1 LyX file-format changes
2 -----------------------
5 * Format incremented to 286: LyX now supports hyperref and some
9 * Format incremented to 285: ???
11 2007-09-09 Helge Hafting
12 * Format incremented to 284: LyX now implements wrapped figures
13 using wrapfig.sty instead of floatflt.sty. The latter
14 is rather buggy, the former also has more options.
15 No conversion as the .lyx doesn't change.
16 The .tex export is slightly different, necessitating the
19 2007-09-08 Martin Vermeer
21 * format incremented to 283: CharStyle insets are now
26 * format incremented to 282: lyx files can be zipfiles with
29 2007-08-29 Richard Heck
31 * format incremented to 281: allow modules for layout files.
33 2007-08-17 Martin Vermeer
35 * format incremented to 280: the show_label parameter
36 is depreciated in favour of (Collapsable) status.
38 2007-08-17 Martin Vermeer
40 * format incremented to 279: CharStyle names are now
41 expected to be of form CharStyle:Name.
45 * format incremented to 278: Close begin_deeper with a
46 corresponding end_deeper (the only case where it matters is
47 at the end of the body).
51 * format incremented to 277: lyx is able to create invalid
52 table where a multicolumn does not have a first cell
53 (required by the table file format)
55 2007-07-20 Dov Feldstern <dov@lyx.org>
57 * format *not* incremented; fixed format 249 conversion, so that it now
58 correctly deals with encodings in footnotes (part of bug 3613)
60 2007-06-26 Uwe Stöhr <uwestoehr@web.de> and Dov Feldstern <dov@lyx.org>
62 * format incremented to 276: switching exsting language 'arabic' to
63 'arabic_arabtex'; this is to differentiate from the new arabic support
64 using the arabi package.
66 2007-05-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
68 * format incremented to 275: add graphics params scaleBeforeRotation
71 2007-06-13 Dov Feldstern <dov@lyx.org>
72 * format incremented to 274: applying the conversion done in format 259
73 to the \lang property, which was forgotten back then... This is
74 slightly more complicated, because the default language has to be
75 determined on a per-paragraph basis.
77 2007-06-13 Bo Peng <ben.bob@gmail.com>
78 * format incremented to 273: add --Separator-- environment to
79 separate consecutive environments
81 2007-06-13 Bo Peng <bpeng@lyx.org>
82 * format incremented to 272: convert listings to ERT because
83 earlier versions of lyx can not handle unrecognizable
86 2007-05-15 José Matos <jamatos@lyx.org>
87 * format incremented to 271: extended textclasses accept the
88 normal font sizes: 10, 11 and 12pt.
90 2007-05-14 Martin Vermeer <martin.vermeer@tkk.fi>
91 * format incremented to 270: support beamer \alert, \structure
93 2007-05-08 Bo Peng <ben.bob@gmail.com>
94 * format incremented to 269: add listings support
95 - add preamble flag \listings_params, e.g. \listings_params "language=Python,float"
96 - add inset listings, with options lstparams and inline, e.g.
98 lstparams "xleftmargin=50pt,language=Python"
100 - add \lstinputlisting Include type. e.g.
101 \begin_inset Include \lstinputlisting{newfile1.lyx}[firstline=10,lastline=15]
103 2007-05-06 Uwe Stöhr <uwestoehr@web.de>
105 * format incremented to 268: add support for the CJK encodings
106 - all encodings supported by CJK.sty are now in lib/encodings
107 - lib/encoding has got two new flags:
109 "inputenc" for those languages that use the inputenc-package and
110 "CJK" for the CJK encodings
111 - "fixed"/"variable" to divide between multi- or single-byte encoding
112 - lib/languages allows now to set an empty language for babel
113 in this case babel isn't called.
115 2007-05-04 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
117 * format incremented to 267: add plain utf8 encoding (for XeTeX).
119 2007-04-29 Uwe Stöhr <uwestoehr@web.de>
121 * format incremented to 266:
122 Support for the Armenian language
124 2007-04-26 Uwe Stöhr <uwestoehr@web.de>
126 * format incremented to 265: fix LyX's table border line handling
127 With the fix (see bug 1746) LyX now takes care if the user has entered
128 a "|" character in the argument field of tables. Therefore the "|"
129 character has to be removed when also a table border is set.
131 2007-04-24 José Matos <jamatos@lyx.org>
133 * format incremented to 264:
134 textclass cv is renamed simplecv
136 2007-02-22 José Matos <jamatos@lyx.org>
138 * format incremented to 263: changes in the language names (overdue):
140 portuges -> portuguese
142 2007-02-16 Georg Baum <Georg.Baum@post.rwth-aachen.de>
144 * format incremented to 262: Allow ascii \inputencoding
146 2007-02-14 Georg Baum <Georg.Baum@post.rwth-aachen.de>
148 * format incremented to 261: \output_changes is now considered
149 even if \tracking_changes is false. This allows to output existing
150 changes even if future changes are not tracked anymore.
153 \tracking_changes false
156 is therefore converted to
158 \tracking_changes false
159 \output_changes false
161 on upgrade. Nothing is done on downgrade since the new behaviour is
162 not supported in older formats.
164 2007-02-13 Georg Baum <Georg.Baum@post.rwth-aachen.de>
166 * format incremented to 260: Allow utf8x \inputencoding
168 2007-02-12 Georg Baum <Georg.Baum@post.rwth-aachen.de>
170 * format incremented to 259:
171 Old: Spaces at start or end of font changes were output outside of
172 the font change, i.e. not 'xx\textbf{ yy }zz', but
174 New: Spaces are always output with the font set by the user.
176 2007-01-31 Uwe Stöhr <uwestoehr@web.de>
178 * format incremented to 258: new \lyxline definition
180 \\newcommand{\\lyxline}[1]{
181 {#1 \\vspace{1ex} \\hrule width \\columnwidth \\vspace{1ex}}
184 \\newcommand{\\lyxline}[1][1pt]{%
186 \\rule[.5ex]{\\linewidth}{#1}\\par}
187 The new definition is more robust, see bug 1988 and now really takes care about
188 the fontsize: \lyxline{\Huge} produces now a thicker line then \lyxline{\normalfont}
190 2007-01-29 Georg Baum <Georg.Baum@post.rwth-aachen.de>
192 * format incremented to 257: Caption styles have been replaced by
193 InsetCaption. This is at the same time also a layout file format
194 change to format 3. layout2layout removes caption layouts from old
196 Note that InsetCaption did exist before this format, but was never
197 used. Old files containing do nevertheless still work.
198 Of course users can still define a Caption style in layout files,
199 but the special treatment in LyX is gone (apart from the sensitive
202 2006-12-22 Georg Baum <Georg.Baum@post.rwth-aachen.de>
204 * format incremented to 256: allow some new inputenc settings.
205 For the complete list, see lib/lyx2lyx/lyx_1_5.py.
207 2006-11-25 Georg Baum <Georg.Baum@post.rwth-aachen.de>
209 * format incremented to 255: new insets for \clearpage and
210 \cleardoublepage. They are written inline to the file, exactly like
213 2006-11-13 Georg Baum <Georg.Baum@post.rwth-aachen.de>
215 * format incremented to 254: new header parameter \use_esint.
216 It can have the same values as \use_amsmath: 0 (off), 1 (auto) and
219 2006-10-18 Georg Baum <Georg.Baum@post.rwth-aachen.de>
221 * format incremented to 253: new nomenclature and printnomenclature
222 insets. These are standard InsetCommand with the following parameters:
223 \nomenclature[prefix]{symbol}{description}
224 \printnomenclature[labelwidth]
226 2006-10-15 Georg Baum <Georg.Baum@post.rwth-aachen.de>
228 * format incremented to 252: changed command inset syntax
232 \begin_inset LatexCommand \cmdname[opt1][opt2]{arg}
243 \begin_inset LatexCommand cmdname
250 The order of the parameters and for each parameter the name and
251 optional/required bit is now stored in InsetCommandParams.
253 2006-10-03 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
255 * format incremented to 251: save show_label param for charstyles.
257 On revert, the show_label param is just removed. Nothing to convert.
259 2006-10-12 Martin Vermeer <martin.vermeer@hut.fi>
261 * Format incremented to 250: allow optional arg to environments
263 No material format change. Now optargs for environments are allowed
264 to be specified in layout files and will be handled properly. When
265 converted back to older formats, they will be ignored in LaTeX
268 2006-08-14 Georg Baum <Georg.Baum@post.rwth-aachen.de>
270 * format incremented to 249: Unicode
272 LyX documents are now always encoded in utf8. The value of
273 \inputencoding does now only determine the encoding of the created
275 Up to format 248 the value of \inputencoding did also determine the
276 encoding of the LyX file:
278 \inputencoding LyX file encoding
279 auto as determined by the document and character
282 everything else as determined by \inputencoding
284 The difference between auto and default is only the LaTeX output:
285 auto causes loading of the inputenc package, default does not.
287 2006-07-03 Georg Baum <Georg.Baum@post.rwth-aachen.de>
289 * format incremented to 248: Basic booktabs support
291 The <features> tag has a new switch: booktabs="true|false".
292 An absent switch is equivalent to booktabs="false".
293 Horizontal lines are set with the booktabs package if this switch
296 The <row> tag of tabulars has the following new attributes:
297 topspace, bottomspace and interlinespace. All take a LyXLength
298 as value, or the special keyword "default".
300 2006-06-10 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
302 * format incremented to 247. The Grand Font Interface Rewrite.
303 (1) Split font selection to rm, sf, tt:
304 \fontscheme -> \font_roman, \font_sans, \font_typewriter
306 \fontscheme \font_roman \font_sans \font_typewriter
307 default default default default
308 ae ae default default
309 times times default default
310 palatino palatino default default
311 helvet default helvet default
312 avant default avant default
313 newcent newcent default default
314 bookman bookman default default
315 pslatex times (or \usepackage{pslatex})
317 \font_roman: cmr (-> \renewcommand{\rmdefault}{cmr}),
318 lmodern, charter, utopia, ccfonts, chancery, beraserif
319 (-> \usepackage{<name>})
320 \font_sans: cmss, lmss, cmbr
321 (-> \renewcommand{\sfdefault}{<name>})
322 berasans (-> \usepackage{<name>})
323 \font_typewriter: cmtt, lmtt, cmtl,
324 (-> \renewcommand{\sfdefault}{<name>})
325 courier, luximono, beramono
326 (-> \usepackage{<name>})
327 (2) New param \font_default_family (rmdefault, sfdefault, ttdefault)
328 (3) New param \font_sc (true, false).
329 (4) New param \font_osf (true, false).
330 (5) New param \font_sf_scale (float)
331 (6) New param \font_tt_scale (float)
332 Support for the following fonts has been added:
333 bera, ccfonts, chancery, charter, cmbright, computer modern (explicitely),
334 courier, lmodern, luximono, utopia.
335 Support for the following font has been removed:
336 pslatex (it's superseded by mathptmx (times)).
338 2006-06-03 Martin Vermeer <martin.vermeer@hut.fi>
340 * format incremented to 246. The framed.sty package is
341 now supported with note types framed and shaded.
343 2005-10-12 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
345 * format incremented to 245. The \quotes_times parameter
348 2005-09-24 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
350 * format incremented to 244. Rename '\InsetSpace \,'
351 to '\InsetSpace \thinspace{}', because the comma was
352 not parsed by lyxlex, and '\InsetSpace \space' to
353 '\InsetSpace \space{}' in favour of consistency.
355 2005-07-18 José Matos <jamatos@lyx.org>
357 * format incremented to 243.
359 * this change only affects the preamble, the paperpackage
360 option was removed and papersize is changed to default.
362 2005-06-21 Jean-Marc Lasgouttes <lasgouttes@lyx.org>
364 * format incremented to 242. There is no file format per
365 se, but the "frenchb" language has been removed from lib/language
366 and has to be translated to "french" by lyx2lyx.
368 2005-02-03 Georg Baum <Georg.Baum@post.rwth-aachen.de>
370 * format incremented to 241.
372 All following changes apply only to text in ERT insets. The
373 rationale is that text in ERT is simply ASCII text, and nothing more.
375 * paragraph breaks are now a single newline in latex and not a
376 paragraph break anymore (bug 698).
377 * \newline is not allowed anymore, because it is redundant (see above)
378 * layouts other than Standard, paragraph parameters and font changes
379 are not allowed anymore. They never made sense and were ignored for
380 latex output, but now they can't be read or set anymore (bug 922).
383 2005-01-23 Jürgen Spitzmüller <j.spitzmüller@gmx.de>
385 * format incremented to 240.
387 \output_changes {true|false}
388 (should the change tracking marks be visible in the output or not?)
389 * lyx2lyx should just delete the param in 239.
391 2005-01-06 José Matos <jamatos@lyx.org>
393 * format incremented to 239.
394 * the paragraph parameters are displayed in their own line. This
395 change is consistent with the insets behaviour, and corresponds
396 to a more uniform treatment of the paragraphs since some of them
397 had already their own line.
399 An example of a single paragraph follows:
401 \begin_layout Standard
402 \paragraph_spacing single
408 2004-12-03 José Matos <jamatos@lyx.org>
410 * format incremented to 238.
411 * The compatibility code to read old latex accents from 0.12.x in
412 InsetLatexAccent::checkContents has been removed.
413 The following translations are done:
415 "\i \xy" -> "\i \x{y}"
416 "\i \x y" -> "\i \x{y}"
417 "\i \x\i" -> "\i \x{\i}"
418 "\i \x\j" -> "\i \x{\j}"
419 x is a latex accent command, y the base character. \, i and j are
421 lyx did these changes already from 0.12.x -> 215, but not lyx2lyx,
422 so formats 215 - 237 can have both versions.
425 2004-10-10 José Matos <jamatos@lyx.org>
427 * format incremented to 237.
428 * In the header, the following statments use now booleans values,
434 2004-08-15 José Matos <jamatos@lyx.org>
436 * format incremented to 236.
443 * The options for \papersize are changed:
446 * All whitespaces are removed at the end of lines, when
447 not necessary. As an example we have all the lines in the header that
448 do not belong to the preamble.
450 2004-07-01 Georg Baum <Georg.Baum@post.rwth-aachen.de>
452 * format incremented to 235.
453 * \paperpackage had an off-by-one error. Translation table:
455 234: a4 a4wide widemarginsa4
456 235: none a4 a4wide widemarginsa4
458 The "widemarginsa4" setting of 235 has no equivalent in 234.
460 2004-05-12 Angus Leeming <leeming@lyx.org>
462 * format incremented to 234.
463 * the citation engine is specified explicitly rather than being
464 deduced from 3 bools.
467 \use_numerical_citations 0 -> \cite_engine <style>
470 where <style> is one of "basic", "natbib_authoryear",
471 "natbib_numerical" or "jurabib".
473 2004-04-29 Georg Baum <Georg.Baum@post.rwth-aachen.de>
475 * format incremented to 233.
476 * insetgraphics does not allow filenames without extension anymore.
477 The complete filename has to be given.
479 2004-03-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
481 * format incremented to 232.
483 * Support for bibtopic (sectioned bibliographies).
484 - bufferparam \use_bibtopic [1|0]
485 - the bibtex inset has a second argument for bibtopic's
486 btPrint{Cited|NotCited|All} command:
488 \begin_inset LatexCommand \bibtex[<style>]{<database>}
490 \begin_inset LatexCommand \bibtex[<style>][<btPrintX>]{<database>}
491 Forwards, there's nothing to be done. Backwards, \usepackage[dot]{bibtopic}
492 has to be inserted to the preamble. Instead of the bibtex inset, the LaTeX
493 \bibliographystyle{<style>}
494 \begin{btSect}{<database>}
499 2004-03-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
501 * format incremented to 231.
503 * Support for sidewaysfigure/sidewaystable (rotating package).
504 insetfloat has now a param \sideways [true|false] (default is false).
505 The param should be erased on downwards conversion, if it was true,
506 the inset should be replaced by
507 \begin{sidewaysfigure} <content> \end{sidewaysfigure}
509 \begin{sidewaystable} <content> \end{sidewaystable}
512 2004-02-23 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
514 * format incremented to 230.
516 * Support for a second optional argument in insetcommand.
517 currently, citation uses this to support natbibs second
518 optional argument \cite[before][after]{key}.
519 I think there's nothing to convert upwards. Downwards, the
520 commands with 2 optional args need to be converted to ERT.
522 * Support for jurabib (param \use_jurabib [1|0], default is 0).
523 When converting downwards, \usepackage{jurabib} has to be added
524 to the preamble and, if babel is used, \usepackage{babel} before
525 (jurabib fails if babel is called afterwards). If the natbib commands
526 are used together with jurabib, they have to be converted to ERT too.
528 2003-12-29 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
530 * format incremented to 229.
531 * Minipages cannot be read anymore. All minipage insets will
532 be converted to frameless box insets between 228->229.
534 2003-12-15 Angus Leeming <leeming@lyx.org>
536 * format incremented to 228.
537 * Change the output of all insets derived from InsetCollapsable
538 except for InsetERT (which has a similar output already), changing lines
539 "collapsed true" -> "status collapsed"
540 "collapsed false" -> "status open".
541 * Change the output of InsetERT, changing lines
542 "status Collapsed" -> "status collapsed"
543 "status Open" -> "status open".
544 "status Inlined" -> "status inlined".
546 2003-12-10 Angus Leeming <leeming@lyx.org>
548 * format NOT incremented.
549 * add a 'draft' option to InsetExternal.
551 2003-12-10 Angus Leeming <leeming@lyx.org>
553 * format incremented to 227.
554 * Change the output of InsetBox:
555 \begin_inset Boxed -> \begin_inset Box Boxed
556 \begin_inset Doublebox -> \begin_inset Box Doublebox
557 \begin_inset Frameless -> \begin_inset Box Frameless
558 \begin_inset ovalbox -> \begin_inset Box ovalbox
559 \begin_inset Ovalbox -> \begin_inset Box Ovalbox
560 \begin_inset Shadowbox -> \begin_inset Box Shadowbox
562 2003-12-10 Angus Leeming <leeming@lyx.org>
564 * format incremented to 226.
565 * Change the output of InsetNote:
566 \begin_inset Note -> \begin_inset Note Note
567 \begin_inset Comment -> \begin_inset Note Comment
568 \begin_inset Greyedout -> \begin_inset Note Greyedout
570 2003-11-28 André Pönitz
572 * Remove space_above/space_below from Paragraph.
573 This is now handled by InsetVSpace.
575 2003-10-07 Angus Leeming <leeming@lyx.org>
577 * Add transformations to InsetExternal
579 boundingBox 0 0 20 20 the dimensions of the B.B..
580 Output if the B.B. is not empty.
581 clip clip the image to the B.B.
583 extra LaTeX "draft" 'extra' data passed to the primary
584 command for this output format.
585 (Possible formats LaTeX, PDFLaTeX,
586 LinuxDoc, DocBook, Ascii.)
587 The string can contain spaces and so
589 rotateAngle 30 Rotation of the data.
590 Output for non-zero rotation only.
591 rotateOrigin bottomleft Rotation origin.
592 Output for non-zero rotation and
593 non-default origin (center) only.
595 width 2cm Output only if the image is resized.
599 2003-10-07 Martin Vermeer <martin.vermeer@hut.fi>
601 * Added box inset. File format:
603 \begin_inset Ovalbox Boxed/Frameless/ovalbox/Ovalbox
608 inner_pos "b" t/c/b/s
610 width "100col%" unit+width-string
611 special "none" none/height/depth
613 height "1in" unit+width-string
614 height_special "totalheight" none/height/depth
616 collapsed false true/false
618 \begin_layout Standard
625 This box (Frameless, has_inner_box=1, use_parbox=0) replaces
626 the pre-existing Minipage inset. Parameters translate as follows:
627 position 0/1/2 -> t/c/b
628 inner_position 0/1/2/3 -> inner_pos c/t/b/s
633 2003-08-19 Michael Schmitt <michael.schmitt@teststep.org>
635 * attribute valignment="center" is replaced by valignment="middle"
636 for tabular columns and cells
638 2003-08-17 Martin Vermeer <martin.vermeer@hut.fi>
640 * Added branch inset. File format:
642 branch definition in the header:
648 \begin_inset Branch <branchname>
649 collapsed false true/false
651 \begin_layout Standard
658 2003-07-28 José Matos <jamatos@lyx.org>
660 * \the_end is replaced with \end_document
662 2003-07-28 José Matos <jamatos@lyx.org>
664 * \layout is replaced with \begin_layout
666 2003-07-28 José Matos <jamatos@fep.up.pt>
670 * All layouts finish now with \end_layout
672 2003-06-04 Angus Leeming <leeming@lyx.org>
676 * the storage of the external inset has been changed from
678 \begin_inset External XFig,"file.fig",""
684 \begin_inset External
687 display <display_type>
692 throwing away the final arg (here "", more generally "<string>") that holds
693 the parameters variable.
694 Variables are output if present (filename) or different from the default
695 values (display, lyxscale).
697 Moreover, the RasterImage template has been scrapped. All RasterImage
698 external insets are now converted to Graphics insets.
700 2003-05-20 Jürgen Spitzmüller <j.spitzmueller@gmx.de>
702 * Added new space insets:
703 \SpecialChar ~ is now \InsetSpace ~
704 ERT: "\ " could be converted to InsetSpace \<space>
705 ERT: "\," could be converted to InsetSpace \,
707 2003-04-24 André Pönitz <poenitz@gmx.net>
709 * Added eqref support:
710 \begin_inset LatexCommand \eqref{label}
712 2003-03-14 Dekel Tsur
714 * Format bumped to 223.
716 2003-03-12 John Levon <levon@movementarian.org>
718 * Added \\end_header to signify the end of the header in a
721 * use_amsmath is now a tristate {0 = never, 1 = auto, 2 = always}
723 2003-02-10 John Levon <levon@movementarian.org>
727 Added \\tracking_changes 0|1 to the header.
729 Added \\author to the header. This can be present multiple
730 times, and is of the form :
732 \\author "Real Name" email@address.com
734 Added \\change_deleted, \\change_inserted. Each of these does not
735 span a paragraph, and is delimited by "\\change_unchanged\n". Both are
738 \\change_inserted author time
740 where author is an integer ID reference into the author list in
741 the header, and time is time_t.
743 2002-10-24 Rob Lahaye <lahaye@snu.ac.kr>
745 * InsetGraphicsParams.h (scale): is now a float, not an unsigned int.
747 2002-08-22 Rob Lahaye <lahaye@snu.ac.kr>
749 New graphics dialog. With the removal of buttons in the dialog, also
750 keywords in the graphics inset went. The following keywords do not
760 Only non-default values are saved to the lyx files. The defaults of the remaining
770 BoundingBox <from file>
773 rotateOrigin centerBaseline
775 subcaptionText <empty>
778 The remaining keywords have sufficient overlap with the old ones for a
779 smooth reading of the 1.2.x inset keywords in most common cases.
781 Compatibility is certainly broken for the old lyxwidth/lyxheight keywords.
782 They don't exist anymore and we can't translate them into a scaling value, while
783 we're reading the graphics inset. The old lyxwidth/lyxheight keyword and its
784 argument is ignored and lost.
786 Only few compatibility issues are left for lyx2lyx:
788 ------------------------------------------------------------------------------
789 old-token new-token remove
790 ------------------------------------------------------------------------------
791 size_kind original / size_type 0 scale 100 width <val>
795 size_kind width_height / size_type 1 - scale <val>
797 lyxsize_kind original / lyxsize_type 0 lyxscale 100 lyxscale <val>
798 ------------------------------------------------------------------------------
799 [replace old-token by new-token, and remove any of subsequent tokens as listed]
801 If "rotate" is absent, lyx2lyx should ignore "rotateAngle <val>":
802 if ( "rotateAngle <val>" is there WITHOUT being preceded by the keyword "rotate" )
804 replace "rotateAngle <val>" by "rotateAngle 0"
807 2002-08-12 Andre' Poenitz <poenitz@gmx.de>
809 Added \lyxlock for locked math inset when written to .lyx file.
810 When "downgrading" .lyx files this should simple be deleted but it
811 does not hurt at all if it stays in. It does not have to be added
815 2002-08-02 Angus Leeming <leeming@lyx.org>
817 Added a boolean "preview" flag to InsetCommandParams.
818 Currently it is written only by InsetInclude, because only this
819 class can generate a preview of its contents.
821 The LyX file now contains:
823 \begin_inset Include \input{snapshot_t=40.tex}
828 Earlier versions of LyX just swallow this extra token silently.
830 2002-08-12 Angus Leeming <leeming@lyx.org>
832 The 1.2.0 InsetGraphicsParams "size_type" and "lyxsize_type" have been
833 renamed as "size_kind" and "lyxsize_kind" respectively.
835 \begin_inset Graphics FormatVersion 1
842 - lyxsize_kind original
843 + lyxsize_type original