
1369 the header, and time is time_t.
1371 2002-10-24 Rob Lahaye <lahaye@snu.ac.kr>
1373 * InsetGraphicsParams.h (scale): is now a float, not an unsigned int.
1375 2002-08-22 Rob Lahaye <lahaye@snu.ac.kr>
1377 New graphics dialog. With the removal of buttons in the dialog, also
1378 keywords in the graphics inset went. The following keywords do not
1388 Only non-default values are saved to the lyx files. The defaults of the remaining
1398 BoundingBox <from file>
1401 rotateOrigin centerBaseline
1403 subcaptionText <empty>
1406 The remaining keywords have sufficient overlap with the old ones for a
1407 smooth reading of the 1.2.x inset keywords in most common cases.
1409 Compatibility is certainly broken for the old lyxwidth/lyxheight keywords.
1410 They don't exist anymore and we can't translate them into a scaling value, while
1411 we're reading the graphics inset. The old lyxwidth/lyxheight keyword and its
1412 argument is ignored and lost.
1414 Only few compatibility issues are left for lyx2lyx:
1416 ------------------------------------------------------------------------------
1417 old-token new-token remove
1418 ------------------------------------------------------------------------------
1419 size_kind original / size_type 0 scale 100 width <val>
1423 size_kind width_height / size_type 1 - scale <val>
1425 lyxsize_kind original / lyxsize_type 0 lyxscale 100 lyxscale <val>
1426 ------------------------------------------------------------------------------
1427 [replace old-token by new-token, and remove any of subsequent tokens as listed]
1429 If "rotate" is absent, lyx2lyx should ignore "rotateAngle <val>":
1430 if ( "rotateAngle <val>" is there WITHOUT being preceded by the keyword "rotate" )
1432 replace "rotateAngle <val>" by "rotateAngle 0"
1435 2002-08-12 Andre' Poenitz <poenitz@gmx.de>
1437 Added \lyxlock for locked math inset when written to .lyx file.
1438 When "downgrading" .lyx files this should simple be deleted but it
1439 does not hurt at all if it stays in. It does not have to be added
1443 2002-08-02 Angus Leeming <leeming@lyx.org>
1445 Added a boolean "preview" flag to InsetCommandParams.
1446 Currently it is written only by InsetInclude, because only this
1447 class can generate a preview of its contents.
1449 The LyX file now contains:
1451 \begin_inset Include \input{snapshot_t=40.tex}
1456 Earlier versions of LyX just swallow this extra token silently.
1458 2002-08-12 Angus Leeming <leeming@lyx.org>
1460 The 1.2.0 InsetGraphicsParams "size_type" and "lyxsize_type" have been
1461 renamed as "size_kind" and "lyxsize_kind" respectively.
1463 \begin_inset Graphics FormatVersion 1
1466 - size_kind original
1467 + size_type original
1470 - lyxsize_kind original
1471 + lyxsize_type original