[lyx.git] / development / FORMAT

LyX file-format changes
-----------------------

Please keep the entries informative enough, i.e. try to indicate what
changes happened in particular if possible. A good example would be 
2010-01-10 entry. 

Please also indicate the revision at which your change was committed. 
This will help later people understand what you did, especially as 
adjustments are made to tex2lyx and bugs are fixed in lyx2lyx.

-----------------------


2012-09-22 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 440 
          Math (TeX) font UI.
          New Buffer param "\math_font <value>",
          supported values are:
          * "auto": automatically adapt math font (the status quo ante).
          * "default": use class default, i.e. prevent TeX font packages
            from changing the math font, if possible.
          * "eulervm": use the eulervm package.

2012-09-19 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 439 
          Support for the MinionPro LaTeX font.

2012-08-23 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 438 
          Support for some IPA macros that are not unicoded.
          (1) tone symbols from tipa's "tone" subpackage:
          -- \tone{51} => \IPAChar \tone{51}
          -- \tone{15} => \IPAChar \tone{15}
          -- \tone{45} => \IPAChar \tone{45}
          -- \tone{12} => \IPAChar \tone{12}
          -- \tone{454} => \IPAChar \tone{454}
          (2) TIPA tie bars:
          -- \toptiebar{<content>} =>
              \begin_inset IPADeco toptiebar
              status open

              \begin_layout Plain Layout
              <content>
              \end_layout

              \end_inset
          -- \bottomtiebar{<content>} =>
              \begin_inset IPADeco bottomtiebar
              status open

              \begin_layout Plain Layout
              <content>
              \end_layout

              \end_inset

2012-08-19 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 437 
          Support for the TeX Gyre LaTeX fonts.

2012-08-18 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 436 
          Support for the mathdesign LaTeX fonts.

2012-08-17 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 435 
          Support for the txtt LaTeX font.

2012-08-17 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 434 
          Support for the libertine LaTeX font.

2012-06-22 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 433 
          switch the Armenian language support from ArmTeX to XeTeX/polyglossia

2012-06-08 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 432 
          support for the document languages ancientgreek, coptic, divehi, hindi,
          kurmanji, lao, marathi, occitan, sanskrit, syriac, tamil, telugu and urdu

2012-05-06 Georg Baum  <Georg.Baum@post.rwth-aachen.de>
        * Format incremented to 431
          Add \use_package amssymb

2012-04-16 Georg Baum  <Georg.Baum@post.rwth-aachen.de>
        * Format incremented to 430
          Support \lstlistoflistings in InsetTOC

2012-03-21 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 429
          support for table rotation
          (table option "rotate" specifies now a number with the rotation angle)

2012-03-16 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 428
          support for table cell rotation
          (table cell option "rotate" specifies now a number with the rotation angle)

2012-03-06 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 427
          Add native TIPA inset.

2012-02-20 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 426 (r40784)
          support for the verbatim environment
          (added only a layout)

2012-01-23 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 425 (r40663)
          support for the LaTeX-package cancel (fix bug 6819)

2012-01-09 Julien Rioux <jrioux@lyx.org>
        * Format incremented to 424 (r40592)
          New buffer param \cite_engine_type to specify the type of
          citation labels being used, authoryear or numerical.

2012-01-05 Georg Baum  <Georg.Baum@post.rwth-aachen.de>
        * Format incremented to 423 (r40574)
          support for the LaTeX-package mathtools (fix bug 7949)
          New buffer param \use_package mathtools

2012-01-03 Georg Baum  <Georg.Baum@post.rwth-aachen.de>
        * Format incremented to 422 (r40563)
          \use_amsmath 0/1/2    => \use_package amsmath 0/1/2
          \use_esint 0/1/2      => \use_package esint 0/1/2
          \use_mhchem 0/1/2     => \use_package mhchem 0/1/2
          \use_mathdots 0/1/2   => \use_package mathdots 0/1/2
          \use_undertilde 0/1/2 => \use_package undertilde 0/1/2

2011-12-18 Georg Baum  <Georg.Baum@post.rwth-aachen.de>
        * Format incremented to 421 (r40522)
          The caption flag of longtable rows is no longer exclusive to the head
          and foot flags, since captions can occur in any of the two heads and
          two foots. Before, captions were implicitly in head or firsthead.
          For Docbook and XHTML output the caption flag "wins" over head/foot.

2011-12-12 Julien Rioux <jrioux@lyx.org>
        * Format incremented to 420 (r40484)
          New buffer param \biblio_style to specify a document-wide
          default bibliography style (BibTeX style for the moment).

2011-12-09 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 419 (r40452)
          support for the document languages australian and newzealand

2011-12-08 Richard Heck <rgheck@lyx.org>
        * Format incremented to 418 (r40427)
          Introduce justification preference.

2011-11-07 Julien Rioux <jrioux@lyx.org>
        * Format incremented to 417 (r39982 and r40155)
          Rename the japanese encodings to names understood by pLaTeX.

2011-08-29 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 416 (r39557)
          support for \negmedspace and \negthinspace outside of math
          support for \hfill, \enspace, \hspace* and \hspace*{\fill} in math
          No new InsetSpace parameters

2011-07-30 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 415 (r39464)
          support for the LaTeX-package undertilde (fix bug 6622)
          New buffer param \use_undertilde

2011-07-02 Pavel Sanda <sanda@lyx.org>
        * Format incremented to 414 (r39367)
          New InsetSpace param \textvisiblespace

2011-02-15 Richard Heck <rgheck@comcast.net>
        * Format incremented to 413 (r37682)
          New buffer param \html_css_as_file to control whether
          CSS is output to header to to style file

2011-02-03 Edwin Leuven <e.leuven@gmail.com>
        * Format incremented to 412 (r37471)
          Support tabular* : add tabularwidth parameter to
          tabular features

2011-02-03 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 411
          New buffer param \language_package to allow per-document
          language package selection (bug 2909).

2010-11-26 Richard Heck <rgheck@comcast.net>
        * Format incremented to 410 (r36520)
          Rename "\\begin_layout Labeling" to "\\begin_layout List"
          in the KOMA (scr*) classes.

2010-11-26 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 409 (r36500)
          Rename buffer param \use_xetex to \use_non_tex_fonts.

2010-11-21 Georg Baum  <Georg.Baum@post.rwth-aachen.de>
        * Format incremented to 408 (r36424)
          New inset for sub/superscripts:
          script superscript
          script subscript

2010-11-07 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 407 (r36182)
          Support for vertical offset of multirow cells.
          New tag "mroffset" for multirow cells with an offset.

2010-11-06 Jean-Marc Lasgouttes <lasgouttes@lyx.org>
        * Format incremented to 406 (r36163)
          Proper ERT behaviour for normal layouts. Paragraph breaks 
          generate single \n in latex output when ParbreakIsNewline
          is true.

2010-10-23 Vincent van Ravesteijn <vfr@lyx.org>
        * Format incremented to 405 (r36134)
                Author hash numbers.
          The authors that are used in change tracking are
          now identified in the file by a number that represents
          the hash value of the name and email. In this way
          collaboration using version control leads to way less
          merge conflicts.

2010-10-13 Richard Heck <rgheck@comcast.net>
        * Format incremented to 404 (r35623)
          Support for refstyle package.
          Changed the LaTeXCommand for InsetRef from "prettyref"
          to "formatted", where "formatted" is now interprted
          differently, depending upon whether the new buffer param
          use_refstyle is true or false.

2010-10-12 Richard Heck <rgheck@comcast.net>
        * Format incremented to 403 (r35608)
          Renaming of flex insets.
          Changed 
            \begin_inset Flex TAG:Style 
          to
            \begin_inset Flex Style
          where TAG is Custom, CharStyle, or Element

2010-10-11 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 402 (r35590)
          No new or removed parameter, used to insert a
          clear(double)page before BibTeX inset.

2010-09-19 Ronen Abravanel <ronena@gmail.com>
        * Format incremented to 401 (r35455)
          Support for Feynman diagrams
          New math command \Diagram

2010-09-07 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 400 (r35299)
          Support for the LaTeX-command \rule.
          New CommandInset "line".

2010-08-31 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 399 (r35241)
          Support for the LaTeX-package mathdots.
          New parameter \use_mathdots.

2010-07-17 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 398 (r34941)
          Support \mathscr.
          No new parameter but the mathrsfs package will be loaded.

2010-07-16 Richard Heck <rgheck@comcast.net>
        * Format incremented to 397 (r34920)
          Remove Nameref support

2010-07-13 Richard Heck <rgheck@comcast.net>
        * Format incremented to 396 (r34884)
          nameref support
                new commands nameref and Nameref for InsetRef

2010-07-13 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 395 (r34883) 
          Support for ISO C-series paper format.
          New parameter \papersize cxpaper with (x = 0 - 6).

2010-07-03 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 394 (r34748)
          Support for makebox.
          New box parameter \use_makebox.

2010-06-07 Richard Heck <rgheck@comcast.net>
        * Format incremented to 393 (r34619)
                Renaming in LyX format: \begin_inset OptArg becomes
          \begin_inset Argument.        

2010-06-07 Richard Heck <rgheck@comcast.net>
        * Format incremented to 392 (r34615)
          Dummy format change permitting Beamer files to be converted to 
                a new, more useful format.

2010-06-05 Edwin Leuven <e.leuven@uva.nl>
        * Format incremented to 391 (r34598)
          Added support for decimal alignment in tables.

2010-05-25 Pavel Sanda <sanda@lyx.org>
        * Format incremented to 390: support for ouput sync (forward/reverse)
        search. New boolean \forward_search and string \forward_macro.

2010-05-24 Richard Heck <rgheck@comcast.net>
        * Format incremented to 389: remove quotes from html_latex_* params.

2010-05-18 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 388: support for page sizes A0-3, A6, B0-3, B6
          and JIS B0-6

2010-04-21 Richard heck <rgheck@comcast.net>
        * Format incremented to 387: New options for XHTML math output.
          New BufferParams: html_math_img_scale, html_latex_start,
          html_latex_end.

2010-04-17 Richard heck <rgheck@comcast.net>
        * Format incremented to 386: LyX version for InsetInfo:
          new parameters: type  "lyxinfo", arg   "version".

2010-04-08 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 385: support to change the background color
          for shaded boxes: new buffer parameter \boxbgcolor

2010-04-03 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 384: support to specify a document-wide
          font color: new buffer parameter \fontcolor

2010-03-31 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 383: support for Turkmen

2010-03-31 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 382: support to change the font color
          for greyed-out notes: new buffer parameter \notefontcolor

2010-03-28: Vincent van Ravesteijn <vfr@lyx.org>
        * Format incremented to 381: support for new parameters
          for \xymatrix: \xymatrix@!0, \xymatrix!R and \xymatrix!C.

2010-03-28: Vincent van Ravesteijn <vfr@lyx.org>
        * Format incremented to 380: introduction of InsetPreview.
        
2010-03-18: Richard Heck <rgheck@comcast.net>
        * Format incremented to 379: revise format 374
          Replace boolean \html_use_mathml with \html_math_output,
          which at the moment can be: MathML, HTML, Images, or LaTeX.

2010-02-12 Pavel Sanda <sanda@lyx.org>
        * Format incremented to 378: support for revision InsetInfo.
          Various "vcs-*" strings could be argument of arg parameter
          in InsetInfo. This entry is a safety measure, no lyx2lyx
          conversion is needed in fact.

2010-02-11 Uwe Stöhr <uwestoehr@web.de> and Edwin Leuven <e.leuven@uva.nl>
        * Format incremented to 377: support for multirow cells in
          tables

2010-01-10 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 376: new buffer param
          \maintain_unincluded_children. If true, the aux files of
          non-included children (with \includeonly) are updated to
          keep the counters and refs correct.

2010-01-06 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 375: add support for \includeonly
          This adds a new buffer param list of relative filenames
          which are output as \includeonly arguments, like this:
          \begin_includeonly
          child1.lyx
          child2.lyx
          \end_includeonly

2009-12-30 Richard Heck <rgheck@comcast.net>
        * Format incremented to 374: add html output options.
                \html_use_mathml (boolean): whether to use MathML or images
                \html_be_strict (boolean): whether to be XHTML 1.1 compliant

2009-12-07 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 373: merge g-brief-de and g-brief-en
          classes into one g-brief class.
          All German layout names are replaced by English ones, the
          two classes are renamed to g-brief.

2009-11-29 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 372: new buffer param fontencoding.
          This param holds a buffer-specific fontencoding (argument
          of the fontenc package).
          Possible values:
          - global: use lyxrc.fontenc [this is the default]
          - default: do not load the fontenc package at all
          - <ENC>: real encodings such as "T1". Multiple encodings
            can be separated by comma.

2009-11-11 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 371: add option to suppress the LaTeX
          package mhchem.

2009-07-20 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 370: introduce a document option to
          suppress the default date.

2009-07-22 Vincent van Ravesteijn <vfr@lyx.org>
        * Format incremented to 369: add the author ids to the list of
          authors and let the numbering start with 1 in stead of 0.     

2009-07-21 Jürgen Spitzmüller <spitz@lyx.org>, Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 368: allow to use glue lengths for
          horizontal spaces.
          We just revert hspaces with glue lengths to ERT, since the
          inset didn't support them prior to format 368.
          No explicit conversion.

2009-07-20 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 367: allow to use percent lengths for
          vertical and horizontal spaces.

2009-07-20 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 366: allow to use percent lengths for the
          paragraph skip separation.

2009-07-19 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 365: support for paragraph indentation.

2009-07-13 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 364: add \filename_suffix parameter
          to branches.
          Possible values: 0, 1.
          If "1", the branch name is appended to the filename on export
          (e.g., <filename>-<suffix>.pdf).

2009-07-11 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 363: support for horizontal longtable
          alignment.
  
2009-06-11 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 362: support for the applemac encoding.

2009-05-25 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 361: support for custom setting of
          bibliography (longest) label width.
          Empty file format change.

2009-05-22 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 360: param width for nomencl_print
        CommandInset. This
        1.) adds a further value "width" to param set_width
        (see format 359)
        and
        2.) a param width, which takes a length
        If "width" is chosen, we define the indendation of the nomencl
        list via the optional argument of \printnomenclature, e.g.
        \printnomenclature[2cm]{}

2009-05-22 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 359: param set_width for nomencl_print
        CommandInset. This specifies how wide the longest nomencl label
        is (i.e., how wide the indendation in the nomencl list is).
        Possible values:
        - none: do not specifiy the width (use predefined values)
        - auto: compute the widest label and specify via
          \settowidth{\nomlabelwidth}{<widest label>}

2009-05-22 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 358: support for custom bibtex and
          makeindex commands.

2009-05-05 Pavel Sanda <sanda@lyx.org>, Enrico Forestieri <forenr@lyx.org>
        * Format incremented to 357: Change of the latex output for
          underline from \underbar to ulem's \uline.

2009-05-05 Pavel Sanda <sanda@lyx.org>
        * Format incremented to 356: support for double and wave underline
          character styles via ulem's \uuline and \uwave

2009-05-03 Pavel Sanda <sanda@lyx.org>
        * Format incremented to 355: support for strikeout character
          style via ulem's \sout

2009-04-26 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 354: support for splitindex's
          \printindex* and \printsubindex*.

2009-04-26 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 353: support for splitindex's
          \printsubindex.

2009-04-15 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 352: splitindex support.

2009-04-11 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 351: support to set a page background
          color.

2009-04-06 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 350: new param \default_output_format.

2009-04-05 Jürgen Spitzmüller <spitz@lyx.org>
        * Format incremented to 349: initial support for XeTeX.

2009-01-30 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 348: support for \*phantom.

2009-01-03 Vincent van Ravesteijn <V.F.vanRavesteijn@tudelft.nl>
        * Format incremented to 347: support for tabular valign.

2008-11-28 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 346: support for German (Switzerland):
          (bug 5450)

2008-11-07 José Matos <jamatos@lyx.org>
        * Format incremented to 345: for docbook backend CharStyle: -> Element:
          (fix bug 5411)

2008-10-12 Pavel Sanda <sanda@lyx.org>
        * Format incremented to 344: sanitize backreference settings
          for hyperref (fix bug 5340).

2008-10-12 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 343: new param \use_default_options
          (fix bug 2114).

2008-10-12 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 342: support for Mongolian.

2008-09-30 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 341: support for TABs in listings.

2008-08-01 José Matos <jamatos@fc.up.pt>
        * Format incremented to 340: move empty layouts to "Plain Layout".

2008-07-28 Richard Heck <rgheck@brown.edu>
        * Format incremented to 339: removal of default modules.

2008-06-21 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 338: support for polytonic Greek.

2008-06-13 Abdelrazak Younes <younes@lyx.org>
        * Format incremented to 337: convert/revert graphics display param.

2008-06-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 336: new param \font_cjk.

2008-05-30 Richard Heck <rgheck@brown.edu>
        * Format incremented to 335: fixes for InsetSpace problems.

2008-05-16 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 334: fix for bug 4868.

2008-05-09 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 333: fixes in the APA layout.

2008-05-06 Pavel Sanda <sanda@lyx.org>
        * Format incremented to 332: Added groupId for graphics insets.

2008-25-04 Helge Hafting <helge.hafting@aitel.hist.no>
        * Format incremented to 330: More horizontal fills
          - \leftarrowfill, \rightarrowfill
          - \upbracefill, \downbracefill

2008-04-28 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 329: new param \master.

2008-04-18 Bo Peng <ben.bob@gmail.com>
        * Format incremented to 328: Revert the support for embedding

2008-04-16 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 327: support for Mexican Spanish.

2008-04-11 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 326: support for pdflatex via external inset.

2008-03-29 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 325: merge the two Japanese languages to one that is
          encoding independent.

2008-03-25 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 324: merge the two newline insets.

2008-03-25 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 323: merge the diverse newpage insets.

2008-03-24 Richard Heck <rgheck@comcast.net>
        * Format incremented to 322: local layout

2008-03-18 Edwin Leuven <e.leuven@uva.nl>
        * Format incremented to 321: drop row/col lines and ensure
          consistency between cell and row/col lines.
          Make the separation between \begin_inset and Tabular a
          single space (it used to be a double space for lyx < 1.4)

2008-03-18 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 320: support for protected horizontal fill
          (\hspace*{\fill})

2008-03-10 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 319: hspace and extended hfill support

2008-03-09 Bo Peng <ben.bob@gmail.com>
        * Format incremented to 318: add \extra_embedded_files to buffer params

2008-03-02 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 317: support floating placements for wrap floats

2008-03-02 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 316: support for subfloats (subfig package)

2008-02-18 Richard Heck <rgheck@comcast.net>
        * Format incremented to 315: support for column separation in page margins

2008-02-03 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 314: adapt scrlttr2 class for serial letters

2008-01-12 Richard Heck <rgheck@comcast.net>
        * Format incremented to 313: change in how modules are represented

2008-01-11 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 312: support for sidewaysalgorithm (rotfloat)
          and wide sideways{figure,table}.

2008-01-10 Richard Heck <rgheck@comcast.net>
        * Format incremented to 311: dummy format to drive the AMS conversion

2007-12-28 Bernhard Reiter <ockham@gmx.net>
        * Format incremented to 310: support for \nocite{*}

2007-12-11 Bernhard Reiter <ockham@gmx.net>
        * Format incremented to 309: support for \nocite

2007-12-15 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 308: support for Serbian (Latin)

2007-12-05 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 307: support for \slash and \nobreakdash

2007-12-05 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 306: support for Interlingua

2007-12-05 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 305: support for Bahasa Malaysia

2007-12-03 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
        * Format incremented to 304: framed and shaded boxes are now real boxes
          (not notes).

2007-11-25 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 303: remove Serbocroatian as this was not a real
          babel language (Croatian was used instead in the background)
        * Implement Serbian

2007-11-25 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 302: support for Latin and North Sami

2007-11-24 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 301: support for \linebreak

2007-11-23 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 300: support for \pagebreak

2007-11-01 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 299: support for hyperlink types

2007-11-01 Stefan Schimanski <sts@1stein.org>
        * Format incremented to 298: math-macro code has been rewritten,
          now it supports definitions with optional parameters

2007-10-29 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 297: support for Albanian, lower Sorbian,
          fixed upper Sorbian language

2007-10-23 Richard Heck <rgheck@comcast.net>
        * Format incremented to 296: InsetInclude becomes an InsetCommand

2007-10-12 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 295: get rid of the htmlurl command that was
          needed for docbook, add the option to create a hyperlink instead

2007-10-12 Pavel Sanda <ps@twin.jikos.cz>
        * Format incremented to 294: PDFOptions: add usetitle,
          fix leftovers

2007-10-11 Bo Peng <ben.bob@gmail.com>
        * Format incremented to 293: Add InsetInfo.

2007-10-09 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 292: Support for Japanese without
          using CJK and inputenc. (japanese-plain)

2007-10-04 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 291: Support for Vietnamese.

2007-10-03 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 290: Add table wrap floats

2007-10-03 Martin Vermeer <martin.vermeer@tkk.fi>
        * Format incremented to 289: make Index a collapsable inset.

2007-09-25 Richard Heck <rgheck@comcast.net>
        * Format incremented to 288: Change how command insets are
          represented in LyX files.

2007-09-24 Uwe Stöhr <uwestoehr@web.de>
        * Format incremented to 287: Add missing optional parameters
          for wrapped figures.

2007-09-21 Pavel Sanda <ps@twin.jikos.cz>
        * Format incremented to 286: LyX now supports hyperref and some
          of its options.

2007-09-11 Bo Peng <ben.bob@gmail.com>
        * Format incremented to 285: Tweaks to embedded file format
          Remove inzip parameter from graphics insets.

2007-09-09 Helge Hafting <helge.hafting@aitel.hist.no>
        * Format incremented to 284: LyX now implements wrapped figures
          using wrapfig.sty instead of floatflt.sty. The latter
          is rather buggy, the former also has more options.
          No conversion as the .lyx doesn't change.
          The .tex export is slightly different, necessitating the
          format increase.

2007-09-08 Martin Vermeer <martin.vermeer@tkk.fi>

        * format incremented to 283: CharStyle insets are now
          called Flex.

2007-08-31 Bo Peng <ben.bob@gmail.com>

        * format incremented to 282: lyx files can be zipfiles with
          embedded documents.

2007-08-29 Richard Heck <rgheck@comcast.net>

        * format incremented to 281: allow modules for layout files

2007-08-17 Martin Vermeer <martin.vermeer@tkk.fi>

        * format incremented to 280: the show_label parameter
          is depreciated in favour of (Collapsable) status.

2007-08-17 Martin Vermeer <martin.vermeer@tkk.fi>

        * format incremented to 279: CharStyle names are now
          expected to be of form CharStyle:Name.

2007-08-12 José Matos <jamatos@fc.up.pt>

        * format incremented to 278: Close begin_deeper with a
          corresponding end_deeper (the only case where it matters is
          at the end of the body).

2007-08-12 José Matos <jamatos@fc.up.pt>

        * format incremented to 277: lyx is able to create invalid
          table where a multicolumn does not have a first cell
          (required by the table file format)

2007-07-20 Dov Feldstern <dov@lyx.org>

        * format *not* incremented; fixed format 249 conversion, so that it now
                correctly deals with encodings in footnotes (part of bug 3613)

2007-06-26 Uwe Stöhr <uwestoehr@web.de> and Dov Feldstern <dov@lyx.org>

        * format incremented to 276: switching exsting language 'arabic' to
                'arabic_arabtex'; this is to differentiate from the new arabic support
                using the arabi package.

2007-05-04  Jürgen Spitzmüller  <j.spitzmueller@gmx.de>

        * format incremented to 275: add graphics params scaleBeforeRotation
        (fix bug 1749).

2007-06-13 Dov Feldstern <dov@lyx.org>
        * format incremented to 274: applying the conversion done in format 259
                to the \lang property, which was forgotten back then... This is
                slightly more complicated, because the default language has to be
                determined on a per-paragraph basis.

2007-06-13 Bo Peng <ben.bob@gmail.com>
        * format incremented to 273: add --Separator-- environment to
                separate consecutive environments

2007-06-13 Bo Peng <bpeng@lyx.org>
        * format incremented to 272: convert listings to ERT because
                earlier versions of lyx can not handle unrecognizable
                listings parameters.

2007-05-15 José Matos <jamatos@lyx.org>
        * format incremented to 271: extended textclasses accept the
        normal font sizes: 10, 11 and 12pt.

2007-05-14 Martin Vermeer <martin.vermeer@tkk.fi>
        * format incremented to 270: support beamer \alert, \structure

2007-05-08 Bo Peng <ben.bob@gmail.com>
        * format incremented to 269: add listings support
        - add preamble flag \listings_params, e.g. \listings_params "language=Python,float"
        - add inset listings, with options lstparams and inline, e.g.
                \begin_inset listings
                lstparams "xleftmargin=50pt,language=Python"
                inline false
        - add \lstinputlisting Include type. e.g.
                \begin_inset Include \lstinputlisting{newfile1.lyx}[firstline=10,lastline=15]

2007-05-06 Uwe Stöhr  <uwestoehr@web.de>

        * format incremented to 268: add support for the CJK encodings
        - all encodings supported by CJK.sty are now in lib/encodings
        - lib/encoding has got two new flags:
          - encoding package:
            "inputenc" for those languages that use the inputenc-package and
            "CJK" for the CJK encodings
          - "fixed"/"variable" to divide between multi- or single-byte encoding
        - lib/languages allows now to set an empty language for babel
          in this case babel isn't called.

2007-05-04  Jürgen Spitzmüller  <j.spitzmueller@gmx.de>

        * format incremented to 267: add plain utf8 encoding (for XeTeX).

2007-04-29  Uwe Stöhr  <uwestoehr@web.de>

        * format incremented to 266:
        Support for the Armenian language

2007-04-26  Uwe Stöhr  <uwestoehr@web.de>

        * format incremented to 265: fix LyX's table border line handling
        With the fix (see bug 1746) LyX now takes care if the user has entered
        a "|" character in the argument field of tables. Therefore the "|"
        character has to be removed when also a table border is set.

2007-04-24  José Matos  <jamatos@lyx.org>

        * format incremented to 264:
        textclass cv is renamed simplecv

2007-02-22  José Matos  <jamatos@lyx.org>

        * format incremented to 263: changes in the language names (overdue):
          brazil -> brazilian
          portuges -> portuguese

2007-02-16  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 262: Allow ascii \inputencoding

2007-02-14  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 261: \output_changes is now considered
        even if \tracking_changes is false. This allows to output existing
        changes even if future changes are not tracked anymore.
        The old combination

        \tracking_changes false
        \output_changes true

        is therefore converted to

        \tracking_changes false
        \output_changes false

        on upgrade. Nothing is done on downgrade since the new behaviour is
        not supported in older formats.

2007-02-13  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 260: Allow utf8x \inputencoding

2007-02-12  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 259:
        Old: Spaces at start or end of font changes were output outside of
             the font change, i.e. not 'xx\textbf{ yy }zz', but
             'xx \textbf{yy} zz'.
        New: Spaces are always output with the font set by the user.

2007-01-31  Uwe Stöhr  <uwestoehr@web.de>

        * format incremented to 258: new \lyxline definition
        Old:
                \\newcommand{\\lyxline}[1]{
                  {#1 \\vspace{1ex} \\hrule width \\columnwidth \\vspace{1ex}}
                }
        New:
                \\newcommand{\\lyxline}[1][1pt]{%
                  \\par\\noindent%
                  \\rule[.5ex]{\\linewidth}{#1}\\par}
        The new definition is more robust, see bug 1988 and now really takes care of
        the fontsize: \lyxline{\Huge} produces now a thicker line than \lyxline{\normalfont}

2007-01-29  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 257: Caption styles have been replaced by
        InsetCaption. This is at the same time also a layout file format
        change to format 3. layout2layout removes caption layouts from old
        styles.
        Note that InsetCaption did exist before this format, but was never
        used. Old files containing do nevertheless still work.
        Of course users can still define a Caption style in layout files,
        but the special treatment in LyX is gone (apart from the sensitive
        label property).

2006-12-22  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 256: allow some new inputenc settings.
        For the complete list, see lib/lyx2lyx/lyx_1_5.py.

2006-11-25  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 255: new insets for \clearpage and
        \cleardoublepage. They are written inline to the file, exactly like
        \newpage.

2006-11-13  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 254: new header parameter \use_esint.
        It can have the same values as \use_amsmath: 0 (off), 1 (auto) and
        2 (on).

2006-10-18  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 253: new nomenclature and printnomenclature
        insets. These are standard InsetCommand with the following parameters:
        \nomenclature[prefix]{symbol}{description}
        \printnomenclature[labelwidth]

2006-10-15  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 252: changed command inset syntax

        Old:

        \begin_inset LatexCommand \cmdname[opt1][opt2]{arg}
        preview true
        \end_inset

        and

        \bibitem [opt1]{arg}


        New:

        \begin_inset LatexCommand cmdname
        name1 "opt1"
        name2 "opt2"
        name3 "arg"
        preview true
        \end_inset

        The order of the parameters and for each parameter the name and
        optional/required bit is now stored in InsetCommandParams.

2006-10-03  Jürgen Spitzmüller  <j.spitzmueller@gmx.de>

        * format incremented to 251: save show_label param for charstyles.

        On revert, the show_label param is just removed. Nothing to convert.

2006-10-12  Martin Vermeer <martin.vermeer@hut.fi>

        * Format incremented to 250: allow optional arg to environments

        No material format change. Now optargs for environments are allowed
        to be specified in layout files and will be handled properly. When
        converted back to older formats, they will be ignored in LaTeX
        output.

2006-08-14  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 249: Unicode

        LyX documents are now always encoded in utf8. The value of
        \inputencoding does now only determine the encoding of the created
        LaTeX file.
        Up to format 248 the value of \inputencoding did also determine the
        encoding of the LyX file:

        \inputencoding       LyX file encoding
        auto                 as determined by the document and character
                             languages
        default              ditto
        everything else      as determined by \inputencoding

        The difference between auto and default is only the LaTeX output:
        auto causes loading of the inputenc package, default does not.

2006-07-03  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 248: Basic booktabs support

        The <features> tag has a new switch: booktabs="true|false".
        An absent switch is equivalent to booktabs="false".
        Horizontal lines are set with the booktabs package if this switch
        is on.

        The <row> tag of tabulars has the following new attributes:
        topspace, bottomspace and interlinespace. All take a LyXLength
        as value, or the special keyword "default".

2006-06-10  Jürgen Spitzmüller  <j.spitzmueller@gmx.de>

        * format incremented to 247. The Grand Font Interface Rewrite.
        (1) Split font selection to rm, sf, tt:
                \fontscheme -> \font_roman, \font_sans, \font_typewriter
                Change 246->247:
                        \fontscheme     \font_roman     \font_sans      \font_typewriter
                        default         default         default         default
                        ae              ae              default         default
                        times           times           default         default
                        palatino        palatino        default         default
                        helvet          default         helvet          default
                        avant           default         avant           default
                        newcent         newcent         default         default
                        bookman         bookman         default         default
                        pslatex         times           (or \usepackage{pslatex})
                New 246->247:
                        \font_roman: cmr (-> \renewcommand{\rmdefault}{cmr}),
                                     lmodern, charter, utopia, ccfonts, chancery, beraserif
                                        (-> \usepackage{<name>})
                        \font_sans: cmss, lmss, cmbr
                                        (-> \renewcommand{\sfdefault}{<name>})
                                    berasans (-> \usepackage{<name>})
                        \font_typewriter: cmtt, lmtt, cmtl,
                                        (-> \renewcommand{\sfdefault}{<name>})
                                        courier, luximono, beramono
                                        (-> \usepackage{<name>})
        (2) New param \font_default_family (rmdefault, sfdefault, ttdefault)
        (3) New param \font_sc (true, false).
        (4) New param \font_osf (true, false).
        (5) New param \font_sf_scale (float)
        (6) New param \font_tt_scale (float)
        Support for the following fonts has been added:
                bera, ccfonts, chancery, charter, cmbright, computer modern (explicitely),
                courier, lmodern, luximono, utopia.
        Support for the following font has been removed:
                pslatex (it's superseded by mathptmx (times)).

2006-06-03  Martin Vermeer  <martin.vermeer@hut.fi>

        * format incremented to 246. The framed.sty package is
        now supported with note types framed and shaded.

2005-10-12  Jürgen Spitzmüller  <j.spitzmueller@gmx.de>

        * format incremented to 245. The \quotes_times parameter
        has been removed.

2005-09-24  Jürgen Spitzmüller  <j.spitzmueller@gmx.de>

        * format incremented to 244. Rename '\InsetSpace \,'
        to '\InsetSpace \thinspace{}', because the comma was
        not parsed by lyxlex, and '\InsetSpace \space' to
        '\InsetSpace \space{}' in favour of consistency.

2005-07-18  José Matos  <jamatos@lyx.org>

        * format incremented to 243.

        * this change only affects the preamble, the paperpackage
          option was removed and papersize is changed to default.

2005-06-21  Jean-Marc Lasgouttes  <lasgouttes@lyx.org>

        * format incremented to 242. There is no file format per
        se, but the "frenchb" language has been removed from lib/language
        and has to be translated to "french" by lyx2lyx.

2005-02-03  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 241.

        All following changes apply only to text in ERT insets. The
        rationale is that text in ERT is simply ASCII text, and nothing more.

        * paragraph breaks are now a single newline in latex and not a
        paragraph break anymore (bug 698).
        * \newline is not allowed anymore, because it is redundant (see above)
        * layouts other than Standard, paragraph parameters and font changes
        are not allowed anymore. They never made sense and were ignored for
        latex output, but now they can't be read or set anymore (bug 922).


2005-01-23  Jürgen Spitzmüller  <j.spitzmüller@gmx.de>

        * format incremented to 240.
        * new bufferparam:
                \output_changes {true|false}
        (should the change tracking marks be visible in the output or not?)
        * lyx2lyx should just delete the param in 239.

2005-01-06  José Matos  <jamatos@lyx.org>

        * format incremented to 239.
        * the paragraph parameters are displayed in their own line. This
        change is consistent with the insets behaviour, and corresponds
        to a more uniform treatment of the paragraphs since some of them
        had already their own line.

        An example of a single paragraph follows:

\begin_layout Standard
\paragraph_spacing single
\align left
Paragraph text.
\end_layout


2004-12-03  José Matos  <jamatos@lyx.org>

        * format incremented to 238.
        * The compatibility code to read old latex accents from 0.12.x in
        InsetLatexAccent::checkContents has been removed.
        The following translations are done:
                "\i \x"   -> "\i \x{}"
                "\i \xy"  -> "\i \x{y}"
                "\i \x y" -> "\i \x{y}"
                "\i \x\i" -> "\i \x{\i}"
                "\i \x\j" -> "\i \x{\j}"
        x is a latex accent command, y the base character. \, i and j are
        literal.
        lyx did these changes already from 0.12.x -> 215, but not lyx2lyx,
        so formats 215 - 237 can have both versions.


2004-10-10  José Matos  <jamatos@lyx.org>

        * format incremented to 237.
        * In the header, the following statments use now booleans values,
        instead of 0, 1:
                - \use_geometry
                - \use_bibtopic
                - \tracking_changes

2004-08-15  José Matos  <jamatos@lyx.org>

        * format incremented to 236.
        * Added tags:
                - \begin_document
                - \begin_header
                - \begin_body
                - \end_body

        * The options for \papersize are changed:
                Default -> default
                Custom -> custom
        * All whitespaces are removed at the end of lines, when
        not necessary. As an example we have all the lines in the header that
        do not belong to the preamble.

2004-07-01  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 235.
        * \paperpackage had an off-by-one error. Translation table:

          234: a4    a4wide  widemarginsa4
          235: none  a4      a4wide         widemarginsa4

          The "widemarginsa4" setting of 235 has no equivalent in 234.

2004-05-12  Angus Leeming  <leeming@lyx.org>

        * format incremented to 234.
        * the citation engine is specified explicitly rather than being
        deduced from 3 bools.

        \use_natbib 1
        \use_numerical_citations 0   ->   \cite_engine <style>
        \use_jurabib 0

        where <style> is one of "basic", "natbib_authoryear",
        "natbib_numerical" or "jurabib".

2004-04-29  Georg Baum  <Georg.Baum@post.rwth-aachen.de>

        * format incremented to 233.
        * insetgraphics does not allow filenames without extension anymore.
        The complete filename has to be given.

2004-03-29  Jürgen Spitzmüller  <j.spitzmueller@gmx.de>

        * format incremented to 232.

        * Support for bibtopic (sectioned bibliographies).
          - bufferparam \use_bibtopic [1|0]
          - the bibtex inset has a second argument for bibtopic's
            btPrint{Cited|NotCited|All} command:
            < 231:
            \begin_inset LatexCommand \bibtex[<style>]{<database>}
            now:
            \begin_inset LatexCommand \bibtex[<style>][<btPrintX>]{<database>}
          Forwards, there's nothing to be done. Backwards, \usepackage[dot]{bibtopic}
          has to be inserted to the preamble. Instead of the bibtex inset, the LaTeX
          \bibliographystyle{<style>}
          \begin{btSect}{<database>}
          \<btprintX>
          \end{btSect}
          has to be inserted.

2004-03-29  Jürgen Spitzmüller  <j.spitzmueller@gmx.de>

        * format incremented to 231.

        * Support for sidewaysfigure/sidewaystable (rotating package).
        insetfloat has now a param \sideways [true|false] (default is false).
        The param should be erased on downwards conversion, if it was true,
        the inset should be replaced by
        \begin{sidewaysfigure} <content> \end{sidewaysfigure}
        resp.
        \begin{sidewaystable} <content> \end{sidewaystable}
        i.e. ERT.

2004-02-23  Jürgen Spitzmüller  <j.spitzmueller@gmx.de>

        * format incremented to 230.

        * Support for a second optional argument in insetcommand.
        currently, citation uses this to support natbibs second
        optional argument \cite[before][after]{key}.
        I think there's nothing to convert upwards. Downwards, the
        commands with 2 optional args need to be converted to ERT.

        * Support for jurabib (param \use_jurabib [1|0], default is 0).
        When converting downwards, \usepackage{jurabib} has to be added
        to the preamble and, if babel is used, \usepackage{babel} before
        (jurabib fails if babel is called afterwards). If the natbib commands
        are used together with jurabib, they have to be converted to ERT too.

2003-12-29  Jürgen Spitzmüller  <j.spitzmueller@gmx.de>

        * format incremented to 229.
        * Minipages cannot be read anymore. All minipage insets will
        be converted to frameless box insets between 228->229.

2003-12-15  Angus Leeming  <leeming@lyx.org>

        * format incremented to 228.
        * Change the output of all insets derived from InsetCollapsable
        except for InsetERT (which has a similar output already), changing lines
        "collapsed true" -> "status collapsed"
        "collapsed false" -> "status open".
        * Change the output of InsetERT, changing lines
        "status Collapsed" -> "status collapsed"
        "status Open" -> "status open".
        "status Inlined" -> "status inlined".

2003-12-10  Angus Leeming  <leeming@lyx.org>

        * format NOT incremented.
        * add a 'draft' option to InsetExternal.

2003-12-10  Angus Leeming  <leeming@lyx.org>

        * format incremented to 227.
        * Change the output of InsetBox:
        \begin_inset Boxed -> \begin_inset Box Boxed
        \begin_inset Doublebox -> \begin_inset Box Doublebox
        \begin_inset Frameless -> \begin_inset Box Frameless
        \begin_inset ovalbox -> \begin_inset Box ovalbox
        \begin_inset Ovalbox -> \begin_inset Box Ovalbox
        \begin_inset Shadowbox -> \begin_inset Box Shadowbox

2003-12-10  Angus Leeming  <leeming@lyx.org>

        * format incremented to 226.
        * Change the output of InsetNote:
        \begin_inset Note -> \begin_inset Note Note
        \begin_inset Comment -> \begin_inset Note Comment
        \begin_inset Greyedout -> \begin_inset Note Greyedout

2003-11-28  André Pönitz

        * Remove space_above/space_below from Paragraph.
    This is now handled by InsetVSpace.

2003-10-07  Angus Leeming  <leeming@lyx.org>

        * Add transformations to InsetExternal

        boundingBox 0 0 20 20           the dimensions of the B.B..
                                        Output if the B.B. is not empty.
        clip                            clip the image to the B.B.
                                        Output if true.
        extra LaTeX "draft"             'extra' data passed to the primary
                                        command for this output format.
                                        (Possible formats LaTeX, PDFLaTeX,
                                         LinuxDoc, DocBook, Ascii.)
                                        The string can contain spaces and so
                                        is wrapped in "...".
        rotateAngle 30                  Rotation of the data.
                                        Output for non-zero rotation only.
        rotateOrigin bottomleft         Rotation origin.
                                        Output for non-zero rotation and
                                        non-default origin (center) only.
        scale 50
        width 2cm                       Output only if the image is resized.
        height 2cm
        keepAspectRatio

2003-10-07  Martin Vermeer  <martin.vermeer@hut.fi>

        * Added box inset. File format:

        \begin_inset Ovalbox            Boxed/Frameless/ovalbox/Ovalbox
                                            /Shadowbox/Doublebox
        position "b"                    t/c/b
        hor_pos "c"                     l/c/r/s
        has_inner_box 1                 1/0
        inner_pos "b"                   t/c/b/s
        use_parbox 0                    1/0
        width "100col%"                 unit+width-string
        special "none"                  none/height/depth
                                            /totalheight/width
        height "1in"                    unit+width-string
        height_special "totalheight"    none/height/depth
                                            /totalheight/width
        collapsed false                 true/false

        \begin_layout Standard

        <box contents>
        \end_layout

        \end_inset

        This box (Frameless, has_inner_box=1, use_parbox=0) replaces
        the pre-existing Minipage inset. Parameters translate as follows:
        position                        0/1/2   -> t/c/b
        inner_position                  0/1/2/3 -> inner_pos c/t/b/s
        height                          same
        width                           same
        collapsed                       same

2003-08-19  Michael Schmitt  <michael.schmitt@teststep.org>

        * attribute valignment="center" is replaced by valignment="middle"
        for tabular columns and cells

2003-08-17  Martin Vermeer  <martin.vermeer@hut.fi>

        * Added branch inset. File format:

        branch definition in the header:
        \branch <branchname>
        \selected 0                    0/1
        \color #rrggbb
        \end_branch

        \begin_inset Branch <branchname>
        collapsed false                 true/false

        \begin_layout Standard

        <branch contents>
        \end_layout

        \end_inset

2003-07-28  José Matos  <jamatos@lyx.org>

        * \the_end is replaced with \end_document

2003-07-28  José Matos  <jamatos@lyx.org>

        * \layout is replaced with \begin_layout

2003-07-28  José Matos  <jamatos@fep.up.pt>

        Format bumped to 225

        * All layouts finish now with \end_layout

2003-06-04  Angus Leeming  <leeming@lyx.org>

        Format bumped to 224

        * the storage of the external inset has been changed from

                \begin_inset External XFig,"file.fig",""

                \end_inset

        to this

                \begin_inset External
                        template XFig
                        filename file.fig
                        display <display_type>
                        lyxscale <scale>

                \end_inset

        throwing away the final arg (here "", more generally "<string>") that holds
        the parameters variable.
        Variables are output if present (filename) or different from the default
        values (display, lyxscale).

        Moreover, the RasterImage template has been scrapped. All RasterImage
        external insets are now converted to Graphics insets.

2003-05-20  Jürgen Spitzmüller  <j.spitzmueller@gmx.de>

        * Added new space insets:
                \SpecialChar ~ is now \InsetSpace ~
                ERT: "\ " could be converted to InsetSpace \<space>
                ERT: "\," could be converted to InsetSpace \,

2003-04-24  André Pönitz <poenitz@gmx.net>

        * Added eqref support:
        \begin_inset LatexCommand \eqref{label}

2003-03-14  Dekel Tsur

        * Format bumped to 223.

2003-03-12  John Levon  <levon@movementarian.org>

        * Added \\end_header to signify the end of the header in a
          more robust fashion.

        * use_amsmath is now a tristate {0 = never, 1 = auto, 2 = always}

2003-02-10  John Levon  <levon@movementarian.org>

        Format bumped to 222

        Added \\tracking_changes 0|1 to the header.

        Added \\author to the header. This can be present multiple
        times, and is of the form :

        \\author "Real Name" email@address.com

        Added \\change_deleted, \\change_inserted. Each of these does not
        span a paragraph, and is delimited by "\\change_unchanged\n". Both are
        of the form :

        \\change_inserted author time

        where author is an integer ID reference into the author list in
        the header, and time is time_t.

2002-10-24  Rob Lahaye  <lahaye@snu.ac.kr>

        * InsetGraphicsParams.h (scale): is now a float, not an unsigned int.

2002-08-22  Rob Lahaye <lahaye@snu.ac.kr>

New graphics dialog. With the removal of buttons in the dialog, also
keywords in the graphics inset went. The following keywords do not
exist anymore:
        lyxsize_kind
        lyxsize_type
        lyxwidth
        lyxheight
        size_kind
        size_type
        rotate

Only non-default values are saved to the lyx files. The defaults of the remaining
keywords are;
        filename <empty>
        lyxscale 100
        display default
        scale 100
        width <empty>
        height <empty>
        draft <off>
        noUnzip <off>
        BoundingBox <from file>
        clip <off>
        rotateAngle 0
        rotateOrigin centerBaseline
        subcaption <off>
        subcaptionText <empty>
        special <empty>

The remaining keywords have sufficient overlap with the old ones for a
smooth reading of the 1.2.x inset keywords in most common cases.

Compatibility is certainly broken for the old lyxwidth/lyxheight keywords.
They don't exist anymore and we can't translate them into a scaling value, while
we're reading the graphics inset. The old lyxwidth/lyxheight keyword and its
argument is ignored and lost.

Only few compatibility issues are left for lyx2lyx:

------------------------------------------------------------------------------
old-token                                   new-token         remove
------------------------------------------------------------------------------
size_kind original / size_type 0            scale 100         width <val>
                                                              height <val>
                                                              scale <val>

size_kind width_height / size_type 1            -             scale <val>

lyxsize_kind original / lyxsize_type 0      lyxscale 100      lyxscale <val>
------------------------------------------------------------------------------
[replace old-token by new-token, and remove any of subsequent tokens as listed]

If "rotate" is absent, lyx2lyx should ignore "rotateAngle <val>":
   if ( "rotateAngle <val>" is there WITHOUT being preceded by the keyword "rotate" )
   then
        replace "rotateAngle <val>" by "rotateAngle 0"


2002-08-12  Andre' Poenitz <poenitz@gmx.de>

Added \lyxlock for locked math inset when written to .lyx file.
When "downgrading" .lyx files this should simple be deleted but it
does not hurt at all if it stays in. It does not have to be added
when "upgrading".


2002-08-02  Angus Leeming  <leeming@lyx.org>

Added a boolean "preview" flag to InsetCommandParams.
Currently it is written only by InsetInclude, because only this
class can generate a preview of its contents.

The LyX file now contains:

 \begin_inset Include \input{snapshot_t=40.tex}
+preview true

 \end_inset

Earlier versions of LyX just swallow this extra token silently.

2002-08-12  Angus Leeming  <leeming@lyx.org>

The 1.2.0 InsetGraphicsParams "size_type" and "lyxsize_type" have been
renamed as "size_kind" and "lyxsize_kind" respectively.

 \begin_inset Graphics FormatVersion 1
        filename file.eps
        display default
-       size_kind original
+       size_type original
        width 7cm
        rotateOrigin center
-       lyxsize_kind original
+       lyxsize_type original
        lyxwidth 4cm

 \end_inset