1 LyX file-format changes
2 -----------------------
4 2007-09-09 Helge Hafting
5 * Format incremented to 284: LyX now implements wrapped figures
6 using wrapfig.sty instead of floatflt.sty. The latter
7 is rather buggy, the former also has more options.
8 No conversion as the .lyx doesn't change.
9 The .tex export is slightly different, necessitating the
12 2007-09-08 Martin Vermeer
14 * format incremented to 283: CharStyle insets are now
19 * format incremented to 282: lyx files can be zipfiles with
22 2007-08-29 Richard Heck
24 * format incremented to 281: allow modules for layout files.
26 2007-08-17 Martin Vermeer
28 * format incremented to 280: the show_label parameter
29 is depreciated in favour of (Collapsable) status.
31 2007-08-17 Martin Vermeer
33 * format incremented to 279: CharStyle names are now
34 expected to be of form CharStyle:Name.
38 * format incremented to 278: Close begin_deeper with a
39 corresponding end_deeper (the only case where it matters is
40 at the end of the body).
44 * format incremented to 277: lyx is able to create invalid
45 table where a multicolumn does not have a first cell
46 (required by the table file format)
48 2007-07-20 Dov Feldstern <dov@lyx.org>
50 * format *not* incremented; fixed format 249 conversion, so that it now
51 correctly deals with encodings in footnotes (part of bug 3613)
53 2007-06-26 Uwe Stöhr <uwestoehr@web.de> and Dov Feldstern <dov@lyx.org>
55 * format incremented to 276: switching exsting language 'arabic' to
56 'arabic_arabtex'; this is to differentiate from the new arabic support
57 using the arabi package.
59 2007-05-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
61 * format incremented to 275: add graphics params scaleBeforeRotation
64 2007-06-13 Dov Feldstern <dov@lyx.org>
65 * format incremented to 274: applying the conversion done in format 259
66 to the \lang property, which was forgotten back then... This is
67 slightly more complicated, because the default language has to be
68 determined on a per-paragraph basis.
70 2007-06-13 Bo Peng <ben.bob@gmail.com>
71 * format incremented to 273: add --Separator-- environment to
72 separate consecutive environments
74 2007-06-13 Bo Peng <bpeng@lyx.org>
75 * format incremented to 272: convert listings to ERT because
76 earlier versions of lyx can not handle unrecognizable
79 2007-05-15 José Matos <jamatos@lyx.org>
80 * format incremented to 271: extended textclasses accept the
81 normal font sizes: 10, 11 and 12pt.
83 2007-05-14 Martin Vermeer <martin.vermeer@tkk.fi>
84 * format incremented to 270: support beamer \alert, \structure
86 2007-05-08 Bo Peng <ben.bob@gmail.com>
87 * format incremented to 269: add listings support
88 - add preamble flag \listings_params, e.g. \listings_params "language=Python,float"
89 - add inset listings, with options lstparams and inline, e.g.
91 lstparams "xleftmargin=50pt,language=Python"
93 - add \lstinputlisting Include type. e.g.
94 \begin_inset Include \lstinputlisting{newfile1.lyx}[firstline=10,lastline=15]
96 2007-05-06 Uwe Stöhr <uwestoehr@web.de>
98 * format incremented to 268: add support for the CJK encodings
99 - all encodings supported by CJK.sty are now in lib/encodings
100 - lib/encoding has got two new flags:
102 "inputenc" for those languages that use the inputenc-package and
103 "CJK" for the CJK encodings
104 - "fixed"/"variable" to divide between multi- or single-byte encoding
105 - lib/languages allows now to set an empty language for babel
106 in this case babel isn't called.
108 2007-05-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
110 * format incremented to 267: add plain utf8 encoding (for XeTeX).
112 2007-04-29 Uwe Stöhr <uwestoehr@web.de>
114 * format incremented to 266:
115 Support for the Armenian language
117 2007-04-26 Uwe Stöhr <uwestoehr@web.de>
119 * format incremented to 265: fix LyX's table border line handling
120 With the fix (see bug 1746) LyX now takes care if the user has entered
121 a "|" character in the argument field of tables. Therefore the "|"
122 character has to be removed when also a table border is set.
124 2007-04-24 José Matos <jamatos@lyx.org>
126 * format incremented to 264:
127 textclass cv is renamed simplecv
129 2007-02-22 José Matos <jamatos@lyx.org>
131 * format incremented to 263: changes in the language names (overdue):
133 portuges -> portuguese
135 2007-02-16 Georg Baum <Georg.Baum@post.rwth-aachen.de>
137 * format incremented to 262: Allow ascii \inputencoding
139 2007-02-14 Georg Baum <Georg.Baum@post.rwth-aachen.de>
141 * format incremented to 261: \output_changes is now considered
142 even if \tracking_changes is false. This allows to output existing
143 changes even if future changes are not tracked anymore.
146 \tracking_changes false
149 is therefore converted to
151 \tracking_changes false
152 \output_changes false
154 on upgrade. Nothing is done on downgrade since the new behaviour is
155 not supported in older formats.
157 2007-02-13 Georg Baum <Georg.Baum@post.rwth-aachen.de>
159 * format incremented to 260: Allow utf8x \inputencoding
161 2007-02-12 Georg Baum <Georg.Baum@post.rwth-aachen.de>
163 * format incremented to 259:
164 Old: Spaces at start or end of font changes were output outside of
165 the font change, i.e. not 'xx\textbf{ yy }zz', but
167 New: Spaces are always output with the font set by the user.
169 2007-01-31 Uwe Stöhr <uwestoehr@web.de>
171 * format incremented to 258: new \lyxline definition
173 \\newcommand{\\lyxline}[1]{
174 {#1 \\vspace{1ex} \\hrule width \\columnwidth \\vspace{1ex}}
177 \\newcommand{\\lyxline}[1][1pt]{%
179 \\rule[.5ex]{\\linewidth}{#1}\\par}
180 The new definition is more robust, see bug 1988 and now really takes care about
181 the fontsize: \lyxline{\Huge} produces now a thicker line then \lyxline{\normalfont}
183 2007-01-29 Georg Baum <Georg.Baum@post.rwth-aachen.de>
185 * format incremented to 257: Caption styles have been replaced by
186 InsetCaption. This is at the same time also a layout file format
187 change to format 3. layout2layout removes caption layouts from old
189 Note that InsetCaption did exist before this format, but was never
190 used. Old files containing do nevertheless still work.
191 Of course users can still define a Caption style in layout files,
192 but the special treatment in LyX is gone (apart from the sensitive
195 2006-12-22 Georg Baum <Georg.Baum@post.rwth-aachen.de>
197 * format incremented to 256: allow some new inputenc settings.
198 For the complete list, see lib/lyx2lyx/lyx_1_5.py.
200 2006-11-25 Georg Baum <Georg.Baum@post.rwth-aachen.de>
202 * format incremented to 255: new insets for \clearpage and
203 \cleardoublepage. They are written inline to the file, exactly like
206 2006-11-13 Georg Baum <Georg.Baum@post.rwth-aachen.de>
208 * format incremented to 254: new header parameter \use_esint.
209 It can have the same values as \use_amsmath: 0 (off), 1 (auto) and
212 2006-10-18 Georg Baum <Georg.Baum@post.rwth-aachen.de>
214 * format incremented to 253: new nomenclature and printnomenclature
215 insets. These are standard InsetCommand with the following parameters:
216 \nomenclature[prefix]{symbol}{description}
217 \printnomenclature[labelwidth]
219 2006-10-15 Georg Baum <Georg.Baum@post.rwth-aachen.de>
221 * format incremented to 252: changed command inset syntax
225 \begin_inset LatexCommand \cmdname[opt1][opt2]{arg}
236 \begin_inset LatexCommand cmdname
243 The order of the parameters and for each parameter the name and
244 optional/required bit is now stored in InsetCommandParams.
246 2006-10-03 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
248 * format incremented to 251: save show_label param for charstyles.
250 On revert, the show_label param is just removed. Nothing to convert.
252 2006-10-12 Martin Vermeer <martin.vermeer@hut.fi>
254 * Format incremented to 250: allow optional arg to environments
256 No material format change. Now optargs for environments are allowed
257 to be specified in layout files and will be handled properly. When
258 converted back to older formats, they will be ignored in LaTeX
261 2006-08-14 Georg Baum <Georg.Baum@post.rwth-aachen.de>
263 * format incremented to 249: Unicode
265 LyX documents are now always encoded in utf8. The value of
266 \inputencoding does now only determine the encoding of the created
268 Up to format 248 the value of \inputencoding did also determine the
269 encoding of the LyX file:
271 \inputencoding LyX file encoding
272 auto as determined by the document and character
275 everything else as determined by \inputencoding
277 The difference between auto and default is only the LaTeX output:
278 auto causes loading of the inputenc package, default does not.
280 2006-07-03 Georg Baum <Georg.Baum@post.rwth-aachen.de>
282 * format incremented to 248: Basic booktabs support
284 The <features> tag has a new switch: booktabs="true|false".
285 An absent switch is equivalent to booktabs="false".
286 Horizontal lines are set with the booktabs package if this switch
289 The <row> tag of tabulars has the following new attributes:
290 topspace, bottomspace and interlinespace. All take a LyXLength
291 as value, or the special keyword "default".
293 2006-06-10 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
295 * format incremented to 247. The Grand Font Interface Rewrite.
296 (1) Split font selection to rm, sf, tt:
297 \fontscheme -> \font_roman, \font_sans, \font_typewriter
299 \fontscheme \font_roman \font_sans \font_typewriter
300 default default default default
301 ae ae default default
302 times times default default
303 palatino palatino default default
304 helvet default helvet default
305 avant default avant default
306 newcent newcent default default
307 bookman bookman default default
308 pslatex times (or \usepackage{pslatex})
310 \font_roman: cmr (-> \renewcommand{\rmdefault}{cmr}),
311 lmodern, charter, utopia, ccfonts, chancery, beraserif
312 (-> \usepackage{<name>})
313 \font_sans: cmss, lmss, cmbr
314 (-> \renewcommand{\sfdefault}{<name>})
315 berasans (-> \usepackage{<name>})
316 \font_typewriter: cmtt, lmtt, cmtl,
317 (-> \renewcommand{\sfdefault}{<name>})
318 courier, luximono, beramono
319 (-> \usepackage{<name>})
320 (2) New param \font_default_family (rmdefault, sfdefault, ttdefault)
321 (3) New param \font_sc (true, false).
322 (4) New param \font_osf (true, false).
323 (5) New param \font_sf_scale (float)
324 (6) New param \font_tt_scale (float)
325 Support for the following fonts has been added:
326 bera, ccfonts, chancery, charter, cmbright, computer modern (explicitely),
327 courier, lmodern, luximono, utopia.
328 Support for the following font has been removed:
329 pslatex (it's superseded by mathptmx (times)).
331 2006-06-03 Martin Vermeer <martin.vermeer@hut.fi>
333 * format incremented to 246. The framed.sty package is
334 now supported with note types framed and shaded.
336 2005-10-12 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
338 * format incremented to 245. The \quotes_times parameter
341 2005-09-24 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
343 * format incremented to 244. Rename '\InsetSpace \,'
344 to '\InsetSpace \thinspace{}', because the comma was
345 not parsed by lyxlex, and '\InsetSpace \space' to
346 '\InsetSpace \space{}' in favour of consistency.
348 2005-07-18 José Matos <jamatos@lyx.org>
350 * format incremented to 243.
352 * this change only affects the preamble, the paperpackage
353 option was removed and papersize is changed to default.
355 2005-06-21 Jean-Marc Lasgouttes <lasgouttes@lyx.org>
357 * format incremented to 242. There is no file format per
358 se, but the "frenchb" language has been removed from lib/language
359 and has to be translated to "french" by lyx2lyx.
361 2005-02-03 Georg Baum <Georg.Baum@post.rwth-aachen.de>
363 * format incremented to 241.
365 All following changes apply only to text in ERT insets. The
366 rationale is that text in ERT is simply ASCII text, and nothing more.
368 * paragraph breaks are now a single newline in latex and not a
369 paragraph break anymore (bug 698).
370 * \newline is not allowed anymore, because it is redundant (see above)
371 * layouts other than Standard, paragraph parameters and font changes
372 are not allowed anymore. They never made sense and were ignored for
373 latex output, but now they can't be read or set anymore (bug 922).
376 2005-01-23 Jürgen Spitzmüller <j.spitzmüller@gmx.de>
378 * format incremented to 240.
380 \output_changes {true|false}
381 (should the change tracking marks be visible in the output or not?)
382 * lyx2lyx should just delete the param in 239.
384 2005-01-06 José Matos <jamatos@lyx.org>
386 * format incremented to 239.
387 * the paragraph parameters are displayed in their own line. This
388 change is consistent with the insets behaviour, and corresponds
389 to a more uniform treatment of the paragraphs since some of them
390 had already their own line.
392 An example of a single paragraph follows:
394 \begin_layout Standard
395 \paragraph_spacing single
401 2004-12-03 José Matos <jamatos@lyx.org>
403 * format incremented to 238.
404 * The compatibility code to read old latex accents from 0.12.x in
405 InsetLatexAccent::checkContents has been removed.
406 The following translations are done:
408 "\i \xy" -> "\i \x{y}"
409 "\i \x y" -> "\i \x{y}"
410 "\i \x\i" -> "\i \x{\i}"
411 "\i \x\j" -> "\i \x{\j}"
412 x is a latex accent command, y the base character. \, i and j are
414 lyx did these changes already from 0.12.x -> 215, but not lyx2lyx,
415 so formats 215 - 237 can have both versions.
418 2004-10-10 José Matos <jamatos@lyx.org>
420 * format incremented to 237.
421 * In the header, the following statments use now booleans values,
427 2004-08-15 José Matos <jamatos@lyx.org>
429 * format incremented to 236.
436 * The options for \papersize are changed:
439 * All whitespaces are removed at the end of lines, when
440 not necessary. As an example we have all the lines in the header that
441 do not belong to the preamble.
443 2004-07-01 Georg Baum <Georg.Baum@post.rwth-aachen.de>
445 * format incremented to 235.
446 * \paperpackage had an off-by-one error. Translation table:
448 234: a4 a4wide widemarginsa4
449 235: none a4 a4wide widemarginsa4
451 The "widemarginsa4" setting of 235 has no equivalent in 234.
453 2004-05-12 Angus Leeming <leeming@lyx.org>
455 * format incremented to 234.
456 * the citation engine is specified explicitly rather than being
457 deduced from 3 bools.
460 \use_numerical_citations 0 -> \cite_engine <style>
463 where <style> is one of "basic", "natbib_authoryear",
464 "natbib_numerical" or "jurabib".
466 2004-04-29 Georg Baum <Georg.Baum@post.rwth-aachen.de>
468 * format incremented to 233.
469 * insetgraphics does not allow filenames without extension anymore.
470 The complete filename has to be given.
472 2004-03-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
474 * format incremented to 232.
476 * Support for bibtopic (sectioned bibliographies).
477 - bufferparam \use_bibtopic [1|0]
478 - the bibtex inset has a second argument for bibtopic's
479 btPrint{Cited|NotCited|All} command:
481 \begin_inset LatexCommand \bibtex[<style>]{<database>}
483 \begin_inset LatexCommand \bibtex[<style>][<btPrintX>]{<database>}
484 Forwards, there's nothing to be done. Backwards, \usepackage[dot]{bibtopic}
485 has to be inserted to the preamble. Instead of the bibtex inset, the LaTeX
486 \bibliographystyle{<style>}
487 \begin{btSect}{<database>}
492 2004-03-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
494 * format incremented to 231.
496 * Support for sidewaysfigure/sidewaystable (rotating package).
497 insetfloat has now a param \sideways [true|false] (default is false).
498 The param should be erased on downwards conversion, if it was true,
499 the inset should be replaced by
500 \begin{sidewaysfigure} <content> \end{sidewaysfigure}
502 \begin{sidewaystable} <content> \end{sidewaystable}
505 2004-02-23 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
507 * format incremented to 230.
509 * Support for a second optional argument in insetcommand.
510 currently, citation uses this to support natbibs second
511 optional argument \cite[before][after]{key}.
512 I think there's nothing to convert upwards. Downwards, the
513 commands with 2 optional args need to be converted to ERT.
515 * Support for jurabib (param \use_jurabib [1|0], default is 0).
516 When converting downwards, \usepackage{jurabib} has to be added
517 to the preamble and, if babel is used, \usepackage{babel} before
518 (jurabib fails if babel is called afterwards). If the natbib commands
519 are used together with jurabib, they have to be converted to ERT too.
521 2003-12-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
523 * format incremented to 229.
524 * Minipages cannot be read anymore. All minipage insets will
525 be converted to frameless box insets between 228->229.
527 2003-12-15 Angus Leeming <leeming@lyx.org>
529 * format incremented to 228.
530 * Change the output of all insets derived from InsetCollapsable
531 except for InsetERT (which has a similar output already), changing lines
532 "collapsed true" -> "status collapsed"
533 "collapsed false" -> "status open".
534 * Change the output of InsetERT, changing lines
535 "status Collapsed" -> "status collapsed"
536 "status Open" -> "status open".
537 "status Inlined" -> "status inlined".
539 2003-12-10 Angus Leeming <leeming@lyx.org>
541 * format NOT incremented.
542 * add a 'draft' option to InsetExternal.
544 2003-12-10 Angus Leeming <leeming@lyx.org>
546 * format incremented to 227.
547 * Change the output of InsetBox:
548 \begin_inset Boxed -> \begin_inset Box Boxed
549 \begin_inset Doublebox -> \begin_inset Box Doublebox
550 \begin_inset Frameless -> \begin_inset Box Frameless
551 \begin_inset ovalbox -> \begin_inset Box ovalbox
552 \begin_inset Ovalbox -> \begin_inset Box Ovalbox
553 \begin_inset Shadowbox -> \begin_inset Box Shadowbox
555 2003-12-10 Angus Leeming <leeming@lyx.org>
557 * format incremented to 226.
558 * Change the output of InsetNote:
559 \begin_inset Note -> \begin_inset Note Note
560 \begin_inset Comment -> \begin_inset Note Comment
561 \begin_inset Greyedout -> \begin_inset Note Greyedout
563 2003-11-28 André Pönitz
565 * Remove space_above/space_below from Paragraph.
566 This is now handled by InsetVSpace.
568 2003-10-07 Angus Leeming <leeming@lyx.org>
570 * Add transformations to InsetExternal
572 boundingBox 0 0 20 20 the dimensions of the B.B..
573 Output if the B.B. is not empty.
574 clip clip the image to the B.B.
576 extra LaTeX "draft" 'extra' data passed to the primary
577 command for this output format.
578 (Possible formats LaTeX, PDFLaTeX,
579 LinuxDoc, DocBook, Ascii.)
580 The string can contain spaces and so
582 rotateAngle 30 Rotation of the data.
583 Output for non-zero rotation only.
584 rotateOrigin bottomleft Rotation origin.
585 Output for non-zero rotation and
586 non-default origin (center) only.
588 width 2cm Output only if the image is resized.
592 2003-10-07 Martin Vermeer <martin.vermeer@hut.fi>
594 * Added box inset. File format:
596 \begin_inset Ovalbox Boxed/Frameless/ovalbox/Ovalbox
601 inner_pos "b" t/c/b/s
603 width "100col%" unit+width-string
604 special "none" none/height/depth
606 height "1in" unit+width-string
607 height_special "totalheight" none/height/depth
609 collapsed false true/false
611 \begin_layout Standard
618 This box (Frameless, has_inner_box=1, use_parbox=0) replaces
619 the pre-existing Minipage inset. Parameters translate as follows:
620 position 0/1/2 -> t/c/b
621 inner_position 0/1/2/3 -> inner_pos c/t/b/s
626 2003-08-19 Michael Schmitt <michael.schmitt@teststep.org>
628 * attribute valignment="center" is replaced by valignment="middle"
629 for tabular columns and cells
631 2003-08-17 Martin Vermeer <martin.vermeer@hut.fi>
633 * Added branch inset. File format:
635 branch definition in the header:
641 \begin_inset Branch <branchname>
642 collapsed false true/false
644 \begin_layout Standard
651 2003-07-28 José Matos <jamatos@lyx.org>
653 * \the_end is replaced with \end_document
655 2003-07-28 José Matos <jamatos@lyx.org>
657 * \layout is replaced with \begin_layout
659 2003-07-28 José Matos <jamatos@fep.up.pt>
663 * All layouts finish now with \end_layout
665 2003-06-04 Angus Leeming <leeming@lyx.org>
669 * the storage of the external inset has been changed from
671 \begin_inset External XFig,"file.fig",""
677 \begin_inset External
680 display <display_type>
685 throwing away the final arg (here "", more generally "<string>") that holds
686 the parameters variable.
687 Variables are output if present (filename) or different from the default
688 values (display, lyxscale).
690 Moreover, the RasterImage template has been scrapped. All RasterImage
691 external insets are now converted to Graphics insets.
693 2003-05-20 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
695 * Added new space insets:
696 \SpecialChar ~ is now \InsetSpace ~
697 ERT: "\ " could be converted to InsetSpace \<space>
698 ERT: "\," could be converted to InsetSpace \,
700 2003-04-24 André Pönitz <poenitz@gmx.net>
702 * Added eqref support:
703 \begin_inset LatexCommand \eqref{label}
705 2003-03-14 Dekel Tsur
707 * Format bumped to 223.
709 2003-03-12 John Levon <levon@movementarian.org>
711 * Added \\end_header to signify the end of the header in a
714 * use_amsmath is now a tristate {0 = never, 1 = auto, 2 = always}
716 2003-02-10 John Levon <levon@movementarian.org>
720 Added \\tracking_changes 0|1 to the header.
722 Added \\author to the header. This can be present multiple
723 times, and is of the form :
725 \\author "Real Name" email@address.com
727 Added \\change_deleted, \\change_inserted. Each of these does not
728 span a paragraph, and is delimited by "\\change_unchanged\n". Both are
731 \\change_inserted author time
733 where author is an integer ID reference into the author list in
734 the header, and time is time_t.
736 2002-10-24 Rob Lahaye <lahaye@snu.ac.kr>
738 * InsetGraphicsParams.h (scale): is now a float, not an unsigned int.
740 2002-08-22 Rob Lahaye <lahaye@snu.ac.kr>
742 New graphics dialog. With the removal of buttons in the dialog, also
743 keywords in the graphics inset went. The following keywords do not
753 Only non-default values are saved to the lyx files. The defaults of the remaining
763 BoundingBox <from file>
766 rotateOrigin centerBaseline
768 subcaptionText <empty>
771 The remaining keywords have sufficient overlap with the old ones for a
772 smooth reading of the 1.2.x inset keywords in most common cases.
774 Compatibility is certainly broken for the old lyxwidth/lyxheight keywords.
775 They don't exist anymore and we can't translate them into a scaling value, while
776 we're reading the graphics inset. The old lyxwidth/lyxheight keyword and its
777 argument is ignored and lost.
779 Only few compatibility issues are left for lyx2lyx:
781 ------------------------------------------------------------------------------
782 old-token new-token remove
783 ------------------------------------------------------------------------------
784 size_kind original / size_type 0 scale 100 width <val>
788 size_kind width_height / size_type 1 - scale <val>
790 lyxsize_kind original / lyxsize_type 0 lyxscale 100 lyxscale <val>
791 ------------------------------------------------------------------------------
792 [replace old-token by new-token, and remove any of subsequent tokens as listed]
794 If "rotate" is absent, lyx2lyx should ignore "rotateAngle <val>":
795 if ( "rotateAngle <val>" is there WITHOUT being preceded by the keyword "rotate" )
797 replace "rotateAngle <val>" by "rotateAngle 0"
800 2002-08-12 Andre' Poenitz <poenitz@gmx.de>
802 Added \lyxlock for locked math inset when written to .lyx file.
803 When "downgrading" .lyx files this should simple be deleted but it
804 does not hurt at all if it stays in. It does not have to be added
808 2002-08-02 Angus Leeming <leeming@lyx.org>
810 Added a boolean "preview" flag to InsetCommandParams.
811 Currently it is written only by InsetInclude, because only this
812 class can generate a preview of its contents.
814 The LyX file now contains:
816 \begin_inset Include \input{snapshot_t=40.tex}
821 Earlier versions of LyX just swallow this extra token silently.
823 2002-08-12 Angus Leeming <leeming@lyx.org>
825 The 1.2.0 InsetGraphicsParams "size_type" and "lyxsize_type" have been
826 renamed as "size_kind" and "lyxsize_kind" respectively.
828 \begin_inset Graphics FormatVersion 1
835 - lyxsize_kind original
836 + lyxsize_type original