1 LyX file-format changes
2 -----------------------
4 Please keep the entries informative enough, i.e. try to indicate what
5 changes happened in particular if possible. A good example would be
8 Please also indicate the revision at which your change was committed.
9 This will help later people understand what you did, especially as
10 adjustments are made to tex2lyx and bugs are fixed in lyx2lyx.
12 -----------------------
14 2013-03-16 Jürgen Spitzmüller <spitz@lyx.org>
15 * Format incremented to 465: Convert old beamer frames to new ones.
16 The layouts BeginFrame, BeginPlainFrame and EndFrame are now not
17 valied anymore (use "Frame", "PlainFrame" instead, and nesting).
19 2013-02-27 Kornel Benko <kornel@lyx.org>
20 * Format incremented to 464:
21 - Added "cancel" to the GUI handled list of LaTeX packages
23 2013-02-18 Julien Rioux <jrioux@lyx.org>
24 * Format incremented to 463:
25 - Use the LyX name of encodings instead of the LaTeX names.
26 The LyX name must be unique, while the name used by LaTeX
27 not necessarily, e.g. different packages might implement
28 support for the same encoding.
29 - Add utf8-platex encoding.
31 2013-02-15 Jürgen Spitzmüller <spitz@lyx.org>
32 * Format incremented to 462: Support for recent libertine LaTeX fonts
33 a.) Support Libertine Mono:
34 \usepackage[scaled=$val]{libertineMono-type1}
35 => \font_typewriter libertine-mono
36 b.) Support Biolinum scaling:
37 \usepackage[scaled=$val]{biolinum-type1}
38 => \font_sans biolinum
40 2013-02-11 Uwe Stöhr <uwestoehr@web.de>
41 * Format incremented to 461: support for kurier fonts
42 new supported sansserif fonts "kurier", "kurierl", "kurierc"
43 and "kurierlc" and the math font "kurier-math"
45 2013-02-09 Uwe Stöhr <uwestoehr@web.de>
46 * Format incremented to 460: support for IEEE conference articles
47 No changes in the file format
48 This format change was added for the lyx2lyx conversion
50 2012-12-31 Jürgen Spitzmüller <spitz@lyx.org>
51 * Format incremented to 459: Introduce new beamer frames:
52 Frame, PlainFrame, FragileFrame (LaTeX: \begin{frame},
53 \begin{frame}[plain], \begin{frame}[fragile]). These will
54 eventually replace the old BeginFrame, BeginPlainFrame, which
57 2012-12-30 Jürgen Spitzmüller <spitz@lyx.org>
58 * Format incremented to 458: Extended caption inset support.
59 Former special caption layouts (e.g. of KOMA) are now proper caption
62 2012-12-28 Georg Baum <Georg.Baum@post.rwth-aachen.de>
63 * Format incremented to 457
64 support for the LaTeX-package stackrel (fix bug 8464)
65 New buffer param \use_package stackrel
67 2012-12-28 Jürgen Spitzmüller <spitz@lyx.org>
68 * Format incremented to 456: Proper support for memoir \epigraph
69 \epigraph{text}{source} > begin_layout Epigraph, <source> as
72 2012-12-22 Jürgen Spitzmüller <spitz@lyx.org>
73 * Format incremented to 455: Support for beamer \frametitle
74 \frametitle<overlay>[short]{title} > begin_layout FrameTitle
76 2012-12-19 Jürgen Spitzmüller <spitz@lyx.org>
77 * Format incremented to 454:
78 Real support for beamer overprint environment. This environment has a
79 list structure (with \onslide item commands). Previously, we just output
80 the begin/end tags, which was rather useless. Since the syntax is so
81 different, the old overprint layouts are converted to ERT, likewise the
84 2012-12-15 Georg Baum <Georg.Baum@post.rwth-aachen.de>
85 * Format incremented to 453
86 support for the LaTeX-package stmaryrd (fix bug 8434)
87 New buffer param \use_package stmaryrd
89 2012-12-09 Jürgen Spitzmüller <spitz@lyx.org>
90 * Format incremented to 452: Support for beamer block arguments:
91 \begin{block}<overlay>{title}
93 * Format incremented to 451: Native support for beamer action/overlay arguments.
94 \command<overlay> => \begin_inset Argument 1
96 2012-12-04 Jürgen Spitzmüller <spitz@lyx.org>
97 * Format incremented to 450: Support for the URW Garamond LaTeX fonts.
98 - \usepackage{garamondx} > \font_serif garamondx
99 - [osf], [osfI] > \font_osf true
100 - \usepackage[garamondx]{newtxmath} > \font_math garamondx-ntxm
102 - \renewcommand{\sffamily}{ugm} > \font_serif garamondx
104 2012-11-29 Jürgen Spitzmüller <spitz@lyx.org>
105 * Format incremented to 449: Support for \item arguments.
106 Item arguments have the prefix "item:" and a number determining
108 \begin_inset Argument item:1
113 2012-11-25 Kayvan Sylvan <kayvan@sylvan.com>
114 * Format incremented to 448: Change Noweb literate style Scrap
115 to Chunk to be consistent with all the other literate tools
116 (including noweb!) and add the needed preamble bits to Noweb
117 module support, also remove the literate-* layouts.
119 2012-11-24 Uwe Stöhr <uwestoehr@web.de>
120 * Format incremented to 447: No changes in the file format
121 This format change was added to force the lyx2lyx conversion
122 for layout files using the new InsetArgument feature.
123 (see previous fileformat change 446)
125 2012-11-19 Jürgen Spitzmüller <spitz@lyx.org>
126 * Format incremented to 446: Change of InsetArgument syntax.
127 InsetArgument now has a numeric identifier which determines
128 its position (in the LaTeX output):
129 \begin_inset Argument 1
132 Pre-2.1 documents' arguments all get the number "999", and then
133 InsetArgument::updateBuffer() computes the correct number.
134 This is because lyx2lyx has no access to layouts and hence does
135 not know how many optional arguments a layout can have (if a command
136 has two optional and one mandatory arguments and only one optional
137 is actually given, the mandatory arg still must get number 3).
139 2012-10-20 Liviu Andronic <landronimirc@gmail.com>
140 * Format incremented to 445: support for the URW Classico font,
142 - \renewcommand{\sffamily}{uop} > \font_sans uop
144 2012-09-25 Jürgen Spitzmüller <spitz@lyx.org>
145 * Format incremented to 444: Support for the Biolinum LaTeX font.
146 - \usepackage{biolinum-type1} > \font_sans biolinum
147 - [lf], [lining] > \font_osf false
148 - [osf], [oldstyle], no option > \font_osf true
149 - \usepackage{libertine-legacy} or
150 \usepackage{libertine} > \font_sans biolinum
151 - [nf], no option > \font_osf false
152 - [osf] > \font_osf true
154 2012-09-24 Jürgen Spitzmüller <spitz@lyx.org>
155 * Format incremented to 443: basic support for unicode-math:
156 Empty file format change (in case it turns out we need to
159 2012-09-23 Jürgen Spitzmüller <spitz@lyx.org>
160 * Format incremented to 442: support for the newtxmath fonts:
161 - \usepackage{newtxmath} > \font_math newtxmath
162 - \usepackage[libertine]{newtxmath} > \font_math libertine-ntxm
163 - \usepackage[minion]{newtxmath} > \font_math minion-ntxm
165 2012-09-23 Jürgen Spitzmüller <spitz@lyx.org>
166 * Format incremented to 441:
167 - rename fonts: mdbch > md-charter, mdput > md-utopia, mdugm > md-garamond
168 - add support for the mathdesign fonts without loading mathfonts:
169 \renewcommand{\rmfamily}{mdbch} > \font_roman md-charter
171 \renewcommand{\rmfamily}{mdput} > \font_roman md-utopia
173 \renewcommand{\rmfamily}{mdugm} > \font_roman md-garamond
176 2012-09-22 Jürgen Spitzmüller <spitz@lyx.org>
177 * Format incremented to 440:
179 New Buffer param "\font_math <value>",
180 supported values are:
181 * "auto": automatically adapt math font (the status quo ante).
182 * "default": use class default, i.e. prevent TeX font packages
183 from changing the math font, if possible:
184 \renewcommand{\rmdefault}{lmr} > \font_roman lmodern
186 \usepackage[onlytext,lf]{MinionPro} > \font_roman minionpro
188 \usepackage[onlytext]{MinionPro} > \font_roman minionpro
191 \renewcommand{\rmdefault}{ppl} > \font_roman palatino
193 \renewcommand{\rmdefault}{pplj} > \font_roman palatino
196 \renewcommand{\rmdefault}{ptm} > \font_roman times
198 \renewcommand{\rmdefault}{futs} > \font_roman utopia
200 \renewcommand{\rmdefault}{futj} > \font_roman utopia
203 * "eulervm": use the eulervm package (\usepackage{eulervm}.
205 2012-09-19 Jürgen Spitzmüller <spitz@lyx.org>
206 * Format incremented to 439
207 Support for the MinionPro LaTeX font.
208 - \usepackage{MinionPro} > \font_roman minionpro
209 - [osf], [oldstyle], no option > \font_osf true
210 - [lf], [lining] > \font_osf false
212 2012-08-23 Jürgen Spitzmüller <spitz@lyx.org>
213 * Format incremented to 438
214 Support for some IPA macros that are not unicoded.
215 (1) tone symbols from tipa's "tone" subpackage:
216 -- \tone{51} => \IPAChar \tone{51}
217 -- \tone{15} => \IPAChar \tone{15}
218 -- \tone{45} => \IPAChar \tone{45}
219 -- \tone{12} => \IPAChar \tone{12}
220 -- \tone{454} => \IPAChar \tone{454}
222 -- \toptiebar{<content>} =>
223 \begin_inset IPADeco toptiebar
226 \begin_layout Plain Layout
231 -- \bottomtiebar{<content>} =>
232 \begin_inset IPADeco bottomtiebar
235 \begin_layout Plain Layout
241 2012-08-19 Jürgen Spitzmüller <spitz@lyx.org>
242 * Format incremented to 437
243 Support for the TeX Gyre LaTeX fonts.
244 - \usepackage{tgadventor} > \font_sans tgadventor
245 - \usepackage{tgbonum} > \font_roman tgbonum
246 - \usepackage{tgchorus} > \font_roman tgchorus
247 - \usepackage{tgcursor} > \font_typewriter tgcursor
248 - \usepackage{tgheros} > \font_sans tgheros
249 - \usepackage{tgpagella} > \font_roman tgpagella
250 - \usepackage{tgschola} > \font_roman tgschola
251 - \usepackage{tgtermes} > \font_roman tgtermes
253 2012-08-18 Jürgen Spitzmüller <spitz@lyx.org>
254 * Format incremented to 436
255 Support for the mathdesign LaTeX fonts.
256 - \usepackage[mdbch]{mathdesign} > \font_roman md-charter
257 - \usepackage[mdput]{mathdesign} > \font_roman md-utopia
258 - \usepackage[mdugm]{mathdesign} > \font_roman md-garamond
260 2012-08-17 Jürgen Spitzmüller <spitz@lyx.org>
261 * Format incremented to 435
262 Support for the txtt LaTeX font.
263 - \renewcommand{\ttdefault}{txtt} > \font_typewriter txtt
265 2012-08-17 Jürgen Spitzmüller <spitz@lyx.org>
266 * Format incremented to 434
267 Support for the libertine LaTeX font.
268 - \usepackage{libertine-type1} > \font_roman libertine
269 - [lf], [lining] > \font_osf false
270 - [osf], [oldstyle], no option > \font_osf true
271 - \usepackage{libertine-legacy} or
272 \usepackage{libertine} > \font_roman libertine
273 - [nf], no option > \font_osf false
274 - [osf] > \font_osf true
276 2012-06-22 Uwe Stöhr <uwestoehr@web.de>
277 * Format incremented to 433
278 switch the Armenian language support from ArmTeX to XeTeX/polyglossia
280 2012-06-08 Uwe Stöhr <uwestoehr@web.de>
281 * Format incremented to 432
282 support for the document languages ancientgreek, coptic, divehi, hindi,
283 kurmanji, lao, marathi, occitan, sanskrit, syriac, tamil, telugu and urdu
285 2012-05-06 Georg Baum <Georg.Baum@post.rwth-aachen.de>
286 * Format incremented to 431
287 Add \use_package amssymb
289 2012-04-16 Georg Baum <Georg.Baum@post.rwth-aachen.de>
290 * Format incremented to 430
291 Support \lstlistoflistings in InsetTOC
293 2012-03-21 Uwe Stöhr <uwestoehr@web.de>
294 * Format incremented to 429
295 support for table rotation
296 (table option "rotate" specifies now a number with the rotation angle)
298 2012-03-16 Uwe Stöhr <uwestoehr@web.de>
299 * Format incremented to 428
300 support for table cell rotation
301 (table cell option "rotate" specifies now a number with the rotation angle)
303 2012-03-06 Jürgen Spitzmüller <spitz@lyx.org>
304 * Format incremented to 427
305 Add native TIPA inset.
307 2012-02-20 Uwe Stöhr <uwestoehr@web.de>
308 * Format incremented to 426 (r40784)
309 support for the verbatim environment
310 (added only a layout)
312 2012-01-23 Uwe Stöhr <uwestoehr@web.de>
313 * Format incremented to 425 (r40663)
314 support for the LaTeX-package cancel (fix bug 6819)
316 2012-01-09 Julien Rioux <jrioux@lyx.org>
317 * Format incremented to 424 (r40592)
318 New buffer param \cite_engine_type to specify the type of
319 citation labels being used, authoryear or numerical.
321 2012-01-05 Georg Baum <Georg.Baum@post.rwth-aachen.de>
322 * Format incremented to 423 (r40574)
323 support for the LaTeX-package mathtools (fix bug 7949)
324 New buffer param \use_package mathtools
326 2012-01-03 Georg Baum <Georg.Baum@post.rwth-aachen.de>
327 * Format incremented to 422 (r40563)
328 \use_amsmath 0/1/2 => \use_package amsmath 0/1/2
329 \use_esint 0/1/2 => \use_package esint 0/1/2
330 \use_mhchem 0/1/2 => \use_package mhchem 0/1/2
331 \use_mathdots 0/1/2 => \use_package mathdots 0/1/2
332 \use_undertilde 0/1/2 => \use_package undertilde 0/1/2
334 2011-12-18 Georg Baum <Georg.Baum@post.rwth-aachen.de>
335 * Format incremented to 421 (r40522)
336 The caption flag of longtable rows is no longer exclusive to the head
337 and foot flags, since captions can occur in any of the two heads and
338 two foots. Before, captions were implicitly in head or firsthead.
339 For Docbook and XHTML output the caption flag "wins" over head/foot.
341 2011-12-12 Julien Rioux <jrioux@lyx.org>
342 * Format incremented to 420 (r40484)
343 New buffer param \biblio_style to specify a document-wide
344 default bibliography style (BibTeX style for the moment).
346 2011-12-09 Uwe Stöhr <uwestoehr@web.de>
347 * Format incremented to 419 (r40452)
348 support for the document languages australian and newzealand
350 2011-12-08 Richard Heck <rgheck@lyx.org>
351 * Format incremented to 418 (r40427)
352 Introduce justification preference.
354 2011-11-07 Julien Rioux <jrioux@lyx.org>
355 * Format incremented to 417 (r39982 and r40155)
356 Rename the japanese encodings to names understood by pLaTeX.
358 2011-08-29 Uwe Stöhr <uwestoehr@web.de>
359 * Format incremented to 416 (r39557)
360 support for \negmedspace and \negthinspace outside of math
361 support for \hfill, \enspace, \hspace* and \hspace*{\fill} in math
362 No new InsetSpace parameters
364 2011-07-30 Uwe Stöhr <uwestoehr@web.de>
365 * Format incremented to 415 (r39464)
366 support for the LaTeX-package undertilde (fix bug 6622)
367 New buffer param \use_undertilde
369 2011-07-02 Pavel Sanda <sanda@lyx.org>
370 * Format incremented to 414 (r39367)
371 New InsetSpace param \textvisiblespace
373 2011-02-15 Richard Heck <rgheck@comcast.net>
374 * Format incremented to 413 (r37682)
375 New buffer param \html_css_as_file to control whether
376 CSS is output to header to to style file
378 2011-02-03 Edwin Leuven <e.leuven@gmail.com>
379 * Format incremented to 412 (r37471)
380 Support tabular* : add tabularwidth parameter to
383 2011-02-03 Jürgen Spitzmüller <spitz@lyx.org>
384 * Format incremented to 411
385 New buffer param \language_package to allow per-document
386 language package selection (bug 2909).
388 2010-11-26 Richard Heck <rgheck@comcast.net>
389 * Format incremented to 410 (r36520)
390 Rename "\\begin_layout Labeling" to "\\begin_layout List"
391 in the KOMA (scr*) classes.
393 2010-11-26 Jürgen Spitzmüller <spitz@lyx.org>
394 * Format incremented to 409 (r36500)
395 Rename buffer param \use_xetex to \use_non_tex_fonts.
397 2010-11-21 Georg Baum <Georg.Baum@post.rwth-aachen.de>
398 * Format incremented to 408 (r36424)
399 New inset for sub/superscripts:
403 2010-11-07 Uwe Stöhr <uwestoehr@web.de>
404 * Format incremented to 407 (r36182)
405 Support for vertical offset of multirow cells.
406 New tag "mroffset" for multirow cells with an offset.
408 2010-11-06 Jean-Marc Lasgouttes <lasgouttes@lyx.org>
409 * Format incremented to 406 (r36163)
410 Proper ERT behaviour for normal layouts. Paragraph breaks
411 generate single \n in latex output when ParbreakIsNewline
414 2010-10-23 Vincent van Ravesteijn <vfr@lyx.org>
415 * Format incremented to 405 (r36134)
417 The authors that are used in change tracking are
418 now identified in the file by a number that represents
419 the hash value of the name and email. In this way
420 collaboration using version control leads to way less
423 2010-10-13 Richard Heck <rgheck@comcast.net>
424 * Format incremented to 404 (r35623)
425 Support for refstyle package.
426 Changed the LaTeXCommand for InsetRef from "prettyref"
427 to "formatted", where "formatted" is now interprted
428 differently, depending upon whether the new buffer param
429 use_refstyle is true or false.
431 2010-10-12 Richard Heck <rgheck@comcast.net>
432 * Format incremented to 403 (r35608)
433 Renaming of flex insets.
435 \begin_inset Flex TAG:Style
437 \begin_inset Flex Style
438 where TAG is Custom, CharStyle, or Element
440 2010-10-11 Uwe Stöhr <uwestoehr@web.de>
441 * Format incremented to 402 (r35590)
442 No new or removed parameter, used to insert a
443 clear(double)page before BibTeX inset.
445 2010-09-19 Ronen Abravanel <ronena@gmail.com>
446 * Format incremented to 401 (r35455)
447 Support for Feynman diagrams
448 New math command \Diagram
450 2010-09-07 Uwe Stöhr <uwestoehr@web.de>
451 * Format incremented to 400 (r35299)
452 Support for the LaTeX-command \rule.
453 New CommandInset "line".
455 2010-08-31 Uwe Stöhr <uwestoehr@web.de>
456 * Format incremented to 399 (r35241)
457 Support for the LaTeX-package mathdots.
458 New parameter \use_mathdots.
460 2010-07-17 Uwe Stöhr <uwestoehr@web.de>
461 * Format incremented to 398 (r34941)
463 No new parameter but the mathrsfs package will be loaded.
465 2010-07-16 Richard Heck <rgheck@comcast.net>
466 * Format incremented to 397 (r34920)
467 Remove Nameref support
469 2010-07-13 Richard Heck <rgheck@comcast.net>
470 * Format incremented to 396 (r34884)
472 new commands nameref and Nameref for InsetRef
474 2010-07-13 Uwe Stöhr <uwestoehr@web.de>
475 * Format incremented to 395 (r34883)
476 Support for ISO C-series paper format.
477 New parameter \papersize cxpaper with (x = 0 - 6).
479 2010-07-03 Uwe Stöhr <uwestoehr@web.de>
480 * Format incremented to 394 (r34748)
482 New box parameter \use_makebox.
484 2010-06-07 Richard Heck <rgheck@comcast.net>
485 * Format incremented to 393 (r34619)
486 Renaming in LyX format: \begin_inset OptArg becomes
487 \begin_inset Argument.
489 2010-06-07 Richard Heck <rgheck@comcast.net>
490 * Format incremented to 392 (r34615)
491 Dummy format change permitting Beamer files to be converted to
492 a new, more useful format.
494 2010-06-05 Edwin Leuven <e.leuven@uva.nl>
495 * Format incremented to 391 (r34598)
496 Added support for decimal alignment in tables.
498 2010-05-25 Pavel Sanda <sanda@lyx.org>
499 * Format incremented to 390: support for ouput sync (forward/reverse)
500 search. New boolean \forward_search and string \forward_macro.
502 2010-05-24 Richard Heck <rgheck@comcast.net>
503 * Format incremented to 389: remove quotes from html_latex_* params.
505 2010-05-18 Uwe Stöhr <uwestoehr@web.de>
506 * Format incremented to 388: support for page sizes A0-3, A6, B0-3, B6
509 2010-04-21 Richard heck <rgheck@comcast.net>
510 * Format incremented to 387: New options for XHTML math output.
511 New BufferParams: html_math_img_scale, html_latex_start,
514 2010-04-17 Richard heck <rgheck@comcast.net>
515 * Format incremented to 386: LyX version for InsetInfo:
516 new parameters: type "lyxinfo", arg "version".
518 2010-04-08 Uwe Stöhr <uwestoehr@web.de>
519 * Format incremented to 385: support to change the background color
520 for shaded boxes: new buffer parameter \boxbgcolor
522 2010-04-03 Uwe Stöhr <uwestoehr@web.de>
523 * Format incremented to 384: support to specify a document-wide
524 font color: new buffer parameter \fontcolor
526 2010-03-31 Uwe Stöhr <uwestoehr@web.de>
527 * Format incremented to 383: support for Turkmen
529 2010-03-31 Uwe Stöhr <uwestoehr@web.de>
530 * Format incremented to 382: support to change the font color
531 for greyed-out notes: new buffer parameter \notefontcolor
533 2010-03-28: Vincent van Ravesteijn <vfr@lyx.org>
534 * Format incremented to 381: support for new parameters
535 for \xymatrix: \xymatrix@!0, \xymatrix!R and \xymatrix!C.
537 2010-03-28: Vincent van Ravesteijn <vfr@lyx.org>
538 * Format incremented to 380: introduction of InsetPreview.
540 2010-03-18: Richard Heck <rgheck@comcast.net>
541 * Format incremented to 379: revise format 374
542 Replace boolean \html_use_mathml with \html_math_output,
543 which at the moment can be: MathML, HTML, Images, or LaTeX.
545 2010-02-12 Pavel Sanda <sanda@lyx.org>
546 * Format incremented to 378: support for revision InsetInfo.
547 Various "vcs-*" strings could be argument of arg parameter
548 in InsetInfo. This entry is a safety measure, no lyx2lyx
549 conversion is needed in fact.
551 2010-02-11 Uwe Stöhr <uwestoehr@web.de> and Edwin Leuven <e.leuven@uva.nl>
552 * Format incremented to 377: support for multirow cells in
555 2010-01-10 Jürgen Spitzmüller <spitz@lyx.org>
556 * Format incremented to 376: new buffer param
557 \maintain_unincluded_children. If true, the aux files of
558 non-included children (with \includeonly) are updated to
559 keep the counters and refs correct.
561 2010-01-06 Jürgen Spitzmüller <spitz@lyx.org>
562 * Format incremented to 375: add support for \includeonly
563 This adds a new buffer param list of relative filenames
564 which are output as \includeonly arguments, like this:
570 2009-12-30 Richard Heck <rgheck@comcast.net>
571 * Format incremented to 374: add html output options.
572 \html_use_mathml (boolean): whether to use MathML or images
573 \html_be_strict (boolean): whether to be XHTML 1.1 compliant
575 2009-12-07 Jürgen Spitzmüller <spitz@lyx.org>
576 * Format incremented to 373: merge g-brief-de and g-brief-en
577 classes into one g-brief class.
578 All German layout names are replaced by English ones, the
579 two classes are renamed to g-brief.
581 2009-11-29 Jürgen Spitzmüller <spitz@lyx.org>
582 * Format incremented to 372: new buffer param fontencoding.
583 This param holds a buffer-specific fontencoding (argument
584 of the fontenc package).
586 - global: use lyxrc.fontenc [this is the default]
587 - default: do not load the fontenc package at all
588 - <ENC>: real encodings such as "T1". Multiple encodings
589 can be separated by comma.
591 2009-11-11 Uwe Stöhr <uwestoehr@web.de>
592 * Format incremented to 371: add option to suppress the LaTeX
595 2009-07-20 Uwe Stöhr <uwestoehr@web.de>
596 * Format incremented to 370: introduce a document option to
597 suppress the default date.
599 2009-07-22 Vincent van Ravesteijn <vfr@lyx.org>
600 * Format incremented to 369: add the author ids to the list of
601 authors and let the numbering start with 1 in stead of 0.
603 2009-07-21 Jürgen Spitzmüller <spitz@lyx.org>, Uwe Stöhr <uwestoehr@web.de>
604 * Format incremented to 368: allow to use glue lengths for
606 We just revert hspaces with glue lengths to ERT, since the
607 inset didn't support them prior to format 368.
608 No explicit conversion.
610 2009-07-20 Uwe Stöhr <uwestoehr@web.de>
611 * Format incremented to 367: allow to use percent lengths for
612 vertical and horizontal spaces.
614 2009-07-20 Uwe Stöhr <uwestoehr@web.de>
615 * Format incremented to 366: allow to use percent lengths for the
616 paragraph skip separation.
618 2009-07-19 Uwe Stöhr <uwestoehr@web.de>
619 * Format incremented to 365: support for paragraph indentation.
621 2009-07-13 Jürgen Spitzmüller <spitz@lyx.org>
622 * Format incremented to 364: add \filename_suffix parameter
624 Possible values: 0, 1.
625 If "1", the branch name is appended to the filename on export
626 (e.g., <filename>-<suffix>.pdf).
628 2009-07-11 Uwe Stöhr <uwestoehr@web.de>
629 * Format incremented to 363: support for horizontal longtable
632 2009-06-11 Jürgen Spitzmüller <spitz@lyx.org>
633 * Format incremented to 362: support for the applemac encoding.
635 2009-05-25 Jürgen Spitzmüller <spitz@lyx.org>
636 * Format incremented to 361: support for custom setting of
637 bibliography (longest) label width.
638 Empty file format change.
640 2009-05-22 Jürgen Spitzmüller <spitz@lyx.org>
641 * Format incremented to 360: param width for nomencl_print
643 1.) adds a further value "width" to param set_width
646 2.) a param width, which takes a length
647 If "width" is chosen, we define the indendation of the nomencl
648 list via the optional argument of \printnomenclature, e.g.
649 \printnomenclature[2cm]{}
651 2009-05-22 Jürgen Spitzmüller <spitz@lyx.org>
652 * Format incremented to 359: param set_width for nomencl_print
653 CommandInset. This specifies how wide the longest nomencl label
654 is (i.e., how wide the indendation in the nomencl list is).
656 - none: do not specifiy the width (use predefined values)
657 - auto: compute the widest label and specify via
658 \settowidth{\nomlabelwidth}{<widest label>}
660 2009-05-22 Jürgen Spitzmüller <spitz@lyx.org>
661 * Format incremented to 358: support for custom bibtex and
664 2009-05-05 Pavel Sanda <sanda@lyx.org>, Enrico Forestieri <forenr@lyx.org>
665 * Format incremented to 357: Change of the latex output for
666 underline from \underbar to ulem's \uline.
668 2009-05-05 Pavel Sanda <sanda@lyx.org>
669 * Format incremented to 356: support for double and wave underline
670 character styles via ulem's \uuline and \uwave
672 2009-05-03 Pavel Sanda <sanda@lyx.org>
673 * Format incremented to 355: support for strikeout character
674 style via ulem's \sout
676 2009-04-26 Jürgen Spitzmüller <spitz@lyx.org>
677 * Format incremented to 354: support for splitindex's
678 \printindex* and \printsubindex*.
680 2009-04-26 Jürgen Spitzmüller <spitz@lyx.org>
681 * Format incremented to 353: support for splitindex's
684 2009-04-15 Jürgen Spitzmüller <spitz@lyx.org>
685 * Format incremented to 352: splitindex support.
687 2009-04-11 Uwe Stöhr <uwestoehr@web.de>
688 * Format incremented to 351: support to set a page background
691 2009-04-06 Jürgen Spitzmüller <spitz@lyx.org>
692 * Format incremented to 350: new param \default_output_format.
694 2009-04-05 Jürgen Spitzmüller <spitz@lyx.org>
695 * Format incremented to 349: initial support for XeTeX.
697 2009-01-30 Uwe Stöhr <uwestoehr@web.de>
698 * Format incremented to 348: support for \*phantom.
700 2009-01-03 Vincent van Ravesteijn <V.F.vanRavesteijn@tudelft.nl>
701 * Format incremented to 347: support for tabular valign.
703 2008-11-28 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
704 * Format incremented to 346: support for German (Switzerland):
707 2008-11-07 José Matos <jamatos@lyx.org>
708 * Format incremented to 345: for docbook backend CharStyle: -> Element:
711 2008-10-12 Pavel Sanda <sanda@lyx.org>
712 * Format incremented to 344: sanitize backreference settings
713 for hyperref (fix bug 5340).
715 2008-10-12 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
716 * Format incremented to 343: new param \use_default_options
719 2008-10-12 Uwe Stöhr <uwestoehr@web.de>
720 * Format incremented to 342: support for Mongolian.
722 2008-09-30 Uwe Stöhr <uwestoehr@web.de>
723 * Format incremented to 341: support for TABs in listings.
725 2008-08-01 José Matos <jamatos@fc.up.pt>
726 * Format incremented to 340: move empty layouts to "Plain Layout".
728 2008-07-28 Richard Heck <rgheck@brown.edu>
729 * Format incremented to 339: removal of default modules.
731 2008-06-21 Uwe Stöhr <uwestoehr@web.de>
732 * Format incremented to 338: support for polytonic Greek.
734 2008-06-13 Abdelrazak Younes <younes@lyx.org>
735 * Format incremented to 337: convert/revert graphics display param.
737 2008-06-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
738 * Format incremented to 336: new param \font_cjk.
740 2008-05-30 Richard Heck <rgheck@brown.edu>
741 * Format incremented to 335: fixes for InsetSpace problems.
743 2008-05-16 Uwe Stöhr <uwestoehr@web.de>
744 * Format incremented to 334: fix for bug 4868.
746 2008-05-09 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
747 * Format incremented to 333: fixes in the APA layout.
749 2008-05-06 Pavel Sanda <sanda@lyx.org>
750 * Format incremented to 332: Added groupId for graphics insets.
752 2008-25-04 Helge Hafting <helge.hafting@aitel.hist.no>
753 * Format incremented to 330: More horizontal fills
754 - \leftarrowfill, \rightarrowfill
755 - \upbracefill, \downbracefill
757 2008-04-28 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
758 * Format incremented to 329: new param \master.
760 2008-04-18 Bo Peng <ben.bob@gmail.com>
761 * Format incremented to 328: Revert the support for embedding
763 2008-04-16 Uwe Stöhr <uwestoehr@web.de>
764 * Format incremented to 327: support for Mexican Spanish.
766 2008-04-11 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
767 * Format incremented to 326: support for pdflatex via external inset.
769 2008-03-29 Uwe Stöhr <uwestoehr@web.de>
770 * Format incremented to 325: merge the two Japanese languages to one that is
771 encoding independent.
773 2008-03-25 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
774 * Format incremented to 324: merge the two newline insets.
776 2008-03-25 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
777 * Format incremented to 323: merge the diverse newpage insets.
779 2008-03-24 Richard Heck <rgheck@comcast.net>
780 * Format incremented to 322: local layout
782 2008-03-18 Edwin Leuven <e.leuven@uva.nl>
783 * Format incremented to 321: drop row/col lines and ensure
784 consistency between cell and row/col lines.
785 Make the separation between \begin_inset and Tabular a
786 single space (it used to be a double space for lyx < 1.4)
788 2008-03-18 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
789 * Format incremented to 320: support for protected horizontal fill
792 2008-03-10 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
793 * Format incremented to 319: hspace and extended hfill support
795 2008-03-09 Bo Peng <ben.bob@gmail.com>
796 * Format incremented to 318: add \extra_embedded_files to buffer params
798 2008-03-02 Uwe Stöhr <uwestoehr@web.de>
799 * Format incremented to 317: support floating placements for wrap floats
801 2008-03-02 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
802 * Format incremented to 316: support for subfloats (subfig package)
804 2008-02-18 Richard Heck <rgheck@comcast.net>
805 * Format incremented to 315: support for column separation in page margins
807 2008-02-03 Uwe Stöhr <uwestoehr@web.de>
808 * Format incremented to 314: adapt scrlttr2 class for serial letters
810 2008-01-12 Richard Heck <rgheck@comcast.net>
811 * Format incremented to 313: change in how modules are represented
813 2008-01-11 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
814 * Format incremented to 312: support for sidewaysalgorithm (rotfloat)
815 and wide sideways{figure,table}.
817 2008-01-10 Richard Heck <rgheck@comcast.net>
818 * Format incremented to 311: dummy format to drive the AMS conversion
820 2007-12-28 Bernhard Reiter <ockham@gmx.net>
821 * Format incremented to 310: support for \nocite{*}
823 2007-12-11 Bernhard Reiter <ockham@gmx.net>
824 * Format incremented to 309: support for \nocite
826 2007-12-15 Uwe Stöhr <uwestoehr@web.de>
827 * Format incremented to 308: support for Serbian (Latin)
829 2007-12-05 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
830 * Format incremented to 307: support for \slash and \nobreakdash
832 2007-12-05 Uwe Stöhr <uwestoehr@web.de>
833 * Format incremented to 306: support for Interlingua
835 2007-12-05 Uwe Stöhr <uwestoehr@web.de>
836 * Format incremented to 305: support for Bahasa Malaysia
838 2007-12-03 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
839 * Format incremented to 304: framed and shaded boxes are now real boxes
842 2007-11-25 Uwe Stöhr <uwestoehr@web.de>
843 * Format incremented to 303: remove Serbocroatian as this was not a real
844 babel language (Croatian was used instead in the background)
847 2007-11-25 Uwe Stöhr <uwestoehr@web.de>
848 * Format incremented to 302: support for Latin and North Sami
850 2007-11-24 Uwe Stöhr <uwestoehr@web.de>
851 * Format incremented to 301: support for \linebreak
853 2007-11-23 Uwe Stöhr <uwestoehr@web.de>
854 * Format incremented to 300: support for \pagebreak
856 2007-11-01 Uwe Stöhr <uwestoehr@web.de>
857 * Format incremented to 299: support for hyperlink types
859 2007-11-01 Stefan Schimanski <sts@1stein.org>
860 * Format incremented to 298: math-macro code has been rewritten,
861 now it supports definitions with optional parameters
863 2007-10-29 Uwe Stöhr <uwestoehr@web.de>
864 * Format incremented to 297: support for Albanian, lower Sorbian,
865 fixed upper Sorbian language
867 2007-10-23 Richard Heck <rgheck@comcast.net>
868 * Format incremented to 296: InsetInclude becomes an InsetCommand
870 2007-10-12 Uwe Stöhr <uwestoehr@web.de>
871 * Format incremented to 295: get rid of the htmlurl command that was
872 needed for docbook, add the option to create a hyperlink instead
874 2007-10-12 Pavel Sanda <ps@twin.jikos.cz>
875 * Format incremented to 294: PDFOptions: add usetitle,
878 2007-10-11 Bo Peng <ben.bob@gmail.com>
879 * Format incremented to 293: Add InsetInfo.
881 2007-10-09 Uwe Stöhr <uwestoehr@web.de>
882 * Format incremented to 292: Support for Japanese without
883 using CJK and inputenc. (japanese-plain)
885 2007-10-04 Uwe Stöhr <uwestoehr@web.de>
886 * Format incremented to 291: Support for Vietnamese.
888 2007-10-03 Uwe Stöhr <uwestoehr@web.de>
889 * Format incremented to 290: Add table wrap floats
891 2007-10-03 Martin Vermeer <martin.vermeer@tkk.fi>
892 * Format incremented to 289: make Index a collapsable inset.
894 2007-09-25 Richard Heck <rgheck@comcast.net>
895 * Format incremented to 288: Change how command insets are
896 represented in LyX files.
898 2007-09-24 Uwe Stöhr <uwestoehr@web.de>
899 * Format incremented to 287: Add missing optional parameters
902 2007-09-21 Pavel Sanda <ps@twin.jikos.cz>
903 * Format incremented to 286: LyX now supports hyperref and some
906 2007-09-11 Bo Peng <ben.bob@gmail.com>
907 * Format incremented to 285: Tweaks to embedded file format
908 Remove inzip parameter from graphics insets.
910 2007-09-09 Helge Hafting <helge.hafting@aitel.hist.no>
911 * Format incremented to 284: LyX now implements wrapped figures
912 using wrapfig.sty instead of floatflt.sty. The latter
913 is rather buggy, the former also has more options.
914 No conversion as the .lyx doesn't change.
915 The .tex export is slightly different, necessitating the
918 2007-09-08 Martin Vermeer <martin.vermeer@tkk.fi>
920 * format incremented to 283: CharStyle insets are now
923 2007-08-31 Bo Peng <ben.bob@gmail.com>
925 * format incremented to 282: lyx files can be zipfiles with
928 2007-08-29 Richard Heck <rgheck@comcast.net>
930 * format incremented to 281: allow modules for layout files
932 2007-08-17 Martin Vermeer <martin.vermeer@tkk.fi>
934 * format incremented to 280: the show_label parameter
935 is depreciated in favour of (Collapsable) status.
937 2007-08-17 Martin Vermeer <martin.vermeer@tkk.fi>
939 * format incremented to 279: CharStyle names are now
940 expected to be of form CharStyle:Name.
942 2007-08-12 José Matos <jamatos@fc.up.pt>
944 * format incremented to 278: Close begin_deeper with a
945 corresponding end_deeper (the only case where it matters is
946 at the end of the body).
948 2007-08-12 José Matos <jamatos@fc.up.pt>
950 * format incremented to 277: lyx is able to create invalid
951 table where a multicolumn does not have a first cell
952 (required by the table file format)
954 2007-07-20 Dov Feldstern <dov@lyx.org>
956 * format *not* incremented; fixed format 249 conversion, so that it now
957 correctly deals with encodings in footnotes (part of bug 3613)
959 2007-06-26 Uwe Stöhr <uwestoehr@web.de> and Dov Feldstern <dov@lyx.org>
961 * format incremented to 276: switching exsting language 'arabic' to
962 'arabic_arabtex'; this is to differentiate from the new arabic support
963 using the arabi package.
965 2007-05-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
967 * format incremented to 275: add graphics params scaleBeforeRotation
970 2007-06-13 Dov Feldstern <dov@lyx.org>
971 * format incremented to 274: applying the conversion done in format 259
972 to the \lang property, which was forgotten back then... This is
973 slightly more complicated, because the default language has to be
974 determined on a per-paragraph basis.
976 2007-06-13 Bo Peng <ben.bob@gmail.com>
977 * format incremented to 273: add --Separator-- environment to
978 separate consecutive environments
980 2007-06-13 Bo Peng <bpeng@lyx.org>
981 * format incremented to 272: convert listings to ERT because
982 earlier versions of lyx can not handle unrecognizable
985 2007-05-15 José Matos <jamatos@lyx.org>
986 * format incremented to 271: extended textclasses accept the
987 normal font sizes: 10, 11 and 12pt.
989 2007-05-14 Martin Vermeer <martin.vermeer@tkk.fi>
990 * format incremented to 270: support beamer \alert, \structure
992 2007-05-08 Bo Peng <ben.bob@gmail.com>
993 * format incremented to 269: add listings support
994 - add preamble flag \listings_params, e.g. \listings_params "language=Python,float"
995 - add inset listings, with options lstparams and inline, e.g.
996 \begin_inset listings
997 lstparams "xleftmargin=50pt,language=Python"
999 - add \lstinputlisting Include type. e.g.
1000 \begin_inset Include \lstinputlisting{newfile1.lyx}[firstline=10,lastline=15]
1002 2007-05-06 Uwe Stöhr <uwestoehr@web.de>
1004 * format incremented to 268: add support for the CJK encodings
1005 - all encodings supported by CJK.sty are now in lib/encodings
1006 - lib/encoding has got two new flags:
1008 "inputenc" for those languages that use the inputenc-package and
1009 "CJK" for the CJK encodings
1010 - "fixed"/"variable" to divide between multi- or single-byte encoding
1011 - lib/languages allows now to set an empty language for babel
1012 in this case babel isn't called.
1014 2007-05-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1016 * format incremented to 267: add plain utf8 encoding (for XeTeX).
1018 2007-04-29 Uwe Stöhr <uwestoehr@web.de>
1020 * format incremented to 266:
1021 Support for the Armenian language
1023 2007-04-26 Uwe Stöhr <uwestoehr@web.de>
1025 * format incremented to 265: fix LyX's table border line handling
1026 With the fix (see bug 1746) LyX now takes care if the user has entered
1027 a "|" character in the argument field of tables. Therefore the "|"
1028 character has to be removed when also a table border is set.
1030 2007-04-24 José Matos <jamatos@lyx.org>
1032 * format incremented to 264:
1033 textclass cv is renamed simplecv
1035 2007-02-22 José Matos <jamatos@lyx.org>
1037 * format incremented to 263: changes in the language names (overdue):
1039 portuges -> portuguese
1041 2007-02-16 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1043 * format incremented to 262: Allow ascii \inputencoding
1045 2007-02-14 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1047 * format incremented to 261: \output_changes is now considered
1048 even if \tracking_changes is false. This allows to output existing
1049 changes even if future changes are not tracked anymore.
1052 \tracking_changes false
1053 \output_changes true
1055 is therefore converted to
1057 \tracking_changes false
1058 \output_changes false
1060 on upgrade. Nothing is done on downgrade since the new behaviour is
1061 not supported in older formats.
1063 2007-02-13 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1065 * format incremented to 260: Allow utf8x \inputencoding
1067 2007-02-12 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1069 * format incremented to 259:
1070 Old: Spaces at start or end of font changes were output outside of
1071 the font change, i.e. not 'xx\textbf{ yy }zz', but
1072 'xx \textbf{yy} zz'.
1073 New: Spaces are always output with the font set by the user.
1075 2007-01-31 Uwe Stöhr <uwestoehr@web.de>
1077 * format incremented to 258: new \lyxline definition
1079 \\newcommand{\\lyxline}[1]{
1080 {#1 \\vspace{1ex} \\hrule width \\columnwidth \\vspace{1ex}}
1083 \\newcommand{\\lyxline}[1][1pt]{%
1085 \\rule[.5ex]{\\linewidth}{#1}\\par}
1086 The new definition is more robust, see bug 1988 and now really takes care of
1087 the fontsize: \lyxline{\Huge} produces now a thicker line than \lyxline{\normalfont}
1089 2007-01-29 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1091 * format incremented to 257: Caption styles have been replaced by
1092 InsetCaption. This is at the same time also a layout file format
1093 change to format 3. layout2layout removes caption layouts from old
1095 Note that InsetCaption did exist before this format, but was never
1096 used. Old files containing do nevertheless still work.
1097 Of course users can still define a Caption style in layout files,
1098 but the special treatment in LyX is gone (apart from the sensitive
1101 2006-12-22 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1103 * format incremented to 256: allow some new inputenc settings.
1104 For the complete list, see lib/lyx2lyx/lyx_1_5.py.
1106 2006-11-25 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1108 * format incremented to 255: new insets for \clearpage and
1109 \cleardoublepage. They are written inline to the file, exactly like
1112 2006-11-13 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1114 * format incremented to 254: new header parameter \use_esint.
1115 It can have the same values as \use_amsmath: 0 (off), 1 (auto) and
1118 2006-10-18 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1120 * format incremented to 253: new nomenclature and printnomenclature
1121 insets. These are standard InsetCommand with the following parameters:
1122 \nomenclature[prefix]{symbol}{description}
1123 \printnomenclature[labelwidth]
1125 2006-10-15 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1127 * format incremented to 252: changed command inset syntax
1131 \begin_inset LatexCommand \cmdname[opt1][opt2]{arg}
1137 \bibitem [opt1]{arg}
1142 \begin_inset LatexCommand cmdname
1149 The order of the parameters and for each parameter the name and
1150 optional/required bit is now stored in InsetCommandParams.
1152 2006-10-03 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1154 * format incremented to 251: save show_label param for charstyles.
1156 On revert, the show_label param is just removed. Nothing to convert.
1158 2006-10-12 Martin Vermeer <martin.vermeer@hut.fi>
1160 * Format incremented to 250: allow optional arg to environments
1162 No material format change. Now optargs for environments are allowed
1163 to be specified in layout files and will be handled properly. When
1164 converted back to older formats, they will be ignored in LaTeX
1167 2006-08-14 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1169 * format incremented to 249: Unicode
1171 LyX documents are now always encoded in utf8. The value of
1172 \inputencoding does now only determine the encoding of the created
1174 Up to format 248 the value of \inputencoding did also determine the
1175 encoding of the LyX file:
1177 \inputencoding LyX file encoding
1178 auto as determined by the document and character
1181 everything else as determined by \inputencoding
1183 The difference between auto and default is only the LaTeX output:
1184 auto causes loading of the inputenc package, default does not.
1186 2006-07-03 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1188 * format incremented to 248: Basic booktabs support
1190 The <features> tag has a new switch: booktabs="true|false".
1191 An absent switch is equivalent to booktabs="false".
1192 Horizontal lines are set with the booktabs package if this switch
1195 The <row> tag of tabulars has the following new attributes:
1196 topspace, bottomspace and interlinespace. All take a LyXLength
1197 as value, or the special keyword "default".
1199 2006-06-10 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1201 * format incremented to 247. The Grand Font Interface Rewrite.
1202 (1) Split font selection to rm, sf, tt:
1203 \fontscheme -> \font_roman, \font_sans, \font_typewriter
1205 \fontscheme \font_roman \font_sans \font_typewriter
1206 default default default default
1207 ae ae default default
1208 times times default default
1209 palatino palatino default default
1210 helvet default helvet default
1211 avant default avant default
1212 newcent newcent default default
1213 bookman bookman default default
1214 pslatex times (or \usepackage{pslatex})
1216 \font_roman: cmr (-> \renewcommand{\rmdefault}{cmr}),
1217 lmodern, charter, utopia, ccfonts, chancery, beraserif
1218 (-> \usepackage{<name>})
1219 \font_sans: cmss, lmss, cmbr
1220 (-> \renewcommand{\sfdefault}{<name>})
1221 berasans (-> \usepackage{<name>})
1222 \font_typewriter: cmtt, lmtt, cmtl,
1223 (-> \renewcommand{\sfdefault}{<name>})
1224 courier, luximono, beramono
1225 (-> \usepackage{<name>})
1226 (2) New param \font_default_family (rmdefault, sfdefault, ttdefault)
1227 (3) New param \font_sc (true, false).
1228 (4) New param \font_osf (true, false).
1229 (5) New param \font_sf_scale (float)
1230 (6) New param \font_tt_scale (float)
1231 Support for the following fonts has been added:
1232 bera, ccfonts, chancery, charter, cmbright, computer modern (explicitely),
1233 courier, lmodern, luximono, utopia.
1234 Support for the following font has been removed:
1235 pslatex (it's superseded by mathptmx (times)).
1237 2006-06-03 Martin Vermeer <martin.vermeer@hut.fi>
1239 * format incremented to 246. The framed.sty package is
1240 now supported with note types framed and shaded.
1242 2005-10-12 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1244 * format incremented to 245. The \quotes_times parameter
1247 2005-09-24 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1249 * format incremented to 244. Rename '\InsetSpace \,'
1250 to '\InsetSpace \thinspace{}', because the comma was
1251 not parsed by lyxlex, and '\InsetSpace \space' to
1252 '\InsetSpace \space{}' in favour of consistency.
1254 2005-07-18 José Matos <jamatos@lyx.org>
1256 * format incremented to 243.
1258 * this change only affects the preamble, the paperpackage
1259 option was removed and papersize is changed to default.
1261 2005-06-21 Jean-Marc Lasgouttes <lasgouttes@lyx.org>
1263 * format incremented to 242. There is no file format per
1264 se, but the "frenchb" language has been removed from lib/language
1265 and has to be translated to "french" by lyx2lyx.
1267 2005-02-03 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1269 * format incremented to 241.
1271 All following changes apply only to text in ERT insets. The
1272 rationale is that text in ERT is simply ASCII text, and nothing more.
1274 * paragraph breaks are now a single newline in latex and not a
1275 paragraph break anymore (bug 698).
1276 * \newline is not allowed anymore, because it is redundant (see above)
1277 * layouts other than Standard, paragraph parameters and font changes
1278 are not allowed anymore. They never made sense and were ignored for
1279 latex output, but now they can't be read or set anymore (bug 922).
1282 2005-01-23 Jürgen Spitzmüller <j.spitzmüller@gmx.de>
1284 * format incremented to 240.
1286 \output_changes {true|false}
1287 (should the change tracking marks be visible in the output or not?)
1288 * lyx2lyx should just delete the param in 239.
1290 2005-01-06 José Matos <jamatos@lyx.org>
1292 * format incremented to 239.
1293 * the paragraph parameters are displayed in their own line. This
1294 change is consistent with the insets behaviour, and corresponds
1295 to a more uniform treatment of the paragraphs since some of them
1296 had already their own line.
1298 An example of a single paragraph follows:
1300 \begin_layout Standard
1301 \paragraph_spacing single
1307 2004-12-03 José Matos <jamatos@lyx.org>
1309 * format incremented to 238.
1310 * The compatibility code to read old latex accents from 0.12.x in
1311 InsetLatexAccent::checkContents has been removed.
1312 The following translations are done:
1313 "\i \x" -> "\i \x{}"
1314 "\i \xy" -> "\i \x{y}"
1315 "\i \x y" -> "\i \x{y}"
1316 "\i \x\i" -> "\i \x{\i}"
1317 "\i \x\j" -> "\i \x{\j}"
1318 x is a latex accent command, y the base character. \, i and j are
1320 lyx did these changes already from 0.12.x -> 215, but not lyx2lyx,
1321 so formats 215 - 237 can have both versions.
1324 2004-10-10 José Matos <jamatos@lyx.org>
1326 * format incremented to 237.
1327 * In the header, the following statments use now booleans values,
1333 2004-08-15 José Matos <jamatos@lyx.org>
1335 * format incremented to 236.
1342 * The options for \papersize are changed:
1345 * All whitespaces are removed at the end of lines, when
1346 not necessary. As an example we have all the lines in the header that
1347 do not belong to the preamble.
1349 2004-07-01 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1351 * format incremented to 235.
1352 * \paperpackage had an off-by-one error. Translation table:
1354 234: a4 a4wide widemarginsa4
1355 235: none a4 a4wide widemarginsa4
1357 The "widemarginsa4" setting of 235 has no equivalent in 234.
1359 2004-05-12 Angus Leeming <leeming@lyx.org>
1361 * format incremented to 234.
1362 * the citation engine is specified explicitly rather than being
1363 deduced from 3 bools.
1366 \use_numerical_citations 0 -> \cite_engine <style>
1369 where <style> is one of "basic", "natbib_authoryear",
1370 "natbib_numerical" or "jurabib".
1372 2004-04-29 Georg Baum <Georg.Baum@post.rwth-aachen.de>
1374 * format incremented to 233.
1375 * insetgraphics does not allow filenames without extension anymore.
1376 The complete filename has to be given.
1378 2004-03-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1380 * format incremented to 232.
1382 * Support for bibtopic (sectioned bibliographies).
1383 - bufferparam \use_bibtopic [1|0]
1384 - the bibtex inset has a second argument for bibtopic's
1385 btPrint{Cited|NotCited|All} command:
1387 \begin_inset LatexCommand \bibtex[<style>]{<database>}
1389 \begin_inset LatexCommand \bibtex[<style>][<btPrintX>]{<database>}
1390 Forwards, there's nothing to be done. Backwards, \usepackage[dot]{bibtopic}
1391 has to be inserted to the preamble. Instead of the bibtex inset, the LaTeX
1392 \bibliographystyle{<style>}
1393 \begin{btSect}{<database>}
1398 2004-03-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1400 * format incremented to 231.
1402 * Support for sidewaysfigure/sidewaystable (rotating package).
1403 insetfloat has now a param \sideways [true|false] (default is false).
1404 The param should be erased on downwards conversion, if it was true,
1405 the inset should be replaced by
1406 \begin{sidewaysfigure} <content> \end{sidewaysfigure}
1408 \begin{sidewaystable} <content> \end{sidewaystable}
1411 2004-02-23 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1413 * format incremented to 230.
1415 * Support for a second optional argument in insetcommand.
1416 currently, citation uses this to support natbibs second
1417 optional argument \cite[before][after]{key}.
1418 I think there's nothing to convert upwards. Downwards, the
1419 commands with 2 optional args need to be converted to ERT.
1421 * Support for jurabib (param \use_jurabib [1|0], default is 0).
1422 When converting downwards, \usepackage{jurabib} has to be added
1423 to the preamble and, if babel is used, \usepackage{babel} before
1424 (jurabib fails if babel is called afterwards). If the natbib commands
1425 are used together with jurabib, they have to be converted to ERT too.
1427 2003-12-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1429 * format incremented to 229.
1430 * Minipages cannot be read anymore. All minipage insets will
1431 be converted to frameless box insets between 228->229.
1433 2003-12-15 Angus Leeming <leeming@lyx.org>
1435 * format incremented to 228.
1436 * Change the output of all insets derived from InsetCollapsable
1437 except for InsetERT (which has a similar output already), changing lines
1438 "collapsed true" -> "status collapsed"
1439 "collapsed false" -> "status open".
1440 * Change the output of InsetERT, changing lines
1441 "status Collapsed" -> "status collapsed"
1442 "status Open" -> "status open".
1443 "status Inlined" -> "status inlined".
1445 2003-12-10 Angus Leeming <leeming@lyx.org>
1447 * format NOT incremented.
1448 * add a 'draft' option to InsetExternal.
1450 2003-12-10 Angus Leeming <leeming@lyx.org>
1452 * format incremented to 227.
1453 * Change the output of InsetBox:
1454 \begin_inset Boxed -> \begin_inset Box Boxed
1455 \begin_inset Doublebox -> \begin_inset Box Doublebox
1456 \begin_inset Frameless -> \begin_inset Box Frameless
1457 \begin_inset ovalbox -> \begin_inset Box ovalbox
1458 \begin_inset Ovalbox -> \begin_inset Box Ovalbox
1459 \begin_inset Shadowbox -> \begin_inset Box Shadowbox
1461 2003-12-10 Angus Leeming <leeming@lyx.org>
1463 * format incremented to 226.
1464 * Change the output of InsetNote:
1465 \begin_inset Note -> \begin_inset Note Note
1466 \begin_inset Comment -> \begin_inset Note Comment
1467 \begin_inset Greyedout -> \begin_inset Note Greyedout
1469 2003-11-28 André Pönitz
1471 * Remove space_above/space_below from Paragraph.
1472 This is now handled by InsetVSpace.
1474 2003-10-07 Angus Leeming <leeming@lyx.org>
1476 * Add transformations to InsetExternal
1478 boundingBox 0 0 20 20 the dimensions of the B.B..
1479 Output if the B.B. is not empty.
1480 clip clip the image to the B.B.
1482 extra LaTeX "draft" 'extra' data passed to the primary
1483 command for this output format.
1484 (Possible formats LaTeX, PDFLaTeX,
1485 LinuxDoc, DocBook, Ascii.)
1486 The string can contain spaces and so
1487 is wrapped in "...".
1488 rotateAngle 30 Rotation of the data.
1489 Output for non-zero rotation only.
1490 rotateOrigin bottomleft Rotation origin.
1491 Output for non-zero rotation and
1492 non-default origin (center) only.
1494 width 2cm Output only if the image is resized.
1498 2003-10-07 Martin Vermeer <martin.vermeer@hut.fi>
1500 * Added box inset. File format:
1502 \begin_inset Ovalbox Boxed/Frameless/ovalbox/Ovalbox
1503 /Shadowbox/Doublebox
1507 inner_pos "b" t/c/b/s
1509 width "100col%" unit+width-string
1510 special "none" none/height/depth
1512 height "1in" unit+width-string
1513 height_special "totalheight" none/height/depth
1515 collapsed false true/false
1517 \begin_layout Standard
1524 This box (Frameless, has_inner_box=1, use_parbox=0) replaces
1525 the pre-existing Minipage inset. Parameters translate as follows:
1526 position 0/1/2 -> t/c/b
1527 inner_position 0/1/2/3 -> inner_pos c/t/b/s
1532 2003-08-19 Michael Schmitt <michael.schmitt@teststep.org>
1534 * attribute valignment="center" is replaced by valignment="middle"
1535 for tabular columns and cells
1537 2003-08-17 Martin Vermeer <martin.vermeer@hut.fi>
1539 * Added branch inset. File format:
1541 branch definition in the header:
1542 \branch <branchname>
1547 \begin_inset Branch <branchname>
1548 collapsed false true/false
1550 \begin_layout Standard
1557 2003-07-28 José Matos <jamatos@lyx.org>
1559 * \the_end is replaced with \end_document
1561 2003-07-28 José Matos <jamatos@lyx.org>
1563 * \layout is replaced with \begin_layout
1565 2003-07-28 José Matos <jamatos@fep.up.pt>
1567 Format bumped to 225
1569 * All layouts finish now with \end_layout
1571 2003-06-04 Angus Leeming <leeming@lyx.org>
1573 Format bumped to 224
1575 * the storage of the external inset has been changed from
1577 \begin_inset External XFig,"file.fig",""
1583 \begin_inset External
1586 display <display_type>
1591 throwing away the final arg (here "", more generally "<string>") that holds
1592 the parameters variable.
1593 Variables are output if present (filename) or different from the default
1594 values (display, lyxscale).
1596 Moreover, the RasterImage template has been scrapped. All RasterImage
1597 external insets are now converted to Graphics insets.
1599 2003-05-20 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
1601 * Added new space insets:
1602 \SpecialChar ~ is now \InsetSpace ~
1603 ERT: "\ " could be converted to InsetSpace \<space>
1604 ERT: "\," could be converted to InsetSpace \,
1606 2003-04-24 André Pönitz <poenitz@gmx.net>
1608 * Added eqref support:
1609 \begin_inset LatexCommand \eqref{label}
1611 2003-03-14 Dekel Tsur
1613 * Format bumped to 223.
1615 2003-03-12 John Levon <levon@movementarian.org>
1617 * Added \\end_header to signify the end of the header in a
1618 more robust fashion.
1620 * use_amsmath is now a tristate {0 = never, 1 = auto, 2 = always}
1622 2003-02-10 John Levon <levon@movementarian.org>
1624 Format bumped to 222
1626 Added \\tracking_changes 0|1 to the header.
1628 Added \\author to the header. This can be present multiple
1629 times, and is of the form :
1631 \\author "Real Name" email@address.com
1633 Added \\change_deleted, \\change_inserted. Each of these does not
1634 span a paragraph, and is delimited by "\\change_unchanged\n". Both are
1637 \\change_inserted author time
1639 where author is an integer ID reference into the author list in
1640 the header, and time is time_t.
1642 2002-10-24 Rob Lahaye <lahaye@snu.ac.kr>
1644 * InsetGraphicsParams.h (scale): is now a float, not an unsigned int.
1646 2002-08-22 Rob Lahaye <lahaye@snu.ac.kr>
1648 New graphics dialog. With the removal of buttons in the dialog, also
1649 keywords in the graphics inset went. The following keywords do not
1659 Only non-default values are saved to the lyx files. The defaults of the remaining
1669 BoundingBox <from file>
1672 rotateOrigin centerBaseline
1674 subcaptionText <empty>
1677 The remaining keywords have sufficient overlap with the old ones for a
1678 smooth reading of the 1.2.x inset keywords in most common cases.
1680 Compatibility is certainly broken for the old lyxwidth/lyxheight keywords.
1681 They don't exist anymore and we can't translate them into a scaling value, while
1682 we're reading the graphics inset. The old lyxwidth/lyxheight keyword and its
1683 argument is ignored and lost.
1685 Only few compatibility issues are left for lyx2lyx:
1687 ------------------------------------------------------------------------------
1688 old-token new-token remove
1689 ------------------------------------------------------------------------------
1690 size_kind original / size_type 0 scale 100 width <val>
1694 size_kind width_height / size_type 1 - scale <val>
1696 lyxsize_kind original / lyxsize_type 0 lyxscale 100 lyxscale <val>
1697 ------------------------------------------------------------------------------
1698 [replace old-token by new-token, and remove any of subsequent tokens as listed]
1700 If "rotate" is absent, lyx2lyx should ignore "rotateAngle <val>":
1701 if ( "rotateAngle <val>" is there WITHOUT being preceded by the keyword "rotate" )
1703 replace "rotateAngle <val>" by "rotateAngle 0"
1706 2002-08-12 Andre' Poenitz <poenitz@gmx.de>
1708 Added \lyxlock for locked math inset when written to .lyx file.
1709 When "downgrading" .lyx files this should simple be deleted but it
1710 does not hurt at all if it stays in. It does not have to be added
1714 2002-08-02 Angus Leeming <leeming@lyx.org>
1716 Added a boolean "preview" flag to InsetCommandParams.
1717 Currently it is written only by InsetInclude, because only this
1718 class can generate a preview of its contents.
1720 The LyX file now contains:
1722 \begin_inset Include \input{snapshot_t=40.tex}
1727 Earlier versions of LyX just swallow this extra token silently.
1729 2002-08-12 Angus Leeming <leeming@lyx.org>
1731 The 1.2.0 InsetGraphicsParams "size_type" and "lyxsize_type" have been
1732 renamed as "size_kind" and "lyxsize_kind" respectively.
1734 \begin_inset Graphics FormatVersion 1
1737 - size_kind original
1738 + size_type original
1741 - lyxsize_kind original
1742 + lyxsize_type original