1 LyX file-format changes
2 -----------------------
6 * format incremented to 282: lyx files can be zipfiles with
9 2007-08-29 Richard Heck
11 * format incremented to 281: allow modules for layout files.
13 2007-08-17 Martin Vermeer
15 * format incremented to 280: the show_label parameter
16 is depreciated in favour of (Collapsable) status.
18 2007-08-17 Martin Vermeer
20 * format incremented to 279: CharStyle names are now
21 expected to be of form CharStyle:Name.
25 * format incremented to 278: Close begin_deeper with a
26 corresponding end_deeper (the only case where it matters is
27 at the end of the body).
31 * format incremented to 277: lyx is able to create invalid
32 table where a multicolumn does not have a first cell
33 (required by the table file format)
35 2007-07-20 Dov Feldstern <dov@lyx.org>
37 * format *not* incremented; fixed format 249 conversion, so that it now
38 correctly deals with encodings in footnotes (part of bug 3613)
40 2007-06-26 Uwe Stöhr <uwestoehr@web.de> and Dov Feldstern <dov@lyx.org>
42 * format incremented to 276: switching exsting language 'arabic' to
43 'arabic_arabtex'; this is to differentiate from the new arabic support
44 using the arabi package.
46 2007-05-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
48 * format incremented to 275: add graphics params scaleBeforeRotation
51 2007-06-13 Dov Feldstern <dov@lyx.org>
52 * format incremented to 274: applying the conversion done in format 259
53 to the \lang property, which was forgotten back then... This is
54 slightly more complicated, because the default language has to be
55 determined on a per-paragraph basis.
57 2007-06-13 Bo Peng <ben.bob@gmail.com>
58 * format incremented to 273: add --Separator-- environment to
59 separate consecutive environments
61 2007-06-13 Bo Peng <bpeng@lyx.org>
62 * format incremented to 272: convert listings to ERT because
63 earlier versions of lyx can not handle unrecognizable
66 2007-05-15 José Matos <jamatos@lyx.org>
67 * format incremented to 271: extended textclasses accept the
68 normal font sizes: 10, 11 and 12pt.
70 2007-05-14 Martin Vermeer <martin.vermeer@tkk.fi>
71 * format incremented to 270: support beamer \alert, \structure
73 2007-05-08 Bo Peng <ben.bob@gmail.com>
74 * format incremented to 269: add listings support
75 - add preamble flag \listings_params, e.g. \listings_params "language=Python,float"
76 - add inset listings, with options lstparams and inline, e.g.
78 lstparams "xleftmargin=50pt,language=Python"
80 - add \lstinputlisting Include type. e.g.
81 \begin_inset Include \lstinputlisting{newfile1.lyx}[firstline=10,lastline=15]
83 2007-05-06 Uwe Stöhr <uwestoehr@web.de>
85 * format incremented to 268: add support for the CJK encodings
86 - all encodings supported by CJK.sty are now in lib/encodings
87 - lib/encoding has got two new flags:
89 "inputenc" for those languages that use the inputenc-package and
90 "CJK" for the CJK encodings
91 - "fixed"/"variable" to divide between multi- or single-byte encoding
92 - lib/languages allows now to set an empty language for babel
93 in this case babel isn't called.
95 2007-05-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
97 * format incremented to 267: add plain utf8 encoding (for XeTeX).
99 2007-04-29 Uwe Stöhr <uwestoehr@web.de>
101 * format incremented to 266:
102 Support for the Armenian language
104 2007-04-26 Uwe Stöhr <uwestoehr@web.de>
106 * format incremented to 265: fix LyX's table border line handling
107 With the fix (see bug 1746) LyX now takes care if the user has entered
108 a "|" character in the argument field of tables. Therefore the "|"
109 character has to be removed when also a table border is set.
111 2007-04-24 José Matos <jamatos@lyx.org>
113 * format incremented to 264:
114 textclass cv is renamed simplecv
116 2007-02-22 José Matos <jamatos@lyx.org>
118 * format incremented to 263: changes in the language names (overdue):
120 portuges -> portuguese
122 2007-02-16 Georg Baum <Georg.Baum@post.rwth-aachen.de>
124 * format incremented to 262: Allow ascii \inputencoding
126 2007-02-14 Georg Baum <Georg.Baum@post.rwth-aachen.de>
128 * format incremented to 261: \output_changes is now considered
129 even if \tracking_changes is false. This allows to output existing
130 changes even if future changes are not tracked anymore.
133 \tracking_changes false
136 is therefore converted to
138 \tracking_changes false
139 \output_changes false
141 on upgrade. Nothing is done on downgrade since the new behaviour is
142 not supported in older formats.
144 2007-02-13 Georg Baum <Georg.Baum@post.rwth-aachen.de>
146 * format incremented to 260: Allow utf8x \inputencoding
148 2007-02-12 Georg Baum <Georg.Baum@post.rwth-aachen.de>
150 * format incremented to 259:
151 Old: Spaces at start or end of font changes were output outside of
152 the font change, i.e. not 'xx\textbf{ yy }zz', but
154 New: Spaces are always output with the font set by the user.
156 2007-01-31 Uwe Stöhr <uwestoehr@web.de>
158 * format incremented to 258: new \lyxline definition
160 \\newcommand{\\lyxline}[1]{
161 {#1 \\vspace{1ex} \\hrule width \\columnwidth \\vspace{1ex}}
164 \\newcommand{\\lyxline}[1][1pt]{%
166 \\rule[.5ex]{\\linewidth}{#1}\\par}
167 The new definition is more robust, see bug 1988 and now really takes care about
168 the fontsize: \lyxline{\Huge} produces now a thicker line then \lyxline{\normalfont}
170 2007-01-29 Georg Baum <Georg.Baum@post.rwth-aachen.de>
172 * format incremented to 257: Caption styles have been replaced by
173 InsetCaption. This is at the same time also a layout file format
174 change to format 3. layout2layout removes caption layouts from old
176 Note that InsetCaption did exist before this format, but was never
177 used. Old files containing do nevertheless still work.
178 Of course users can still define a Caption style in layout files,
179 but the special treatment in LyX is gone (apart from the sensitive
182 2006-12-22 Georg Baum <Georg.Baum@post.rwth-aachen.de>
184 * format incremented to 256: allow some new inputenc settings.
185 For the complete list, see lib/lyx2lyx/lyx_1_5.py.
187 2006-11-25 Georg Baum <Georg.Baum@post.rwth-aachen.de>
189 * format incremented to 255: new insets for \clearpage and
190 \cleardoublepage. They are written inline to the file, exactly like
193 2006-11-13 Georg Baum <Georg.Baum@post.rwth-aachen.de>
195 * format incremented to 254: new header parameter \use_esint.
196 It can have the same values as \use_amsmath: 0 (off), 1 (auto) and
199 2006-10-18 Georg Baum <Georg.Baum@post.rwth-aachen.de>
201 * format incremented to 253: new nomenclature and printnomenclature
202 insets. These are standard InsetCommand with the following parameters:
203 \nomenclature[prefix]{symbol}{description}
204 \printnomenclature[labelwidth]
206 2006-10-15 Georg Baum <Georg.Baum@post.rwth-aachen.de>
208 * format incremented to 252: changed command inset syntax
212 \begin_inset LatexCommand \cmdname[opt1][opt2]{arg}
223 \begin_inset LatexCommand cmdname
230 The order of the parameters and for each parameter the name and
231 optional/required bit is now stored in InsetCommandParams.
233 2006-10-03 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
235 * format incremented to 251: save show_label param for charstyles.
237 On revert, the show_label param is just removed. Nothing to convert.
239 2006-10-12 Martin Vermeer <martin.vermeer@hut.fi>
241 * Format incremented to 250: allow optional arg to environments
243 No material format change. Now optargs for environments are allowed
244 to be specified in layout files and will be handled properly. When
245 converted back to older formats, they will be ignored in LaTeX
248 2006-08-14 Georg Baum <Georg.Baum@post.rwth-aachen.de>
250 * format incremented to 249: Unicode
252 LyX documents are now always encoded in utf8. The value of
253 \inputencoding does now only determine the encoding of the created
255 Up to format 248 the value of \inputencoding did also determine the
256 encoding of the LyX file:
258 \inputencoding LyX file encoding
259 auto as determined by the document and character
262 everything else as determined by \inputencoding
264 The difference between auto and default is only the LaTeX output:
265 auto causes loading of the inputenc package, default does not.
267 2006-07-03 Georg Baum <Georg.Baum@post.rwth-aachen.de>
269 * format incremented to 248: Basic booktabs support
271 The <features> tag has a new switch: booktabs="true|false".
272 An absent switch is equivalent to booktabs="false".
273 Horizontal lines are set with the booktabs package if this switch
276 The <row> tag of tabulars has the following new attributes:
277 topspace, bottomspace and interlinespace. All take a LyXLength
278 as value, or the special keyword "default".
280 2006-06-10 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
282 * format incremented to 247. The Grand Font Interface Rewrite.
283 (1) Split font selection to rm, sf, tt:
284 \fontscheme -> \font_roman, \font_sans, \font_typewriter
286 \fontscheme \font_roman \font_sans \font_typewriter
287 default default default default
288 ae ae default default
289 times times default default
290 palatino palatino default default
291 helvet default helvet default
292 avant default avant default
293 newcent newcent default default
294 bookman bookman default default
295 pslatex times (or \usepackage{pslatex})
297 \font_roman: cmr (-> \renewcommand{\rmdefault}{cmr}),
298 lmodern, charter, utopia, ccfonts, chancery, beraserif
299 (-> \usepackage{<name>})
300 \font_sans: cmss, lmss, cmbr
301 (-> \renewcommand{\sfdefault}{<name>})
302 berasans (-> \usepackage{<name>})
303 \font_typewriter: cmtt, lmtt, cmtl,
304 (-> \renewcommand{\sfdefault}{<name>})
305 courier, luximono, beramono
306 (-> \usepackage{<name>})
307 (2) New param \font_default_family (rmdefault, sfdefault, ttdefault)
308 (3) New param \font_sc (true, false).
309 (4) New param \font_osf (true, false).
310 (5) New param \font_sf_scale (float)
311 (6) New param \font_tt_scale (float)
312 Support for the following fonts has been added:
313 bera, ccfonts, chancery, charter, cmbright, computer modern (explicitely),
314 courier, lmodern, luximono, utopia.
315 Support for the following font has been removed:
316 pslatex (it's superseded by mathptmx (times)).
318 2006-06-03 Martin Vermeer <martin.vermeer@hut.fi>
320 * format incremented to 246. The framed.sty package is
321 now supported with note types framed and shaded.
323 2005-10-12 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
325 * format incremented to 245. The \quotes_times parameter
328 2005-09-24 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
330 * format incremented to 244. Rename '\InsetSpace \,'
331 to '\InsetSpace \thinspace{}', because the comma was
332 not parsed by lyxlex, and '\InsetSpace \space' to
333 '\InsetSpace \space{}' in favour of consistency.
335 2005-07-18 José Matos <jamatos@lyx.org>
337 * format incremented to 243.
339 * this change only affects the preamble, the paperpackage
340 option was removed and papersize is changed to default.
342 2005-06-21 Jean-Marc Lasgouttes <lasgouttes@lyx.org>
344 * format incremented to 242. There is no file format per
345 se, but the "frenchb" language has been removed from lib/language
346 and has to be translated to "french" by lyx2lyx.
348 2005-02-03 Georg Baum <Georg.Baum@post.rwth-aachen.de>
350 * format incremented to 241.
352 All following changes apply only to text in ERT insets. The
353 rationale is that text in ERT is simply ASCII text, and nothing more.
355 * paragraph breaks are now a single newline in latex and not a
356 paragraph break anymore (bug 698).
357 * \newline is not allowed anymore, because it is redundant (see above)
358 * layouts other than Standard, paragraph parameters and font changes
359 are not allowed anymore. They never made sense and were ignored for
360 latex output, but now they can't be read or set anymore (bug 922).
363 2005-01-23 Jürgen Spitzmüller <j.spitzmüller@gmx.de>
365 * format incremented to 240.
367 \output_changes {true|false}
368 (should the change tracking marks be visible in the output or not?)
369 * lyx2lyx should just delete the param in 239.
371 2005-01-06 José Matos <jamatos@lyx.org>
373 * format incremented to 239.
374 * the paragraph parameters are displayed in their own line. This
375 change is consistent with the insets behaviour, and corresponds
376 to a more uniform treatment of the paragraphs since some of them
377 had already their own line.
379 An example of a single paragraph follows:
381 \begin_layout Standard
382 \paragraph_spacing single
388 2004-12-03 José Matos <jamatos@lyx.org>
390 * format incremented to 238.
391 * The compatibility code to read old latex accents from 0.12.x in
392 InsetLatexAccent::checkContents has been removed.
393 The following translations are done:
395 "\i \xy" -> "\i \x{y}"
396 "\i \x y" -> "\i \x{y}"
397 "\i \x\i" -> "\i \x{\i}"
398 "\i \x\j" -> "\i \x{\j}"
399 x is a latex accent command, y the base character. \, i and j are
401 lyx did these changes already from 0.12.x -> 215, but not lyx2lyx,
402 so formats 215 - 237 can have both versions.
405 2004-10-10 José Matos <jamatos@lyx.org>
407 * format incremented to 237.
408 * In the header, the following statments use now booleans values,
414 2004-08-15 José Matos <jamatos@lyx.org>
416 * format incremented to 236.
423 * The options for \papersize are changed:
426 * All whitespaces are removed at the end of lines, when
427 not necessary. As an example we have all the lines in the header that
428 do not belong to the preamble.
430 2004-07-01 Georg Baum <Georg.Baum@post.rwth-aachen.de>
432 * format incremented to 235.
433 * \paperpackage had an off-by-one error. Translation table:
435 234: a4 a4wide widemarginsa4
436 235: none a4 a4wide widemarginsa4
438 The "widemarginsa4" setting of 235 has no equivalent in 234.
440 2004-05-12 Angus Leeming <leeming@lyx.org>
442 * format incremented to 234.
443 * the citation engine is specified explicitly rather than being
444 deduced from 3 bools.
447 \use_numerical_citations 0 -> \cite_engine <style>
450 where <style> is one of "basic", "natbib_authoryear",
451 "natbib_numerical" or "jurabib".
453 2004-04-29 Georg Baum <Georg.Baum@post.rwth-aachen.de>
455 * format incremented to 233.
456 * insetgraphics does not allow filenames without extension anymore.
457 The complete filename has to be given.
459 2004-03-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
461 * format incremented to 232.
463 * Support for bibtopic (sectioned bibliographies).
464 - bufferparam \use_bibtopic [1|0]
465 - the bibtex inset has a second argument for bibtopic's
466 btPrint{Cited|NotCited|All} command:
468 \begin_inset LatexCommand \bibtex[<style>]{<database>}
470 \begin_inset LatexCommand \bibtex[<style>][<btPrintX>]{<database>}
471 Forwards, there's nothing to be done. Backwards, \usepackage[dot]{bibtopic}
472 has to be inserted to the preamble. Instead of the bibtex inset, the LaTeX
473 \bibliographystyle{<style>}
474 \begin{btSect}{<database>}
479 2004-03-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
481 * format incremented to 231.
483 * Support for sidewaysfigure/sidewaystable (rotating package).
484 insetfloat has now a param \sideways [true|false] (default is false).
485 The param should be erased on downwards conversion, if it was true,
486 the inset should be replaced by
487 \begin{sidewaysfigure} <content> \end{sidewaysfigure}
489 \begin{sidewaystable} <content> \end{sidewaystable}
492 2004-02-23 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
494 * format incremented to 230.
496 * Support for a second optional argument in insetcommand.
497 currently, citation uses this to support natbibs second
498 optional argument \cite[before][after]{key}.
499 I think there's nothing to convert upwards. Downwards, the
500 commands with 2 optional args need to be converted to ERT.
502 * Support for jurabib (param \use_jurabib [1|0], default is 0).
503 When converting downwards, \usepackage{jurabib} has to be added
504 to the preamble and, if babel is used, \usepackage{babel} before
505 (jurabib fails if babel is called afterwards). If the natbib commands
506 are used together with jurabib, they have to be converted to ERT too.
508 2003-12-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
510 * format incremented to 229.
511 * Minipages cannot be read anymore. All minipage insets will
512 be converted to frameless box insets between 228->229.
514 2003-12-15 Angus Leeming <leeming@lyx.org>
516 * format incremented to 228.
517 * Change the output of all insets derived from InsetCollapsable
518 except for InsetERT (which has a similar output already), changing lines
519 "collapsed true" -> "status collapsed"
520 "collapsed false" -> "status open".
521 * Change the output of InsetERT, changing lines
522 "status Collapsed" -> "status collapsed"
523 "status Open" -> "status open".
524 "status Inlined" -> "status inlined".
526 2003-12-10 Angus Leeming <leeming@lyx.org>
528 * format NOT incremented.
529 * add a 'draft' option to InsetExternal.
531 2003-12-10 Angus Leeming <leeming@lyx.org>
533 * format incremented to 227.
534 * Change the output of InsetBox:
535 \begin_inset Boxed -> \begin_inset Box Boxed
536 \begin_inset Doublebox -> \begin_inset Box Doublebox
537 \begin_inset Frameless -> \begin_inset Box Frameless
538 \begin_inset ovalbox -> \begin_inset Box ovalbox
539 \begin_inset Ovalbox -> \begin_inset Box Ovalbox
540 \begin_inset Shadowbox -> \begin_inset Box Shadowbox
542 2003-12-10 Angus Leeming <leeming@lyx.org>
544 * format incremented to 226.
545 * Change the output of InsetNote:
546 \begin_inset Note -> \begin_inset Note Note
547 \begin_inset Comment -> \begin_inset Note Comment
548 \begin_inset Greyedout -> \begin_inset Note Greyedout
550 2003-11-28 André Pönitz
552 * Remove space_above/space_below from Paragraph.
553 This is now handled by InsetVSpace.
555 2003-10-07 Angus Leeming <leeming@lyx.org>
557 * Add transformations to InsetExternal
559 boundingBox 0 0 20 20 the dimensions of the B.B..
560 Output if the B.B. is not empty.
561 clip clip the image to the B.B.
563 extra LaTeX "draft" 'extra' data passed to the primary
564 command for this output format.
565 (Possible formats LaTeX, PDFLaTeX,
566 LinuxDoc, DocBook, Ascii.)
567 The string can contain spaces and so
569 rotateAngle 30 Rotation of the data.
570 Output for non-zero rotation only.
571 rotateOrigin bottomleft Rotation origin.
572 Output for non-zero rotation and
573 non-default origin (center) only.
575 width 2cm Output only if the image is resized.
579 2003-10-07 Martin Vermeer <martin.vermeer@hut.fi>
581 * Added box inset. File format:
583 \begin_inset Ovalbox Boxed/Frameless/ovalbox/Ovalbox
588 inner_pos "b" t/c/b/s
590 width "100col%" unit+width-string
591 special "none" none/height/depth
593 height "1in" unit+width-string
594 height_special "totalheight" none/height/depth
596 collapsed false true/false
598 \begin_layout Standard
605 This box (Frameless, has_inner_box=1, use_parbox=0) replaces
606 the pre-existing Minipage inset. Parameters translate as follows:
607 position 0/1/2 -> t/c/b
608 inner_position 0/1/2/3 -> inner_pos c/t/b/s
613 2003-08-19 Michael Schmitt <michael.schmitt@teststep.org>
615 * attribute valignment="center" is replaced by valignment="middle"
616 for tabular columns and cells
618 2003-08-17 Martin Vermeer <martin.vermeer@hut.fi>
620 * Added branch inset. File format:
622 branch definition in the header:
628 \begin_inset Branch <branchname>
629 collapsed false true/false
631 \begin_layout Standard
638 2003-07-28 José Matos <jamatos@lyx.org>
640 * \the_end is replaced with \end_document
642 2003-07-28 José Matos <jamatos@lyx.org>
644 * \layout is replaced with \begin_layout
646 2003-07-28 José Matos <jamatos@fep.up.pt>
650 * All layouts finish now with \end_layout
652 2003-06-04 Angus Leeming <leeming@lyx.org>
656 * the storage of the external inset has been changed from
658 \begin_inset External XFig,"file.fig",""
664 \begin_inset External
667 display <display_type>
672 throwing away the final arg (here "", more generally "<string>") that holds
673 the parameters variable.
674 Variables are output if present (filename) or different from the default
675 values (display, lyxscale).
677 Moreover, the RasterImage template has been scrapped. All RasterImage
678 external insets are now converted to Graphics insets.
680 2003-05-20 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
682 * Added new space insets:
683 \SpecialChar ~ is now \InsetSpace ~
684 ERT: "\ " could be converted to InsetSpace \<space>
685 ERT: "\," could be converted to InsetSpace \,
687 2003-04-24 André Pönitz <poenitz@gmx.net>
689 * Added eqref support:
690 \begin_inset LatexCommand \eqref{label}
692 2003-03-14 Dekel Tsur
694 * Format bumped to 223.
696 2003-03-12 John Levon <levon@movementarian.org>
698 * Added \\end_header to signify the end of the header in a
701 * use_amsmath is now a tristate {0 = never, 1 = auto, 2 = always}
703 2003-02-10 John Levon <levon@movementarian.org>
707 Added \\tracking_changes 0|1 to the header.
709 Added \\author to the header. This can be present multiple
710 times, and is of the form :
712 \\author "Real Name" email@address.com
714 Added \\change_deleted, \\change_inserted. Each of these does not
715 span a paragraph, and is delimited by "\\change_unchanged\n". Both are
718 \\change_inserted author time
720 where author is an integer ID reference into the author list in
721 the header, and time is time_t.
723 2002-10-24 Rob Lahaye <lahaye@snu.ac.kr>
725 * InsetGraphicsParams.h (scale): is now a float, not an unsigned int.
727 2002-08-22 Rob Lahaye <lahaye@snu.ac.kr>
729 New graphics dialog. With the removal of buttons in the dialog, also
730 keywords in the graphics inset went. The following keywords do not
740 Only non-default values are saved to the lyx files. The defaults of the remaining
750 BoundingBox <from file>
753 rotateOrigin centerBaseline
755 subcaptionText <empty>
758 The remaining keywords have sufficient overlap with the old ones for a
759 smooth reading of the 1.2.x inset keywords in most common cases.
761 Compatibility is certainly broken for the old lyxwidth/lyxheight keywords.
762 They don't exist anymore and we can't translate them into a scaling value, while
763 we're reading the graphics inset. The old lyxwidth/lyxheight keyword and its
764 argument is ignored and lost.
766 Only few compatibility issues are left for lyx2lyx:
768 ------------------------------------------------------------------------------
769 old-token new-token remove
770 ------------------------------------------------------------------------------
771 size_kind original / size_type 0 scale 100 width <val>
775 size_kind width_height / size_type 1 - scale <val>
777 lyxsize_kind original / lyxsize_type 0 lyxscale 100 lyxscale <val>
778 ------------------------------------------------------------------------------
779 [replace old-token by new-token, and remove any of subsequent tokens as listed]
781 If "rotate" is absent, lyx2lyx should ignore "rotateAngle <val>":
782 if ( "rotateAngle <val>" is there WITHOUT being preceded by the keyword "rotate" )
784 replace "rotateAngle <val>" by "rotateAngle 0"
787 2002-08-12 Andre' Poenitz <poenitz@gmx.de>
789 Added \lyxlock for locked math inset when written to .lyx file.
790 When "downgrading" .lyx files this should simple be deleted but it
791 does not hurt at all if it stays in. It does not have to be added
795 2002-08-02 Angus Leeming <leeming@lyx.org>
797 Added a boolean "preview" flag to InsetCommandParams.
798 Currently it is written only by InsetInclude, because only this
799 class can generate a preview of its contents.
801 The LyX file now contains:
803 \begin_inset Include \input{snapshot_t=40.tex}
808 Earlier versions of LyX just swallow this extra token silently.
810 2002-08-12 Angus Leeming <leeming@lyx.org>
812 The 1.2.0 InsetGraphicsParams "size_type" and "lyxsize_type" have been
813 renamed as "size_kind" and "lyxsize_kind" respectively.
815 \begin_inset Graphics FormatVersion 1
822 - lyxsize_kind original
823 + lyxsize_type original